The Facts Every Day in American Industry; Billions of Btu are Lost. (municipal solid waste from non-biogenic sources, and tire-derived fuels).
The Facts 20% - 50% of all fuel burned by American Industry is wasted. n Btu s Quadrillion US Renewable Energy Consumption by Source DOE/EIA Annual Energy Survey, 2006 (municipal solid waste from non-biogenic sources, and tire-derived fuels).
Imagine Imagine generating electricity from water no hotter than a cup of coffee, but on an industrial scale and with the best ROI in the industry.
Introducing ElectraTherm's award winning Green Machine. ElectraTherm s Green Machine captures this recoverable heat to make electricity with zero emissions. Distributed ib t by Pro Renewables. Authorized Dealer
How it works Expansion of Pressurized Vapor Produces Mechanical Power Liquid Heat Source Evaporator Heated Pressurized Vapor Twin Screw Expander Generator Rotation Produces Electricity Generator Low Pressure Vapor High Pressure Liquid Feed Pump Receiver Tank Condenser Low Pressure Liquid Cold Water Source ORC Refrigerant Loop
50 KW Green Machine Characteristics Hot Side Evaporator: Total sustained thermal power input required: 1.5 2.4 MMBTU/hr (430-735 kw) Hot water temperature range: 185 F min to 240 F max, target 230 F Hot water temperature drop: 15 F-30 F, target of 20 F Hot water flow: 150-170 GPM Pressure drops on the water side in the evaporator ranges from 3-7 PSI depending on flow.
50 KW Green Machine Characteristics Cold Side Condenser: Total heat rejection rate: 1.4 2.3 MMBTU/hr (400-665 kw) Condensing temperature: Cold-In at 130 F less than Hot-In; (70 F maximum Cold-In.) Maximize net output with greater delta T. Condensing water temperature rise: 15 F Condensing water flow: 150 to 250 GPM; Pressure drops on the water side in both evaporator and condenser range from 3-7 PSI depending on flow.
Twin Screw Expander Lubricated from within the ORC working fluid Eliminates the costly lubrication systems required for turbine based systems. No oil pumps, no oil changes. High efficiency at low rotational speeds Eliminates the costly gearing and delicate frequency inverter systems required with high speed turbines. Robust Construction Efficient and reliable under varying load conditions. Collectively, ET s technological improvements: Drastically lower maintenance costs Open new markets to small ORCs Fit a wide variety of applications due to modularity and scalability
Twin Screw Expander
Applications Stationary Engines Compressor Oil Water Treatment BIO Mass Compressors? BIO Gas District Heating? Geothermal?? Ethanol Plants? Hydrothermal Food Processing? Industrial Process Glass Gas Pressure Stations Heat Treatment? Solar Thermal Hot Oil and Gases Aluminum Smelter Mining?? Bio -Diesel Refineries Blow Molding Steam Boiler Blow Down Steam Condensation????? ElectraTherm, Inc. 2010 14
Applications Stationary Engine
Applications Stationary Engine
Applications Boilers Process Waste Heat Boiler Room
Applications Solar Thermal
Applications Geothermal
Applications Bio-Mass Boilers
Green Machine Summary Recycle waste heat to make fuel free emission free electricity. Only 3 moving components. Low maintenance: no oil changes. Plug and Play: 4 flanges, 3 wires. Fully automated controls. Remote monitoring available Skid mounted, modular and mobile. Stainless steel piping and HXs Scalable in size & flexible with heat and condensing temperatures.
Green Machine Awards 2007 Geothermal Energy Association Best of Show 2007 Geothermal Resources Council Annual Meeting Best Scientific Paper Award 2008 Popular Science Magazine Best of What s New Award Green Tech 2009 Wall Street Journal Technology Innovation Award Energy Category
Value added Site Evaluation Turn Key Installation Grant and Tax Incentives Financing ElectraTherm, Inc. 2010 23
Value added Site Evaluation
Value added Turn Key Installation Turn-Key Installation Best in Class Self Performing Pipefitters/Plumbers Millwrights Ironworkers HVAC/R Technicians Sheet metal Workers Sprinkler Fitters Electricians Boilermakers Crane Operators Preventative Maintenance Services Facility Management Services 24-Hour Emergency Services ElectraTherm, Inc. 2010 25
Value added Grant and Tax Incentives Pro Renewables can indentify, evaluate, prepare and submit your grant applications and tax credits to offset your company's capital investment in its facilities, energy efficiency, projects, and or renewable fuel systems. Assessment incentives for: Infrastructure expansion Tax abatement Pollution prevention Tax credits Renewable energy Energy efficiency measures ElectraTherm, Inc. 2010 26
Value added Financing Pro Renewables Financing can customize a program to fit your company s needs on payment schedule, term and type. Payment Options Step-Up and Step-Down 12 Payments Per Year Skip payments to Assist with Seasonal Cash Flow Term Options 24 month 36 month 48 month 60 month * other options available ailable upon request est and review ElectraTherm, Inc. 2010 27
Matt Yanik Sales and Business Development myanik@prorenewables.com (269) 492-6499 (877) 319-6522 Toll Free www.prorenewables.com