P60 HIGH FLOW GAS REGULATOR P60 HIGH FLOW GAS REGULATOR Stainless Steel Internals are Standard Steel Units comply with NACE MR0 Durable Powder Coated Exterior Wide Range of Flow Capacities The P60 is a spring loaded, direct-operated regulator for high pressure, and high flow applications. The heavy duty construction, made possible by the addition of stainless steel internal components and a powder-coated epoxy exterior finish, makes it ideally suited for the oil and gas industries. All P60 steel units meet NACE MR0 material requirements for corrosive (sour gas) environments. APPLICATIONS First cut or second stage regulator Farm taps Transmission to distribution bridge High pressure process Fuel Gas SPECIFICATIONS Maximum Inlet............................................ PSIG Outlet.................................................7 PSIG Body Sizes........................................... " NPT, NPT Orifice Sizes...................................... 8", 6", 4", 8", Outlet Ranges............................................Flow Range* Low Pressure: 0 PSIG....................................... 79,000 8 0 PSIG...................................... 8,000 7 0 PSIG..................................... 85,000 7 40 PSIG..................................... 85,000 7 50 PSIG............................... 85,000 46 95 PSIG............................... 9,000 90 50 PSIG............................,000 88,000 50 PSIG.........................., 90,000 PSIG.........................4, PSIG...........................6, 4,000 *(SCFH of 0.6 S.G. Natural Gas) Temp. Range................................ 0º to 50ºF ( 9º to 66ºC) Approximate Weight....................................." 0 lbs, 9 kg........................................ 5 lbs,.5 kg The P60 comes standard with durable stainless steel components for added corrosion protection and long life. All P60 steel units are manufactured to NACE MR0 standards. MATERIALS OF CONSTRUCTION Body, Bonnet........................................ Cast Iron or Steel Diaphragm.................................... Neoprene or Fluorocarbon Seat.................................................. Nylon or TFE Orifice............................................ 6 Stainless Steel FLOW CAPACITIES IN SCFH AT 0% DROOP 7 to 50 60 00 50 050 50 /8" 700 5 9 9 /6" 0 7 0, " BODY /4" 00 /8" 5 7 0, / 800 /8" 700 5 /6" 00 5 7 BODY /4" 5 /8" 5 7 6,000 88,000 / 8,000
P60 HIGH FLOW GAS REGULATOR 0 " BODY BODY /8" /6" /4" /8" / /8" /6" /4" /8" / 46 to 95 60 00 50 50 00 00 4 00 4 4 5 7 6 0 0 4 0 4 700 4 600 7 7 9 5 6 6 8 9 5 9 9 050 9 8.000 4,000 7,000 46 to 95 00 5 5 700 4 4 7 9 0 0 4 5 4 7 5 5 0 700 9 7 9 7,000,000 9,000 90 to 50 5 50 00 0 0 4 5 4 6 8 9 5 6 9 9 00 700 4 5 700 4 5 7 9 50 00 600 9, 6 7 90 to 50 50 5 4 5 6 4 6 8 8, 0 4 5 0 7 9 800 65,000 65 5 7 7 4, 4,000 8 8 79,000 79,000 90 to 50 50 4 5 700 7700 6 8 4 5 7 800 7 650 50 88,000 50 to 50 4 5 700 7 6 8 9 4 5 7 0 66,000 650 50 9, 7,000 45,000 FLOW CAPACITIES IN SCFH AT 0% DROOP
P60 HIGH FLOW GAS REGULATOR " BODY BODY /8" /6" /4" /8" / /8" /6" /4" /8" / 50 to 700 4 5 7 8 6,000 4 5 7,000 90,000 84,000 7,000 4,000 5,000 8,000 to 700 4 5 7700 8 4, 4 5 7 8 45,000 70,000 8,000 6,000 4,000 8,000 to 4 8 65,000 0 700 8 4,000 6,000 0,000 0, 06,000 to 55 7 4700 8 95,000 94,000 4 9 7,000 6,000 89,000 to 55 7 4 6 8 7 4 9 8 7,000 7,000 5,000 7,000 5,000 7,000 to 700 6 9 6,000 9 7,000 6,000 5,000 80,000 8,000 to 8 4,000 6,000 85,000 6,000 86,000 8,000 95,000 6,000 6,000 66,000 80,000 96,000 to 0 7,000 9,000 00,000 00,000 8,000 5,000 90,000 89,000 4,000 FLOW CAPACITIES IN SCFH AT 0% DROOP
P60 HIGH FLOW GAS REGULATOR P60 PART MATRIX BODY SIZE " P 6 0 SPRING RANGE PSIG BAR -0 0.-.7 8-0 0.6-.4 7-0.-. 7-40.9-.8 7-50.9-.5 46-95.-6.6 90-50 6.-0. 50-0.-.8 -.8-8.9-8.9-4.5 ORIFICE 8" 6" 4" 8" SEAT MATERIAL Nylon CTFE DIAPHRAGM Fluorocarbon Neoprene CASING MATERIAL Ductile Iron Steel (standard NACE) 0 0 08 6 BODY SIZE " 00 00 00 040 050 095 50 A B C D mm 9 9 98 9 inches 7.6 5.45 7.79.5 mm 07 98 5 45 inches 8. 5.68 8.45.90 E " NPT NPT F 9 4.67 9 4.67 "D" "F" "E" 4 6 8 "C" OUT 0 "B" P60R PART MATRIX P 6 0 R PORT SIZE " SPRING RANGE PSIG BAR 0-70.-4.8 50-95.4-6.6-5.-. 50-0.-7. DIAPHRAGM Fluorocarbon Neoprene CASING MATERIAL Ductile Iron Steel (standard NACE) P60 DIMENSIONS 0 8 0 08 6 "A" 070 095 IN 0 REGULATOR REBUILD KITS PART NUMBER KIT INCLUDES P60 High Pressure, Ranges 7-50 PSIG and above P60 Low Pressure, Ranges - 0 PSIG Thru 7-40 PSIG P60R Conversion Kit P60R Rebuild Kits Neoprene diaphragm, Nylon valve disk, one body gasket, and orifice gaskets Neoprene diaphragm, CTFE valve disk, one body gasket, and orifice gaskets Fluorocarbon diaphragm, Nylon valve disk, one body gasket, and orifice gaskets Fluorocarbon diaphragm, CTFE valve disk, one body gasket, and orifice gaskets Neoprene diaphragm, Nylon valve disk, one body gasket, and orifice gaskets Neoprene diaphragm, CTFE valve disk, one body gasket, and orifice gaskets Fluorocarbon diaphragm, Nylon valve disk, one body gasket, and orifice gaskets Fluorocarbon diaphragm, CTFE valve disk, one body gasket, and orifice gaskets Kit includes seat assembly and P60R orifice seat Neoprene diaphragm, orifice gaskets, seat assembly and P60R orifice seat Fluorocarbon diaphragm, orifice gaskets, seat assembly and P60R orifice seat 97-60-000 97-60-00 97-60- 97-60- 97-60- 97-60- 97-60- 97-60-700 97-65-000 97-60-R00 97-60-R0
P60 PARTS ITEM DESCRIPTION PART NUMBER Nameplate (requires 4 drive screws for mounting) 6-47-000 Drive Screw (4 required) 648-464-000 Adjusting Screw Spring Range -0 PSIG 8-0 PSIG 7-0 PSIG 7-40 PSIG 7-50 PSIG 46-95 PSIG 90-50 PSIG 50- PSIG - PSIG - PSIG 648-46-00 648-46-00 648-46-00 648-46-00 4 Hex Nut 64-000-056 5 6 Upper spring guide - Pressure range to PSIG Upper spring guide - Over PSIG Bonnet - Iron (7-50 PSIG thru - PSIG ranges) Bonnet - Steel (7-50 PSIG thru - PSIG ranges) Bonnet - Iron (-0 PSIG thru 7-40 PSIG ranges) Bonnet - Steel (-0 PSIG thru 7-40 PSIG ranges) 66-077-000 66-078-000 604-04-000 604-05-000 604--000 604-4-000 Range Spring Spring Range 7-0 & 7-50 PSIG Red Stripe 8-0 & 46-95 PSIG Olive Drab 7-0 & 90-50 PSIG Silver 655-659-000 655-659-00 655-659-00 7-40 & 50- PSIG Green Stripe 655-659-00 - PSIG Blue Stripe 655-659-004 - PSIG Yellow Stripe 655-659-005 8 Diaphragm Screw 648-46-000 9 Lower spring guide - -0 PSIG thru 7-40 PSIG ranges Lower spring guide - 7-50 PSIG thru - PSIG ranges Lower spring guide - - PSIG ranges 66-095-000 67-04-000 67-05-000 P60 HIGH FLOW GAS REGULATOR 0 Diaphragm - Neoprene (7-50 PSIG Thru - PSIG ranges) Diaphragm - Fluorocarbon ( required for 7-50 PSIG Thru - PSIG ranges) Diaphragm - Neoprene (-0 PSIG Thru 7-40 PSIG ranges) Diaphragm - Fluorocarbon ( required for -0 PSIG Thru 7-40 PSIG ranges) Hex nut for the iron diaphragm housing (4 required for ranges 7-50 PSIG or greater, 0 required for -0 PSIG thru 7-40 PSIG) 68-068-000 68-068-00 68-07-000 68-07-00 64-000- 4 5 Build Screw for the iron diaphragm housing (4 required for 7-50 PSIG Thru - PSIG ranges) Build Screw for the steel diaphragm housing (4 required for 7-50 PSIG Thru - PSIG ranges) Build Screw for the iron diaphragm housing (0 required for -0 PSIG Thru 7-40 PSIG ranges) Build Screw for the steel diaphragm housing (0 required for -0 PSIG Thru 7-40 PSIG ranges) Connector piston assembly Aluminum trim Connector piston assembly Stainless Steel trim Connector piston assembly Aluminum trim, NACE Connector piston assembly Stainless Steel trim, NACE Diaphragm housing - iron (7-50 PSIG Thru - PSIG ranges) Diaphragm housing - steel (7-50 PSIG Thru - PSIG ranges) Diaphragm housing - iron (-0 PSIG Thru 7-40 PSIG ranges) Diaphragm housing - steel (-0 PSIG Thru 7-40 PSIG ranges) Lever Assembly (7-50 PSIG Thru - PSIG ranges) Lever Assembly, NACE (7-50 PSIG Thru - PSIG ranges) Lever Assembly, All Low Pressure, (-0 PSIG Thru 7-40 PSIG ranges) 648-46-00 648-46-005 648-46-00 648-46-007 87-004-000 87-004-00 87-006-000 87-006-00 69-99-000 69--000 69-4-000 69-5-000 87-00-000 87-007-000 87-00-000 6 Pin 65-05-000 7 Gasket - Composite 64-056-000 8 Build screw (4 required) - " body Build screw (4 required) - body 648-46-004 648-46-006 ITEM DESCRIPTION PART NUMBER 9 Inlet adapter - " NPT steel Inlet adapter - NPT steel 679-06-000 679-07-000 Body - " NPT iron 805-08-00 0 Body - " NPT steel 805-08-000 Body - NPT iron 664-77-000 Body - NPT steel 664-79-000 Body Gaskets Composite ( required) 64-058-000 Orifice - 8" Orifice - 6" Orifice - 4" Orifice - 8" Orifice - Seat Assembly - SS holder/nylon disk Seat Assembly - SS holder/tfe disk 688-00-000 688-00-00 688-00-00 688-00-00 688-00-004 8-08-000 8-08-00 4 Valve Carrier 67-07-000 5 Build screw for steel diaphragm housing ( required) 648-46-00 6 Vent protector assembly 86-004-000 7 Cap screws (Body to Housing) not shown 648-46-00 8 NACE Tag (not shown-steel Units only) 6-50-000 9 Piston - -0 PSIG thru 7-40 PSIG Ranges only 67-5-000