ASTM COMMITTEE F02 FLEXIBLE BARRIER PACKAGING. Dhuanne Dodrill March 16, 2016
|
|
- Winifred Harrison
- 6 years ago
- Views:
Transcription
1 ASTM COMMITTEE F02 FLEXIBLE BARRIER PACKAGING Dhuanne Dodrill March 16, 2016
2 ASTM INTERNATIONAL ASTM International is a globally recognized leader in the development and delivery of international voluntary consensus standards. 30,000 Members 150 Countries 12,000 Standards 145 Technical Committees
3 ASTM INTERNATIONAL F02 Flexible Barrier Packaging (Primary Barrier Packaging) D10 Packaging (Transport & Distribution Packaging) D20 Plastics D20.19 Film, Sheeting, and Molded Products D20.95 Recycled Plastics 24 Packaging standards are FDA recognized consensus standards
4 7. Apparatus 7.1 Oxygen Gas Transmission Apparatus, as diagrammed in Fig. 1 with the following: F02.10 PERMEATION Chair: Mike Troedel F3136 Determine Oxygen Permeability using a Dynamic Accumulation Method (Fluorescent Decay) Oxygen sensor incorporates a fluorophore that fluoresces in response to light but is quenched in the presence of O 2. Standard was published in FIG. 1 A Practical Arrangement of Components for the Measurement of Oxygen Transmission Rate Using a Fiber Optic Oxygen Sensor
5 F02.10 PERMEATION Chair: Mike Troedel New Test Method for WVTR through Packages using a Modulated IR Sensor Extension of F1249 (sheets) Subcommittee Ballot conducted ILS will be the next step New Test Method for WVTR through Films Using an Electrolytic Detection Sensor Ideal for high barrier materials Subcommittee Ballot was conducted ILS in process
6 F02.15 CHEMICAL/SAFETY PROPERTIES Chair: Rick Clark F1608 Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method) Main Committee ballot underway Standard Equipment (nebulizer no longer available) Exposure chamber evacuation practice will be improved Titration methods will be improved
7 F02.15 CHEMICAL/SAFETY PROPERTIES Chair: Rick Clark F2638 Aerosol Filtration for Measuring the Performance of Porous Packaging as a Surrogate Microbial Barrier In the process of being updated for ballot Change direction of flow rates to low to high flow Define calibration procedure and material Addition of metal screen to prevent sample interference Pre-test method for determination of challenge concentration Use of precision accumulators Add range of acceptable particle sizes for use
8 F02.20 PHYSICAL PROPERTIES Chair: Marie Tkacik F2981 Verify Flexible Barrier Material Resistance to the Passage of Air (aka Impermeability test from ISO Annex C) Published in 2015 F1306 Slow Rate Penetration Resistance of Films and Laminates Precision and Bias statement updated Main Committee Ballot passed Expect update to be published soon
9 F02.20 PHYSICAL PROPERTIES Chair: Marie Tkacik F904 Bond Strength of Laminates Significant updates to the standard Main Committee Ballot just closed Want to conduct a new ILS planned for next year F2029 Making Heatseals Has been completely rewritten and now includes a practice for impulse seals Main Committee Ballot is underway
10 F02.40 INTEGRITY Chair: Philip Cooper F3039 Dye Penetration Nonporous Packaging Previously addressed detecting leaks (channels) in seals Method B was added to detect pinholes (through-holes) Method was refined to improve reproducibility of the method New ILS was completed assess limit of detectability (various holes sizes being used) 10µm hole Probability of Detection of µm hole Probability of Detection of µm hole Probability of Detection of µm hole and larger Probability of Detection of Updated method was recently published. F1929 Dye Penetration Porous Packaging Updated to clarify some wording Updated method recently published
11 F02.40 INTEGRITY Chair: Philip Cooper New 95 Test Method on Leak Detection by Vacuum 96 Deflection 97 ILS was conducted X XXXX 4.2 A vacuum is then applied to the test chamber and each pocket measured again. Sealed pockets can be identified as the measurement between the first and second profiles will change. This is known as deflection and is caused by the pressure difference between the air inside the 98 Main Committee Ballot underway 99 pocket and the air in the chamber caused by the application of vacuum.(figure 2) Figure The deflection of a pocket with a gross hole will be minimal as the pressure difference
12 F02.40 INTEGRITY Chair: Nick Winters New Test Method on O 2 Analysis via Head Space Sampling Method being revised based on feedback from Subcommittee ballot Seeing more variation with pouches that needs to be resolved before ILS New Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method has been developed, ILS completed, subcommittee ballot expected soon
13 F02.50 PACKAGE DESIGN & DEVELOPMENT Chair: Dan Burgess F2097 Guide for Design and Evaluation of Primary Flexible Packaging Medical Products Compendium of commonly used test methods and standards Organized into 8 categories Safety Visibility & Appearance Barrier Processing Durability Printed Ink Package Integrity & Seal Strength Package Performance Just balloted to add new standards
14 F02.50 PACKAGE DESIGN & DEVELOPMENT Chair: Dan Burgess F1980 Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices Additional guidance provided regarding humidity Ballot just closed AAF=Q -T )/10] 10 [(TAA RT
15 QUESTIONS? Dhuanne Dodrill Diane Trinsey
ASTM F e1 Standard Practice for Climatic Stressing of Packaging Systems for Single Parcel Delivery
ASTM F2825-10e1 Standard Practice for Climatic Stressing of Packaging Systems for Single Parcel Delivery Do we really need another conditioning standard? Hal Miller PACE Solutions, LLC hfmiller2@att.net
More informationTMElectronics, Inc. Specialists in Leak, Flow and Package Testers
Relevant ASTM and ISO Standards - How TME Testers Meet the Need Note from TME: Our package testers, the BT-1000, the BT Integra-Pack, and the TME Solution-C, all conform to certain of the ASTM International
More informationPACKAGE TESTING AND VALIDATION SERVICES
PACKAGE TESTING AND VALIDATION SERVICES A sterile medical device, which includes the packaging, must function as labeled for the shelf-life claimed for the device. The primary package must maintain its
More informationPACKAGE TESTING & VALIDATION IN THIS SECTION EXPERT SOLUTIONS FOR PRODUCT DEVELOPMENT
EXPERT SOLUTIONS FOR PRODUCT DEVELOPMENT PACKAGE TESTING & VALIDATION A sterile medical device, which includes the packaging, must function as labeled for the shelf-life claimed for the device. The primary
More informationPackaging for terminally sterilized medical devices. Part 1: Requirements for materials, sterile barrier systems and packaging systems
INTERNATIONAL STANDARD ISO 11607-1 First edition 2006-04-15 AMENDMENT 1 2014-07-15 medical devices Part 1: Requirements for materials, sterile barrier systems and packaging systems AMENDMENT 1 Emballages
More informationBemis Laboratory Services Your Reliable Test Partner
Bemis Laboratory Services Your Reliable Test Partner Contents 1. Transportation Testing / Distribution Testing to ASTM D4169 and ISTA Page 4 2. Packaging Integrity /Sample Testing 6 3. Age Testing 8 4.
More informationBemis Laboratory Services
Bemis Laboratory Services Kilbeggan Road, Clara, Co. Offaly Testing Laboratory Registration number: 263T is accredited by the Irish National Board (INAB) to undertake testing as detailed in the Schedule
More informationASTM E96 VS. F1249 WHICH PROVIDES MORE ACCURATE TEST RESULTS?
ASTM E96 VS. F1249 WHICH PROVIDES MORE ACCURATE TEST RESULTS? Modern barriers require more sensitive and accurate test methods. Does E96 stand up to the test? MOCON, Inc. May 16, 2017 Contents Abstract
More informationWHITE PAPER March 2015
WHITE PAPER March 215 Medical Packaging Study The Impact of Sterilization and Testing on the Microbial Barrier of Different Materials Author: Nicole Kaller, Packaging Engineer, DuPont Medical and Pharmaceutical
More informationTesting Water Vapor Transmission Rates for Flexible Barrier Materials Including Metalized Structures
Testing Water Vapor Transmission Rates for Flexible Barrier Materials Including Metalized Structures Robert Maixner Michelle Stevens MOCON Inc. ABSTRACT As new materials with increased barrier properties
More informationFlexAct BT (Bag Tester) Flexboy 2D November, 2015
FlexAct BT (Bag Tester) Flexboy 2D November, 2015 Agenda 1 2 3 4 Container Closure Integrity for SUS FlexAct BT Value Proposition FlexAct BT Instruments FlexAct BT SU Flexboy 2D 5 FlexAct BT Validation
More informationMedical and Pharmaceutical Packaging Styles
Aligned Test Methods and Sampling Plans for DuPont Tyvek Medical and Pharmaceutical Packaging Styles June 2017 Aligned Test Methods The Medical Packaging Transition Project (MPTP) includes manufacturing
More information10 Things You Should Do Before You Validate Your Next Package
sponsored by 10 Things You Should Do Before You Validate Your Next Package Before you set out to validate a medical device package design or process, you ve got to do your homework. You need to understand
More informationFEBRUARY 27, 2018 Single-Use Bag Permeability Testing in Cryopreservation Conditions
FEBRUARY 27, 2018 Single-Use Bag Permeability Testing in Cryopreservation Conditions Mike W. Johnson Market Development Engineering Manager Entegris, Inc. AGENDA 01 Single-use technology 01 Permeation
More informationBarix Multilayers: a Water and Oxygen Barrier for Flexible Organic Electronics. Robert Jan Visser
Barix Multilayers: a Water and Oxygen Barrier for Flexible Organic Electronics Robert Jan Visser Organic Electronics Is the Future of Electronics Organic? MIT Stanford UC Berkeley Nano Forum Vitex Systems,
More informationMeeting the challenges of medical device packaging
Meeting the challenges of medical device packaging Gisela Cristina Mendes Bastos Viegas, S.A. October 14, 2011 Agenda Evaluation and selection Validation Test methods Sterile Barrier Systems EN 868 Parts
More informationHeat Seal Coatings. Brian Ingraham Product Development Manager, Medical Amcor Flexibles
Heat Seal Coatings Love Them or Leave Them? Brian Ingraham Product Development Manager, Medical Amcor Flexibles Agenda Coated Products Chemistry and Processing Coating-Free Peelable Technology and Evolution
More informationContainer Closure Integrity Tests (CCIT) for Single-Use Systems
By Lionel Karcher, Head of Microbiology Laboratory, BU Confarma Container Closure Integrity Tests (CCIT) for Single-Use Systems Container Closure Integrity Tests have traditionally been performed using
More informationSterile Barrier System: Common Failure Modes & Design Recommendations
Sterile Barrier System: Common Failure Modes & Design Recommendations Kevin Fernandez Presenter Greg Schwinghammer Moderator Eric Lau Presenter March 2013 1 Agenda Packaging System Protective package Sterile
More informationStandard for handling, packing, shipping and use of moisture/reflow sensitive surface mount devices
This is a preview - click here to buy the full publication,(&3$6 Edition 1.0 2000-08 Standard for handling, packing, shipping and use of moisture/reflow sensitive surface mount devices 38%/,&/
More informationEuropean Packaging Regulations What to expect from a notified body audit of your packaging
What to expect from a notified body audit of your packaging Dr. Ralf Walther TÜV Süd Product Service GmbH March 3-5, 2009 www.healthpack.net Content 1. Short introduction of TÜV Süd Product Service 2.
More informationMedical Device Packaging Benchmarking Project
November Medical Device Packaging Initiated by Institute of Packaging Professionals International Safe Transit Association Sponsored by Dupont Administrated by Dennis Young and Associates, Inc. The Survey
More informationGLOBAL QUALITY SOLUTIONS PACKAGE INTEGRITY SEAL INTEGRITY LEAK DETECTION
GLOBAL QUALITY SOLUTIONS PACKAGE INTEGRITY SEAL INTEGRITY LEAK DETECTION Redefining the standards for accuracy and reliability. About PTI PTI Packaging Technologies & Inspection is headquartered in Tuckahoe,
More informationOverview of new SSL Standards under Development through the IES/TPC
Annual Meeting May 8 th, 2013 Overview of new SSL Standards under Development through the IES/TPC Cameron Miller NIST 1 Illumination Engineering Society Regional/District/Section Organizational Structure
More informationGeneral catalog. D. Gas permeability tester For battery membrane, rubber film, laminated flat film and kinds of polymer films Labthink model: BTY-B2P
General catalog 1. Gas Permeability Tester A, Manometric Gas Permeability Tester For tests of gas transmission rate, solubility coefficient, diffusion coefficient and permeability coefficient through plastic
More informationThermoforming packaging machine R 145 with MULTIVAC Clean Design. Maximum process reliability and cleanroom suitability
Thermoforming packaging machine R 145 with MULTIVAC Clean Design Maximum process reliability and cleanroom suitability MULTIVAC R 145 Clean Design Thermoforming packaging machine R 145 with MULTIVAC Clean
More informationPVDC New Developments, New Opportunities
PVDC New Developments, New Opportunities Kirk Paisley SolVin, a division of Solvay Advanced Polymers, L.L.C. Alpharetta, Georgia Introduction The information in this presentation will provide basic background
More informationSample Size Rationale For Medical Device Package Validation
Sample Size Rationale For Medical Device Package Validation Andrew Bevil Engineering Services Manager WESTPAK Steven Walfish President Statistical Outsourcing Services Dec 2017 Agenda Introduction / Definitions
More informationGuiding Principles for the implementation of fluid management technologies for modern single use aseptic processing
Guiding Principles for the implementation of fluid management technologies for modern single use aseptic processing Jean-Marc Cappia, Vice President Marketing Fluid Management Technologies Agenda 1. Aseptic
More informationPDA: A Global. Association. Proposed Revisions to USP <1207> STERILE PRODUCT -
Proposed Revisions to USP STERILE PRODUCT - PDA: A Global PACKAGE INTEGRITY EVALUATION Now in the Sep/Oct 2014 USP Pharmacopeial Forum For Public Comment Association Prepared by: Dana M. Guazzo
More informationAnecto Ltd. Ballybrit Business Park, Galway. Testing Laboratory Registration number: 175T
Anecto Ltd. Ballybrit Business Park, Galway Testing Laboratory Registration number: 175T is accredited by the Irish National Board (INAB) to undertake testing as detailed in the Schedule bearing the Registration
More informationEnhanced Water Vapour Permeability Tester for High Barrier Materials. Alyce Hartvigsen, PBI Dansensor A/S, Ringsted, Denmark
ON THE QUALITY LINE Enhanced Water Vapour Permeability Tester for High Barrier Materials Alyce Hartvigsen, PBI Dansensor A/S, Ringsted, Denmark 1 Agenda of Presentation Introduction Review of permeation
More informationBREAK WITH TRADITION LEAK DETECTION METHODS FOR PHARMACEUTICAL BLISTER PACKS. Philip Stevenson M.Eng (Hons), Product Manager, Sepha Ltd.
BREAK WITH TRADITION LEAK DETECTION METHODS FOR PHARMACEUTICAL BLISTER PACKS. Philip Stevenson M.Eng (Hons), Product Manager, Sepha Ltd. 01 Detecting leaks in blister packaging has traditionally involved
More informationSmart Vapor Retarders
CertainTeed Smart Vapor Retarders Insulation B UILDING S CIENCE SMART VAPOR RETARDERS: A TECHNOLOGY PRIMER For years, builders have relied on a dual climate-zone classification for the placement of vapor
More informationUltra High Barrier Coatings by PECVD
Society of Vacuum Coaters 2014 Technical Conference Presentation Ultra High Barrier Coatings by PECVD John Madocks & Phong Ngo, General Plasma Inc., 546 E. 25 th Street, Tucson, Arizona, USA Abstract Silicon
More informationISO Part 1 and Part 2 Compliance Requirements. Cathriona O Neill
ISO 11607 Part 1 and Part 2 Compliance Requirements Cathriona O Neill I.S. EN 11607 Introduction ISO 11607 is the principal guidance document. Packaging for terminally sterilised medical devices - Part
More information55 Gallon Bags TYPES OF BAGS. 55 gallon blue bag > high barrier. 55 gallon metalized bag > standard barrier. 55 gallon clear bag > standard barrier
Company Profile Aran Packaging was established in 1983 in Kibbutz Nachshon, Israel as a manufacturer of Bag in Box packaging. Aran offers a wide variety of bag in box containers for liquids available in
More informationSteam Sterilization Monitoring in the New CSA Standard (Z )
Speaker Disclaimer Steam Sterilization Monitoring in the New CSA Standard (Z314.3-14) Rick Bauer, Ph.D. Senior Technical Services Advisor 3M Canada Employed in technical services for 3M Canada Education,
More informationIMRE/ETPL Flagship Project
IMRE/ETPL Flagship Project Nanoparticulate Barrier Films & Gas Permeation Measurement Techniques for Thin Film Solar & Display Application Problems Senthil Ramadas Institute of Materials Research & Engineering
More informationAqueous Nanocomposite Barrier Coatings A more sustainable option for high barrier flexible packaging
Aqueous Nanocomposite Barrier Coatings A more sustainable option for high barrier flexible packaging Harris A. Goldberg; Carrie A. Feeney, and Michele Farrell InMat Inc. 216 Route 206 Suite 7 Hillsborough,
More informationFlorida Atlantic University, U.S.A, D = diffusion coefficient ( m / s ) eff
Correlation of Chloride Diffusivity and Electrical Resistivity for Cracked Concrete D.V. Reddy, Ph.D., P.E., P.Eng, C. Eng (U.K.) 1, Stanley W. Merantus, B.S., and Khaled Sobhan, Ph.D. 1 1 Florida Atlantic
More informationSECTION THROUGH-PENETRATION FIRESTOP SYSTEMS
SECTION 07841 - THROUGH-PENETRATION FIRESTOP SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationCDF Corporation. Worldwide innovator in flexible liquid packaging
CDF Corporation Worldwide innovator in flexible liquid packaging CDF Corporation CDF Corporation is an international company that specializes in the manufacture and sale of high quality liners and flexible
More informationTetra Pak Aseptic Package Integrity. Mike Bolstridge Director Product Quality and Safety IFTPS March 2012
Tetra Pak Aseptic Package Integrity Mike Bolstridge Director Product Quality and Safety IFTPS March 2012 Aseptic Packaging Definition: Hermetically sealed to prevent re-infection Tetra Brik Aseptic 1.
More informationFlexboy 2D Pre-designed Solutions for Storage Best Performance, Assurance of Supply and Closure Integrity for All Process Steps
Storage Best Performance, Assurance of Supply and Closure Integrity for All Process Steps 2 Flexboy 2D Pre-designed Solutions Table Please click on the headline to go to the selected topic Digital Selection
More informationHow to identify a high quality VIP
How to identify a high quality VIP - methods and techniques to guarantee high quality in production and application - Heisinger Straße 8 D-87437 Kempten Tel.: +49 (0) 831 / 57 53 60 Fax: +49 (0) 831 /
More informationMicophotometric Control of Particles and Inhomogeneities in Flowing Polymer Melts during Extrusion Processing
M.Stephan, S.Große: Micophotometric Control of Particles and Inhomogeneities in Flowing Polymer Melts during Extrusion Processing Workshop January, 28 th -29 th 2005, Dresden Particulate Heterogeneities
More informationHEAD. 5. Materials and preformed sterile barrier systems Microbial barrier properties...10
DUPONT TYVEK COMPLIANCE TO ISO 11607-1:2006 CONTENTS HEAD Introduction.... 3 ISO 11607-1:2006 Requirements.... 4 4. General requirements.... 4 4.2 Quality systems.... 4 4.3 Sampling.... 4 4.4 Test methods....
More informationStandard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry 1
Designation: D 418 99 Standard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry 1 This standard is issued under the fixed designation D 418; the number immediately
More informationStandard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials 1
Designation: D 4168 95 (Reapproved 00) Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials 1 This standard is issued under the fixed designation D 4168; the
More informationConfocal Microscopy of Electronic Devices. James Saczuk. Consumer Optical Electronics EE594 02/22/2000
Confocal Microscopy of Electronic Devices James Saczuk Consumer Optical Electronics EE594 02/22/2000 Introduction! Review of confocal principles! Why is CM used to examine electronics?! Several methods
More informationRoll-to-roll Technology for Transparent High Barrier Films
Roll-to-roll Technology for Transparent High Barrier Films Presented at the AIMCAL Fall Technical Conference, October 19-22, 2008, Myrtle Beach, SC, USA Nicolas Schiller, John Fahlteich, Matthias Fahland,
More information"Pulp and Paper Testing" Edited by Jan-Erik Levlin And Liva Sōderhjeln
Item Number: 0202FIN17 ISBN: 952-5216-17-9 287 pages Contents include: Single fibers and pulp testing Paper testing Uncertainty of testing Standardization Chapter 1 - Aim of pulp and paper testing 1 Why
More informationFundamentals of Package Engineering & Design
Fundamentals of Package Engineering & Design Presenters Moderator: Daphne Allen Editor Pharmaceutical & Medical Packaging News Karen Polkinghorne Packaging Engineer & MDM Specialist DuPont Medical & Pharmaceutical
More informationPPS Outshines Stainless Steel in Chemically-Hostile Valve Applications
PPS Outshines Stainless Steel in Chemically-Hostile Valve Applications What is PPS? Polyphenylene Sulfide (PPS), is a high performance, fiber reinforced, advanced composite, linear thermoplastic polymer.
More informationPHARMACEUTICAL PACKAGING
GLOBAL SOLUTIONS FOR PHARMACEUTICAL PACKAGING High Barrier Bags Filling Vacuum Gas Flushing Sealing PACKAGING SOLUTIONS UNLOCKING VALUE FOR YOUR CHEMICAL PRODUCTS BERNHARDT is specialized in the production
More informationFocus on: FEP. Fluoropolymers. FEP in the fluoropolymer family.
TECHNICAL WHITEPAPER ocus on: EP Introduction Continuing our series of looking at the members of the fluoropolymer family in detail, this month we focus on EP (fluoroethylene-propylene). EP is a copolymer
More informationIntroduction to BioPBS
Introduction to BioPBS Agenda PTTMCC company profile PBS, how it works Who are we? A joint venture of PTT and MCC #84 WORLD s LARGEST C O R P O R AT I O N F O RT U N E 500 #1 JAPAN S LARGEST C H E M I
More informationFlexible Vapor Control Solves Moisture Problems of Building Assemblies - Smart Retarder to Replace the Conventional PE-Film
Flexible Vapor Control Solves Moisture Problems of Building Assemblies - Smart Retarder to Replace the Conventional PE-Film HARTWIG M. KÜNZEL Fraunhofer-Institute of Building Physics (Director: Prof. Dr.-Ing.
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13994 Second edition 2005-10-15 Clothing for protection against liquid chemicals Determination of the resistance of protective clothing materials to penetration by liquids under
More information3M Contrast Enhancement Film
Technical Data November 2013 3M Contrast Enhancement Film CEF2804 CEF2806 CEF2807 CEF2808 CEF2810 Product Description s (CEF) are specialized optically clear adhesives offering superior clarity and excellent
More informationISO INTERNATIONAL STANDARD. Hydraulic fluid power On-line automatic particle-counting systems for liquids Methods of calibration and validation
INTERNATIONAL STANDARD ISO 11943 First edition 1999-08-01 Hydraulic fluid power On-line automatic particle-counting systems for liquids Methods of calibration and validation Transmissions hydrauliques
More informationISO/TC61 ISO/TC61 1. ISO/TC TC/SC TC61 SC1 SC2 SC4 SC5 SC6 SC9 SC10 SC11 SC12 SC13
ISO/TC61 1. ISO/TC61 2. 3. 1 ISO/TC61 SC P- 32 O- 39 TC/SC TC61 SC1 SC2 SC4 SC5 SC6 SC9 SC10 SC11 SC12 SC13 2 ISO/TC61 TC/SC 2013.1.24 2013.1.24 2012/4~2013/3 SC1 7 0 1 SC2 66 17 32 SC4 27 19 8 SC5 84
More informationRev. 1 May 2018 Terragene offers a range of effective and easy-to-handle products to control the washing, hygiene, disinfection and sterilization processes in medical diagnostic laboratories. Available
More informationArchitectural Testing, Inc. 849 Western Avenue North Saint Paul, Minnesota Dan Johnson, Director - Regional Operations
IAS Accreditation Number Company Name Address Contact Name Telephone (651) 636-3835 Effective Date of Scope August 12, 2016 Accreditation Standard ISO/IEC 17025:2005 Conformity Specifications TL-285 849
More informationRadiation of Biopolymers. Jaejoon Han
Radiation of Biopolymers Jaejoon Han INTRODUCTION Polymers are macromolecules composed of many small molecules added to each other to form linear, branched, or cross-linked structures. Synthetic origin
More informationLaboratory-Platen-Presses Types P/M
Laboratory-Platen-Presses Types P/M Laboratory machines for the processing of polymers Collin laboratory platen presses offer Uniform temperature distribution over the platen surface Maximum heating/cooling
More informationJune 1, 2010 PARTIES INTERESTED IN EVALUATION REPORTS ON REFLECTIVE FOIL INSULATION
June 1, 2010 TO: PARTIES INTERESTED IN EVALUATION REPORTS ON REFLECTIVE FOIL INSULATION SUBJECT: Proposed Revisions to the Acceptance Criteria for Reflective Foil Insulation, Subject AC02-0610-R1 (LS/RB)
More informationISO How to translate into action Sterile container systems
Elmar Heid, Aesculap ISO 11607, part 1 specifies the basic attributes required of materials and preformed systems intended for use in packaging systems for terminally sterilized medical devices. ISO 11607,
More informationHighly porous fibre foams - Potential end use applications
VTT TECHNICAL RESEARCH CENTRE OF FINLAND LTD Highly porous fibre foams - Potential end use applications COST Action FP1205 March 7-9 2017, Stockholm, Sweden Elina Pääkkönen, Tiina Pöhler, Petri Jetsu,
More informationISO INTERNATIONAL STANDARD. Glass in building Explosion-resistant security glazing Test and classification by shock-tube loading
INTERNATIONAL STANDARD ISO 16934 First edition 2007-07-01 Glass in building Explosion-resistant security glazing Test and classification by shock-tube loading Verre dans la construction Vitrages de sécurité
More informationThermal performance of buildings and materials Determination of specific airflow rate in buildings Tracer gas dilution method
INTERNATIONAL STANDARD ISO 12569 Third edition 2017-08 Thermal performance of buildings and materials Determination of specific airflow rate in buildings Tracer gas dilution method Performance thermique
More informationDiamond Grade Flexible Roll-Up Sheeting
Traffic Safety and Security Division Diamond Grade Flexible Roll-Up Sheeting Series RS60/64I Product Bulletin RS60/64I February 2016 Description 3M Diamond Grade Flexible Roll-Up Sheeting Series RS60 is
More informationCREATING TOMORROW S SOLUTIONS MOBILITY. e-novation FOR FUEL CELLS POWERED BY SILICONES
CREATING TOMORROW S SOLUTIONS MOBILITY e-novation FOR FUEL CELLS POWERED BY SILICONES PUTTING FUEL CELLS IN THE FAST LANE A fuel-cell vehicle (FCV) or fuel-cell electric vehicle (FCEV) is an electric vehicle
More informationNew Approach to High Barrier Pharma Blister Forming Web. Georgia Mohr, Marketing Director Bemis Healthcare Packaging
New Approach to High Barrier Pharma Blister Forming Web Georgia Mohr, Marketing Director Bemis Healthcare Packaging Today s Review Pharma Blister Packaging Background PVC Barrier Blister Forming Webs Typical
More informationAccelerated Weatherability Testing The Right Choice
Accelerated Weatherability Testing The Right Choice Presented by: Stephen Novak CRRC Membership Meeting February 13, 2006 Topics Weathering Testers: Simulating the Forces of Destruction Developing Accelerated
More informationMANUFACTURING PROCESSES PREPREGS
PREPREGS Prepregging The reinforcement (carbon, fiberglass or aramid fiber or cloth) is saturated by dipping through the liquid resin. In an alternate method called a Hot Melt Process the resin is impregnated
More informationAmerican Society of Agricultural and Biological Engineers
ANSI/ASAE S401.2 FEB1993 (R2012) Guidelines for Use of Thermal Insulation in Agricultural Buildings American Society of Agricultural and Biological Engineers ASABE is a professional and technical organization,
More informationChilled Water. Product performance for insulation of chilled water piping
Chilled Water Product performance for insulation of chilled water piping ABOUT K-FLEX USA K-FLEX USA IS A LEADING MANUFACTURER of flexible, closed cell elastomeric insulation for mechanical piping, air
More informationFpollutant-free zero air for analytical
Ambient Air Quality Monitoring System AQMS-100 Zero Air Generator PI AQMS-100 provides ultra pure Fpollutant-free zero air for analytical purpose. Remote monitoring and configuration can also be achieved
More informationSECTION JOINT SEALANTS PART 1 - GENERAL 1.01 RELATED DOCUMENTS
SECTION 07-9200 - JOINT SEALANTS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More information1 Introduction. 2 Basic Technology
Innovative Clear Barrier Technology for the Packaging Industry Nicolas Schiller 1, Steffen Straach, Steffen Günther Fraunhofer FEP, Germany Alexandra L. Quiceno G., Antonio García Contreras BIOFILM, Columbia
More informationNONDESTRUCTIVE EVALUATION: POSITIVE CONTRIBUTIONS TO SAFETY, RELIABILITY, AND ECONOMICS
NONDESTRUCTIVE EVALUATION: POSITIVE CONTRIBUTIONS TO SAFETY, RELIABILITY, AND ECONOMICS Lisa Brasche, Associate Director lbrasche@iastate.edu Center for Nondestructive Evaluation Iowa State University
More informationCommon Causes of Blister and Bubble Formation in Industrial Coatings
Cases from the F-Files Mechanisms of Failure Common Causes of Blister and Bubble Formation in Industrial Coatings By James D. Machen, PCS, KTA-Tator, Inc. Rich Burgess, KTA-Tator, Inc., Series Editor Blistering
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 22196 Second edition 2011-08-01 Measurement of antibacterial activity on plastics and other non-porous surfaces Mesurage de l'action antibactérienne sur les surfaces en plastique
More information"ITO Film Trend for Touch Panel Applications"
AIMCAL Web Coating Conference 2011 October 23-26 Reno, Nevada USA 1 "ITO Film Trend for Touch Panel Applications" Teijin Chemicals Ltd. Haruhiko Itoh 2 Content 1. Structure and Features of TCF 2. Touch
More informationOpti-Check Handheld Fluorometer
Opti-Check Handheld Fluorometer November 11, 2011 P/N: 998-0861 Revision A TURNER DESIGNS 1995 N. 1 st Street San Jose, CA 95112 Phone: (408) 749-0994 FAX: (408) 749-0998 Table of Contents 1. Introduction
More informationMethods for Analyzing the Structure of Creases in Heat Sealed Paperboard Packages
Journal of Applied Packaging Research Volume 7 Number 1 Article 5 2015 Methods for Analyzing the Structure of Creases in Heat Sealed Paperboard Packages Ville Leminen Lappeenranta University of Technology,
More informationBIO-CEL -Modules. The Solution for state-of-the-art MBR-Technology. Backwashable - Self-Healing - Mechanically Cleanable
BIO-CEL -Modules The Solution for state-of-the-art MBR-Technology Backwashable - Self-Healing - Mechanically Cleanable 1 Fine bubble crossflow aeration 2 Activated sludge 3 Filtrate flow inside laminate
More informationShur-Shot X-Proof Hydrogen Fluoride Alarm Operations Manual
Shur-Shot X-Proof Hydrogen Fluoride Alarm Operations Manual P/N 1000006053 Rev E $7%$QDO\WLFV// //& 733 Dairy Rd. Parkton, Md. 21120 www.atbanalytics.com (410) 733-6365 Table of Contents Chapter 1: Getting
More informationIncorporating Insulating Sheathing into the Design of the Thermal and Moisture Management System of the Building Enclosure
Incorporating Insulating Sheathing into the Design of the Thermal and Moisture Management System of the Building Enclosure Peter Baker, Building Science Corporation ABSTRACT With rising utility cost, concerns
More informationLaser Welding of Engineering Plastics
Laser Welding of Engineering Plastics Technical Information Further information on individual products: www.ultramid.de www.ultradur-lux.basf.com www.ultrason.de www.plasticsportal.eu/ultraform 2 LASER
More informationOmron meets Pharma Milan, January 29 th Container Closure Integrity Testing (CCIT): a Risk Management Application
Omron meets Pharma Milan, January 29 th 2014 Container Closure Integrity Testing (CCIT): a Risk Management Application Marco Silvestri Andrea Simonetti Process: Container Closure Integrity Testing for
More informationNanofibrillated Cellulose Fibers:
Nanofibrillated Cellulose Fibers: Where Size Matters in Opening New Markets to Nanofiber Usage Presentation to 2008 TAPPI Nanotechnology Conference June 25-27, 27, 2008 St Louis, MO By E.C. Homonoff, R.E.
More informationISPE Nordic, Denmark Yves Scholler SKAN AG
Risk of contamination through pinholes in gloves and how to prove the integrity ISPE Nordic, Denmark Yves Scholler SKAN AG 07.10.2015 1 Agenda 1 Regulatory Requirements 2 Overview of Different Testing
More information-<1 ABD0S ' Pipette Tips. Trusted Partner in Life Sciences Plastic Laboratory Products.
-
More informationOptimizing the Assembly Process with Cure-On-Demand UV/Visible Light-Curable Adhesives
Optimizing the Assembly Process with Cure-On-Demand UV/Visible Light-Curable Adhesives Virginia P. Read Industrial Market Segment Manager DYMAX Corporation Torrington, CT www.dymax.com Introduction Manufacturers
More informationsterility assurance Prove the power and your processes
sterility assurance Prove the power and efficacy of your processes sterility assurance programs: an introduction YOUR CHALLENGES Contamination events cost a lot of time and money. Sterility problems can
More informationJuly 23, 2010 PARTIES INTERESTED IN REFLECTIVE FOIL INSULATION
July 23, 2010 TO: SUBJECT: PARTIES INTERESTED IN REFLECTIVE FOIL INSULATION Revisions to the Acceptance Criteria for Reflective Foil Insulation, Subject AC02-0610-R1 (LS/RB) Dear Madam or Sir: In June
More information