INTEGRASPEC. Specify Integrity in your next project: Please visit us at "The User Friendly ICF" PRODUCT LINE.

Transcription

1

2

3 INTEGRASPEC "The User Friendly ICF" Commercial 90 o Corners 90 o Corners Headers Santa Fe Bucks IntegraBucks Inserts/ Furring Strips Standard Panels 45 o Corners Brickledge PRODUCT LINE H Clips Taper Panels Webs/Spacers Specify Integrity in your next project: Please visit us at

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23 INTEGRASPEC INSULATED CONCRETE FORMS / BUILDING SYSTEM. ( 5 (14), 6 (15), 8 (20), 10 (25), 12 (30) INCH (CM) CONCRETE CAVITY/CORE SIZE (WIDER CORE SIZE AVAILABLE, REFER TO "W" ON TABLE P1T ) (8 IN (20 CM) SHOWN) ONE OR TWO ROWS OF HORIZONTAL AND VERTICAL REINFORCING STEEL AS REQUIRED AND / OR AS SPECIFIED BY LOCAL ENGINEERS. P = PROJECTION (SEE TABLE P1T) (16 5/8 IN (42.23 CM) SHOWN) TYPICAL CORNER COLUMN WITH STIRRUPS & VERTICAL REINFORCING STEEL AS SPECIFIED BY LOCAL CODE / ENGINEER. P = PROJECTION (SEE TABLE P1T) (16 5/8 IN (42.23 CM) SHOWN) INTEGRA "H" CLIP, JOINS TWO OR MORE SPACERS OF 4", 5", 6", 8", 10" OR 12" (10, 13, 15, 20, 25 OR 30 CM) INTEGRASPEC SPACERS WITH 1 5/8" FURRING / STRAPPING LOCATED AT 8" (20CM) CENTERS; FINISHING MATERIAL, I.E. DRYWALL FASTENED TO INTEGRASPEC FURRING / STRAPPING WITH COARSE THREADED SCREWS AS SPECIFIED BY LOCAL BUILDING CODE.

24 ONE OR TWO ROWS OF HORIZONTAL AND VERTICAL REINFORCING STEEL AS REQUIRED AND / OR AS SPECIFIED BY LOCAL ENGINEERS. TYPICAL COLUMN WITH STIRRUPS & VERTICAL REINFORCING STEEL AS SPECIFIED BY LOCAL ENGINEER. W = WIDTH (SEE TABLE P1T) (16 5/8 IN (42.23 CM) SHOWN) INTEGRA "H" CLIP, JOINS TWO OR MORE SPACERS OF 4", 5", 6", 8", 10" OR 12" (10, 13, 15, 20, 25 OR 30 CM) P = PROJECTION (SEE TABLE P1T) (16 5/8 IN (42.23 CM) SHOWN) INTEGRASPEC INSULATED CONCRETE FORMS / BUILDING SYSTEM. ( 5 (14), 6 (15), 8 (20), 10 (25), 12 (30) INCH (CM) CONCRETE CAVITY/CORE SIZE (WIDER CORE SIZE AVAILABLE, REFER TO "W" ON TABLE P1T ) (8 IN (20 CM) SHOWN) INTEGRASPEC SPACERS WITH 1 5/8" FURRING / STRAPPING LOCATED AT 8" (20CM) CENTERS; FINISHING MATERIAL, I.E. DRYWALL FASTENED TO INTEGRASPEC FURRING / STRAPPING WITH COARSE THREADED SCREWS AS SPECIFIED BY LOCAL BUILDING CODE.

25 COLUMN OR WALL SIZES - TABLE P1T 4", 5", 6", 8", 10" & 12" 8 5/8" (22 CM)** 9 5/8" (25 CM)** 10 5/8" (27 CM)** 11 5/8" (30 CM)** 12 5/8" (32 CM)** 13 5/8" (35 CM)** 14 5/8" (37 CM)** 15 5/8" (40 CM)** 16 5/8" (42 CM)** 17 5/8" (45 CM)** 18 5/8" (47 CM)** 22 5/8" (57 CM)** 24 5/8" (63 CM)** 25 1/4" (64 CM)*** 27 1/4" (69 CM)*** 29 1/4"(74 CM)*** 31 1/4" (79 CM)*** 33 1/4" (84 CM)*** 35 1/4" (90 CM)*** 37 3/8" (95 CM)**** 39 3/8" (100 CM)**** 41 3/8" (105 CM)**** 43 3/8" (110 CM)**** 45 3/8" (115 CM)**** 47 3/8" (120 CM)**** 49 3/8" (125 CM)**** 4 5/8" (12 CM)** 5 5/8" (14 CM)** 6 5/8" (17 CM)** 8 5/8" (22 CM)** 10 5/8" (27 CM)** 12 5/8" (32 CM)** 13 5/8" (35 CM)** 15 5/8" (40 CM)** 16 5/8" (42 CM)** 17 5/8" (45 CM)** 29 5/8" (52 CM)** 22 5/8" (57 CM)** 24 5/8" (63 CM)**

26

27

28

29

30 INTEGRASPEC "The User Friendly ICF" IntegraPilasters Specify Integrity in your next project: Please visit us at

31

32

33

34

35

36

37

38 IntegraSpec ICF is pleased to announce the launch of their fully insulated window and door bucks. The IntegraBuck provides the homeowner with a fully insulated window and/or door opening reducing the chance of air leaks and providing the same insulation factor as the rest of the wall system. The IntegraBuck also provides a single substrate to contractors installing Stucco, decreasing risk of movement. The IntegraBuck is made of the exact same material as our IntegraSpec ICF wall system using type II EPS and also includes the 1 ⅝" high-impact polystyrene fastening strip recessed approximately ⅝" below the surface. The fastening strip is easily identified by the IntegraSpec stamp embossed on the surface of the EPS. The fastening strips have been tested to provide greater fastening ability than dimensional lumber and have been offset in the buck to provide the contractor two fastening surfaces when installed either up or down since they are also reversible. The IntegraBuck is available in 4", 6", and 8" widths by 12.25" high to match the height of our wall system panels. Extensive time and money can be saved when using the IntegraBuck since there is no need to buy, cut, form, and strap traditional wood or plastic bucks. IntegraBucks are easily installed by simply sliding the buck into the dove tailed grooves of any IntegraSpec ICF wall panel.

39

40

41

42

43 INTEGRASPEC "The User Friendly ICF" IntegraBucks / IntegraHeaders TEMPORARY HEADER BRACE IF OVERSPAN, PLACE SPACER / WEB IN RSO AND REMOVE AFTER CONCRETE PLACEMENT Specify Integrity in your next project: Please visit us at

44

45

46

47

48

49

50

51

52

53 INTEGRASPEC "The User Friendly ICF" Discover the IntegraSpec Difference! Secure opening sides with unique Dovetail Grooves Faster installation Simply slide bucks into place while assembling the walls eliminating any additional forming material. Less cost Eliminates costly and inefficient wood or plastic and reduces waste. Better energy performance Completes monolithic envelope of wallsystem and assists insulated thermal mass. Greater design flexibility Better suited to stucco finishes, creates more light with smaller window sizes and provides nailing strips. New 90 o IntegraBuck 30 o SantaFe Buck Specify Integrity in your next project

54

55

56 The IntegraBuck part of the IntegraSpec ICF Wall System A fast, easy, economical way to frame out ICF openings for windows and doors. complete with a built in stud for window fastening Totally eliminates air infiltration and thermal transfer by completing the building envelope with the same EPS material used in the IntegraSpec ICF wall system. The concrete core face dovetail groove design allows the IntegraBuck to easily slide into the wall cavity creating a perfect concrete dam.

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78 INTEGRASPEC "The User Friendly ICF" FEATURE PROJECT Project: Vista Cielo Macomber House Architect: Juergen Zierler Engineer: George Eastom ICF Installer: ICF Buddies IntegraSpec Distributor: IntegraSpec San Diego Ramona, California Vista, California Fallbrook, California Ramona, California Poway, California Features: 3610 ft 2 (plus 1100 ft 2 for the ICF garage) sustainable, passive solar, two coat stucco applied directly on IntegraSpec, 6" concrete core thickness, with 10 mm horizontal and 15 mm vertical grid steel. IntegraBuck technology was used for all door and window openings, and for the reinforced columns. Benefits: Fire proof house as previous home was destroyed by wildfire near a major seismic fault (Rose Canyon) and is Earthquake Resistant, Energy Efficient, Safe, and Quiet. IntegraSpec s independent panel design enabled the fast construction of the complex steel engineering specifications. Betsy is a Real Estate Professional and I am a Professional Engineer. We undertook extensive research into the construction components and systems for our new home. We wanted to be our own General Contractors and participate as much as possible in the design and construction of our home. We wanted a sustainable envelope and spent hundreds of hours researching ICFs. We travelled to the World of Concrete in Las Vegas, and spent four days on the Trade Show floor. IntegraSpec s Design eliminated form float, form compaction, and form waste. IntegraSpec performed as advertized and gave us the sustainable platform we searched for. - CPT. Bob Macomber, PEng Specify Integrity in your next project: Please visit us at

79 Thank you