VARCO PRUDEN BUILDINGS BUILDING SOLUTIONS... ONE RELATIONSHIP AT A TIME.

Transcription

1 VARCO PRUDEN BUILDINGS BUILDING SOLUTIONS... ONE RELATIONSHIP AT A TIME.

2 SUSTAINABLE DESIGN Varco Pruden Provides Building Solutions... one relationship at a time. Our Commitment to Relationships Varco Pruden specializes in providing architects, engineers and building owners with cost-effective solutions to meet their project requirements for both design and function. With six strategically located service centers and multiple production resources, VP is a market leader in the building systems industry throughout the United States and Canada. Using advanced design and engineering tools such as VP Command, our proprietary design and estimating software, building decision makers can rely on VP and the VP Builders to provide a complete building solution on time and within budget. Meeting Energy Efficiency Goals With the growing focus on the environmental impact a building has on its surroundings and occupants, both initially AND over the life cycle of the building, Varco Pruden s superior design strategies optimize steel design to reduce waste and cost. Further, sustainable design and construction practices in the building systems industry notably reduce, and in some cases eliminate certain perceived negative impacts a building may have on the environment and occupants. While VP provides part of the overall solution for a project seeking to become LEED certified, the areas where VP provides the most direct impact are: Recycled Content Recyclability / Reuse in the future Energy Efficiency Cool Roof materials Daylighting solutions Saving Energy With Innovative Products and Systems Varco Pruden uses recycled materials and all structural elements can be recycled in the future 2 VP uses advanced engineering and design strategies to optimize material usage to minimize waste in construction 3 VP s roof panels are available in Cool Roof colors for both low slope and high slope applications 4 Optimize energy efficiency with VP s innovative insulation systems. ThermaLift for SSR allows for more insulation installed above the structural secondary. ThermoDeck can be used with a variety of roof solutions. 5 Using daylighting solutions, such as VP s PrisMAX SL, Tuf lites or Wallites, can enhance your building s energy efficiency and improve interior lighting 6 Roof slopes, gutters and downspouts promote water efficiency by directing water run-off 2

3 INNOVATIVE SOLUTIONS /VPB BUYLINE 3500 Conventional or Custom-Engineered Steel Structures Varco Pruden offers designers unlimited options using conventional steel members including beams, bar joist, tubes and pipes. Building applications include multi-story buildings, heavy-loaded industrial facilities or special shapes for architectural features. VP s structural design team uses the latest modeling software along with VP Command to design and engineer facilities that meet the highest industry standards for safety and performance. VP s design team, working with experienced contractors and architects, will deliver buildings that are affordable, efficient and erectable. Save time and money with a single-source strategy. Starting with the end in mind, VP s complete service includes efficient engineering designs, accurate estimates, quality materials all backed by industry leading warranties. Owners can move into their new facility knowing they have a building that will meet their needs now and for years to come. A Builder to Meet Your Construction Needs Varco Pruden products are available through our network of authorized General Contractors and building systems specialists. Varco Pruden has a network of authorized builders throughout the US and Canada. The Varco Pruden Builder in your area can work with you to provide a variety of resources to ensure that your building will meet your project needs, as well as your schedule and budget. VP Builder services include assistance with site planning and structural design. Owners can also rely on their VP Builder for material options and recommendations along with accurate and complete project estimates. Whether you are planning a completely new building or upgrading and expanding an existing facility, your VP Builder is ready to help. Varco Pruden also has an international presence with VP Builders and licensee affiliates around the world. For more information about Varco Pruden and our network of independent authorized builders, visit us online at 3

4 LOW RISE CONSTRUCTION FOR A VARIETY OF APPLICATIONS Solid Web Framing Solutions VP frames are custom-designed for your project. All frames can be specified to support load and code requirements as well as for use with non-load-bearing conventional walls glass, brick, tilt-up, block, etc. Continuous Beam and Con tinuous Truss frames are recommended for use with load-bearing block or tilt-up walls and where interior columns are acceptible. Rigid Frame Open Web & Continuous Beam RIGID FRAME The VP Rigid Frame is the ideal system when economical, column-free interior space is desired. Clear spans up to 300' or more are available. On-Center, Off- Center Ridges and Single-Slope designs are available. All these economical clear-span structures permit unsurpassed flexibility in interior space utilization. Open Web Framing Solutions CONTINUOUS BEAM Where interior support columns are acceptable, as in vast production or storage areas, VP s Continuous Beam provides the greatest space at the lowest cost per square foot, with total flexibility in locating interior columns. Any width or eave height can be achieved. Interior column spaces can reach 100' or more. Rigid Frame RIGID TRUSS If your building plans call for unobstructed, columnfree interior space, VP s open web Rigid Truss frame offers long clear spans along with the advantages of open web rafters. The open web design of the Rigid Truss frames holds down construction costs through optimal material use and reduction of required building heights. Ductwork, wiring, sprinkler systems and lighting can be incorporated through the trusses. Rigid Truss frames can be designed with tapered or straight columns. Roof pitch can be as low as ¼:12. CONTINUOUS TRUSS The open web design of VP s Continuous Truss frames can hold down construction costs through optimal material use and reduction of required building heights. HVAC ducts, wiring and sprinkler systems can be installed within the web of the trusses to maximize clearance beneath the rafter. The open web design also provides for enhanced lighting dispersal for better interior visibility. Continuous Truss frames can also be used with other framing systems including block, tilt-up, ordinary steel framing or even wood. Continuous Beam Continuous Truss with Transbay HYBRID & CONVENTIONAL Construction projects are evaluated on an individual basis to determine the most efficient structural solution. Hybrid projects, where a blend of engineered structures is utilized, are defined by their need for a tall structure, long span capabilities, and specific heavy design load requirements. Conventional framing solutions are now a part of Varco Pruden s manufacturing capabilities. If your project demands heavy loads, crane supported frames, strict clearances beneath frames, extraordinary roof heights or a multi-story building, Varco Pruden s team provides a complete and competitive solution. 4

5 INNOVATIVE SOLUTIONS /VPB BUYLINE 3500 Alternative Primary Framing Solutions Through research and development, VP has expanded the capabilities of our systems to provide costeffective solutions for all types of low-rise construction, including the ability to use EPDM roofing systems, concrete walls or heavy design load as part of a VP Building. Deck-Frame Exterior DECK-FRAME Deck-Frame is the first steel building support solution specifically designed for membrane roof applications. Deck-Frame combines the efficiency, speed and economy of steel systems construction with the aesthetic performance of a membrane roof system. Secondary Framing Solutions HARD WALL SYSTEM VP Buildings works with designers and engineers to provide cost-efficient hard wall solutions that combine the benefits of VP s framing and roofing systems with hard wall applications. VP can accommodate either load-bearing and non load-bearing wall conditions and with VP s continuous beam structural framing, interior support spacing can meet a variety of floor plans. Deck-Frame Interior WIDEBAY TRUSSED PURLIN Less weight. Less cost. Less Restrictions. Designers for today s open-space buildings have a new option for bays requiring clear spans of up to 60 wide between frame lines. VP s WideBay Trussed Purlin System will outperform traditional bar joist on most applications. Requiring no field welding, WideBay purlins are engineered and manufactured to deliver more structural support with less total weight. Available in depths of 30, 34 and 40, these sturdy support structures are spaced 5 on center and can handle dynamic loads. And in spite of their brawn, these purlins look great with a standard G-30 finish. CEE & ZEE SHAPED GIRTS & PURLINS VP s standard secondary structural members include Zee shaped purlins for roof support and Cee shaped girts for wall support. These factory-formed members come in sizes of 7, 8½, 10 and 11½ and a full range of gauges. These structural members are protected with G-30 galvanized coating and clear acrylic finish for protection against rusting and weather during transport and erection. VP also offers factory applied primers to protect your structure during transport and erection. VP s standard primer is gray. Bronze and red oxide primer options are available for a small upcharge. Hybrid Frame System TRANSBAY BAR JOIST SYSTEM Perfect with bay spacing up to 40 VP s Transbay Bar Joist System can be used with all VP framing systems. It allows ample bay spacing and is particularly appropriate in facilities with bay spacing up to 40. WideBay Trussed Purlin 60 WideBay vs 40 Transbay could mean less frame sets over the same length of your building Hybrid Frame with Crane 5

6 ROOF SYSTEMS KXL TM Finish Wall & Roof Panel Colors Varco Pruden uses high-quality paint systems designed to provide long-term performance and protection. Each coating is formulated with thoroughly researched, tested and field-proven pretreatments, primers, resins and pigments that can meet your design and performance requirements. Our KXL finish on Hot Dipped Galvanized & Galvalume combines ceramic pigmentation with polyvinylidene fluoride for superior, long-lasting performance. PVDF finishes are respected for their durability, resistance and color retention. 70% PVDF finishes meet both Kynar 500 and Hylar 5000 specifications. Nonstocked colors may require minimum quantity order plus additional material procurement lead-time. Custom and special order colors are available upon request, require minimum quantity order plus pricing adjustments as needed. Some restrictions apply. Colors designated as cool have a value for Solar Spectrum Reflectance and Emissivity. These values are listed on the back of the corresponding color sample cards along with ASTM testing data. Consult your local governing agency for individual project requirements. SLR II panels are available in all standard colors plus Cool Jade Green, Cool Bright Red, Cool Parchment, Cool Old Town Gray, Cool Copper Penny, Cool Metallic Silver and Cool Weathered Copper. Cool Ebony is only available for trim. ThermalClad Architectural, Reveal and Shallow Plank Panels are available in all colors shown except Ebony and Clear-Coated Galvalume. ThermalClad Tuff Wall colors are shown. Custom colors are not available for Tuff Wall panels. VP Buildings reserves the right to change color offerings without notice. Metal sample chips are available upon request from VP Buildings. KYNAR 500 is a registered trademark of Atofina Chemicals, Inc. HYLAR 5000 is a registered trademark of Solvay Solexis, Inc. Galvalume is a registered trademark of B.I.E.C. International, Inc. Cool Leaf Green & Zinc Gray Cool Cotton White Cool Arctic White Cool Egyptian White AVAILABILITY 1 Roof Panels Only 2 SLR II Roof & Thermal Clad Wall 3 Non-stocked color Cool Imperial Blue Cool Straw Gold Cool Sierra Tan Clear-coated Galvalume 1 Cool Sierra Tan Panel Rib Wall Cool Cobalt Blue Cool Colonial Red Cool Hemlock Green Cool Granite Gray Cool Jade Green 2 3 Cool Leaf Green Cool Bermuda Green Cool Zinc Gray 3 Cool Colonial Red Cool Dark Bronze Cool Weathered Copper 2 Cool Parchment 2 Cool Old Town Gray 2 3 Cool Bright Red 2 Cool Metallic Silver 2 3 Cool Copper Penny 2 3 Cool Ebony Copper Penny SLR II Tuff Wall Stucco White Tuff Wall Light Stone Tuff Wall Medium Beige Tuff Wall Light Gray 6

7 ROOF SYSTEMS /VPB BUYLINE 3500 Steel Roof Systems Varco Pruden s top-of-the-line SSR standing seam roof, with millions of square feet in place is the benchmark in roofing value. The value starts with an unmatched useful life backed by weathertightness warranties. SSR is comprised of factory-formed panels which are interlocked and machine seamed in place, yielding a single unit membrane. SSR s unique design effectively accommodates thermal expansion and contraction caused by temperature changes. VP s patented SSR ridge system provides a complete seal at the apex of your building. SLRII is an architectural, high-slope roof system with a wider variety of cool color finishes. Panel Rib is an economical roof system with 36 coverage and attached with fasteners instead of a clip system. SSR Low slope, low maintenance 24 coverage Lengths up to 52 Available in a variety of standard colors and clear-coated Galvalume TM Weathertight seams over clip system Field-seamed, weather-resistant joint Roof slopes as low as ¼ in 12 U.S. Army Corps of Engineers approved for wind uplift resistance Four standard clips, available in four heights: 3½, 4, 4½, and 5 tall, allow for varying insulation thickness combinations up to 9½ inches. Panels meet UL 60, 90, 120 and FM Class 1 ratings, ESR-2527 & Florida approvals The SSR system is a low-slope, clip-mounted roof that meets the most demanding performance specifications. Panels are available in either 24 or 22 gauge zinc aluminum coated steel with 3 -high ribs. These durable, low-maintenance panels are interlocked and mechanically field-seamed in place. This yields a single membrane allowing for quick construction and strength at a lower cost. Clips are designed to allow thermal movement. SSR s ridge system seams together and provides a true expansion joint. SEAMED ROOF RIDGE FOR SSR The perfect way to cap off a Varco Pruden SSR roof. This unique design allows for a consistent look and efficient closure and protection at the apex of the roof. The VP Seamed Roof Ridge is available in either standard 24 gauge or optional 22 gauge zinc aluminum coated steel. Ridge caps can be painted or powder-coated to match VP standard roof colors. A patented seamer tool seams the ridge to a weathertight 360 seal. SLR II Meets architectural specifications 16 Coverage with 2 depth Lengths up to 50 Available in a wide selection of colors and clear-coated Galvalume TM Weathertight seams over clip system Roof slopes as low as ¼ in 12 UL 90 wind uplift rating available U.S. Army Corps of Engineers approved for wind uplift resistance Field-seamed weather-resistant joint Factory Mutual approved This Architectural/Structural Roof System is a highslope, concealed-fastener roof that meets most architectural performance specifications. Using factory-installed sealant, pre-caulked galvanized clips and field-seaming, this roof system provides unsurpassed performance and leak resistance. Panels are available in 22 or 24 gauge Galvalume steel. The thermally responsive Galvalume panel clip features a 20 gauge clip. PANEL RIB ROOF Attractive and economical 36 coverage Lengths up to 43 Available in a variety of standard colors and clear-coated Galvalume TM Color matched fasteners Roof slopes as low as ½ on 12 UL 60 and UL 90 wind uplift ratings available Miami-Dade County product approval Panel Rib is an attractive, high-quality, lowmaintenance roof for tight budgets. The panel is 36 wide and is attached with self-drilling, color-matched fasteners. This system offers you enhanced roof integrity and quicker installation. Sealant is applied to every metal-to-metal contact point, resulting in a weather-resistant roof. The panel has 1¼ -high ribs and comes in lengths up to 43. Panels are available in either 24 or 26 gauge zinc aluminum coated steel. A ten-year weathertight warranty is available in limited applications. SSR low slope SSR high slope SLR II SSR II Panel Rib Roof 7

8 ALTERNATIVE WALL & ROOF SYSTEMS Varco Pruden Retrofit and Re-roof Solutions Before & After Whether your building is pre-engineered or conventional construction, VP Roof Systems has a solution to stop roof leaks, reduce maintenance costs and improve the appearance of your facility. Regardless if your current roof is a non-metal or a metal roof... flat or sloped, Varco Pruden Roof Systems gives you: A roof system designed to meet the highest industry standards for quality and performance The option of adding slope to flat roofs, eliminating ponding and problems related to standing water Increased energy-efficiency with additional insulation and cool paint formulations Long-term, weathertight protection and fewer roofing headaches Retrofit SSR over ribbed roof Slope Build-Up over membrane Slope Build-Up with insulation Re-sloping METAL OVER METAL RETROFIT ROOF Compatible with a variety of VP roof panels As much as 11 vertical space allows adding insulation to achieve up to R-38 performance Available in cool rated panel colors Installation does not require existing roof tearoff resulting in faster installation and minimum disruption of business UL and FM ratings available Seamed roof systems (SSR, SLR II) may utilize either hat channels or zees. Panel Rib roof system must use zees as substrate. VP s retrofit solutions provide a method to replace and upgrade an existing metal roof in less time, at lower costs and without disrupting ongoing operations inside the building. With unparalleled longevity, low maintenance requirements, and low in-place life-cycle costs, VP s retrofit systems are a clear choice to solve existing roof problems. Your new roof is backed by weathertightness warranties for up to 25 years. High-Profile systems are versatile because they can be used with any VP roof panel. Use SSR Standing Seam Roof for an almost flat roofs with a minimum slope of ¼:12. Use VP s SLR II panel system for higher slope applications, where architectural appearance is critical. When using VP s Panel Rib roof, the minimum slope is ½:12. SLOPE BUILD UP RETROFIT ROOF Eliminate roof leaks and ponding Added slope to existing roof promotes positive drainage and eliminates ponding Architectural roof sheeting improves building appearance Weathertight seams eliminate leaks Adding insulation improves energy efficiency VP Roof Systems slope build-up re-roof solution eliminates roof leaks, reduces maintenance costs and improves energy efficiency. Whether you need to cover asphalt shingles or build up a valley gutter to re-direct drainage, VP s slope build-up system is engineered to solve existing roof challenges. Before After RE-SLOPING FOR WATER MANAGEMENT Eliminate interior valley conditions Added slope to existing roof eliminates interior valley conditions and improves drainage Achieve a more attractive roof line Weathertight seamed SSR eliminates leaks Add insulation to enhance energy efficiency VP Roofing solutions can resolve interior valley gutters and drainage problems caused by additions and extensions to existing buildings. 8

9 /VPB BUYLINE 3500 Varco Pruden Roof Insulation Solutions THERMALIFT INSULATION SYSTEM FOR SSR Raising the roof for higher R-values Up to 15 total insulation capacity Designed exclusively for use with SSR Four sizes of clips for varying insulation thickness: 3½, 4, 4½ and 5 tall System components for either purlins or WideBay Installs above secondary framing See below for an R- and U-value chart based on varying insulation combinations The ThermaLift insulation system utilizes a unique insulation bridge design. ThermaLift allows for more insulation to be installed above the structural secondary. Thermal performance testing in accordance with ASTM-C1363 has resulted in U-factors as low as The result is a cost-effective roof system that meets today s more stringent energy codes, including IECC 2015 and Canada s NECB 2011 code. SYSTEM PERFORMANCE COMPARISON Assembly 1 +Ht 2 Insulation 3 Total R Tested-U Effective R ThermaLift-11 R16*+R ThermaLift-15½ R19*+R TD-6 SSR R11+R TD-7¼ SSR R13+R TD-8 SSR R16+R TD-9¼ SSR R19+R TD-11 SSR R11+R13+R TD-12¼ SSR R19+R11+R TD-6 SLR-II R11+R TD-7¼ SLR-II R13+R TD-8 SLR-II R16+R TD-9¼ SLR-II R19+R TD-11 SLR-II R13+R13+R TD-12¼ SLR-II R19+R11+R TD-6 PR R11+R TD-8 PR R16+R TD-11 PR R13+R13+R SB-6 SSR R SB-7 SSR R11+R SB-10 SSR R13+R =TD=ThermoDeck (includes DeckLiner); SB=SuperBlock 2=Insulation system height; 3=Lowest layer rolled insulation listed first =No thermal block used; =Panel Rib roof does not utilize thermal blocks SuperBlock values shown are calculated. All others are hot box tested. THERMODECK COMPOSITE ROOF SYSTEM WITH CHOICE OF PANELS Designed for SSR, SLR II, & Panel Rib roof systems Up to 12 space between decking and roof sheeting More layers for more energy savings Decking available in optional gauges and colors See below for an R- and U-value chart based on varying insulation combinations The ThermoDeck system combines VP s superior roof systems and Deck-Liner, our multipurpose deck panel, with multiple layers of uncompressed insulation to provide in-place thermal values of R-20 to R These higher R-values provide maximum thermal comfort as well as meeting and exceeding today s most stringent energy codes. Requires less energy to heat and cool. Additional acoustic barrier means less outside noise can enter the building. SUPERBLOCK FOR SSR SuperBlock is an exclusive insulation system designed specifically for VP s SSR standing seam roof and is capable of delivering an ASTM-C1363 hot box tested, in-place U-factor of using R-13 as bottom layer and R-19 as top layer. The performance of the SuperBlock system is a direct result of the relationship between the uniquely designed metal thermal block cover, the 25-psi polystyrene thermal block material and the fiberglass insulation. VP s SuperBlock holds down the faced blanket as it is placed and the roof clips maintain precise modularity without constant measuring. Other assemblies, such as VP s ThermoDeck or ThermaLift, can provide better U-factors and higher effective R-values. Note: See chart at left for assemblies and their associative thermal performance. ThermoDeck system for SSR Installing ThermaLift bridge ThermaLift over trussed purlins Providing lift for layers of insulation Hot box tested assemblies 9

10 METAL WALL SYSTEMS Wall Panels Panel Rib Wall Panel Rib Wall Varco Pruden Buildings steel wall and roof systems are designed, engineered and manufactured to give years of efficient, low-maintenance service. Available in a wide selection of attractive color choices, VP panel finishes are warranted for up to 25 years. VP metal panels can be insulated with most standard insulation systems to achieve a thermally efficient building envelope. Additionally, VP offers a complete line of trim and accessory packages including gutters, downspouts and opening trims, windows, doors, entrance canopies, vents and louvers. 26 ga. Galvalume steel standard with 24 or 22 ga. optional unless otherwise noted. PANEL RIB WALL Most economical exterior wall system 36 Coverage Lengths up to 43 1¼ -High Rib Standard crimped base (see illustration) or square cut with base trim Dade County Building Commission Approved Panel Rib is our most economical wall system. In fact, this wall system is more economical than wood, concrete or masonry alternatives. Self-drilling, colormatched fasteners and a 36 panel width give you rapid, economical installation. Standard lengths up to 43 can provide a continuous panel from foundation to eave, eliminating the need for end laps. VEE RIB Features semiconcealed fasteners 36 Coverage Lengths up to 39 1¼ -High Reveal Embossed Finish Semi-concealed fasteners Dade County Building Commission Approved The Vee Rib wall panel features semi-concealed fasteners located in the bottom of the V-groove. Its surface, embossed for aesthetics, reduces glare. Self-drilling fasteners and 36 panel width provide for economical installation. Vee Rib comes in lengths up to 39, which can provide a continuous panel from foundation to eave. This eliminates the need for endlaps and assures you of wall integrity and weathertightness. Panels have a V-groove pattern creating 1¼ reveals. Vee Rib close-up RPR Wall close-up Tech-Four over brick RPR PANEL Reverse-rolled version of Panel Rib 36 Coverage Lengths up to 43 1¼ -High Rib Semi-concealed fasteners Supports 6 of blanket insulation RPR panel is a reverse-rolled version of our popular Panel Rib profile. This economical wall system features self-drilling, color-matched fasteners and a 36 panel width to provide fast and easy installation. RPR Panel comes in lengths up to 43, which can allow a continuous panel from foundation to eave. No need for end laps means better wall integrity and weather tightness. RPR can effectively utilize up to 6 of blanket insulation. Your VP builder can assist you in selecting the optimal insulation approach, considering up-front costs and long term energy savings. TECH-FOUR AND TECH-FOUR PLUS Concealed fastener wall system 16 on-center panel Lengths up to ga. standard Embossed finish Concealed fasteners Tech-Four s sturdy 16 wide panels are 2 deep. The panel design features two, 3/8 -deep by 4 wide recesses. Tech-Four s interlocking, concealed fasteners allow bold architectural lines with embossed surface to enhance appearance. Insulate Tech-Four easily with batt or blanket systems. Our Tech-Four Plus system includes thermal blocks to allow greater insulation cavities optimizing the energy efficiency of your building. Hot-box tested single layer assembly is

11 THERMALCLAD INSULATED PANELS /VPB BUYLINE 3500 Insulated Metal Panels ThermalClad insulated wall panels are ideal for food processing facilities, dry goods warehouses and other controlledenvironment buildings where temperature and insulation values are critical. The lightweight yet durable panels have a superior insulating value which is maintained throughout the life of the building. All insulated cores of ThermalClad panels are made from foam-in-place blister-free, non-cfc polyurethane, which meets the requirements of most major building codes for cold storage construction. ThermalClad panels have been tested and received a Factory Mutual- Class 1 approval. Exterior embossed surface except Tuff-Wall. Offset double tongue-and-groove side joint Fastener head and clip concealed in side joint R-values up to R available Four thicknesses available: 2, 2½, 3 and 4 Standard lengths are 8-53 on 42" wide panels USDA approved finishes available Interior panels are planked style 26 gauge steel, factory coated with a white polyester finish. ThermalClad Architectural ARCHITECTURAL Flush appearance 36 Coverage with lengths from ga. G-90 steel external with 26 ga. internal standard VP s Architectural wall panels are designed for high profile projects that require a lightly embossed, flush exterior wall finish. This panel is 36 wide and available in four thicknesses. The exterior panels are made from extra heavy-duty 22 gauge, G-90 galvanized and/or AZ50 aluminum - zinc coded steel. TUFF-WALL An insulated metal panel with the look of stucco 42 panel width Standard lengths from 8-40 A 10-year limited warranty Durable finish highly resistant to impact and abrasion VP s Tuff-Wall is an exceptionally attractive stucco-like insulated wall panel that provides a highlydesired look. The panel s textured surface has a hard aggregated fiber reinforced polymer coating created with the factory applied Tuff-Cote finish system. Tuff- Cote finish offers an extremely durable, impact and abrasion resistant coating that withstands severe weather conditions. Unlike field-applied finishes that are vulnerable to damp or cold weather, Tuff-Wall panels can be erected in virtually any weather condition. As an added value, Tuff-Wall panels can function as the finished interior walls in many applications. Maximum panel length is 40. Four thicknesses are available. Exterior metal walls are a sturdy 24 gauge steel, surrounding an insulated core of foamed in place, blister free, non-cfc polyurethane. SHALLOW PLANK For clean lines 42 Coverage 26 ga. G-90 steel external with 26 ga. internal standard; 24 ga. external optional VP s ThermalClad Shallow Plank Panels feature sturdy 26 gauge steel panels on both exterior and interior faces. The exterior panels are embossed G-90 galvanized and/or AZ50 aluminum - zinc coded steel and factory-formed with vertical lines to present an attractive and durable finished wall ideally suited for most commercial and industrial buildings. Four thicknesses are available. REVEAL Bold lines 42 Coverage 26 ga. G-90 steel external with 26 ga. internal standard; 24 ga. external optional Reveal panels feature sturdy 26 gauge steel panels on both exterior and interior faces. The exterior panel is factory-formed with bold vertical lines to present an attractive and durable finished wall, ideally suited for most commercial and industrial buildings. Exterior panel is embossed G-90 galvanized and/or AZ50 aluminum - zinc coded steel. Four thicknesses are available. R-VALUES WITH AIR FILMS Panel 75 Mean 40 Mean Thickness Temperature Temperature ½ ThermalClad Shallow Plank ThermalClad Reveal ThermalClad Tuff-Wall Tuff-Wall with masonry 11

12 Architectural Panels TextureClad and ImpressaClad are designed to meet the demands of local building ordinances where traditional metal wall panels are prohibited. 20-year finish warranty. Color-matched accessories Concealed fastener installation Installed panel width is 16 Lengths from 14 to 30 Panels attach directly to standard wall girts Alternating TextureClad colors TextureClad around openings TEXTURECLAD A durable metal panel with the look of textured stucco Low maintenance Lightweight 2 lbs/sq. ft. Factory applied stucco finish Available in 24 standard colors TextureClad combines the rich look of textured stucco with the strength and durability of 20 gauge steel to create a lightweight, easy to install, exterior wall system. Panels are coated with a specially formulated blend of fiber reinforced polymer/aggregate composition and are oven-cured to assure added durability. Finish is resistant to water, cracking, flaking, chalking and mildew. TextureClad Colors IMPRESSACLAD Embossed surface helps with local code restrictions Clip-less design Lightweight 2 lbs/sq. ft. 20 year warranty 4 standard colors (custom colors available) ImpressaClad is an architectural wall panel system that combines heavy gauge galvanized steel with embossed color finishes. ImpressaClad panels are manufactured from 20 gauge galvanized G-90 steel, coated with long-life Kynar paint finishes in 4 unique colors. Kynar paint finishes are respected for their durability, resistance and color retention. To incorporate up to 6 of insulation, hat channels are required. ImpressaClad Colors TextureClad Façade Linen White Regal White Haze Sandstone Linen Ash Gray Cloud Platinum Ash Steel Tan Sand Plantation Wheat These panels can utilize rigid board insulation ImpressaClad Khaki Surrey Beige Doeskin Cocoa Driftwood Fog Taupe Taupe Sand ImpressaClad Light Stone Sandstone Sage Gray TextureClad or ImpressaClad could be used as a soffit 12

13 /VPB BUYLINE 3500 Alternative Wall Solutions Varco Pruden framing systems permit an unlimited variety of materials to use as a building exterior. Regardless of the type of project, VP systems can be combined with wood, stone, brick, block, glass, tilt-up concrete or EIFS, adding design flexibility and economy. Additional examples can be seen at vp.com. VP has manufactured thousands of projects where the architect or owner preferred an alternative to exterior metal panels. Choose from a variety of exterior cladding. Stone and wood walls Tilt-up concrete walls Liner Panel & Soffit Solutions DECK-LINER Dual purpose interior panel 36 wide coverage, ½ nominal depth Zinc coated steel, lengths vary by gauge 28 & 22 gauge available in polyester white or Galvalume finish up to 41-8 Available in 24 and 26 gauges in VP s standard KXL color finishes This dual purpose liner panel performs well as part of a composite roof system or as a interior wall panel. Longer lengths available with considerations for shipping and erection. LPR-36 LINER Economical interior wall system 36 Coverage Lengths up to 43 Same profile as Panel Rib 12 on center ribs 28 ga. zinc coated steel LPR-36 Liner panel is an ASTM A653 Grade 33 steel with AZ50 coating. The panel is painted with a Cool Cotton White silicone modified polyester (SMP) finish on one side and a gray primer coating on the reverse. FP-12 SOFFIT Beaded or flush Lengths from 2 to 30 [panel lengths over 15 require stiffening bead(s)] 12 wide and 7/8 deep panel profile 24 ga. standard Concealed fasteners Smooth face (12 flat limited to applications less than 15 ); one stiffening bead (6 /6 ) or two stiffening beads (4 /4 /4 ) FP-12 is available in standard 24 gauge and a limited selection of our long-life our KXL colors. Deck-Liner as Interior Wall LPR-36 liner in a gymnasium LPR-36 liner in a factory FP-12 soffit under canopy Glass curtain wall with masonry exterior FP-12 soffit with Vee Rib Wall 13

14 PrisMAX SL PrisMAX SL Daylighting Solutions PRISMAX SL & TRU Prismatic lens allows for optimal daylighting without creating hot spots Sturdy aluminum framing Patented diverter eliminates need for curb Easy to install in new or retrofit applications Available in 2 x10 units Units can be linked from ridge to eave Featuring a prismatic lens, VP s unique skylight product is designed to work with VP s standing seam roof systems. PrisMAX SL (strip light) delivers long term weathertight performance with 70% light dispersal. With a custom designed water diverter and sturdy aluminum framing, PrisMAX SL becomes an integral part of the standing seam roof system and does not require a standard curb system to provide a barrier against leaks. The skylight units are 2 wide to match the roof panel width and come in 10 lengths. Units can be linked to form continuous skylight between the ridge and eave. An optional triple dome lens is available for high humidity environments. PrisMAX TRU is a Tuf-Lite Replacement Unit. TRANSLUCENT TUF-LITE & WALLITE Allows 65% light transmission Tuf-lites for SSR or Panel Rib Roof profile Wallites available in Vee Rib or Panel Rib profiles Corrosion, chemical and weather resistant Class 1 fire rated; exceeds ASTM D3841: ICBO listing #5048 Insulated condensation-resistant Tuf-lites optional Choose these VP panels when natural diffused lighting is desired for brighter working conditions as well as savings on lighting costs. These translucent panels are made of white, fire-retardant FRP (fiber reinforced polymer) allowing for light transmission of 50%. And both Tuf-Lite and Wallite panels are extremely cost effective because they are incorporated right into the roof and wall panels of the building. Tuf-Lites are available for SSR and Panel Rib Roof. Choose Panel Rib or Vee Rib Wallite profiles. Panel Rib profile Tuf-lites Wallites DuraCurb DURACURB Rust-free aluminum curb Diverter plate channels rainwater to prevent pooling Internal flange and pre-punched holes for fasteners eliminate water access Mitered corners and seams joined by weathertight, maintenance-free welds All components designed for VP s SSR or SLR II Roof The standard DuraCurb is an all-aluminum, mill finished curb body. Painted curbs are also available. Packaged as kits, these curb units arrive at the job site ready to install, complete with support framing, closures, fasteners, sealants and installation guide. DuraCurbs are easy to install, maintenance-free and offer weather tight protection for roof penetrations at HVAC units, sky-lights, smoke hatches and other roof openings. DuraCurb can be installed in new construction or retrofitted on an existing roof. DuraCurb is the only approved curb product available for Varco Pruden s Optima warranty. CFR CURB SYSTEM One piece construction Built-in cricket channels rainwater to prevent pooling Internal flange and pre-punched holes for fasteners eliminate water access Mitered corners and seams joined by weathertight, maintenance-free welds All components designed for VP s SSR or SLR II Roof CFR Curb is an all-aluminum, mill finished curb body welded into a single unit. Painted curbs are also available. Packaged as kits, these curb units arrive at the job site ready to install, complete with support framing, closures, fasteners, sealants and installation guide. CFR curbs are easy to install, maintenance-free and offer weathertight protection for roof penetrations at HVAC units, sky-lights, smoke hatches and other roof openings. Install CFR on new construction or retrofit on an existing roof. 14

15 ALTERNATIVE WALL & ROOF SYSTEMS /VPB BUYLINE 3500 Accessories to Complete Your Building Project Varco Pruden offers a variety of items to make your finished building an attractive, functional, high-quality structure. SKY-WEB II Provides protection during and after construction 2¾ x 2¾ knotted nylon mesh protects workers Made-to-order for each building configuration, with the exception of skews, hips and valleys The Sky-Web II Fall Protection and Insulation Support System is an innovative passive restraint system that protects workers from falls at the leading edge of a roof. It does this by providing a web of knotted nylon mesh that is attached to the perimeter of the roof s secondary structural members. With minimal investment, Sky-Web II increases safety and efficiency, reduces injury, and is easy to install. EXPI-DOORS Pre-assembled or Job Site Assembled Baked on primer in white or bronze meets Steel Door Institute standards Door leaf options include glazing alternatives and can be insulated or non-insulated Includes quality hardware and hinges to ensure added security Series 700 is the architectural line with the highest quality components. Series 500 is designed for the value-oriented project while still meeting or exceeding Steel Door Institute (SDI) standards. The 500 and 400 models are available as pre-assembled or siteassembled (knock-down). Adjustable anchors are optional and knock-down typically does not include sub-framing (c-channel). Knock-down components are supplied loose and require field installation. Field installation time varies due to the amount and difficulty of hardware to install, and the skill and experience of the installer. Installation will generally take between 2-8 hours with many erectors using the maximum for planning purposes. Various options, warranties and energy ratings depend on the model. SSR SKY WALK Tread confidently on your SSR roof Easy-to-install step system 20 ga. Galvalume steel with an antiskid surface Rated for 500 lbs per square foot Parallel or perpendicular kits with (5) 24 x 24 nominal steps Heavy foot traffic on a seamed roof can cause irreparable damage to the seams. However, when repairs or maintenance to roof top equipment or installations are necessary, there is a safe and sturdy solution. Sky Walk units fit securely between the standing seam roof seams and interlock to form a consistent path by which to reach areas of your SSR roof where HVAC, satellite dishes, vents, smoke hatches, and skylights reside. Attachment does not penetrate the roof system. Sold and packaged in kit form, with all sealants and components needed for a complete installation. STANDARD & LOW-E WINDOW SOLUTIONS See improved U-factors out of our windows 2500 Series A premium 2½ thermally broken window available in slider, fixed, single-hung and projected configurations. Available in multiple glazing options. C225 A non-thermal aluminum window that is available in slider, fixed and single-hung configurations. Options include interchangeable fins that allow for self-framing installations. Universal fins allow for installation into a framed opening with no additional flashing needed. Both windows and trim are available in standard white or bronze paint. A complete line of thermally broken and non-thermal aluminum windows designed to work specifically for VP s building systems. Low-E glass reduces the emissivity of the glass surface of a window and improves insulating properties. Sky-Web II prevents falls Low-E Windows Ridge vents Louvres Walk-door canopies 15

16 VARCO PRUDEN BUILDINGS 3200 Players Club Circle, Memphis, TN Varco Pruden Buildings, a division of BlueScope Buildings North America, Inc. All rights reserved. Service Center Locations ARKANSAS CALIFORNIA MISSOURI 1115 Commerce Road 7440 W. Doe Ave Lower Lake Road Pine Bluff, AR Visalia, CA St. Joseph, MO NORTH CAROLINA TENNESSEE WISCONSIN 7031 Albert Pick Drive, Suite Players Club Circle 273 Water Street Greensboro, NC Memphis, TN Evansville, WI Participating Organizations Metal Building Manufacturers Association Founding Member Metal Building Contractors & Erectors Association Member US Green Building Council Member Canadian Sheet Steel Buildings Institute Affiliate Member Canadian Sheet Steel Building Institute Certifications VP Buildings leads the industry in meeting or exceeding the highest standards of testing and certification. AC 472 IAS/IBC AC 472 Accredited Cool Roof Rating Council Miami-Dade County Approved ASTM International Energy Star Underwriters Laboratories Approved CERTIFIED Canadian Welding Bureau Construction Specifiers Institute Factory Mutual Florida Building Code Approved US Army Corps of Engineers For more specific information, ask for item #2099, where approvals and certifications for Dade County Florida to California Title 24 requirements, US Corps of Engineers to Factory Mutual and Underwriters Laboratory Wind Uplift approvals are identified.