HOW TO CUT FRUIT & VEGETABLE. The Global Leader in Food Cutting Technology URSCHEL LABORATORIES, INC. 1

Transcription

1 HOW TO CUT FRUIT & VEGETABLE P R O D U C T S The Global Leader in Food Cutting Technology LABORATORIES, INC.

2 (LEFT TO RIGHT) /" (9. mm) Dice /8" (9.5 mm) Strip /8" (9.5 mm) Dice /8 x (9.5 x 5. mm) Strip (LEFT TO RIGHT) Onions /" (6. mm) Dice & Strip /" (6. mm) Dice Cabbage /8" (. mm) Dice SPRINT DICER SPRINT DICER WITH CONVEYOR BELT The new ßß Sprint Dicer builds on the popularity of the DiversaCut Sprint and is inspired by the longstanding success of the Urschel Model G Dicer. The Sprint offers food processors an alternative to the industry-proven Urschel Model G Dicer and additional benefits compared to the DiversaCut Sprint. The Sprint uniformly dices, strip cuts, granulates, or slices a wide variety of vegetables, fruits, bakery goods, and meats. s: Produced by removing the crosscut spindle and the circular knife spindle. Flat s: /6 to " (.6 to 5. mm) Motor choices include a stainless steel HP (. kw) motor controlled by a VFD (variable frequency drive) - more power versus the standard Model G or DiversaCut Sprint. New dial-in slice adjustment with lockdown knob ensures closer tolerances throughout production runs. Sanitary in design, the food cutting zone is completely isolated from the mechanical zone; rounded tube frame and sloped sheet metal contribute to overall sanitation. Hinged access panels promote sanitation and ease of maintenance. The machine accepts product input up to 6.5" (65. mm) in any dimension.. Impeller Paddles. Slicing Knife. Circular Knives. Crosscut Knives NON-CONVEYOR VERSION Compact cutting zone and wide range of cuts Discharge height of 5" (8 mm) from the floor, or " (60 mm) to mate with a conveyor system. Lower cost alternative versus conveyor version. Available with HP (. kw) VFD, HP (. kw) soft start, or.5 HP (. kw) soft start motor. CONVEYOR VERSION Compact cutting zone and wide range of cuts Discharge height of 0" (79 mm) from the floor Offers an upgraded, potential replacement of a Model G or H series dicer with a similar footprint. Built-in conveyor optimizes controlled, complete discharge of cut product to reduce waste. Available with HP (. kw) VFD or HP (. kw) soft start motor. CONVEYOR VERSION Length:...70." (786 mm) Width: " (56 mm) Height: " (58 mm) Net Weight: lb (76 kg) Motor:.. HP (. kw) with VFD...or HP (. kw) with soft start NON-CONVEYOR VERSION Length:...70." (786 mm) Width: " (8 mm) Height: " (58 mm) Net Weight: lb (5 kg) Motor:... HP (. kw) with VFD... HP (. kw) with soft start, or.5 HP (. kw) with soft start Electrical enclosure dimensions will vary depending on motor Crinkle s: /8 to " (. to 5. mm) Strip Cuts: Flat and crinkle strips are made by removing either the crosscut knife spindle or the circular knife spindle assembly. Combinations of circular or crosscut knives can be used to shorten length of strips. Dices/Granulations: A slicing knife, circular knife spindle, and crosscut knife spindle are used for dicing. Changing the dice size is done by using the required cutting spindles and adjusting the slice thickness. Circular knife cuts: /8 to " (. to 76. mm) Crosscut knife cuts: / to " (. to 5. mm) Crosscut knife crinkle cuts: 9/ to 9/6" (7. to. mm) 9/" (7. mm) Crinkle Strip One motor drives both the cutting parts and the conveyor. (LEFT TO RIGHT) Mango /" (9. mm) Dice Mushrooms /" (6. mm) Olives /8" (. mm) Dice Lettuce /" (9. mm) Chop Beets /8" (. mm)

3 DIVERSACUT SPRINT DICER A precursor to the new Sprint, the ßßDiversaCut Sprint Dicer is a high performance dicer designed to uniformly dice, strip cut, and slice a variety of products. Compared to the Sprint, this machine offers a discharge height of 5" (8 mm) and a.5 HP (. kw) motor. Designed for small to mid-size processors, the dicer accepts a maximum infeed of 6.5" (65. mm) in any dimension. SLICES: The machine can make a full range of slices by removing the crosscut and circular knife spindles. Flat or crinkle slices: /6 to " (.6 to 5. mm) Onions /" (6. mm) Dice /8" (9.5 mm) Dice Length:...5.8" (67 mm) Width: " (86 mm) Height: " (666 mm) Net Weight: lb (90 kg) Motor:...5 HP (. kw) Length: " (67 mm) Width:... *6.6" (66 mm) Height: " (78 mm) Net Weight: lb (680 kg) Motor: 5 HP (.7 kw) or 0 HP (7.5 kw) * Various discharge chutes are available. Machine width varies depending on style of discharge chute. Width listed is the maximum machine width available.. Impeller Paddles. Slicing Knife. Circular Knives. Crosscut Knives MODEL M6 The Model M6 is a versatile machine designed for dicing, strip cutting, or shredding a variety of products through a wide range of sizes from product of a predetermined thickness. The Model M6 operates continuously at high production capacities, and is designed for easy cleanup and maintenance. DICES: Many sizes available depending on the selection of circular knife spacers and crosscut knife spindle set-up. Circular knife cuts: /6 to -/" (.8 to 8. mm) Crosscut knife cuts: /8 to " (. to 76. mm) standard, up to 5.66" ( mm) with alternate gearing. (with optional top belt). Drive Roll. Feed Roll. Impeller Paddles. Slicing Knife The largest machine in the DiversaCut line, the ßßDiversaCut 0A Dicer produces dices, strips, slices, granulates, and shreds at an increased production capacity versus the Sprint Dicer. With a maximum infeed of 0" (5 mm) in any dimension, the machine offers cost-savings by eliminating the need to pre-cut product. Products widely processed include: potatoes, carrots, onions, cabbage, peppers, celery, tomatoes, aloe vera, apples, papaya, squash, cassava, kohlrabi, cucumbers, eggplant, zucchini, mango, ginger, kale, leek, peaches, pineapple, and strawberries. SLICES The machine can make a full range of slices by removing the crosscut and circular knife spindles. Flat or crinkle slices: /6 to " (.6 to 5. mm) STRIP CUTS Flat and crinkle strip cuts in a variety of widths can be made by removing either the crosscut knife spindle or circular knife spindle assembly. DICES A slicing knife, circular knife spindle, and crosscut knife spindle are used for dicing. Changing the dice size is done by using the required cutting spindles and adjusting the slice thickness. (LEFT TO RIGHT) Length: " (0 mm) Width:....8" (850 mm) Height: " (80 mm) Net Weight: lb (700 kg) Motor: 5 HP (.7 kw) or 7.5 HP (5.6 kw) STRIP CUTS: Strip cuts can be made by removing the crosscut knife spindle from the machine. The length and thickness of strips depends on the size of the original product. (TOP TO BOTTOM) Kale Banana Pepper Leek Spinach /" (6. mm) /8 x /8" / x /8" / x " (9.5 x 9.5 mm) (6. x 9.5 mm) (9. x 5. Dice mm) DIVERSACUT 0A DICER STRIP CUTS: Flat and crinkle strip cuts in a variety of widths can be made by removing either the crosscut knife spindle or the circular knife spindle assembly. DICES: A slicing knife, circular knife spindle, and crosscut knife spindle are used for dicing. Changing the dice size is done by using the required cutting spindles and adjusting the slice thickness. Circular knife cuts: /8 to " (. to 76. mm) Crosscut knife cuts: / to " (. to 5. mm) Crosscut knife crinkle cuts: 9/ to 9/6" (7. to. mm) (LEFT TO RIGHT) Zucchini /" (6. mm) Crinkle (LEFT TO RIGHT) Eggplant /" (9. mm) Dice /8 x x /8" (. x 50.8 x. mm) Flat Crinkle Strip /" (6. mm) Strip Peaches /" (6. mm) Dice. Circular Knives. Crosscut Knives Circular knife cuts: /8 to " (. to 76. mm) Crosscut knife cuts: / to -/" (. to 8. mm) Crosscut knife crinkle cuts (.076" depth): 9/ to.58" (7. to.8 mm) Crosscut knife deep crinkle cuts (.5" or.5" depth): /8 to /" (9.5 to.7 mm) Crosscut knife V-cuts: 5/6 to /" (7.9 to.7 mm) Tomatoes 5/8" (5.9 mm) Dice /8" (9.5 mm) Deep Crinkle Strips Zucchini /8" (. mm) Noodle-like Shred Cabbage /8 x -/ x -/" (. x 8. x 8. mm) 5. Feed Drum. Circular Knives 5. Crosscut 5 Knives 5

4 AFFINITY DICER The Affinity Dicer delivers a sanitary design, maximized output, and precision cuts. Specifically designed for products that are normally difficult to cut including hard to feed vegetables, sticky fruit applications, or acidic/varnished products such as pickles, this robust machine accepts in-feed products up to 7" (78 mm), or up to 0" (5 mm) in largest single dimension depending on the product. The Affinity is available in two versions: with built-in conveyor (shown), and without built-in conveyor. SLICES: thickness: /8 to /" (. to 9. mm) DICES A slicing knife, circular knife spindle, and crosscut knife spindle are used for dicing. Changing the dice size is done by adjusting the slice thickness, variable frequency drive, and cutting spindles as needed. Circular Knife Cuts: /8 to " (. to 50.8 mm) Crosscut Knife Cuts: /8 to " (. to 50.8 mm) STRIP CUTS Flat strips can be made by removing either the crosscut knife spindle or the circular knife spindle. Combinations of circular knives or crosscut knives can be used to shorten the length of the strips. /8 to " (. to 50.8 mm) in length Pickles /6 x /8 x 5/" (.7 x. x.9 mm) Tomatoes /" (6. mm) Dice Length:...7.6" (85 mm) Width:...6.5" (588 mm) Height: " (76 mm) Net Weight: lb (5 kg) Motors:... /6 HP (. kw)... 5 HP (.6 kw)... 5 HP (8 kw) Scallions /" (. mm) Pickle Relish /8 x /8 x /" (. x. x 6. mm) Length:... 6." (7 mm) Width: " (98 mm) Height: " (8 mm) Net Weight: lb (0 kg) Motor:... 5 HP (.7 kw) Zucchini /6" (.8 mm) Julienne Strip (precut to " (5 mm) length) Length: " (87 mm) Width: " (67 mm) Height: " (5 mm) Net Weight: lb (50 kg) Motor:... HP (.5 kw) MODEL RA-A Maximum input product size is -/" (88.9 mm) in any dimension. The RA-A specializes in applications such as hard to feed vegetables, sticky fruits, or acidic/varnished products such as pickles. For a cutting overview, and to learn more about this machine, visit. DICES thickness: /6 to /8" (.6 to 9.5 mm) Circular knife cuts: /8 to " (. to 5. mm) Crosscut knife cuts:.050 to " (. to 76. mm) STRIP CUTS Removing the crosscut knife spindle and shaft enables strip cutting; producing strips of different lengths as determined by product size. A circular spindle change may also be required. MODEL G-A Maximum input product size is 5-/" (9.7 mm) in any dimension. For a cutting overview, and to learn more about this machine, visit. Broccoli Stems /6" (.8 mm) SLICES: Up to /" with optional parts. (precut to DICES: Up to /" (9. mm). " (5 mm) length) STRIP CUTS: Up to 7/" (.5 mm). JULIENNE STRIPS: Julienne strips are available by using only the slicing knife and circular knife spindle. MODEL VSC Garlic /8" (. mm) Dice Peaches /8" (9.5 mm) Dice /8" (. mm) Dice Garlic /6" (.6 mm) /8" (. mm) Dice Dried Cranberries /8" (. mm) Strip. Impeller Paddles. Slicing Knife. Adjustable Gate. Feed Drum 5. Feed Roll 6. Circular Knives 7. Crosscut Knives 8. Stripper Plate Length:...6.8" (959 mm) Width:...6" (88 mm) Height:...5.8" (9 mm) Net Weight: 00 lb (60 kg) Serrano Motor:...5 HP (.7 kw) Pepper Segment Cut /8" (9.5 mm) Sticks The Model VSC produces a wide variety of cuts including segments, crinkle or flat slabs, and square or rectangular strips from many food products including carrots, pickles, zucchini, and potatoes. The Model VSC will accept product up to " (0.6 mm) in diameter. For a cutting overview, and to learn more about this machine, visit. SQUARE STRIPS:.56" (.0 mm) to " (5. mm) RECTANGULAR STRIPS:.8 x.06" (7. x 0. mm) up to.8 x.875" (. x. mm) SEGMENT CUTS:,, 5, 6, 8, 0, or SLABS: Crinkle and flat slab cut sizes are available to meet your product requirements. Onions /6" (.8 mm) s with Rings Intact Pickles /6" (.8 mm) Slab Cut 6 7

5 MODEL CC SERIES /" (6. mm) Shred Broccoli Stems.5" (. mm) V-Shred Sweet.076" (.7 mm) Flat-V Red Cabbage.090" (. mm) Flat Mushrooms /6" (.8 mm) Strawberries /" (6. mm).080" ( mm) "V" Coarse Lattice The Model CC Series of machines uniformly slice, strip cut, shred and granulate a wide variety of food products at high production capabilities with excellent results. Among these products are potatoes for chips, shredded cheese for pizza topping, mushrooms, cabbage, lettuce, onions and carrots for salad ingredients, and a wide variety of nut meats for bakery ingredients. Each machine features interchangeable cutting heads that enable the processor to change *FLAT-V SLICES thickness up to.80" (.6 mm) with. corrugations per inch. Corrugation depth of.5" (. mm); Centers:.7" ( mm). * Limited availability based on customer application. Contact your local Urschel office to verify salability. *Z-CUT SLICES thickness up to.5" (8. mm) with. corrugations per inch. Corrugation depth of.5" (. mm); Centers:.9" (0 mm). * Limited availability based on customer application. Contact your local Urschel office to verify salability. V SLICES thickness up to.500" (.7 mm).5" : 8 V s per inch. V depth of.050" (. mm); Centers:.5" (. mm).." :.7 V s per inch. V depth of.08" (. mm); Centers:." (5. mm). CRINKLE SLICES thickness up to.500" (.7 mm) with -/ waves per inch..75 : Crinkle Depth.08" (. mm), Centers.75" (. mm),.00 : Crinkle Depth.080" (.0 mm), Centers.00" (7.6 mm)..80 : Crinkle Depth.076" (.9 mm), Centers.80" (. mm). FLAT SLICES thickness up to.500" (.7 mm) the type of cut in just minutes. Specially designed disposable knives do not require sharpening and are inexpensive to replace. Each model features continuous operation for uninterrupted production and is designed for easy cleanup and maintenance. The Model CC will accept products measuring up to " (0.6 mm) in any dimension. The Models CCX-D, CC-DL, and CC-D will accept products measuring up to -/" (88.9 mm) in any dimension. FULL & REDUCED FLAT-V SHREDS Full Flat-V Shred: Hexagonal-shaped cross section approximately.50" (.8 mm) on all sides. Reduced Flat-V Shred: Flattened top and bottom that form a corrugated shred. FULL SHREDS & REDUCED V SHREDS Full Shred: Diamond-shaped cross section available in four thicknesses:.070,.097,.5", or *85" (.8,.5,., or *7. mm). Reduced V Shred: V -shaped cross section * Limited availability based on customer application. Contact your local Urschel office to verify salability. OVAL & REDUCED OVAL (CRESCENT) SHREDS.50 Oval Shred: Oval-shaped cross section approximately.5" (. mm) thick by.50" (6. mm) wide..80 Wide Oval Shred:.5" (.7 mm) thick by.80" (. mm) wide. Crescent Shred: Crescent-shaped cross section. Wide Crescent Shred: Wide crescent-shaped cross section. STRIP CUTS Rectangular cross section. Widths: /, /8, /6, /, /8, /, 9/6, and /" (.,.,.8, 6., 9.5,.7,., and 9 mm) GRATING OPTIONS Grating heads offer cuts including powdered parmesan, coarse granules, and a variety of shreds. MODEL CCX-D VERSATILE SLICERS, SHREDDERS, & GRANULATORS Length: " (88 mm), " diam. encl " (659 mm), " diam. encl. Width:....95" (87 mm) Height:...5" (8 mm), " diam. encl....9" (86 mm), " diam. encl. Net Weight:...,000 lb (5 kg) Motor:... 0 HP (7.5 kw) U.S.D.A., Dairy Division Accepted The CCX-D is the premium cheese shredder in the CC line. It combines a fully-enclosed 0 horsepower motor, crank swingaway feed hopper, and is available with a or inch cutting chamber. MODEL CC STANDARD HOPPER Length:...8.0" (0 mm) or 5 HP...5.7" ( mm) 0 HP Width:...5.6" (896 mm) Height:...7" (799 mm) or 5 HP...0.8" (769 mm) 0 HP Net Weight:. 550 lb (50 kg) or 5 HP lb (0 kg) 0 HP Motor:..., 5, or 0 HP (.5,.7, or 7.5 kw) The CC is the industry standard in potato slicing,and is also used for a wide variety of other products. It features a swingaway hopper and is available with a, 5, or 0 horsepower motor. MODEL CC-DL Length: " (585 mm) Width: " (90 mm) Height:....9" (86 mm) Net Weight: lb (8 kg) Motor:... 0 HP (7.5 kw) U.S.D.A., Dairy Division Accepted The CC-DL cheese shredder is similar to the CC-D, but is equipped with a crank swingaway feed hopper, 0 horsepower motor, and a inch cutting chamber. MODEL CC FUNNEL HOPPER WITH EXTENSION Length: " ( mm) or 5 HP... 5." (7 mm) 0 HP Width: " (90 mm) Height: " (989 mm) or 5 HP " (06 mm) 0 HP Net Weight:. 550 lb (50 kg) or 5 HP lb (0 kg) 0 HP Motor:..., 5, or 0 HP (.5,.7, or 7.5 kw) The CC with funnel hopper is widely used throughout Europe for cheese shredding and a wide variety of other applications. It features a swingaway hopper and is available with a, 5, or 0 horsepower motor. MODEL CC-D Length: " (0 mm) 5 HP " ( mm) 0 HP Width: " (90 mm) Height: " (760 mm) 5 HP....6" (797 mm) 0 HP Net Weight: lb (50 kg) 5 HP lb (0 kg) 0 HP Motor:... 5 or 0 HP (.7 or 7.5 kw) U.S.D.A., Dairy Division Accepted The CC-D cheese shredder is the industry standard. It is equipped with a lift-off feed hopper, 5 or 0 horsepower motor, and a inch cutting chamber standard. SLICING. Slicing Knife. Impeller SHREDDING. Slicing Knife. Impeller 8 9

6 Taro Root.060" (.5 mm) /" (6. mm) Zucchini /8" (9.5 mm) Half Moon Banana 5/6" (7.9 mm) Crinkle E TRANSLICER CUTTER The efficient E Tranr Cutter represents the smallest footprint of the Tranr line of cutting machinery. Ideally suited for elongated products, popular applications include: asparagus, carrots, cabbage, celery, leek, cucumbers, peppers, green beans, cassava, lettuce, plantain, and potatoes. Several different interchangeable 0" (508 mm) diameter cutting wheels ( ß Micro, slicing, shredding, and julienne) produce a full range of slices, shreds, and julienne cuts at high capacities. Optional static hold down, non-powered top belt or powered top belt hold down assemblies offer feeding assistance. The E Tranr accepts firm products up to " (0.6 mm) in diameter and leafy-type products up to 6" (5. mm) in diameter. The machine Green Onion /" (6. mm) is available with either a variable frequency drive (VFD) or across-the-line start. Optional preparation table provides a cutting board surface to assist with processing. The feed zone is completely separate from the mechanical zone, and sloped surfaces promote sanitation. Hinged and sliding panels provide full access to all areas of the machine for maintenance and cleaning procedures. The machine features continuous operation for uninterrupted production and is designed for easy cleanup and maintenance. Pickles /8" (. mm) Flat " (50.8 mm) Cut Length: " (560 mm) " (978 mm) with prep table Width:... 5." (897 mm) Height: " (569 mm) " (686 mm) with remote stop Net Weight:... 8 lb (600 kg) Motor:... HP (. kw) Feed Belt Motor:... HP (.75 kw) Jalapeño /" (6. mm) Lemons /8" (. mm) SLICING WHEEL Flat or crinkle slices from / to " (.8 to 76. mm) SHREDDING WHEEL /8" (9.5 mm) to approximately " (76. mm) in length and /6 to 9/" (.6 to 7. mm) slice thickness. JULIENNE WHEEL / x /" to x " (.7 x.7 mm to 50.8 x 50.8 mm) MICROSLICE WHEEL Flat slices:.00 to.0" (.5 to 6. mm) Crinkle slice:.069" (.8 mm) Oval shred:.5" (. mm) thick by.50" (6. mm) wide Julienne strips: /, /8, /6, /, and /" (.,.,.8, 6., and 9. mm) wide by.00 to.0" (.5 to.0 mm) thickness (HALVED) /8 x -/" (9.5 x 8. mm) Green Beans " (5. mm). Feed Belt. Slicing Wheel. Slicing Knives 0

7 Red Cabbage /8" (. mm) Shred Swiss Chard & Spinach /8" (9.5 mm) Strip TRANSLICER 50 CUTTER The capable Tranr 50 Cutter represents the largest footprint of the Tranr line of cutting machinery. Ideally suited for leafy vegetables, popular applications include: romaine, iceberg, kale, radicchio, cabbage, spinach, celery, cucumbers, eggplant, honeydew, cantaloupe, and leek. Several different interchangeable 5" (65 mm) diameter cutting wheels (slicing, crinkle slicing, shredding, and julienne) produce a full range of slices, shreds, and julienne cuts at the highest capacities found in the Tranr line. An optional static hold down assembly is available for feeding assistance. The Tranr 50 accepts firm products up to 6-/" (7 mm) in diameter and leafy-type products up to 8" (0 mm) in diameter. To accommodate different types of products, the machine offers a choice between three feed belt configurations: primary belts only, primary and secondary belts, or full length primary belts. The machine operates via a variable frequency drive (VFD). Hinged panels provide full access to all areas of the machine for maintenance and cleaning procedures. The machine features continuous operation for uninterrupted production and is designed for easy cleanup and maintenance. Papaya /" (9. mm) Celery " (76. mm Stick, /" (.7 mm) Length: " (8 mm) Width: " (67 mm) Height: " (695 mm) Net Weight: lb (680 kg) Motor:... HP (. kw) Feed Belt Motors (): HP (.75 kw). Feed Belt. Julienne Wheel. Julienne Knives Iceberg Lettuce /8" (. mm) Shred -/8 x -/" (.9 x 8. mm) Length:..." (6 mm) Width:...96" (8 mm) Height:...9" ( mm) Net Weight:..88 lb (00 kg) Motor:... HP (. kw) Feed Belt Motor: / HP (.56 kw). Infeed Belt. Slicing Wheel Leek /" (.7 mm) SLICING WHEEL Flat or crinkle slices from / to -/" (.8 to 88.9 mm) SHREDDING WHEEL /8" (9.5 mm) to approximately " (76. mm) in length and /6 to 9/" (.6 to 7. mm) slice thickness. JULIENNE WHEEL /8 x /8" to x " (9.5 x 9.5 mm to 76. x 50.8 mm) MODEL OC The Model OC r is used to make a distinctive bias cut on elongated products. The machine cuts an included angle of 0 degrees with the long axis of the product. This causes the slices to be radically different in appearance than the standard crosscut pieces. One slice is made at a time which prevents any crushing of the product. The Model OC features a wide selection of slice thicknesses from which to choose, continuous operation for uninterrupted production, and is designed for easy cleanup and maintenance. The machine is not suitable for slicing sticky products or products that have a high concentration of sugar. The Model OC will accommodate products up to -/" (69.9 mm) in diameter or width. Lettuce /8" (9.5 mm) Julienne Strip. Cutting Knives BIAS FLAT AND CRINKLE SLICES: A wide range from /6 to -/" (.6 to.5 mm). When specially equipped with a ß Micro wheel bias flat slices can range from.00 to.0" (.8 to mm). Consult Urschel for further details. (Top to Bottom) /8" (. mm) Bias Flat Plantain /6" (.5 mm) Bias Flat Asparagus /8" (9.5 mm) Bias Flat

8 COMITROL PROCESSORS The Comitrol Processor is widely used throughout the world as an effective solution for a multitude of dry, paste, and liquid size reduction applications. Several different models are available to accommodate different applications. Comitrol Processors vary in feed/discharge configurations, cutting head and impeller options, and horsepower. Every model features continuous operation for high capacity throughputs and simple cleanup. Standard operations include: granulating, flaking, slicing, milling, shredding, liquefying, pureeing, and dispersing. The word Comitrol means controlled comminution. Comminution is the process of reducing something to a smaller size. The Comitrol uses the principle of incremental shear; the product is efficiently and uniformly reduced gradually as it continues to rotate and pass through a stationary reduction head. MODEL 700 Variety of 6" diameter Slicing Heads offer thicknesses from about.00 to.060" (.5 up to.5 mm) MODELS 500 & 700 Variety of 6" diameter Microcut Heads offer the smallest particle sizes from about.00 up to.07" (.0 up to.6 mm) MODELS 700 & 600 Variety of 6" diameter Cutting Heads offer sizes from about.00 up to.5" (.5 up to 8. mm) Seaweed Model 700 Avocado Coarse Puree Model 700 MODEL 900 Variety of " Microcut Heads offer approximate size range from microdimensions up to.00" (. mm). The " (0.8 mm) diameter microcut head/impeller (left) is twice the size of the microcut head/impeller used on the Model 700 (right). Mango Puree Model 700 Ginger Paste Model 700 Kale Model 700 Dehydrated Lemon Peel Model 700 Tomato Catsup Model 500 Red Bean Paste Model 600 Microcut Head. Impeller. Cutting Blades Baby Food, Peas Model 900 Broccoli Model 700 Cutting Head. Impeller. Horizontal Separators. Vertical Knives Slicing Head. Impeller. Slicing Knife Textured Vegetable Protein Model 700 MODEL 500 Length:...5." (06 mm) Width:..." (86 mm) Height:...*7." (8 mm) Net Weight:..00 lb (500 kg) Motor:...5, 0, or 0 HP... (.,., or 0 kw) * Height with 0 HP motor. This height will vary depending on horsepower and motor manufacturer. The Comitrol Processor Model 500 is recommended for specific applications refining or finishing free-flowing liquids or viscous slurries. Applications include: peanut butter, nut milks, soy beans for soy milk, purees for fruit juices, pepper slurries for mash or hot sauce, tomatoes for catsup, fruits and vegetables for baby foods and soups. Maximum infeed dimension is /8" (9.5 mm), but may depend on microcut head and impeller used. Soy Milk Model 900 MODEL 700 Length: " (88 mm) Width:..." (86 mm) Height:...*7." (8 mm) Net Weight:..00 lb (500 kg) Motor:...5, 0, or 0 HP...(.,., or 0 kw) * Height with 0 HP motor. This height will vary depending on horsepower and motor manufacturer. The Comitrol Processor Model 700 is the most versatile machine in the Comitrol line. It's wide range of applications include reductions for spices, flavorings, soups, pastes, salsas, sauces, and beverages. Two-piece enclosure eases disassembly and cleaning. Optional parts assist in creating an enclosed cutting zone to deter escape of dust, vapor, and liquid when installed with a collection system. Maximum infeed dimension is dependent on type of cutting head and impeller. Potato Flakes Model 600 MODEL 600 MODEL 600 SLANT Length: " (907 mm) Width:... 9." (7 mm) Height: " (98 mm) Net Weight: lb (80 kg) Motor:... 0, 0, 60, or 75 HP...(7.5, 9.8,.8, or 56 kw) Denotes 600 slant with 0 HP motor. Specifications will vary depending on motor. MODEL 600F Length: " (55 mm) Width:...." (86 mm) Height: " (76 mm) Net Weight:...80 lb (7 kg) Motors:...Impeller-0 HP (7.5 kw)..screw Feeder- HP (.5 kw) The compact size of the Comitrol Processor Model 600 is ideal for small volume to high capacity production. Applications include reductions of bakery goods, fruits and vegetables for pastes, flavorings, granulations, salsas, relishes, and bits. Maximum product infeed is.5" (6.5 mm) in any dimension. Deli Mustard Model 900 MODEL 900 MODEL 900 Length: " (57 mm) Width: " (56 mm) Height: " (5 mm) Net Weight:..6 lb (7 kg) Motor:...50 or 00 HP...( or 9. kw) MODEL 900 WITH FEEDER (shown) Length: " (89 mm) Width: " (56 mm) Height: " (5 mm) Net Weight:..500 lb (590 kg) Motors:...50 or 00 HP...( or 9. kw)..screw Feeder- HP (.5 kw) The Comitrol Processor Model 900 is the largest in the Comitrol series. The machine is designed for onepass particle size reduction when the final product will be a slurry, paste, liquid, or powder. By using as much as 00 HP (9 kw), much larger throughputs are possible. Standard soft start gradually powers up the machine by creating a reduced inrush current allowing more efficient utility management. Maximum product infeed is /8" (9.5 mm). Garbanzo Bean Paste Chili Sauce Model 700 Model 500 5

9 DESIGNERS AND MANUFACTURERS OF PRECISION SIZE REDUCTION EQUIPMENT YOU ARE INVITED TO TEST CUT YOUR PRODUCT Urschel has a complete network of test facilities and experienced service and sales representatives around the world ready to work for you on any size reduction application. Contact your local Urschel representative to schedule a comprehensive, noobligation test cut today at Tranr series cutters and may contain parts protected by U.S. Patent nos. 6870, 68709, 660, 6798, 6908, 809, and European and other foreign patents. ß The Micro Wheel may contain parts protected by U.S. Patent nos. 5998, 68709, 7780, 7767, 800, and European and other foreign patents. ßß Affinity, DiversaCut 0A, DiversaCut Sprint, and Sprint Dicers may contain parts protected by U.S. Patent nos. 688, 9969, D76099, and European and foreign patents. The Model CC series may contain parts protected by U.S. Patent nos , 77000, 75, 7658, 86856, 99086, 9690, D7066, D70670, D7067, D7067, D707, D7099, D70607, D7068, D7756, D765, D765, D7, and European and foreign patents. The Model OC may contain parts protected by U.S. Patent No The Model VSC and Velocicut may contain parts protected by U.S. Patent no , and European and foreign patents. DiversaCut, DiversaCut 0A, DiversaCut Sprint, Flat-V, Urschel, Comitrol, Sprint, Tranr, Micro, and Velocicut are registered trademarks of Urschel Laboratories, Inc. The DiversaCut 0A, DiversaCut Sprint, and E Tranr are available in NSF (National Sanitation Foundation) International specific certified versions. L970 NOV 06 (s.s. L66)