European Technical Committees
|
|
- Egbert George Brown
- 6 years ago
- Views:
Transcription
1 European Technical Committees I a n G r e e n s m i t h S e n i o r S t a n d a r d s E x p e r t L o n d o n, 1 0 J u l y
2 European Standardization New regulation on European standardization continues to recognise the three European Standardization Organisations (ESOs): the European Committee for Standardization (CEN) the European Committee for Electrotechnical Standardization (CENELEC) the European Telecommunications Standards Institute (ETSI)
3 European Standardization European Standardization is founded on the principles recognised by the World Trade Organisation (WTO) in the field of standardization: Coherence Transparency Openness Consensus Voluntary application Independence from special interests Efficiency
4 European Standardization CEN and CENELEC: based on national representation ETSI: direct industry participation Only standards developed by CEN, CENELEC and ETSI are recognised as 'European Standards'
5 European Standardization CEN and CENELEC are based on the National Standardization Bodies/National Electrotechnical Committees (NSBs/NCs - the members of CEN/CENELEC) NSBs/NCs are the main focal point for all stakeholders for access to the standardization system, both regional (European) and international (ISO/IEC)
6 European Standardization Other than the National Members, who else can be involved? Associates/Partners: represent interest groups of various dimensions at European level Affiliates: the National Standards Bodies from Central and Eastern Europe who may become National Members Partner standardization bodies: National Standards Bodies that are a member of ISO, but are unlikely to become CEN Members or CEN Affiliates for political or geographical reasons Governmental bodies and other authorities, including the European Commission and the European Free Trade Association (EFTA) See new CEN/CENELEC Guide 25 The concept of Partnership with European Organisations and other stakeholders
7 CEN Structure General Assembly (AG) 33 National Members (1 member = 1 vote) + Obs.: Affiliates, Associates, Counsellors STRATEGY Administrative Board (CA) 33 National Members (1 member = 1 vote) + Open session: Associates, Counsellors PLANNING Technical Board (BT) 33 National Members (1 member = 1 vote) + Obs: Sector Rapporteurs, Assoc., Counsellors PROGRAMMING Technical Committee (TC) Technical Committee Management Group (TCMG) BT Working Groups DRAFTING Working Group (WG) Structure of CENELEC is very similar
8 What is a CEN/CENELEC Technical Committee? A TC is a technical decision body with precise title, scope and work programme, established in the CEN/CENELEC System by the Technical Board (BT). A TC essentially manages the preparation of CEN/CENELEC deliverables - in accordance with an agreed business plan. A TC is composed of: - Chairperson and a secretary - CEN/CENELEC national members - Observers, including Affiliates, Associates, European Commission and EFTA secretariats
9 Participation in TC meetings The national delegations are nominated by the CEN/CENELEC members. At meetings, CEN/CENELEC national members can be represented by a number of delegates, normally not exceeding three, one of whom acts as head of delegation. Other bodies may delegate observers to meetings. Observers in the TC may be Associates, Affiliates, European Commission and EFTA secretariats On request, observers from organisations that have been granted liaison and Specific PSBs, having indicated that they want and have been granted the right to participate in the TC.
10 Creation of new CEN/CENELEC Technical Committees Proposals for new work (new TC) may originate from a CEN/CENELEC Member; a CEN/CENELEC Technical Committee; the EC or EFTA Secretariat; an international organisation; a European trade, professional, technical or scientific organisation CEN/BT or CENELEC/BT votes on the proposal; if approved, new TC is established CEN members and other parties are informed of first TC meeting and invited to nominate delegates; TC prepares a business plan for BT approval and a programme of work; TC sets up necessary WGs
11 How are standards produced? Standards are created by bringing together all interested parties such as manufacturers, consumers and regulators of a particular material, product, process or service The process of drafting standards in CEN/CENELEC is carried out in working groups (WGs) under the direction of their parent technical committees (TCs) CEN Members and Affiliates contribute to the development process at TC level by the principle of national delegation
12 TC Working Groups (1) A Working Group (WG) is established by a Technical Committee to undertake a specific short-term task within a target date and shall normally be disbanded by its parent body when this is completed. It shall work within clearly defined policy guidelines from its parent body.
13 TC Working Groups (2) A WG is restricted to individual experts appointed by the parent TC or by CEN/CENELEC national members, to serve in a personal capacity WG experts should be aware of national positions on the subject in order to minimize the risk of rejection of the draft standard at a later stage WGs may include experts from organisations which have only observer status in the parent body
14 TC Working Groups (3) Each Working Group shall have a convenor who is responsible for the proper conduct of the work, with or without the help of a secretary The convenor is appointed by the parent body for a period of maximum 6 years, with possible successive extensions of 3 years The convenor should be nominated by his/her NSB/NC
15 Profiles of Technical Bodies and their participants CEN BOSS contains many useful documents on the constitution of TCs and WGs, and the roles of Chairs, WG Convenors and much more: CENELEC website has similar guidance: a/index.html
16 Areas of CEN/TC Activity
17 CENELEC TC Technology Sectors Electric Vehicles Smart Grids Smart Metering Household Appliances Information and Communication Technology Electromagnetic Compatibility (EMC)
18 Standards development in CEN and CENELEC (1) The processes by which standards are developed by TCs are given in the CEN/CENELEC IR Part 2 The rules for the structure, drafting and presentation of European Standards (EN) and for the implementation of European Standards at national level, in order to ensure that the technical content and presentation are identical in all member countries are given in the CEN/CENELEC IR Part 3
19 Standards development in CEN and CENELEC (2) Proposals for new standards may originate from a CEN Member; a CEN Technical Committee; the EC or EFTA Secretariat; an international organisation; a European trade, professional, technical or scientific organisation. Proposals are subject to acceptance criteria
20 Stages in the development of a European Standard 1. Initiation - new work item 2. Drafting - consensus building among WG experts 3. Public consultation - Enquiry 4. Technical comment review and draft amendment 5. Approval yes/no 6. Publication 7. Review Stages 1 to 6 expected to be completed within 3 years
21 Governance of CEN/CENELEC TC work The operation of CEN/CENELEC TCs is largely governed by the CEN-CENELEC Internal Regulations (IR) Part 2 The IR Part 2 specifies (amongst other things): Roles and responsibilities of TCs/SCs/WGs and their members The various CEN/CENELC publications and their associated development processes The appeals process if something appears to go wrong Voting policy In CEN, extra information and guidance is given on the CEN Business Operation Support Systems (BOSS). See:
22 Why is European Standardization important? European standardisation helps to boost the competitiveness of enterprises by facilitating in particular the free movement of goods and services network interoperability means of communication, technological development and innovation European standardisation reinforces the global competitiveness of European industry
23 Support to EU Legislation European standards play a very important role within the internal market, through the use of harmonised standards in the presumption of conformity of products to be made available on the market with the essential requirements relating to those products laid down in the relevant New Approach directives.
24 European International Co-operation CEN ISO co-operation: governed by the Vienna Agreement CENELEC IEC co-operation: governed by the Dresden Agreement Somewhat different modes of working but share the same primary aims of avoiding duplication of effort and reducing time when preparing standards
25 National Committees Why do we need national committees? CEN Members and Affiliates contribute to the development process at TC level by the principle of national delegation national TCs develop the national position taken forward by delegates attending CEN/CENELEC/ISO/IEC TC/SC meetings Experts attending WG meetings are not expected to take national positions but nevertheless should be aware of their national position To decide on how the national vote for CEN/CENELEC enquiry and Formal Vote is to be cast (also for ISO-IEC/CD, ISO/DIS, IEC/CDV and ISO-IEC/FDIS) For CEN/CENELEC Members, to develop purely national standards where there is no equivalent EN
26 National Committees (2) National committees are also sometimes referred as mirror or shadow committees One national committee can mirror one or several CEN/CENELEC TCs Which CEN/CENELEC TCs a country decides to mirror can be decided by the relevant stakeholders
27 Benefits of participation in writing standards Influence content Insider knowledge - competitive edge Trends and ideas Cooperation and networking Sharing of research Applies to National, Regional or International standards
28 Thank you for your attention! Any questions? Ian Greensmith Senior Standardization Expert
Consultation of national and European stakeholders in CEN and CENELEC
Consultation of national and European stakeholders in CEN and CENELEC Background The CEN and CENELEC Ambitions to 2020 call for improvements to the European Standardization System (the System) and its
More informationCouncil of the European Union Brussels, 29 October 2015 (OR. en)
Council of the European Union Brussels, 29 October 2015 (OR. en) 13533/15 COVER NOTE From: date of receipt: 28 October 2015 To: COMPET 484 MI 678 IND 164 RECH 259 ENT 231 TELECOM 200 Secretary-General
More informationEuropean standardization - focus on services & smart cities. Maitane OLABARRIA UZQUIANO CEN-CENELEC Management Centre
European standardization - focus on services & smart cities Maitane OLABARRIA UZQUIANO CEN-CENELEC Management Centre 1 Agenda About CEN and CENELEC European standards and how to participate in the process
More informationGENERAL GUIDELINES FOR THE COOPERATION BETWEEN CEN, CENELEC AND ETSI AND THE EUROPEAN COMMISSION AND THE EUROPEAN FREE TRADE ASSOCIATION
16.4.2003 Official Journal of the European Union C 91/7 GENERAL GUIDELINES FOR THE COOPERATION BETWEEN CEN, CENELEC AND ETSI AND THE EUROPEAN COMMISSION AND THE EUROPEAN FREE TRADE ASSOCIATION 28 March
More informationCreation of a new CEN Technical Committee on Microbiology of the food chain
BT N 11549 Draft BT C067/2019 TECHNICAL BOARD CEN/BT by correspondence For vote Issue date: 2019-04-03 In accordance with IR2 Clause 6.1.4 Deadline: 2019-06-25 SUBJECT Creation of a new CEN Technical Committee
More informationEuropean Smart City Standards Green Digital Charter Workshop EUROCITIES Brussels, 14 October 2015
European Smart City Standards Green Digital Charter Workshop EUROCITIES Brussels, 14 October 2015 Monica Ibido CEN and CENELEC Management Centre, Brussels, Programme Manager, Standards Agenda The European
More informationNORMAPME Experts Tool Kit. A travel guide to the standardisation world. Being a NORMAPME s expert Role & Objectives
NORMAPME Experts Tool Kit A travel guide to the standardisation world Being a NORMAPME s expert Role & Objectives Page 2-4 SMEs & standards : Organisations and Process The expert & NORMAPME Page 5-10 Page
More informationECISS Internal Regulations Part 1. Organization and structure. Date:
European Committee for Iron and Steel Standardization Comité Europeén de Normalisation du Fer et de l Acier Europäisches Komitee für Eisen- und Stahlnormung ECISS Internal Regulations Part 1 Organization
More informationCEN-CENELEC Contribution
CEN Identification number in the EC register: 63623305522-13 CENELEC Identification number in the EC register: 58258552517-56 CEN-CENELEC Contribution To the Internal Market Package Including comments
More informationEuropean Commission Introduction to the CEN Strategic Advisory Body for Occupational Health and Safety (SAB OH&S)
Introduction to the CEN Strategic Advisory Body for Occupational Health and Safety (SAB OH&S) Presented by Matthew Heppleston 28/10/2010 Directorate-General for Employment, Social Affairs and Equal Opportunities
More informationPublic Consultation Standardisation
Public Consultation Standardisation Introduction Standardisation within Europe is a voluntary cooperation amongst industry, consumers, public authorities, social partners and other interested parties,
More informationEstablishment of a new TC on professionals in the field of naturopathy
BT N 10978 Draft BT C193/2017 TECHNICAL BOARD CEN/BT by correspondence For vote according to IR2, clause 6.1.4 Issue date: 2017-11-07 Deadline: 2018-01-30 SUBJECT Establishment of a new TC on professionals
More informationCOMMISSION STAFF WORKING DOCUMENT. Vademecum on European standardisation in support of Union legislation and policies PART III
Ref. Ares(2015)4888510-06/11/2015 EUROPEAN COMMISSION Brussels, 27.10.2015 SWD(2015) 205 final PART 3/3 COMMISSION STAFF WORKING DOCUMENT Vademecum on European standardisation in support of Union legislation
More informationFor vote Issue date: According to IR2 Clause Deadline:
BT N 11389 Draft BT C193/2018 TECHNICAL BOARD CEN/BT by correspondence For vote Issue date: 2018-12-05 According to IR2 Clause 6.1.4 Deadline: 2019-03-05 SUBJECT Creation of a new CEN Technical Committee
More informationCEN and CENELEC s ambitions to 2020
CEN and CENELEC s ambitions to 2020 Realizing our ambitions At their General Assemblies (AGs) in Copenhagen on 20 June 2013, the members of CEN and CENELEC approved a document setting out a set of six
More informationEffective participation of Societal Stakeholders in Standardization
CLC(DG)1318 March 2017 Effective participation of Societal Stakeholders in Standardization Societal Stakeholders Organizations right to submit an Opinion Introduction Standards have a broad impact on society,
More informationANEC PROPOSALS FOR IMPROVING PUBLIC INTEREST STAKEHOLDER PARTICIPATION IN CEN AND CENELEC
ANEC PROPOSALS FOR IMPROVING PUBLIC INTEREST STAKEHOLDER PARTICIPATION IN CEN AND CENELEC INTRODUCTION The New Approach to Technical Harmonisation entrusted the European standardisation organisations with
More informationWhat Brexit means for industry standards
What Brexit means for industry standards Maintaining status and influence for UK industry Executive summary: Standards are good practice agreements used voluntarily by business and industry to: Enable
More informationExecutive Summary. CEN Identification number in the EC register: CENELEC Identification number in the EC register:
CEN Identification number in the EC register: 63623305522-13 CENELEC Identification number in the EC register: 58258552517-56 CEN and CENELEC position on the consequences of the judgment of the European
More informationAdditional guidance from the TMB on stakeholder engagement
Additional guidance from the TMB on stakeholder engagement About this document Additional guidance from the TMB on stakeholder engagement In recent years, to be responsive to both current and new stakeholder
More informationExploiting Research Through Standardization. A best practice guide
Exploiting Research Through Standardization A best practice guide Table of Contents 1 Introduction 1 2 The Benefits of Standards and Standardization 2 2.1 What are standards? 2 2.2 Who benefits from standards?
More informationTECHNICAL BOARD BT N Draft BT C155/2018. CEN/BT by correspondence. For vote Issue date:
BT N 11323 Draft BT C155/2018 TECHNICAL BOARD CEN/BT by correspondence For vote Issue date: 2018-10-03 According to IR2 Clause 6.1.4 Deadline: 2019-01-08 SUBJECT Proposal to create a new CEN/TC Public
More informationDate of circulation. Type of technical body proposed (TC / SC / BTTF)
PROPOSAL for a NEW FIELD OF TECHNICAL ACTIVITY Date of circulation. Secretariat SIS Type of technical body proposed (TC / SC / BTTF) CEN/TC / SC N. (where appropriate) CENELEC/TC / SC (Sec). (where appropriate)
More informationCELMA RESPONSE TO THE COMMISSION CONSULTATION ON STANDARDISATION. 21 May 2010
http://ec.europa.eu/enterprise/policies/european standards/public consultation/index_en.htm 21 May 2010 INTRODUCTION TO THE CELMA COMMENTS / GENERAL PRINCIPLES: CELMA deems the European standardization
More informationAmerican Access to the European Standardization Process a u g u s t
American Access to the European Standardization Process a u g u s t 1 9 9 8 Introduction In December 1996 ANSI produced a publication entitled American Access to the European Standardization Process. This
More informationC-Roads Platform Terms of Reference
C-Roads Platform Terms of Reference Dissemination level: C-Roads Platform internal Author: AustriaTech Status: Final Index 1 Purpose... 3 2 Governance Structure... 4 3 C-Roads Steering... 6 3.1 Tasks and
More informationC-Roads Platform Terms of Reference
C-Roads Platform Terms of Reference Dissemination level: C-Roads Platform internal Author: AustriaTech Status: Final C-Roads Platform Coordinator AustriaTech www.austriatech.at Index 1 Purpose... 3 2 Governance
More informationFOREST EUROPE Structures, Procedures and Work Modalities
FOREST EUROPE Structures, Procedures and Work Modalities FOREST EUROPE is Europe s voluntary high level political process that develops common strategies for its 47 signatories (46 European countries and
More informationEUROPEAN COMMISSION DIRECTORATE-GENERAL FOR MOBILITY AND TRANSPORT
EUROPEAN COMMISSION DIRECTORATE-GENERAL FOR MOBILITY AND TRANSPORT Directorate E - Aviation and international transport affairs E2 Single European Sky Ref. Ares(2014)2630792-08/08/2014 DRAFT A EUROPEAN
More informationΟ ΡΟΛΟΣ ΤΗΣ ΤΥΠΟΠΟΙΗΣΗΣ ΓΙΑ ΤΗ ΔΙΑΣΥΝΔΕΣΗ ΕΡΕΥΝΑΣ ΚΑΙ ΑΓΟΡΑΣ THE ROLE OF STANDARDS FOR BRIDGING RESEARCH AND MARKETS
Ο ΡΟΛΟΣ ΤΗΣ ΤΥΠΟΠΟΙΗΣΗΣ ΓΙΑ ΤΗ ΔΙΑΣΥΝΔΕΣΗ ΕΡΕΥΝΑΣ ΚΑΙ ΑΓΟΡΑΣ THE ROLE OF STANDARDS FOR BRIDGING RESEARCH AND MARKETS ΠΡΟΤΥΠΑ ΓΙΑ ΒΙΩΣΙΜΕΣ ΚΑΙ ΕΞΥΠΝΕΣ ΠΟΛΕΙΣ ΕΘΝΙΚΟ ΙΔΡΥΜΑ ΕΡΕΥΝΩΝ (NHRF) 13-10-2017 Cleo
More informationISO INTERNATIONAL STANDARD. Welding coordination Tasks and responsibilities. Coordination en soudage Tâches et responsabilités
INTERNATIONAL STANDARD ISO 14731 Second edition 2006-10-01 Welding coordination Tasks and responsibilities Coordination en soudage Tâches et responsabilités Reference number ISO 14731:2006(E) ISO 2006
More informationBUSINESS PLAN CEN/TC 343 SOLID RECOVERED FUELS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 343 SOLID RECOVERED FUELS EXECUTIVE SUMMARY CEN/TC 343 is established to develop the relevant European Standards for the market for solid recovered fuels. The scope is: Elaboration
More informationB C ISO/IEC INTERNATIONAL STANDARD. General criteria for the operation of various types of bodies performing inspection
INTERNATIONAL STANDARD ISO/IEC 17020 First edition 1998-11-15 General criteria for the operation of various types of bodies performing inspection Critères généraux pour le fonctionnement de différents
More informationScope of the CEN/CENELEC Sector Forum "Energy Management" (SFEM)
SECTOR FORUM ENERGY MANAGEMENT Scope of the CEN/CENELEC Sector Forum "Energy Management" (SFEM) by Bernard GINDROZ, PhD ADEME, (SFEM Chairman) Introduction Since 2006, major development of European Energy
More informationRole of European Standards
Role of European Standards agulacsi@cencenelec.eu Twitter: @Standards4SMEs Programme Manager Innovation CEN-CENELEC Management Centre Is there a role for European Standards? Services in Europe Some examples:
More informationIs there a role for European Standards?
Role of European Standards agulacsi@cencenelec.eu Twitter: @Standards4SMEs Programme Manager Innovation CEN-CENELEC Management Centre Is there a role for European Standards? Services in Europe Some examples:
More informationStandardisation input for EU H2020 projects
Standardisation input for EU H2020 projects (status 05/2014) Author: Karin Eufinger, Centexbel Executive Summary This document is intended for the writers of EU Horizon 2020 projects, who wish to have
More informationNANOTECHNOLOGY WORKSHOP
NANOTECHNOLOGY WORKSHOP 4 July 2012 WELCOME Adrian O Connell General Manager Standards Australia 4 July 2012 INTRODUCTIONS AND FORUM OBJECTIVES Damian Fisher Senior National Sector Manager Operations Health
More informationCouncil of the European Union Brussels, 7 June 2016 (OR. en) Mr Jeppe TRANHOLM-MIKKELSEN, Secretary-General of the Council of the European Union
Council of the European Union Brussels, 7 June 2016 (OR. en) 9969/16 COVER NOTE From: date of receipt: 2 June 2016 To: No. Cion doc.: Subject: COMPET 362 IND 134 MI 430 RECH 227 ENT 113 MAP 21 TELECOM
More informationCommission expert group on INSPIRE Implementation and Maintenance Terms of Reference
INSPIRE INSPIRE/2013/1/4/v5 Infrastructure for Spatial Information in Europe Commission expert group on INSPIRE Implementation and Maintenance Terms of Reference Title Creator Commission expert group on
More informationRULES OF PROCEDURE OF THE MEDICAL DEVICE COORDINATION GROUP. The Medical Device Coordination Group (hereinafter the MDCG ),
RULES OF PROCEDURE OF THE MEDICAL DEVICE COORDINATION GROUP The Medical Device Coordination Group (hereinafter the MDCG ), Having regard to Regulation (EU) 2017/745 of the European Parliament and of the
More informationEFFICIENCY AND ACCOUNTABILITY IN EUROPEAN STANDARDISATION UNDER THE NEW APPROACH
6- * à- # i!r Tir COMMISSION OF THE EUROPEAN COMMUNITIES Brussels, 3.05.998 COM( 998) 29 final $?& &&*'. REPORT FROM THE COMMISSION TO THE COUNCIL 'AND THE EUROPEAN PARLIAMENT # (! EFFICIENCY AND ACCOUNTABILITY
More informationLegal aspects of UK and European Decontamination Standards
Legal aspects of UK and European Decontamination Standards Rob Turpin BSI Healthcare Market Development Manager Scottish Health and Social Care Facilities Conference 4 th November 2016 1 BSI Key Facts
More informationThe International Organization for Standardization (ISO)
The International Organization for Standardization (ISO) Workshop on NTMs, International Standards and sustainable development Belinda CLEELAND Head of Research & Innovation, ISO/CS Bangkok, 2019-03-13
More informationDRAFT STRATEGIC PLAN August V2.0
SOUTH AFRICAN NATIONAL COMMITTEE OF THE INTERNATIONAL ELECTROTECHNICAL COMMISSION AND THE AFRICAN ELECTROTECHNICAL STANDARDIZATION COMMISSION (SANC/IEC/AFSEC) DRAFT STRATEGIC PLAN 2015-2018 25 August 2015-
More informationTC 111 ITALY [TBD] The title of TC 111 is Environmental Standardization for Electrical and Electronic Products and Systems.
SMB/6127/R STRATEGIC BUSINESS PLAN (SBP) IEC/TC OR SC: SECRETARIAT: DATE: TC 111 ITALY [TBD] Please ensure this form is annexed to the Report to the Standardization Management Board if it has been prepared
More informationCEN and CENELEC paper
CEN and CENELEC paper The risks of mutual recognition of voluntary industry standards within the context of a future EU- US trade agreement (TTIP) and alternative approaches CEN-CENELEC Management Centre,
More informationISO INTERNATIONAL STANDARD. Enterprise integration Framework for enterprise modelling. Entreprise intégrée Cadre de modélisation d'entreprise
INTERNATIONAL STANDARD ISO 19439 First edition 2006-04-15 Enterprise integration Framework for enterprise modelling Entreprise intégrée Cadre de modélisation d'entreprise Reference number ISO 19439:2006(E)
More informationCOMMISSION DECISION. of
EUROPEAN COMMISSION Brussels, 13.9.2018 C(2018) 5921 final COMMISSION DECISION of 13.9.2018 setting up the group of experts on digital freight transport and logistics: the Digital Transport and Logistics
More informationDECISIONS. (Text with EEA relevance) Having regard to the Treaty on the Functioning of the European Union, and in particular Article 149 thereof,
L 159/32 28.5.2014 DECISIONS DECISION No 573/2014/EU OF THE EUROPEAN PARLIAMT AND OF THE COUNCIL of 15 May 2014 on enhanced cooperation between Public Employment Services (PES) (Text with EEA relevance)
More informationCONFORMITY ASSESSMENT BOARD (CAB) Meeting 22, Paris,
For IEC use only CAB/697/INF 2007-09-04 INTERNATIONAL ELECTROTECHNICAL COMMISSION CONFORMITY ASSESSMENT BOARD (CAB) Meeting 22, Paris, 2007-10-24 SUBJECT Agenda Item 6.1 CAB Policy: Approved CAB strategy
More informationFree Movement of Goods in the EEA How does it work? Guðrún Rögnvaldardóttir Per-Arvid Sjøgård Anna Constable
EFTA Seminar on the EEA Agreement 06 February 2018 Free Movement of Goods in the EEA How does it work? Guðrún Rögnvaldardóttir Per-Arvid Sjøgård Anna Constable Introduction Free movement of Goods One of
More informationSTANDARDISATION ACTIVITIES IN INTELLIGENT TRANSPORT SYSTEMS IN THE CZECH REPUBLIC
STANDARDISATION ACTIVITIES IN INTELLIGENT TRANSPORT SYSTEMS IN THE CZECH REPUBLIC Eva Gelová 1, Lenka Svorová 2 Summary: The article is aimed on an overview on standardisation activities in intelligent
More informationInternal Regulations Part 1. Organization and structure
Internal Regulations Part 1 Organization and structure January 2018 European Committee for Standardization Tel: +32 2 550 08 11 European Committee for Electrotechnical Standardization Tel: +32 2 550 08
More informationQuality Manual. ISO 9001:2008 Standard. Issue No - 3. April
Quality Manual ISO 9001:2008 Standard Issue No - 3 April - 2010 COPYRIGHT: Renaissance Services-CSG owns the copyright of this document. It may not be copied, reproduced or transmitted in any form without
More informationMARCOGAZ. Marc Florette
TECHNICAL ASSOCIATION OF THE EUROPEAN NATURAL GAS INDUSTRY MARCOGAZ The technical voice of the Gas Industry towards the EU Institutions Marc Florette Vice-President of Marcogaz EFG 2012 20 th June 2012
More informationBrexit and standards Position statement. February 2018
Brexit and standards Position statement February 2018 Since the UK voted to leave the EU in June 2016, the British Standards Institution (BSI), in its capacity as the UK s National Standards Body, has
More informationISO/IEC JTC 1 N 10998
ISO/IEC JTC 1 N 10998 ISO/IEC JTC 1 Information technology Secretariat: ANSI (USA) Document type: Title: Status: Text for PDTR ballot or comment Text of 2nd PDTR 38502, Governance of IT - Framework and
More informationWork programme for European standardisation Luc Van den Berghe, Programme Manager - Research Integration, CEN-CENELEC Management Centre
Work programme for European standardisation - 2015 Luc Van den Berghe, Programme Manager - Research Integration, CEN-CENELEC Management Centre Content 2 slides of generic background on ESOs The 2015 annual
More informationResponse to the public consultation on EU area of skills and qualifications
CEN Identification number in the EC register: 63623305522-13 Response to the public consultation on EU area of skills and qualifications April 2014 CEN (European Committee for Standardization) is an officially
More informationHans Günther Kersten has studied law at the university of Cologne and joined DB in
Hans Günther KERSTEN Hans Günther Kersten has studied law at the university of Cologne and joined DB in Frankfort in 1999. He has held the position of Senior Legal Advisor in the DB Passenger Division
More informationBUSINESS PLAN CEN/TC 92 WATER METERS EXECUTIVE SUMMARY
Date : 2010-09-06 Page: 1/8 BUSINESS PLAN CEN/TC 92 WATER METERS EXECUTIVE SUMMARY Scope Standardization for meters to measure volume flow of cold potable water and heated water enclosed in full conduits,
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15212-2 First edition 2002-03-01 Oscillation-type density meters Part 2: Process instruments for homogeneous liquids Densimètres à oscillation Partie 2: Instruments industriels
More informationEESC SMEs, Crafts and the Professions Category 6th October 2011, Bruxelles
EESC SMEs, Crafts and the Professions Category 6th October 2011, Bruxelles NORMAPME: Making standards better for SMEs European Office of Crafts, Trades and Small and Medium sized Enterprises for Standardisation
More informationGUIDE 60 Conformity assessment Code of good practice
GUIDE 60 Conformity assessment Code of good practice Second edition 2004 ISO 2004 PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may
More informationSTANDARDISATION MANDATE FORWARDED TO THE EUROPEAN STANDARDISATION BODIES IN THE FIELD OF ROAD TRANSPORT TELEMATICS
EUROPEAN COMMISSION DIRECTORATE-GENERAL III INDUSTRY Legislation and standardisation; telematics networks Standardisation, including industrial aspects of electronic commerce Brussels, 24 April 1998 m2897r4e.doc
More informationCommon policy guidance for addressing standardisation on qualification of professions and personnel Version dated
CEN GUIDE 14 Common policy guidance for addressing standardisation on qualification of professions and personnel Version dated 2010-04-21 Contents Page Foreword...3 Introduction...4 1 Scope...6 2 Basics
More informationETUI congratulates the European Commission for the excellent Proposal
ETUI congratulates the European Commission for the excellent Proposal Many aspects can be readily supported, others will need more careful consideration The Commission proposal arrives after a large amount
More informationOrganisation and Structure
Organisation and Structure SNETP_Organisation_v2012-10 Page 1 / 27 Note: This is not a legally binding document but a document setting out the organisation rules of the Sustainable Nuclear Energy Technology
More informationJune 21, 2011 (Tuesday)
June 21, 2011 (Tuesday) 55 th EOQ Congress KEMPINSKI HOTEL CORVINUS Erzsébet tér 7-8, Budapest V. BALLROOM Tuesday 9:00 10:30 8.1. OPENING CEREMONY 9.00 Opening Ceremony Zacharias Bilalis, European Commission,
More informationOIML B 18 Edition 2018 (E)
BASIC PUBLICATION OIML B 18 Edition 2018 (E) Framework for the OIML Certification System (OIML-CS) Cadre pour le Système de Certification OIML (OIML-CS) OIML B 18 Edition 2018 (E) ORGANISATION INTERNATIONALE
More informationForeword by the ANEC President
2014 to 2020 Foreword by the ANEC President ANEC plays an effective and essential role for the protection of European consumers through the European Standardisation System and related legislation. We have
More informationCEN EN16082 A European Standard for Aviation Security Services
CEN EN16082 A European Standard for Aviation Security Services White Paper by CoESS and ASSA-I June 2011 CoESS Confederation of European Security Services Jan Bogemansstraat Rue Jan Bogemans 249 B-1780
More informationFinal Conference June 2012, Cologne
Modular Urban Transport Safety and Security Analysis Final Conference 25 26 June 2012, Cologne The future trends for standardisation presented by Yves Amsler UITP 1 THE PLAYFIELD LEGISLATION MANDATORY
More informationISO INTERNATIONAL STANDARD. Event sustainability management systems Requirements with guidance for use
INTERNATIONAL STANDARD ISO 20121 First edition 2012-06-15 Event sustainability management systems Requirements with guidance for use Systèmes de management responsable appliqués à l'activité événementielle
More informationEUROPEAN COMMISSION INTERNAL MARKET AND SERVICES DIRECTORATE-GENERAL
EUROPEAN COMMISSION INTERNAL MARKET AND SERVICES DIRECTORATE-GENERAL Services Business-to-Business Services Ref. Ares(2013)136099-04/02/2013 Brussels, 24 January 2013 M/517 EN MANDATE ADDRESSED TO CEN,
More informationStandards Committee Nominee Handbook
` Ai Group October 2016 Issue C The Australian Industry Group Standards Committee Nominee Handbook 1 2 Introduction Australian and international standards are ubiquitous and affect the public and private
More informationCOMMISSION DECISION. of on the creation of a High-Level Expert Group on Sustainable Finance in the context of the Capital Markets Union
EUROPEAN COMMISSION Brussels, 28.10.2016 C(2016) 6912 final COMMISSION DECISION of 28.10.2016 on the creation of a High-Level Expert Group on Sustainable Finance in the context of the Capital Markets Union
More informationList of Conclusions and Resolutions agreed at the 33 rd Meeting of the EA Advisory Board held on 22 October 2014
EAAB(14)M33_CRL List of Conclusions and Resolutions agreed at the 33 rd Meeting of the EA Advisory Board held on 22 October 2014 Agenda Item 3 - Key topics for discussion Agenda Item 3.1 - Cases of deviation
More informationCities Alliance CHARTER
Cities Alliance CHARTER As adopted 7 April 2016 Table of Contents I. Introduction... 2 II. Cities Alliance Objectives... 4 III. Cities Alliance Vision...4 IV. Cities Alliance Mission 4 V. Cities Alliance
More informationAUGMENTED REALITY & VIRTUALITY WORKSHOP
AUGMENTED REALITY & VIRTUALITY WORKSHOP 26 July 2012 WELCOME Colin Blair Chief Executive Officer Standards Australia 26 July 2012 INTRODUCTIONS AND FORUM OBJECTIVES Damian Fisher Senior National Sector
More informationMapping Your Success Staying Current on Standards Under the EU Approach
Mapping Your Success Staying Current on Standards Under the EU Approach Overview What is a Standard? Why use Standards? EU Harmonized Standards what does it mean? EU Standards Harmonization Process Annex
More informationDraft IMCO Report on the future of European standardisation (2010/20515(INI)) ANEC summary and four proposals for amendments
European Association for the Co-ordination of Consumer Representation in Standardisation, AISBL Av. de Tervueren 32, box 27 B-1040 Brussels, Belgium - phone +32-2-743 24 70 - fax +32-2-706 54 30 e-mail:
More informationParticipating in International Standardization
Participating in International Standardization Participating in International Standardization Introduction 1 1. What is ISO? 2 A mature organization 2 Truly international and regional 2 ISO s management
More informationStakeholder Involvement Policy
Stakeholder Involvement Policy EUnetHTA Joint Action 2010-2012 Reference: EUnetHTA Joint Action 2010-2012, Stakeholder Involvement Policy, October 2010 1 1. Objective of the document This document provides
More informationISO INTERNATIONAL STANDARD. Road vehicles Electrical and electronic equipment for a supply voltage of 42 V Electrical loads
INTERNATIONAL STANDARD ISO 21848 First edition 2005-04-15 Road vehicles Electrical and electronic equipment for a supply voltage of 42 V Electrical loads Véhicules routiers Équipement électrique et électronique
More informationVademecum on European Standardisation
EUROPEAN COMMISSION ENTERPRISE DIRECTORATE-GENERAL Single Market : regulatory environment, standardisation and New Approach Standardisation Vademecum on European Standardisation Part II European Standardisation
More informationActivities of PTB in the field of legal metrology
Activities of PTB in the field of legal metrology European requirements to measuring instruments New German measurement and verification law Revision of EN 45501 Dr.-Ing. Dorothea Knopf, department Mass
More informationERAC 1206/16 MI/evt 1 DGG 3 C
EUROPEAN UNION EUROPEAN RESEARCH AREA AND INNOVATION COMMITTEE ERAC Secretariat Brussels, 4 May 2016 (OR. en) ERAC 1206/16 NOTE From: To: Subject: ERAC Secretariat ERAC delegations Mandate of the Standing
More informationERAC 1204/17 MI/evt 1 DGG 3 C
EUROPEAN UNION EUROPEAN RESEARCH AREA AND INNOVATION COMMITTEE ERAC Secretariat Brussels, 9 June 2017 (OR. en) ERAC 1204/17 NOTE From: To: Subject: ERAC Secretariat ERAC delegations Mandate of the Standing
More informationDRAFT AGENDA ANSI CONSUMER INTEREST FORUM (CIF) WEBEX MEETING TUESDAY, MAY 1, :30 PM TO 3:30 PM (EASTERN)
CIF 18-010 APRIL 23, 2018 DRAFT AGENDA ANSI CONSUMER INTEREST FORUM (CIF) WEBEX MEETING TUESDAY, MAY 1, 2018 2:30 PM TO 3:30 PM (EASTERN) Join WebEx meeting When it's time, start your meeting. Meeting
More informationTraffic Management System status, fault and quality standards
Introduction PUBLIC CALL FOR TENDER PROJECT TEAM EXPERTS for the execution of the work called for in the proposed Specific Agreement SA/CEN/GROW/EFTA/546/2016-08 Traffic Management System status, fault
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15613 First edition 2004-06-15 Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test Descriptif et qualification
More informationBT N 8703 (Draft Resolution BT C103/2011) Issue date : Target Date : BT - TECHNICAL BOARD 1 T O D E C I D E 2 S U B J E C T :
BT N 8703 (Draft Resolution BT C103/2011) Issue date : 2011-08-03 Target Date : 2011-11-01 BT - TECHNICAL BOARD 1 T O D E C I D E 2 S U B J E C T : Creation of a new Project Committee on "Health risk assessment
More informationISO INTERNATIONAL STANDARD. Thermal spraying Coatings for protection against corrosion and oxidation at elevated temperatures
INTERNATIONAL STANDARD ISO 17834 First edition 2003-12-01 Thermal spraying Coatings for protection against corrosion and oxidation at elevated temperatures Projection thermique Revêtements de protection
More informationDevelopment of International Standards
Development of International Standards July, 2009 Jae-Kyun EOM, Professor (Convenor of ISO TC51 WG 2, WG 8) Dept. of Industrial and Systems Eng., Myongji College Director of Korea Institute of Pallet and
More informationGuide 3: Guidelines to assist members of standards committees in preparing user-oriented European Standards
Guide 3: 2008 Guidelines to assist members of standards committees in preparing user-oriented European Standards Welcome to IFAN online www.ifan.org IFAN SECRETARIAT c/o ISO Central Secretariat 1, ch.
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15610 First edition 2003-10-01 Specification and qualification of welding procedures for metallic materials Qualification based on tested welding consumables Descriptif et qualification
More informationCirculation date: Closing date for voting: Proposer GERMANY
PROPOSAL FOR A NEW FIELD OF TECHNICAL ACTIVITY Circulation date: Closing date for voting: Proposer GERMANY Reference number (to be given by Central Secretariat) ISO/TS/P 249 A proposal for a new field
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 28004 First edition 2007-10-15 Security management systems for the supply chain Guidelines for the implementation of ISO 28000 Systèmes de management de la sûreté pour la chaîne
More information