Material Identity Product Name: Maxim 1K Seam Sealer Quick-n-Firm Product Numbers: Product Use: Seam Sealer

Size: px

Start display at page:

Download "Material Identity Product Name: Maxim 1K Seam Sealer Quick-n-Firm Product Numbers: Product Use: Seam Sealer"

Bruno Wood
5 years ago
Views:

1 Date Page: 1 of 6 SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Material Identity Product Name: Maxim 1K Seam Sealer Quick-n-Firm Product Numbers: Product Use: Seam Sealer Company Emergency Telephone Numbers: Fibre Glass-Evercoat CHEMTREC: a Division of Illinois Tool Works Inc. CANUTEC: Cornell Road Cincinnati, Ohio USA Phone: Prepared By: Safety Department SECTION 2. COMPOSITION / INFORMATION ON INGREDIENTS Ingredient(s) CAS Number EINECS Number % (by weight) Inert Fillers Proprietary Proprietary (Non-Hazardous) Xylene SECTION 3. HAZARDS IDENTIFICATION ***EMERGENCY OVERVIEW*** WARNING! May cause eye, nose and skin irritation. Acute Effects (Short Term): Eye: may burn and irritate eyes and mucus membranes. Skin: may cause dermatitis and defatting of the skin. Swallowing: harmful or fatal if swallowed. Inhalation: may cause central nervous system depression, inebriation followed by headache and nausea. In severe cases dizziness, convulsions and unconsciousness. Anorexia and nervousness may persist for several months following Acute overexposure. Chronic Effects of Overexposure (Long Term): Cancer Information: carcinogen: no Xylene: The substance may have effects on the central nervous system, resulting in decreased learning ability.

2 Date Page: 2 of 6 Primary Route(s) of Entry: eye contact, skin contact, inhalation, skin absorption, ingestion. SECTION 4. FIRST AID MEASURES Eyes: Skin: Swallowing: Inhalation: In case of eye contact, immediately flush eyes with running water for a minimum of 15 minutes. If irritation persists obtain medical attention immediately. Wash thoroughly with soap and water. Remove contaminated clothing. If irritation persists, get medical attention. If swallowed, do not induce vomiting. Call physician at once. If inhaled, remove affected person to fresh air. If breathing is difficult, give oxygen. Get medical attention immediately. SECTION 5. FIRE FIGHTING MEASURES Flash Point: 79 F /26 C (xylene) Explosive Limit: Lower: 1 Upper: 7 Autoignition Temperature: 867 F (xylene) OSHA Flammability Class: Flammable Liquid Class IC Hazardous Products of Combustion: smoke, normal combustion products. Fire and Explosion Hazards: none known Extinguishing Media: NFPA class b extinguishers (co2, foam (co2, foam, dry chemical) and self contained breathing apparatus Fire Fighting Instructions: water spray may be ineffective but may be used to cool closed containers. if water is used, use fog nozzles. *NFPA Rating: Health - 2, Flammability - 3, Reactivity - 0 SECTION 6. ACCIDENTAL RELEASE MEASURES In Case of Spill: Use personal protective equipment as described in (section 8). Absorb spill with inert material and place in a chemical waste container. Obey relevant local, state, provincial and federal laws and regulations. Do not contaminate any lakes, streams, ponds, groundwater, or soil. SECTION 7. HANDLING AND STORAGE Handling: keep material away from heat, spark and open flame. Keep out of the reach of children. Read product label and observe all precautions before use. Keep container closed when not in use.

3 Date Page: 3 of 6 Storage: Keep in a cool, dry, well-ventilated place. Do not store in open or unlabeled containers, use with adequate ventilation. Do not store above 120F. Containers should be grounded when pouring. Avoid free fall of liquids. Do not cut, braze or weld. SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Eye Protection: Skin Protection: Chemical splash goggles in compliance with OSHA regulations are recommended. Protective gloves and proper clothing should be worn to prevent skin contact. Gloves must be impervious to solvents. Respiratory Protection: Use a NIOSH approved respirator designed to remove particulate matter and organic solvent vapors. Engineering Controls: Provide sufficient mechanical (general and/or local exhaust) ventilation to maintain exposure below acceptable limits. Explosion-proof ventilation system is acceptable. Exposure Guidelines: Hazardous Ingredients CAS Number OSHA PEL/TWA ACGIH TLV Xylene ppm 100 ppm Mppcf- millions of particles per cubic foot of air N/E-Not Established SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Boiling Point: F Vapor Density: N/A Specific Gravity / 1.37 Percent Volatiles by Density: lbs/gal Volume: Evaporation Rate: Slower than butyl Physical State: Paste acetate Melting Point: N/A ph: N/A Odor: N/A Solubility: N/A Vapor Pressure: F / 20 C Appearance: White Octanol/Water Partition Coefficient: N/A

4 Date Page: 4 of 6 VOC (as packagedless exempts and water): Percent Solids by weight as packaged: VHAP Content by weight as packaged: 2.3 lbs/gal or 275 g/l VOC (as applied*- 2%by wt hardenerless exempts and water): 80.0 % Percent Solids by weight as applied* - 2 % by wt hardener N/E VHAP Content by weight as applied* - 2 % by weight hardener 2.3 lbs/gal or 275 g/l 80.0% *NOTE: The applied VOC and VHAP Content is lower than the packaged VOC and VHAP Content. N/E SECTION 10. STABILITY AND REACTIVITY Hazardous Polymerization: this product is stable and hazardous polymerization will Not occur. Chemical Stability: Stable under normal handling conditions Incompatibility: avoid strong oxidizing agents. Avoid all sources of ignition. Vapors are heavier Than air and may travel a considerable distance to an ignition Source and flashback SECTION 11. TOXICOLOGICAL INFORMATION Acute Toxicity Data: Ingredient CAS # LD 50 Oral-Rat LC 50 Inhalation-Rat Xylene ,300 mg/kg 5,000 ppm/4h N/E-Not Established Carcinogenicity: see Section 3 Mutagenicity: not available Teratogenicity: not available SECTION 12. ECOLOGICAL INFORMATION Ecotoxicity: none SECTION 13. DISPOSAL CONSIDERATION RCRA Hazardous Waste: This material as supplied, if discarded,

5 Date Page: 5 of 6 would be regulated as a hazardous waste under RCRA (40 CFR 261). Do not incinerate. Depressurize container. Dispose of in accordance with applicable federal, state, and local regulations. RCRA Hazard Class: This material would be regulated as EPA Hazardous Waste Number D001 based on the characteristic of ignitability. SECTION 14. TRANSPORT INFORMATION DOT Description: The DOT Classification for shipping is dependant on quantity, type of packaging (a kit may include other components), or method of shipment. SECTION 15. REGULATORY INFORMATION US Federal Regulations TSCA (Toxic Substances Control Act) Status TSCA (USA) The intentional ingredients of this product are listed. CERCLA RQ - 40 CFR 302.4(a) Component RQ Xylene 100 SARA Title III: Section 302- Extremely Hazardous Substances None SARA Title III: Section 313- Toxic Chemical List Component CAS Number Percentage Xylene % EPA Hazardous Air Pollutants (HAPS) 40 CFR 63 Component CAS Number Percentage None International Regulations EINECS (Europe) DSL (Canada) WHMIS Classification Health Hazard: D2B, D2A (Other Toxic Effects) Physical Hazard: B2 (Flammable) State and Local Regulations California Proposition 65: This product contains the following chemical(s) known to the state of California to cause cancer. NONE This product contains the following chemical(s) known to the state of California to cause birth defects or reproductive harm. NONE

6 Date Page: 6 of 6 SECTION 16. OTHER INFORMATION HMIS Rating: Health 2, Flammability -3, Reactivity - 0 Key- 0=Least, 1=Slight, 2=Moderate, 3=Serious, 4=Extreme, *=Chronic Effects Other Precautions for Use: Additional Information may be obtained by calling the Evercoat MSDS Hotline at NOTICE: The information accumulated herein is believed to be correct as of the date issued from sources, which are believed to be accurate and reliable. Since it is not possible to anticipate all circumstances of use, recipients are advised to confirm, in advance of need, that the information is current, applicable and suitable to their circumstances.

MATERIAL SAFETY DATA SHEET Date Prepared: 10/28/05 Page: 1 of 6 SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET Date Prepared: 10/28/05 Page: 1 of 6 SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Date Prepared: 10/28/05 Page: 1 of 6 SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Material Identity Product Name: Product Numbers: 100595 Product Use: vinyl repair Company Emergency Telephone