SAFETY DATA SHEET. This product has no classification under CLP.

Transcription

1 Page: 1 Compilation date: 03/12/2013 Revision No: 2 Section 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name: Product code: TUNO 1.2. Relevant identified uses of the substance or mixture and uses advised against 1.3. Details of the supplier of the safety data sheet Company name: Rustins Ltd Waterloo Road Cricklewood London NW2 7TX United Kingdom Tel: +44 (0) Fax: +44 (0) rustins@rustins.co.uk 1.4. Emergency telephone number Section 2: Hazards identification 2.1. Classification of the substance or mixture Classification under CLP: This product has no classification under CLP Label elements Label elements under CLP: Precautionary statements: P102: Keep out of reach of children. P262: Do not get in eyes, on skin, or on clothing. P270: Do not eat, drink or smoke when using this product. P : IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P : IF ON SKIN: Wash with plenty of soap and water. P : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P : IF ON CLOTHING: rinse immediately contaminated clothing and skin with plenty of water before removing clothes. P : In case of fire: Use carbon dioxide for extinction. P501: Dispose of contents/container to hazardous or special waste collection point.

2 Page: Other hazards PBT: This product is not identified as a PBT substance. Section 3: Composition/information on ingredients 3.1. Substances Chemical identity: Contains: Pure Tung Oil Section 4: First aid measures 4.1. Description of first aid measures Remove all contaminated clothes and footwear immediately unless stuck to skin. Bathe the eye with running water for 15 minutes. Consult a doctor. Do not induce vomiting. Wash out mouth with water. Not applicable Most important symptoms and effects, both acute and delayed There may be mild irritation at the site of contact. There may be irritation and redness Indication of any immediate medical attention and special treatment needed Section 5: Fire-fighting measures 5.1. Extinguishing media Extinguishing media: Carbon dioxide. Alcohol or polymer foam. Do not use water Special hazards arising from the substance or mixture Exposure hazards: In combustion emits toxic fumes of carbon dioxide / carbon monoxide Advice for fire-fighters Section 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures 6.2. Environmental precautions Environmental precautions: Contain the spillage using bunding Methods and material for containment and cleaning up 6.4. Reference to other sections

3 Page: 3 Section 7: Handling and storage 7.1. Precautions for safe handling 7.2. Conditions for safe storage, including any incompatibilities Storage conditions: Store in cool, well ventilated area. Avoid contact with copper and copper containing alloys as these may cause discoluration of the oil Specific end use(s) Section 8: Exposure controls/personal protection 8.1. Control parameters Workplace exposure limits: 8.1. DNEL/PNEC Values DNEL / PNEC 8.2. Exposure controls Engineering measures: Respiratory protection: Hand protection: Eye protection: Skin protection: Ensure lighting and electrical equipment are not a source of ignition. Respiratory protection not required. Protective gloves. Safety glasses. Protective clothing. Section 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties State: Liquid Colour: Milky plus colour range Odour: Slight and characteristic. Oxidising: Non-oxidising (by EC criteria) Also soluble in: Aromatic and aliphatic hydrocarbon solvents. Viscosity: Viscous Kinematic viscosity: 1.8@deg25C Autoflammability C: Over.350 deg C Relative density: 0.94@15.5deg C 9.2. Other information Other information: Section 10: Stability and reactivity Reactivity Chemical stability Chemical stability: Stable under normal conditions.

4 Page: Possibility of hazardous reactions Conditions to avoid Conditions to avoid: Direct sunlight. Sources of ignition Incompatible materials Materials to avoid: Copper Hazardous decomposition products Haz. decomp. products: In combustion emits toxic fumes of carbon dioxide / carbon monoxide. Section 11: Toxicological information Information on toxicological effects Toxicity values: Symptoms / routes of exposure There may be mild irritation at the site of contact. There may be irritation and redness. Section 12: Ecological information Toxicity Ecotoxicity values: Persistence and degradability Persistence and degradability: Biodegradable Bioaccumulative potential Mobility in soil Results of PBT and vpvb assessment PBT identification: This product is not identified as a PBT substance Other adverse effects Section 13: Disposal considerations Waste treatment methods Disposal operations: NB: Transfer to a suitable container and arrange for collection by specialised disposal company. The user's attention is drawn to the possible existence of regional or national regulations regarding disposal.

5 Page: 5 Section 14: Transport information Transport class: This product does not require a classification for transport. Section 15: Regulatory information Safety, health and environmental regulations/legislation specific for the substance or mixture Chemical Safety Assessment Section 16: Other information Other information Other information: Legal disclaimer: This safety data sheet is prepared in accordance with Commission Regulation (EU) No 453/2010. * indicates text in the SDS which has changed since the last revision. Even after washing the rags must never be crumpled into a ball but spread out and disposed of. Use synthetic fibre cloths whree possible as natural fibres, especially cotton, increase the chances of spontaneous combustion. This data sheet provides guidance on health, safety and environmental aspects of the product and shoud not be construed as any guarantee of technical performance or suitability for particular applications. As the specific conditions of use of the product are outside the supplier's control, the user is responsible for ensuring that the requirements of relevant legislation are complied with. [final page]