Hazchem Code COCAMIDE DEA - - GLYCOL STEARATE - - SODIUM CHLORIDE DL-ALPHA-TOCOPHERYL ACETATE

Size: px

Start display at page:

Download "Hazchem Code COCAMIDE DEA - - GLYCOL STEARATE - - SODIUM CHLORIDE DL-ALPHA-TOCOPHERYL ACETATE"

Myra Hamilton
6 years ago
Views:

1 1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Supplier name Address Telephone (02) Fax (02) Emergency Web site Synonym(s) Use(s) DIVERSEY AUSTRALIA PTY. LIMITED 29 Chifley St, Smithfield, NSW, 2164, AUSTRALIA (24 hrs) X500ML SOFT CARE DERMAWASH ALOE VERA HAND WASH 2X5L LIQUID HAND WASH SDS date 13 January HAZARDS IDENTIFICATION NOT CLASSIFIED AS HAZARDOUS ACCORDING TO SAFE WORK AUSTRALIA CRITERIA Risk Phrases None allocated Safety Phrases None allocated NOT CLASSIFIED AS A DANGEROUS GOOD BY THE CRITERIA OF THE ADG CODE UN Number Transport Hazard Class Packing Group Hazchem Code 3. COMPOSITION/ INFORMATION ON INGREDIENTS Ingredient CAS Number EC Number Content 2-METHYL-4-ISOTHIAZOLIN-3-ONE to 0.2% NON HAZARDOUS INGREDIENTS Not Available Not Available >60% SODIUM LAURETH SULPHATE to 15% ALOE EXTRACT to 5% COCAMIDE DEA to 5% GLYCOL STEARATE to 5% SODIUM CHLORIDE to 2% DL-ALPHA-TOCOPHERYL ACETATE to 1% FRAGRANCE(S) to 0.3% EDTA DISODIUM to 0.1% 4. FIRST AID MEASURES Eye If in eyes, hold eyelids apart and flush continuously with running water. Continue flushing until Page 1 of 5

2 Inhalation Skin Ingestion Advice to doctor First aid facilities advised to stop by a Poisons Information Centre, a doctor, or for at least 15 minutes. Due to product form / nature of use, an inhalation hazard is not anticipated. If an irritation or rash develops, gently flush affected areas with water and discontinue use. For advice, contact a Poison Information Centre on (Australia Wide) or a doctor (at once). Treat symptomatically. Eye wash facilities should be available. 5. FIRE FIGHTING MEASURES Flammability Fire and explosion Extinguishing Hazchem code Non flammable. May evolve toxic gases if strongly heated. No fire or explosion hazard exists. Use an extinguishing agent suitable for the surrounding fire. 6. ACCIDENTAL RELEASE MEASURES Personal precautions Environmental precautions Methods of cleaning up References Wear Personal Protective Equipment (PPE) as detailed in section 8 of the SDS. Prevent product from entering drains and waterways. If spilt (bulk), mop up area. CAUTION: Spill site may be slippery. See Sections 8 and 13 for exposure controls and disposal. 7. STORAGE AND HANDLING Storage Handling Store in a cool, dry, well ventilated area, removed from foodstuffs. Ensure containers are adequately labelled, protected from physical damage and sealed when not in use. Keep separate from acids. No special precautions are normally required when handling this product. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Exposure standards Ingredient Reference TWA STEL ppm mg/m³ ppm mg/m³ Stearates SWA (AUS) Biological limits Engineering controls No biological limit allocated. No special precautions are normally required when handling this product. PPE Eye / Face Hands Body Respiratory 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance WHITE CREAM Odour SLIGHT ODOUR Flammability NON FLAMMABLE Flash point Boiling point Melting point Evaporation rate ph 5.5 Page 2 of 5

3 Vapour density Specific gravity Solubility (water) Vapour pressure Upper explosion limit Lower explosion limit Explosive properties Oxidising properties % Volatiles (Approximately) SOLUBLE 10. STABILITY AND REACTIVITY Chemical stability Conditions to avoid Material to avoid Hazardous Decomposition Products Hazardous Reactions Stable under recommended conditions of storage. Avoid heat, sparks, open flames and other ignition sources. Compatible with most commonly used materials. May evolve toxic gases if heated to decomposition. Hazardous polymerization is not expected to occur. 11. TOXICOLOGICAL INFORMATION Health Hazard Summary Eye Inhalation Skin Ingestion Under normal conditions of use, adverse health effects are not anticipated. Contact may result in mild irritation, lacrimation and redness. Direct contact may result in irritation, lacrimation and conjunctivitis. Due to the low vapour pressure, an inhalation hazard is not anticipated with normal use. Prolonged or repeated contact may result in mild irritation. Some individuals may experience allergic reaction. Ingestion of large quantities may result in nausea, vomiting and gastrointestinal irritation. With large doses, ingestion may result in nausea, vomiting and gastrointestinal irritation. Toxicity data SODIUM CHLORIDE ( ) LC50 (inhalation) > mg/m³/1 hour (rat) LD50 (ingestion) 3000 mg/kg (rat) LD50 (intraperitoneal) 2602 mg/kg (mouse) LD50 (intravenous) 645 mg/kg (mouse) LD50 (skin) > mg/kg (rabbit) LD50 (subcutaneous) 3000 mg/kg (mouse) LDLo (ingestion) 8000 mg/kg (rabbit) LDLo (intravenous) 300 mg/kg (guinea pig) LDLo (subcutaneous) 2160 mg/kg (guinea pig) TDLo (ingestion) mg/kg (human) EDTA DISODIUM ( ) LD50 (ingestion) LD50 (intraperitoneal) LD50 (intravenous) 2000 mg/kg (rat) 260 mg/kg (mouse) 47 mg/kg (rabbit) 12. ECOLOGICAL INFORMATION Toxicity Persistence and degradability Bioaccumulative potential Mobility in soil Other adverse effects Page 3 of 5

4 13. DISPOSAL CONSIDERATIONS Waste disposal Legislation No special precautions are required for the disposal of this product. Dispose of in accordance with relevant local legislation. 14. TRANSPORT INFORMATION NOT CLASSIFIED AS A DANGEROUS GOOD BY THE CRITERIA OF THE ADG CODE, IMDG OR IATA LAND TRANSPORT (ADG) SEA TRANSPORT (IMDG / IMO) AIR TRANSPORT (IATA / ICAO) UN Number Proper Shipping Name Transport Hazard Class Packing Group Environmental hazards Special precautions for user No information provided Hazchem code 15. REGULATORY INFORMATION Poison schedule Inventory Listing(s) A poison schedule number has not been allocated to this product using the criteria in the Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP). AUSTRALIA: AICS (Australian Inventory of Chemical Substances) All components are listed on AICS, or are exempt. 16. OTHER INFORMATION Additional information PERSONAL PROTECTIVE EQUIPMENT GUIDELINES: The recommendation for protective equipment contained within this report is provided as a guide only. Factors such as method of application, working environment, quantity used, product concentration and the availability of engineering controls should be considered before final selection of personal protective equipment is made. HEALTH EFFECTS FROM EXPOSURE: It should be noted that the effects from exposure to this product will depend on several factors including: frequency and duration of use; quantity used; effectiveness of control measures; protective equipment used and method of application. Given that it is impractical to prepare a ChemAlert report which would encompass all possible scenarios, it is anticipated that users will assess the risks and apply control methods where appropriate. Page 4 of 5

5 Abbreviations ACGIH CAS # CNS EC No. GHS IARC LC50 LD50 mg/m³ OEL ph ppm STEL STOT-RE STOT-SE SUSMP SWA TLV TWA American Conference of Governmental Industrial Hygienists Chemical Abstract Service number - used to uniquely identify chemical compounds Central Nervous System EC No - European Community Number Globally Harmonized System International Agency for Research on Cancer Lethal Concentration, 50% / Median Lethal Concentration Lethal Dose, 50% / Median Lethal Dose Milligrams per Cubic Metre Occupational Exposure Limit relates to hydrogen ion concentration using a scale of 0 (high acidic) to 14 (highly alkaline). Parts Per Million Short-Term Exposure Limit Specific target organ toxicity (repeated exposure) Specific target organ toxicity (single exposure) Standard for the Uniform Scheduling of Medicines and Poisons Safe Work Australia Threshold Limit Value Time Weighted Average Revision history Revision Description Standard SDS Review Initial SDS creation Report status This document has been compiled by RMT on behalf of the manufacturer, importer or supplier of the product and serves as their Safety Data Sheet ('SDS'). It is based on information concerning the product which has been provided to RMT by the manufacturer, importer or supplier or obtained from third party sources and is believed to represent the current state of knowledge as to the appropriate safety and handling precautions for the product at the time of issue. Further clarification regarding any aspect of the product should be obtained directly from the manufacturer, importer or supplier. While RMT has taken all due care to include accurate and up-to-date information in this SDS, it does not provide any warranty as to accuracy or completeness. As far as lawfully possible, RMT accepts no liability for any loss, injury or damage (including consequential loss) which may be suffered or incurred by any person as a consequence of their reliance on the information contained in this SDS. Prepared by Risk Management Technologies 5 Ventnor Ave, West Perth Western Australia 6005 Phone: Fax: info@rmt.com.au Web: Revision: SDS Date: January 2015 End of SDS Page 5 of 5

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION 3. COMPOSITION/ INFORMATION ON INGREDIENTS 4. FIRST AID MEASURES

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Supplier name DIVERSEY AUSTRALIA PTY. LIMITED Address 29 Chifley St, Smithfield, NSW, 2164, AUSTRALIA Telephone (02) 9757 0300 Fax (02) 9725 5767 Emergency