SAFETY DATA SHEET. Do not breathe gas/fumes/vapour/spray (where applicable). Subsidiary Risk(s) Ingredient Identification Classification Content

Size: px

Start display at page:

Download "SAFETY DATA SHEET. Do not breathe gas/fumes/vapour/spray (where applicable). Subsidiary Risk(s) Ingredient Identification Classification Content"

Shanon Campbell
6 years ago
Views:

1 SAFETY DATA SHEET Product Name 1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Supplier Name OSMOSE (AUSTRALIA) PTY LTD Address Cafpirco Road, Mount Gambier, SA, AUSTRALIA, 5290 Telephone (08) Fax (08) Emergency Web Site Synonym(s) BIFENTHRIN 80SC Use(s) CONCENTRATE GLUE LINE INSECTICIDE TIMBER PRESERVATIVE SDS Date 17 May HAZARDS IDENTIFICATION CLASSIFIED AS HAZARDOUS ACCORDING TO SAFE WORK AUSTRALIA CRITERIA RISK PHRASES R20/22 Harmful by inhalation and if swallowed. SAFETY PHRASES S2 Keep out of reach of children. S13 Keep away from food, drink and animal feeding stuffs. S23 Do not breathe gas/fumes/vapour/spray (where applicable). CLASSIFIED AS A DANGEROUS GOOD (IN ACCORDANCE WITH IMDG ONLY) UN Number Packing Group DG Class Subsidiary Risk(s) 3. COMPOSITION/ INFORMATION ON INGREDIENTS Ingredient Identification Classification Content BIFENTHRIN CAS: T;R25 8% EC: NON HAZARDOUS INGREDIENTS Not Available Not Available >60% PROPYLENE GLYCOL (PROPANE-1,2-DIOL) CAS: Not Available 1-10% EC: FIRST AID MEASURES Eye Inhalation Skin Ingestion If in eyes, hold eyelids apart and flush continuously with running water. Continue flushing until advised to stop by a Poisons Information Centre, a doctor, or for at least 15 minutes. If inhaled, remove from contaminated area. Apply artificial respiration if not breathing. If on skin or clothing, remove any contaminated clothing at once, and wash skin thoroughly with soap and water. See a doctor if irritation persists. For advice, contact a Poison Information Centre on (Australia Wide) or a doctor (at once). Page 1 of 5

Advice to Doctor First Aid Facilities Bifenthrin the active ingredient in this product is a synthetic pyrethroid insecticide. The product has moderate oral toxicity and produces minimal irritation.

It has been reported that a topical application of Vitamin E cream has therapeutic value in reducing skin irritation, associated with skin contact with pyrethroid insecticides.

Fire and Explosion Extinguishing Treat as per requirements for surrounding fires. Evacuate area and contact emergency services. Remain upwind and notify those downwind of hazard.

2 Advice to Doctor First Aid Facilities Bifenthrin the active ingredient in this product is a synthetic pyrethroid insecticide. The product has moderate oral toxicity and produces minimal irritation. After removal from exposure treatment is symptomatic and supportive. Digestible fats, oils, alcohol and milk products increase absorption and should be avoided. It has been reported that a topical application of Vitamin E cream has therapeutic value in reducing skin irritation, associated with skin contact with pyrethroid insecticides. Eye wash facilities and safety shower are recommended. 5. FIRE FIGHTING MEASURES Flammability Non flammable. May evolve toxic gases (carbon oxides, hydrocarbons) when heated to decomposition. Fire and Explosion Extinguishing Treat as per requirements for surrounding fires. Evacuate area and contact emergency services. Remain upwind and notify those downwind of hazard. Wear full protective equipment including Self Contained Breathing Apparatus (SCBA) when combating fire. Use waterfog to cool intact containers and nearby storage areas. Prevent contamination of drains or waterways. 6. ACCIDENTAL RELEASE MEASURES Spillage Contact emergency services where appropriate. Use personal protective equipment. Clear area of all unprotected personnel. Ventilate area where possible. Contain spillage, then cover / absorb spill with non-combustible absorbent material (vermiculite, sand, or similar), collect and place in suitable containers for disposal. 7. STORAGE AND HANDLING Storage Handling Store in a cool, dry, well ventilated area, removed from oxidising agents, acids, seeds, fertilizer, heat or ignition sources and foodstuffs. Ensure containers are adequately labelled, protected from physical damage and sealed when not in use. Large storage areas should have appropriate ventilation systems. Non corrosive- compatible with aluminium, HDPE, glass and phenolic-lined steel containers. Before use carefully read the product label. Use of safe work practices are recommended to avoid eye or skin contact and inhalation. Observe good personal hygiene, including washing hands before eating. Prohibit eating, drinking and smoking in contaminated areas. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Exposure Standards Ingredient Reference TWA STEL ppm mg/m³ ppm mg/m³ Propane-1,2-diol (particulates only) SWA (AUS) Propane-1,2-diol (total vapour & particulates) SWA (AUS) Biological Limits Engineering Controls No biological limit allocated. Avoid inhalation. Use in well ventilated areas. PPE Eye / Face Hands Body Respiratory Wear splash-proof goggles. Wear PVC or rubber gloves. If spraying, wear full-length PVC or full-length rubber gloves. Wear coveralls. Where an inhalation risk exists, wear a Type A (Organic vapour) respirator. At high vapour levels, wear Self Contained Breathing Apparatus (SCBA) or an Air-line respirator. If spraying, wear Full-face Type A-Class P3 (Organic gases/vapours and Particulate) respirator. Page 2 of 5

3 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance BEIGE TO WHITE LIQUID Odour SLIGHT ODOUR Flammability NON FLAMMABLE Flash point NOT RELEVANT Boiling point 100 C (Approximately) Melting point < 0 C Evaporation rate AS FOR WATER ph Vapour density Specific gravity Solubility (water) DISPERSIBLE Vapour pressure 18 mm 20 C (Water) Upper explosion limit NOT RELEVANT Lower explosion limit NOT RELEVANT Autoignition temperature Decomposition temperature Viscosity Partition coefficient % Volatiles > 60 % (Water) 10. STABILITY AND REACTIVITY Chemical Stability Conditions to Avoid Material to Avoid Hazardous Decomposition Products Hazardous Reactions Stable under recommended conditions of storage. Avoid heat, sparks, open flames and other ignition sources. Incompatible with oxidising agents (eg. hypochlorites) and acids (eg. nitric acid). May evolve toxic gases (carbon oxides, hydrocarbons) when heated to decomposition. Polymerization will not occur. 11. TOXICOLOGICAL INFORMATION Health Hazard Summary Eye Inhalation Skin Ingestion Potential Health Effects: Studies with laboratory animals have shown this product to be harmful if swallowed or inhaled. Ingestion of large doses of bifenthrin by laboratory animals produced signs of toxicity which included clonic convulsions, tremors, and bloody nasal discharge. Chronic: No data available on this formulation. In studies with laboratory animals, the active ingredient (bifenthrin) did not cause reproductive toxicity or teratogenicity. Tremors were associated with repeated exposure of dogs, rats, rabbits, and mice to bifenthrin. The overall results from a battery of genotoxicity studies indicate that bifenthrin is not considered to be genotoxic. Repeated over-exposure to propylene glycol may cause central nervous system effects, destruction of red blood cells and kidney damage. Irritant. Contact may result in irritation, lacrimation, pain and redness. The product is harmful by inhalation. Acute Inhalation LC50 > mg/l/hr. This product has a low dermal toxicity. The dermal LD50 (rabbit) > 2000 mg/kg. The product is harmful if swallowed; the Acute Oral LD50 (rat) = 632 mg/kg. Page 3 of 5

4 12. ECOLOGICAL INFORMATION Environment Ecotoxicity Persistence/Degradability Mobility Hazardous to the environment. This product may be hazardous to the environment. Limited information was available at the time of this review. Limited information was available at the time of this review. 13. DISPOSAL CONSIDERATIONS Waste Disposal Legislation For small amounts absorb with sand, vermiculite or similar and dispose of to an approved landfill site only. Contact the manufacturer for additional information if larger amounts are involved. Triple rinse (or preferably pressure rinse) containers before disposal. Add rinsings to spray tank. Dispose of in accordance with relevant local legislation. 14. TRANSPORT INFORMATION CLASSIFIED AS A DANGEROUS GOOD (IN ACCORDANCE WITH IMDG ONLY) LAND TRANSPORT (ADG) SEA TRANSPORT (IMDG / IMO) AIR TRANSPORT (IATA / ICAO) UN Number Proper Shipping Name 3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. DG Class/ Division Subsidiary Risk(s) Packing Group 9 III 15. REGULATORY INFORMATION Poison Schedule Inventory Listing(s) Classified as a Schedule 6 (S6) Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP). AUSTRALIA: AICS (Australian Inventory of Chemical Substances) All components are listed on AICS, or are exempt. 16. OTHER INFORMATION Additional Information RESPIRATORS: In general the use of respirators should be limited and engineering controls employed to avoid exposure. If respiratory equipment must be worn ensure correct respirator selection and training is undertaken. Remember that some respirators may be extremely uncomfortable when used for long periods. The use of air powered or air supplied respirators should be considered where prolonged or repeated use is necessary. PERSONAL PROTECTIVE EQUIPMENT GUIDELINES: The recommendation for protective equipment contained within this ChemAlert report is provided as a guide only. Factors such as method of application, working environment, quantity used, product concentration and the availability of engineering controls should be considered before final selection of personal protective equipment is made. HEALTH EFFECTS FROM EXPOSURE: It should be noted that the effects from exposure to this product will depend on several factors including: frequency and duration of use; quantity used; effectiveness of control measures; protective equipment used and method of application. Given that it is impractical to prepare a ChemAlert report which would encompass all possible scenarios, it is anticipated that users will assess the risks and apply control methods where appropriate. Page 4 of 5

5 Abbreviations ACGIH CAS # CNS EC No. GHS IARC mg/m³ PEL ph ppm REACH STOT-RE STOT-SE SUSMP TLV TWA/OEL American Conference of Governmental Industrial Hygienists Chemical Abstract Service number - used to uniquely identify chemical compounds Central Nervous System EC No - European Community Number Globally Harmonized System International Agency for Research on Cancer Milligrams per Cubic Metre Permissible Exposure Limit relates to hydrogen ion concentration using a scale of 0 (high acidic) to 14 (highly alkaline). Parts Per Million Regulation on Registration, Evaluation, Authorisation and Restriction of Chemicals Specific target organ toxicity (repeated exposure) Specific target organ toxicity (single exposure) Standard for the Uniform Scheduling of Medicines and Poisons Threshold Limit Value Time Weighted Average or Occupational Exposure Limit Revision History Revision 1.0 Description Initial SDS Creation Standard SDS Review. Standard SDS Review. Report Status This document has been compiled by RMT on behalf of the manufacturer of the product and serves as the manufacturer's Safety Data Sheet ('SDS'). It is based on information concerning the product which has been provided to RMT by the manufacturer or obtained from third party sources and is believed to represent the current state of knowledge as to the appropriate safety and handling precautions for the product at the time of issue. Further clarification regarding any aspect of the product should be obtained directly from the manufacturer. While RMT has taken all due care to include accurate and up-to-date information in this SDS, it does not provide any warranty as to accuracy or completeness. As far as lawfully possible, RMT accepts no liability for any loss, injury or damage (including consequential loss) which may be suffered or incurred by any person as a consequence of their reliance on the information contained in this SDS. Prepared By Risk Management Technologies 5 Ventnor Ave, West Perth Western Australia 6005 Phone: Fax: info@rmt.com.au Web: Revision: SDS Date: 1 17 May 2012 End of SDS Page 5 of 5

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION 3. COMPOSITION/ INFORMATION ON INGREDIENTS 4. FIRST AID MEASURES

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Supplier name DIVERSEY AUSTRALIA PTY. LIMITED Address 29 Chifley St, Smithfield, NSW, 2164, AUSTRALIA Telephone (02) 9757 0300 Fax (02) 9725 5767 Emergency