Solaire Premium Dark COMPOSITION/INFORMATION ON INGREDIENTS

Transcription

1 1 of 5 1 PRODUCT AND COMPANY IDENTIFICATION Manufacturer Ste 5, 32 Essington Street Grovedale, VICT 3216 AU Contact: Phone: Fax: Web: Adam Taylor adam@solaire.com.au Product Name: Revision Date: MSDS Number: CAS Number: Product Code: Product Use: 6/20/2012 SSSPD1 Cosmetic - Sunless Tanning Solution 2 Route of Entry: Target Organs: Inhalation: Skin Contact: Eye Contact: Ingestion: HAZARDS IDENTIFICATION Ingestion None Use of nose plugs or filters by customers recommended. Do not inhale. Use of masks by technicians recommended. Do not spray on mucous membranes. Non-irritant for skin, non-sensitizer. Do not spray on mucous membranes. Do not spray in eyes. Can cause irritation, Symptoms include mild stinging, tearing, redness and swelling of eyes. not available 3 COMPOSITION/INFORMATION ON INGREDIENTS Ingredients: This formulation contains only ingredients that are considered non-hazardous as used. Glycerine, Firmaderm (Skin Firming), Vitamin Complex (A,C & E), Polysorbate 20, AstraCranTM, AquaxylTM, Panthenol (Vitamin B5), Sorbitol, Fragrance/Odor Control, Phenethyl Alcohol, Caprylyl Glycol, Citric Acid, FD&C Red #40, Red #33, Green #5 and Yellow #5.

2 4 FIRST AID MEASURES 2 of 5 Inhalation: Skin Contact: Eye Contact: Ingestion: Inhalation: If breathing is difficult, remove to fresh air or give oxygen. If irritation occurs, wash with soap and water. Get medical attention if irritation continues. Some individuals may have skin sensitivities and should not use this product. Patch testing is recommended. Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water. Cold water may be used. Get medical attention if irritation continues. Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician immediately. 5 FIRE FIGHTING MEASURES Flammability: Flash Point: Flash Point Method: Burning Rate: Autoignition Temp: LEL: UEL: Use of water to extinguish fire is acceptable Flash Point: Flash Point Method: Burning Rate: Autoignition Temperature: LEL: UEL: Flammability Classification: Not Flammable 6 ACCIDENTAL RELEASE MEASURES Small spill and leak: Dilute with water and mop up, or absorb with an inert dry material and place in appropriate waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements. Large spill and leak: Absorb with an inert material and put the spilled material in an appropriate waste disposal. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system. Dispose of according to local and regional authority requirements.

3 7 HANDLING AND STORAGE 3 of 5 Handling Precautions: Storage Requirements: No restrictions Keep container tightly closed. Store at room temperature or cooler. Keep product out of direct light. 8 EXPOSURE CONTROLS/PERSONAL PROTECTION Personal Protective Equip: Eyes: Safety glasses for technicians. Respiratory: Technician frequently applying product should wear mask covering nose and mouth if satisfactory exhaust ventilation is not available. Use of nose plugs or filters by customers recommended. Hands: Latex gloves or equivalent to prevent staining of hands through frequent application Feet: 9 Appearance: Physical State: Odor Threshold: Particle Size: Spec Grav./Density: Viscosity: Sat. Vap. Concentrat. Boiling Point: Vapor Pressure: ph: Evap. Rate: Molecular weight: PHYSICAL AND CHEMICAL PROPERTIES Brown Liquid liquid Odor: Molecular Formula: Solubility: Softening Point: Percent Volatile: Heat Value: Lowest known = to water at 212 F Freezing/Melting Pt.: highest known = to water at room temperatu Octanol: 4 to 6.6 Vapor Density: VOC: Bulk Density: slightly scented Miscible in water Lowest known = to water at 31.8 F highest known = to water at room temperatu 10 STABILITY AND REACTIVITY Stability: Conditions to Avoid: Materials to Avoid: Hazardous Decomposition: Hazardous Polymerization: The product is stable under normal conditions. Avoid heat. Product will become less effectiive with improper storage and color shifts may occur. Oxidizing and reducing agents and alkalis. Metal containers. Will not occur 11 TOXICOLOGICAL INFORMATION Acute Toxicity: Oral: Not determined Dermal: Not determined Inhalation: Not determined Skin Irritation: Not determined Eye Irritation: Not determined Sensitization: Not determined Chronic Toxicity: Not determined

4 Carcinogenicity: Not determined 4 of 5 12 ECOLOGICAL INFORMATION No data 13 DISPOSAL CONSIDERATIONS Waste must be disposed of in accordance with federal, state, and local enviromental control regualtions 14 United States IMDG Code LATA-DGR Class TRANSPORT INFORMATION

5 15 REGULATORY INFORMATION COMPONENT / (CAS/PERC) / CODES No regulatory issues REGULATORY KEY DESCRIPTIONS PA = PA Right-To-Know List of Hazardous Substances 5 of 5 CERCLA = Superfund clean up substance MASS = MA Massachusetts Hazardous Substances List NJHS = NJ Right-to-Know Hazardous Substances NRC = Nationally Recognized Carcinogens PROP65 = CA Prop 65 SARA313 = SARA 313 Title III Toxic Chemicals TOXICRCRA = RCRA Toxic Hazardous Wastes (U-List) TXHWL = TX Hazardous Waste List HAP = Hazardous Air Pollutants OSHAWAC = OSHA Workplace Air Contaminants TXAIR = TX Air Contaminants with Health Effects Screening Level CSWHS = Clean Water Act Hazardous substances 16 OTHER INFORMATION Disclaimer: Although reasonable care has been taken in the preparation of this document, we extend no warranties and make no representation as to the accuracy or completeness of the information contained herein, and assume no responsibility regarding the suitability of this information for the user's intended purpose or for the consequences of its use. Each individual should make a determination as to the suitability of the information for their particualr purpose(s).