Technology: A multi-compression chamber comprising a starter motor and air intake turbine draws air into a housing and pressurizes the air.

Transcription

1

2

3 The present invention is a Air Powered Electricity Generating System. The system utilizes electrical energy input to produce a constant flow of air that is compressed into pneumatic energy that is transformed into mechanical energy to produce electrical energy. This is accomplished with the help of an electrical starting motor and Air intake Turbines that draw ambient air into a housing for the system. The ambient air is pressurized and pushed into a Jet-Propulsion Corridor by the Air Intake Turbines. In the Jet-Propulsion Corridor, jet nozzles create pneumatic energy that is directed to an Electricity- Generating Turbine Corridor. There, shaft mounted Micro-compression Turbines having a sail configuration rotate and create additional pneumatic energy by collecting and further compressing the incoming Jot-Propulsion Corridor airflow. The compressed air causes the Micro-compression Turbine to rotate and transfer mechanical energy to a generator through a rotating shaft. The generator converts torque output into electricity. Excess air is recycled back into the system while some air is released back into the environment through decompression vents to alleviate pressure in the system. Once the system begins to generate power, the starter motor electricity demand is reduced to maintain constant rotation of the Air intake Turbine. Overall, the energy input required to start and maintain a constant flow of wind is less than the energy output of the combined forces of wind, pneumatic, and mechanical energy. Illustrates a cross-sectional view of an electricity-generating system embodying features of the present invention for an Air Powered Electricity Generating System

4 Technology: A pneumatic turbine system generates electricity utilizing electrical energy input to produce a constant flow of air that is compressed into pneumatic energy which is transformed into mechanical energy to produce electrical energy so that overall energy output resulting from the combined forces of wind, pneumatic, electrical, and mechanical energy is greater than electrical energy input. A multi-compression chamber comprising a starter motor and air intake turbine draws air into a housing and pressurizes the air. A jet propulsion corridor further pressurizes air utilizing nozzles where air is transferred to an electricity-generating turbine corridor having micro-compression turbines mounted on a shall that is connected to a stabilizing motor and an electric generator. The micro-compression turbines further compress the air and transfers mechanical energy to a generator. The housing redirects excess air back into the system.

5 Major components of H.E.R and Operating System 1- Power Cell 2- Wind Turbine 3- Compression Chamber 4- Induction Motors 5- Generators A- The Power Cell gives a kick start to the internal components of H.E.R for 2 to 3 minutes and within 2/3 minutes the Plant comes into complete Generation Mode and than the power cell will cut off, the Power cell is connected with a special aluminum wheel which 15/16000 RPM and keep charging the power cell pack on 24/7/365 days long the plant remains operation. The power cell pack are installed in accordance to required power for internal components of the plant. B- When power cell starts the system than the Wind Turbine intakes the atmospheric air and propels it to 180/200 Miles per hour, the propelled air goes through the compression chambers and strikes on the propellers mounted on top/side of the generators and Generators rotates it self clock wise and with the clock wise rotation and rotational excitation the generator generates the energy. The power cell provides DC power for internal parts and the out put from the plant remains as per the choice of the customer/ AC/DC/ V or 11 KV

6 What is Power Cell? - By patent design it is firm technical approval of the Cogar that when any Unit will have the Power Cell Battery than it will operate entirely independent. - All units of H.E.R to be sold will be having Power cell Batteries so what ever power is required to operate the internal Parts of H.E.R is given by Power cell Batteries. - Power cell gives a kick start to H.E.R unit and it remains operative for 2 to 3 minutes and during these 2 or 3 minutes the complete unit of H.E.R comes into a complete generation mode and the Power Cell detaches itself and the H.E.R unit keeps generating. - When the Power Cell detaches it self than the axillary power required by the internal parts is generated extra by the system and the generated power is in DC and the net delivered power is in AC or DC what ever required. - Let us say that 01 MW unit of H.E.R but internally the 01 MW unit is 1150 kw the 150 KW unit extra generated are consumed by the Turbine, Induction Motors, and other internal parts. -The power cell are installed in each unit of H/E/R keeping in mind the internal power required to start H.E.R unit

7 TECHNOLOGICAL ADVANTAGES OF THE HYDRO-ELECTRIC REACTOR The Hydro-Electric Reactor power plant can produce electricity at less than 1~3 cent (One ~Three U.S. cent) per kilowatt hour. It is more affordable than solar energy and it does not depend on sunlight to operate. It is more reliable than windmill energy because it can operate 24 hours a day and 7 days a week, all year round. It does not depend on the wind to operate. It uses only air to create electricity. Air goes into the system and only air comes out of the power plant, back into the atmosphere. There are no harmful emissions, whatsoever. It does not use any fuel to generate electricity in commercial quantities. It can replace all coal, nuclear, natural gas and other fossil fuel-based power plants and engines within 30 years, worldwide. It can eliminate the current greenhouse gas effect, restore the ozone layer and put an end to global warming. The technology has no daily operating costs because it is self-sustaining.

8 TECHNOLOGICAL ADVANTAGES OF THE HYDRO-ELECTRIC REACTOR It is designed to operate efficiently for 100 years with occasional replacement of parts. It is easy to maintain with limited downtime all year round. It is easy to install anywhere, indoors or outdoors. It can provide independent electricity to residential, commercial and industrial buildings without connection to any external power grid. It does not discharge any toxic chemicals into the atmosphere, ground or seas that will require expensive clean-up. There are no drawbacks whatsoever. It can produce clean and free energy for Electric Power Plants, Automobile Electric Engines, Marine Craft Engines and Aircraft Propulsion Engines, with unlimited miles range which will put an end to the current worldwide oil dependence. It can generate and add over 1,000,000 megawatts of clean, reliable and sustainable green energy every year, to all countries around the world. The technology can produce electricity at the lowest price than any other powergenerating system currently being used anywhere in the world because it uses only air to generate electricity; and AIR is FREE, UNLIMITED and AVAILABLE in every country on EARTH.

9 ECONOMIC ADVANTAGES OF THE HYDRO-ELECTRIC REACTOR The free, clean and renewable energy generated by the Hydro-Electric Reactor technology can bring down the cost of generating power for electricity and transportation by about 90% worldwide. This will enable the cost of manufacturing goods and services to be drastically reduced and also the cost of transporting goods and services, including food, will be negligible. The end result will be a dramatic reduction in inflation, automatic stimulation of economic activity in terms of increased productivity, high employment rate and resurgence in national prosperity worldwide. The huge amount of money saved from importing oil, natural gas, coal, uranium and other expensive energy products, which range from millions to billions of dollars annually, can be re-invested into each country's economy which can lead to exponential acceleration of national wealth. The threat of global warming and its catastrophic impact on human economic growth can be eliminated by reversing the carbon footprints created by all fossilfuel emissions, thereby restoring the protective ozone layer and rejuvenating the health of the planet. This will greatly benefit all nations around the world. The current global recession and the heavy burden of unemployment fostered on many national governments can be relieved by the extensive manufacturing, distributing and servicing of products created by the Hydro-Electric Reactor technology which can provide employment, each year, for 1,000,000 people in the U.S.A. and 10,000,000 worldwide, over the next 10 years.

10 ECONOMIC ADVANTAGES OF THE HYDRO-ELECTRIC REACTOR It can double the annual profits of any electric utility company or transportation and delivery company, worldwide. All existing fossil fuel-based power plants, automobile engines, marine-craft engines and aircraft propulsion engines can be replaced with Hydro-Electric Reactor clean energy engines within 30 years worldwide, which will effectively bring an end to the current global oil dependence and eliminate the inevitable energy crisis. The all-electric engines being developed will replace the present gasoline-based internal-combustion engines within a few years and ensure great savings to individuals and institutions worldwide because all vehicle owners will no longer need to buy gasoline to drive their vehicles. It is projected that most of the world's oil reserves will be depleted within the next 30 years. The Hydro-Electric Reactor technology will ensure that the world's economy will not grind to a halt as a result. There are 100 products being developed for mass-production based on the Hydro-Electric Reactor technology.

11 APPLICATIONS

12 The company proposes to manufacture 40 (Forty) standard models of the Hydro-Electric Reactor Power Plants, from 5 kilowatts to 20 Megawatts, for residential, commercial and industrial customers.

13

14 ALL HYDRO-ELECTRIC REACTOR POWER PLANTS WILL BE HOUSED WITHIN SOUND-PROOF CONTAINERS. 8ft W x 28 ft L x 8 ft H

15 SAY GOODBYE TO FOSSIL FUELS, OIL DEPENDENCE AND GLOBAL WARMING!

16

17 1MW, HYDRO-ELECTRIC REACTOR POWER GENERATOR 1000 KILOWATTS Reactor Components (No need Fuel): Electricity Generator- Manufactured by General Electric Electric Motors- Manufactured by Marathon Electric Variable Frequency Drive- Manufactured by Fuji Electric Pillow-Block Bearings- Manufactured by Baldor Engineering Air-Intake Turbines- Manufactured by General Electric Velocity Propeller- Manufactured by General Electric Mid-Point Nozzle- Manufactured by V&S Engineering Rear-End Nozzle- Manufactured by V&S Engineering Jet-Propulsion Corridor- Manufactured by V&S Engineering Pressurized Air Conduit- Manufactured by V&S Engineering Steel Shafts- Manufactured by V&S Engineering Generator Turbines- Manufactured by V&S Engineering Starter Battery- Manufactured by Tesla Steel Mesh- Manufactured by Custom Marine Blow-Back Barrier- Manufactured by Custom Marine Cables Gauges and Switches- Supplied by Eureka Bearings Company Sound-Proof Container- Manufactured by Custom Marine Electronic Control Panel- Manufactured by Siemens of Germany For 60 moths payment, expect 8 to 10 % annual financial charges. All models of Hydro Electric Reactors 1-50/60 hz 2-1 or 3 phase 3-110,220,380, 440 v 4-11 KV with additional price as per the capacity of H.E.R 5-01 MW Physical size is 8 x 28 ft x 8 ft height 6-01 MW sound level 65 dba 7- All models available in sound proof canopy with additional charge 8- Turbine from, GE, Hercules, Rolls Royce, Siemens, the manufacturer will decide which manufacturer they will choose for a certain size of unit. 9- Generator. Marathon Brand 10 Induction motors. US Motors Brand 11- Electrical parts. Fuji

18 Price & Payment Condition The export permission was given by US department of Commerce and Industry in last November 2014 and Patent was published in May last month. You can see operation unit of 250KW in Huntington Beach California and The prices are 5KW, $27, : 10KW, $41, : 20KW, $68,750.00, 30KW, $84, : 40KW, $101, : 50KW, $121, : 100KW, $212, : 500KW, $980,000,00 : 1MW, $2,750, : 3 MW. $5,968, All prices are FOB LAX Air Port or any Port in California USA on ILC Lump sum Payment Basis. 5KW, 10KW, 20KW, 30KW, 40KW, 50KW are not available on monthly payments for these 5KW, 10KW, 20KW, 30KW, 40KW, 50KW the following payments terms will apply Order # 1 5KW, 10KW, 20KW one each to be ordered together 1- Irrevocable Letter of credit for 150 days to BBN 2- In 30 days Cogar will ship one unit each of 5KW, 10KW, 20KW 3- BBN customers to use the one unit each of 5KW, 10KW, 20KW for 3 months and upon successful operation and generation of 5KW, 10KW, 20KW BBN Customers to release the ILC. Order # 2 30, 40, 50 KW One each to be ordered together 1- Irrevocable Letter of credit for 180 days to Cogar-BBN 2- In 30 days Cogar will ship one unit each of 30, 40,50 KW 3- BBN customers to use the one unit each of 30, 40, 50 KW for 4 months and upon successful operation and generation of 30, 40, 50 KW BBN Customers to release the ILC. Order # KW one unit 1- Irrevocable Letter of credit for 180 days to Cogar-BBN 2- In 30 days Cogar will ship one unit each of 100 KW 3- BBN customers to use the one unit each of 100 KW for 4 months and upon successful operation and generation of 100 KW BBN Customers to release the ILC. Order # 4 1MW or 3 MW 1- Irrevocable Letter of credit for 60 Months to Cogar. Ask quotation of 60 months. 2- In 90 days Cogar will ship one MW or 3 MW Units 3- BBN customers to use the one unit each of for 60 months and upon successful operation and generation of 30 days BBN customer to pay the equal monthly payment for 60 months. 4- Please Note that customer will only app 50 to 65 % of their Grid energy Bill what they are paying now. Please note that in H.E.R is one time cost and the energy cost is 1-3 cents of a US $ as O&M cost so no match with any Technology in the world. No land No Waste No Sun etc

19 The most attractive offer is given as below. 1- ZERO down Payment & ZERO Advance 2- Customer to pay every month equal payments 3- Customer to provide a revolving Bank Guarantee or Irrevocable Letter of Credit against 3 monthly payment amounts ( If a monthly payment is 50,000 $ than customer to issue a Bank Guarantee or Irrevocable Letter of Credit for 150,000 $) the Bank Guarantee or Irrevocable Letter of Credit to automatically renew itself every 80th day of the Bank Guarantee or Irrevocable Letter of Credit. 4- The customers can choose from 12 to 60 months payment. If you have a project, we can give you on a 10MW, 30MW, 50 MW IPP and upon your request, we will provide you all information related to IPP s such as, PPA, Power Generation License etc for 10MW ~ 1000MW. BBN-HER will also finance any IPP with a PPA signed and guarantee provided by any Government other that North Korea and Iran. Dimension : 3MW In 3 MW H.E.R, we will supply 3 x 1000 KWH units, each one MW unit will have 4 of 250 KW Turbines as this design will eliminate the 100 % failure chances as if one of 250 KW turbines may fail than the rest of 3 will be operational. Factory can give even one turbine of 1000 KWH, but they recommend to have 4x250 kw as one unit in one container of 10x 30 ft. The size for 01 MW is 10 ft Width x28 Length x9 height

20 PRODUCT WARRANTIES Factory provides the following warranties for its product-lines to our customers. 5-YEAR PRODUCT LIABILITY WARRANTY (COMPONENTS REPLACEMENT) This 5 year warranty covers all power plants product category and provides protection as follows: Any defective component part on a purchased power plant system will be replaced, free of charge to the customer within the 5 years duration. Any malfunctioning component part will be replaced with a new similar component, free of charge, to the customer, within 5 years from the date of purchase of the power plant system. Any component part supplied with the complete power plant system that does not fit perfectly shall be replaced with the correct size component, free of charge, within 5 years. 1-YEAR LIMITED PRODUCT WARRANTY (COMPLETE SYSTEM REPLACEMENT) This 1-year limited product warranty provides protection to the customer in the event that the entire power plant unit does not perform as specified, for example, where a 1 megawatt (1,000 Kilowatts) unit only generates 900 Kilowatts (with a shortfall of 100 kilowatts). The company will send its engineers and technicians to correct the problem and failure to fix it will entitle the customer to have the entire unit replaced with a brand new power plant of the same specified capacity within one calendar year. 30 DAY MONEY BACK GUARANTEE Upon purchase and installation of our power plant(s), customer can return any unit(s) within 30 days from the date of final installation if not completely satisfied with the product performance for a full refund of the purchase price. Note: All defective component parts or complete power plant units should be returned to factory at our expense.

21 Thank You!