SAFETY DATA SHEET. 1. Identification. 2. Hazard(s) identification. Skin corrosion/irritation. Serious eye damage/eye irritation

Transcription

1 SAFETY DATA SHEET Product identifier Other means of identification Recommended use Recommended restrictions CHEMWORLD ne. CORROSION INHIBITOR ne known. Manufacturer/Importer/Supplier/Distributor information Manufacturer 1. Identification Company name ChemWorld Address 885 Woodstock Rd. Ste Roswell, GA United States Telephone (800) Website Emergency phone number ChemTel Physical hazards Health hazards Label elements t classified. Skin corrosion/irritation 2. Hazard(s) identification Serious eye damage/eye irritation Category 2 Category 2 Signal word Hazard statement Precautionary statement Prevention Response Storage Disposal Hazard(s) not otherwise classified (HNOC) Supplemental information Warning Causes skin irritation. Causes serious eye irritation. Wash thoroughly after handling. Wear eye protection/face protection. Wear protective gloves. If on skin: Wash with plenty of water. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Store away from incompatible materials. Dispose of waste and residues in accordance with local authority requirements. ne known. ne. 3. Composition/information on ingredients Mixtures Chemical name Common name and synonyms CAS number % Sodium molybdate Potassium hydroxide <= 1 Other components below reportable levels *Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret. 1 / 6

2 Inhalation Skin contact Eye contact Ingestion Most important symptoms/effects, acute and delayed Indication of immediate medical attention and special treatment needed General information Suitable extinguishing media Unsuitable extinguishing media Specific hazards arising from the chemical Special protective equipment and precautions for firefighters Fire fighting equipment/instructions Specific methods General fire hazards Personal precautions, protective equipment and emergency procedures Methods and materials for containment and cleaning up 4. First-aid measures If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. Call a physician if symptoms develop or persist. Remove contaminated clothing. Rinse skin with water/shower. If skin irritation occurs: Get medical advice/attention. Wash contaminated clothing before reuse. Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists. Rinse mouth. If ingestion of a large amount does occur, call a poison control center immediately. Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision. Skin irritation. May cause redness and pain. Provide general supportive measures and treat symptomatically. Keep victim under observation. Symptoms may be delayed. Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves. 5. Fire-fighting measures Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2). Do not use water jet as an extinguisher, as this will spread the fire. During fire, gases hazardous to health may be formed. Self-contained breathing apparatus and full protective clothing must be worn in case of fire. Move containers from fire area if you can do so without risk. Use standard firefighting procedures and consider the hazards of other involved materials. unusual fire or explosion hazards noted. 6. Accidental release measures Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wear appropriate protective equipment and clothing during clean-up. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ensure adequate ventilation. Local authorities should be advised if significant spillages cannot be contained. For personal protection, see section 8 of the SDS. This product is miscible in water. Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Cover with plastic sheet to prevent spreading. Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water. Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination. Environmental precautions Precautions for safe handling Conditions for safe storage, including any incompatibilities Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS. Avoid discharge into drains, water courses or onto the ground. 7. Handling and storage Provide adequate ventilation. Avoid contact with eyes, skin, and clothing. Avoid prolonged exposure. Wear appropriate personal protective equipment. Observe good industrial hygiene practices. Use care in handling/storage. Store in original tightly closed container. Store away from incompatible materials (see Section 10 of the SDS). 2 / 6

3 8. Exposure controls/personal protection Occupational exposure limits US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR ) Components Type Value Sodium molybdate (CAS ) PEL 5 mg/m3 US. ACGIH Threshold Limit Values Components Type Value Form Potassium hydroxide (CAS ) Sodium molybdate (CAS ) Ceiling US. NIOSH: Pocket Guide to Chemical Hazards Components Type Potassium hydroxide (CAS ) Biological limit values Appropriate engineering controls 2 mg/m3 TWA 0.5 mg/m3 Respirable fraction. TWA Value biological exposure limits noted for the ingredient(s). 2 mg/m3 Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level. Eye wash facilities and emergency shower must be available when handling this product. Individual protection measures, such as personal protective equipment Wear safety glasses with side shields (or goggles). Eye/face protection Skin protection Hand protection Other Respiratory protection General hygiene considerations Wear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glove supplier. Wear appropriate chemical resistant clothing. In case of insufficient ventilation, wear suitable respiratory equipment. Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. Appearance Odor Physical state Form Color Odor threshold Liquid. Clear Liquid. Colorless ne. ph 11.0 Melting point/freezing point Initial boiling point and boiling range Flash point Evaporation rate Flammability (solid, gas) 9. Physical and chemical properties < 40 F (< 4.4 C) estimated > 212 F (> 100 C) estimated ne t applicable. Upper/lower flammability or explosive limits Flammability limit - lower (%) Flammability limit - upper (%) Explosive limit - lower (%) Explosive limit - upper (%) 3 / 6

4 Vapor pressure Vapor density Relative density Solubility(ies) Solubility (water) Partition coefficient (n-octanol/water) Auto-ignition temperature Decomposition temperature Viscosity Other information Density Explosive properties Oxidizing properties Percent volatile Specific gravity 1.13 < 1.0 mm Hg estimated Complete 9.39 lb/gal t explosive. t oxidizing. > 70 % estimated Reactivity Chemical stability Possibility of hazardous reactions Conditions to avoid Incompatible materials Hazardous decomposition products 10. Stability and reactivity The product is stable and non-reactive under normal conditions of use, storage and transport. Material is stable under normal conditions. dangerous reaction known under conditions of normal use. Contact with incompatible materials. Strong oxidizing agents. hazardous decomposition products are known. 11. Toxicological information Information on likely routes of exposure Inhalation Prolonged inhalation may be harmful. Skin contact Eye contact Ingestion Symptoms related to the physical, chemical and toxicological characteristics Information on toxicological effects Acute toxicity Skin corrosion/irritation Serious eye damage/eye irritation Respiratory or skin sensitization Respiratory sensitization Skin sensitization Germ cell mutagenicity Carcinogenicity Causes skin irritation. Causes serious eye irritation. Expected to be a low ingestion hazard. Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision. Skin irritation. May cause redness and pain. Causes skin irritation. Causes serious eye irritation. t a respiratory sensitizer. This product is not expected to cause skin sensitization. IARC Monographs. Overall Evaluation of Carcinogenicity data available to indicate product or any components present at greater than 0.1% are mutagenic or genotoxic. This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA. OSHA Specifically Regulated Substances (29 CFR ) US. National Toxicology Program (NTP) Report on Carcinogens Material name: CHEMWORLD / 6

5 Reproductive toxicity Specific target organ toxicity - single exposure Specific target organ toxicity - repeated exposure Aspiration hazard Chronic effects Ecotoxicity Persistence and degradability Bioaccumulative potential Mobility in soil Other adverse effects Disposal instructions Local disposal regulations Hazardous waste code Waste from residues / unused products Contaminated packaging This product is not expected to cause reproductive or developmental effects. t classified. t classified. t an aspiration hazard. Prolonged inhalation may be harmful. 12. Ecological information The product is not classified as environmentally hazardous. However, this does not exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment. data is available on the degradability of this product. data available. data available. other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this component. 13. Disposal considerations Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Dispose of contents/container in accordance with local/regional/national/international regulations. Dispose in accordance with all applicable regulations. The waste code should be assigned in discussion between the user, the producer and the waste disposal company. Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see: Disposal instructions). Since emptied containers may retain product residue, follow label warnings even after container is emptied. Empty containers should be taken to an approved waste handling site for recycling or disposal. DOT t regulated as dangerous goods. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code t established. 14. Transport information t regulated as dangerous goods. US federal regulations CERCLA Hazardous Substance List (40 CFR 302.4) SARA 304 Emergency release notification 15. Regulatory information This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR Listed. OSHA Specifically Regulated Substances (29 CFR ) Superfund Amendments and Reauthorization Act of 1986 (SARA) Hazard categories Immediate Hazard - Delayed Hazard - Fire Hazard - Pressure Hazard - Reactivity Hazard - SARA 302 Extremely hazardous substance SARA 311/312 Hazardous chemical 5 / 6

6 SARA 313 (TRI reporting) Other federal regulations Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR ) Safe Drinking Water Act (SDWA) US state regulations US. California Controlled Substances. CA Department of Justice (California Health and Safety Code Section 11100) US. Massachusetts RTK - Substance List US. New Jersey Worker and Community Right-to-Know Act US. Pennsylvania Worker and Community Right-to-Know Law US. Rhode Island RTK US. California Proposition 65 California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material is not known to contain any chemicals currently listed as carcinogens or reproductive toxins. International Inventories Country(s) or region Inventory name On inventory (yes/no)* Australia Australian Inventory of Chemical Substances (AICS) Canada Canada China Europe Europe Japan Korea New Zealand Philippines United States & Puerto Rico Domestic Substances List (DSL) n-domestic Substances List (NDSL) Inventory of Existing Chemical Substances in China (IECSC) European Inventory of Existing Commercial Chemical Substances (EINECS) European List of tified Chemical Substances (ELINCS) Inventory of Existing and New Chemical Substances (ENCS) Existing Chemicals List (ECL) New Zealand Inventory Philippine Inventory of Chemicals and Chemical Substances (PICCS) Toxic Substances Control Act (TSCA) Inventory *A "" indicates that all components of this product comply with the inventory requirements administered by the governing country(s) A "" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing country(s). Issue date Version # 01 Disclaimer 16. Other information, including date of preparation or last revision The manufacturer cannot anticipate all conditions under which this information and its product, or the products of other manufacturers in combination with its product, may be used. It is the user s responsibility to ensure safe conditions for handling, storage and disposal of the product, and to assume liability for loss, injury, damage or expense due to improper use. The information in the sheet was written based on the best knowledge and experience currently available. 6 / 6