Citation for published version (APA): Land, M. J. (2004). Workload control in job shops, grasping the tap s.n.

Transcription

1 University of Groningen Workload control in job shops, grasping the tap Land, Martin IMPORTANT NOTE: You are advised to consult the publisher's version (publisher's PDF) if you wish to cite from it. Please check the document version below. Document Version Publisher's PDF, also known as Version of record Publication date: 2004 Link to publication in University of Groningen/UMCG research database Citation for published version (APA): Land, M. J. (2004). Workload control in job shops, grasping the tap s.n. Copyright Other than for strictly personal use, it is not permitted to download or to forward/distribute the text or part of it without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license (like Creative Commons). Take-down policy If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim. Downloaded from the University of Groningen/UMCG research database (Pure): For technical reasons the number of authors shown on this cover page is limited to 10 maximum. Download date:

2 References Adam, D. 1988, "Die Eignung der belastungsorientierten Auftragsfreigabe für die Steurerung von Fertigungsprozessen mit diskontinuierlichem Materialfluss", Zeitschrift für Betriebswirtschaft, vol. 58, no. 1, pp Adam, D. 1989, "Probleme der belastungsorientierten Auftragsfreigabe", Zeitschrift für Betriebswirtschaft, vol. 59, pp Baker, K. R. 1974, Introduction to sequencing and scheduling. John Wiley & Sons Inc., USA. Baker, K. R. & Bertrand, J. W. M. 1981, "An investigation of due date assignment rules with constrained tightness", Journal of Operations Management, vol. 1, no. 3, pp Baker, K. R. & Kanet, J. J. 1983, "Job shop scheduling with modified operation duedates", Journal of Operations Management, vol. 4, no. 1, pp Baker, K. R. 1984, "Sequencing rules and due-date assignments in a job shop", Management Science, vol. 30, no. 9, pp Bakker, W. 1965, De levertijd in machinefabrieken, een oriënterend onderzoek (dissertation) Uitgeverij Waltman, Delft. Bechte, W. 1980, Steuerung der Durchlaufzeit durch belastungsorientierte Auftragsfreigabe bei Werkstattfertigung. VDI-Verlag (dissertation), Düsseldorf. Bechte, W. 1988, "Theory and practice of load-oriented manufacturing control", International Journal of Production Research, vol. 26, no. 3, pp Bechte, W. 1994, "Load-oriented manufacturing control just-in-time production for job shops", Production Planning & Control, vol. 5, no. 3, pp Bergamaschi, D., Cigolini, R., Perona, M., & Portioli, A. 1997, "Order review and release strategies in a job shop environment: a review and a classification", International Journal of Production Research, vol. 35, no. 2, pp Bertrand, J. W. M. & Wortmann, J. C. 1981, Production control and information systems for component-manufacturing shops. Elsevier Science Publishers B.V., North-Holland. Bertrand, J. W. M. 1983, "The effect of workload dependent due-dates on job shop performance", Management Science, vol. 29, no. 7, pp Bertrand, J. W. M. & Ooijen, H. P. G. v. 1991, "Flow rate flexibility in complex production departments", International Journal of Production Research, vol. 29, no. 4, pp Bertrand, J. W. M. & Ooijen, H. P. G. v. 2002, "Workload based order release and productivity: a missing link", Production Planning & Control, vol. 13, no. 7, pp References 227

3 Blackstone, J. H., Phillips, D. T., & Hogg, G. L. 1982, "A state-of-the-art survey of dispatching rules for manufacturing job shop operations", International Journal of Production Research, vol. 20, no. 1, pp Blazewicz, J., Domschke, W., & Pesch, E. 1996, "The job shop scheduling problem: conventional and new solution techniques", European Journal of Operational Research, vol. 93, pp Breithaupt, J.-W., Land, M. J., & Nyhuis, P. 2002, "The workload control concept: theory and pratical extensions of Load Oriented Order Release", Production Planning & Control, vol. 13, no. 7, pp Burmeister, M. 1997, Auslegung der Verbrauchssteuerung bei vernetzter Produktion. Forschritt-Berichte VDI, Reihe 8, Nr 658, Düsseldorf. Buzacott, J. A. & Shanthikumar, J. G. 1993, Stochastic Models of Manufacturing Systems. Prentice-Hall, Englewood Cliffs. Cheng, T. C. E. & Gupta, M. C. 1989, "Survey of scheduling research involving due date determination decisions", European Journal of Operational Research, vol. 38, no. 2, pp Christy, D. P. & Kanet, J. J. 1990, "Manufacturing systems with forbidden early shipment: implications for choice of scheduling rules", International Journal of Production Research, vol. 28, no. 1, pp Cigolini, R., Perona, M., & Portioli, A. 1998, "Comparison of order review and release techniques in a dynamic and uncertain job shop environment", International Journal of Production Research, vol. 36, no. 11, pp Cigolini, R. & Portioli Staudacher, A. 2002, "An experimental investigation on workload limiting methods within ORR policies in a job shop environment", Production Planning & Control, vol. 13, no. 7, pp Conway, R., Maxwell, W. L., & Miller, L. W. 1967, Theory of scheduling. Addison- Wesley Reading, Mass. Easton, F. F. & Moodie, D. R. 1999, "Pricing and lead time decisions for make-toorder firms with contingent orders", European Journal of Operational Research, vol. 116, pp Eilon, S. & Chowdhury, I. 1976, "Due dates in job shop scheduling", International Journal of Production Research, vol. 14, no. 2, pp Enns, S. T. 1994, "Job shop leadtime requirements under conditions of controlled delivery performance", European Journal of Operational Research, vol. 77, pp Enns, S. T. 1995, "An integrated system for controlling shop loading and work flow", International Journal of Production Research, vol. 33, no. 10, pp

4 Enns, S. T. & Costa, M. P. 2002, "The effectiveness of input control based on aggregate versus bottleneck work loads", Production Planning & Control, vol. 13, no. 7, pp Fandel, G., François, P., & Gubitz, J.-M. 1998, PPS- und integrierte betriebliche Softwaresysteme - Grundlagen, Methoden, Marktanalyse. Springer-Verlag, Berlin, Heidelberg, New York. Fowler, J. W., Hogg, G. L., & Mason, S. J. 2002, "Workload control in the semiconductor industry", Production Planning & Control, vol. 13, no. 7, pp Fredendall, L. D. & Melnyk, S. A. 1995, "Assessing the impact of reducing demand variance through improved planning on the performance of a dual resource constrained job shop", International Journal of Production Research, vol. 33, no. 6, pp Fry, T. D., Philipoom, P. R., & Blackstone, J. H. 1988, "A simulation study of processing time dispatching rules", Journal of Operations Management, vol. 7, no. 4, pp Glassey, C. R. & Resende, M. G. C. 1988, "Closed-loop job release control for VLSI circuit manufacturing", IEEE Transactions on Semiconductor Manufacturing, vol. 1, no. 1, pp Goldratt, E. M. & Cox, J. F. 1984, The Goal. North River Press, New York. Greiner, T. 1989, "Belastungsorientierte Auftragsfreigabe - nicht immer die beste Lösung", AV, vol. 26, no. 2, pp Hansmann, K.-W. 1993, "Capacity oriented production control for a job shop production", Preprints "Management and New Production Systems", EIASM, London, pp Haskose, A., Kingsman, B. G., & Worthington, D. 2002, "Modelling flow and jobbing shops as a queueing network for workload control", International Journal of Production Economics, vol. 78, pp Haskose, A., Kingsman, B. G., & Worthington, D. 2003, "Performance analysis of make-to-order manufacturing systems under different workload control regimes", International Journal of Production Economics (to appear). Häfner, H. 1992, Ein Warteschlangenansatz zur integrierten Produktionsplanung Physica-Verlag, Heidelberg. Hendry, L. C. & Kingsman, B. G. 1988, "A decision support system to manage shop floor throughput times in make-to-order companies", Preprints 5th International Working Seminar on Production Economics, Igls, Austria, vol. 32, no. 1, pp References 229

5 Hendry, L. C. 1989, "A decision support system to manage delivery and manufacturing lead times in make-to-order companies.", University of Lancaster, PhD dissertation. Hendry, L. C. & Kingsman, B. G. 1989, "Production planning systems and their applicability to make-to-order companies", European Journal of Operational Research, vol. 40, no. 1, pp Hendry, L. C. & Kingsman, B. G. 1991, "A decision support system for job release in make-to-order companies", International Journal of Operations & Production Management, vol. 11, no. 6, pp Hendry, L. C. & Kingsman, B. G. 1993, "Customer enquiry management: part of a hierarchical system to control lead times in make-to-order companies", Journal of Operational Research Society, vol. 44, no. 1, pp Hendry, L. C. & Wong, S. K. 1994, "Alternative order release mechanisms: a comparison by simulation", International Journal of Production Research, vol. 32, no. 12, pp Hendry, L. C., Kingsman, B. G., & Cheung, P. 1998, "The effect of workload control (WLC) on performance in make-to-order companies", Journal of Operations Management, vol. 16, no. 1, pp Henrich, P., Land, M. J., Gaalman, G. J. C., & Zee, D. J. v. d. 2003, "The effect of information on workload control," in One world? One view of OM? The challenges of integrating research & practise (vol 2), G. Spina et al., eds., S.G.E., Padova, pp Henrich, P., Land, M. J., & Gaalman, G. J. C. 2003, "Exploring applicability of the workload control concept", International Journal of Production Economics (to appear). Irastorza, J. C. & Deane, R. H. 1974, "A loading and balancing methodology for job shop control", AIIE Transactions, vol. 6, no. 4, pp Jain, A. S. & Meeran, S. 1999, "Deterministic job-shop scheduling: Past, present and future", European Journal of Operational Research, vol. 113, pp Jewell, W. S. 1976, "A simple proof of L = λ x W", Operations Research, vol. 15, no. 6, pp Kanet, J. J. & Christy, D. P. 1984, "Manufacturing systems with forbidden early order departure", International Journal of Production Research, vol. 22, no. 1, pp Kanet, J. J. 1988, "Load-limited order release in job scheduling systems", Journal of Operations Management, vol. 7, no. 3, pp Kingsman, B. G., Tatsiopoulos, I. P., & Hendry, L. C. 1989, "A structural methodology for managing manufacturing lead times in make-to-order companies", European Journal of Operational Research, vol. 40, pp

6 Kingsman, B. G., Worden, L., Hendry, L. C., Mercer, A., & Wilson, E. 1993, "Integrating marketing and production planning in make-to-order companies", International Journal of Production Economics, vol , pp Kingsman, B. G., Hendry, L. C., Mercer, A., & de Souza, A. A. 1996, "Responding to customer enquiries in make-to-order companies, Problems and solutions", International Journal of Production Economics, vol , pp Kingsman, B. G. 2000, "Modelling input-output workload control for dynamic capacity planning in production planning systems", International Journal of Production Economics, vol. 68, pp Kingsman, B. G. & Hendry, L. C. 2002, "The relative contribution of input and output controls on the performance of a workload control system in Make-To- Order companies", Production Planning & Control, vol. 13, no. 7, pp Knolmayer, G. 1991, "A widely acclaimed method of load-oriented job release and its conceptual deficiencies," in Modern production concepts, G. Fandel & G. Zäphel, eds., Springer Verlag, Berlin. Land, M. J. & Gaalman, G. J. C. 1994, "The choice of performance indicators for job shops," in Operations Strategy and Performance, K. W. Plattw, M. J. Gregory, & A. D. Neely, eds., Cambridge University Press, Cambridge, pp Land, M. J. & Gaalman, G. J. C. 1996a, "Workload control concepts in job shops: A critical assessment", International Journal of Production Economics, vol , pp Land, M. J. & Gaalman, G. J. C. 1996, "Towards simple and robust workload norms," in Proceedings of the workshop production planning and control, Mons, Belgium, pp Land, M. J. & Gaalman, G. J. C. 1998, "The performance of workload control concepts in job shops: Improving the release method", International Journal of Production Economics, vol , pp Law, A. M. & Kelton, W. D. 1991, Simulation modeling & analysis, 2 edn. McGraw- Hill, Singapore. Little, J. D. C. 1961, "A proof for the queuing formula: L = λ W", Operations Research, vol. 9, pp Melnyk, S. A. & Ragatz, G. L. 1988, "Order review/release and its impact on the shop floor", Production and Inventory Management Journal, vol. 29, no. 2, pp Melnyk, S. A. & Ragatz, G. L. 1989, "Order review/release: research issues and perspectives", International Journal of Production Research, vol. 27, no. 7, pp References 231

7 Melnyk, S. A., Ragatz, G. L., & Fredendall, L. D. 1991, "Load smoothing by the planning and order review/release systems: a simulation experiment", Journal of Operations Management, vol. 10, no. 4, pp Melnyk, S. A., Denzler, D. R., & Fredendall, L. D. 1992, "Variance control vs. dispatching efficiency", Production and Inventory Management Journal, vol. 3, no. 1992, pp Melnyk, S. A., Denzler, D. R., Magnan, G. L., & Fredendall, L. D. 1994, "An experimental model for investigating the sensitivity of job shop performance to job release time distribution parameters", Production and Operations Management, vol. 3, no. 1, pp Muda, S. & Hendry, L. C. 2002, "Developing a new world class model for small and medium sized make-to-order companies", International Journal of Production Economics, vol. 78, pp Nyhuis, P. 1991, Durchlauforientierte Losgrössenbestimmung. VDI Fortschritt- Berichte reihe 2, Nr.225, VDI Verlag, Düsseldorf. Nyhuis, P. 1992, "Logistische rationalisierungspotentiale erkennen und bewerten", Beitrag zum 9.östereichischen Logistik-Dialog, Wien. Nyhuis, P. & Wiendahl, H.-P. 1999, Logistische Kennlinien: Grundlagen, Werkzeuge und Anwendungen. Springer-Verlag, Berlin. Ooijen, H. P. G. v. 1996, Load-based work-order release and its effectiveness on delivery performance improvement. (dissertation) FEBO, Enschede. Ooijen, H. P. G. v. & Bertrand, J. W. M. 2003, "The effects of a simple arrival rate control policy on throughput and work-in-proces in production systems with workload dependent processing rates", International Journal of Production Economics, vol. 85, pp Oosterman, B. 1995, Een vergelijking van werklastbeheersing in verschillende productiesituaties. Unpublished Master Thesis, University of Groningen. Oosterman, B., Land, M. J., & Gaalman, G. J. C. 2000, "The influence of shop characteristics on workload control", International Journal of Production Economics, vol. 68, pp Panwalker, S. S. & Iskander, W. 1977, "A survey of scheduling rules", Operations Research, vol. 25, no. 1, pp Park, P. S. & Bobrowski, P. M. 1989, "Job release and labor flexibility in a dual resource constrained job shop", Journal of Operations Management, vol. 8, no. 3, pp Park, P. S. & Salegna, G. J. 1995, "Load smoothing with feedback in a bottleneck job shop", International Journal of Production Research, vol. 33, no. 6, pp

8 Perona, M. & Portioli, A. 1996, "An enhanced loading model for the probabilistic workload control under workload imbalance", Production Planning & Control, vol. 7, no. 1, pp Perona, M. & Portioli, A. 1998, "The impact of parameters setting in load oriented manufacturing control", International Journal of Production Economics, vol. 55, pp Philipoom, P. R. & Fry, T. D. 1992, "Capacity-based order review/release strategies to improve manufacturing performance", International Journal of Production Research, vol. 30, no. 11, pp Plossl, G. W. & Wight, O. W. 1971, "Capacity planning and control", Working paper presented at the APICS International Conference in St.Louis, Missouri. Plossl, G. W. 1988, "Throughput time control", International Journal of Production Research, vol. 26, no. 3, pp Ragatz, G. L. & Mabert, V. A. 1984, "A framework for the study of due date management in job shops", International Journal of Production Research, vol. 22, no. 4, pp Ramasesh, R. 1990, "Dynamic job shop scheduling: a survey of simulation research", Omega, vol. 18, no. 1, pp Riezebos, J., Korte, G. J., & Land, M. J. 2003, "Improving a practical DBR buffering approach using Workload Control", International Journal of Production Research, vol. 41, no. 4, pp Roderick, L. M., Phillips, D. T., & Hogg, G. L. 1992, "A comparison of order release strategies in production control systems", International Journal of Production Research, vol. 30, no. 3, pp Rohleder, T. R. & Scudder, G. D. 1993, "A comparison of order-release and dispatch rules for the dynamic weighted early/tardy problem", Production and Operations Management, vol. 2, no. 3, pp Salegna, G. J. & Park, P. S. 1996, "Workload smoothing in a bottleneck job shop", International Journal of Operations & Production Management, vol. 16, no. 1, pp Shimoyashiro, S., Isoda, K., & Awane, H. 1984, "Input scheduling and load balance control for a job shop", International Journal of Production Research, vol. 22, no. 4, pp Stidham Jr., S. 1972, "L = λ x W : a discounted analogue and a new proof", Operations Research, vol. 20, no. 6, pp Stidham Jr., S. 1974, "A last word on L = λ x W", Operations Research, vol. 22, no. 2, pp Tatsiopoulos, I. P. 1983, "A microcomputer-based interactive system for managing production and marketing in small component-manufacturing firms using a References 233

9 hierarchical backlog control and lead time management methodology", University of Lancaster, PhD dissertation. Tatsiopoulos, I. P. 1993, "Simplified production management software for the small manufacturing firm", Production Planning & Control, vol. 4, no. 1, pp Tobin, N. R., Mercer, A., & Kingsman, B. G. 1987, "A study of small subcontract and make-to-order firms in relation to quotation for orders", International Journal of Operations & Production Management, vol. 8, no. 6, pp Vig, M. M. & Dooley, K. J. 1993, "Mixing static and dynamic flowtime estimates for due-date assignment", Journal of Operations Management, vol. 11, no. 1, pp Wein, L. M. 1990, "Scheduling networks of queues: heavy traffic analysis of a twostation network with controllable inputs", Operations Research, vol. 38, no. 6, pp Wein, L. M. 1992, "Scheduling networks of queues: heavy traffic analysis of a multistation network with controllable inputs", Operations Research, vol. 40, no. 2, p. S312-S334. Wein, L. M. & Chevalier, P. B. 1992, "A broader view of the job-shop scheduling problem", Management Science, vol. 38, no. 7, pp Wiendahl, H.-P. 1987, Belastungsorientierte Fertigungssteuerung, Grundslagen, Verfahrensaufbau, Realisierung. Carl Hanser Verlag, München. Wiendahl, H.-P. & Springer, G. 1988, "Manufacturing process control on the basis of the input/output chart - a chance to improve the operational behaviour of automatic production systems", International Journal of Advanced Manufacturing Technology, vol. 3, no. 1, pp Wiendahl, H.-P. 1991, Anwendung der belastungsorientierten Fertigungssteuerung. Carl Hanser Verlag, München. Wiendahl, H.-P., Glässner, J., & Peterman, D. 1992, "Application of load-oriented manufacturing control in industry", Production Planning & Control, vol. 3, no. 2, pp Wiendahl, H.-P. (Ed.) 1993, Neue wege der PPS. Gmft-Verlag, München,. Wiendahl, H.-P. & Ullmann, W. 1993, "Logistics performance measurement of shop floor activities", Annals of the CIRP, vol. 42, no. 1, pp Wiendahl, H.-P. 1995, Load-oriented manufacturing control. Springer-Verlag, Berlin. Wiendahl, H.-P. & Nyhuis, P. 1996, "Logistic operating curves - a comprehensive method of rating logistic potentials," in Annals of the German Academic Society for Production Engineering, Hanser, München. Wiendahl, H.-P., Nyhuis, P., & Helms, K. 1998, "Durchlaufzeit/2 - Die Potentiale liegen auf der Hand", Werkstattstechnik, vol. 88, no. 4, pp

10 Wight, O. 1970, "Input/output control: a real handle on lead time", Production & Inventory Management, vol. 11, no. 3, pp Wisner, J. D. 1995, "A review of the order release policy research", International Journal of Operations & Production Management, vol. 15, no. 6, pp Zäpfel, G. & Missbauer, H. 1993, "Production planning and control (ppc) systems including load-oriented order release - problems and research perspectives", International Journal of Production Economics, vol. 30/31, pp References 235