MATTEL INC. Technical Report: (5215) / (5215) (A) November 03, 2015 Page 1 of 13

Transcription

1 CONSUER PRODUCTS SERVICES DIVISION ATTEL INC. Technical Report: (5215) / (5215) (A) Page 1 of 13 ALCO HON / ROSANNE CANUS STUDIO FUN INTERTIOL UNIT , ILLENNIU CITY 5 (AP) 418 KWUN TONG ROAD KWUN TONG HONG KONG RESULT: PASS Details of samples submitted on October 20, 2015: Sample Description: BARBIE SPY SQUAD WITH COPACT BOARD BOOK Vendor: STUDIO FUN INTERTIOL Sample Size: 10 anufacturer: N/A Style No(s): N/A Buyer: N/A SKN/SKU No.: N/A Labeled Age Grade: AGES 3 AND UP PO No.: N/A Appropriate Age Grade: OVER 3 YEARS OF AGE Item No.: N/A Client Specified Age NOT SPECIFIED Country of Origin: CHI Grade: Tested Age Grade: OVER 3 YEARS OF AGE Assortment No.: N/A UPC Code: Test Starting Date: OCTOBER 20, 2015 Test Finished Date: NOVEBER 03, 2015 Details of samples submitted on August 25, 2015: Sample Description: BARBIE SPY SQUAD WITH COPACT BOARD BOOK - DUY BOOK WITH PRODUCTION ACCESSORIES Vendor: STUDIO FUN INTERTIOL Sample Size: 12 anufacturer: N/A Style No(s): N/A Buyer: N/A SKN/SKU No.: N/A Labeled Age Grade: AGES 3 AND UP PO No.: N/A Appropriate Age Grade: N/A Item No.: N/A Client Specified Age OVER 3 YEARS OF AGE Country of Origin: CHI Grade: Tested Age Grade: OVER 3 YEARS OF AGE Assortment No.: N/A UPC Code: Country of Destination: US/ CADA Test Starting Date: AUGUST 25, 2015 Test Finished Date: SEPTEBER 07, 2015 Bureau Veritas Hong Kong Limited Kowloon Bay Office 1/F Pacific Trade Centre, 2 Kai Hing Road, Kowloon Bay, Kowloon, Hong Kong Tel: (852) Fax: (852) This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents.

2 EXECUTIVE SUARY: ATTEL INC. Page 2 of 13 The samples submitted on October 20, 2015 are as follow: The sample(s) the following requirement(s): The flammability requirements of 16 CFR (c)(6)(vi), "Flammable solid" (FHSA regulations). The labeling requirements of AST F963-11, Standard consumer safety specification for toy safety. The mechanical hazards requirements of AST F963-11, Standard consumer safety specification for toy safety. The mechanical hazards requirements of the tested sections of Canada Consumer Product Safety Act, Toys Regulations, SOR/ and Schedule 2. The cellulose nitrate requirements of Canada Toys Regulations, SOR/ , section 21. The function requirements of the client's testing program. The initial total heavy metals content analysis for soluble heavy metals content in surface coating requirements of AST F963-11, "Standard Consumer Safety Specification for Toy Safety," Section (2). The applicable heavy metals content requirements for surface coatings of the Canada Consumer Product Safety Act, Toys Regulations, SOR/ Sec. 23. The BBP, DBP & DEHP content requirements by composite testing of the Consumer Product Safety Improvement Act (CPSIA) of 2008 Sec. 108(a) Prohibition On Sale of Certain Products Containing Specified Phthalates. The DNOP, DIDP & DINP content requirements by composite testing of the Consumer Product Safety Improvement Act (CPSIA) of 2008 Sec. 108(b)(1) Prohibition On Sale of Certain Products Containing Specified Phthalates. The total lead content of 90ppm requirements of 16 CFR 1303, Ban of lead-containing paint and certain consumer products bearing lead-containing paint as mandated by Congress in section 101(f) of the Consumer Products Safety Improvement Act (CPSIA) of 2008, Public Law The heavy metals content in packaging requirements of odel Toxics Legislation of the Toxics in Packaging Clearinghouse, TPCH (formerly the Coalition of Northeastern Governors, CONEG). In lieu of testing and at the request of the client, the vendor provided a Letter of Certification which indicates the sample(s) was in compliance with the flame retardants requirement of the attel Corporate Product Integrity, QSOP , Flame Retardants, Revision H. The requirement of attel licensed requirements document for Toys for children over 3 years of age.

3 EXECUTIVE SUARY: ATTEL INC. Page 3 of 13 The samples submitted on October 20, 2015 are as follow: Note: The sample(s) was not evaluated to the Normal Use testing requirements specified in AST F963-11, Section 8.5. It is the responsibility of the manufacturer, vendor or distributor to conduct tests that will simulate normal use conditions. These tests shall ensure that hazards are not generated through normal wear and deterioration of the sample(s). These tests shall also simulate the normal play mode of the toy and to simulate the expected mode of use of the particular toy. The tests shall be conducted in an expected use environment. These normal use tests shall simulate the intended use of the toy based on its estimated lifetime. Note: According to the associated documents of Consumer Product Safety Improvement Act (CPSIA) of 2008, exemptions were granted to certain materials or products, such as natural materials / paper and similar materials / CYK process printing inks / metal & alloys / electronics devices components / ordinary books / dyed & undyed textiles. Therefore, the lead content analysis of some components was not conducted. Note: Note: According to AST F963-11, Standard consumer safety specification on toy safety, Annex A , exemption were granted to paper and paperboard. Therefore, the heavy metals content in substrate analysis of some components of AST F963-11, Section (2)(b) was not conducted. Based on visual evaluation and/or material breakdown received, there is no polyvinyl chloride (PVC) found in the samples submitted and thus the corresponding testing of the Canada Consumer Product Safety Act, Phthalates Regulations, SOR/ regarding to the restriction of use of certain phthalates content have not been conducted.

4 EXECUTIVE SUARY: ATTEL INC. Page 4 of 13 The test results of the samples submitted on August 25, 2015 as reported in Technical Report No. (5215) are as follow: The sample(s) the following requirement(s): The mechanical hazards requirements of 16 CFR 1500, Federal Hazardous Substances Act Regulations. The labeling requirements of AST F963-11, Standard consumer safety specification for toy safety. The mechanical hazards requirements of AST F963-11, Standard consumer safety specification for toy safety. The mechanical hazards requirements of the tested sections of Canada Consumer Product Safety Act, Toys Regulations, SOR/ and Schedule 2. The function requirements of the client's testing program. The requirement of attel licensed requirements document for Toys for children over 3 years of age. The soluble heavy metals content in surface coating requirements of AST F963-11, "Standard Consumer Safety Specification for Toy Safety," Section (2). The soluble heavy metals content in substrate requirements of AST F963-11, "Standard Consumer Safety Specification for Toy Safety," Section (2)(b). The BBP, DBP and DEHP content requirements of the Canada Consumer Product Safety Act with reference to the Hazardous Products Act, Phthalate Regulations, SOR/ The DNOP, DINP and DIDP content requirements of the Canada Consumer Product Safety Act with reference to the Hazardous Product Act, Phthalate Regulations, SOR/ The applicable heavy metals content requirements for surface coatings of the Canada Consumer Product Safety Act, Toys Regulations, SOR/ Sec. 23. The BBP, DBP & DEHP content requirements by composite testing of the Consumer Product Safety Improvement Act (CPSIA) of 2008 Sec. 108(a) Prohibition On Sale of Certain Products Containing Specified Phthalates. The DNOP, DIDP & DINP content requirements by composite testing of the Consumer Product Safety Improvement Act (CPSIA) of 2008 Sec. 108(b)(1) Prohibition On Sale of Certain Products Containing Specified Phthalates. The total lead content of 100ppm requirements by composite testing in substrate materials (Consumer Products Safety Improvement Act (CPSIA) of 2008). The total lead content of 90ppm requirements of 16 CFR 1303, Ban of lead-containing paint and certain consumer products bearing lead-containing paint as mandated by Congress in section 101(f) of the Consumer Products Safety Improvement Act (CPSIA) of 2008, Public Law In lieu of testing and at the request of the client, the vendor provided a Letter of Certification which indicates the sample(s) was in compliance with the flame retardants requirement of the attel Corporate Product Integrity, QSOP , Flame Retardants, Revision H.

5 EXECUTIVE SUARY: ATTEL INC. Page 5 of 13 The test results of the samples submitted on August 25, 2015 as reported in Technical Report No. (5215) are as follow: Note: The sample(s) was not evaluated to the Normal Use testing requirements specified in AST F963-11, Section 8.5. It is the responsibility of the manufacturer, vendor or distributor to conduct tests that will simulate normal use conditions. These tests shall ensure that hazards are not generated through normal wear and deterioration of the sample(s). These tests shall also simulate the normal play mode of the toy and to simulate the expected mode of use of the particular toy. The tests shall be conducted in an expected use environment. These normal use tests shall simulate the intended use of the toy based on its estimated lifetime. Note: According to the associated documents of Consumer Product Safety Improvement Act (CPSIA) of 2008, exemptions were granted to certain materials or products, such as natural materials / paper and similar materials / CYK process printing inks / metal & alloys / electronics devices components / ordinary books / dyed & undyed textiles. Therefore, the lead content analysis of some components was not conducted. Note: According to AST F963-11, Standard consumer safety specification on toy safety, Annex A , exemption were granted to paper and paperboard. Therefore, the heavy metals content in substrate analysis of some components of AST F963-11, Section (2)(b) was not conducted. BUREAU VERITAS HONG KONG LIITED KL/cc Lai Ka ing, Kent Director Toys and Juvenile Products Department

6 ATTEL INC. Page 6 of 13 PART 1 The samples submitted on October 20, 2015 are as follow: ATTEL LICENSED REQUIREENTS DOCUENT FOR Toys for Children Over 3 Years of Age Evaluation Citation/ethod Criteria Rating DOCUENTATION Documentation can be accepted for all -- ACCEPTANCE test requirements as outlined in the attel 3 rd Party Lab Engagement Document. HAZARD -- Action items from the Hazard Analysis -- ALYSIS QUALIFICATION OF DESIGN PRODUCT CLASSIFICATION NOT PERITTED LIST LABELING REQUIREENTS must be completed prior to testing -- Action items from the Qualification of Design must be completed prior to production start attel Quality Product atrix The 3rd Party lab shall verify the core/non-core and involvement level classification of the licensed consumer product and follow the process flow chart, as appropriate, to complete testing according to the attel Licensing Program. Lab to indicate the core/noncore and involvement level classification in the rating column. attel Quality Product atrix The 3rd Party lab shall verify that the licensed product is not present on the not-permitted list. If the product is found to be on the not-permitted list, testing should stop immediately and the attel Quality Engineer must be notified -- Licensee is only responsible to meet regulatory labeling requirements unless otherwise noted in this section. Labeling requirements mentioned or referred to in attel QSOPs can be omitted

7 ATTEL INC. Page 7 of 13 PART 1 ATTEL LICENSED REQUIREENTS DOCUENT FOR Toys for Children Over 3 Years of Age Evaluation Citation/ethod Criteria Rating AGE GRADING REGULATORY REQUIREENTS CPSC Age Determination Guidelines / attel Child Research Expert Industry, Union, Federal, and State requirements All products shall be tested according to either the appropriate age grade, as determined by 3 rd Party Test Lab, the labeled age grade, or attel specified age grade, whichever is most stringent. In the event the sample is not age labeled or attel has not specified an age grade, the 3 rd Party Test Lab will determine the appropriate age grade and test accordingly. Note: A developmental statement, weight limit, etc may replace an agegrade. If appropriate age-grade or attel agegrade is determined to be under 3 years of age, the 3 rd party lab must notify the attel Quality Engineer before any testing takes place. ust meet all requirements for country/countries of distribution as determined by a Third Party Test Lab. Refer to the 3 rd party lab engagement document to determine the appropriate level of requirements to be applied. GENERAL REQUIREENTS Rubber Latex -- Product and package must not contain natural rubber latex. Licensee can submit letter of guarantee to show compliance. edical Claims -- There must not be any medical claims without the accompanying FDA or equivalent approval Product and Package Information -- The following must be located on the product and package: Licensee name, Country of origin, Unique product identifier, Date code, Licensee address (package only) Labeled Age Grade: 3 and up Appropriate or attel Specified Age Grade: Tested Age Grade: Over 3 years

8 ATTEL INC. Page 8 of 13 PART 1 ATTEL LICENSED REQUIREENTS DOCUENT FOR Toys for Children Over 3 Years of Age Evaluation Citation/ethod Criteria Rating Consumer -- One time assemblies should not exceed Assemblies 89N (20lb)s of force. Repeated assemblies should not exceed 44.5 N (10lbs) of force. Claims Verification -- Any claims made on product, package, or instructions must be substantiated. Also includes pictures and images. Promotional edia Depictions Of Water Scenes QSOP 3451 Promotional edia QSOP 3452 Depictions of Wheel & Street Scenes Promotional edia QSOP Depiction of Unsafe/Inappropri ate Acts Toy Standard US - AST F963, Canada - Hazardous Products (Toys) Regulations ( C.R.C., c. 931), Polycarbonate Bisphenol A QSOP 3627 To provide requirements for promotional media content and provide guidelines for identifying unsafe or inappropriate acts for children in or near the bath or other bodies of water. Provide guidelines for evaluating promotional media for unsafe or inappropriate acts in accordance with global advertising codes. Promotional media must not depict unsafe or inappropriate acts Product must comply with one of the cited standards. Licensee can show conformance to any of the stated test methods. The following should not contain Bisphenol A. Omit section Accessible plastic portions of products for children 3 which are intended to be mouthed Accessible plastic food contact items intended for children 3 Flame Retardants QSOP 3614 A declaration of compliance must be obtained from licensee to certify compliance to this QSOP PERFORANCE/R ELIABILITY Function -- Shall function as intended when evaluated in the manufacturer s recommended use position(s). IPORTANT NOTE: The information presented under the "Criteria" lists the modifications that need to be made to the cited test standards. When a modification is less stringent that the actual standard, testing is not required if the licensee can show they have already met a more stringent standard. Rating Key: eets N Does Not eet Not Applicable

9 ATTEL INC. Page 9 of 13 PART 1

10 ATTEL INC. Page 10 of 13 PART 2 The test results of the samples submitted on August 25, 2015 as reported in Technical Report No. (5215) are as follow: ATTEL LICENSED REQUIREENTS DOCUENT FOR Toys for Children Over 3 Years of Age Evaluation Citation/ethod Criteria Rating DOCUENTATION Documentation can be accepted for -- ACCEPTANCE all test requirements as outlined in the attel 3 rd Party Lab Engagement Document. HAZARD ALYSIS -- Action items from the Hazard -- Analysis must be completed prior to testing QUALIFICATION OF DESIGN -- Action items from the Qualification -- of Design must be completed prior to production start PRODUCT CLASSIFICATION attel Quality Product atrix The 3rd Party lab shall verify the -- core/non-core and involvement level classification of the licensed consumer product and follow the process flow chart, as appropriate, to complete testing according to the attel Licensing Program. Lab to indicate the core/non-core and involvement level classification in the rating column. NOT PERITTED LIST attel Quality Product atrix The 3rd Party lab shall verify that -- the licensed product is not present on the not-permitted list. If the product is found to be on the notpermitted list, testing should stop immediately and the attel Quality Engineer must be notified LABELING REQUIREENTS -- Licensee is only responsible to meet regulatory labeling requirements unless otherwise noted in this section. Labeling requirements mentioned or referred to in attel QSOPs can be omitted. --

11 ATTEL INC. Page 11 of 13 PART 2 ATTEL LICENSED REQUIREENTS DOCUENT FOR Toys for Children Over 3 Years of Age Evaluation Citation/ethod Criteria Rating AGE GRADING REGULATORY REQUIREENTS GENERAL REQUIREENTS CPSC Age Determination Guidelines / attel Child Research Expert Industry, Union, Federal, and State requirements All products shall be tested according to either the appropriate age grade, as determined by 3 rd Party Test Lab, the labeled age grade, or attel specified age grade, whichever is most stringent. In the event the sample is not age labeled or attel has not specified an age grade, the 3 rd Party Test Lab will determine the appropriate age grade and test accordingly. Note: A developmental statement, weight limit, etc may replace an age-grade. If appropriate age-grade or attel age-grade is determined to be under 3 years of age, the 3 rd party lab must notify the attel Quality Engineer before any testing takes place. ust meet all requirements for country/countries of distribution as determined by a Third Party Test Lab. Refer to the 3 rd party lab engagement document to determine the appropriate level of requirements to be applied. Rubber Latex -- Product and package must not contain natural rubber latex. Licensee can submit letter of guarantee to show compliance. edical Claims -- There must not be any medical claims without the accompanying Product and Package Information FDA or equivalent approval -- The following must be located on the product and package: Licensee name, Country of origin, Unique product identifier, Date code, Licensee address (package only) Labeled Age Grade: 3 and up Appropriate or attel Specified Age Grade: Tested Age Grade: Over 3 years

12 ATTEL INC. Page 12 of 13 PART 2 ATTEL LICENSED REQUIREENTS DOCUENT FOR Toys for Children Over 3 Years of Age Evaluation Citation/ethod Criteria Rating Consumer Assemblies -- One time assemblies should not exceed 89N (20lb)s of force. Repeated assemblies should not exceed 44.5 N (10lbs) of force. Claims Verification -- Any claims made on product, package, or instructions must be substantiated. Also includes pictures and images. Promotional edia Depictions Of Water Scenes QSOP 3451 To provide requirements for promotional media content and provide guidelines for identifying unsafe or inappropriate acts for children in or near the bath or other bodies of water. Promotional edia Depictions of Wheel & Street Scenes QSOP 3452 Promotional edia - QSOP 8001 Depiction of Unsafe/Inappropriate Acts Toy Standard US - AST F963, Canada - Hazardous Products (Toys) Regulations ( C.R.C., c. 931), Provide guidelines for evaluating promotional media for unsafe or inappropriate acts in accordance with global advertising codes. Promotional media must not depict unsafe or inappropriate acts Product must comply with one of the cited standards. Licensee can show conformance to any of the stated test methods. Polycarbonate Bisphenol A QSOP 3627 The following should not contain Bisphenol A. Omit section Accessible plastic portions of products for children 3 which are intended to be mouthed Accessible plastic food contact items intended for children 3 Flame Retardants QSOP 3614 A declaration of compliance must be obtained from licensee to certify compliance to this QSOP PERFORANCE/RELIABILITY Function -- Shall function as intended when evaluated in the manufacturer s recommended use position(s). IPORTANT NOTE: The information presented under the "Criteria" lists the modifications that need to be made to the cited test standards. When a modification is less stringent that the actual standard, testing is not required if the licensee can show they have already met a more stringent standard. Rating Key: eets N Does Not eet Not Applicable

13 ATTEL INC. Page 13 of 13 PART 2