ISO/IEC JTC1/SC7 /N2646R
|
|
- Brittany Higgins
- 5 years ago
- Views:
Transcription
1 ISO/IEC JTC1/SC7 Software and System Engineering Secretariat: CANADA (SCC) ISO/IEC JTC1/SC7 /N2646R Document Type Title Marketing Material ISO/IEC Marketing Presentation Source WG 7 Project Status Final Reference Action ID FYI Due Date Mailing Date Initial: ; Updated version: Distribution AG, ITTF No. of Pages 23 Note Address reply to: ISO/IEC JTC1/SC7 Secretariat École de technologie supérieure Département de génie électrique 1100 Notre Dame Ouest, Montréal, Québec Canada H3C 1K3 secretariat@jtc1-sc7.org
2 ISO/IEC The System Life Cycle Process standard for the 21 st century
3 Copyright This presentation was developed by delegates to ISO/IEC JTC 1/SC 7/WG 7 Life cycle management for the purposes of raising awareness about, and promoting the use of ISO/IEC You may use this presentation freely but it must retain this acknowledgement statement. 2 August 2002 Slide 2
4 Agenda Background History ISO/IEC overview Benefits 2 August 2002 Slide 3
5 Background Why ISO/IEC was developed Large International Market for systems engineering services and related products Need for a common process framework In 1994 no systems engineering standard addressed hardware and software in a concurrent and integrated fashion. Conventional engineering and software engineering were marching along their separate ways, particularly in the areas of terminology, design representation, and measurement Systems engineering itself was not fully integrated. 2 August 2002 Slide 4
6 History of ISO/IEC Initial planning started in 1994 Scheduled to be published August 2002 Resolved over 3,800 comments that encompassed 10 revisions of this document Participation of 18+ countries with over 40 technical experts Cost USD 8 million (estimated) 2 August 2002 Slide 5
7 ISO/IEC scope ISO/IEC establishes a common framework for describing the life cycle of systems created by humans. It defines a set of processes and associated terminology. These processes can be applied at any level in the hierarchy of a system s development. ISO/IEC concerns those systems that are man-made made and may be configured with one or more of the following: hardware, software, humans, or processes. 2 August 2002 Slide 6
8 Applicability of ISO/IEC Key business domains Aerospace Telecommunications Transportation systems Military systems Ship building Finance and Administrative systems Information Technology systems 2 August 2002 Slide 7
9 Influence profiles of ISO/IEC Business Managers Project Managers ISO/IEC Systems Engineers Specialist Engineers Enterprise and Agreement Processes Project Processes Technical Processes Technical Processes 2 August 2002 Slide 8
10 Uses of ISO/IEC Acquisition model Supplier management Supply model Development Risk reduction Organizational development Professional development Process improvement program 2 August 2002 Slide 9
11 ISO/IEC is part of the SC 7 Integrated set of Standards ISO/IEC TR Capability ISO/IEC & ISO/IEC Life Cycle ISO 9001 & ISO Quality 2 August 2002 Slide 10
12 System life cycle processes ISO/IEC Agreement processes Acquisition Supply Enterprise processes Enterprise environment management Investment management System life cycle processes management Resource management Quality management Project processes Project planning Project assessment Project control Decisionmaking Risk management Configuration management Information management Technical processes Stakeholder requirements definition Requirements analysis Architectural design Implementation Integration Verification Transition Validation Operation Maintenance Disposal Special process Tailoring 2 August 2002 Slide 11
13 Life cycle processes ISO/IEC 15288: Title Purpose Outcome Activity 2 August 2002 Slide 12
14 Development implemented by processes ISO/IEC structure Processes Outcomes Activities PROCESSES (25) ) Outcomes (123) Activities (208) 2 August 2002 Slide 13
15 System Life Cycle processes Example stages Stage Concept Development Production Utilization Support Retirement Description Analyze needs, identify concepts and develop solutions Engineer a product that is a producible item Manufacture the item(s) Operate and use the item(s) Maintain and support the item(s) Retire, dispose and archive 2 August 2002 Slide 14
16 Relationship between ISO/IEC and ISO/IEC Project Planning Project Assessment Project Control Usability Decision Making Risk Management Configuration Management Information Management Stakeholder Requirements Definition Requirements Analysis Validation Transition Verification Operation Maintenance Architectural Design Implementation Integration Disposal Hardware Implementation Enterprise Environment Management Investment Management Software Implementation Refer to ISO/IEC Human Task Implementation System Life Cycle Processes Management Resource Management Quality Management Acquisition Supply 2 August 2002 Slide 15
17 System life cycle processes Processes ISO/IEC structure The purpose of the process is stated in a paragraph that describes at a high level the overall goal for performing the process Outcomes An outcome is an observable result of the successful achievement of the purpose of the process. Activities The Activities attribute is used to provide a structural decomposition of a process 2 August 2002 Slide 16
18 Example of ISO/IEC Acquisition Process: outcomes A strategy for the acquisition is established A supplier is selected Communication with the supplier is maintained A justification for the selection is declared An agreement with defined acceptance criteria is established A product or service complying with the agreement is accepted Payment or other consideration is rendered 2 August 2002 Slide 17
19 ISO/IEC Provides a comprehensive and integrated framework for managing the full life cycle of systems for: Small, medium and large organizations Internal self-imposed use as well as providing a basis for contractual arrangements 2 August 2002 Slide 18
20 Benefits of using ISO/IEC A world class approach to systems engineering and systems management Life cycle modelling of systems Improved quality of the product Improved productivity Improved customer satisfaction Better foundation for growth and product enhancements 2 August 2002 Slide 19
21 Benefits of ISO/IEC Life cycle process standard providing: What should be assessed A holistic view of software and systems engineering A basis for stage-based life cycle models A process framework that can be tailored to suit A framework that reduces development risk A basis for communicating A basis for co-ordinating ordinating work 2 August 2002 Slide 20
22 Conclusion ISO/IEC is a key reference for any situation where systems are concerned Life cycle models are a key concept for successful systems 2 August 2002 Slide 21
23 Further reading 2 August 2002 Slide 22
24 Who to contact <insert local details> 2 August 2002 Slide 23
ISO/IEC JTC1/SC7 N2683
ISO/IEC JTC1/SC7 Software & System Engineering Secretariat: CANADA (SCC) ISO/IEC JTC1/SC7 N2683 2002-07-25 Document Type PDTR Ballot Title PDTR 19760 Systems Engineering Guide for ISO/IEC 15288 (System
More informationISO/IEC JTC1/SC7 /N3758
ISO/IEC JTC1/SC7 Software and Systems Engineering Secretariat: CANADA (SCC) ISO/IEC JTC1/SC7 /N3758 2007-06-26 Document Type Title Source Report SC7 Chairman Presentation to the SC7 Plenary, Moscow, 2007-05-21
More informationISO/IEC JTC1/SC7 Software & Systems Engineering Secretariat: CANADA (SCC) SC7_AG; JTC1 Sec.; P, O & L Members
ISO/IEC JTC1/SC7 Software & Systems Engineering Secretariat: CANADA (SCC) ISO/IEC JTC1/SC7 N3260 2005-06-13 Doc. Type Title Source NWI Proposal New Work Item Proposal Revision of ISO/IEC 12207 - Systems
More informationISO/IEC JTC1/SC7 /N3556
ISO/IEC JTC1/SC7 Software and Systems Engineering Secretariat: CANADA (SCC) ISO/IEC JTC1/SC7 /N3556 2006-06-29 Document Type Title Source WG Meeting Minutes Meeting Minutes, WG04, Software and Systems
More informationISO/IEC JTC1/SC7 /N4537
ISO/IEC JTC1/SC7 Software and Systems Engineering Secretariat: CANADA (SCC) Document Type Report ISO/IEC JTC1/SC7 /N4537 2010-01-20 Title Management systems terminology: Systematic listing of management
More informationApplying Software Engineering Standards in Small settings
Applying Software Engineering Standards in Small settings Recent historical perspective and Initial Achievements Claude Y Laporte École de technologie supérieure Editor SC 7/Working Group 24 Content Introduction
More informationISO/IEC JTC1/SC7 N2182
ISO/IEC JTC1/SC7 Software Engineering Secretariat: CANADA (SCC) ISO/IEC JTC1/SC7 N2182 1999/07/19 Document Type Title Source Proposed Draft Amendment 12207/PDAM 1 - Software Engineering - Life Cycle Processes.
More informationISO/IEC INTERNATIONAL STANDARD. Systems and software engineering System life cycle processes IEEE
INTERNATIONAL STANDARD ISO/IEC 15288 IEEE Std 15288-2008 Second edition 2008-02-01 Systems and software engineering System life cycle processes Ingénierie des systèmes et du logiciel Processus du cycle
More informationSystems and software engineering Software life cycle processes
INTERNATIONAL STANDARD ISO/IEC/ IEEE 12207 First edition 2017-11 Systems and software engineering Software life cycle processes Ingénierie des systèmes et du logiciel Processus du cycle de vie du logiciel
More informationApplying Software Lifecycle Processes in Very Small Enterprises - New standard developments -
Applying Software Lifecycle Processes in Very Small Enterprises - New standard developments - Tony Coletta Qual. I.T. Consulting Head of Italian delegation to ISO/IEC JTC1 SC7 email:tony.coletta@virgilio.it
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO/IEC/ IEEE 12207 First edition 2017-11 Systems and software engineering Software life cycle processes Ingénierie des systèmes et du logiciel Processus du cycle de vie du logiciel
More informationAn Information Model for Software Quality Measurement with ISO Standards
An Information Model for Software Measurement with ISO Standards Alain ABRAN École de Technologie Supérieure University of Québec, 1100 Notre-Dame Ouest, Montréal, Québec H3W 1T8, Canada aabran@ele.etsmtl.ca
More informationApplying ISO/IEC Software Engineering Standards in Small Settings: Historical Perspectives and Initial Achievements
Applying ISO/IEC Software Engineering Standards in Small Settings: Historical Perspectives and Initial Achievements Claude Y. Laporte* Claude.Y.Laporte@etsmtl.ca 1-514 396-8956 Alain April* Alain.April@etsmtl.ca
More informationPSM. Practical Software and Systems Measurement A foundation for objective project management. PSM TWG ISO/IEC and IEEE Standards.
Practical Software and Systems Measurement A foundation for objective project management PSM PSM TWG ISO/IEC and IEEE Standards March 29, 2006 PSM 1 29 Mar 06 Current Standard Activities ISO/IEC 15939,
More informationSoftware Quality Engineering where to find it in Software Engineering Body of Knowledge (SWEBOK)
Software Quality Engineering where to find it in Software Engineering Body of Knowledge (SWEBOK) Witold Suryn 1, Anabel Stambollian 2, Jean-Charles Dormeux 3, Luc Bégnoche 4 1 Software and Information
More informationBest Practice Information Aids for CMMI SM -Compliant Process Engineering
Paul R. Croll Chair, IEEE Software Engineering Standards Committee Vice Chair, ISO/IEC JTC1/SC7 U.S. TAG Computer Sciences Corporation pcroll@csc.com Best Practice Information Aids for CMMI SM -Compliant
More informationThis is a preview - click here to buy the full publication INTERNATIONAL STANDARD
This is a preview - click here to buy the full publication INTERNATIONAL STANDARD ISO/IEC 12207 First edition 1995-08-01 Information technology - Software life cycle processes Technologies de / information
More informationISO/IEC INTERNATIONAL STANDARD. Systems and software engineering Measurement process. Ingénierie des systèmes et du logiciel Processus de mesure
INTERNATIONAL STANDARD ISO/IEC 15939 Second edition 2007-08-01 Systems and software engineering Measurement process Ingénierie des systèmes et du logiciel Processus de mesure Reference number ISO/IEC 15939:2007(E)
More informationISO/IEC INTERNATIONAL STANDARD. Systems and software engineering Measurement process. Ingénierie des systèmes et du logiciel Processus de mesure
INTERNATIONAL STANDARD ISO/IEC 15939 Second edition 2007-08-01 Systems and software engineering Measurement process Ingénierie des systèmes et du logiciel Processus de mesure Reference number ISO/IEC 2007
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO/IEC 15504-5 First edition 2006-03-01 Information technology Process Assessment Part 5: An exemplar Process Assessment Model Technologies de l'information Évaluation des processus
More informationSystems and software engineering Life cycle management. Part 4: Systems engineering planning
INTERNATIONAL STANDARD ISO/IEC/ IEEE 24748-4 First edition 2016-05-15 Systems and software engineering Life cycle management Part 4: Systems engineering planning Ingénierie des systèmes Gestion du cycle
More informationAn Innovative Approach to the Development of Project Management Processes for Small-scale Projects in a large Engineering Company
An Innovative Approach to the Development of Project Management Processes for Small-scale Projects in a large Engineering Company Claude Y. Laporte École de technologie supérieure Department of Software
More information1 Introduction to Software Engineering Standards
1 Introduction to Software Engineering Standards Francois Coallier ISO/IEC JTC1/SC7 Secretary, Bell Canada, Canada* Prof. Motoei Azuma ISO/IEC JTC1/SC7/WG6 Convenor, Waseda University, Japan The SPICE
More informationDesigning Systems Engineering Profiles for VSEs
Designing Systems Engineering Profiles for VSEs Claude Y. Laporte 1 Rory V. O Connor 2, 3 1 École de technologie supérieure, Montréal, Canada 2 Lero, the Irish Software Engineering Research Centre, Ireland
More informationV&V Measurement Management Tool for Safety-Critical Software
V&V Measurement Management Tool for Safety-Critical Software Edgardo Palza*, Alain Abran*, Christopher Fuhrman*, Eduardo Miranda** *École de Technologie Supérieure ETS 1100 Notre-Dame Ouest, H3C 1K3 Montréal,
More informationISO/IEC Information technology Systems and software engineering Application management
INTERNATIONAL STANDARD ISO/IEC 16350 First edition 2015-08-01 Information technology Systems and software engineering Application management Technologies de l information Gestion d application Exigences
More informationAn architecture for defining the processes of the software and. systems life cycles
An architecture for defining the processes of the software and systems life cycles Terence P. Rout and Peter Bernus Software Quality Institute and School of Computing and Information Technology Griffith
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO/IEC 90003 First edition 2004-02-15 Software engineering Guidelines for the application of ISO 9001:2000 to computer software Ingénierie du logiciel Lignes directrices pour l'application
More informationMapping of Fusion Process Model onto ISO/IEC 12207:2008
Mapping of Fusion Model onto ISO/IEC 12207:2008 Rupinder Kaur; Jyotsna Sengupta Department of Computer Science; Punjabi University Patiala, India rupadeo@gmail.com Abstract Fusion Model is a component
More informationThis is a preview - click here to buy the full publication TECHNICAL REPORT
TECHNICAL REPORT ISO/IEC TR 9126-4 First edition 2004-04-01 Software engineering Product quality Part 4: Quality in use metrics Génie du logiciel Qualité des produits Partie 4: Qualité en métrologie d'usage
More informationChapter 1. Software Engineering Supporting Processes
Chapter 1 Software Engineering Supporting Processes 1. Introduction to IEEE/EIA Standard 12207.0-1996 IEEE/EIA Standard 12207.0-1996 establishes a common framework for software life cycle processes. The
More informationA COMPARATIVE ANALYSIS OF THREE KNOWLEDGE AREAS OF THE GUIDE TO THE SOFTWARE ENGINEERING BODY OF KNOWLEDGE WITH THE RATIONAL UNIFIED PROCESS
A COMPARATIVE ANALYSIS OF THREE KNOWLEDGE AREAS OF THE GUIDE TO THE SOFTWARE ENGINEERING BODY OF KNOWLEDGE WITH THE RATIONAL UNIFIED PROCESS Michel Brouillette, École de technologie supérieure, m_broue@hotmail.com.
More informationSystems and software engineering Content of life-cycle information items (documentation)
INTERNATIONAL STANDARD ISO/IEC/ IEEE 15289 Third edition 2017-06 Systems and software engineering Content of life-cycle information items (documentation) Ingénierie des systèmes et du logiciel Contenu
More informationSystems and software engineering Life cycle management. Part 6: System integration engineering
TECHNICAL SPECIFICATION ISO/IEC TS 24748-6 First edition 2016-12-01 Systems and software engineering Life cycle management Part 6: System integration engineering Ingénierie des systèmes et du logiciel
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO/IEC 12207 IEEE Std 12207-2008 Second edition 2008-02-01 Systems and software engineering Software life cycle processes Ingénierie des systèmes et du logiciel Processus du cycle
More informationISO/IEC/ IEEE Systems and software engineering Content of life-cycle information items (documentation)
INTERNATIONAL STANDARD This is a preview - click here to buy the full publication ISO/IEC/ IEEE 15289 Third edition 2017-06 Systems and software engineering Content of life-cycle information items (documentation)
More informationSystem Engineering. Instructor: Dr. Jerry Gao
System Engineering Instructor: Dr. Jerry Gao System Engineering - System Engineering Hierarchy - System Modeling - Information Engineering: An Overview - Product Engineering: An Overview - Information
More informationDRAFT ISO/IEC INTERNATIONAL STANDARD. Information technology Security techniques Information security management system implementation guidance
INTERNATIONAL STANDARD ISO/IEC 27003 First edition 2010-02-01 Information technology Security techniques Information security management system implementation guidance Technologies de l'information Techniques
More informationA Systems Process Lifecycle Standard for Very Small Entities: Development and Pilot Trials
Laporte, C. Y., O Connor, R. V., A Systems Process Lifecycle Standard for Very Small Entities: Development and Pilot Trials, 21th European Conference on Systems, Software and Services Process Improvement
More informationNATO POLICY ON AN INTEGRATED SYSTEMS APPROACH TO QUALITY THROUGH THE LIFE CYCLE
AQAP 2000 NATO POLICY ON AN INTEGRATED SYSTEMS APPROACH TO QUALITY THROUGH THE LIFE CYCLE AQAP 2000 (June 2003) I ORIGINAL AQAP 2000 Page blank II ORIGINAL AQAP 2000 NORTH ATLANTIC TREATY ORGANIZATION
More informationDeveloping Standards for Systems of Systems (SoS) Engineering IS0/IEC/IEEE 21839: SoS Considerations through the Lifecycle of a System
Developing Standards for Systems of Systems (SoS) Engineering IS0/IEC/IEEE 21839: SoS Considerations through the Lifecycle of a System Mr. Garry Roedler Lockheed Martin garry.j.roedler@lmco.com Dr. Judith
More informationSoftware Engineering Support Activities for Very Small Entities
Software Engineering Support Activities for Very Small Entities Vincent Ribaud, Philippe Saliou, Rory O Connor, Claude Laporte To cite this version: Vincent Ribaud, Philippe Saliou, Rory O Connor, Claude
More informationSoftware Engineering Support Activities for Very Small Entities
Software Engineering Support Activities for Very Small Entities Vincent Ribaud, Philippe Saliou, Rory O Connor, Claude Laporte To cite this version: Vincent Ribaud, Philippe Saliou, Rory O Connor, Claude
More informationModel-Based Design Maturity: Benchmarking the Automotive Industry Vinod Reddy Manager, Consulting Services
Model-Based Design Maturity: Benchmarking the Automotive Industry Vinod Reddy Manager, Consulting Services 2014 The MathWorks, Inc. 1 Key questions from our customers about Model-Based Design What is the
More informationDeveloping International Standards for Very Small Enterprises
March 2008 IEEE Computer Page 1 of 4 STANDARDS Developing International Standards for Very Small Enterprises Claude Y. Laporte, École de technologie supérieure Simon Alexandre, Centre d Excellence en Technologies
More informationManaging Systems Engineering Processes: a Multi- Standard Approach
Managing Systems Engineering Processes: a Multi- Standard Approach Rui Xue, Claude Baron, Philippe Esteban, Hamid Demmou To cite this version: Rui Xue, Claude Baron, Philippe Esteban, Hamid Demmou. Managing
More informationHow the Rational Unified Process Supports ISO 12207
How the Rational Unified Process Supports ISO 12207 by Philippe Kruchten Director of Process Development Rational Software Canada "My organization must comply with the ISO Standard 12207; can the RUP help
More informationDeveloping and implementing systems engineering and project management processes at CSiT - A small Canadian company in public transportation
26 th Annual INCOSE International Symposium Edinburgh, UK, July 18-21, 2016 Developing and implementing systems engineering and project management processes at CSiT - A small Canadian company in public
More informationSystems engineering System life cycle processes
BRITISH STANDARD BS ISO/IEC 15288:2002 Systems engineering System life cycle processes ICS 35.080 National foreword This British Standard reproduces verbatim ISO/IEC 15288:2002 and implements it as the
More informationOn Board Use and Application of Computer based systems
(Dec 2006 (Corr.1 Oct 2007) (Rev.1 Sept 2010) (Rev.2 June 2016 Complete Revision) On Board Use and Application of Computer based systems 1. Introduction 1.1 Scope These requirements apply to design, construction,
More informationStatus and outlook VDA QMC working group 13 Automotive SPICE 3.0, Blue-Gold Book 2016
Status and outlook VDA QMC working group 13 Automotive SPICE 3.0, Blue-Gold Book 2016 Kai-Helge Dieken, Head of VDA QMC WG13 Jan Morenzin, VDA QMC Page 1 Agenda VDA QMC WG 13 mission Working Group Roadmap
More informationInformation technology Security techniques Information security management systems Overview and vocabulary
INTERNATIONAL STANDARD ISO/IEC 27000 Third edition 2014-01-15 Information technology Security techniques Information security management systems Overview and vocabulary Technologies de l information Techniques
More informationA Proposed Measurement Role in the Rational Unified Process and its Implementation with ISO 19761: COSMIC-FFP
A Proposed Measurement Role in the Rational Unified Process and its Implementation with ISO 19761: COSMIC-FFP Saadi Azzouz, Alain Abran École de Technologie Supérieure ETS 1100 Notre-Dame Ouest, Montréal,
More informationDocument: ISO/TC 176/SC 2/N 730. Our ref
Document: ISO/TC 176/SC 2/N 730 Our ref Secretariat of ISO/TC 176/SC 2 Date: 30 June 2005 To the Members of ISO/TC 176/SC 2 - Quality Management and Quality Assurance/ Quality Systems Design Specification
More informationHARMONIZATION OF STANDARDS FOR ENTERPRISE INTEGRATION AN URGENT NEED. Martin Zelm
HARMONIZATION OF STANDARDS FOR ENTERPRISE INTEGRATION AN URGENT NEED Martin Zelm CIMOSA Association Gehenbuehlstr 18a, D-70499 Stuttgart e-mail: martin.zelm@cimosa.de Abstract: Business globalisation requires
More informationISO/IEC INTERNATIONAL STANDARD. Software and systems engineering Tools and methods for product line technical management
INTERNATIONAL STANDARD ISO/IEC 26555 First edition 2013-03-01 Software and systems engineering Tools and methods for product line technical management Ingénierie du logiciel et des systèmes Outils et méthodes
More informationISO/IEC INTERNATIONAL STANDARD. Corporate governance of information technology. Gouvernance des technologies de l'information par l'entreprise
INTERNATIONAL STANDARD ISO/IEC 38500 First edition 2010-06-01 Corporate governance of information technology Gouvernance des technologies de l'information par l'entreprise Reference number ISO/IEC 38500:2008(E)
More informationISO/IEC TR TECHNICAL REPORT. Information technology Process assessment Part 7: Assessment of organizational maturity
TECHNICAL REPORT ISO/IEC TR 15504-7 First edition 2008-12-15 Information technology Process assessment Part 7: Assessment of organizational maturity Technologies de l'information Évaluation des procédés
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO/IEC 38500 Second edition 2015-02-15 Information technology Governance of IT for the organization Technologies de l information Gouvernance des technologies de l information pour
More informationJune 21, 2011 (Tuesday)
June 21, 2011 (Tuesday) 55 th EOQ Congress KEMPINSKI HOTEL CORVINUS Erzsébet tér 7-8, Budapest V. BALLROOM Tuesday 9:00 10:30 8.1. OPENING CEREMONY 9.00 Opening Ceremony Zacharias Bilalis, European Commission,
More informationISO/IEC JTC 1 N 10998
ISO/IEC JTC 1 N 10998 ISO/IEC JTC 1 Information technology Secretariat: ANSI (USA) Document type: Title: Status: Text for PDTR ballot or comment Text of 2nd PDTR 38502, Governance of IT - Framework and
More informationDevelopment of an Application in a Large State-Owned Utility Provider Using an Agile Approach with ISO 29110
Development of an Application in a Large State-Owned Utility Provider Using an Agile Approach with ISO 29110 Kim Lebel, M.Eng, Hydro-Québec Claude Y. Laporte, Ph.D., École de technologie supérieure Mini
More informationISO/IEC JTC1/SC7 /N3606
ISO/IEC JTC1/SC7 Software and Systems Engineering Secretariat: CANADA (SCC) ISO/IEC JTC1/SC7 /N3606 2006-10-13 Document Type Title Source Business Plan ISO/IEC JTC 1/SC7 Business Plan for the JTC 1 Plenary,
More informationDATA ITEM DESCRIPTION
DATA ITEM DESCRIPTION Title: HUMAN SYSTEMS INTEGRATION PROGRAM PLAN Number: Approval Date: 20070404 AMSC Number: N7716 Limitation: N/A DTIC Applicable: N/A GIDEP Applicable: N/A Office of Primary Responsibility:
More informationNATO Integrated Quality Requirements for Software throughout the Life Cycle
NATO Integrated Quality Requirements for Software throughout the Life Cycle Edition 1 (July 2001) -i- -ii- NORTH ATLANTIC TREATY ORGANIZATION MILITARY AGENCY FOR STANDARDIZATION (MAS) NATO LETTER OF PROMULGATION
More informationAnalyzing a Process Profile for Very Small Software Enterprises
Analyzing a Process Profile for Very Small Software Enterprises Timo Mäkinen & Timo Varkoi Tampere University of Technology, Pori timo.makinen@tut.fi, timo.varkoi@tut.fi Abstract Small software enterprises
More informationISO/IEC Information technology Service management Part 1: Service management system requirements
This is a preview - click here to buy the full publication INTERNATIONAL STANDARD ISO/IEC 20000-1 Second edition 2011-04-15 Information technology Service management Part 1: Service management system requirements
More informationSystems Engineering International Standards and Support Tools for Very Small Enterprises
Systems Engineering International Standards and Support Tools for Very Small Enterprises Claude Y. Laporte École de technologie supérieure Department of Software and IT Engineering 1100 Notre-Dame Street
More informationInformation technology IT asset management. Part 1: IT asset management systems Requirements
INTERNATIONAL STANDARD ISO/IEC 19770-1 Third edition 2017-12 Information technology IT asset management Part 1: IT asset management systems Requirements Technologies de l'information Gestion des actifs
More informationVery Small Enterprises (VSE) Quality Process Assessment
Very Small Enterprises (VSE) Quality Process Assessment JEAN-MARC DESHARNAIS MOHAMMAD ZAROUR ALAIN APRIL École de Technologie Supérieure, Department of Software and IT Engineering 1100 Notre-Dame Ouest,
More informationExecutive Overview. Transitioning to ISO 9001:2015 Quality Management System. Biafore Associates Inc. Overview Objectives
Executive Transitioning to ISO 9001:2015 Quality Management System Biafore Associates Inc. This guideline is for training purposes only; Not ISO controlled Objectives The overview objectives are as follows:
More informationThis document is a preview generated by EVS
TECHNICAL REPORT ISO/IEC TR 33014 First edition 2013-12-01 Information technology Process assessment Guide for process improvement Technologies de l'information Évaluation des procédés Guide de l'amélioration
More informationISO/IEC INTERNATIONAL STANDARD. Information technology Service management Part 2: Code of practice
INTERNATIONAL STANDARD ISO/IEC 20000-2 First edition 2005-12-15 Information technology Service management Part 2: Code of practice Technologies de l'information Gestion de services Partie 2: Code de bonne
More informationSystems and software engineering Life cycle management. Part 5: Software development planning
INTERNATIONAL STANDARD ISO/IEC/ IEEE 24748-5 First edition 2017-06 Systems and software engineering Life cycle management Part 5: Software development planning Ingénierie des systèmes et du logiciel Gestion
More informationApplying Software Engineering Standards in Very Small Entities
Applying Software Engineering Standards in Very Small Entities From Startups to Grownups Claude Y. Laporte, Mirna Munoz, Jezreel Mejia Miranda, and Rory V. O Connor Standards and their associated technical
More informationISO/IEC INTERNATIONAL STANDARD. Information technology Service management Part 2: Guidance on the application of service management systems
INTERNATIONAL STANDARD ISO/IEC 20000-2 Second edition 2012-02-15 Information technology Service management Part 2: Guidance on the application of service management systems Technologies de l'information
More information9100 Team July, IAQG is a trademark the International Aerospace Quality Group. Copyright 2014 IAQG. All rights reserved.
9100 Series 2016 Revision Overview 9100 Team July, 2014 1 9100 Revision The Plan 9100 Series Revision High Level Plan The 9100 is based on ISO 9001 and is thus affected by the ISO TC176 revision activity
More informationSystems and software engineering Measurement process
INTERNATIONAL STANDARD ISO/IEC/ IEEE 15939 First edition 2017-05 Systems and software engineering Measurement process Ingénierie des systèmes et du logiciel Processus de mesure Reference number ISO/IEC/IEEE
More informationSystems and software engineering Measurement process
INTERNATIONAL STANDARD ISO/IEC/ IEEE 15939 First edition 2017-05 Systems and software engineering Measurement process Ingénierie des systèmes et du logiciel Processus de mesure Reference number ISO/IEC/IEEE
More informationThe CMMI Product Suite and International Standards
Pittsburgh, PA 15213-3890 The Product Suite and International Standards Dave Kitson, Jeanie Kitson, Terry Rout and Pedro Sousa is registered in the US Patent & Trademark Office by Carnegie Mellon University
More informationSE351 Roadmap. SE351a: Software Project & Process Management. W3.2: Software Development Lifecycles
SE351a: Software Project & Process Management W3.2: Software Development Lifecycles 06 Oct, 2005 SE351a, ECE UWO, (c) Hamada Ghenniwa SE351 Roadmap Introduction to Software Project Management Project Management
More informationOerlikon Contraves Inc. is a systems
Claude Y. Laporte École de Technologie Supérieure Oerlikon Contraves Inc. is a systems integrator specializing in the design, assembly, integration, testing, and delivery of complete systems solutions,
More informationISO/IEC INTERNATIONAL STANDARD. Information technology Service management Part 1: Service management system requirements
INTERNATIONAL STANDARD ISO/IEC 20000-1 Second edition 2011-04-15 Information technology Service management Part 1: Service management system requirements Technologies de l'information Gestion des services
More informationMETUCHEN CAPACITORS INCORPORATED. Quality Manual P.O. BOX HIGHWAY 35, SUITE 2 HOLMDEL NJ USA
METUCHEN CAPACITORS INCORPORATED Quality Manual P.O. BOX 399 2139 HIGHWAY 35, SUITE 2 HOLMDEL NJ 07733 USA Copy Holder Copy Number : 1 This Quality Manual Covers the activities and functions performed
More informationSeminar on ISO/IEC/IEEE 15288:2015 Systems and Software Engineering -- System Life Cycle Processes. Harold Bud Lawson
Seminar on ISO/IEC/IEEE 15288:2015 Systems and Software Engineering -- System Life Cycle Processes Harold Bud Lawson FELLOW FELLOW and LIFE MEMBER IEEE COMPUTER SOCIETY CHARLES BABBAGE COMPUTER PIONEER
More informationTOPIC DESCRIPTION SUPPLEMENT for the SYSTEMS ENGINEERING SURVEY DESCRIPTION
1 2 Objectives of Systems Engineering 3 4 5 6 7 8 DoD Policies, Regulations, & Guidance on Systems Engineering Roles of Systems Engineering in an Acquisition Program Who performs on an Acquisition Program
More informationSMB/6286/R. The current title of TC56 is "Dependability".
SMB/6286/R STRATEGIC BUSINESS PLAN (SBP) IEC/TC OR SC: SECRETARIAT: DATE: 56 GB 2017-11-02 A. TITLE AND SCOPE OF TC 56 Title The current title of TC56 is "Dependability". Scope The purpose of TC 56 is
More informationISO/IEC INTERNATIONAL STANDARD. Information technology Security techniques Information security management Measurement
INTERNATIONAL STANDARD ISO/IEC 27004 First edition 2009-12-15 Information technology Security techniques Information security management Measurement Technologies de l'information Techniques de sécurité
More informationSeptember 17, 2012 Pittsburgh ISACA Chapter
September 17, 2012 Pittsburgh ISACA Chapter What is COBIT? Control Objectives for Information and related Technologies ISACA s guidance on the enterprise governance and management of IT. Builds on more
More informationISO/IEC INTERNATIONAL STANDARD. Information technology Software asset management Part 1: Processes
INTERNATIONAL STANDARD ISO/IEC 19770-1 First edition 2006-05-01 Information technology Software asset management Part 1: Processes Technologies de l'information Gestion de biens de logiciel Partie 1: Procédés
More informationCertified Business Analysis Professional - Introduction
Certified Business Analysis Professional - Introduction COURSE STRUCTURE Business Analysis Monitoring and Planning Module 1 Elicitation and Collaboration Module 2 Requirement Lifecycle Management Module
More informationSupply Chain. Example Policy. Author: A Heathcote Date: 24/05/2017 Version: 1.0
Example Policy Author: A Heathcote Date: 24/05/2017 Version: 1.0 Copyright 2017 Health and Social Care Information Centre. The Health and Social Care Information Centre is a non-departmental body created
More informationOverview of Maintenance. CPRE 416-Software Evolution and Maintenance-Lecture 3
Overview of Maintenance CPRE 416-Software Evolution and Maintenance-Lecture 3 1 Need to Study Software Maintenance Software Maintenance is the single most expensive activity in software engineering requiring
More informationINCOSE Certification for Systems Engineers & Systems Engineering: Fundamental Maxims
INCOSE Certification for Systems Engineers & Systems Engineering: Fundamental Presented to The INCOSE Swiss Chapter December 2012 Sysnovation, LLC 13741 Johnson Memorial Drive Shakopee, MN 55379 USA www.sysnovation.com
More informationThe Network of Centers for Very Small Entities (VSEs) Suzhou, China May 26th, 2016 ISO/IEC JTC 1/SC 7- Working Group 24
The Network of Centers for Very Small Entities (VSEs) Suzhou, China May 26th, 2016 ISO/IEC JTC 1/SC 7- Working Group 24 Agenda Australia Belgium Canada Japan Mexico Thailand Australia Australian Country
More informationSoftware Process - Standards, Assessments and Improvement
Chapter 2 Software Process - Standards, Assessments and Improvement (1) Chapter Editor: Wolfgang Emmerich (WE) (2) Participants: AF, CM, JCD (3) Software engineering and software process improvement standards
More informationISO Standards in Strengthening Organizational Resilience, Mitigating Risk & Addressing Sustainability Concerns
ISO Standards in Strengthening Organizational Resilience, Mitigating Risk & Addressing Sustainability Concerns 13 December 2016 Joe Muratore Copyright 2012 BSI. All rights reserved. Enterprise Risk Management
More informationISO/IEC Evolution to an International Standard
ISO/IEC 15504 - Evolution to an International Standard Author Rout, Terry Published 2004 Journal Title Software Process Improvement and Practice DOI https://doi.org/10.1002/spip.167 Copyright Statement
More informationQuEST Forum. TL 9000 Quality Management System. Requirements Handbook
QuEST Forum TL 9000 Quality Management System Requirements Handbook Point Release 6.1 The ICT Quality Management System Performance Excellence through Global ICT Quality Copyright Copyright 2017 Quality
More informationIntroduction and Key Concepts Study Group Session 1
Introduction and Key Concepts Study Group Session 1 PD hours/cdu: CH71563-01-2018 (3 hours each session) 2015, International Institute of Business Analysis (IIBA ). Permission is granted to IIBA Chapters
More information