Disc Type NTC Thermistors
|
|
- Ethel Adams
- 5 years ago
- Views:
Transcription
1 Disc Type NTC Thermistors Type: ERTD The ÒType ERTDÓ are disc type negative temperature coefficient thermistors. Resistances are available from 8 W to 150 kw and B Values are from 3000 K to 5000 K. The thermistors are designed for temperature detections and temperature compensations etc., featuring excellent electrical and thermal stability. n Features l Wide selection of temperature coefficient l Excellent electrical and thermal stability n Recommended Applications l Temperature detection l Temperature compensation for measuring instruments l Temperature compensation for deflection coil in TV n Explanation of Part Numbers E R T D n Derating Curve for the NTC Thermistor For the NTC Thermistor operated in ambient temperatures above 25 ûc, power rating should be derated in accordance with the figure on the right. Rated Load (%) Ambient Temperature ( C)
2 n Ratings and Characteristics Zero-Power B Value ]] Maximum Heat Thermal Time Resistance Table Part No. Resistance (K) Permissible Dissipation Constant Ratio A/B at 25 C(W) Power(W) Constant (s) R (mw/ C) 25/R 50 Curve No. ERTD2FEL ] 200S Ñ ERTD2FFL ] 400S Ñ ERTD2FGL ] 750S ERTD2FFL ] 101S Ñ ERTD2FGL ] 101S ERTD2FGL ] 171S ERTD2FFL ] 251S Ñ ERTD2FGL ] 251S ERTD2FGL ] 301S Ñ ERTD2FFL ] 351S ERTD2FGL ] 601S ERTD2FGL ] 801S ERTD2FGL ] 102S Ñ ERTD2FGL ] 142S Ñ ERTD2FGL ] 202S ERTD2FGL ] 332S ERTD2FHL ] 462S Ñ ERTD2FHL ] 802S ERTD2FHL ] 103S Ñ ERTD2FHL ] 153S ERTD2FHL ] 333S ERTD2FHL ] 503S ERTD2FIL ] 154S ERTD3FEL ] 8R0S ERTD3FFL ] 130S ERTD3FFL ] 160S Ñ ERTD3FFL ] 200S Ñ ERTD3FFL ] 300S Ñ ERTD3FFL ] 400S Ñ ERTD3FGL ] 750S Ñ ERTD3FGL ] 800S Ñ ERTD3FGL ] 131S Ñ ERTD3FGL ] 501S Ñ ERTD3FHL ] 402S Ñ ERTD3FHL ] 203S Ñ ERTD3FIL ] 803S ] Resistance Tolerance Code J K L 5 % 10 % 15 % ]] Tolerance of ÒB valueó: 10 % kn (R 25 /R 50 ) R 25 =Resistance at 25.0 C B= 1/298.15Ð1/ R 50 =Resistance at 50.0 C l Operating Temperature Range: Ð30 to +125 C
3 n Dimensions in mm (not to scale) Straight Lead Type F Type Crimped Lead Type Z Type F Type fd T k W fd D min D min Z Type fd T u e h W fd D max. 6.0 max D (nom.2.5) (nom.5.0) n Resistance vs. Temperature (Table A) n Voltage vs. Current (Table B)
4 n Resistance Color Code Code Color 1(1st Digit) 2(2nd Digit) 3(Multiplier) Black Brown Red Orange Yellow Green Blue Purple Gray White Gold Ñ Ñ 10 Ð1 Silver Ñ Ñ 10 Ð2 n Taping Dimensions in mm (not to scale) Taping Type P P P P fd F Æh 05.0 W Ð0.5 W min. W Ð0.50 W max H H k 2.0 max. fd t
5 Disc Type NTC Thermistors Handling Precautions Safety Precautions The Disc Type NTC Thermistors (hereafter referred to as ÒThe NTC ThermistorsÓ) may fail through burnout, flaming or glowing in the worst case, when subjected to severe conditions of electrical, environmental and/or mechanical stresses. The following Ò Safety Precautions Ó and ÒApplication Notes" should be studied carefully by you. If you have a questionabout the Handling Precautions, please contact our engineering section or factory. 1. Safety Precautions 1.1 Operating Power The NTC Thermistors, should not be operated beyond the specified Maximum Permissible Power in the Catalog or the individual Specifications, otherwise, burnout and damages due to thermal run away may result. (if operated in ambient temperatures above 25 C, power rating should be derated in accordance with the derating curve.) 1.2 Operating Temperature Range The NTC Thermistors should not be operated beyond the specified Operating Temperature Range in the Catalog or the individual Specifications. (Do not touch the heated part of the NTC Themistors by hand at large power consumption.) 1.3 Plastic Molding and Potting In the case of plastic molding or potting, the NTC Thermistors may be damaged or deteriorate due to extremely large mechanical stresses such as expanding and shrinking forces caused by the heat treatment of the plastics applied, depending on curing conditions and type of plastics. 1.4 Environmental Conditions The NTC Thermistors should not be operated and/or stored under following environmental conditions; a) Exposed directly to water or drops of water. b) Exposed directly to sunlight. c) Conditions of dew formation. d) Exposed directly to oil, gasoline or organic solvent and/or atmospheres of them. e) Conditions of deoxidized or corrosive atmospheres such as chlorine, hydrogen sulfide, sulphur oxide and cracked gas from vinyl chloride etc. f) Severe conditions of extreme vibration or shock. 1.5 Mounting DonÔt touch other parts to the thermistor, because the outer coating may not provide insulation after mounting the thermistor. 1.6 Fail-Safe Design for Equipment In applications using Thermistors, of the Thermistors. equipment should be protected against deterioration and failure 2.Application Notes 2.1 Soldering Flux Rosin-based and non-activated type soldering flux is recommended. 2.2 Post Soldering Cleaning In the case of solvent cleaning, outer coating material of the NTC Thermistors may melt in the solvent, depending on the cleaning condition and type of cleaning solvent. 2.3 Abnormal Mechanical Stresses The NTC Thermistors may be damaged or deteriorate when dropped or exposed to a large impact. Excessive shock and impact shall not be applied. 2.4 Soldering (1) When soldering thermistors, the soldering time should be as short as possible to minimize the exposure time of the element to the melting point of solder. Take into account the solder-heat resistance of the product before use. (2) In soldering the device, the body and outer coating section should not be touched by molten solder and/or heated iron tip. 2.5 Long Term Storage (1) The NTC Thermistors should not be stored under severe conditions of high temperature and high humidity. (2) The NTC Thermistors should not be stored under conditions of corrosive atmospheres such as hydrogen sulfide, surfur oxide and chlorine and ammonia etc. (3) The NTC Thermistors should not be exposed to direct sunlight. (4) The NTC Thermistors should not be stored under conditions of dew formation. (5) Store them indoors under 40 C max. and 75 %RH max. Use them within one year and check the solderability before use.
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Multilayer Chip NTC Thermistors Type: ERTJ The miniaturized Multilayer Chip
More informationNTC Thermistors for automotive devices (chip type)
Multilayer NTC Thermistors Series: ERTJ Handling Precautions Safety Precautions The, hereafter referred to as Thermisotrs, is designed for use in automotive devices. When subjected to severe electrical,
More informationMultilayer NTC Thermistors
Multilayer NTC Thermistors Series: ERTJ Handling Precautions Safety Precautions Multilayer NTC Thermistors (hereafter referred to as Thermistors ) should be used for general purpose applications found
More informationPrecision Thick Film Chip Resistors ERJ G: 0201 ERJ R: 0402, 0603, 0805 ERJ E : 0603, 0805, 1206, 1210, 1812, 2010, 2512
Precision Thick Film Chip esistors J G: J : 4, 6, 5 J : 6, 5, 6,,,, 5 Type: J G J,, 6 J, 6,, 4,, T n Features l Small size and lightweight For PCB size reduction and lightweight products l High reliability
More informationAnti-Surge Thick Film Chip Resistors
Anti-Surge Thick Film Chip Re sis tors Type: ERJ PA2, P3, PA3, P6, P8, P14 Features ESD surge characteristics superior to standard metal fi lm resistors High reliability Metal glaze thick fi lm resistive
More informationMaximum. operating. Temperature P/N. current. Reference Only. (*1) (*5) NCU15XH103F60RC 10k±1% 3380±1% operating. Temperature P/N.
Chip NTC Thermistor for temperature sensor and temperature compensation 0402 size P / 8.Part Numbering. (ex.) NC U 5 XH 03 F 60 RC Product ID Series Dimensions Temperature Resistance Resistance Individual
More informationThick Film Chip Resistors
Thick Film Chip Resistors Type: ER XG, 1G, 2G, 3G, 6G, 8G, 14, 12, 12Z, 1T Features Small size and lightweight High reliability Metal glaze thick fi lm resistive element and three layers of electrodes
More informationReference Only. Spec. No. JENF243A Chip Ferrite Bead BLM31KN SH1L Murata Standard Reference Specification [AEC-Q200]
Chip Ferrite Bead BLM31KN SH1L Murata Standard Reference Specification [AEC-Q200] 1. Scope This reference specification applies to Chip Ferrite Bead for Automotive Electronics BLM31KN_SH Series based on
More informationoperating current (*1) (*5) NCU18XH103F60RB 10k±1% 3380±1% Reference Only Thermal Dissipation Constant (mw/ C) (*1)
Chip NTC Thermistor for temperature sensor and temperature compensation 0603 size P / 8.Part Numbering. (ex.) NC U 8 XH 03 F 60 RB Product ID Series Dimensions Temperature Resistance Resistance Individual
More informationDatasheet RS Pro RS Series Axial Carbon Resistor 1kΩ ±5% 2W ppm/ C RS Stock No:
Datasheet RS Pro RS Series Axial Carbon Resistor 1kΩ ±5% 2W -500 +350ppm/ C RS Stock No: 707-8861 Product Details RS Pro axial carbon resistor with ±5% tolerance, provides 1 kω resistance and is power
More informationP 2 / 6 3.Dimensions 1.6± Quantity (Standard Quantity) 0.8± ~ ~ ±0.15 Products quantity in a reel 4,000 pcs./1 reel 1.The
Chip NTC Thermistor for temperature sensor and temperature compensation 0603 size P 1 / 6 1.Part Numbering. (ex.) NC U 18 XH 103 F 60 RB Product ID Series Dimensions Temperature Resistance Resistance Individual
More informationIWLSeries FEATURES APPLICATIONS ORDERING CODE. SMD Wirewound Chip Ferrite Open-Type Inductors (Low Profile) 0805 TRIGON COMPONENTS
SMD Wirewound Chip Ferrite Open-Type s (Low Profile) 0805 CONFIGURATIONS: FEATURES Size Smaller, Lower profile Higher Efficiency due to the lower loss Higher current in compact size Customer design is
More informationReference Only. 2.Part Numbering (ex) NF Z 5B BW 2R9 L N 1 0 L
SpecNo.JENF243J-0011A-01 P1/10 CHIP NOISE FILTER NFZ5BBW LN10 REFERENCE SPECIFICATION 1.Scope This reference specification applies to NFZ5BBW_LN10L Series, Chip Noise Filter. 2.Part Numbering (ex) NF Z
More informationN TC Thermistors. for Temperature Sensor Lead Type. Features. Applications. Temperature Tolerance-Temperature Characteristics
N TC Thermistors for Temperature Sensor Lead Type This product is a sensor type NTC Thermistor to be useful in the normal temperature range developed by the unique ceramic technology and the automatic
More informationReference Only. Chip Ferrite Bead BLM31 SH1L Murata Standard Reference Specification [AEC-Q200]
P.1/9 Chip Ferrite Bead BLM31 SH1L Murata Standard Reference Specification [AEC-Q200] 1. Scope This reference specification applies to Chip Ferrite Bead for Automotive Electronics BLM31_SH Series based
More informationResistance Tolerance Code J. Tol. ± 5% Type. (inches) ERAW (0402) ERAV (0603) ERAS (0805)
42, 63, 85 :, V, S Metal Film Thermosensitive Chip Resistors Features Suitable for temperature correction circuits Temperature coeffi cient value 5 to 39 6 / C High performance Quick response to tem per
More informationReference Only. Chip Ferrite Bead BLM31 SZ1 Murata Standard Reference Specification [AEC-Q200]
P.1/9 Chip Ferrite Bead BLM31 SZ1 Murata Standard Reference Specification [AEC-Q200] 1. Scope This reference specification applies to Chip Ferrite Bead for Automotive Electronics BLM31_SZ Series based
More informationMultilayer Varistors (Automotive Grade)
Multilayer Varistors, Chip Type (Automotive Grade) Series: EZJZ-M, EZJP-M Handling Precautions Safety Precautions Multilayer Varistors for Automotive (hereafter referred to as Varistors ) should be used
More informationMetal (Oxide) Film Resistors
Metal (Oxide) ilm Resistors Metal (Oxide) ilm Resistors Type: ERG(X)S (Small size) (.5,, 2, 3, 5 ) ERG(X) (nti-heat conducting for C) (, 2, 3, 5 ) n eatures l Value Correspondence resistance value range
More informationMaximum. operating. current. Reference Only
Chip NTC Thermistor for temperature sensor and temperature compensation 020 size P /. Part Numbering. (ex.) NC P 03 XH 03 F 05 RL Product ID Series Dimensions Temperature Resistance Resistance Individual
More informationReference Only. DC Resistance Impedance at 100MHz (mω) Rated Current *1 MURATA (A) Part Number. (Ω) Tolerance Typ. Max.
Spec No. JENF243J-0002B-01 P1/8 CHIP NOISE FILTER NFZ2MSM SN10L REFERENCE SPECIFICATION 1. Scope This reference specification applies to NFZ2MSM_SN10L, Chip Noise Filter.. 2. Part Numbering (ex) NF Z 2M
More informationChip NTC Thermistor for temperature sensor and temperature compensation 0402 size
P 1 / 8 Chip NTC Thermistor for temperature sensor and temperature compensation 0402 size 1. Part Numbering 2.Ratings 2.1 F SERIES (ex.) NC P 15 XH 103 J 03 RC Product ID Series Dimensions Temperature
More informationChip NTC Thermistor for temperature sensor and temperature compensation 0805 size
P 1 / 6 Chip NTC Thermistor for temperature sensor and temperature compensation 0805 size 1. Part Numbering (ex.) NC P 21 XV 103 J 03 RA Product ID Series Dimensions Temperature Resistance Resistance Individual
More informationMaximum. operating. current. (*1) (*5) NCP15XH103F03RC 10k±1% 3380±1% Reference Only
Chip NTC Thermistor for temperature sensor and temperature compensation 0402 size P 1 / 10 1.Part Numbering. (ex.) NC P 15 XH 103 F 03 RC Product ID Series Dimensions Temperature Resistance Resistance
More informationReference Only. SpecNo.JELF243A-0030T-01 P1/8
SpecNo.JELF243A-0030T-01 P1/8 CHIP COIL (CHIP INDUCTORS) LQH32CN 53L REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQH32CN_53 Series, Chip coil (Chip Inductors). 2. Part Numbering
More informationCeramic PTC Thermistor: PSB Series
Features. RoHS compliant 2. Voltage ratings: 40V ac to 560V ac 3. Resistance range:0~00ω 4. Stable over a long life 5. Operating temperature range: -0 ~ +85 C (V=Vmax) -25 ~ +25 C (V=0) 6. Agency recognition:
More informationReference Only. *B:Bulk packing also available. Inductance DC Resistance ( m ohm)
P.1/9 CHIP COIL (CHIP INDUCTORS) LQM18PN FHD REFERENCE SPECIFICATION 1.Scope This reference specification applies to LQM18PN_FH series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 18 P N 2R2
More informationReference Only. (8)Numbers of Circuit. Impedance. (at 100MHz, Under Standard Testing Condition) 33±25%
P.1/9 Chip Ferrite Bead BLM31 SN1 Reference Specification 1. Scope This reference specification applies to Chip Ferrite Bead BLM31_SN Series. 2. Part Numbering (ex.) BL M 31 PG 601 S N 1 L (1) (2) (3)
More informationPosistor for over current protection PRG SERIES BC-E0273H PRG21BC***MM1RA SERIES
Posistor for over current protection PRG SERIES BC-E0273H PRG21BC***MM1RA SERIES 1.Part Numbering ex) PR G 21 BC 0R2 M M1 RA C Product ID Series Dimensions Temperature Resistance Resistance Individual
More informationCeramic PTC Thermistor: PSB Series
Features. RoHS compliant 2. Voltage ratings: 40V ac to 560V ac 3. Resistance range:0~00ω 4. Stable over a long life 5. Operating temperature range: -0 ~ +85 C (V=Vmax) -25 ~ +25 C (V=0) 6. Agency recognition:
More informationImpedance ( ) (at 100MHz)(*1) (refer to below comment)
Reference Spec.No.JENF243A-9118D-01 P1/10 Chip Ferrite Bead BLM15 SZ1D Murata Standard Reference Specification [AEC-Q200] 1.Scope This reference specification applies to Chip Ferrite Bead BLM15_SZ series
More informationResistance Tolerance Code F J. Tolerance ± 1% ± 5% Jumper
42, 63, 85, 126, 121, 1812, 21, 2512 : ERJ S2, S3, S6, S8, S14 S12, S1D, S1T Anti-Sulfurated Thick ilm Chip Resistors eatures Special construction to avoid open failure due to the presence of sulfur High
More informationReference Only. SpecNo.JELF243A-0041N-01 P1/10
SpecNo.JELF243A-0041N-01 P1/10 CHIP COIL(CHIP INDUCTORS)LQH32MN 23L REFERENCE SPECIFICATION 1.Scope This reference specification applies to LQH32MN Series, Chip coil (Chip Inductors). 2.Part Numbering
More informationReference Only. 1. Scope This reference specification applies to Wire Wound Chip Common Mode Choke Coil DLW5AT_SQ Series.
Spec No. JEFL243C 0017H-01 P 1/10 Wire Wound Chip Common Mode Choke Coil DLW5ATN SQ2 Reference Specification 1. Scope This reference specification applies to Wire Wound Chip Common Mode Choke Coil DLW5AT_SQ
More informationReference Only. Spec. No. JENF243A-0021P-01. GHz Noise Suppression Chip Ferrite Bead BLM18EG N1 Reference Specification
GHz Noise Suppression Chip Ferrite Bead BLM18EG N1 Reference Specification 1. Scope This reference specification applies to Chip Ferrite Bead BLM18EG_ N Series. P.1/8 2. Part Numbering (ex.) BL M 18 EG
More informationReference Only. Spec. No. JENF243D-0003J-01 P1/ 8
Spec. No. JENF243D-0003J-01 P1/ 8 Chip EMIFIL LC Combined Monolithic NFL18SP X1A3 Reference Specification 1. Scope This reference specification applies to Chip EMIFIL LC Combined Monolithic Type NFL18SP
More informationReference Only. This reference specification applies to Wire Wound Chip Common Mode Choke Coil.
Spec. No. JEFL243C-0025G-01 P 1/10 Wire Wound Chip Common Mode Choke Coil DLW5BTM TQ2 Reference Specification 1. Scope This reference specification applies to Wire Wound Chip Common Mode Choke Coil. 2.
More informationPosistor for over current protection PRG SERIES BC-E0272I PRG18BC***MM1RB SERIES
Posistor for over current protection PRG SERIES BC-E0272I PRG18BC***MM1RB SERIES 1.Part Numbering ex) PR G 18 BC 1R0 M M1 RB C Product ID Series Dimensions Temperature Resistance Resistance Individual
More informationGW5xxC15Lx2. Light Emitting Diode Module. GW5xxC15Lx2. Part Numbering. Agency Approvals/Compliance. Applications
GW5xxC15Lx2 Light Emitting Diode Module Part Numbering Letters Emission Color Part Number BW Normal White GW5BWC15L02 BD Tungsten GW5BDC15L02 BN BN High Color Rendering (5,000 K) High Color Rendering (6,500
More informationReference Only. SpecNo.JELF243A-0122C-01 P1/8. Inductance DC Resistance Self. Tolerance (%)
SpecNo.JELF243A-0122C-01 P1/8 CHIP COIL(CHIP INDUCTORS) LQH5BPN 38 REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQH5BP_38 Series, Chip coil (Chip Inductors). 2. Part Numbering
More informationSn-Pb plating or Tin plating
2/14 Unit mm L a a Code letter Dimension L 2..2 W 1.25.2 W t a b.4.1.4.2.4.2 t b b Fig.1 Construction and dimensions NOTE : Resistive element Electrode Protective coat Substrate Nichrome alloy thin film
More informationChip radial type NTC thermistor
Chip radial type NTC thermistor 1. Part Numbering (Part Number) NXR T 15 XM 202 E A 1 B 010 Product ID Individual Chip Temperature Resistance Resistance Lead wire Lead wire Packaging Dimensions specifications
More informationReference Only. Marked three digits system.(ex. 270pF 271) 8 Lead Type
Spec No. JENF243F-0018K-01 P1/11 Disc-Type EMIFIL (A miniature three-terminal capacitor) DSS6N 1.Scope This reference specification applies to DSS6N series. 2.Part Numbering (Ex.) DS S 6 N B3 2A 271 Q93
More informationReference Only. D:Taping(φ180mm Reel, Paper Tape) L:Taping(φ180mm Reel, Plastic Tape) B:Bulk
Total page 2/16 P.1/10 Chip Ferrite Bead BLM21 N1 Reference Specification 1. Scope This reference specification applies to Chip Ferrite Bead BLM21_ N Series. 2. Part Numbering (ex.) BL M 21 AG 121 S N
More informationReference Only. Spec. No. JENF243D-0006K-01 P 1/ 8
Spec. No. JENF243D-0006K-01 P 1/ 8 Chip EMIFIL LC Combined Monolithic NFL21SP X1C Reference Specification 1. Scope This reference specification applies to Chip EMIFIL LC Combined Monolithic Type NFL21S
More informationReference Only. Spec. No. JENF243E-0003Q-01 P 1 / 8. Chip EMIFIL LC Combined Type for Large Current NFE61PT 1H9 Reference Specification
Spec. No. JENF243E-0003Q-01 P 1 / 8 Chip EMIFIL LC Combined Type for Large Current NFE61PT 1H9 Reference Specification 1. Scope This reference specification applies to Chip EMIFIL LC Combined Type for
More informationReference Only. Chip Ferrite Bead BLM18 (B/J)H1D Murata Standard Reference Specification [AEC-Q200]
Chip Ferrite Bead BLM18 (B/J)H1D Murata Standard Reference Specification [AEC-Q200] P.1/10 1.Scope This reference specification applies to Chip Ferrite Bead for Automotive Electronics BLM18_(B/J)H Series
More informationReference Only. Spec. No. JENF243A-9113E-01. Chip Power Bead BLE32PN SZ1L Murata Standard Reference Specification [AEC-Q200]
Chip Power Bead BLE32PN SZ1L Murata Standard Reference Specification [AEC-Q200] P.1/9 1. Scope This reference specification applies to Chip Power Bead for Automotive Electronics BLE32PN_SZ Series based
More informationPTC thermistors for overcurrent protection
PTC thermistors for overcurrent protection Leaded disks, coated, 380 V, 500 V Series/Type: Date: March 2006 B59884, B59885, B59886 EPCOS AG 2006. Reproduction, publication and dissemination of this publication,
More informationReference Only. GHz Noise Suppression Chip Ferrite Bead BLM15E SN1 Reference Specification
GHz Noise Suppression Chip Ferrite Bead BLM15E SN1 Reference Specification P.1/9 1.Scope This reference specification applies to Chip Ferrite Bead BLM15E_SN series. 2.Part Numbering (ex.) BL M 15 EG 121
More informationR-Series. Lead Wire Length (H, mm)
Carbon Film Fixed Resistor Specifications Per I E C 6 0 1 1 5-1, I E C 6 0 1 1 5-4 d L H D MIL-R-10509 Features Conformal multi-layer coating (flame proof coating available) Color code per MIL & EIA standards
More informationReference Only. This reference specification applies to Chip Ferrite Bead Array BLA31 Series used for electronic machinery. (8)Numbers of Circuit
Spec. No. JENF243A 0008N-01 P 1 / 9 1. Scope Chip Ferrite Bead Array BLA31SN4 Reference Specification This reference specification applies to Chip Ferrite Bead Array BLA31 Series used for electronic machinery.
More informationReference Only. Common Mode Impedance Rated (at 100MHz,Under Standard Voltage Testing Condition) V(DC) (Ω ) 67 ± 25 %
Spec No.JEFL243C-0010P-01 P1/9 Chip Common Mode Choke Coil DLW21SN HQ2 Reference Specification 1. Scope This reference specification applies to Chip Common Mode Choke Coil DLW21SN_HQ Series. 2. Part Numbering
More informationKING CORE ELECTRONICS INC. Tel: Fax: Web Site:
RELIABILITY TEST - WCM SERIES ITEM SPECIFICATION TEST CONDITION Soldering heat resistance The chip shall not be cracks. More than 75% of terminal electrode shall be covered with solder. Impedance: within±20%
More informationReference Only. Reference Spec.No.JENF243A-9103H-01 P1/8. Chip Ferrite Bead BLM15 SH1D Reference Specification [AEC-Q200]
Reference Spec.No.JENF243A-9103H-01 P1/8 Chip Ferrite Bead BLM15 SH1D Reference Specification [AEC-Q200] 1.Scope This reference specification applies to Chip Ferrite Bead BLM15_SH series for Automotive
More informationMaximum. operating. current. (*1) (*5) NCP18XH103F03RB 10k±1% 3380±1% Reference Only
Chip NTC Thermistor for temperature sensor and temperature compensation 0603 size P / 0.Part Numbering. (ex.) NC P 8 XH 03 F 03 RB Product ID Series Dimensions Temperature Resistance Resistance Individual
More informationReference Only. Spec No. JENF243G-0003E-01 P 1 / 6
Spec No. JENF243G-0003E-01 P 1 / 6 1.Scope Ferrite Bead Inductor BL01RN1A Reference Specification This reference specification applies Ferrite Bead Inductor. 2.Part Numbering (Ex.) BL 01 RN 1 A1 F 1 A
More informationReference Only. Spec.No.JENF243A-0034J-01 P1/8
Spec.No.JENF243A-0034J-01 P1/8 Chip Ferrite Bead BLM03H N1 Reference Specification 1.Scope This reference specification applies to Chip Ferrite Bead BLM03H N Series. 2.Part Numbering (ex.) BL M 03 HG 601
More informationReference Only. Impedance (Ω) (at 100MHz,Under Standard Testing Condition) Typical 22±25% min ±25% ±25% ±25% ±25% 70
Total page 2/16 P.1/11 Chip Ferrite Bead BLM21 N1 Reference Specification 1. Scope This reference specification applies to Chip Ferrite Bead BLM21_ N Series. 2. ing (ex.) BL M 21 AG 121 S N 1 D (1) (2)
More informationAnti-Pulse Thick Film Chip Re sis tors 0805, 1206, 1210
Anti-Pulse Thick Film Chip Re sis tors 85, 26, 2 : ER T6, T8, T4 Features Anti-Pulse characteristics High pulse characteristics achieved by the optimized trimming specifi cations High reliability Metal
More informationReference Only. Spec. No. JENF243E-0002Q-01 P1 / 8
Spec. No. JENF243E-0002Q-01 P1 / 8 Chip EMIFIL LC Combined Type for Large Current NFE31PT 1E9 Reference Specification 1. Scope This reference specification applies to Chip EMIFIL LC Combined Type for Large
More informationReference Only. Spec No. JELF243A-9134D-01 P1/8
Spec No. JELF243A-9134D-01 P1/8 CHIP COIL(CHIP INDUCTORS)LQH2MPZ GRL SPECIFICATION Murata Standard Reference Specification AEC-Q200 1. Scope This reference specification applies to LQH2MPZ_GR Series, Chip
More informationPTC thermistors for degaussing
PTC thermistors for degaussing Series/Type: B59*** Date: March 2006 EPCOS AG 2006. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein
More informationAnti-Surge Thick Film Chip Re sis tors 0603, 0805, 1206, 1210
Anti-Surge Thick Film Chip Re sis tors 63, 85, 126, 121 : P3, P6, P8, P14 Features Anti-Surge characteristics superior to standard metal fi lm resistors High reliability Metal glaze thick fi lm resistive
More informationPTC thermistors for telecom
PTC thermistors for telecom Series/Type: Date: October 2006 EPCOS AG 2006. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without
More informationReference Only. GHz Noise Suppression Chip Ferrite Bead BLM15H SN1 Reference Specification
Spec.No.JENF243A-0024L-01 P1/9 GHz Noise Suppression Chip Ferrite Bead BLM15H SN1 Reference Specification 1.Scope This Reference Specification applies to Chip Ferrite Bead BLM15H_SN series. 2.Part Numbering
More informationPTC thermistors for degaussing
PTC thermistors for degaussing Series/Type: B59*** Date: March 2006 EPCOS AG 2006. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein
More informationNTC Thermistors. Mounting instructions. Date: January 2018
NTC Thermistors Mounting instructions Date: January 2018 EPCOS AG 2018. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without
More informationPosistor for over heat sensing PRF SERIES PRF15**102R SERIES
Posistor for over heat sensing PRF SERIES PRF15**102R SERIES BC-E0268D 1.Part Numbering ex) PR F 15 AR 102 R B6 RC C Product ID Series Dimensions Temperature Resistance Resistance Individual Packaging
More informationNTC thermistors for temperature measurement
NTC thermistors for temperature measurement Series/Type: Date: March 2006 EPCOS AG 2006. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained
More informationP 2 / Resistance - Temperature Characteristic (typical curve) : AR 1000 Resistance e Charac(R/R25)
P 1 / Posistor For Circuit Protection 1. Part Numbering (Part Number) PT GL 09 AR 390 N 0B52 A0 Product ID Series Dimensions Temperature Characteristics Resistance Resistance Tolerance Individual Specifications
More informationReference Only. Spec No. JELF243B-9102E-01 P.1 / 9
Spec No. JELF243B-9102E-01 P.1 / 9 CHIP COIL (CHIP INDUCTORS) LQG18HH 00D SPECIFICATION Murata Standard Reference Specification [AEC-Q200] 1. Scope This reference specification applies to LQG18HH_00 series
More informationNTC thermistors for temperature measurement
NTC thermistors for temperature measurement Series/Type: Date: March 2006 EPCOS AG 2006. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained
More informationReference Only. Rated Voltage V(DC) Common Mode Inductance (Under Standard Testing Condition) 11uH (-30%/+50%) at 0.1MHz. 22uH (-30%/+50%) at 0.
Spec No. JEFL243C-9101M-01 P1/9 Wire Wound Chip Common Mode Choke Coil DLW43SH XK2 Murata Standard reference Specification [AEC-Q200] 1. Scope This reference specification applies to Wire Wound Chip Common
More informationM16 M20 M25 M207 M51 M100 M200
Metal Film Fixed Resistor Specifications Per IEC 60115-1 MIL-R-10509 d L H D Features Conformal multi-layer coating Color code per MIL & EIA standards Special tin-plated electrolytic copper lead wire Products
More information5.Rated value. 6.Package. No.JEMCP B. Section 7.1 (-55 to 125 C / -55 to 125 C) 1000MΩmin pf NFM3DPC223R1H3L ±20 % DC 50 V
No.JEMCP0-010856B CHIP EMIFIL CHIP 3-TERMINAL CAPACITOR FOR LARGE CURRENT FOR GENERAL NFM3DP Series Reference Sheet 1.Scope This product specification is applied to Chip EMIFIL Chip 3-terminal Capacitor
More information5.Rated value No.JEMCP B MURATA PART NO. (3) Nominal Capacitance Capacitance Tolerance (5) Rated Voltage Rated Current (ma) DC Resistance Insul
No.JEMCP0-010871B CHIP EMIFIL CHIP 3-TERMINAL CAPACITOR FOR LARGE CURRENT NFM41PC155 Series Reference Sheet 1.Scope This product specification is applied to Chip EMIFIL Chip 3-terminal Capacitor for Large
More informationSelf-protecting power resistors
Series/Type: B5920* Date: June 2008 EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express
More informationfilename: B57703M0502A004_1 RT-curve on page 3 corrected Date of confirmation of specification by EPCOS:
Series/Type: Ordering code: Date: 2007-10-02 Version: 1 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the color
More informationImpedance at 1MHz. (Ω) Tolerance (Ω) Tolerance
SpecNo.JENF243J-0003D-01 P1/8 CHIP NOISE FILTER NFZ32BW HN11L REFERENCE SPECIFICATION 1. Scope This reference specification applies to NFZ32BW_HN11L Series, Chip Noise Filter. 2. Part Numbering (ex) NF
More informationPTC thermistors. Limit temperature sensors, probe assemblies. Date: March 2006
PTC thermistors Limit temperature sensors, probe assemblies Series/Type: B59901 Date: March 2006 EPCOS AG 2006. eproduction, publication and dissemination of this publication, enclosures hereto and the
More informationPTC thermistors. Limit temperature sensors, probe assemblies. Date: March 2006
PTC thermistors Limit temperature sensors, probe assemblies Series/Type: B59801 Date: March 2006 EPCOS AG 2006. eproduction, publication and dissemination of this publication, enclosures hereto and the
More informationNTC thermistors for temperature measurement
NTC thermistors for temperature measurement Series/Type: Date: March 2006 EPCOS AG 2006. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained
More information