SAFETY DATA SHEETS ( SDS)

Transcription

1 SAFETY DATA SHEETS ( SDS) SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION Product Name: Manufacturer Name: Address: Website: BONDED ABRASIVE PRODUCTS Grinding and Cutting Wheels: (Type 1, Type 27, Type 28, Type 29), Cup Wheels (Type 11), Plugs & Cones: (Type 16, 17, 18R), Mounted Point Wheels; Bench Grinding Wheels Forney SKUs: 71217, 71219, 71772, 71774, 71775, 71781, 71782, 71783, 71786, 71788, 71791, 71793, 71797, 71798, 71799, 71800, 71801, 71802, 71807, 71814, 71815, 71840, 71841, 71842, 71843, 71844, 71845, 71846, 71847, 71848, 71849, 71850, 71854, 71855, 71856, 71857, 71860, 71864, 71865, 71866, 71872, 71874, 71892, 72318, 72351, 72352, 72355, 72356, Forney Industries, Inc Vermont Drive, Fort Collins, CO USA customerservice@forneyind.com Phone Number: ; EMERGENCY PHONE NUMBER: Fax Number: SDS Creation Date: SECTION 2 - HAZARDS IDENTIFICATION April 1st Revised 12/15/2016 Inhalation, Acute: Inhalation, Chronic: Skin: Eye: Other Potential Risks: Dust Inhalation may cause coughing, shortness of breath or irritation. Dust Inhalation may affect breathing capacity. No known adverse effects, but ingestion not recommended. Not absorbed through skin. Dust may cause irritation/rash to some. Dust may irritate eyes. Grinding may create elevated sound levels, which may affect hearing and may aggravate pre-existing respiratory condition. SECTION 3 - COMPOSITION/INFORMATION ON INGREDIENTS INGREDIENTS & CHEMICAL IDENTITY (COMMON NAME): 1 * Aluminum Oxide (Alumina) 2 * Silicon Carbide (Crystolon) 3 * Phenol Formaldehyde (Phenolic Resin) 4 * Sodium Fluoaluminate (Cryolite) 5 * Fiborous Glass (Fiberglass) 6 * Zirconium Oxide 7 * Iron Pyrite 8 * Sulfur 9 * Calcium Oxide 10 * Iron Oxide 11 * Graphite 12 * Potassium Flouroborate CAS # % % - 95% % - 90% Non-established % - 30% 0% - 20% 0% - 20% %-80% %-20% %-15% % - 10% %-5% %-5% %-5% Date of issue: 04/01/2014 1

2 SECTION 4 - FIRST AID MEASURES Eye Contact: Skin Contact: Inhalation: Immediately flush eyes with water for at least 15 to 20 minutes. Make sure the dust is completely washed off. Get medical attention, if irritation symptoms develop or persist. Wash skin with soap and rinse plenty of water. Get medical attention if irritation symptoms develop or persist. Remove affected person to fresh air. Apply artificial respiration if necessary. Seek medical assistant if affected person is still having trouble breathing. If accidentally ingested, contact physician for medical attention. SECTION 5 - FIRE FIGHTING MEASURES Flammable Property: Flash Point: Flammable limit: LEL: UEL: Extinguishing Media: Non-flammable Extinguisher and Water SECTION 6 - ACCIDENTAL RELEASE MEASURES Step to be taken in case of leaks or spills: Waste disposal method: Ventilate area. Normal clean-up procedures. Avoid creating dusty conditions. Dispose-of in a secured sanitary landfill consistent with applicable Federal, State and Local Laws and Regulations SECTION 7 - HANDLING AND STORAGE Handling: Storage: General Hygiene Practices: Handle with adequate ventilation (See OSHA 29CFR Ventilation) and 29CFR (Air Contaminates) Store in dry area, away from heat source. Ideal storage temperature F (18-24 C), 50-60% RM Wear proper gloves, eye and face protection. Date of issue: 04/01/2014 2

3 SECTION 8 - EXPOSURE CONTROL / PERSONAL PROTECTION HAZARDOUS COMPONENT 1 * Aluminum Oxide (Alumina) 2 * Silicon Carbide (Crystolon) OSHA PEL respirable, 1 total dust ACGIH TLV 1mg/m3 respirable 10 mg/m3 inhalable, 3mg/m3 respirable 3 * Phenol Formaldehyde (Phenolic Resin) 4 * Sodium Fluoaluminate (Cryolite) 5 * Fiborous Glass (Fiberglass) 2.5 mg/m3 2.5 mg/m3 1 total dust, respirable 10mg/cu.m total dust, respirable 6 * Zirconium Oxide 7 * Iron Pyrite 8 * Sulfur 9 * Calcium Oxide 10 * Iron Oxide 11 * Graphite 12 * Potassium Flouroborate 10mg/m3 15mppcf 2. 10mg/m3 Stel 2mg/m3 respirable 2mg/m3 repirable 2. Repiratory Protection: Specify Type, as needed. For Approved Dust Respirators, See OSHA 29CFR Eye and Face Protection: Always wear safety glasses. Recommended - See OSHA 29 CFR and ANSI Z87.1 Hearing Protection: Hearing Protection as needed. OSHA 29CFR Skin and Hand Protection: Wear glove and Lab coat. Local Exhaust : Required to keep dust levels below permissible exposure limits. Mechanical: Required to keep dust levels below permissible exposure limits. SECTION 9 - PHYSICAL and CHEMICAL PROPERTIES Physical Sate Appreance: Solid Melting Point: Flammability: Non-flamable Solubility: non-soluble Ordor: Odorless Initial Boining Point: Vapor Pressure: Flash Point: Vapor desity: Evaporation Rate: ph: Auto-ignition tempurature: Not determimed Relative density: Decomposition Tempurature & viscosity: Date of issue: 04/01/2014 3

4 SECTION 10 - STABILITY and REACTIVITY Hazardous Polymerization: Stability: Condition to avoid: Hazarous decompositon: Hazardous polymerization does not occur under normal condition and usage. Stable under normal condition. Unspecified. Dust from grinding could contain ingredients listed in seciton 3 and other, potentially more hazardous components of the base material being ground or coatings applied to the base material. SECTION 11 - TOXICOLOGICAL INFORMATION Acute Toxicity: Inhalation: Skin: Eye: Other Potential Risks: Carcinogenicity: This product has not been tested for its toxicity. If accidentally ingested, contact physician for medical attention. Dust inhalation may cause coughing, shortness of breath or irritation. Not absorbed through skin. Dust may cause irritation/rash to some. Dust may irritate eyes. Grinding may create elevated sound levels, which may affect. hearing and may aggravate pre-existing respiratory condition. Silica, Amorphous, Fused - IARC-3, NIOSE-X LD50/LC50 Values are not appropriate or available. SECTION 12 - ECOLOGICAL INFORMATION Ecotoxicity: Environmental effects: No ecotoxicity data was found for the product. No known significant effects or hazards. SECTION 13 - DISPOSAL CONSIDERATIONS Waste Disposal Method: Dispose-of in a secured sanitary landfill consistent with applicable Federal, State and Local Laws and Regulations. SECTION 14 - TRANSPORT INFORMATION DOT Shipping Name: DOT UN Number: Transport hazard class: Packing Group Number: Environmental Hazard: label Required: Date of issue: 04/01/2014 4

5 SECTION 15 - REGULATORY INFORMATION HCS Classification: U.S. Federal Regulations: This product is Exempted from the regulatory requirement HCS SARA 311/312 Hazardous Substances: Not Applicable EPA TSCA Inventory: All of the ingrediennts are listed California Proposition 65: WARNING: Dust generated from cut, sand, drill or grind materials such as wood, paint, cement, masonry or metal when using this product offen contains chemicals known to cause cancer, birth defects, or other reproductive harm. Canadian WHMIS Classification: Not a controlled product. This product meets the definition of a "manufactured article" under the WHMIS regulations. Canadian CEPA: toxic substances. All of the ingredients are listed on the Canadian DSL. SECTION 16 - OTHER INFORMATION Label Requirement: Hazadous Material Information System (USA) Not controlled under O.S.H.A and under W.H.M.S. when used according to Industry safety standard. Hazard Ratings 4- Extreme 3- Serious 2- Moderate 1- Slight 0- Minimal National Fire Protection Association References: ANSI B7.1 and O.S.H.A regulations Date this revision: 12/15/2016 Rev. 2.1 Prepared By: Forney Industries, Inc. Notice to reader The information and recommendations set forth herein are taken from sources believed to be accurate. However, Forney Industries, Inc. makes No Warranty with respect to accuracy of the information or the suitability of the recommendations, and assumes No Liability to any user thereof. Date of issue: 04/01/2014 5