Material Safety Data Sheet

Transcription

1 Prin labe NOHSC 16 Section Material Safety Data Sheet EQUILIBRIUM CATALYST Infosafe No. AC99E Issue Date September 2010 Status ISSUED by CALTEX BS: Not classified as hazardous according to criteria of NOHSC 1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name EQUILIBRIUM CATALYST Product Code Company Name Caltex Australia Petroleum Pty Ltd (ABN ) Address 2 Market Street, Sydney NSW 2000 Emergency Tel Telephone/Fax Number Tel: (02) Fax: (02) Recommended Use Catalytic cracker catalyst. Other Names Name Product Code ECAT SPENT FCC CAT SPENT FCC CATALYST BLACK CAT file:///c /Documents%20and%20Settings/greg/Desktop/infosafe-import/msdsview.asp_763.html (1 of 11) [13/12/2011 2:50:15 AM]

2 Other Information The most recent MSDS for this product can be obtained from the Caltex Australia website - ' 2. HAZARDS IDENTIFICATION Hazard Classification NON-HAZARDOUS SUBSTANCE. NON-DANGEROUS GOODS. Hazard classification according to the criteria of NOHSC. Dangerous goods classification according to the Australia Dangerous Goods Code. Safety Phrase (s) S22 Do not breathe dust. 3. COMPOSITION/INFORMATION ON INGREDIENTS Ingredients Name CAS Proportion Vanadium % pentoxide Magnesium oxide % Carbon <0.2 % Lead Compounds <0.02 % Copper compounds <0.01 % Nickel compounds <0.5 % Antimony and <0.2 % compounds Iron oxide fume <1 % (Fe2O3), (as Fe) Zeolite % Amorphous silica % Kaolin % Rare earth oxide 1-5 % Aluminium Oxide % file:///c /Documents%20and%20Settings/greg/Desktop/infosafe-import/msdsview.asp_763.html (2 of 11) [13/12/2011 2:50:15 AM]

3 Aluminatesilicate % Aluminium Phosphate % 4. FIRST AID MEASURES Inhalation Ingestion Skin Eye First Aid Facilities Advice to Doctor Other Information If inhaled, remove affected person from contaminated area. Keep at rest until recovered. If symptoms persist seek medical attention. Do not induce vomiting. Wash out mouth thoroughly with water. If symptoms develop seek medical attention. If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water. If symptoms develop seek medical attention. If in eyes, hold eyelids apart and flush the eye continuously with running water. Continue flushing until advised to stop by the Poisons Information Centre or a doctor, or for at least 15 minutes. Seek immediate medical attention. Eyewash and normal washroom facilities. Treat symptomatically. For advice in an emergency, contact a Poisons Information Centre (Phone Australia ) or a doctor at once. 5. FIRE FIGHTING MEASURES Suitable Extinguishing Media Use appropriate fire extinguisher for surrounding environment. file:///c /Documents%20and%20Settings/greg/Desktop/infosafe-import/msdsview.asp_763.html (3 of 11) [13/12/2011 2:50:15 AM]

4 Hazards from Combustion Products Non combustible material Specific Hazards Precautions in connection with Fire This product is non combustible. Fire fighters should wear Self-Contained Breathing Apparatus (SCBA) operated in positive pressure mode and full protective clothing to prevent exposure to vapours or fumes. 6. ACCIDENTAL RELEASE MEASURES Emergency Procedures Increase ventilation. Evacuate all unprotected personnel. Wear sufficient respiratory protection and full protective clothing to prevent exposure. Sweep up material avoiding dust generation or dampen spilled material with water to avoid airborne dust, then transfer material to a suitable container. Wash surfaces well with soap and water. Seal all wastes in labelled plastic containers for subsequent recycling or disposal. Dispose of waste according to the applicable local and national regulations. If contamination of sewers or waterways occurs inform the local water and waste management authorities in accordance with local regulations. 7. HANDLING AND STORAGE Precautions for Safe Handling Use only in a well ventilated area. Keep containers sealed when not in use. Prevent the build up of dust in the work atmosphere. Avoid inhalation of dust, and skin or eye contact. Maintain high standards of personal hygiene i.e. Washing hands prior to eating, drinking, smoking or using toilet facilities. file:///c /Documents%20and%20Settings/greg/Desktop/infosafe-import/msdsview.asp_763.html (4 of 11) [13/12/2011 2:50:15 AM]

5 Conditions for Safe Storage Store in a cool, dry, well-ventilated area, out of direct sunlight and moisture. Store in labelled, corrosionresistant containers. Keep containers tightly closed. Store away from bases, water and other incompatible materials. Ensure that storage conditions comply with applicable local and national regulations. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION National Exposure Standards No exposure value assigned for this specific material by the National Occupational Health and Safety Commission (NOHSC), Australia. However, the available exposure limits for ingredients are listed below: National Occupational Health And Safety Commission (NOHSC), Australia Exposure Standards: Substance Dust TWA STEL ppm mg/m³ ppm mg/m³ Magnesium oxide Vanadium pentoxide Nickel compounds Antimony compounds Iron oxide Lead compounds Copper compounds Dust (not otherwise specified) TWA (Time Weighted Average): The average airborne concentration of a particular substance when calculated over a normal eight-hour working day, for a five-day week. STEL (Short Term Exposure Limit): The average airborne concentration over a 15 minute period which should not be exceeded at any time during a normal eight-hour workday. Biological Limit Values Engineering Controls No biological limits allocated. Provide sufficient ventilation to keep airborne levels below the exposure limits. Where dust is generated, particularly in enclosed areas, and natural ventilation is inadequate, a local exhaust ventilation system is required. file:///c /Documents%20and%20Settings/greg/Desktop/infosafe-import/msdsview.asp_763.html (5 of 11) [13/12/2011 2:50:15 AM]

6 Respiratory Protection If engineering controls are not effective in controlling airborne exposure then an approved respirator with a replaceable dust/particulate filter should be used. Reference should be made to Australian/New Zealand Standards AS/NZS 1715, Selection, Use and Maintenance of Respiratory Protective Devices; and AS/NZS 1716, Respiratory Protective Devices, in order to make any necessary changes for individual circumstances. Eye Protection Safety glasses with side shields or chemical goggles should be worn. Final choice of appropriate eye/face protection will vary according to individual circumstances. Eye protection devices should conform with Australian/New Zealand Standard AS/NZS Eye Protectors for Industrial Applications. Hand Protection Wear gloves of impervious material. Final choice of appropriate gloves will vary according to individual circumstances i.e. methods of handling or according to risk assessments undertaken. Reference should be made to AS/NZS : Occupational protective gloves - Selection, use and maintenance. Body Protection Suitable protective work wear, e.g. cotton overalls buttoned at neck and wrist is recommended. Chemical resistant apron is recommended where large quantities are handled. Industrial clothing should conform to the specifications detailed in AS/NZS 2919: Industrial clothing. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Odour Melting Point Boiling Point Solubility in Water Free flowing, off-white powder >1200 C Insoluble file:///c /Documents%20and%20Settings/greg/Desktop/infosafe-import/msdsview.asp_763.html (6 of 11) [13/12/2011 2:50:15 AM]

7 Specific Gravity ph Value Vapour Pressure Vapour Density (Air=1) Density Apparent bulk density: 0.85 Flash Point Flammability Auto-Ignition Temperature Flammable Limits - Lower Flammable Limits - Upper Particle Size Non-combustible material microns 10. STABILITY AND REACTIVITY Chemical Stability Conditions to Avoid Incompatible Materials Hazardous Decomposition Products Stable under normal conditions of storage and handling. file:///c /Documents%20and%20Settings/greg/Desktop/infosafe-import/msdsview.asp_763.html (7 of 11) [13/12/2011 2:50:15 AM]

8 Hazardous Polymerization Will not occur. 11. TOXICOLOGICAL INFORMATION Toxicology Information Inhalation Ingestion Skin Eye No toxicity data available for this material. The available acute toxicity data for the ingredients are as follows: Acute toxicity data for Antimony: LD50 (Oral, Rat): 100 mg/kg Acute toxicity data for Carbon: LD50 (Oral, Rat): >5 gm/kg Inhalation of dusts may irritate the respiratory system. Ingestion of this product may irritate the gastric tract causing nausea and vomiting. Skin contact may cause mechanical irritation resulting in redness and itching. Eye contact may cause mechanical irritation. May result in mild abrasion. Chronic Effects 12. ECOLOGICAL INFORMATION Ecotoxicity Persistence / Degradability Mobility Environment Protection No ecological data are available for this material. Prevent this material entering waterways, drains and sewers. 13. DISPOSAL CONSIDERATIONS file:///c /Documents%20and%20Settings/greg/Desktop/infosafe-import/msdsview.asp_763.html (8 of 11) [13/12/2011 2:50:15 AM]

9 Disposal Considerations The disposal of the spilled or waste material must be done in accordance with applicable local and national regulations. 14. TRANSPORT INFORMATION Transport Information Road and Rail Transport (ADG Code): Not classified as Dangerous Goods according to the Australian Code for the Transport of Dangerous Goods by Road and Rail (ADG Code) (7th edition). Marine Transport (IMO/IMDG): Not classified as Dangerous Goods by the criteria of the International Maritime Dangerous Goods Code (IMDG Code) for transport by sea. Air Transport (ICAO/IATA): Not classified as Dangerous Goods by the criteria of the International Air Transport Association (IATA) Dangerous Goods Regulations for transport by air. 15. REGULATORY INFORMATION Regulatory Information Poisons Schedule Not classified as Hazardous according to criteria of National Occupational Health & Safety Commission (NOHSC), Australia. Classified as a Scheduled Poison according to the Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP). S6 16. OTHER INFORMATION file:///c /Documents%20and%20Settings/greg/Desktop/infosafe-import/msdsview.asp_763.html (9 of 11) [13/12/2011 2:50:15 AM]

10 Date of preparation or last revision of MSDS Addition to transport section: November 2011 MSDS Reviewed: September 2010 Supersedes: December 2005 Contact Person/ CHEMICAL EMERGENCIES: Point TECHNICAL ADVICE: Health & Safety Advisor Tel: (02) and (02) PLEASE NOTE that although every care has been taken in compiling the above information, it is solely reliant upon data available to us at the date hereof. We believe the data to be correct, however for the reason just stated we are not in a position to warrant its accuracy. With that in mind and given that the full range of possibilities and conditions under which the information may be applied simply cannot be anticipated, YOU ARE CAUTIONED to make your own determinations as to the veracity and the suitability of the information to the particular circumstances that apply, or may apply, to you from time to time. Consistent with that approach it is recommended that where you have a particular purpose which would necessitate a reliance on information of the nature herein you obtain your own independent expert advice particularly structured to the relevant purpose. If this material is printed, circulated, distributed or copied in any manner, it is not to be modified without prior written permission, and further, it is to include the wording of the above disclaimer. End of MSDS (C) Copyright ACOHS Pty Ltd Copyright in the source code of the HTML, PDF, XML, XFO and any other electronic files rendered by an Infosafe system for Infosafe MSDS displayed is the intellectual property of Acohs Pty Ltd. Copyright in the layout, presentation and appearance of each Infosafe MSDS displayed is the intellectual property of Acohs Pty Ltd. The compilation of MSDS's displayed is the intellectual property of Acohs Pty Ltd. Copying of any MSDS displayed is permitted for personal use only and otherwise is not permitted. In particular the MSDS's displayed cannot be copied for the purpose of sale or licence or for inclusion as part of a collection of MSDS without the express written consent of Acohs Pty Ltd. file:///c /Documents%20and%20Settings/greg/Desktop/infosafe-import/msdsview.asp_763.html (10 of 11) [13/12/2011 2:50:15 AM]

11 Print Date: 11/12/2011 BS: file:///c /Documents%20and%20Settings/greg/Desktop/infosafe-import/msdsview.asp_763.html (11 of 11) [13/12/2011 2:50:15 AM]