3M Mini D Ribbon (MDR) Connectors.050 Boardmount Through-Hole Right Angle Receptacle - Shielded 102 Series

Transcription

1 M Mini D Ribbon (MDR) Connectors.050 Boardmount Through-Hole Right Angle Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Surface mount compatible PCT insulator material Ground lock PCB retention Interface latch design for connection stability MDR digital LCD interface as a 20 or 26 contact connector Contacts: 14, 20, 26, 6, 40, 50 and 68 See Regulatory Information Appendix (RIA) for chemical compliance information. Date Modified: November 15, 2007 TS-0621-C Sheet 1 of Physical Insulation Material: Glass Reinforced Polyester (PCT) Flammability: UL 94V-0 Color: See ordering information Contact Material: Copper Alloy Plating Underplating: See ordering information Wiping Area: See ordering information Solder Tail Plating: Gold Flash over Nickel (RIA E1 & C1 apply) Shroud and Latch Hook Material: Steel Plating: Nickel Ground Lock Material: Copper Alloy Plating: Tin in combination with gold flash plated tail Marking: M Logo and Part Number Electrical Current Rating: Insulation Resistance: Withstanding Voltage: 1 A > Ω at 500 V DC 500 V RMS for 1 Minute Environmental Temperature Rating: -55 C to +105 C Process Rating: 260 C (profile per J-STD-020C) UL File No.: E68080 Interconnect Solutions For technical, sales or ordering information call

2 M Mini D Ribbon (MDR) Connectors.050 Boardmount Through-Hole Right Angle Receptacle - Shielded 102 Series Contact Dimensions Quantity A B C D E [ 7.62 ] 0.9 [ 2.6 ] 1.16 [ 29.5 ] 0.50 [ 12.6 ] 0.77 [ 19.5 ] [ 11.4 ] 1.08 [ 27.5 ] 1.1 [.4 ] 0.65 [ 16.4 ] 0.92 [ 2.4 ] [ ] 1.2 [ 1. ] 1.46 [ 7.2 ] 0.80 [ 20.2 ] 1.07 [ 27.2 ] [ ] 1.48 [ 7.6 ] 1.71 [ 4.5 ] 1.05 [ 26.6 ] 1.2 [.5 ] [ 24.1 ] 1.58 [ 40.2 ] 1.81 [ 46.1 ] 1.15 [ 29.1 ] 1.42 [ 6.1 ] [ 0.48 ] 1.8 [ 46.5 ] 2.06 [ 52.4 ] 1.40 [ 5.5 ] 1.67 [ 42.4 ] [ ] 2.28 [ 57.9 ] 2.51 [ 6.8 ] 1.85 [ 46.9 ] 2.12 [ 5.8 ] Inch [mm] Tolerance Unless Noted inch ±.1 ±.01 ±.005 [ ] Dim ensions for Reference Only C B A Position Position 2 Position.0157 Sq [0.99] X.075 [1.90].45 [11.4] 0 [4.8].21 [5.] D E.05 [1.].28 [7.2] Position 2 (2X) Threaded Hole for Panel Mounting (See Note in Ordering Information) Position Position.25 [6.].7 [9.4].01 [0.] Last Position.050 Typ [1.27] [2.].11 [2.8] Ground Lock (2X) Ordering Information Connector Material: Blank = Beige D = Black (20 pos. only) Contact Quantity: X102XX-55XPX Wiping area plating: L = 8 µ [ 0.2 µm ] Min. Gold over 50 µ [ 1.27 µm ] Min. Ni. C = 0 µ [ 0.76 µm ] Min. Gold over 100 µ [ 2.54 µm ] Min. Ni. Panelmount thread size: G = M2.5 (14, 20, 26, 6, 40 position) H = #4-40 (20, 6, 50 & 68 position) Note: Must order M panelmount screws: M 44-8 for M2.5, M for #4-40. TS-0621-C Sheet 2 of Interconnect Solutions For technical, sales or ordering information call

3 M Mini D Ribbon (MDR) Connectors.050 Boardmount Through-Hole Right Angle Receptacle - Shielded 102 Series Contact Quantity A Dimensions B C [7.62].91 [2.64].78 [19.9] [11.4] [27.45].94 [2.8] [15.24] 1.21 [1.26] 1.09 [27.6] [21.59] [7.61] 1. [.9] [24.1] [40.15] 1.44 [6.5] [0.48] 1.81 [46.50] 1.69 [42.8] [41.91] [57.9] 2.1 [54.2] Inch [mm] Tolerance Unless Noted Inch ±.1 ±.01 ±.005 [ ] Dimensions for Reference Only Recommended Board Layout For 20, 6, 40, & 68 Positions Ø.028 ±.004 [0.71] (Viewed from Connector Side) B ±.004 Position Position 2 (See Note)* 2X Ø.110 ±.004 [2.80] [4.1] A.050 Typ [1.27] 2X.20 [5.0] [4.0] X.075 [1.91] Max 2X Last Position 0 Position Edge of PC Board For 14, 26, & 50 Positions Position Position 2 Ø.028 ±.004 [0.71] (See Note)* 2X Ø.110 ±.004 [2.80] [4.1] B ±.004 A.050 Typ [1.27].2X 20 [5.0] [4.0] X.075 [1.91] Max Last Position 0 Position Edge of PC Board *Note: Plated-through mounting holes for.062 [1.57] PC board thickness R.060 [ 1.5 ] C ± ±.004 [8.10] B ±.004 Recommended Panel Cut-Out Note: Panel thickness.079 [2.00] Max. TS-0621-C Sheet of Interconnect Solutions For technical, sales or ordering information call

4 Regulatory Information Appendix M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as This product is RoHS Compliant 2005/95/EC. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. Appendix E: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by M in writing, this information represents M s best knowledge and belief based upon information provided by third party suppliers to M. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as This product contains decabde in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/717/EC. RIA-2217B-c

5 Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. CHINA Appendix C1: China RoHS Electronic Industry Standard of the People s Republic of China, SJ/T , Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T , means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by M in writing, this information Appendix C2: China RoHS Electronic Industry Standard of the People s Republic of China, SJ/T , Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T , means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by M in writing, this information The numerical reference in the symbol above should not be construed as a representation regarding the product s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with M s Regulatory Information Appendix, then M s entire liability and Buyer s exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217B-c

6 Appendix C: China RoHS Electronic Industry Standard of the People s Republic of China, SJ/T , Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T , means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by M in writing, this information The numerical reference in the symbol above should not be construed as a representation regarding the product s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with M s Regulatory Information Appendix, then M s entire liability and Buyer s exclusive remedy will be in accordance with the product Warranty stated below. Important Notice All statements, technical information, and recommendations related to M s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in M s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at M s option, to replace or repair the M product or refund the purchase price of the M product. Except where prohibited by law, M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this M product, regardless of the legal theory asserted. M Electronics Interconnect Products 6801 River Place Blvd. Austin, TX U.S.A Please recycle. Printed in USA. M All rights reserved. RIA-2217B-c