NINGBO ZHONGJIANG HIGH-STRENGTH BOLTS ZHONGJIANG HIGH STRENGTH BOITS. HIGH QUALITY FASTENER MANUFACTURER

ASTM, SAE AND ISO GRADE MARKINGS AND MECHANICAL PROPERTIES FOR STEEL FASTENERS

ASTM, SAE AND ISO GRADE MARKINGS AND MECHANICAL PROPERTIES FOR STEEL FASTENERS Nominal Mechanical Properties Identification Grade Specification Fastener Description Material Size Range (in.) Proof Load

Thinking big. Acting bold.

Thinking big. Acting bold. About us Established in 1990, Sanghvi Forging is among the country s fastest growing forging players. Our products Tool Steel Forged Flanges Heavy Forgings Machined Forgings

PRO-CIMA Piping Products

PRO-CIMA Piping Products Brand Mark : PHP (PRO-CIMA High Quality Products) August, 2014 UNICIMA Corporation Tokyo, Japan Japan UNICIMA Corporation presents the reliable high quality new brand PRO-CIMA

CONTOUR BODIED FLANGE BRANCH FITTINGS Incorporating the design and manufacture of specialised piping products

BURTON DELINGPOLE FLANGES AND FITTINGS CONTOUR BODIED FLANGE BRANCH FITTINGS Incorporating the design and manufacture of specialised piping products Contoured Bodied Flange Branch Fittings Buttweld Branch

Kapil Enterprises. Made in India. Kapil Enterprises

Kapil Enterprises Made in India Kapil Enterprises 330, EHTP, HSIDC kundli industrial area District Sonepat 131 028 Haryana State, India Email: sales@bigboltnut.com Telephones + 91 ( 130 ) 211 9061 Cell

Materials Carbon Steel and Malleable Iron are used in the manufacture of concrete inserts. Stainless Steel and other materials are available.

Concrete inserts offered in this section are designed to provide a pre-set support point in concrete ceilings, walls, and floors. A range of inserts with varying design loads are available. Materials Carbon

CT-Bolt Combination Rock Bolt

CT-Bolt Combination Rock Bolt 2 Contents Introduction... 3 Fields of Application... 4 Main Advantages... 4 System Description... 4 System Components... 5 Specifications... 5 Installation Procedure... 6

Valves. DIN Standard JINAN MEIDE CASTING CO., LTD.

Valves DIN Standard More than 50 years of Foundry Experience DIN Valves 01 Company Profile Jinan Meide Casting Co. Ltd. was established in 1962. In the past decades, Jinan Meide has seized each opportunity

TERRATORQUE HELICAL ANCHORS AND HELICAL PILING PRODUCT CATALOG

INTRODUCTION TERRATORQUE HELICAL ANCHORS AND HELICAL PILING PRODUCT CATALOG TerraTorque offers quality helical anchors and helical piling to the construction industry. Our products are available in solid

Jiangyin Donghao Stainless Steel Pipe Co., Ltd

Jiangyin Donghao Stainless Steel Pipe Co., Ltd March 12 th, 2018 Edition ISO 9001-2008, PED97/23/EC and ASME Boiler and Pressure Vessel Code Certificate certified. Built in 2005, Cover area over 30,000

ONE-STOP SHOP FOR AEROSPACE MATERIALS

ONE-STOP SHOP FOR AEROSPACE MATERIALS Scope Metals Group is a leading distributor and supplier of finished and semi-finished metals products and engineered plastics products to industrial manufacturers.

DYWIDAG Cable Bolts for Mining

DYWIDAG Cable Bolts for Mining 2 Contents Introduction... 3 Fields of Application... 4 Main Advantages... 4 System Description... 4 System Components... 5 Specifications... 5 Installation Procedure...

Metal Seated Ball Valves

VALVES AND PIPELINE SUPPLIES Metal Seated Ball Valves FAST TRACK SUPPLY CLASS V & VI SHUT OFF The production of a zero maintenance, high performance metal seated valve has been the goal of many engineers.

MANUFACTURER, IMPORTER AND DISTRIBUTOR FASTENERS, COMPONENTS AND SEALING DEVICES

MANUFACTURER, IMPORTER AND DISTRIBUTOR FASTENERS, COMPONENTS AND SEALING DEVICES Competitive Advantage Product Overview Manufacturing and Services People Diversity People. Leadership. Service. Westermann

Concrete Inserts. B Adjustable Metal Deck Ceiling Bolt

B3019 - Adjustable Metal Deck Ceiling Bolt Size Range: 3 /8"-16 thru 3 /4"-10 rod Function: For use in metal deck formed concrete to attach hanger rods. Allows for pre-positioning of hanger rods in poured

0500/12.02 SEAL LOCK. Sealing nuts with reduced installation effort and prevention against loss

0500/12.02 SEAL LOCK Sealing nuts with reduced installation effort and prevention against loss The reliable solution for sealing bolt-nut joints Screwed connections remain in very common use. In many cases,

SECTION HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS

SECTION 26 05 29 HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall provide all labor, materials, equipment, and incidentals as shown, specified, and

1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases.

SECTION 260529 - HANGERS AND SUPPORTS PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases. 1.2

Page 9 of European Technical Approval ETA-10/0280 Marking: Marking: Identifying Identifying mark: mark: Anchor Anchor identity: identity: Category Category: : S KA H (stainless steel) K (hot dip galvanized)

Introduce ESteel Corporation.

Introduce ESteel Corporation. We, ESteel Corporation. were established in 2001 and a privately manufacturer and exporter & importer. ESteel is one of the leading companies in Korea dealing with all kinds

Corrosion Resistant Bolting for Use in the Petroleum and Natural Gas Industries

Corrosion Resistant Bolting for Use in the Petroleum and Natural Gas Industries API SPECIFICATION 20F FIRST EDITION, XXX 201X 1 1. Scope 1.1 Purpose This API specification specifies requirements for the

Established DOC. NO : SSI / PROFILE Rev-03

Established 2002 www.sandskuwait.com C O M P A N Y P R O F I L E DOC. NO : SSI / PROFILE-001 - Rev-03 2 S & S International Company W.L.L. was Incorporated in 2009 with the primary objective of becoming

Industeel. Clad plates

Industeel Clad plates Our Business Industeel Leading special steels producer Industeel is a subsidiary of ArcelorMittal producing special steel hot rolled plates, forged blocks, ingots and formed pieces

Micro Motion Compact Density Meters (CDM)

Measuring Instruments Directive (MID) Applications Supplement MMI-20029195, Rev AA April 2015 Micro Motion Compact Density Meters (CDM) Measuring Instruments Directive (MID) Applications Supplement Safety

ASTM, SAE AND ISO BOLTING MATERIAL

, SAE AND ISO BOLTING MATERIAL Grade Yield SAE J429Grade 1 A307Grades A&B SAE J429Grade 2 Low or Low Carbon Low or 33,000 4 3/4 Over 3/4 to 55,000 33,000 57,000 36,000 60,000 60,000 SAE J429Grade 4 Carbon

committed to quality, cost & delivery

committed to quality, cost & delivery PT. CILEGON FABRICATORS PT. CILEGON FABRICATORS Jl. Raya Bojonegara - Salira, Argawana Pulo Ampel, Serang - Banten 42454 Indonesia www.cilegonfab.co.id BOILER PRESSURE

Section 906. STRUCTURAL STEEL

906.01 Section 906. STRUCTURAL STEEL 906.01. General Requirements. Finished rolled shapes must be free from imperfections that affect strength and durability in accordance with ASTM A 6. Rolled shapes

Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties

Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties Stainless steel describes a family of steels highly resistant to tarnishing and rusting that contain at least two

Comparison of BS and BS EN for steel materials

Comparison of BS and BS EN for steel materials Appendix This table only highlights the comparison of BS and BS EN on steel materials, which are relevant to plan approval. Title of BS BS BS EN Title of

1. Base plates, setting plates and anchor rods for columns. 8. Lintels if connected to structural steel columns.

PAGE 051200-1 SECTION 051200 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification sections,

ITEM 686 TRAFFIC SIGNAL POLE ASSEMBLIES (STEEL)

ITEM 686 TRAFFIC SIGNAL POLE ASSEMBLIES (STEEL) 686.1. Description. This Item shall govern for designing, fabricating, furnishing and erecting steel traffic signal pole assemblies of the various types

SECTION METAL STAIRS

Tender SECTION 05510 METAL STAIRS PART 1 GENERAL 1.01 SECTION INCLUDES A. This section includes internal and external shop fabricated pre assembled steel stairs with integral handrails and ballustrades

Light Bases & Light Fixtures

Light Bases & Light Fixtures Keeping Them Together Clamping Force/Preload Force Torque Bolt Specifications Corrosion Galling 18-8 Disadvantages EB-83 bolts 2 Clamping Force = Preload Force 3 Fastener acts

ENGINEERED SOLUTIONS.

ENGINEERED SOLUTIONS www.handytube.com History of HandyTube 1867 Handy & Harman founded as a precious metals company 1892 Handy & Harman sets domestic traded silver price 1905 Started diversifying metals

committed to quality, cost & delivery

committed to quality, cost & delivery Jl. Raya Bojonegara - Salira, Argawana Pulo Ampel, Serang - Banten 42454 Indonesia homepage http//www.cilegonfab.co.id mail ptcf@cilegonfab.co.id BOILER PRESSURE PART,

Introduction Introduction

Introduction Maritime International is a leading manufacturer of marine bollards and cleats worldwide. Our range of bollards and cleats is unsurpassed by any other manufacturer or supplier. Maritime can

Cryogenic Metal Seated Butterfly Valves

Cryogenic Metal Seated Butterfly Valves The Key to Cryogenic Valve Solutions VELAN S.A.S VELAN Inc Group VELAN inc is one of the world's leading independent manufacturer of steel gate, globe, check, butterfly

Fig Beam Clamp Retaining Strap (B-Line B3367)

Fig. 69 - Beam Clamp Retaining Strap (B-Line B3367) Size Range: 3 /8"-16 thru 3 /4"-10 rod 4 (101.6mm) thru 16 (406.4mm) lengths Note: longer lengths are available consult factory Material: Pre-Galvanized

BEARING METAL STUD FRAMING

L-1 Section 05410 Long Form Specification LOAD BEARING METAL STUD FRAMING This section includes axially loaded steel studs, with unique slotted top channels, usually of 0.91, 1.2 and 1.5 mm (16, 18, or

Preassembled steel stairs with concrete-filled treads.

SECTION 055113 - PART 1 - GENERAL 1 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this

DAHE STEEL STRUCTURE CO.,LTD.

DAHE ENTERPRISES LIMITED DAHE STEEL STRUCTURE CO.,LTD. FOREWORD FOREWORD Dahe Enterprises Ltd registers in Hong Kong. She owns two sole-investment companies Dahe Steel Structure (HK) Co., Ltd & Nanhai

Specialist in forgings and machining

Specialist in forgings and machining MAINTENANCE AND PROCESS INDUSTRY MECHANICAL ENGINEERING EXTRACTIVE INDUSTRY AND REFINERIES OFFSHORE AND MARITIME Memar Strength, quality and reliability Maintenance

EUROPEAN TECHNICAL ASSESSMENT ETA-17/0336

EUROPEAN TECHNICAL ASSESSMENT ETA-17/0336 HILTI ANCHOR CHANNELS & BOLTS A systematic approach to innovative anchoring Hilti now offers a vast range of Anchor Channels for a variety of applications to the

SECTION LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM

Page 1 of 6 SECTION 08 32 20 LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS SLIDING DOORS. SECTION INCLUDES OVERHEAD SLIDING TUBE ASSEMBLY, MOUNTING

SECTION 716 SIGN MATERIALS SCOPE

716 716.01.01 MATERIALS COVERED SECTION 716 SIGN MATERIALS SCOPE A. This specification covers the kind and quality of materials used in the construction and fabrication of traffic control devices used

Division MEDICAL EQUIPMENT SUPPORT SYSTEMS PART 1 GENERAL

Division 11-7010 MEDICAL EQUIPMENT SUPPORT SYSTEMS PART 1 GENERAL 1.1 SUMMARY A. Contractor shall provide medical equipment support systems as indicated on the drawings. Support systems shall be as required

NON-CLEANING AND OPTIMIZED FOR CORROSIVE ENVIRONMENTS. Hilti HIT-Z-F and HIT-HY 200 ultimate performance chemical anchor system

NON-CLEANING AND OPTIMIZED FOR CORROSIVE ENVIRONMENTS Hilti HIT-Z-F and HIT-HY 200 ultimate performance chemical anchor system ULTIMATE PERFORMANCE THAT LASTS Hilti HIT-Z-F corrosion-resistant anchor rod

Forged Eye Bolts. Working Load Limit (lbs.)* Weight Per 100 (lbs.)

Forged Eye Bolts G-291 Para Español: www.thecrosbygroup.com SEE APPLICATION AND WARNING INFORMATION On Page 180-181 Forged Steel - Quenched and Tempered. Fatigue rated at 1-1/2 times the Load at 20,000

ABOUT US OUR EXPERTISE

ABOUT US Snam Alloys Pvt Ltd., is one of the fastest growing and largest producer of Value Added Ferro Alloys in the world. With 25 years national and international presence in over 40 countries and 6

SECTION VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS

PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply to this Section. 1.2 SUMMARY A. This Section includes the

Multi-Institutional Academic Health Science & Research Center Evansville, IN

SECTION 05 5000 - METAL FABRICATIONS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

City of Winnipeg BASES, HANGERS AND SUPPORTS Section NEWPCC - Pump Well Isolation Page 1 of 6 Tender No June 2003

NEWPCC - Pump Well Isolation Page 1 of 6 PART 1 General 1.1 RELATED SECTIONS.1 Section 01001 General Requirements..2 Section 03300 - Cast-in-Place Concrete..3 Section 05121 - Structural Steel for Buildings..4

NORTHWESTERN UNIVERSITY PROJECT NAME JOB #

SECTION 26 0529 - HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and

FREYSSIBAR. The prestressing bar for civil works C III 3

FREYSSIBAR The prestressing bar for civil works D e s i g n, B u i l d, M a i n t a i n C III 3 FREYSSIBAR Prestressing system Developed by Freyssinet, worldwide leader in prestressing activities, the

LANE ENTERPRISES, INC. STANDARDS & SPECIFICATIONS

LANE ENTERPRISES, INC. STANDARDS & SPECIFICATIONS The following pages are an index of standards and specifications associated with Lane products. For quick reference purposes, Lane products are shown below

Taesung Industrial COMPANY PROFILE HISTORY PROCESS PRODUCT LIST EQUIPMENT MEASURING MACHINE MAIN CUSTOMER CATALOG QUALITY ASSURANCE

Taesung Industrial LIST TAESUNG INDUSTRIAL SYSTEMS CO., LTD. http://taisung.koreasme.com COMPANY PROFILE HISTORY PROCESS PRODUCT LIST EQUIPMENT MEASURING MACHINE MAIN CUSTOMER CATALOG QUALITY ASSURANCE

E-Z-Ground Grounding Systems. Ground Wire Size. Water Pipe Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB

Waterpipe Ground Clamps Cat. No. Ground Wire Size Water Pipe Size 2-TB 1/2 in., 3/4 in., 1 or rebar 4-10 3-TB 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, 4 2-1/2 in., 3 in. or 3-1/2 in. #2 WG 5-TB 4 in., 4-1/2

PHOENIX TUBES & FITTINGS. Corrosion resistant. Exotic materials. International Quality. Effecient supply chain management. Fast track delivery

Effecient supply chain management Corrosion resistant International Quality Exotic materials Fast track delivery AN ISO 9001:2008 CO. Company Profile In the lifeline of industries, our fittings make sure

Robert Davis Hickman, Williams & Company. Steel Founders Society of America March 23, 2011

Robert Davis Hickman, Williams & Company Steel Founders Society of America March 23, 2011 Three area s of interest World Production of Ferroalloys High Carbon Ferro Chromium Ferro Molybdenum Globally,

Technology Linear friction welding

Technology Linear friction welding EN A strong partner Linear friction welding is a new process and is a derivative of our rotary technology where we are one of the world s leading suppliers with more

SECTION ORNAMENTAL ALUMINUM FENCING

SECTION 032300 ORNAMENTAL ALUMINUM FENCING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

DONGWOO E&C Tube & Pipe Division

Tube & Pipe Division we are ready to be a new global market leader. Cu-Ni / Brass / Al-Brass / Copper Head Office : #284-17 Jinjang-dong, Buk-gu, Ulsan, Korea (683-350) TEL : +82-52-288-1862 FAX : +82-52-288-1863

KAEFER International Technical Trainee Programmes

KAEFER International Technical Trainee Programmes About KAEFER The KAEFER Group is currently the world s largest independent supplier of systems in the field of thermal insulation, as well as noise and

Corrosion Resistant Bolting for Use in the Petroleum and Natural Gas Industries

Corrosion Resistant Bolting for Use in the Petroleum and Natural Gas Industries API SPECIFICATION 20F SECOND EDITION, XXXXX 201X API MONOGRAM PROGRAM EFFECTIVE DATE: XXXXXXXXXX XX, 201X Corrosion Resistant

The Leader in Oilfield Coating Technology ISO 9001:2008.

The Leader in Oilfield Coating Technology ISO 9001:2008 www.ssplating.com Who We Are S&S Plating/Coating Dynamics is the leading provider of electro plated coatings to the oilfield, power generation and

South African nuclear industry overview Van Zyl de Villiers R&D Division Necsa

South African nuclear industry overview Van Zyl de Villiers R&D Division Necsa ASME Nuclear Codes and Standards Workshop 7 October 2008 Contents South African energy challenges South African Nuclear Energy

COMPANY SHORT PRESENTATION

Single source supplier of complete piping packages ICARUS SA is a leading single source supplier of complete piping packages and manufacturer of specialty valves, compact flanges acc Norsok L-005 and tailor

1.2 ACTION AND INFORMATIONAL SUBMITTALS.1 Provide submittals in accordance with Section Submittal Procedures.

BID OPPORTUNITY NO. 253-2011 PAGE 1 OF 7 PART 1 GENERAL 1.1 REFERENCES.1 American Society of Mechanical Engineers (ASME).1 ASME B31.1, Power Piping, B31.3 Process Piping, B31.9 Building Services Piping..2

COPPER PRODUCTS. 145 COPPER PRODUCTS Half Hard Tellurium Rounds

COPPER PRODUCTS 110 COPPER PRODUCTS Rounds... 12-2 Squares... 12-2 Flats - Square Edge...12-3 thru12-4 Flats - Full Round Edge (FRE)... 12-5 Cold Rolled Sheet... 12-6 110 Quarter Hard Copper Sheet... 12-6

2014 Company Profile R.L.Hill Engineering

2014 Company Profile R.L.Hill Engineering Your one stop shop for... PTA welded products High Temperature Fasteners Steam valve spares General Machining Turning, Milling & drilling Fabrication Sheet metal

SPECIFICATIONS - DETAILED PROVISIONS Section Stainless Steel Sluice Gates C O N T E N T S

SPECIFICATIONS - DETAILED PROVISIONS Section 11294 - Stainless Steel Sluice Gates C O N T E N T S PART 1 - GENERAL... 1 1.01 SUMMARY... 1 1.02 REFERENCES... 1 1.03 DEFINITIONS... 1 1.04 DESIGN REQUIREMENTS...

Specifications for FL-100 Soffit Panel

Union Corrugating Company Specifications for FL-100 Soffit Panel SECTION 07410 METAL SOFFIT PANELS PART 1 GENERAL 1.1 DESCRIPTON A. Section Includes: 1. Preformed metal soffit panel system 2. Associated

Partner to the oil, gas and chemicals industry joined together in competence! 0985/14.02

Partner to the oil, gas and chemicals industry joined together in competence! 0985/14.02 Böllhoff: Your expert for fasteners Our core business is to cater for the wishes of our customers and help them

SECTION METAL FLOOR PLATE STAIRS

SECTION 05513 - METAL FLOOR PLATE STAIRS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

Our philosophy at your service

CPC Inox is a leader in stainless steel since 1976 Our philosophy at your service Three production sites in Italy, sales branches in France (CPC Inox France) and Germany (CPC Inox Deutschland): CPC Inox

Specifiers: Click on the icon in the WORD toolbar to reveal detailed instructions

Specifiers: Click on the icon in the WORD toolbar to reveal detailed instructions (Specifier Note: The purpose of this guide specification is to assist the specifier in correctly specifying perforated

SECTION BLAST RESISTANT WINDOWS

SECTION 08 56 53 BLAST RESISTANT WINDOWS SPEC WRITER NOTE: 1. Delete text between // // not applicable to project. Edit remaining text to suit project. 2. See VA Physical Security Design Manual for security

Daytona Beach Pier Building Renovation Jun 2010

SECTION 15060 - HANGERS AND SUPPORTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

MASTERSPEC - SHORT FORM. B. See Division 5 Section "Metal Stairs" for steel tube railings associated with metal stairs.

SECTION 05721 - ORNAMENTAL RAILINGS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Glass supported railings. B. See Division 5 Section "Metal Stairs" for steel tube railings associated

Notes Changed note Date. 1 (A) Changed template 09 / 07 / 2008

Revisions Notes Changed note Date 1 (A) Changed template 09 / 07 / 2008 2 Changed template. Clause 12.5.4.1 hot-rolled steel added. Clause 12.5.4.2, 12.5.2.4, 12.5.3.4, 12.5.4.4, 12.5.5.4, 12.5.6.4, 12.5.7.4

WELCOME TO TRUS GLOBAL CO.,LTD TOTAL SOURCING SOLUTION COMPANY

WELCOME TO GLOBAL CO.,LTD TOTAL SOURCING SOLUTION COMPANY 1. Index 1. Index 2. Introduction 3. Pipe Supply 4. Fitting Supply 5. Flange Supply 6. Hammer Wing Union Supply 7. Bolt / Nut Supply 8. Gasket

FUKUI AT A GLANCE. Ver. ENPD001 FUKUI SAFETY VALVE

FUKUI AT A GLANCE Ver. ENPD001 FUKUI SAFETY VALVE Main Markets Marine Market LNG Carrier LPG Carrier FPSO FLNG Demand for Natural gas is growing as clean energy. Our products boast 95% share in LNG carrier

R. KIND GmbH Nochener Str Gummersbach / Germany Fon +49 (0) Fax +49 (0) THINKING STEEL.

R. KIND GmbH Nochener Str. 1-3 51647 Gummersbach / Germany Fon +49 (0) 2261 6033 3 Fax +49 (0) 2261 21 75 0 www.r-kind.de THINKING STEEL. Our challenge: to go beyond the limits of conventional forgings.

SECTION ALUMINUM STORM WINDOWS

PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 08 51 69.11 ALUMINUM STORM WINDOWS SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. 2. Also delete any other item or paragraph not applicable

Windows & Deal Trays Maximum security for high-threat locations

Windows & Deal Trays Maximum security for high-threat locations Ross high security aluminum and steel windows and deal trays are certified to withstand 5 or 15 minutes of simulated mob attack and rifle-level

6.1 General. This chapter shall provide requirements for correct use of sprinkler system components and hardware.

NFPA 13-Proposed 2013 Edition Standard for the Installation of Sprinkler Systems TIA Log No.: 1054 Reference: Chapter 6 Comment Closing Date: June 1, 2012 Submitter: Bob Caputo, Fire & Life Safety America

Engineered Parts Your Design Our Competence

Engineered Parts Your Design Our Competence Engineered Parts by Bossard Your Design Our Competence Competent Partner Proven Quality Highest Supply Reliability Optimum Price-Performance-Ratio Competent

Copper alloys and steel components. for Oil & Gas Industry

Copper alloys and steel components for Oil & Gas Industry Lebronze alloys has been supplying copper alloys semi-finished and finished products for seawater corrosion resistance for more than 50 years.

Section # 2. Assembly Fasteners. ICCA Assembly Fasteners - Section # 2 #

ICCA Assembly Fasteners - Section # 2 Section # 2 Assembly Fasteners There were many suppliers of assembly fasteners to Chrysler through the years. In general there were specific fastener manufacturers

1470 Dale Court Austell, GA Phone: Fax:

1470 Dale Court Austell, GA 30168 Phone: 404-351-2202 Fax: 404-351-2203 LC METALS, INC. PRODUCT INDEX Page # STUD GUARDS...3 FHA STRAPS...3 BOCA PLATES (Nail Plates)...4 PLUMBERS TAPE (Banding Iron)...4

Unit 4. The secondary sector 1. The secondary sector - Industry is the activity that transforms raw materials into manufactured products.

Unit 4. The secondary sector 1. The secondary sector - Industry is the activity that transforms raw materials into manufactured products. Industry requires raw materials, energy sources (provide the force)

Fig. 1 - Standard Clevis Hanger

Revision 10/24/2007 Fig. 1 - Standard Clevis Hanger Component of State of California OSHPD Approved Seismic Restraints System Size Range Size 1/2" thru 36" pipe. Function Recommended for the suspension

Lifting Sockets. Flat Lifting Sockets

Lifting sockets are widely used in the application of precast concrete construction, such as lifting beams, wall and floor slabs etc.. A reinforcement bar is to be inserted through the cross hole to transfer

Rosemount 9901 Chambers for Process Level Instrumentation

Reference Manual Rosemount 9901 Chambers for Process Level Instrumentation Reference Manual Safety instructions These safety instructions are to be read and used in conjunction with the manual of the

SECTION VIBRATION CONTROLS FOR HVAC PIPING AND EQUIPMENT

SECTION 230548 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Elastomeric Isolation pads. 2. Elastomeric Isolation mounts. 3. [Freestanding] [Restrained] [Freestanding and restrained]

Union County Vocational - Technical Schools Scotch Plains, New Jersey

SECTION 055113 - METAL PAN STAIRS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

CONSTRUCTION SPECIFICATION FOR FOOTINGS AND PADS FOR ELECTRICAL EQUIPMENT

ONTARIO PROVINCIAL STANDARD SPECIFICATION OPSS.MUNI 616 APRIL 2018 CONSTRUCTION SPECIFICATION FOR FOOTINGS AND PADS FOR ELECTRICAL EQUIPMENT TABLE OF CONTENTS 616.01 SCOPE 616.02 REFERENCES 616.03 DEFINITIONS

D D TYPE A1, A2 & B MICHIGAN DEPARTMENT OF TRANSPORTATION 5-40 CONNECTION. L4" x 4" x 3/8" Brace. C8 x 4.25 Strut. WT9 x 17.5.

Sign length minus Adjust to avoid interference with sign legend A Deck fascia A 6" Equal Equal 6" Sign length (L) varies 6 to 12 PLAN 0 CONNECTION (DECK FASCIA) Angle connection assembly F Face of concrete

Ugitech Stainless steel solutions for the oil and gas industry

Ugitech Stainless steel solutions for the oil and gas industry 02 Stainless steel solutions for the oil and gas industry Ugitech and the Oil and Gas industry The world s conventional oil reserves are seriously

Agustín Leal de Lama The road to Life

Agustín Leal de Lama The road to Life Company profile 10 // ACCIONA Sustainability Report 2012 COMPANY PROFILE Company profile Sustainability creates value ACCIONA is one of the leading Spanish companies