FCA PF Pressure Sensitive Adhesive Cellular and Fibrous Materials Automotive Spec Testing

Transcription

1 3 FCA PF-10770: Pressure Sensitive Cellular and Fibrous Materials FCA PF Pressure Sensitive Cellular and Fibrous Materials Technical Bulletin August, M tested the following adhesive tapes to the Automotive OEM Spec: FCA PF Pressure Sensitive Cellular and Fibrous Materials. The results of the testing are provided in the following information. s not listed on this d ocument have not been tested to this spec. 3M Reinforced Transfer Tape L1+RT (3.2 mil) 3M Double Coated PolyEster Tape L1+DCP (3.5 mil) 3M Double Coated PolyEster Tape L2+DCP (4.8 mil) 3M Transfer Tape L2+T5 (5.0 mil) 3M Transfer Tape L3+T5 (5.0 mil) Test 180 Peel Adhesion on 300mm / 12 inch per min Test Condition / Environment Table 2 Initial, 2 hour Room Temp Table 2 Aging, C / 175 F Table 2 Aging, 8 93 C / 200 F Table 2 Water Immersion for 24 Room Temp Table 2 Environmental Cycle (5 cycles) C / 175 F C / -20 F Fl exi bl e Compos i tes (Table 2) = when o ne or more of the s ubs tra tes i s fl exi ble; thi n bond a dhes i ves a re pri ma ri l y us ed for fl exi bl e bonds.

2 FCA PF-10770: Pressure Sensitive Cellular and Fibrous Materials PU Ester PU Ether XLPE Foam EPDM Foam Nitrile Foam Neoprene Foam EPDM Rubber Neoprene Rubber Santoprene Rubber Butyl Rubber L1 + RT L1 + DCP L2 + DCP L2 + T5 L3 + T5 2 Room Temp P P P P N/A N/A N/A N/A N/A N/A N/A Heat Age P P P P N/A N/A N/A N/A N/A N/A N/A Heat P P P P N/A N/A N/A N/A N/A N/A N/A Immersion P P P P N/A N/A N/A N/A N/A N/A N/A Cycle P P P P N/A N/A N/A N/A N/A N/A N/A 2 Room Temp P P P P N/A N/A N/A N/A N/A N/A N/A Heat Age P P P P N/A N/A N/A N/A N/A N/A N/A Heat P P P P N/A N/A N/A N/A N/A N/A N/A Immersion P P P P N/A N/A N/A N/A N/A N/A N/A Cycle P P P P N/A N/A N/A N/A N/A N/A N/A 2 Room Temp P P P P P P P N/A N/A N/A N/A Heat Age P P P P P F P N/A N/A N/A N/A Heat P P P P P P P N/A N/A N/A N/A Immersion P P P P P P P N/A N/A N/A N/A Cycle P P P P P F P N/A N/A N/A N/A 2 Room Temp P P P P P P P N/A N/A N/A N/A Heat Aged P P P P P P P N/A N/A N/A N/A Heat P P P P P P P N/A N/A N/A N/A Immersion P P P P P P P N/A N/A N/A N/A Cycle P P P P P P P N/A N/A N/A N/A 2 Room Temp P P P P P P P P P P P Heat Aged P P P P P P P F P P F Heat P P P P P P P F P P F Immersion P P P P P P P F P P P Cycle P P P P P P P P P P P P = Pa s s, F = Fa i l, N/A = Not Tested

3 FCA PF-10770: Pressure Sensitive Cellular and Fibrous Materials L1 + RT L1+RT Substrate Substrate Table 2 2 Room Temp Observation Requirement 90 / 8.23 or Clean Peel Pa s s PU Ether Foam Clean Peel Pa s s Foam Tear Pa s s Clean Peel Pa s s L1+RT Substrate Substrate Table 2 2 Room Temp Observation Requirement 90 / 8.23 or Clean Peel Pa s s PU Ether Foam Clean Peel Pa s s Foam Tear Pa s s Clean Peel Pa s s L1+RT Substrate Substrate Table C / 200 F or Clean Peel Pa s s PU Ether Foam Clean Peel Pa s s XLPE Foam Foam Tear Pa s s Cohesive Pa s s L1+RT Table 2 Water Immersion for 24 Room Temp Substrate Substrate / or Cohesive Pa s s PU Ether Foam Clean Peel Pa s s Foam Tear Pa s s Cohesive Pa s s

4 FCA PF-10770: Pressure Sensitive Cellular and Fibrous Materials L1 + RT (Cont.) L1+RT Substrate Substrate Table 2 Environmental Cycle / or Clean Peel Pa s s PU Ether Foam Clean Peel Pa s s Foam Tear Pa s s Cohesive Pa s s L1 + DCP L1+DCP Substrate Substrate Table 2 2 Room Temp Observation Requirement 90 / 8.23 or Clean Peel Pa s s PU Ether Foam Clean Peel Pa s s Foam Tear Pa s s Clean Peel Pa s s L1+DCP Substrate Substrate Table C / 175 F / or Clean Peel Pa s s PU Ether Foam Clean Peel Pa s s Foam Tear Pa s s Clean Peel Pa s s L1+DCP Substrate Substrate Table C / 200 F / or Clean Peel Pa s s PU Ether Foam Clean Peel Pa s s Foam Tear Pa s s Clean Peel Pa s s

5 FCA PF-10770: Pressure Sensitive Cellular and Fibrous Materials L1 + DCP (Cont.) L1+DCP Table 2 Water Immersion for 24 Room Temp Substrate Substrate / or Clean Peel Pa s s PU Ether Foam Clean Peel Pa s s Foam Tear Pa s s Cohesive Pa s s L1+DCP Table 2 Environmental Cycle Substrate Substrate / or Clean Peel Pa s s PU Ether Foam Clean Peel Pa s s Foam Tear Pa s s Cohesive Pa s s L2 + DCP L2+DCP Table 2 2 Room Temp Observation Requirement 90 / 8.23 or Clean Peel Pa s s PU Ether Foam Foam Tear Pa s s XLPE Foam Foam Tear Pa s s Clean Peel Pa s s EPDM Foam Foam Tear Pa s s Nitrile Foam Clean Peel Pa s s Neoprene Foam Clean Peel Pa s s

6 FCA PF-10770: Pressure Sensitive Cellular and Fibrous Materials L2+ DCP (Cont.) L2+DCP Table C / 175 F / or Foam Tear Pa s s PU Ether Foam Clean Peel Pa s s XLPE Foam Foam Tear Pa s s Foam Tear Pa s s EPDM Foam Foam Tear Pa s s Nitrile Foam Clean Peel Fa i l Neoprene Foam Foam Tear Pa s s L2+DCP Table C / 200 F / or Clean Peel Pa s s PU Ether Foam Foam Tear Pa s s XLPE Foam Foam Tear Pa s s Foam Tear Pa s s EPDM Foam Foam Tear Pa s s Nitrile Foam Clean Peel Pa s s Neoprene Foam Cohesive Pa s s L2+DCP Table 2 Water Immersion for 24 Room Temp / or Clean Peel Pa s s PU Ether Foam Foam Tear Pa s s XLPE Foam Foam Tear Pa s s Foam Tear Pa s s EPDM Foam Foam Tear Pa s s Nitrile Foam Cohesive Pa s s Neoprene Foam Clean Peel Pa s s

7 FCA PF-10770: Pressure Sensitive Cellular and Fibrous Materials L2 + DCP (Cont.) L2+DCP Table 2 Environmental Cycle / or Clean Peel Pa s s PU Ether Foam Foam Tear Pa s s XLPE Foam Foam Tear Pa s s Foam Tear Pa s s EPDM Foam Foam Tear Pa s s Nitrile Foam Cohesive Fa i l Neoprene Foam Clean Peel Pa s s L2 + T5 L2+T5 Table 2 2 Room Temp Observation Requirement 90 / 8.23 or Foam Tear Pa s s PU Ether Foam Foam Tear Pa s s XLPE Foam Foam Tear Pa s s Clean Peel Pa s s EPDM Foam Foam Tear Pa s s Nitrile Foam Clean Peel Pa s s Neoprene Foam Clean Peel Pa s s L2+T5 Table C / 175 F / or Foam Tear Pa s s PU Ether Foam Foam Tear Pa s s XLPE Foam Foam Tear Pa s s Foam Tear Pa s s EPDM Foam Foam Tear Pa s s Nitrile Foam Foam Tear Pa s s Neoprene Foam Foam Tear Pa s s

8 FCA PF-10770: Pressure Sensitive Cellular and Fibrous Materials L2 + T5 (Cont.) L2+T5 Table C / 200 F / or Foam Tear Pa s s PU Ether Foam Foam Tear Pa s s XLPE Foam Foam Tear Pa s s Foam Tear Pa s s EPDM Foam Foam Tear Pa s s Nitrile Foam Clean Peel Pa s s Neoprene Foam Clean Peel Pa s s L2+T5 Table 2 Water Immersion for 24 Room Temp / or Foam Tear Pa s s PU Ether Foam Foam Tear Pa s s XLPE Foam Foam Tear Pa s s Clean Peel Pa s s EPDM Foam Foam Tear Pa s s Nitrile Foam Clean Peel Pa s s Neoprene Foam Foam Tear Pa s s L2+T5 Table 2 Environmental Cycle / or Foam Tear Pa s s PU Ether Foam Foam Tear Pa s s XLPE Foam Foam Tear Pa s s Foam Tear Pa s s EPDM Foam Foam Tear Pa s s Nitrile Foam Clean Peel Pa s s Neoprene Foam Cohesive Pa s s

9 FCA PF-10770: Pressure Sensitive Cellular and Fibrous Materials L3 + T5 L3+T5 Table 2 2 Room Temp / or Foam Tear Pa s s PU Ether Foam Foam Tear Pa s s XLPE Foam Foam Tear Pa s s Foam Tear Pa s s EPDM Foam Foam Tear Pa s s Nitrile Foam Cohesive Pa s s Neoprene Foam Foam Tear Pa s s EPDM Rubber Clean Peel Fa i l Neoprene Rubber Clean Peel Pa s s Sa ntoprene Clean Peel Pa s s Rubber Butyl Rubber Clean Peel Fa i l L3+T5 Table C / 175 F / or Foam Tear Pa s s PU Ether Foam Foam Tear Pa s s XLPE Foam Foam Tear Pa s s Foam Tear Pa s s EPDM Foam Foam Tear Pa s s Nitrile Foam Clean Peel Pa s s Neoprene Foam Foam Tear Pa s s EPDM Rubber Clean Peel Fa i l Neoprene Rubber Clean Peel Pa s s Sa ntoprene Rubber Clean Peel Pa s s Butyl Rubber Clean Peel Fa i l

10 FCA PF-10770: Pressure Sensitive Cellular and Fibrous Materials L3 + T5 (Cont.) L3+T5 Table C / 200 F Observation Requirement 90 / 8.23 or Foam Tear Pa s s PU Ether Foam Clean Peel Pa s s XLPE Foam Foam Tear Pa s s Clean Peel Pa s s EPDM Foam Foam Tear Pa s s Ni tri l efoam Clean Peel Pa s s Neoprene Foam Clean Peel Pa s s EPDM Rubber Clean Peel Pa s s Neoprene Rubber Clean Peel Pa s s Sa ntoprene Clean Peel Pa s s Rubber Butyl Rubber Clean Peel Pa s s L3+T5 Table 2 Water Immersion for 24 Room Temp / or Foam Tear Pa s s PU Ether Foam Foam Tear Pa s s XLPE Foam Foam Tear Pa s s Clean Peel Pa s s EPDM Foam Foam Tear Pa s s Nitrile Foam Clean Peel Pa s s Neoprene Foam Foam Tear Pa s s EPDM Rubber Clean Peel Fa i l Neoprene Rubber Clean Peel Pa s s Sa ntoprene Clean Peel Pa s s Rubber Butyl Rubber Clean Peel Pa s s

11 FCA PF-10770: Pressure Sensitive Cellular and Fibrous Materials L3 + T5 (Cont.) L3+T5 Table 2 Environmental Cycle Oz/in / or Foam Tear Pa s s PU Ether Foam Foam Tear Pa s s Foam Tear Pa s s Foam Tear Pa s s EPDM Foam Foam Tear Pa s s Nitrile Foam Clean Peel Pa s s Neoprene Foam Foam Tear Pa s s EPDM Rubber Clean Peel Fa i l Neoprene Rubber Clean Peel Pa s s Sa ntoprene Rubber Clean Peel Pa s s Butyl Rubber Clean Peel Pa s s

12 FCA PF-10770: Pressure Sensitive Cellular and Fibrous Materials Technical Information The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use Many factors beyond 3M s control and uniquely within user s knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user s method of application. Warranty, Limited Remedy, and Disclaimer Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence o r strict liability. This Industrial s and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001: 2000 standards 3 Industrial s and Tapes Division Converter Markets 3M Ce n te r, Bu ilding 225-3S-06 St. Pa u l, MN (Fa x) 3M is a trademark of 3M Company. Santoprene is a trademark owned by Exxon Mobil Corporation. 3M.com/converter 3M 2016 E (01/18)