Mineral Based Adhesive for Industrial Bonding
|
|
- Patrick Franklin
- 6 years ago
- Views:
Transcription
1 . Technical Information SILACOLL 150 Mineral Based Adhesive for Industrial Bonding SILACOLL 150 is a ready-to-use, incombustible adhesive based on soluble silicates. SILACOLL 150 is designed for automated gluing of fireproof materials. SILACOLL 150 is temperature resistant up to > 1000 C. It is water based and therefore fre e of organic solvents. SILACOLL 150 is pasty and can be applied either manually or by using pumps and dosage instruments. Depending on the substrates which have to be glued, SILACOLL 150 builds up a sufficient wet adhesion, in many cases making a static support during the drying out phase redundant. In order to cure properly, it is necessary for the water bound in SILACOLL 150 to be able to evaporate easily. If this is not possible due to constructional reasons (closed systems for example), we recommend mixing SILACOLL 150 with a hardener such as SILACOLL 800. This hardener ensures that SILACOLL 150 can cure properly. When fully cured, it is possible to achieve shear strength above 4 N/mm 2 with correct processing using appropriate substrates. After curing SILACOLL 150 is no longer ductile. SILACOLL 150: is absolutely incombustible is temperature resistant up to > 1000 C is VOC free is resistant to many chemicals is environmentally friendly is open to vapour diffusion Seite 1
2 Typical Applications SILACOLL 150 is very suitable for bonding mineral based materials, metal, wood and glass. A typical application is the mechanical gluing of various insulation boards. In systems where the water, bound in SILACOLL 150 is not able to evaporate (i.e. manufacturing of fireproof doors), it is recommended to add SILACOLL 800 as hardener, using a dosage system. Fire Classification The construction product SILACOLL 150 meets the criteria for the classification for Category A No contribution to fire. This classification is based on the COMMISSION DECISION of 6 June 2003 (2003/24/EC) amending Decision 96/603/EC establishing the list of products belonging to Class A No contribution to fire according to Decision 94/611/EC implementing Article 20 of Council Directive 89/ 106/EEC on construction products. Typical Physical Properties Appearance: beige Odour: characteristic Solid content: approx. 54% Flammability: incombustible ISO 1182 Rheology: thixotropic behaviour Viscosity: mpa*s Haake Rheometer, 20 C, 25 min, τ = Pa Density: 1.61 g/cm 3 bei 20 C Directions for Use Usually a single application of SILACOLL 150 will be sufficient. After application of the adhesive, both substrates should be joined and good pressure should be applied for a few seconds over the whole surface. Depending on the absorbency of the substrate the glue develops a necessary wet adhesion within a few seconds. The curing process for non-absorbing materials, such as metal, glass, etc. usually takes a little longer. On non-absorbing surfaces it is important for the substrate to be open for vapour diffusion (e.g. mineral wool). In systems where the water bound in SILACOLL 150 is not able to evaporate the curing process will not take place. In this case it is necessary to mix SILACOLL with a hardener such as SILACOLL 800 prior application. The ideal processing temperature is around 20 C and should al ways be between +5 C and 30 C. Also the relative air humidity should be between 20% and 80%. Low ambient humidity shortens the open time, high ambient humidity prolongs the curing time. SILACOLL 150 can be applied manually or with appropriate machinery. For manual application a notched trowel / blade is the most suitable. Seite 2
3 Surface Preparation The substrate must be free of dust, oil or grease, stable and dry. It is recommended to clean it with a soft broom or brush. It is not recommended to use SILACOLL 150 on surfaces with organic coatings. Consumption / Notched Trowel Depending on the way SILACOLL 150 is applied, and on the type of surfaces used (soaking / nonsoaking), the consumption is normally between 0.5 and 1.5 kg/m 2. For critical applications we recommend some preliminary tests prior to application. In case of special applications please contact the technical support of vanbaerle. Curing Time The following table contains empirical values. Data was obtained by gluing aluminium /aluminium. Time 23 C Remark Open time [Min] 5-8 Maximum time between application and fixing (time until skin formation) Early strength [Day] 5-10 Time recommended between gluing and further processing (approx. 50% of the final bonding strength achieved) Curing time [Day] Final bonding strength is reached It is recommended to process SILACOLL 150 at temperatures between 5 C and 30 C with 20-80% relative humidity. Cleaning Tools can be cleaned easily with water as long as the adhesive is not completely dry. Hot water dissolves SILACOLL 150 easier than cold water. The use of plastic equipment is highly recommended, since adhesion is stronger on metal than plastic. SILACOLL 150 etches glass irreversibly. Immediately rinse with plenty of water. Do not rub, as the fillers contained in SILACOLL 150 will scratch the glass. Typical Applications In order to assure perfect bonding and setting one of the substrates must be absorbent and vapour permeable. The following materials can be successfully glued with SILACOLL 150: Seite 3
4 Mineral based material Metal 1 Open pored foam of various polymers rock wool 2 and glass wool 3 glass ceramics, clay minerals fireclay bricks anodises aluminium sheet of metal and steel DOW Styrofoam IB-X Swisspor insulation board 6000 EPS 035 PW Swisspor EPS 80 mm Swisspor XPS Jackodur KF300 Gefiniert GL Wood wood fibre type panels Pavatex planed wood, not treated wood cork 1 All metallic surfaces must be free of any coatings such as varnish, powder coating, wax, oil or paint. 2 Rockfon Facette panels shall only be glued on absorbent surfaces 3 Except Isover Thermo-Plus and Iso-Swiss (brown) 4 As long as there is only a low content of organic glue on the surface. We recommend to always perform a preliminary adhesion test. For gluing where none of the materials is absorbent or vapour permeable it is recommended to add the hardener SILACOLL 800 to SILACOLL 150 prior to application. Storage SILACOLL 150 is sensitive to frost. With appropriate storage in the original and unopened containers at temperatures between +5 C and +30 C, SILACOLL 150 will remain stable for 2 years. Frozen adhesive can be made serviceable by intense mixing after defrosting. The surface liquid that can appear during storage must be homogenized by stirring before application. Packaging / Stability SILACOLL 110: Bucket of 15 kg stable for 2 years Drum of 270 kg stable for 2 years Classification and Safety Labelling according to regulation (EC) No 1272/2008 Hazard pictograms Seite 4
5 Signal word Warning Hazard statements H315 H319 Precautionary statements P262 P280 P302+P352 P332+P313 P305+P351+P338 P337+P313 Causes skin irritation. Causes serious eye irritation. Do not get into eyes, on skin, or on clothing. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of soap and water. If skin irritation occurs: Get medical advice/attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. For more detailed information please consult the relevant material safety data sheet (see ). Seite 5
6 vanbaerle Your partner for high quality silicates. In 1888, vanbaerle started out as a soap factory. Ten years after its foundation, the company moved to its present location in Münchenstein and developed into a dynamic and innovative enterprise. With its business units Hygiene and Silicates, it is represented in more than 50 countries in Europe, Asia and North America. The company has 134 employees in its headquarters and its affiliated companies. The production plants of the business units Hygiene and Silicates, the laboratories for development, application technology and quality management, as well as the warehouses and the administration buildings are all located at the Münchenstein site. We have been transforming basic minerals into valuable products for more than 100 years. During this time, we have optimized established products and introduced many innovations. Today, silicates are important additives for a whole range of industries and can be found in many products. Silicates are used in welding rods, waste paper recycling, and detergents. They can bind pigments and cement, glue materials and protect and isolate buildings. And the good news is that the list of applications keeps constantly growing. Legal notice The technical details and recommendations are based on the best of our knowledge and they presume a proper storage and usage of the products. Due to the variety of possible substrates, materials and working conditions a guarantee or a liability can not be taken for the work result, whatever the legal relationship is. Before each use, the products must be tested for their suitability for the intended application and purpose. In any case, the user is responsible for the consequences arising from the use of the products. Your contact Daniel Wack Tel daniel.wack@vanbaerle.ch vanbaerle AG Schützenmattstrasse 21 CH-4142 Münchenstein The above mentioned information is based on the current knowledge and may change according to technical progress. No guarantee on product data. vanbaerle AG. Tel Seite 6
Mineral Based Adhesive for industrial Bonding
. Technical Information SILACOLL 160 Mineral Based Adhesive for industrial Bonding SILACOLL 160 is a ready-to-use, incombustible adhesives based on soluble silicates. SILACOLL 160 is designed for automated
More informationData sheet Armatop A - new / Page 1. Areas of application Bonding Bonding of mineral wool, polystyrene and cork external wall insulation boards.
Data sheet Armatop A - new / Page 1 Armatop A - new Bonding and reinforcing compounds for alsecco external wall systems Areas of application Bonding Bonding of mineral wool, polystyrene and cork external
More informationTechnical Data Sheet Rhenopox EB 06.1 Art. no.: A 5198
version: 2016/06 page 1 of 5 Rhenopox EB 06.1 (2k Epoxy Color Traffic Zone) component A Art. no.: A 5198 - Products consist of a mixture of component A = Rhenopox EB 06.1 and component B = Rhenopox EH
More informationSafety Data Sheet SAGLAN / PIPELANE
1. Product name and manufacturer's address Product name SAGLAN PIPELANE Fibre-glass wool (in the following document reference to the name SAGLAN also applies to PIPELANE) Manufacturer SAGER AG Dämmstoffe
More informationDiescolith SOL-Silikat
Highly diffusible SOL silicate paint according to DIN 18363 Silica sol silicate base Tribrid formula Variety of applications Highly weather-resistant Highly water-repellent Highly diffusible UV-light-resistant
More informationReady-to-use structural plaster for interior use
Ready-to-use structural plaster for interior use Very easy to spread Very robust and hard-wearing surface Uniform Fibre-reinforced, low-stress Easy and flexible to handle Environmentally friendly, low-odour
More informationData sheet Armatop MP / Page 1
Data sheet Armatop MP / Page 1 Armatop MP Bonding and reinforcing compounds for alsecco external wall systems Areas of application Bonding Bonding of ecomin-por, mineral wool, polystyrene and cork exterior
More informationAKS Coatings GmbH. A new Generation of protective surface coatings. Technical Data Sheet 01/01/2014 AKS PS POLYMER SILICATE COATING MORTAR
Technical Data Sheet 01/01/2014 AKS PS POLYMER SILICATE COATING MORTAR Product Description AKS-PS it a 2 or 3 component, solvent free polymer-silicate, trowel applied Performance Coating which offers optimum
More informationHomogenous cement-based powder, modified with high quality polymers and cellulose additives.
Page: 1 от 5 (winter formula) adhesive mortar solution for bonding thermo insulation EPS/XPS boards on different bases when thermo-insulating buildings, in mild winter conditions (temperatures from 0 C
More informationSegmental bridge adhesive
Product Data Sheet Edition 16/07/2014 Identification no: 02 02 04 03 001 0 000004 (Template for local translation, only for internal use) Segmental bridge adhesive Construction Product Description Uses
More informationDMS EP-D80 Broadcasted Epoxy Resin Floor
Product description DMS EP-D80 system is a three component epoxy system, designed as epoxy binder containing special fire retardant additives and mineral fillers, such as quartz or granulated granite.
More information1 Identification of the substance/mixture and of the company/undertaking
Page 1 of 5 1 Identification of the substance/mixture and of the company/undertaking Product identifier Trade name: IKOPRO Algae and Funghi Remover Relevant identified uses of the substance or mixture
More informationScotch-Weld Heat-Curing Paste Adhesive EC9360
Scotch-Weld Product Data Sheet Updated : November 1993 Supersedes : June 1991 Product Description 9360 Epoxy Adhesive highly toughened for metal to metal and composite bonding. It is a one part 100% solids
More informationPU PRIMER 870 TRANSPARENT, ONE COMPONENT, POLYURETHANE-BASED PRIMER, USED AS AN ADHESIVE COMPONENT FOR SAFEPOL MULTICOLOR 859
PU PRIMER 870 EDITION: SEPTEMBER 2013 TRANSPARENT, ONE COMPONENT, POLYURETHANE-BASED PRIMER, USED AS AN ADHESIVE COMPONENT FOR SAFEPOL MULTICOLOR 859 GENERAL CHARACTERISTICS POLYURETHANE PRIMER 870 is
More informationTECHNICAL DATA SHEET SIKADUR 31 RAPID 1.2KG
TECHNICAL DATA SHEET SIKADUR 31 RAPID 1.2KG Sikadur -31 is a two component solvent free, cold cure, thixotropic epoxy adhesive suitable for damp and dry substrates. Available in two grades - 31CF Normal
More informationcl stuk Technical Sheet Recommended use Materials Substrate
Technical Sheet cl stuk cl-stuk is a latex which, mixed with cement-based grouts such as colorstuk n, reduces water absorption and enhances mechanical resistance and deformability. Specially recommended
More informationConstruction. Sodium silicate based surface hardener, dustproofer, sealing and curing compound for concrete. Product Description.
Construction Product Data Sheet Edition 19 November 2012 Sikafloor -CureHard-24 Sodium silicate based surface hardener, dustproofer, sealing and curing compound for concrete Product Description Sikafloor
More informationPRODUCT DATA SHEET Sikadur 31 CF Normal (formerly Sikadur 731)
PRODUCT DATA SHEET (formerly Sikadur 731) 2-part Thixotropic Epoxy Adhesive PRODUCT DESCRIPTION Sikadur-31 CF Normal is a solvent-free, moisture tolerant, thixotropic, structural two part adhesive and
More informationSAFETY DATA SHEET. Not classified as hazardous according to criteria of Australian Safety and Compensation Council
Page 1/5 1. Identification of the Substance / Mixture and of the Company / Undertaking Product Identifier Trade Name: Albrecht Durer Artist Pencils 18-117??? Relevant Identified Uses of the Substance or
More informationTechnical Data Sheet Sto-RFP
Organic, cement-free reinforcing compound/base coat, ready-to-use Characteristics Properties Information/notes Exterior and interior On to organic and mineral substrates As a reinforcing compound for StoTherm
More informationSafety data sheet according to 1907/2006/EC, Article 31
Page 1/6 SECTION 1: Identification of the substance/mixture and of the company/ undertaking 1.1 Product identifier Colloidal Graphite - Aquadag Article number: AGG303 1.2 Relevant identified uses of the
More informationXP350 Self Levelling Smoothing Compound 3-50mm, 25kg
XP350 Self Levelling Smoothing Compound 3-50mm, 25kg DESCRIPTION: StoneFix XP350 Self Levelling Smoothing Compound is a free flowing, self smoothing, protein/casein free, floor levelling compound, blended
More informationProduct Data Sheet Product n Description Uses tio tru Characteristics / C Advantages Tests Approval / Standards
Product Data Sheet Edition 01/02/2012 Identification no: 01 04 02 03 001 0 000039 Sikadur -31 CF Normal 2-part thixotropic epoxy adhesive Construction Product Description Uses Characteristics / Advantages
More informationISOVANILLIN Syn: (3-Hydroxy-p-anisaldehyde)
ISOVANILLIN Syn: (3-Hydroxy-p-anisaldehyde) MOLECULAR FORMULA : C 8 H 8 O 3 CAS No. 621-59-0 MOLECULAR WEIGHT : 152.15 TESTS 1. DESCRIPTION: SPECIFICATIONS Off-white to Beige solid free from visible impurities.
More informationFastbond 40 Water Based Liquid Adhesive (formerly 9313) High Viscosity, Roll Coatable, Contact Adhesive
Fastbond 40 Water Based (formerly 9313) High Viscosity, Roll Coatable, Contact Adhesive Product Data Sheet Updated : July 1997 Supersedes : March 1996 Product Description Fastbond 40 is a flexible, high
More informationKALT COLD. Instructions for TOPGUM COLD cement
Instructions for TOPGUM cement H Reisholzstraße 15 40721 Hilden Tel. +49 (0) 21 03-951 - 0 Fax National +49 (0) 21 03-951 - 209 Fax International +49 (0) 21 03-951 - 219 info@nilos.com www.nilos.com Instructions
More informationTECHNICAL DATA SHEET SIKADUR 31 CF NORMAL 6KG
TECHNICAL DATA SHEET SIKADUR 31 CF NORMAL 6KG Sikadur 31 is a two component solvent-free, cold cure, thixotropic epoxy adhesive suitable for damp and dry substrates. Available in two grades - Normal and
More informationMasterBrace ADH Thixotropic adhesive recommended for structural bonding of the MasterBrace LAM.
DEFINITION OF THE MATERIAL MasterBrace ADH 4000 is a two-part solvent-free thixotropic epoxy resin featuring high bonding strength to various types of substrate. MAIN FIELDS OF APPLICATION MasterBrace
More informationDAP WELDWOOD Nonflammable Contact Cement
DAP WELDWOOD Nonflammable Contact Cement PRODUCT DESCRIPTION DAP WELDWOOD Nonflammable Contact Cement is a high-solids polychloroprene-based, waterborne contact adhesive that specifically meets the stringent
More informationDAP WELDWOOD Nonflammable Contact Cement
DAP WELDWOOD Nonflammable Contact Cement PRODUCT DESCRIPTION DAP WELDWOOD Nonflammable Contact Cement is a high-solids polychloroprene-based, waterborne contact adhesive that specifically meets the stringent
More information: PLASTIC ADDITIVE 18 CRS
Date of issue: 28/01/2014 Revision date: Supersedes: 27/06/2013 Version: 5.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Substance
More informationMATERIAL SAFETY DATA SHEET
Produced date: 2012-07-06 1. Identification of the substance/preparation and the company Commercial product name Use of the substance/preparation Propylene carbonate Solvent Synonyms 1,2-propandiol, cyclic
More informationGood properties on otherwise difficult to bond substrates. High impact resistance over a wide temperature range
Advanced Materials Araldite 2047-1 Structural Adhesives TECHNICAL DATA SHEET Araldite 2047-1 Methacrylate adhesive requiring minimal surface pretreatment Key properties Gap filling Good properties on otherwise
More information3-part thixotropic epoxy patching mortar
Product Data Sheet Edition 28/08/2006 Identification no: 02 04 02 03 001 0 000044 3-part thixotropic epoxy patching mortar Construction Product Description Uses Characteristics / Advantages Sikadur -41
More informationConcrete Paint and Varnish
www.teknos.com DATA SHEET 1247 12 22.02.2017 TEKNOFLOOR AQUA 110F Concrete Paint and Varnish PAINT TYPE USAGE SPECIAL PROPERTIES TEKNOFLOOR AQUA 110F Concrete Paint is a water-based, two-pack epoxy paint.
More informationRITIVEX R LIQUID 1102
RITIVEX R LIQUID 1102 EDITION: SEPTEMBER 2013 ADHESIVE, ACRYLIC RESIN FOR MULTIPLE USES GENERAL CHARACTERISTICS Acrylic, adhesive, joining resin, water - diluted. It is combined with all cementitious mortars
More informationBONDEX Premium Product Code Product Name Recommended for Available sizes
BONDEX Premium Product Code Product Name Recommended for Available sizes 330045 Bondex Premium All types of indoor and outdoor wood 0.75 L - 2.50 L 1 Product Description 1.1 Product Type: 1.2 Manufacturer:
More informationMaterial Safety Data Sheet according to Regulation (EC) 1907/2006
1. Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier AUTOL TOP 2000 1.2 Relevant identified uses of the substance or mixture and uses advised against Relevant
More informationE.MIX MOISTURE SEALER
E.MIX Super Fast Fix Fast setting, high performance, high strength, highly flexible, strong polymerized thin bed tile adhesive for interior and exterior wall tile fixing complied with C2FTE class of EN
More informationSAFETY DATA SHEET according to 1907/2006/EC, Article 31
SAFETY DATA SHEET according to 1907/2006/EC, Article 31 SECTION 1: Identification of the substance/mixture and of the company/undertaking Page 1/6 3 1.1. Product identifier Product name Product code H090
More information: Zerust AxxaClean 2048 Brush-On
SECTION 1: Identification 1.1. Identification Product form Name Synonyms 20-341 Date of issue: 15/02/2017 Revision date: 15/02/2017 Supersedes: 27/05/2015 Version: 4.1 : Mixtures Other means of identification
More information3 Nitomortar PE CI/SfB: (4-) Pr4 December 1999
FM 610 3 High strength jointing and multi-purpose repair compounds Uses For fast and emergency reinstatement of concrete, bedding, jointing and reprofiling of concrete, masonry and brickwork. is ideally
More informationSpeical, substrate-tolerant primer
Speical, substrate-tolerant primer Availability Quantity per pallet 120 Packaging unit 2,5 kg 10 kg 25 kg Type of container Tin bucket Tin bucket Container code 03 11 26 Art. no. 0916 6364 See application
More informationSMET NHL 2 Feebly Hydraulic Lime Binder
SMET NHL 2 Feebly Hydraulic Lime Binder SMET NHL 2 is a high quality pure Natural Hydraulic Lime binder, produced under an ISO 9001:2008 and ISO 14001:2004 quality system to EN 459-1. The feeble hydraulic
More informationProduct Data Sheet Sikadur -31 CF Normal Product Description Uses ruction Const Characteristics / Advantages
Construction Product Data Sheet Edition 02/12/2013 Identification no: 02 04 02 03 001 0 000039 Sikadur -31 CF Normal 2-part thixotropic epoxy adhesive Product Description Uses Characteristics / Advantages
More informationMasterSeal M 861 (Formely known as Conipur M 860 Thix)
DESCRIPTION OF PRODUCT MasterSeal M 861 is a two component, solvent free, thixotropic, polyurethane based waterproofing membrane with crack bridging capability for vertical surfaces. Complies with EN 1504-2
More informationPage 1 of 5 According to: 1907/2006/EC, Article 31 Revision Date: 24/02/2017 Revision No: 7. SAFETY DATA SHEET AltroFix 365
Page 1 of 5 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY 1.1 Product Identifier Product name: AltroFix TM 365 1.2 Relevant identified uses of the substance or mixture and uses advised
More informationSafety Data Sheet according to HPR, Schedule 1
Page 1/8 * 1 Identification Product identifier Article number: 39311 Application of the substance / the mixture Adhesives Details of the supplier of the safety data sheet Manufacturer/Supplier: SEM Products
More informationSafety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations. H320 - Causes eye irritation
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Spray Wet : M77455 1.2. Relevant identified
More informationSimalfa 900-PU. Product Description. Key Properties. Certifications. Physical Properties
Revised: 2.27.2013 Simalfa 900-PU Product Description SIMALFA 900-PU is a high yielding and fast drying water based adhesive based on polyurethane dispersions that can be used in a wide variety of applications.
More informationTechnical Data Sheet StoLevell Duo plus
Mineral bonding and reinforcing mortar Characteristics Areas of application Properties Exterior and interior For all mineral substrates For bonding insulation boards onto mineral substrates For producing
More informationTwo component flexible polyurethane adhesive. Property Component A (resin) Component B (hardener) Mixed Adhesive
Advanced Materials Araldite 2045 Structural Adhesives TECHNICAL DATA SHEET Araldite 2045 Two component flexible polyurethane adhesive Key properties Ideal for bonding plastics Good flexibility Ideal for
More informationBlome Sealant 55MT Flexible, Moisture-tolerant Epoxy Novolac Joint Sealant
Blome Sealant 55MT Flexible, Moisture-tolerant Epoxy Novolac Joint Sealant PRODUCT DESCRIPTION Blome Sealant 55MT is a two-component, moisture-tolerant, 100% solids epoxy novolac elastomer with excellent
More informationTDS. TECHNICAL DATA SHEET TECNOFLOOR Tw-3040 v / 6
1 / 6 TECNOFLOOR TW-3040 - TWO COMPONENT, AROMATIC, EPOXY WATER BASED RESIN FOR FLOORING Pigmented and fluid coating, epoxy water based on medium chemical and mechanical resistance, presented in two-component,
More informationPOLAPLAST P10 POLYURETHANE PRIMER ONE-COMPONENT EDITION: SEPTEMBER 2013
EDITION: SEPTEMBER 2013 POLAPLAST P10 POLYURETHANE PRIMER ONE-COMPONENT GENERAL POLAPLAST P10 is a low viscosity, moisture curing, clear, polyurethane-based, one-component resin with good long term elasticity.
More informationConstruction. Easy Clean, solvent & isocyanate free, elastic adhesive for full surface bonding of wood flooring. Product Description.
Product Data Sheet Edition 31/03/2010 Identification no: 01 05 02 02 150 0 000001 SikaBond AT-80 Easy Clean, solvent & isocyanate free, elastic adhesive for full surface bonding of wood flooring Construction
More informationConstruction. Easy Clean, solvent & isocyanate free, elastic adhesive for full surface bonding of wood flooring. Product Description.
Product Data Sheet Edition 31/03/2010 Identification no: 01 05 02 02 150 0 000001 SikaBond AT-80 Easy Clean, solvent & isocyanate free, elastic adhesive for full surface bonding of wood flooring Construction
More informationBlome Sealant 55MT Flexible, Moisture-tolerant Epoxy Novolac Joint Sealant
Blome Sealant 55MT Flexible, Moisture-tolerant Epoxy Novolac Joint Sealant PRODUCT DESCRIPTION Blome Sealant 55MT is a two-component, moisture-tolerant, 100% solids epoxy novolac elastomer with excellent
More informationProduct Data Sheet. Description. Uses. Suitable Surfaces. Polymer enhanced, pre-blended, bag mix, coarse float render.
Product Data Sheet Render MaxiCoarse Polymer enhanced, pre-blended, bag mix, coarse float render. Description MaxiCoarse Render is a pre-blended, polymer fortified cement based render mix, formulated to
More informationRITIVEX R LIQUID 1102
RITIVEX R LIQUID 1102 EDITION: SEPTEMBER 2013 ADHESIVE, ACRYLIC RESIN FOR MULTIPLE USES GENERAL CHARACTERISTICS Acrylic, adhesive, joining resin, water - diluted. It is combined with all cementitious mortars
More informationISO NICOTINIC ACID CAS NO MATERIAL SAFETY DATA SHEET SDS/MSDS
ISO NICOTINIC ACID CAS NO 55-22-1 MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : Iso Nicotinic
More informationMapetherm AR1 Light. Lightweight one-component cementitious mortar FOR THERMAL INSULATION WITH SUPERIOR LIGHTNESS AND ASTONISHING PERFORMANCE
Mapetherm AR1 Light Lightweight one-component cementitious mortar FOR THERMAL INSULATION WITH SUPERIOR LIGHTNESS AND ASTONISHING LIGHTWEIGHT Mapetherm AR1 Light One-component, lightweight cementitious
More informationSafety use instruction sheet
Safety use instruction sheet 1. Company and product identification 1.1 Product: ISOVER rolls, slabs and board products of bio-soluble glass fibres, for industrial application 1.2 Field of application:
More informationConstruction. Sikafloor -CureHard -24 Transparent Surface Hardener, Dustproofer, Sealing and Curing Compound for Concrete. Product Description Uses
Product Data Sheet Version 16/01/2014 (Corporate : Edition 27/7/2010) Sikafloor -CureHard -24 Transparent Surface Hardener, Dustproofer, Sealing and Curing Compound for Concrete Construction Product Description
More informationAraldite AW4858/ Hardener HW4858
Advanced Materials Araldite AW4858/ Hardener HW4858 Structural Adhesives ARALDITE AW4858/ Hardener HW4858 Two component epoxy adhesive system Key properties Very high lap shear and peel strength Bonds
More informationAraldite AW4858/ Hardener HW4858
Advanced Materials Araldite AW4858/ Hardener HW4858 Structural Adhesives ARALDITE AW4858/ Hardener HW4858 Two component epoxy adhesive system Key properties Very high lap shear and peel strength Bonds
More information: PLANT HEALTH technologies Fortify
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : PLANT HEALTH technologies Fortify : M77886 Other
More informationMultipurpose latex additive for mortar and cementitious adhesive
SGBPDC-12-081 Multipurpose latex additive for mortar and cementitious adhesive USES For the preparation of high performance mortar, screeds and renders. Typical application Screeds and levelling compounds
More informationOleic Acid Ph Eur MSDS
Oleic Acid Ph Eur MSDS S a f e t y D a t a S h e e t According to Regulation (EC) 1907/2006 2659 Oleic Acid 1. Identification of the substance/preparation and of the company or firm 1.1 Identification
More informationMaterial Safety Data Sheet. PROFINISZ / PROFINISZ AKORD Farby KABE. MATERIAL SAFETY DATA SHEET Made in accordance with EU Regulation No.
PROFINISZ / PROFINISZ AKORD Farby KABE MATERIAL SAFETY DATA SHEET Made in accordance with EU Regulation No. 453/2010 Date issued/updated: 10-09-2010 /01-06-2015 Issue no. 4 SECTION 1: IDENTIFICATION OF
More informationParabond 600 Elastic adhesive sealant with high initial bonding strength.
Parabond 600 Elastic adhesive sealant with high initial bonding strength. Product: Parabond 600 is an MS-polymer based, durable and fast curing elastic adhesive. Applications: Parabond 600 has a very high
More informationSAFETY DATA SHEET Revised edition no : 1 SDS/MSDS Date : 12 / 9 / 2012
Page : 1 1. Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Trade name : Product code : Identification of the product : Calcium chloride CAS No :10043-52-4
More informationData Sheet 832 Englisch
Englisch Primer LF 832 Floortec 2K-Epoxi-Grund LF 832 solvent-free, transparent primer resin as primer in Floortec PUR Coating System and under Floortec 2C Epoxy Thick Layer LF 834 Properties Solvent-free,
More information2 pack Polyurethane grout for rail fixing
Product Data Sheet Edition 11/05/2011 Icosit KC 340/65 2 pack Polyurethane grout for rail fixing Product Description Uses Characteristics / Advantages Icosit KC 340/65 is a flexible two-component polymer
More informationSIGMAZINC 158. Revision of September 2008 DESCRIPTION. two component moisture curing zinc (ethyl) silicate primer PRINCIPAL CHARACTERISTICS
5 pages Revision of September 2008 DESCRIPTION PRINCIPAL CHARACTERISTICS COLOURS AND GLOSS BASIC DATA AT 20 C Mass density Volume solids VOC (supplied) Recommended dry film thickness Theoretical spreading
More informationParabond 600 Elastic adhesive sealant with high initial bonding strength.
Parabond 600 Elastic adhesive sealant with high initial bonding strength. Product: Parabond 600 is an MS-polymer based, durable and fast curing elastic adhesive. Applications: Parabond 600 has a very high
More informationMulti Surface Glass Cleaner- 3322, 3324, 3326
Revision date: 10/15/2015 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product name : Multi Surface Glass Cleaner- 3322,
More informationSafety Data Sheet-ICT Clean and Set
1 PRODUCT IDENTIFICATION Product Name: ICT CLEAN & SET Product Number: ICTCAS5G Product Use: Concrete sealant/ cleaner DATE PREPARED: 12-1-2016 COMPANY: Buddy Rhodes Concrete Products 5600 Lower Macungie
More informationScotch-Weld 2000-NF Contact Adhesive and Spray Activator
Scotch-Weld 2000-NF Contact Adhesive and Spray Activator Product Data Sheet Updated : October 2006 Supersedes : August 2000 Product Description Scotch-Weld 2000-NF Adhesive and Activator is a water-dispersed,
More informationRITIVEX R LIQUID 1102
RITIVEX R LIQUID 1102 EDITION: SEPTEMBER 2013 ADHESIVE, ACRYLIC RESIN FOR MULTIPLE USES GENERAL CHARACTERISTICS Acrylic, adhesive, joining resin, water - diluted. It is combined with all cementitious mortars
More informationHYDRAULIC GATE SEALS. Industrial Rubber Supply (1995) Ltd.
Industrial Rubber Supply (1995) Ltd. Manufacturers of Quality Industrial Products 55 Dunlop Avenue, Winnipeg, Manitoba, Canada R2X 2V2 Phone (204) 694-4444 - Fax (204) 632-6767 - www.indrub.com ISO 9001:2000
More informationSafety Data Sheet SCT-483. Tridecyl Ether Sulfate. Surfactant Cust# 8812
Safety Data Sheet 1. Product Identification a. Product Name: b. Chemical Description: c. Product Uses: d. Emergency Number: e. Manufacturer: SCT-483 Tridecyl Ether Sulfate Surfactant 800-633-8253 Cust#
More informationAQUATEK Impercem 10HB
AQUATEK Impercem 10HB Rigid waterproofing mortar Product Description AQUATEK Advantages Impercem 10HB is a rigid, cement based mortar for waterproofing of concrete and masonry. High adhesion and performance
More informationPRODUCT DATA SHEET Sikadur -32 Normal
PRODUCT DATA SHEET 2-COMPONENT STRUCTURAL EPOXY BONDING AGENT PRODUCT DESCRIPTION is a moisture tolerant, structural, two part bonding agent, based on a combination of epoxy resins and special fillers,
More informationproduct information this document contains
Technical Information A quality, cost efficient, high performance hygenic wall and ceiling systems that you can rely on. Our comprehensive cladding range offers a dependable, simple and attractive solution.
More informationSECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : Aluminium Ammonium Sulphate
Aluminium Ammonium Sulphate CAS No 7784-26-1 MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name :
More informationSECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : Cesium Carbonate
Cesium Carbonate CAS No 534-17-8 MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : Cesium Carbonate
More informationAraldite AW4858/ Hardener HW4858
Advanced Materials Araldite AW4858/ Hardener HW4858 Structural Adhesives Araldite AW4858/ Hardener HW4858 Two component epoxy adhesive system Key properties Very high lap shear and peel strength Bonds
More informationSECTION 1 COMPANY & PRODUCT IDENTIFICATION
MATERIAL SAFETY DATA SHEET Date: 02/02/2015 SECTION 1 COMPANY & PRODUCT IDENTIFICATION Supplier: Eurotech Address: 72 John ST, Welshpool, WA, 6106 Phone: +61 (0)8 93506161 Email: info@eurotech.com.au Product:
More informationMARMOCRYL SILICONE Fine
Technical Datasheet Fine Silicone, pasty, ready-to-use render Smooth finish White or colored Water-repellent Description Fine is a ready-touse, pasty, white or colored, silicone acrylic render. It consists
More information: Ez Green Cut. Safety Data Sheet. H319 - Causes serious eye irritation
SECTION 1: Identification of the substance/mixture and of the company/understaking 1.1. Product identifier Product name. : Ez Green Cut 1.2. Relevant identified uses of the substance or mixture and uses
More informationSafety Data Sheet.
1 Identification of the substance/preparation and of the company/undertaking Product details Product category: Trade name: Application/preparation of the substance: Manufacturer/Supplier: Further information
More informationSafety Data Sheet. according to Regulation (EC) No 1907/2006. KaVo Kalkloeser. Print date: Page 1 of 7
Print date: 05.02.2015 Page 1 of 7 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product code: Product group: 0.489.3018 Verkaufsprodukt 1.2.
More informationThis document is meant purely as a documentation tool and the institutions do not assume any liability for its contents
1996D0603 EN 12.06.2003 002.001 1 This document is meant purely as a documentation tool and the institutions do not assume any liability for its contents B COMMISSION DECISION of 4 October 1996 establishing
More informationSAFETY DATA SHEET Revised edition no : 1 SDS/MSDS Date : 8 / 12 / 2012
Page : 1 1. Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Trade name : Product code : Identification of the product : Butyrolactone gamma CAS No :96-48-0
More informationLow Viscosity, Solvent Free Elastic Adhesive for Wood Flooring. Solvent free Odourless Recyclable tin pail EMICODE EC 1 PLUS R, very low emission
Construction Product Data Sheet Edition: 21/11/2012 Identification no: 02 05 02 01 550 0 000001 Version : GCC Low Viscosity, Solvent Free Elastic Adhesive for Wood Flooring Product Description Uses Characteristics
More informationSAFETY DATA SHEET Revised edition no : 0 SDS/MSDS Date : 12 / 7 / 2012
Page : 1 1. Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Trade name : Product code : Identification of the product : Ácido nicotínico CAS No :59-67-6 1.2.
More informationPRODUCT DATA SHEET. Sikafloor -CureHard-24 PRODUCT DESCRIPTION. Transparent surface hardener, dustproofer, sealing and curing compound for concrete
PRODUCT DATA SHEET Transparent surface hardener, dustproofer, sealing and curing compound for concrete PRODUCT DESCRIPTION is a one part, clear liquid based on sodium silicate to cure, harden and seal
More informationSafety data sheet according to 1907/2006/EC, Article 31
Page 1/5 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier Article number: 86950 1.2 Relevant identified uses of the substance or mixture and uses
More information