DRUM MOTOR 138LS 138.5Ø 0.10kW kW, with steel helical gearbox
|
|
- Nathan Beasley
- 6 years ago
- Views:
Transcription
1 8 DRUM MOTOR DRUM MOTOR 18LS 18.5Ø 0.10kW kW, with steel helical gearbox Product description The drum motor 18LS is a very fl exible component thanks to the wide range of powers and speeds. Characteristics Salt water resistant aluminum bearing housing Induction motor three phases alternating current Dual voltage Integral motor protection Steel- hardened helical spur gear Low noise operation Maintenance free Lifetime lubrication Reversible operation Reinforced shaft for RL greater than 800 mm Applications Conveyors for heavy and frequent use Conveyors for transportation of packages Logistics applications Check-in desks at airports Conveyors for furniture manufacture Manufacturing of food processes Modular belts, steel or plastic applications Dry, damp and frequent wash down applications TECHNICAL DATA Motor Data Type of Motor Asynchronous squirrel-cage, IEC (VDE 050) Insulation class of motor windings Class F, IEC (VDE 050) Derated windings (0% power reduction) On request for applications without belt Voltage 0/00 V ± 5% (IEC /8) Special voltage on request Frequency 50/60 Hz Internal shaft sealing system Double-lipped FPM or nitrile rubber, NBR Protection rate IP66 Thermal protection Bimetallic Contact Ambient temperature, -phase motor -5 to +0 C General technical data Max. Roller length (RL) 1800 mm All data and values declared in the catalogue refer to operation with a frequency of 50 Hz.
2 18LS SERIES 9 DRUM MOTOR 18LS 18.5Ø 0.10kW kW, with steel helical gearbox LIGHT INDUSTRIAL Materials The following drum motor components are available in different versions, as shown in the below chart, with further options for the material type as indicated. Components Version Shell End housing Shaft Electrical connection Material Aluminium Steel Stainless Steel Brass /Nickel Polymer Crowned Std TS8N Cylindrical Std TS8N Cylindrical + key (for sprockets) Std TS8N Special crowns and grooves Std TS8N Standard Std TS8N With V-grooves Std TS8N With O-grooves Std TS8N With chain sprockets Std TS8N Standard Std TS8N Cross-drilled and threaded, M8 Std TS8N Straight connector TS8N Elbow connector TS8N Terminal box Std TS8N Std Std INDUSTRIAL OPTIONS Please contact Rulmeca for further versions. TS8N Version - End Caps in stainless steel with PTFE lip seals. Options Rubber Lagging for standard belts Profi led lagging for plastic modular belts Profi led lagging for thermoplastic belts Sprockets for plastic modular belts Backstop / Anti run-back bearing Electromagnetic brake Rectifi ers Encoder Food-grade Oil (EU, FDA and USDA) Non-horizontal mounting (more than ± 5 ) TS8N with mild steel shell is possible Dynamical balancing Note The combination of encoder and electromagnetic brake is not possible. Accessories Mounting brackets Idler Pulleys Rollers for conveyors Frequency Converters ACCESSORIES PLANNING SECTION
3 0 DRUM MOTOR DRUM MOTOR 18LS 18.5Ø 0.10kW kW, with steel helical gearbox TECHNICAL DATA DRUM MOTOR 18LS - PHASE - 50HZ - STANDARD [kw] (rpm) I f [A] gs i V A V N n A [min -1 ] M N [Nm] F T TE RL (0) 8 (670) 6 (90) 6 (95) (100) (70) (165) (85) (810) 1./0.75.0/ / min 00 min 00 min 00.5/ min / min /1..6/.1.1/1.8.1/ min 00 min 0 min 50
4 18LS SERIES 1 DRUM MOTOR 18LS 18.5Ø 0.10kW kW, with steel helical gearbox rpm I f gs i V A V N n A [kw] (rpm) 6 (90) (180) (70) (115) I f [A] 1.15/ / /1.0.7/1.55 TECHNICAL DATA DRUM MOTOR 18LS - PHASE - 50HZ - DERATED gs Nominal mechanical power Number of poles Actual rotor rpm at full load Amperage (0/00V) at full load Gear stages Gear ratio Theoretical actual belt (tangential) speed at full load* Nominal belt (tangential) speed Revolutions of shell at full load* i V A V N n A [min -1 ] M N [Nm] F T TE 800 RL min min M N Nominal Torque at full load F T Belt pull (tangential force) on shell at full load* TE Maximum allowable belt tension (radial load) RL Reference length * Valid for unlagged shells/ values can deviate at partly or no load conditions 650 min 00 min 0 LIGHT INDUSTRIAL INDUSTRIAL OPTIONS ACCESSORIES PLANNING SECTION
5 DRUM MOTOR DRUM MOTOR 18LS 18.5Ø 0.10kW kW, with steel helical gearbox Standard weight data drum motor 18LS Standard weight [kg] for standard RL Idler (UT18LS) Cable specification Available cable options: Standard, screened Standard, unscreened Halogen-free, screened Halogen-free, unscreened Available lengths: 1//5 m. Min. length with option The following options increase the minimum length of the drum motor Option RL min with option mm Brake RL min mm Encoder SKF RL min. + 0 mm Encoder RLS RL min mm
6 18LS SERIES DRUM MOTOR 18LS 18.5Ø 0.10kW kW, with steel helical gearbox OPTIONS PLANNING SECTION ACCESSORIES LIGHT INDUSTRIAL INDUSTRIAL Drum motor with straight connector in stainless steel Drum shell shape ØA ØB Crowned Cylindrical Cylindrical with key Shaft dimension Width across flats H K C Ø0mm Drum motor with key x Standard shaft
7 DRUM MOTOR DRUM MOTOR 18LS 18.5Ø 0.10kW kW, with steel helical gearbox Straight connector in brass or stainless steel Elbow connector in stainless steel Elbow connector in polyamide Cable connector 90 with threaded shaft Cross-drilled and threaded shaft Terminal box in stainless steel
DRUM MOTOR 216LS 216.0Ø 0.11kW kW, with steel helical gearbox
5 DRUM MOTOR UNIT HANDLING Product description The drum motor 16LS is able to provide high torques and withstand high radial loads. Characteristics Salt water resistant aluminum bearing housing Induction
More informationDRUM MOTOR 220M-H 216.0Ø 0.37kW - 5.5kW, with steel helical gearbox
58 DRUM MOTOR UNIT HANDLING Product description Drum motor very robust able to provide high torques and withstand high radial loads Characteristics Salt water resistant aluminum bearing housing Induction
More informationDRUM MOTORS UNIT HANDLING. Moving ahead.
DRUM MOTORS UNIT HANDLING Moving ahead. Rulmeca - Moving ahead. Since its foundation in 1962, the Rulmeca Group, headquartered in Bergamo (Almé), Italy, has grown to become one of the world s leading
More informationDRUM MOTOR 113LS 113.5Ø 0.035kW kW, with steel helical gearbox
0 DRUM MOTOR UNIT HANDLING DRUM MOTOR 11LS 11.5Ø 0.05kW - 0.55kW, wth steel helcal gearbox Product descrpton Ths drum motor has been desgned specf cally for applcatons that requre a strong drve. Characterstcs
More informationINSPIRED BY EFFICIENCY CATALOG DRUM MOTORS DM 0080 DM 0113 DM 0138
INSPIRED BY EFFICIENCY CATALOG DRUM MOTORS DM 0080 DM 0113 DM 0138 Symbols Contents "Inspired by Efficiency" Smart handling of resources is mandatory for Interroll. Because we are convinced that efficiency
More informationINSPIRED BY EFFICIENCY CATALOG DRUM MOTOR DM 0080 DM 0113
INSPIRED BY EFFICIENCY CATALOG DRUM MOTOR DM 0080 DM 0113 Symbols Contents "Inspired by Efficiency" Smart handling of resources is mandatory for Interroll. Because we are convinced that efficiency is a
More informationUser manual Interroll Drum Motors S-series i-series E-series D-series
User manual Interroll Drum Motors S-series i-series E-series D-series Chapter-ID: Chapter-ID: Version User manual Chapter-ID: Manufacturer Interroll Trommelmotoren GmbH Opelstr. 3 41836 Hueckelhoven/Baal
More informationUser Manual Interroll Drum Motors S-series i-series E-series SN-series
User Manual Interroll Drum Motors S-series i-series E-series SN-series Chapter-ID: User Manual Chapter-ID: Version Chapter-ID: Manufacturer Interroll Trommelmotoren GmbH Opelstr. 3 41836 Hueckelhoven/Baal
More informationINSPIRED BY EFFICIENCY CATALOG DRUM MOTOR DM 0080
INSPIRED BY EFFICIENCY CATALOG DRUM MOTOR DM 0080 Symbols Contents "Inspired by Efficiency" Smart handling of resources is mandatory for Interroll. Because we are convinced that efficiency is a fundamental
More informationO p t i o n s. Interroll s focus is optimum customisation for your application when developing options
Overview O p t i o n s Interroll s focus is optimum customisation for your application when developing options for Interroll Drum Motors. This chapter includes options which are integral to the Interroll
More informationINSPIRED BY EFFICIENCY CATALOG DRUM MOTOR DM 0080
INSPIRED BY EFFICIENCY CATALOG DRUM MOTOR DM 0080 Symbols Contents "Inspired by Efficiency" Smart handling of resources is mandatory for Interroll. Because we are convinced that efficiency is a fundamental
More informationProduct overview. Interroll Drum Motors Energy-efficient drives for unit load handling
Product overview Interroll Drum Motors Energy-efficient drives for unit load handling Asynchronous S-Series i-series Drum Motors Frequency inverters, Options, Accessories 83% efficiency Synchronous D-Series
More informationINTER PLANT STANDARD STEEL INDUSTRY
INTER PLANT STANDARD STEEL INDUSTRY SAIL DESIGN PARAMETERS FOR SHUTTLE CONVEYOR Corresponding IS does not exist IPSS:2-03-019-11 Formerly: IPSS: 2-03-019-95 0. FOREWORD 0.1 This Interplant Standard has
More informationUser Manual Interroll Drum motor. i-series S-Series S/A-Series D-Series. Version 6.0 (07/2017) en Translation of original instruction manual
INSPIRED BY EFFICIENCY User Manual Interroll Drum motor i-series S-Series S/A-Series D-Series Manufacturer Interroll Trommelmotoren GmbH Opelstr. 3 41836 Hueckelhoven/Baal Germany Phone: +49 2433 44 610
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL and BEARINGS 303
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 40 203 PERFORMANCE CURVE 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING
More informationIt s All a Matter of TechNiQ. NiQ: Our latest generation of energy-saving motors.
It s All a Matter of TechNiQ. NiQ: Our latest generation of energy-saving motors. About ebm-papst. As a leader in technologies for ventilation and drive engineering, ebm-papst is in demand as an engineering
More informationDESKS FICHE TECHNIQUE AIRPORT \ CONVEYOR BELTS ASSIGNED TO CHECK-IN ZONE. The check-in stations comprise 3 or 4 conveyor belts :
FICHE TECHNIQUE AIRPORT \ CONVEYOR BELTS ASSIGNED TO CHECK-IN ZONE The check-in stations comprise 3 or 4 conveyor belts : T1 conveyor belt : Depositing weighing labelling; T2 conveyor belt : Baggage length
More informationROLLER DRIVE DRUM MOTOR
ROLLER DRIVE DRUM MOTOR INNOVATIVE IMPRESSES WITH THE GEARLESS VERSION ROLLER DRIVE MRI30/MRA50/MRI50 2 MTA SYSTEMS - MOTION TECHNOLOGY AUTOMATION PERFORMANCE DATA MRI30 The smallest roller drive with
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 40 203 PERFORMANCE CURVE 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300
More informationEASY CONVEYORS OVERVIEW
EASY CONVEYORS OVERVIEW TABLE TOP CONVEYOR SYSTEMS MAT TOP CONVEYOR SYSTEMS CONVEYOR COMPONENTS BELT CONVEYORS SYSTEMS ROLLER CONVEYOR SYSTEMS www.autoline.net.nz www.easy-conveyors.com Easy Conveyors
More informationFlygt 3057, 50Hz. Technical Specification
Flygt 3057, 50Hz Technical Specification Table of Contents Table of Contents C-pump...2 Product description...2 Motor rating and performance curves...4 D-pump...6 Product description...6 Motor rating and
More informationINSPIRED BY EFFICIENCY. User Manual Interroll Drum motor. DM series. Version 2.2 (07/2018) en Translation of original instruction manual
INSPIRED BY EFFICIENCY User Manual Interroll Drum motor DM series Manufacturer Interroll Trommelmotoren GmbH Opelstr. 3 41836 Hueckelhoven/Baal Germany Phone: +49 2433 44 610 www.interroll.com Contents
More information- SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS PERFORMANCE CURVE MULTIGO PERFORMANCE CURVE MULTIGO
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202-203 PERFORMANCE CURVE 40 203 PERFORMANCE CURVE 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300-301 QUANTITY FOR
More informationSection 5 Roller Chain Drive Components
8981 00 269 08/14 TSplus Assembly Conveyors -1 Roller Chain Components Section Roller Chain Components TSplus roller chain drives provide the largest payload carrying capacity of the three conveying media
More informationN-pump, Standard Motor
N-pump, Standard Motor N-pump, Standard Motor Product description Usage Installation type P, S, T, Z Installation type L A submersible pump for efficient pumping of clean water, surface water, and wastewater
More informationHYDRO SERIES 11K2-15K2 LIMITS TO USE
OPEN IMPELLER 5 Hz HYDRO SERIES 11K2 15K2 USE Submersible electric pumps suitable for the lifting of clear and dirty water. They are especially used in building yards and for pumping abrasive liquids.
More informationPallet Conveyor System
New modular pallet conveyor from The new modular pallet conveyor comprises of heavy duty chain conveyor, roller conveyor, chain transfer and turntable modules. The flexible pallet conveyor system is designed
More informationFlygt 3045, 50Hz. Technical Specification
Flygt 3045, 50Hz Technical Specification Table of Contents Table of Contents C-pump...2 Product description...2 Motor rating and performance curves...4 D-pump...6 Product description...6 Motor rating and
More information3363 en / e
3363 en - 03.2005 / e alternators 4 Pole range : 5-2700 kva General features and ratings ALTERNATORS Summary Page 1 - RATING DEFINITION... 3 2 - INSULATION CLASS AND TEMPERATURE RISE... 3 3 - DERATING...
More informationStraight running slat-band chains made of steel and stainless steel
LEAD BY IDEAS Straight running slat-band chains made of steel and stainless steel Type 812/815, dimensions, mass SPROCKET ISO N Plate S 815 - K 225 S 815 - K 263 S 815 - K 325 S 815 - K 400 S 815 - K 450
More information-L- Pressure bar
Sealing ring O -L- Pressure 0.95 +10 bar Material: Sealing ring O: Polyvinyl chloride Sealing ring O-M3-B: Polyamide Free of copper and PTFE For thread Temperature range Nominal tightening D1 D2 B1 Part
More informationEngineered to Keep Your Business Running. Product Guide
Engineered to Keep Your Business Running Product Guide Contents The Drum Motor... 5 Design Benefits... 6 Standard Features... 7-8 Range of Available Standard Drum Motors... 9 Optional Features... 10-12
More informationERS Logic System Roller Conveyors. ERS Logic System Belt Conveyors. EBS System Belt Conveyors. ETS System Flat Top Conveyors
CONVEYOR MODULES & COMPONENTS ERS Logic System Roller Conveyors ERS Logic System Belt Conveyors EBS System Belt Conveyors ETS System Flat Top Conveyors EMBS System Flat Top Conveyors EMCS System Flat Top
More informationModular Roller Conveyor System
Building blocks to satisfy your needs Modular Roller Conveyor For packages as small as 250mm in length. Handles packages up to 30kg (or 50kg Eurototes). Speeds up to 114m/min. Conveyor Widths from 300mm
More informationLSA Rating Table Low Voltage Alternators - 4 pole
LSA Rating Table Low Voltage Alternators - 10 to 3300 kva - 50 Hz / 12.5 to 3900 kva - 60 Hz General features and ratings Summary 1 - RATING DEFINITION... 3 2 - INSULATION CLASS AND TEMPERATURE RISE...
More informationSubmersible Borehole Pump. Ixo N. Type Series Booklet
Submersible Borehole Pump Ixo N Type Series Booklet Legal information/copyright Type Series Booklet Ixo N All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
More informationINSPIRED BY EFFICIENCY. User Manual Interroll Drum motor. DM series. Version 1.1 (01/2017) en-us Translation of original instruction manual
INSPIRED BY EFFICIENCY User Manual Interroll Drum motor DM series Version 1.1 (01/2017) en-us Manufacturer Interroll Trommelmotoren GmbH Opelstr. 3 41836 Hueckelhoven/Baal Germany Phone: +49 2433 44 610
More informationBEST ONE SUBMERSIBLE SUMP PUMPS EPA. Page Features & Applications 100 Exploded View 101 Pump & Motor Specifications 102 Selection Chart / Type key 103
CONTENTS -SPECIFICATIONS Page Features & Applications 100 Exploded View 101 Pump & Motor Specifications 102 Selection Chart / Type key 103 -PERFORMANCE CURVES Performance Curve Best One 200 Performance
More informationFlygt 3057, 50Hz. Technical Specification
Flygt 3057, 50Hz Technical Specification Table of Contents Table of Contents C-pump...2 Product description...2 Motor rating and performance curves...4 D-pump...6 Product description...6 Motor rating
More information- SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 202 PERFORMANCE CURVE OPTIMA 203
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 203 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE
More informationPage - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPEFICATIONS 203 PERFORMANCE CHART BEST ONE 204 PERFORMANCE CHART BEST ONE VOX 205
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPEFICATIONS 203 PERFORMANCE CHART 204 PERFORMANCE CHART VOX 205 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW
More informationPage - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPEFICATIONS 203 PERFORMANCE CHART BEST ONE 204 PERFORMANCE CHART BEST ONE VOX 205
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPEFICATIONS 203 PERFORMANCE CHART 204 PERFORMANCE CHART VOX 205 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW
More informationMINOR. Electrical submersible drainage pump. Tel Fax Hz. No: PD603-EN. Revision
o: PD63-E Revision 27.12 z MIOR 793 mm Ø 286 mm Ø1 mm Weight: 2 kg P (kw) 6 (m) 4 3 2 1 4 3 3 2 2 1 1 1 1 2 2 3 3 ISO 996/A : ormal pressure : igh pressure Insulation class (IEC 8) Rated output Max. power
More informationDWC. ENCLOSED IMPELLER CENTRIFUGAL ELECTRIC PUMPS in AISI 304. Japanese Technology since Commercial
Enclosed impeller centrifugal electric pumps stainless steel. APPLICATIONS Cooling, air conditioning and heating systems Chiller Washing systems Industrial liquids DWCN DWCV PERFORMANCE RANGE (according
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 302
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 203 PERFORMANCE CURVE VOX 204 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW
More informationFlygt 3171, 50Hz. Technical Specification
Flygt 3171, 50Hz Technical Specification Table of Contents Table of Contents F-pump, Standard Motor...2 Product description...2 Motor rating and performance curves...5 F-pump, Premium Efficiency Motor
More informationDWC. ENCLOSED IMPELLER CENTRIFUGAL ELECTRIC PUMPS in AISI 304. Japanese Technology since Commercial
Enclosed impeller centrifugal electric pumps stainless steel. APPLICATIONS Cooling, air conditioning and heating systems Chiller Washing systems Industrial liquids DWCN DWCV PERFORMANCE RANGE (according
More informationGRUNDFOS WASTEWATER. Business with an attitude
Being responsible is our foundation Thinking ahead makes it possible Innovation is the essence GRUNDFS WASTEWATER Business with an attitude Knowledge The sharing of knowledge, experience and expertise
More informationOVERSHOT GATE TECHNICAL DATA SHEET
FRESNO OVERSHOT GATE TECHNICAL DATA SHEET Applications Fresno Overshot Gates effectively control upstream and downstream levels of canals. Improved flow control is achieved through the use of this fully
More informationElectrically insulated bearings from SKF
Electrically insulated bearings from SKF Virtually eliminate the dama The problem of stray electric current bearing damage When a stray current in an electric motor uses a bearing as its path to ground,
More informationVertical Offset Conveyors
VO-Series VO-SeriesBrochure_modified:VO-SeriesBrochure_modified.qxd 2/5/2009 11:20 AM Page 21 VO-Series Vertical Offset Conveyors your Material Handling Specialist VO-SeriesBrochure_modified:VO-SeriesBrochure_modified.qxd
More informationOPTIBELT WALK B.V. FACTS BROCHURE THE SPECIALISTS FOR GEARS AND SPECIAL DRIVES
OPTIBELT WALK B.V. FACTS BROCHURE THE SPECIALISTS FOR GEARS AND SPECIAL DRIVES Page 2 ABOUT OPTIBELT WALK WHO WE ARE We are specialists for sophisticated metalworking of small to medium volumes. Our company
More informationAPPLICATIONS. This circulator is suitable for drinking water only. Hot water accelerated circulation in distribution loops.
OPERATING LIMITS Flow rates up to : m /h Heads up to :, m Max. operating pressure : bar Max. loop temperature : +8 C Max. circulator temperature: C Max. ambient temperature : + C Water hardness (TH) :
More informationFundamentals p. 1 Mechanical Engineering Design in Broad Perspective p. 3 An Overview of the Subject p. 3 Safety Considerations p.
Fundamentals p. 1 Mechanical Engineering Design in Broad Perspective p. 3 An Overview of the Subject p. 3 Safety Considerations p. 5 Ecological Considerations p. 9 Societal Considerations p. 11 Overall
More informationSeries description Wilo-Drain STS 40
Series description Wilo-Drain STS 40 Series description Wilo-Drain STS 40 Subject to change 09/2008 WILO SE Wilo Catalogue C2 - - Sewage pumps from DN 32 to DN 800 Materials Pump housing: EN-GJL-250 Pedestal:
More informationPump Specifications 450 Series 1/2 hp Submersible Sump Pump
Pump Specifications 450 Series 1/2 hp Submersible Sump Pump 450_P1 R1/27/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. 450-Series Dimensional
More informationOrder Information. Technical Data. Dimensions. Roller Conveyors Key Elements RM 6007 Lift
Interroll Lift RM 6007 Technical Data General technical data Max. load capacity 150 kg Stroke velocity ~0.20 m/s Ambient temperature -5 to +40 C Max. stroke height 1,000 mm Start-up position 2 Lifting
More informationContents. Shaft mounted helical gear units F Type of construction 60 Selection table - Gear units 62 Selection table - Geared motors 74 Dimensions 88
Contents Introduction Type designation 2 Product description 3 Drive selection 6 Mounting Position 8 Lubrication 9 Free input shaft -W 11 Motor adapter -M IEC 12 Motor adapter -M NEMA 13 Motor adapter
More informationHEAVY DUTY BEVEL GEARBOX MODEL SB-V
FEATURES AND BENEFITS The SB-V series is suitable for use with Globe, Sluice and Knife Gate type valves and any other type requiring linear motion for thrust and torque applications Unique Top Entry replaceable
More informationTest Chain Instruction Manual
Test Chain Instruction Manual Instruction Manual PL-CMS001 October 1998 Rev 1.0 T hank-you for purchasing Milltronics' products. We are committed to satisfying our customers' needs with innovative equipment
More information...our linkages, your solution. Rod Ends
...our linkages, your solution ov-rod-ends-divider - Updated - 12-01-2017 Technical Information Introduction All of our rod ends incorporate either a plain spherical bearing, ball bearing, or roller bearing.
More informationOver / Under Conveyor
Compact, reliable and economic solutions for Transferring Accumulating Positioning Infeed and exit conveyors The compact and modular conveying system for transferring and accumulating parts with or without
More informationUser Manual Interroll Drum Motor C Series S-SMP Series S Series (DC Versions)
User Manual Interroll Drum Motor C Series S-SMP Series S Series (DC Versions) Version 1.3 (09/2016) en-us Manufacturer Interroll Joki A/S Hammerholmen 2-6 2650 Hvidovre Denmark Telephone: +45 36 88 33
More informationLoad cell Pendeo Process and mounting kits
Load cell Pendeo Process and mounting kits Digital weighing technology for maximum transparency and precision The digital compression load cells in the Pendeo Process series are specially designed for
More information3200 SERIES COMMON DRIVE PACKAGE Special Capabilities Specification Sheet
975 Cottonwood Ave., PO Box 20, Hartland, Wisconsin 53029-0020, USA www.dorner.com info@dorner.com COMMON DRIVE CONVEYOR SETUP Up to (4) conveyors can be coupled together and driven from a single gearmotor.
More informationPrecision Lead Screws
Precision Lead Screws ov-precision_lead_screws_divider - Updated - 18-09-2017 163 Precision Lead Screws Technical Information Precision lead screws ov-precision_lead_screws_technical_info - Updated - 18-09-2017
More informationMechanical Ratings. Description Plastic (800EP/ES) Metal (800EM/EB) 1/2 cycle sine wave for 11 ms and no damage at 100 G
Specifications ➊ Front of Panel (Operators) Mechanical Ratings Description Plastic (8EP/ES) Metal (8EM/EB) Vibration (assembled to panel) 1 2 Hz, 1.52 mm max./1 G max. Shock and no damage at 1 G Degree
More informationDTS-HC High-Current Connectors
ROBUST DTS-HC High-Current Connectors Signal and power contacts in same housing Up to four 150 A or one 300 A high-current contacts Threaded coupling with self-locking mechanism for anti-vibration 100%
More informationthe high capacity conveyor for improved unit flow
the high capacity conveyor for improved unit flow The heavy duty conveyor, designed for high capacity transport both vertically and horizontally Jonge Poerink Conveyors Modulary design fits easily into
More informationPage - SPECIFICATIONS SPECIFICATION PUMP 200 SPECIFICATION MOTOR 201 SELCTION CHART TYPE KEY-TYPE PUMP 202 PERFORMANCE CURVE SB
SUBMERSIBLE MULTISTAGE PUMPS SB 3 CONTENENTS 50 Hz Page - SPECIFICATIONS SPECIFICATION PUMP 200 SPECIFICATION MOTOR 201 SELCTION CHART TYPE KEY-TYPE PUMP 202 PERFORMANCE CURVE SB 3 15-23-30-45 203 - CONSTRUCTIONS
More information... self-lubricating and cost-effective...
xiros...... self-lubricating and cost-effective... $ $ New online service life calculator. Increased service life as a result of continuous development. www.igus.com/xiroslife plastics for longer life
More informationINTELLIGENT DRIVESYSTEMS, WORLDWIDE SERVICES DRIVE SOLUTIONS FOR THE BEVERAGE INDUSTRY
INTELLIGENT DRIVESYSTEMS, WORLDWIDE SERVICES EN DRIVE SOLUTIONS FOR THE BEVERAGE INDUSTRY NORD DRIVESYSTEMS Intelligent Drivesystems, Worldwide Services NORD DRIVE SOLUTIONS FOR THE BEVERAGE INDUSTRY 2
More informationMarine motors. 10/2 Orientation 10/2 Overview 10/3 Benefits 10/3 Application 10/3 Technical specifications 10/5 More information
/2 Orientation /2 Overview /3 Benefits /3 Application /3 Technical specifications /5 More information /6 Type approved standard motors up to frame size 315 L /6 Overview /7 Type approved explosion-proof
More informationI. Selection Procedure for DOUBLE PLUS, Outboard Roller and Top Roller Chain
I. Selection Procedure for DOUBLE PLUS, Outboard Roller and Top Roller 1) Confirmation of operating conditions for free flow conveyor The following information is needed in order to select an appropriate
More informationConveyor systems up to 500 kg. 500 kg.
500 kg Index 1 TOTH BELT CONVEYOR SYSTEMS 3 1.1 TOOTH BELT CONVEYOR 3 1.2 TOOTH BELT RIGHT ANGEL TRANSFER 4 1.3 P & D STATIONS 5 2 ROLLER CAGE CONVEYOR SYSTEMS 6 2.1 INFEED/ OUTFEED CONVEYOR 6 2.2 CHAIN
More information660 Volts 630 & 800AMP
Ergon Energy Corporation Limited Technical Specification for Switch- Disconnectors and Fuse-Switch- Disconnectors 660 Volts 630 & 800AMP ETS-06-02-01 Check this is the latest Process Zone version before
More informationIron Check Valves & Y-Strainers Illustrated Index
Iron Check Valves & Y-Strainers Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Lead
More informationLOAD BEARING ROLLER ASSEMBLIES Engineering Data Installation Notes
Installation Notes INSTALLING STUD TYPE LOAD BEARING ROLLER ASSEMBLIES Mounting holes should be machined to the nominal stud size within +.001/-.000 (+.025mm / -.000mm) tolerance. When properly aligned,
More informationPresented By. NicolScales.com Contact Us
Presented By Dallas Ft Worth ustin Houston NicolScales.com 800.225.8181 Contact Us Nicol Scales & Measurement is an ISO ccredited Calibration Company that has provided calibration, repair and sales of
More informationSMA SERIES COAXIAL CONNECTORS
General R Reference Standards MIL-PRF-3912 MIL-DTL-83517 MIL-STD-348 (Interface) IEC 6169-15 CECC 12211 Materials Bodies and nuts Contacts Insulators Gaskets Crimp ferrules Non-magnetic stainless steel
More informationSection SECTIONAL INSULATED STEEL DOORS
1 GENERAL 1.1 GENERAL REQUIREMENTS General Conditions and Division 01 apply to this section. 1.2 RELATED WORK Section 05500: Miscellaneous Metal Fabrication Section 07900: Joint Sealers Section 09900:
More informationFire Fighting Application
sss High Pressure Triplex Plunger Pumps For Fire Fighting Application 2016 About Us sssss About Company PressureJet Systems Pvt. Ltd. was established in 1996 in Ahmedabad, India. PressureJet (an ISO 9001:2008
More informationAll product images are indicative only General characteristics
submersible pumps PRODU AALOUE 04 Multi-channel open impeller All product images are indicative only eneral characteristics Multi-channel open impeller motor power poles discharge free max flow rate max
More informationMotorized Pulleys Solve Materials Handling Problems in North America
HANDLING Volume 21 Number 2 March/April 2001 Motorized Pulleys Solve Materials Handling Problems in North America M. Gawinski, USA* 1. Introduction Motorized pulleys were first introduced to the North
More informationEquipment Information
QCM Equipment Information INDEX: DESCRIPTION AND KEY FEATURES LAYOUT NOMINAL TECHNICAL DATA CONFIGURATION Sealed Air Ltd. Clifton House, 1 Marston Road St. Neots GB-Cambridgeshire PE19 2HN United Kingdom
More informationFundamentals of Machine Component Design
FOURTH E D I T I O N Fundamentals of Machine Component Design ROBERT C. JUVINALL Professor of Mechanical Engineering University of Michigan KURT M. MARSHEK Professor of Mechanical Engineering University
More informationINTERROLL CORPORATE ART
en-us MAR/2008 DEC/2008 ROLLERDRIVES & & DRIVECONTROLS en-us EN DEC/2008 MAR/2008 OLL.C O M RW W W.I NTE R R O L L E R - D R I V E S A N D D R I V E C O N T R O L INTERROLL CORPORATE ART Contents Interroll
More informationSMP. Single-channel closed impeller. submersible pumps PRODUCT CATALOGUE General characteristics
submersible pumps PRODU AALOGUE 04 Single-channel closed impeller All product images are indicative only General characteristics Single-channel closed impeller motor power,0 kw 6,4 kw poles / 4 / 6 discharge
More informationSubmersible Supply Pump Packages
Submersible Supply Pump Packages ccessory for qua-ontrol 600, 750, 1100S, Eco, 2100S, Eco, -HT Break / Header Tank Systems versions for qua ontrol 600, 750, 1100S, Eco, HT Break / Header Tank Systems,
More informationSMP. Single-channel closed impeller. motralec. electrical submersible pumps. General characteristics
motralec 4 rue Lavoisier. ZA Lavoisier. 95 HERBLAY EDEX el. : 0.9.97.65.0 / Fax. : 0.9.97.68.48 Demande de prix / e-mail : service-commercial@motralec.com www.motralec.com Single-channel closed impeller
More informationD A T A - S H E E T PROJECT NO.: DESIGNATION:
Lenenweg 30a D - 47918 Tönisvorst Tel.: (++49)(0)2151 792550 Fax: (++49)(0)2151 792555 Internet: www.plast-resale.com e-mail: DE@plast-consult.com PROJECTMANAGEMENT ENGINEERING SERVICE PROJECT NO.: 14-2071-00
More informationSUBMERSIBLE ELECTRIC PUMPS
SUBMERSIBLE ELECTRIC PUMPS SUBMERSIBLE PUMPS Gruppo Aturia started developing the Submersible Pump for pumping water in agriculture and for distribution of water in the municipalities. For these applications
More informationID-Series Incline/Decline Conveyors
ID-Series Incline/Decline Conveyors your Material Handling Specialist ID-SeriesBrochure_modified:ID Series Brochure.qxd 2/5/2009 11:27 AM Page 2 S pa n T ec h Yo u r Ma t e ri a l H a nd li n g S pe c
More informationAutomatic Strapping. PS-Range VR-Range OR-Range Side Sealing Strapping Head Special Solutions. PS-range VR-range OR-range
Automatic Strapping PS-Range VR-Range OR-Range Side Sealing Strapping Head Special Solutions PS-range VR-range OR-range VR-Range The VR4 model is a strapping machine that has been developed to create fully
More informationRegionale. Automatic Labeling Machine. Wine Industry. CDA USA Inc, 4310 Eubank Road, VA USA
Regionale Automatic Labeling Machine Wine Industry Regionale Automatic Labeling Machine General description The Régionale enables up to 4 labels applications and the crimping of metallic or PVC capsules.
More informationSUBMERSIBLE ELECTRIC PUMPS
SUBMERSIBLE ELECTRIC PUMPS SUBMERSIBLE PUMPS Gruppo Aturia started developing the Submersible Pump for pumping water in agriculture and for distribution of water in the municipalities. For these applications
More informationLow Voltage alternators - 4 pole LSA 42.3
Low Voltage alternators - 4 pole LSA 42.3 2 to 60 kva - 0 Hz / 31. to 7 kva - 60 Hz Electrical and mechanical data 42en - 12.02 / c SPECIALLY ADAPTED TO APPLICATIONS The LSA 42.3 alternator is designed
More informationHybrid bearings SKF hybrid deep groove ball bearings Sealed and greased-for-life bearings Open design bearings...
Hybrid bearings Hybrid bearings... 896 SKF hybrid deep groove ball bearings... 897 Sealed and greased-for-life bearings... 897 Open design bearings... 898 Other SKF hybrid bearings... 898 Hybrid high-precision
More informationSAMSON LIQUID RING VACUUM PUMPS. 33 mbar absolute to 1013 mbar absolute. DATASHEET ME-SERIES DOC1005A
TRUCKS FOOD OFFSHORE FISH PROCESS DATASHEET ME-SERIES DOC1005A ME-SERIES Range: 33 mbar absolute to 1013 mbar absolute. Capacity: From 50 m3/h to 165 m3/h Index Page About SAMSON PUMPS...4 Materials...5
More informationGROUP. special. Mechanical Transmissions on Demand. ingranaggi
Mechanical Transmissions on Demand GROUP special ingranaggi A solid and flexible company GROUP special ingranaggi MECHANICAL TRANSMISSIONS ON DEMAND Since 1999 we are the recognised leaders in the manufacture
More information