Chapter 8: External solid plastering
|
|
- Rudolf Hardy
- 6 years ago
- Views:
Transcription
1 Candidate name: Candidate number: Date: Chapter 8: External solid plastering Circle the correct answers. 1 Which of the following is required for preparing new blockwork for a plainfloat finish? a Coating blockwork with PVA b Damping down of blockwork c Hacking with a lath hammer d Raking out of joints to blockwork 2 Which of the following is a latex-based adhesive used to form a key for external render? a PVA b ERA c SBR d EML 3 In traditional external cement-based renders in which coat is the waterproofer added? a Dubbing out coat b Floating coat c Top coat d Render coat 4 The scratch/render coat should be applied at: a 6 to 8 mm thick b 9 to 12 mm thick c 12 to 14 mm thick d 13 to 16 mm thick 5 What is the purpose of a bell-cast bead? a To give a decorative finish b Protect angles around the building c Direct rainwater from the face of the building d To hide poor-quality finish Plastering NVQ and Technical Certificate Level 2 Tutor Resource Disk 1 of 1
2 6 If a strong cement-based external render is applied on top of a weaker mix it will: a Make the render become lose b Improve the wearing properties of the finish c Help to achieve a better quality finish d Improve the waterproofing of the finish 7 The correct mix proportion for a render coat for external rendering is: a 2 to 1 plus waterproofer b 4 to 1 no waterproofer c 2 to 1 no waterproofer d 4 to 1 plus waterproofer 8 The best type of sand for external rendering to improve its weather proofing is: a Medium sharp b A good soft builder s sand c As sharp as can be spread easily d A coarse builder s sand 9 When applying the top coat for an external rendering, the type of suction you may find is: a Medium, low suction b High suction c No suction d Very high suction 10 The finishing coat for external render will require: a Box screeds b Broad screeds c Plumb and dot d No screeds 11 What is the purpose of an expansion bead? a To form panels on the wall b To make a break between different materials c To allow for movement in the background d To form a feature at the bottom of the wall 12 How should external cement work be cured? a Throw buckets of water onto the render straight after completion b Hose down cement finish two weeks after finishing c A light hosing 24 hours after finishing d Gently tip water down render face straight after finishing Plastering NVQ and Technical Certificate Level 2 Tutor Resource Disk 2 of 2
3 13 What thickness of render should be applied for the finishing coat? a 4 to 6 mm b 7 to 9 mm c 10 to 12 mm d 13 to 15 mm 14 Which of the following is the most common fault found in external render finishes? a Pattern staining b Surface crazing c Colour changes d Efflorescence staining 15 Which of the following methods is used for fixing external rendering beads? a Plaster dabs b Neat cement c Rendering mix d Small headed nails Plastering NVQ and Technical Certificate Level 2 Tutor Resource Disk 3 of 3
4 Chapter 8: External solid plastering Answers 1 Which of the following is required for preparing new blockwork for a plainfloat finish? a Coating blockwork with PVA b Damping down of blockwork c Hacking with a lath hammer d Raking out of joints to blockwork 2 Which of the following is a latex-based adhesive used to form a key for external render? a PVA b ERA c SBR d EML 3 In traditional external cement-based renders in which coat is the waterproofer added? a Dubbing out coat b Floating coat c Top coat d Render coat 4 The scratch/render coat should be applied at: a 6 to 8 mm thick b 9 to 12 mm thick c 12 to 14 mm thick d 13 to 16 mm thick 5 What is the purpose of a bell-cast bead? a To give a decorative finish b Protect angles around the building c Direct rainwater from the face of the building d To hide poor-quality finish Plastering NVQ and Technical Certificate Level 2 Tutor Resource Disk 4 of 4
5 6 If a strong cement-based external render is applied on top of a weaker mix it will: a Make the render become lose b Improve the wearing properties of the finish c Help to achieve a better quality finish d Improve the waterproofing of the finish 7 The correct mix proportion for a render coat for external rendering is: a 2 to 1 plus waterproofer b 4 to 1 no waterproofer c 2 to 1 no waterproofer d 4 to 1 plus waterproofer 8 The best type of sand for external rendering to improve its weather proofing is: a Medium sharp b A good soft builder s sand c As sharp as can be spread easily d A coarse builder s sand 9 When applying the top coat for an external rendering, the type of suction you may find is: a Medium, low suction b High suction c No suction d Very high suction 10 The finishing coat for external render will require: a Box screeds b Broad screeds c Plumb and dot d No screeds 11 What is the purpose of an expansion bead? a To form panels on the wall b To make a break between different materials c To allow for movement in the background d To form a feature at the bottom of the wall 12 How should external cement work be cured? a Throw buckets of water onto the render straight after completion b Hose down cement finish two weeks after finishing c A light hosing 24 hours after finishing d Gently tip water down render face straight after finishing Plastering NVQ and Technical Certificate Level 2 Tutor Resource Disk 5 of 5
6 13 What thickness of render should be applied for the finishing coat? a 4 to 6 mm b 7 to 9 mm c 10 to 12 mm d 13 to 15 mm 14 Which of the following is the most common fault found in external render finishes? a Pattern staining b Surface crazing c Colour changes d Efflorescence staining 15 Which of the following methods is used for fixing external rendering beads? a Plaster dabs b Neat cement c Rendering mix d Small headed nails Plastering NVQ and Technical Certificate Level 2 Tutor Resource Disk 6 of 6
External solid plastering: overview
External solid plastering: overview Render gives a weatherproof surface that protects the building and provides a decorative finish. Traditional render is applied by hand; modern render can also be applied
More informationPPC Cement TUTORIAL. how to screed a floor
PPC Cement TUTORIAL how to screed a floor Pre-build: TOOLs & Materials ITEM Quantity Check. Builders bucket. Wheelbarrow 3. Shovel 4. Builder s line 5. 50mm steel pegs 6. Rigid timber forms 7. Flexible
More informationBuilding Construction 14. Dr Nabil El-Sawalhi Associate professor Engineering Projects Management
Building Construction 14 Dr Nabil El-Sawalhi Associate professor Engineering Projects Management Plaster Plaster is a wet mixed material applied to internal walls as a finish to fill in any irregularities
More information/501 Level 3 Plastering (Solid) Version 1.0 November Sample Marking Scheme
7908-001/501 Level 3 Plastering (Solid) Version 1.0 November 2016 Sample Marking Scheme The correct responses to the multiple questions are in BOLD. 1 What must be checked by a building control officer
More informationCHAPTER 10: Finishes CONTENTS 10.1 PLASTERWORK 10.2 SECOND AND THIRD FIX FINISHES. Chapter 10
CONTENTS 10.1 PLASTERWORK 10.2 SECOND AND THIRD FIX FINISHES 283 Chapter 10 FUNCTIONAL REQUIREMENTS FUNCTIONAL REQUIREMENTS 10.1 PLASTERWORK Workmanship i. All workmanship must be within the tolerances
More informationCHAPTER 10: Finishes CONTENTS 10.1 PLASTERWORK ND AND 3 RD FIX FINISHES
CONTENTS 10.1 PLASTERWORK 10.2 2 ND AND 3 RD FIX FINISHES FUNCTIONAL REQUIREMENT 10.1 Plasterwork Workmanship Design Technical Manual TS-011-09-010412 i. All workmanship must be within defined tolerances
More informationARTEX AND PLASTER. 2 - Choosing the right product
ARTEX AND PLASTER Proper plastering is not easy. But DIY plasters are designed with ease of use in mind, and Artex TM is no more difficult to apply than thick paint. It is best to wear gloves when mixing
More informationPlaster systems. Plaster systems.
Plaster systems Plaster systems Gyproc plasters have been formulated to suit a wide variety of background types including concrete, brick, blockwork, sand / cement, Gyproc Plasterboards and expanded metal
More informationMethod Statement. For RSA Cement Renders Over Masonry Substrates
Method Statement RSA Masonry Renders, Traditional Render and EP Render are all suitable for application over correctly prepared clay bricks and concrete blocks PREPARATION Cleaning:- Ensure all surfaces
More informationTECHNICAL INFORMATION LIME SAND MORTARS
TECHNICAL DATA SHEET LIME SAND MORTARS Ver August 2016 TECHNICAL INFORMATION LIME SAND MORTARS Product Data Sheet No. 120/01 INTRODUCTION Tarmac Lime Sand Mortars are factory produced lime:sand mortars
More informationNEWTON 803 NEWTONITE JOHN NEWTON & COMPANY LIMITED (EST. 1848) DATA SHEET. Damp-proofing Membrane & Plaster Base PRODUCT CODE - M16, M21 & M22
Cl/SfB (21.9) Ln6 (L34) NEWTON 803 NEWTONITE Rev 5.0-25 January 2011 INTRODUCTION Newton 803 Newtonite is a composite damp-proofing membrane comprising of high density polypropylene membrane with a rot-proof
More informationNEWTON 805 NEWLATH Damp-proofing Membrane & Plaster Base
Cl/SfB (21.9) Ln6 (L34) NEWTON 805 NEWLATH Rev 4.2-29 November 2012 INTRODUCTION Newton 805 Newlath is a composite damp-proofing membrane comprising of high density polypropylene membrane with a rot-proof
More informationSSS003: Substrate Specification Sheet 3 - Brick, Block and Concrete
SSS003: Substrate Specification Sheet 3 - Brick, Block and Concrete Page 1 of 6 Document: 70.5 Collection: 116: Substrate Specification Sheets (SSS) Modified: 3/01/017 14:56 Created: 7/05/016 17:0 Armourcoat
More informationLevel 1 Certificate in Basic Construction Skills - Plastering ( )
Level 1 Certificate in Basic Construction Skills - Plastering (6217-04) Qualification handbook www.cityandguilds.com June 2005 Version 1.1 (February 2014) About City & Guilds City & Guilds is the UK s
More informationModule 11: Plastered walls
Module 11: Plastered walls Module Objectives By the end of this session, participants will understand: 1. The requirements for good plastering. 2. Additives used in plaster. 3. How to key the substrate
More informationInstallation Instructions Tuscan Field Applied Limestone Finish
Installation Instructions Tuscan Field Applied Limestone Finish TS-107 Recommended Tools for Installation of Tuscan StoneWorx Finishes Variable Speed Drill capable of producing 1000 RPM s MX1 Mixing Paddle
More information18mm T&G Engineered Oak Fitting Guide & Warranty Information
Fitting Guide & Warranty Information Fitting Guide Pre Installation Acclimatising your new timba floor Your timba 18mm engineered flooring does not require a period of acclimatisation however warranty
More informationHemp Mortars St Astier Limes and Mortars telephone:
Hemp Mortars St Astier Limes and Mortars telephone: 0800 783 9014 HEMP MORTARS using St. Astier Natural Limes Hemp is a natural material suitable for making light weight insulating mortars. Its density
More informationLevel 1 Certificate in Basic Construction Skills. Qualification Specification
Qualification Specification ProQual 2011 Contents Page Introduction 3 Qualification profile 4 Qualification structure 5 Centre requirements 7 Support for candidates 7 Assessment 8 Internal quality assurance
More informationSILASEC DESCRIPTION FEATURES AND BENEFITS SURFACE PREPARATION
SILASEC WP0001 REVISED: JANUARY 2002 DESCRIPTION Bondall Silasec is a concentrated liquid waterproofing compound designed to be used with Portland type A or type GP cements to form a permanent waterproof
More informationNoMorePly The first tile backing system with a lifetime guarantee
Installation Guide NoMorePly.net The first tile backing system with a lifetime guarantee QUICK & EASY THIN PROFILE STRONGER BUILD WATER RESISTANT LIFETIME GUARANTEE KG KG It s quick and easy, and we re
More informationSECTION Specification for Building Limes Specification For Building Sands from Natural Sources Methods of Tests for Paints.
SECTION 09200 PART 1 - GENERAL 1.01 DESCRIPTION A. Extent of Work: The extent of lath and plaster work is shown on the drawings and in schedules and includes interior and exterior plaster work, and fibreglass
More informationSt. Astier NHL Plasters
St. Astier NHL Plasters General Information, Sand For Plasters, Background Preparation, Two Coat Work, Three Coat Work, Protection, Good Working Practice, Plaster Diagnostics, Some Recommended Mixes General
More informationCONSTRUCTION SMARTSCREEN
6704 Level 1 Construction Trade Occupations - 325 + VAT (SS6704-LV1 ) Unit 102 - Construction Trade Occupations - Painting and Decorating Unit 103 - Construction Trade Occupations - Plastering Unit 104
More informationBRICKWORK 3.5 BRICKWORK 1 GENERAL
BRICKWORK 1 GENERAL 1.1 INSPECTION Notice Give sufficient notice so that inspection may be made of the following: - Set out of brickwork to lintels, arches and other architectural features. - Damp-proof
More informationProduct Data Sheet KF.46 Iss AQUATECH
DESCRIPTION AQUATECH Kingfisher Aquatech is a premium cement based tanking powder with active hydrophobic ingredients that react with water and free lime to form pore blocking crystals. Mixed with water
More informationTECHNICAL DATA SHEET AUS-BOND INDUSTRIAL LATEX ADMIX
Description: Aus-Bond Industrial Latex Admix is a specially formulated latex admix for use in sand/cement based mortars for extreme conditions such as swimming pools, facades, rapid transit stations and
More informationLASER Progression (QCF) UNIT CONTENT Construction and Trades
LASER Progression (QCF) UNIT CONTENT Construction and Trades This document is to be used in conjunction with the Qualification Specification and Unit Lists for this suite of qualifications, provided by
More informationMethod Statement. For RSA Coating Systems Over AAC Lightweight Blocks N.B. Please refer to separate Application Guidelines for AAC Lightweight Panels
Method Statement For RSA Coating Systems Over AAC Lightweight Blocks RSA strongly recommend the use of our full render, texture and protective coating systems over AAC lightweight blocks. We DO NOT recommend
More informationMethod Statement. For RSA Coating Systems Over AAC Lightweight Blocks N.B. Please refer to separate Application Guidelines for AAC Lightweight Panels
Method Statement For RSA Coating Systems Over AAC Lightweight Blocks RSA strongly recommend the use of our full render, texture and protective coating systems over AAC lightweight blocks. We DO NOT recommend
More informationLevel 1 Certificate in Basic Construction Skills
Qualification Specification ProQual 2011 ProQual, May 2016 1 Contents Page Introduction 3 The Qualifications and Credit Framework (QCF) 3 Qualification profile 4 Rules of combination 5 Credit transfer
More informationMultipurpose latex additive for mortar and cementitious adhesive
SGBPDC-12-081 Multipurpose latex additive for mortar and cementitious adhesive USES For the preparation of high performance mortar, screeds and renders. Typical application Screeds and levelling compounds
More informationIRISH BOARD. WEBER MONOCOUCHE RENDERING SYSTEM Enduit de surface Oberflachenbeschichtung. CERTIFICATE No. 03/0180 BUILDING PRODUCT CERTIFICATION
IRISH AGRÉMENT BOARD BUILDING PRODUCT CERTIFICATION CERTIFICATE No. 03/0180 Cl/SfB (41) Pq4 weber sbd, Dickens House, Enterprise Road Flitwick, Bedford MK45 5BY, UK. Tel: 08703 330070 Fax: 01525 718988
More informationECO OUTDOOR INSTALLATION TIPS WALLING FREE FORM MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T ECOOUTDOOR.COM.AU
ECO OUTDOOR INSTALLATION TIPS WALLING FREE FORM MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T. 1300 13 14 13 ECOOUTDOOR.COM.AU Installations tips Please note these tips are guides only and should be used
More informationaquapanel InstallatIon GuIde
Installation Guide AQUAPANEL BEFORE YOU START It s a good idea to stand the AQUAPANEL sheets in the area for 2 days prior to cutting and installing, to allow the sheets to breathe and reach moisture equilibrium.
More informationLevel 2 Technical Certificate in Plastering
Level 2 Technical Certificate in Plastering 7908-20 March 2016 Version 1.0 Qualification Handbook Contents Contents 2 1 Introduction 3 2 Assessment 6 3 Units 7 Unit 201 Principles of construction 8 Unit
More informationECO OUTDOOR INSTALLATION TIPS WALLING RANDOM ASHLAR MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T ECOOUTDOOR.COM.AU
ECO OUTDOOR INSTALLATION TIPS WALLING RANDOM ASHLAR MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T. 1300 13 14 13 ECOOUTDOOR.COM.AU Installation Tips Please note these tips are guides only and should be used
More informationPlastering. Holiday Inn - Sultanate of Oman
1 208 Holiday Inn - Sultanate of Oman Gyproc GypFine Plasters provide the ultimate skimming solutions for today s high-end finish. They are formulated to suit a wide variety of backgrounds including plasterboard,
More informationECO OUTDOOR INSTALLATION TIPS WALLING DRY STONE MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T ECOOUTDOOR.COM.AU
ECO OUTDOOR INSTALLATION TIPS WALLING DRY STONE MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T. 1300 13 14 13 ECOOUTDOOR.COM.AU Installations Tips Please note these tips are guides only and should be used
More informationINFORM PLAIN LIME PLASTERING
INFORM PLAIN LIME PLASTERING Fig. 1 Slaking quicklime to produce lime putty. PLAIN LIME PLASTER Plaster has a long history of use as a finishing material for internal walls and celings in Scotland. The
More informationTWISTFIX CHEMICAL DAMP-PROOFING SYSTEMS DAMP CURE
Twistfix Limited Peter House Oxford Street Manchester M1 5AN Tel: 0845 123 6007 Fax: 0845 308 7007 e-mail: sales@twistfix.co.uk website: www.twistfix.co.uk APPROVAL INSPECTION TESTING CERTIFICATION TECHNICAL
More informationSTONE PRODUCT SPECIFICATION SANDSTONE. Some typical installation methods are: Pedestrian traffic only: reinforced concrete* 75mm thick
Please note these tips are guides only and should be used in addition to the relevant Australian Standards for trade practices. Note that installation may vary from site to site with varying conditions
More informationECO OUTDOOR INSTALLATION TIPS WALLING TRADITIONAL FORMAT MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T ECOOUTDOOR.COM.
ECO OUTDOOR INSTALLATION TIPS WALLING TRADITIONAL FORMAT MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T. 1300 13 14 13 ECOOUTDOOR.COM.AU Installations Tips Please note these tips are guides only and should
More informationMethod Statement. For RSA Coating Systems Over M Grade Expanded Polystyrene (EPS)
Method Statement For RSA Coating Systems Over M Grade Expanded Polystyrene RSA strongly recommend the use of our full render, texture paint systems over polystyrene substrates. We DO NOT recommend mixing
More informationGeneral Glass Mosaic Tile Fixing Specification for Immersed Installations.
General Glass Mosaic Tile Fixing Specification for Immersed Installations. This specification covers the installation of dot mounted glass mosaic inside of, and around concrete Swimming Pools. Refer to
More informationTECHNICAL INFORMATION SCREED
TECHNICAL DATA SHEET SCREED Ver Nov 2015 TECHNICAL INFORMATION SCREED Product Data Sheet No. 110/01 INTRODUCTION Tarmac ready-to-use cement sand levelling screed is a correctly proportioned factory produced
More informationCHAPTER 1: Tolerances
CONTENTS 1.1 MASONRY 1.2 INTERNAL WALLS AND CEILINGS 1.3 JUNCTIONS 1.4 FLOORS 1.5 DOORS AND WINDOWS 1.6 SKIRTINGS 1.7 FINISHES AND FITTED FURNITURE 1.8 EXTERNAL WORKS FUNCTIONAL REQUIREMENT 1.0 INTRODUCTION
More information3910 E. McKinney Denton, TX P.O. Box Dallas, TX EZ WALL CONCENTRATE, INC
EZ Spread Coarse Sand Description EZ Spread is the perfect material for small projects and repairs. This factory prepared blend of portland cement proprietary additives, and sand. EZ Spread is designed
More informationPlaster systems. High quality lining solutions providing the perfect finish for your walls
C07 Linings High quality lining solutions providing the perfect finish for your walls All our systems are covered by SpecSure when using genuine Gyproc and Isover products Gyproc plasters offer a full
More informationEzarri JointPoint Glass Mosaic Tile Installation in Immersed Installations. 10 Year System Warranty.
Ezarri JointPoint Glass Mosaic Tile Installation in Immersed Installations. 10 Year System Warranty. This specification covers the installation of Ezarri JointPoint Glass Mosaic tiles inside a concrete
More informationSECTION PORTLAND CEMENT PLASTERING
SECTION 09 2400 PORTLAND CEMENT PLASTERING This section includes editing notes to assist the user in editing the section to suit project requirements. These notes are included as hidden text, and can be
More informationHOW TO: BOARD ROOMS WITH HIGH HUMIDITY AND CONDENSATION GTEC MOISTURE AND VAPOUR BOARD WITH PLASTERBOARD
HOW TO: BOARD ROOMS WITH HIGH HUMIDITY AND CONDENSATION WITH PLASTERBOARD GTEC MOISTURE AND VAPOUR BOARD 3 MOISTURE AND HUMIDITY Kitchens, utility rooms and cloak rooms are areas of high humidity, modern
More information4. Floor Substrate Testing Prior to Floor Paint application
4. Floor Substrate Testing Prior to Floor Paint application At Buy Floor Paint we have tried to summarise some simple and practical tests that you can do with commonly available materials and equipment,
More informationECO OUTDOOR INSTALLATION TIPS WALLING STONE WALL PANELS
ECO OUTDOOR INSTALLATION TIPS WALLING STONE WALL PANELS FLOORING WALLING FURNITURE WWW.ECOOUTDOORUSA.COM Installations Tips Please note these tips are guides only and should be used in addition to the
More informationTECHNICAL DATA SHEET AUS-FLEX GOOD as GOLD LIGHT
POLYMER AND RUBBER FORTIFIED FLEXIBLE, LIGHTWEIGHT MULTI-PURPOSE ADHESIVE SUITABLE FOR: PORCELAIN TILE ALL MASONRY SURFACES CERAMIC TILE CONCRETE QUARRY TILE RENDER, BRICK AND BLOCK WORK MOSAIC TILE AND
More informationTECHNICAL DATA SHEET AUS-FLEX MULTI
FLEXIBLE TILE & STONE ADHESIVE POLYMER & RUBBER REINFORCED INTERNAL & EXTERNAL USE SUITABLE FOR: PORCELAIN TILE ALL MASONRY SURFACES CERAMIC TILE CONCRETE QUARRY TILE RENDER, BRICK & BLOCK WORK MOSAIC
More informationTECHNICAL DATA SHEET AUS-FLEX MULTI-LIGHT 9.5
FLEXIBLE, LIGHTWEIGHT TILE AND STONE ADHESIVE POLYMER AND RUBBER REINFORCED FOR WALLS AND FLOORS INTERNAL AND EXTERNAL USE SUITABLE FOR: PORCELAIN TILE ALL MASONRY SURFACES CERAMIC TILE CONCRETE QUARRY
More informationInstallation of Ceramic Tile in Swimming Pools
Installation of Ceramic Tile in Swimming Pools TDS 192 DESIGN CONSIDERATIONS I. Primary types of swimming pool structures A. Cast-in-place reinforced concrete 1. Definition concrete placed or pumped on-site
More informationDATA SHEET DEKSTER 131 SELFLEVELLING FLOOR COAT / UNDERLAY
(Page 1 of 8 ) GENERAL DESCRIPTION - Dekster 131 self levelling is a contemporary coating that achieves hard wearing, utilitarian floor surfaces in a range of natural tones to offset any style of interior.
More informationCHAPTER 1: Tolerances
CONTENTS 1.1 MASONRY 1.2 INTERNAL WALLS AND CEILINGS 1.3 JUNCTIONS 1.4 FLOORS 1.5 DOORS AND WINDOWS 1.6 SKIRTINGS 1.7 FINISHES AND FITTED FURNITURE 1.8 EXTERNAL WORKS 5 Chapter 1 FUNCTIONAL REQUIREMENTS
More informationCavity Drain Systems.
Grommet & Nail Platon Sealing Rope Sheet Piling Platon P8 Platon P8 Platon Cornerstrip Platon P20 Membrane Reinforced Concrete incorporating: Triton TT Super Admix @ 1.2Kg/100Kg OPC Sheet Piling PLATON
More informationHOW TO: BOARD BATHROOMS, WET ROOMS & SHOWERS
HOW TO: BOARD BATHROOMS, WET ROOMS & SHOWERS 1 FOCUS ON GETTING IT RIGHT As with any building project the quality of finish is determined by the foundation upon which it is installed. The most important
More informationCONTRACTORS SHOULD INCLUDE A COPY OF THIS SPECIFICATION WITH THEIR QUOTATION TO THE CLIENT.
Park Road, Barrow-in-Furness, Cumbria. LA14 4EQ. e-mail labs@sovchem.co.uk Fax: 01229 840870 Technical Advice Line: 0845 603 0722 CONTRACTORS SHOULD INCLUDE A COPY OF THIS SPECIFICATION WITH THEIR QUOTATION
More informationTECHNICAL DATA SHEET AUS-CRETE PREMIUM INDUSTRIAL
SUITABLE FOR HEAVY TRAFFIC, SWIMMING POOLS, TILE AND STONE FACADES INDUSTRIAL GRADE ADHESIVE EXTRA HEAVY DUTY SHOCK AND VIBRATION RESISTANT SUITABLE FOR: EXTRA LARGE TILE AND STONE ALL MASONRY SUBSTRATES
More informationCOSVR67 - SQA Unit Code DY92 04 Produce external solid render finishes
Overview This standard is about 1 interpreting information 2 adopting safe and healthy working practices 3 selecting materials and equipment 4 preparing materials and applying render to external backgrounds
More informationINSTALLATION METHOD STATEMENT
INSTALLATION METHOD STATEMENT 1.0 Introduction - Liquid screed is a flowing screed flooring system comprising a calcium sulphate binder, fine aggregate and water. - It is for internal use only, in general
More informationE Floors Sm , ,850, F Landings Sm 18 1, , G 20 x 100 mm Tile Skirting : cut to size Lm ,500.
ELEMENT No. 5 FLOOR All samples to be provided by Contractor and submitted to Architect for approval before incorporation in the finished works. Cement and sand (1:4): to hacked floors: A B C D 32 mm thick
More informationEzarri JointPoint Glass Mosaic Tile Installation in Immersed Installations. 10 Year System Warranty.
Ezarri JointPoint Glass Mosaic Tile Installation in Immersed Installations. 10 Year System Warranty. This specification covers the installation of Ezarri JointPoint Glass Mosaic tiles inside of, and around
More informationTECHNICAL DATA SHEET AUS-MAXIGRIP TEN YEAR WARRANTY AUSTRALIAN STANDARS COMPLIANCE C2 T S1 LOW VOC GREEN FOOTPRINT
Description: Aus-MaxiGrip: Provides a high performance flexible polymer fortified adhesive with excellent slip resentence that is used for installing a wide range of tile and stone, made from lightweight
More informationEPIC F312. Uniclass. CI/SfB April Yq4. Natural Hydraulic Lime Mortar
Uniclass CI/SfB April 2017 EPIC F312 Yq4 Natural Hydraulic Lime Mortar K Lime: a range of dry bagged mortars made from Natural Hydraulic Lime, selected sand and other performance enhancing additives, derived
More informationFor RSA Coating Systems over For RSA Coating Systems over Austech Foamula Extruded Polystyrene (XPS) (Skin Off)
Austech Foamula Extruded Polystyrene (XPS) (Skin Off) RSA strongly recommend the use of our full render and texture systems with the appropriate water tight membrane over polystyrene products. SEVEN STEPS
More informationAppendix 6: Mapping of 21844VIC to 22216VIC
Appendix 6: Mapping of to 22216VIC Mapping table from Certificate II in Building and Construction (Bricklaying, Carpentry, Solid Plastering) to Construction (Bricklaying, Carpentry, Ceiling Lining, Wall
More informationTECHNICAL DATA SHEET NO:503 VERSION: 2/1 ST MARCH 1999
PAGE: 1 of 17. EVERBUILD SBR BOND DESCRIPTION EVERBUILD SBR BOND is a white liquid, which has numerous uses as an admixture, primer, bonding agent and sealer. Polymer Emulsions of this type have been used
More informationMANUFACTURER S SPECIFICATIONS Section LIMESTONE PLASTER
MANUFACTURER S SPECIFICATIONS Section 09220 LIMESTONE PLASTER LE DÉCOR LIMESTONE PART 1 GENERAL 1.1 General A. This section describes the requirements for furnishing and installing Limestone Plaster. 1.2
More informationGYPSUM BOARD AND PLASTER
CHAPTER 25 SECTION 2501 GENERAL 2501.1 Scope. 2501.1.1 General. Provisions of this chapter shall govern the materials, design, construction and quality of gypsum board, lath, gypsum plaster and cement
More informationModule 3 Slabbing, Skimming, Dry Lining and Floors UNIT: 1 Slabbing Studded Walls
TRADE OF PLASTERING PHASE 2 Module 3 Slabbing, Skimming, Dry Lining and Floors UNIT: 1 Produced by In cooperation with subject matter expert: Terry Egan Some images & text courtesy of Gypsum Industries
More informationVITCAS FIREPLACE RENDER & HEAT RESISTANT PLASTER
FIEPLACE ENDE & HEAT ESISTANT PLASTE WALL Heat esistant Filler max. 6mm Heat esistant Plaster min. 10mm AEA OF HIGH HEAT Fireplace ender PVA Adhesive Sealer 900mm 400mm 400mm 400mm ISO 9001 APPOVED 8 Bonville
More informationFoirgniochta. Marking Scheme Leaving Certificate Examination, Ordinary Level. Construction Studies
2000 Foirgniochta Marking Scheme Leaving Certificate Examination, 2000 Construction Studies Ordinary Level of site.. Adjoining. Distinct Landmarks.. site in Red.. 1: (ii) Site Boundary site. Site. Drainage
More informationResin Bound Installation Guide
Resin Bound Installation Guide Key Contact Details Customer Service / Sales: 01484 400855 Email: info@theresinmill.co.uk The Resin Mill ltd, St Pegs Mill, Thornhill Beck Lane, Brighouse HD6 4AH Introduction
More informationM40 STONE / CONCRETE / CERAMIC TILING / MOSAIC To be read with preliminaries/general conditions
M40 GUIDE RECOMMENDATION M40 STONE / CONCRETE / CERAMIC TILING / MOSAIC To be read with preliminaries/general conditions Document prepared for: Recommendations for: Armatile Station Road Industrial Estate
More informationRhinoPlast. RhinoWall. RhinoCeil. GypWall. DonnCeil. Saint-Gobain Construction Product Service Centres. Saint-Gobain Gyproc (Pty) Ltd
Saint-Gobain Gyproc (Pty) Ltd SHARED SERVICE CENTRE 77 Ostend Road, Germiston Tel: (011) 345 5300 Fax: (011) 345 5301 BRAKPAN FACTORY Tel: (011) 365 9600 Fax: (011) 736 6500 GERMISTON FACTORY Tel: (011)
More informationSSS001: Substrate Specification Sheet 1 - Plasterboard Drylining Installation and Finishing
SSS001: Substrate Specification Sheet 1 - Plasterboard Drylining Installation and Finishing Page 1 of 20 Document: 9678.53 Collection: 116: Substrate Specification Sheets (SSS) Modified: 28/10/2016 09:50
More informationCDK Neolith Reduced Thickness Porcelain Panel Installation Specification.
CDK Neolith Reduced Thickness Porcelain Panel Installation Specification. This specification covers the installation of Neolith Reduced Thickness Porcelain Panel to concrete or other suitable masonry substrates.
More informationroofing ROOFING Design of the base ROOFING DETAILS
DETAILS The general arrangement details and the principles to be followed at skirtings, upstands, abutments, verges, gutters and expansion joints are as details illustrated. SELECTION PARAMETERS It is
More informationECO OUTDOOR INSTALLATION TIPS FLOORING COBBLESTONES
ECO OUTDOOR INSTALLATION TIPS FLOORING COBBLESTONES FLOORING WALLING FURNITURE WWW.ECOOUTDOORUSA.COM Installations Tips Please note these tips are guides only and should be used in addition to the relevant
More informationHardscaping Installation Manual
Hardscaping Installation Manual INDEX Installation of Pavers... 1 Installation of Meshed Flagstone... 2 Installation of Veneer Stone... 3 Sand Set Installation of Pavers 1. Preparing the ground Mark your
More information7Do not walk on concrete for 24 hours. 8
4 On an uneven or clay base, place a 50mm layer of sand or road base to form an even bedding for concrete. This will also reduce the likelihood of cracking as the concrete has a firm base on which to rest.
More informationEUROMIX DRY MORTAR SYSTEMS EUROMIX ONE COAT RENDER
CPI Mortars Limited Willow House Strathclyde Business Park Bellshill Lanarkshire ML4 3PB Tel: 01698 464110 Fax: 01698 464111 e-mail: info@euromix.com website: www.euromix.com APPROVAL INSPECTION TESTING
More informationWYKAMOL CHEMICAL DAMP-PROOFING SYSTEMS ULTRACURE
Wykamol Group Unit 3, Boran Court Network 65 Business Park Hapton, Burnley Lancashire BB11 5TH Tel: 0845 400 6666 Fax: 0845 400 3333 e-mail: sales@wykamol.com website: www.wykamol.com APPROVAL INSPECTION
More informationECO OUTDOOR INSTALLATION TIPS FLOORING SPLIT STONE
ECO OUTDOOR INSTALLATION TIPS FLOORING SPLIT STONE FLOORING WALLING FURNITURE WWW.ECOOUTDOORUSA.COM Installations Tips Please note these tips are guides only and should be used in addition to the relevant
More informationVitripiazza Installation Guide
Vitripiazza Installation Guide Italian vitrified porcelain paving A. Planning and Sub base Once you ve decided where your patio is going, draw a detailed plan to scale on graph paper. Put in all the dimensions
More informationPRACTICAL TASK MANUAL
6808-33 Level 3 Diploma in Plastering December 2017 Version 1.2 PRACTICAL TASK MANUAL Contents Task manual amendments 2 Candidate details 3 Unit assessment overview 4 Practical task completion record 4
More informationECO OUTDOOR INSTALLATION TIPS FLOORING PORPHYRY
ECO OUTDOOR INSTALLATION TIPS FLOORING PORPHYRY FLOORING WALLING FURNITURE WWW.ECOOUTDOORUSA.COM Installations Tips Please note these tips are guides only and should be used in addition to the relevant
More informationCOSVR67 SQA Unit Code HL75 04 Apply solid render to background surfaces and produce finishes
Apply solid render to background surfaces and produce finishes Overview This standard is about interpreting information, adopting safe, healthy and environmentally responsible work practices, selecting
More informationSection 10. Rendering, Plasterboard & Fibre Cement Sheeting
MARKETING PROPERTY-PROJECT SERVICES STD - D905 VOLUME 2 Service Station Construction SPECIFICATION Section 10 Rendering, Plasterboard & Fibre Cement Sheeting Index 10.1 Extent of Work 10.2 Rev 07.8 General
More informationTECHNICAL DATA SHEET AUS-CRETE MPA
MULTI-PURPOSE ADHESIVE WALLS AND FLOORS DOMESTIC AND COMMERCIAL TILE AND STONE SUITABLE FOR: LARGE TILE AND STONE ALL MASONRY SURFACES MARBLE AND GRANITE RENDER, BRICK AND BLOCK WORK PORCELAIN CEMENT SHEET
More informationRIW LIQUID ASPHALTIC COMPOSITION Membrane étanche à l humidité Feuchtigkeitssperre. Regulations. Requirement: C2(a) Resistance to moisture Comment:
RIW Ltd Arc House Terrace Road South Binfield Bracknell Berkshire RG42 4PZ Tel: 01344 397777 Fax: 01344 862010 e-mail: technical@riw.co.uk website: www.riw.co.uk CI/SfB a Vs1 Agrément Certificate No 89/2278
More informationSIDER-BASE CONCENTRATE AAC/ MONOSIDERAL AAC THE ULTIMATE OLD-WORLD AERATED CONCRETE-AAC DECORATIVE STUCCO SYSTEM
SIDER-CRETE, INC. 153 Regur Road Hawkinsville, GA 31036 USA Ph: 478.892.9800 www.sider-crete.com SIDER-BASE CONCENTRATE AAC/ MONOSIDERAL AAC THE ULTIMATE OLD-WORLD AERATED CONCRETE-AAC DECORATIVE STUCCO
More informationECO OUTDOOR INSTALLATION TIPS FLOORING COBBLESTONES MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T ECOOUTDOOR.COM.AU
ECO OUTDOOR INSTALLATION TIPS FLOORING COBBLESTONES MELBOURNE SYDNEY BRISBANE ADELAIDE PERTH T. 1300 13 14 13 ECOOUTDOOR.COM.AU Installations Tips Please note these tips are guides only and should be used
More informationMANUFACTURER'S SPECIFICATIONS Section ST. ASTIER LIME PLASTER (NHL) PLASTER ON CONCRETE
MANUFACTURER'S SPECIFICATIONS Section 09225 ST. ASTIER LIME PLASTER (NHL) PLASTER ON CONCRETE ST. ASTIER NATURAL HYDRAULIC LIME PLASTER PART 1 GENERAL 1.1 Summary A. This Section includes St. Astier Natural
More information