VEHICLE BODYWORK Detail and groom a vehicle
|
|
- Elfreda Jenkins
- 6 years ago
- Views:
Transcription
1 1 of 5 level: 2 credit: 4 planned review date: December 2009 sub-field: purpose: entry information: accreditation option: moderation option: Motor Industry People credited with this unit standard are able to: detail exterior of the vehicle; buff, glaze, and polish the vehicle s exterior paintwork; detail vehicle surfaces other than paint; and groom interior of the vehicle. Open. Evaluation of documentation by NZQA and industry. A centrally established and directed national moderation system has been set up by the NZ Motor Industry Training Organisation. special notes: 1 Enactments relevant to this unit standard include but are not limited to Health and Safety in Employment Act 1992; Resource Management Act 1991; local body regulations. 2 Reference to supervisor s requirements means that the supervisor requires that the standard must comply with vehicle preparation standards and requirements determined by the company involved. 3 The practical skills of this standard can be assessed in the workplace or off-job. For the purpose of off-job assessment, the term supervisor means the training provider.
2 2 of 5 Elements and Performance Criteria element 1 Detail exterior of the vehicle. 1.1 Safe working practices are observed throughout the task according to legislative 1.2 Examination of exterior is completed before grooming to enable prior damage to be recorded and particular needs attended to. 1.3 The environment for detailing is selected to ensure that no outside conditions influence or damage the job carried out. 1.4 Exterior is prepared and washed to a standard acceptable to the supervisor. dewax, detergent and sponge or soft bristle brush or steam cleaner. 1.5 Exterior is dried to the supervisor s cotton towelling, chamois. 1.6 Tar, concrete, and paint spots are removed without damage to the paintwork and glass. 1.7 Unwanted panel transfers, logos, and stickers are removed without damage to the paintwork and glass. 1.8 Engine compartment is cleaned to the supervisor s
3 3 of 5 element 2 Buff, glaze, and polish the vehicle s exterior paintwork. 2.1 Safe working practices are observed throughout the task. 2.2 Buffing, glazing, and polishing processes are selected according to the exterior condition. 2.3 Paintwork type is determined according to the vehicle s manufacturer's identification plate. 2.4 Vehicle paint surface finish meets the supervisor s element 3 Detail vehicle surfaces other than paint. 3.1 Safe working practices are observed throughout the task according to legislative 3.2 Vinyl surfaces are cleaned and treated to the supervisor s 3.3 Tyre walls are finished to the supervisor s 3.4 Chrome, stainless steel, alloy, and painted plastics are cleaned and polished to the supervisor s 3.5 Glass components are cleaned to the supervisor s
4 4 of 5 element 4 Groom interior of the vehicle. 4.1 Safe working practices are observed throughout the task according to legislative 4.2 Examination of interior is completed before grooming to ensure that loose items are stored to the satisfaction of the customer. 4.3 Upholstery is cleaned in a manner that prevents damage occurring to coverings. vacuuming, shampoo, dry cleaning. 4.4 Interior is vacuumed to a standard acceptable to the supervisor. 4.5 Stains are removed without damage to the surface. 4.6 Vinyl and plastic surfaces are treated to the supervisor s 4.7 Smell neutralisers are applied to the customer s satisfaction. 4.8 Accessory fittings and controls are in the same position as they were prior to the detailing. Comments on this unit standard Please contact the NZ Motor Industry Training Organisation jlane@mito.org.nz if you wish to suggest changes to the content of this unit standard. Please Note Providers must be accredited by the Qualifications Authority or a delegated interinstitutional body before they can register credits from assessment against unit standards or deliver courses of study leading to that assessment. Industry Training Organisations must be accredited by the Qualifications Authority before they can register credits from assessment against unit standards.
5 5 of 5 Accredited providers and Industry Training Organisations assessing against unit standards must engage with the moderation system that applies to those standards. Accreditation requirements and an outline of the moderation system that applies to this standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The AMAP also includes useful information about special requirements for providers wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource This unit standard is covered by AMAP 0014 which can be accessed at
VEHICLE BODYWORK Mask a repair for priming; and prime, fill, and sand a repair in the motor body industry
1 of 5 level: 2 credit: 3 planned review date: December 2009 sub-field: Motor Industry replacement information: This unit standard and unit standard 21703 replaced unit standard 3868 and unit standard
More informationAUTOMOTIVE WORKSHOP ENGINEERING Demonstrate good work habits and perform safe work practices in the motor and related industries
1 of 6 level: 2 credit: 4 planned review date: December 2009 sub-field: Motor Industry replacement information: This unit standard replaced unit standard 226 and unit standard 16098. purpose: entry information:
More informationPUBLIC SECTOR SERVICE DELIVERY Establish client needs and gain agreement on requirements for public sector service delivery
1 of 5 level: 6 credit: 15 planned review date: February 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard
More informationPUBLIC SECTOR SERVICE DELIVERY Develop public sector service delivery objectives, and implement systems to meet client needs
1 of 5 level: 7 credit: 20 planned review date: February 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard
More informationAUTOMOTIVE WORKSHOP ENGINEERING Use an oxy-acetylene welding plant in the motor industry
1 of 5 level: 2 credit: 3 planned review date: December 2009 sub-field: Motor Industry replacement information: This unit standard and unit standard 21682 replaced unit standard 230 and unit standard 3885.
More informationLEATHER - BOTTOM STOCK, MAKING AND LASTING Clean, dress, and spray footwear in a shoe room
1 of 6 level: 3 credit: 18 planned review date: November 2005 sub-field: purpose: entry information: accreditation option: moderation option: special notes: Footwear and Leather Trades People credited
More informationDemonstrate knowledge of servicing automotive air conditioning systems
Demonstrate knowledge of servicing automotive air conditioning systems 24448 version 1 Page 1 of 5 Level 3 Credits 2 Purpose This theory-based unit standard is for people in the automotive repair industry.
More informationNZQA registered unit standard version 1 Page 1 of 5. Determine and describe construction of medium and large buildings
Page 1 of 5 Title Determine and describe construction of medium and large buildings Level 6 Credits 20 Purpose People credited with this unit standard are able to, for medium and large buildings, determine
More informationRemove and repair perforated non-structural body panel corrosion damage
Page 1 of 5 Remove and repair perforated non-structural body panel corrosion damage Level 3 Credits 3 Purpose This unit standard is for people who work in the motor body industry. People credited with
More informationGOODS SERVICE Operate a truck mounted sidelifter
1 of 6 level: 3 credit: 6 planned review date: March 2009 sub-field: purpose: entry information: accreditation option: moderation option: Commercial Road Transport People credited with this unit standard
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Analyse surface material and construction requirements and apply to developed kitchen or bathroom designs Level 5 Credits 10 Purpose This unit standard is for experienced people working
More informationCarry out routine maintenance on automotive automatic transmissions
Page 1 of 5 Carry out routine maintenance on automotive automatic transmissions Level 3 Credits 4 Purpose This unit standard is for people in the automotive repair industry. People credited with this unit
More informationDemonstrate the requirements for holding permits on high voltage electrical equipment
Page 1 of 6 Demonstrate the requirements for holding permits on high voltage electrical equipment Level 3 Credits 2 Purpose People credited with this unit standard are able to: describe the requirements
More informationROAD TRANSPORT OPERATIONS Manage the transport of overdimension and overweight loads by road
1 of 7 level: 5 credit: 10 planned review date: July 2009 sub-field: purpose: Commercial Road Transport This unit standard is intended for people who are involved with managing the despatch and/or supervision
More informationTest and service hydraulic systems on equipment, vehicles, and/or machines
Page 1 of 5 Test and service hydraulic systems on equipment, vehicles, and/or machines Level 3 Credits 6 Purpose This unit standard is for people in the automotive repair industry. People credited with
More informationPrepare a schedule of quantities, cost estimate and tender documentation for landscape work
Page 1 of 5 Prepare a schedule of quantities, cost estimate and tender documentation for landscape work Level 5 Credits 15 Purpose This unit standard is for people working, or intending to work, in landscaping.
More informationVEHICLE BODYWORK Demonstrate knowledge of vehicle body and structural design principles
1 of 6 level: 5 credit: 6 planned review date: December 2008 sub-field: purpose: entry information: accreditation option: moderation option: Motor Industry People credited with this unit standard are able
More informationMeet Approved Handler requirements for the transport of bulk hazardous substances by road
Meet Approved Handler requirements for the transport of bulk hazardous substances by road 25986 version 1 Page 1 of 5 Level 4 Credits 6 Purpose This unit standard is for the drivers of road transport vehicles
More informationAssist press operator on a reel-fed printing press
Page 1 of 5 Assist press operator on a reel-fed printing press Level 2 Credits 12 Purpose People credited with this unit standard are able to: follow safety requirements for the press being used; check
More informationPOULTRY MANAGEMENT Manage hatchery operations
1 of 5 level: 4 credit: 32 planned review date: December 2008 sub-field: purpose: entry information: accreditation option: moderation option: Poultry Production People credited with this unit standard
More informationNZQA registered unit standard version 2 Page 1 of 5
Page 1 of 5 Title Display products in the salon environment Level 2 Credits 3 Purpose This unit standard is for entry-level learners working and intending to work in a salon People credited with this unit
More informationCarry out off-road motorcycle training
Page 1 of 5 Carry out off-road motorcycle training Level 5 Credits 10 Purpose People credited with this unit standard are able to: prepare for a training session in riding motorcycles off-road; conduct
More informationControl pests by fumigation in the urban pest management industry
Page 1 of 5 Control pests by fumigation in the urban pest management industry Level 4 Credits 15 Purpose This is a specialist unit standard for people training for the urban pest management industry. People
More informationLEATHER - CUTTING AND CLOSING Perform specialist footwear closing operations
1 of 5 level: 2 credit: 9 planned review date: November 2005 sub-field: purpose: entry information: accreditation option: moderation option: special notes: Footwear and Leather Trades People credited with
More informationPUBLIC SECTOR COMPLIANCE MANAGEMENT Audit quality management systems for compliance with weights and measures legislation
1 of 6 level: 6 credit: 13 planned review date: December 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard
More informationTransport horses by road
Page 1 of 5 Transport horses by road Level 4 Credits 25 Purpose This unit standard is for drivers of road transport vehicles carrying horses. People credited with this unit standard are able to: describe
More informationQUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 1 and 2 Certificate / Diploma in Vehicle Valeting Principles (4290-41/42) October 2013 Version 1.1 Qualification at a glance Subject area City & Guilds number 4290 Age group
More informationMake ready a sheet-fed offset printing press for spot colour work
Make ready a sheet-fed offset printing press for spot colour work 26318 version 1 Page 1 of 5 Level 3 Credits 30 Purpose People credited with this unit standard are able to: check job documentation and
More informationInstall and commission high voltage (HV) electricity current transformer metering
Page 1 of 5 Install and commission high voltage (HV) electricity current transformer metering Level 4 Credits 10 Purpose People credited with this unit standard are able to: demonstrate knowledge of the
More informationDEMOLITION Operate a hydraulic excavator on demolition sites
1 of 7 level: 3 credit: 25 planned review date: November 2007 sub-field: purpose: entry information: accreditation option: moderation option: Civil Works and Services People credited with this unit standard
More informationNZQA registered unit standard version 4 Page 1 of 5
Page 1 of 5 Title Demonstrate the requirements for holding access permits for work on high voltage electrical lines, cables, and equipment Level 3 Credits 4 Purpose People credited with this unit standard
More informationTransport perishable products by road
Page 1 of 5 Transport perishable products by road Level 4 Credits 25 Purpose This unit standard is for those who drive, or intend to drive, road transport vehicles transporting perishable products. People
More informationNZQA registered unit standard version 2 Page 1 of 5. Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident
Page 1 of 5 Title Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident Level 4 Credits 4 Purpose People credited with this unit standard are able to describe: the interrelated
More informationSet up, repair and maintain a Baader BA 190 fish filleting machine
Set up, repair and maintain a Baader BA 190 fish filleting machine 17949 version 3 Page 1 of 6 Level 6 Credits 50 Purpose People credited with this unit standard are, for a Baader BA 190 fish filleting
More informationProduce screens, and make stencils using the capillary system, for screen printing
Page 1 of 5 Produce screens, and make stencils using the capillary system, for screen printing Level 3 Credits 12 Purpose People credited with this unit standard are able to: check documentation and confirm
More informationELECTRICITY SUPPLY - POWER SYSTEM MAINTENANCE Carry out routine inspection and servicing on high voltage minimum oil circuit breakers
1 of 9 level: 4 credit: 6 planned review date: December 2006 sub-field: purpose: entry information: Electricity Supply People credited with this unit standard are able to: prepare for inspection, testing
More informationEstablish quality requirements, manage, and monitor the installation of subdivision infrastructure
Page 1 of 5 Establish quality requirements, manage, and monitor the installation of subdivision infrastructure Level 6 Credits 18 Purpose This unit standard is for people who are working, or who intend
More informationLOGISTICS OPERATIONS Plan distribution centre structure and equipment for a logistics operation
1 of 5 level: 5 credit: 8 planned review date: February 2004 sub-field: purpose: entry information: accreditation option: moderation option: Logistics People credited with this unit standard are able to:
More informationOperate a root crop harvester
Page 1 of 5 Operate a root crop harvester Level 4 Credits 20 Purpose People credited with this unit standard are able to: select and prepare root crop harvesting equipment and machinery; carry out field
More informationSECURITY STAFF SERVICES Demonstrate knowledge of and operate electronic equipment as a security officer
1 of 5 level: 3 credit: 5 planned review date: March 2007 sub-field: purpose: Security This unit standard covers the use of electronic equipment for security s. People credited with this unit standard
More informationExplain foot and mouth disease controls in the processing of milk in the dairy industry
Page 1 of 5 Explain foot and mouth disease controls in the processing of milk in the dairy industry Level 3 Credits 4 Purpose People credited with this unit are able to: explain the features and characteristics
More informationGOODS SERVICE Transport bulk dry goods by heavy motor vehicle
1 of 7 level: 3 credit: 6 planned review date: March 2009 sub-field: purpose: entry information: accreditation option: moderation option: Commercial Road Transport People credited with this unit standard
More informationManage the transportation of hazardous substances by road
Manage the transportation of hazardous substances by road Page 1 of 5 Level 6 Credits 10 Purpose This unit standard is for carriers of goods service vehicles carrying hazardous substances. People credited
More informationNZQA registered unit standard version 1 Page 1 of 5. Construction Trades > Painting and Decorating
Page 1 of 5 Title Apply advanced decorative paint finishes Level 5 Credits 20 Purpose This specialist unit standard is for people working in the painting area of the painting and decorating sector. People
More informationCheck, coat and reinforce polystyrene substrate to form a Proprietary Plaster Cladding System on site
Page 1 of 5 Check, coat and reinforce polystyrene substrate to form a Proprietary Plaster Cladding System on site Level 3 Credits 20 Purpose People credited with this unit standard are able to: check polystyrene
More informationNZQA registered unit standard version 3 Page 1 of 5
Page 1 of 5 Title Apply occupational health and safety requirements in the road transport and logistics industry Level 5 Credits 8 Purpose This unit standard is designed for team leaders, despatchers,
More informationELECTRICITY SUPPLY - POWER SYSTEM MAINTENANCE Carry out routine inspection and service on oil filled distribution power transformers 11kV to 400V
1 of 8 level: 4 credit: 8 planned review date: December 2006 sub-field: purpose: entry information: Electricity Supply People credited with this unit standard are able to: prepare for routine service transformers
More informationPOULTRY HATCHERY Process day-old poultry chicks
1 of 5 level: 3 credit: 10 planned review date: December 2008 sub-field: purpose: entry information: accreditation option: moderation option: Poultry Production People credited with this unit standard
More informationCheck, coat and reinforce fibre cement substrate to form a Proprietary Plaster Cladding System on site
Page 1 of 5 Check, coat and reinforce fibre cement substrate to form a Proprietary Plaster Cladding System on site Level 3 Credits 20 Purpose People credited with this unit standard are able to: check
More informationGOODS SERVICE Transport vehicles by road transporter
1 of 5 level: 4 credit: 3 planned review date: March 2009 sub-field: purpose: Commercial Road Transport This unit standard is for drivers of road haulage vehicles carrying vehicles. People credited with
More informationInstruct a programme using low ropes course activities
Page 1 of 5 Instruct a programme using low ropes course activities Level 5 Credits 5 Purpose People credited with this unit standard are able to: prepare for instructing low ropes course activities; instruct
More informationSet up, repair and maintain a Baader BA 212CK fish filleting machine
Page 1 of 5 Set up, repair and maintain a Baader BA 212CK fish filleting machine Level 6 Credits 50 Purpose People credited with this unit standard are, for a Baader BA 212CK fish filleting machine, able
More informationNational Certificate in Concrete Product Manufacture (Masonry Product) (Level 3)
NQF Ref 1530 Version 1 Page 1 of 6 National Certificate in Concrete Product Manufacture (Masonry Product) (Level 3) Level 3 Credits 69 Purpose The National Certificate in Concrete Product Manufacture (Masonry)
More informationCarry out general service checks on non-electric forklifts and forklift attachments
Page 1 of 5 Carry out general service checks on non-electric forklifts and forklift attachments Level 3 Credits 4 Purpose This unit standard is for people in the materials handling equipment repair industry.
More informationApply earths to and remove earths from electrical conductors, plant and equipment
Page 1 of 5 Apply earths to and remove earths from electrical conductors, plant and equipment Level 3 Credits 2 Purpose People credited with this unit standard are able to: demonstrate knowledge of earthing
More informationTrim and limb shelter belts
Page 1 of 5 Trim and limb shelter belts Level 4 Credits 10 Purpose People credited with this unit standard are able to: select and prepare trimming and limbing equipment and machinery; carry out field
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Operate timber treatment plant Level 3 Credits 15 Purpose People credited with this unit standard are able to: manage hazards associated with operating and maintaining timber treatment
More informationDescribe practices to maintain the quality of perishable products during transport by road
Page 1 of 5 Describe practices to maintain the quality of perishable products during transport by road Level 3 Credits 5 Purpose This unit standard is for those who drive, or intend to drive, road transport
More informationMeasure and prune trees around electricity lines for vegetation control to minimum approach distance
Page 1 of 5 Measure and prune trees around electricity lines for vegetation control to minimum approach distance Level 4 Credits 8 Purpose People credited with this unit standard are able to: select tree
More informationCarry out routine inspection and servicing on substation emergency services
Page 1 of 6 Carry out routine inspection and servicing on substation emergency services Level 3 Credits 4 Purpose People credited with this unit standard are able to: prepare for inspection and servicing
More informationRIGGING Complete basic rigging work
1 of 5 level: 2 credit: 35 planned review date: December 2010 sub-field: purpose: entry information: accreditation option: moderation option: Lifting Equipment People credited with this unit standard are
More informationThis unit standard is expiring
Page 1 of 5 Title Apply intelligence analysis techniques to complete an intelligence product Level 5 Credits 15 Purpose People credited with this unit standard are able to: define the intelligence problem
More informationEMPLOYMENT SUPPORT Demonstrate an integrated practice theory for employment support
1 of 8 level: 6 credit: 15 planned review date: June 2005 sub-field: purpose: entry information: accreditation option: moderation option: Social Services People credited with this unit standard are able
More informationDemonstrate an advanced knowledge of railway signals
Page 1 of 5 Demonstrate an advanced knowledge of railway signals Level 4 Credits 15 Purpose People credited with this unit standard are able to: demonstrate an advanced knowledge of fixed railway signals,
More informationPEST MONITORING Design a possum population monitoring programme
1 of 5 level: 5 credit: 10 planned review date: November 2007 sub-field: purpose: Pest Management This unit standard is for people involved with designing possum population monitoring s for rural environments.
More informationCarry out acceptance and maintenance tests on distance protection relays
Page 1 of 5 Carry out acceptance and maintenance tests on distance protection relays Level 5 Credits 4 Purpose People credited with this unit standard are able to: prepare for acceptance and maintenance
More informationOutline New Zealand Greenshell mussel (kutai, kuku) farming
Outline New Zealand Greenshell mussel (kutai, kuku) farming 16337 version 3 Page 1 of 5 Level 2 Credits 10 Purpose People credited with this unit standard are able to: identify the Greenshell mussel; describe
More informationDemonstrate knowledge of vegetation fire behaviour
Page 1 of 5 Demonstrate knowledge of vegetation fire behaviour Level 5 Credits 8 Purpose This unit standard is for people with responsibilities for vegetation fire pre-suppression preparedness planning
More informationPlan and manage helicopter overhead lines operation
Page 1 of 5 Plan and manage helicopter overhead lines operation Level 5 Credits 10 Purpose People credited with this unit standard are able, for helicopter overhead lines operations, to: plan; organise
More informationNZQA Expiring unit standard 3885 version 8 Page 1 of 5. Demonstrate knowledge of and use an oxy-acetylene welding plant in the motor body industry
Page 1 of 5 Title Demonstrate knowledge of and use an oxy-acetylene welding plant in the motor body industry Level 2 Credits 4 Purpose This unit standard is for people who are at pre-employment level or
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Slice and package bread in a plant bakery Level 4 Credits 10 Purpose This unit standard is for people working or intending to work in a plant bakery as a baking tradesperson. People credited
More informationThis unit standard is expiring
Page 1 of 5 Title Prepare edible green bovine offal products for packaging Level 2 Credits 10 Purpose This entry level unit standard is for people who are employed in the offal department of meat processing
More informationNZQA registered unit standard version 6 Page 1 of 5. Operate biological treatment systems for effluent water in an energy and chemical plant
Page 1 of 5 Title Operate biological treatment systems for effluent water in an energy and chemical plant Level 4 Credits 8 Purpose This unit standard is for people working as boiler operators and energy
More informationSECURITY STAFF SERVICES Demonstrate knowledge of protective. Security
1 of 6 level: 3 credit: 7 planned review date: March 2007 sub-field: purpose: Security This unit standard is for people who work or intend to work in. People credited with this unit standard are able to:
More informationNZQA registered unit standard version 3 Page 1 of 5. Install high voltage (HV) electricity network overhead conductors
Page 1 of 5 Title Install high voltage (HV) electricity network overhead conductors Level 4 Credits 8 Purpose People credited with this unit standard are able to: interpret scope of work for installing
More informationDemonstrate and apply knowledge of leading a security team
Demonstrate and apply knowledge of leading a security team 25627 version 1 Page 1 of 7 Level 4 Credits 15 Purpose This unit standard is for security team leaders who are required to lead a team in a security
More informationNATIONAL CERTIFICATE in 1 of 5
NATIONAL CERTIFICATE in 1 of 5 level of qualification: 4 credit total: 135 level 3 credits: 26 level 4 credits: 77 level 5 credits: 32 registration date: 24 July 2001 planned review date: 31 July 2005
More informationMaximise timber recovery
Page 1 of 6 Maximise timber recovery Level 5 Credits 25 Purpose People credited with this unit standard are able to: manage safety when maximising timber recovery; compare log supply with log specification;
More informationUse advanced felling techniques in arboriculture
Page 1 of 5 Use advanced felling techniques in arboriculture Level 4 Credits 10 Purpose This unit standard is for people wishing to extend their tree felling skills in an arboriculture situation. People
More informationCarry out routine inspection and servicing on high voltage bulk oil circuit breakers
Page 1 of 6 Carry out routine inspection and servicing on high voltage bulk oil circuit breakers Level 4 Credits 6 Purpose People credited with this unit standard are able to: prepare for inspection, testing
More informationNZQA registered unit standard 9506 version 5 Page 1 of 5. Conduct a sample analysis in a petrochemical laboratory
Page 1 of 5 Title Conduct a sample analysis in a petrochemical laboratory Level 4 Credits 6 Purpose This unit standard is for people employed in the petrochemical industry. People credited with this unit
More informationThis qualification is expiring. The last date to meet the requirements is 31 December 2010.
NQF Ref 0140 Version 4 Page 1 of 8 National Certificate in Energy and Chemical Plant (Process Operation) (Level 2) with optional strands in Steam Generation, Ancillary Operations, Geothermal, Waste Treatment,
More informationManage electricity generation dispatch
Page 1 of 6 Manage electricity generation dispatch Level 6 Credits 10 Purpose People credited with this unit standard are able to: demonstrate knowledge of principles of power system operation; identify
More informationNZQA registered unit standard version 3 Page 1 of 5
Page 1 of 5 Title Demonstrate and apply knowledge of safe welding principles and quality assurance under supervision Level 2 Credits 4 Purpose This unit standard is for the training of mechanical engineering
More informationNZQA registered unit standard version 1 Page 1 of 5. Identify and inspect road safety barrier systems on Infrastructure Works sites
Page 1 of 5 Title Identify and inspect road safety barrier systems on Infrastructure Works sites Level 4 Credits 10 Purpose People credited with this unit standard are able to: identify and explain road
More informationOperate hydro-electric station auxiliary plant
Page 1 of 6 Operate hydro-electric station auxiliary plant Level 4 Credits 8 Purpose People credited with this unit standard are able to: demonstrate knowledge of the principles of electricity generation
More informationNZQA registered unit standard version 2 Page 1 of 5
Page 1 of 5 Title Assess the optimisation of a drinking-water treatment plant, and describe critical control points Level 5 Credits 10 Purpose People credited with this unit standard are able to: assess
More informationNZQA registered unit standard version 4 Page 1 of 5
Page 1 of 5 Title Operate systems for boiler feedwater treatment Level 4 Credits 15 Purpose This unit standard is for people working as boiler operators and energy and chemical process operators in an
More informationNZQA registered unit standard version 1 Page 1 of 5. Develop, implement and review a HACCP application for a food processing operation
Page 1 of 5 Title Develop, implement and review a HACCP application for a food processing operation Level 5 Credits 20 Purpose This unit standard is for experienced people required to have in-depth knowledge
More informationNZQA registered unit standard 5555 version 6 Page 1 of 5
Page 1 of 5 Title Arrange and manage a visitor conference Level 5 Credits 20 Purpose People credited with this unit standard are able to: plan operations for a visitor conference; manage monetary, human
More informationCarry out routine inspection and service on high voltage indoor metal clad circuit breakers and bus
Page 1 of 7 Carry out routine inspection and service on high voltage indoor metal clad circuit breakers and bus Level 4 Credits 4 Purpose People credited with this unit standard are able to: prepare for
More informationConfirm log grades and scale logs
Page 1 of 5 Confirm log grades and scale logs Level 3 Credits 10 Purpose People credited with this unit standard are able to: manage hazards associated with confirming log grades and scaling logs; demonstrate
More informationNational Certificate in Energy and Chemical Plant (Boiler Operation) (Level 2)
NZQF NQ Ref 1342 Version 2 Page 1 of 5 National Certificate in Energy and Chemical Plant (Boiler Operation) (Level 2) Level 2 Credits 42 This qualification has been reviewed. The last date to meet the
More informationThis qualification is expiring. The last date to meet the requirements is 31 December 2009.
NQF Ref 1073 Version 4 Page 1 of 18 National Certificate in Materials Processing (Level 2) with strands in General, Plastics Injection Moulding, Plastics Extrusion, Plastics Blow Moulding, Plastics Pressure
More informationProvide career consultation to career consultation clients
Page 1 of 5 Provide career consultation to career consultation clients Level 5 Credits 20 Purpose People credited with this unit standard are able to: establish rapport with clients in the career consultation
More informationPRINTING - SCREEN Make ready and print single colour for flat sheet screen printing
1 of 8 level: 3 credit: 40 planned review date: March 2009 sub-field: Printing replacement information: This unit standard, unit standard 5139, unit standard 5140, unit standard 5141, unit standard 5142,
More informationIRRIGATION Demonstrate knowledge of irrigation systems, components, and performance
1 of 5 level: 4 credit: 6 planned review date: August 2006 sub-field: purpose: entry information: accreditation option: moderation option: Water Industry People credited with this unit standard are able
More informationNZQA registered unit standard version 3 Page 1 of 5. Infrastructure Works > Civil Plant Operation
Page 1 of 5 Title Operate a motor grader for earthworks Level 3 Credits 20 Purpose People credited with this unit standard are able to: prepare for grader operations; manoeuvre and control grader on site;
More informationNational Certificate in Petrochemical Industry (Core) (Level 2)
NQF Ref 0977 Version 3 Page 1 of 6 National Certificate in Petrochemical Industry (Core) (Level 2) Level 2 Credits 65 This qualification is expiring. The last date to meet the requirements is 31 December
More informationThis qualification is expiring. The last date to meet the requirements is 31 December 2010.
NQF Ref 0141 Version 5 Page 1 of 8 National Certificate in Energy and Chemical Plant (Process Operation) (Level 4) with optional strands in Refrigeration, Steam Generation, Ancillary Operations, Geothermal,
More information