CE Marking A short guide to what you need to know about CE Marking
|
|
- Sabrina Robbins
- 6 years ago
- Views:
Transcription
1 CE Marking A short guide to what you need to know about CE Marking Alastair McLaughlin Product Safety Specialist Slide 1 Who Am I? Name Title: Employer: Alastair McLaughlin Product Safety Specialist Experience: History: Telephone: years experience in Compliance Management and Consumer Product Testing Worked for suppliers to WH Smith and Woolworths, Radica Games, Mattel, Alastair.McLaughlin@tuv-sud.co.uk Slide 2 Contents CE marking and your legal obligations What is CE marking? What are EU Directives? Who is responsible for CE marking? What is Due Diligence? How is CE marking enforced? Applying directives How to identify which Directives apply Scope and exemptions EMC, LVD, RoHS, RTTE Slide 3 1
2 Contents Applying directives, continued Routes to conformity Essential Requirements Harmonised standards Technical documentation required to demonstrate compliance Declaration of Conformity Technical File Contents Technical File Compilation Placing a product on the market Summary Questions and answers Slide 4 What is CE Marking? Slide 5 CE Conformity Marking The CE conformity marking shall consist of the initials CE taking the following form: If the CE marking is reduced or enlarged the proportions given in the above graduated drawing must be respected. The various components of the CE marking must have substantially the same vertical dimension, which may not be less than 5 mm. Slide 6 2
3 What is CE Marking Designed to enable free trade around European Union (EU) member States (note: some non EU countries have adopted CE marking procedures) Places responsibility with the manufacturer or importer of goods, whoever places the equipment on the market Relates to EU Directives (European Law) designed to ensure quality on the market place Primarily self certification Not evidence of compliance in itself Slide 7 What Are EU Directives? Slide 8 What are EU Directives? "New Approach" Directives set out the essential requirements, written in general terms, which must be met before products may be sold in the European Community. European harmonised standards provide the detailed technical information to meet the essential requirements. The directives also explain how manufacturers are able to demonstrate conformity with the essential requirements. Products which meet the essential requirements must display the CE marking. The CE marking means that the products can be sold anywhere in the Community / European Economic Area (EEA). Slide 9 3
4 CE Marking Directives There are 20+ Directives that require CE Marking: Active implantable medical devices Appliances burning gaseous fuels Cableway installations designed to carry persons Eco-design of energy related products Electromagnetic compatibility Equipment and protective systems intended for use potentially explosive atmospheres Explosives for civil uses Hot-water boilers In vitro diagnostic medical devices Lifts Low Voltage Devices.. Slide 10 CE Marking Directives Machinery Measuring Instruments Medical devices Noise emission in the environment Non-automatic weighing instruments Personal protective equipment Pressure equipment Pyrotechnics Radio and telecommunications terminal equipment Recreational craft Safety of toys Simple pressure vessels Slide 11 Responsibilities of Legal Operators Slide 12 4
5 Responsibilities Manufacturer You are the manufacturer if the product is marketed under your brand name, if you have the product made on your behalf, or if you make the product yourself. Responsibilities 1. Identify the applicable directive(s) Check the scope and exemptions of likely directives 2. Consult a Notified Body? Not all CE marking directives require an NB 3. Identify the directives requirements 4. Check conformity to those requirements Harmonised standards provide a presumption of conformity 5. Compile the technical file Issue a Declaration of Conformity 6. Apply the CE marking Slide 13 Responsibilities Importer When goods are produced in third countries and the manufacturer is not represented in the EEA, importers must make sure that the products they place on the market comply with the applicable requirements and do not present a risk to the European public. The importer has to verify that the manufacturer outside the EU has taken the necessary steps and that the documentation is available upon request. Request written assurance that a D of C and technical documentation will be made available Ensure the manufacturer is continually contactable Importer as the manufacturer If you market the products under your own name, you take over the manufacturer s responsibilities. Slide 14 Responsibilities Distributor Distributors must act with due care to ensure that their handling of the product does not adversely affect its compliance. Must have sufficient knowledge to determine which products require CE marking and what documentation should accompany such products Must have an affirmation from the manufacturer or importer that the product meets the CE marking directives requirements Must be able to assist authorities in obtaining documentation from the manufacturer or importer Distributor as the manufacturer If you market the products under your own name, you take over the manufacturer s responsibilities. Slide 15 5
6 How is CE Marking Enforced? Slide 16 Legal Status of Directives Directives are agreed, adopted & accepted by the governments of the member states into national law. The Directives are transposed into UK Law as Statutory Instruments. This gives the Directives the same status as other laws in this country. Directive 2011/65/EU RoHS Directive 2006/95/EC Low Voltage Directive 2004/108/EC EMC Directive 1999/5/EC RTTE Directive UK Law (Recast regulations to be published November 2012) The Electrical Equipment (Safety) Regulations 1994 (SI 1994/3260) EMC Regulations 2006 (SI 2006/3418) The Radio Equipment and Telecommunications Terminal Equipment Regulations 2000 (SI 2000 No.730) Slide 17 Who Enforces the Law? Enforcement varies by directive: Health and Safety Executive (for machinery, pressure vessels, ATEX, etc) Local trading standards departments within their region (consumer products) MRHA (for medical devices) The Office of Communications (Ofcom) (for protection and management of the radio spectrum) National Measurement Office (RoHS) Slide 18 6
7 Market Surveillance The enforcement authority can:- Challenge any product on the Market Pull samples from the Market for examination Request a manufacturer, importer or retailer to provide their Technical file Enlist the assistance of 3 rd Party Laboratories to test or check products Respond to public complaint Notify other member states Instigate legal proceedings resulting in potential:- Banning of a product from sale Ordering a product recall Payment of fines Imprisonment of responsible persons Slide 19 What is Due Diligence? Slide 20 What is Due Diligence? Knowing what is required. Demonstrating compliance with relevant applicable Directives. Declaring that you have met the relevant requirements. Being properly prepared. Ready to defend yourself in court. Being able to produce a technical file. Being confident in your safety case. Slide 21 7
8 Applying Directives Slide 22 Scope & Exemptions - EMC Electromagnetic Compatibility Scope: Applies to all electrical and electronic apparatus which are liable to cause electromagnetic disturbance or the performance of which is liable to be affected by such disturbance. Exemptions: Equipment covered by Directive 1999/5/EC on Radio and telecommunications terminal equipment (R&TTE) Aeronautical products as referred to in Regulation (EC) No1592/2002 Radio equipment used by radio amateurs Benign equipment Slide 23 Essential requirements - EMC Equipment shall be designed and manufactured to ensure that: The electromagnetic disturbance it generates does not exceed a level above which radio and telecommunications equipment or other equipment cannot operate as intended; It has a level of immunity to the electromagnetic disturbance to be expected in its intended use which allows it to operate without unacceptable degradation of its intended use. Slide 24 8
9 Scope & Exemptions - LVD Low Voltage Directive Scope: Applies to all electrical equipment designed for use with a voltage rating of between Vac and Vdc. Exemptions: Electrical equipment for use in a potentially explosive atmosphere Electrical equipment for radiology and medical purposes Electrical parts for lifts Electricity meters Products which are covered by other Community directives Plugs and socket outlets for domestic use Electric fence controllers Specialised electrical equipment, for use on ships, aircraft or railways provided it complies with the safety provisions drawn up by international bodies in which the Member States participate - which so far are not covered by any Community directive and therefore must not be CE marked for LVD Slide 25 Essential requirements - LVD Products must: be marked with their rated characteristics. be clearly marked with the brand name or the trade mark. where that is not possible, on the packaging. be made in such a way as to ensure that it can be safely and properly assembled and connected. protect against hazards arising from the electrical equipment to ensure:- that persons and domestic animals are adequately protected against the danger of physical injury or other harm which might be caused by direct or indirect contact; that temperatures, arcs or radiation which would cause a danger, are not produced; that the insulation must be suitable for foreseeable conditions. Slide 26 Essential requirements - LVD Products must: Protect against hazards which may be caused by external influences on the electrical equipment to ensure: that the electrical equipment meets the expected mechanical requirements in such a way that persons, domestic animals and property are not endangered; that the electrical equipment shall be resistant to non-mechanical influences in expected environmental conditions, in such a way that persons, domestic animals and property are not endangered; that the electrical equipment shall not endanger persons, domestic animals and property in foreseeable conditions of overload. Slide 27 9
10 Scope & Exemptions - RoHS Restrictions of Hazardous Substances (Re-cast) Scope: Applies to all electrical equipment falling within the categories of Annex I of the Directive. Exemptions: Military equipment Equipment designed to be sent into space Equipment designed and installed as part of another type of equipment not within scope Large-scale stationary industrial tools Large-scale fixed installations The means of transport Non-road mobile machinery for professional use Active implantable medical devices Photovoltaic panels R&D equipment only available on B to B basis Slide 28 Scope & Exemptions - RoHS RoHS - Specific technical exemptions Some restricted substances in certain applications cannot be replaced by alternate materials these have specific exemptions. There are too many technical application exemptions to list in this short presentation. They re listed in Annex III together with the date from which they cease to be valid, if any. Slide 29 Essential requirements - RoHS The restricted substances must not be present in any homogeneous material of the equipment in concentrations above the specified limits Restricted substances: Lead, Pb (0.1%) Mercury, Hg (0.1%) Cadmium, Cd (0.01%) Hexavalent Chromium, Cr (VI) (0.1%) Polybrominated Biphenyls, PBB (0.1%) Polybrominated Diphenyl Ethers, PBDE (0.1%) NOTE: the restricted substances are to be reviewed by July 2014 Slide 30 10
11 Scope & Exemptions R&TTE Radio and Telecommunications Terminal Equipment Scope: Applies to all radio and telecommunication terminal equipment (with certain exclusions) as defined in the Directive. Exemptions: Amateur radio equipment not commercially available Radios used exclusively by the State for security purposes (see Note 1) Equipment within the scope of the Marine Equipment Directive (MED) Radios on display at trade exhibitions Broadcast sound and television receivers (excluding any line termination equipment such as set-top boxes) Cabling and wiring Note 1: The R&TTE-D specifically excludes military equipments, but this does not exempt those equipments from the requirements of CE marking where the EMC and Low Voltage Directives still apply. Slide 31 Essential requirements R&TTE Health & Safety (as required by 2006/95/EC (LVD) (includes any RF exposure requirements) EMC (as required by 2004/108/EC (EMC-D)) Efficient use of the spectrum Radio equipment shall be so constructed that it uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference. Slide 32 Proof of compliance How do you show compliance? Can be through: - testing - design Must explain HOW the measures show compliance - Harmonised standards (more later) give presumption of conformity - Other standards should be accompanied by rationale to show how those tests meet the directive requirements - Design (use of 3 rd -party approved components, layout and materials designed to meet directive requirements) will often need to be backed up by tests; for example: heating tests, fault tests Slide 33 11
12 Harmonised Standards Slide 34 What are Harmonised Standards? A "Harmonised Standard" is a standard that: Supports one or more Directives Has been produced by CEN or CENELEC Has been published in the Official Journal of the EC (OJ) At least one national standards body has published it Provides a presumption of conformity with the Essential Requirements These standards, produced under a mandate from Member States through the Commission, provide the technical measures to meet the Essential Requirements. Slide 35 What are Harmonised Standards? Directives state the legal objectives (Essential Requirements) to be met (*1) Harmonised Standards identify the technical means to meet these legal objectives. Harmonised Standards are one way of meeting the Essential Requirements, and are never intended to be mandatory however, Compliance with harmonised standards gives a presumption of conformity *1 The EHSRs of the Machinery Directive do contain technical requirements. Slide 36 12
13 What are Technical Files? Slide 37 Technical Files Your technical file is your documented evidence to show that the product properly complies with the requirements of the directives which apply to it. Slide 38 Technical Files Technical documentation must be such as to enable enforcement authorities to assess the conformity of the product to the requirements of the directives. It must cover the design, manufacture and operation of equipment. It can be the same document as your design file for the equipment. Most importantly, it forms the basis of your compliance case! Slide 39 13
14 Technical File Contents A general description of the equipment This requirement can normally be met by the description (including model number etc.) found in the equipment manual. Conceptual design This can be met by a general assembly drawing and / or photographs plus a block diagram. The drawings should relate to a particular model number and year of manufacture. Circuit diagrams are also required. Slide 40 Technical File Contents Technical File Contents Descriptions and explanations necessary for the understanding of the drawings and schemes referred to previously and the operation of the electrical equipment. Your equipment manual may meet this requirement - but it may be necessary to include a schematic operation description. A list of the standards applied in full (or in part), and descriptions of the solutions adopted to satisfy the safety requirements of the Regulations / Directive where standards have not been applied. If no standards have been applied references should be made as to how the safety requirements have been satisfied. List of Components. complete listing of all components, materials and parts used in the product (i.e.: complete bill of materials) Safety approval information on critical components and materials Slide 41 Technical File Contents Results of design calculations made, examinations carried out, etc. In many cases test reports will meet this requirement if they can demonstrate that the design calculations have been made correctly. Test reports. This could include test reports drawn up by the manufacturer, a notified body or any other person the manufacturer considers to be competent. These reports will demonstrate how the product complies with the relevant directives. Typically this will be by the application of harmonised standards. A copy of the EC Declaration of Conformity. Slide 42 14
15 Format of Technical File Must contain all the required information. Can be a traditional paper file Information may be stored electronically Hyperlinks can be used to link documents Needs to be backed up Be easy to produce all documentation on short notice Be easy to maintain and keep up to date You can t just do it then forget about it! Slide 43 Declaration of Conformity (DoC) Slide 44 What is a Declaration of Conformity (DoC)? 1. A formal statement that the product complies with: Applicable Directives Applicable Standards 2. Signed by responsible person within the organisation (e.g. company director) 3. It is not evidence of compliance in itself 4. Minimum legal requirement Slide 45 15
16 The DoC must include The name and address of the manufacturer or their authorised representative A description of the product including type, model and any other information that clearly relates the equipment to the Declaration. A reference to the standards applied harmonised standards that have been applied and when harmonised standards have not been applied, references to International or National standard(s) with which conformity is declared. If standards have not been applied, reference should be made to other specifications adopted or to the safety objectives that have been applied and satisfied. Identification of the signatory must be someone empowered to enter into commitments on behalf of the manufacturer (or their authorised representative). The last two digits of the year in which CE marking was affixed. Slide 46 Placing on the Market & Putting Into Service Slide 47 Placing on the Market / into Service A product must comply with the applicable CE marking directives when it is placed on the market for the first time and put into service Placing on the market is the initial action of making a product available for the first time on the Community market, with a view to distribution or use in the Community. Making available can be either for payment or free of charge Without need for further processing (packaging, labelling, etc) Putting into service takes place at the moment of first use within the Community by the end user. However, market surveillance is only carried out on products: Which can only be used after assembly or installation Which could be negatively influenced by transport and storage Which are not first placed on the market prior to putting into service (e.g. manufactured for own use) Slide 48 16
17 Placing on the Market / into Service Before a product is placed on the market / into service, the following must happen: The manufacturer must put together technical documentation which makes it possible to assess whether the product complies with the relevant Directives The manufacturer or the authorised representative must draw up a declaration of conformity. The manufacturer or the authorised representative must affix the CE marking Summary What is CE Marking? EU Directives Scope and Exemptions Essential Requirements Harmonised standards Technical files Declaration of Conformity (DoC) Placing products on the market Thanks for Listening. Any Questions? 17
Technical Files for RoHS Directive 2011/65/EU. Vinay Goyal
Technical Files for RoHS Directive 2011/65/EU Vinay Goyal 1 Disclaimer This presentation has nothing to with my current employer and its internal practices I will try to avoid sharing names and internal
More informationThe Top 5 Mistakes in Making a Declaration of Conformity for CE Marking
Intertek Cleeve Road, Leatherhead, Surrey KT22 7SB UK info.uk@intertek.com 01372 370900 www.intertek.com Contents Introduction... 2 The top 5 mistakes in making a Declaration of Conformity... 3 1. Not
More informationThe New Low Voltage Directive 2014/35/EU: An Overview
Directive 2014/35/EU: An Intertek Cleeve Road, Leatherhead, Surrey KT22 7SB UK info.uk@intertek.com 01372 370900 www.intertek.com Introduction... 2... 3 The scope of the LVD Directive... 3 Exclusions from
More informationCE marking is regarded as a passport for products to enter and circulate freely within the 30 counties forming part of the EEA.
CE Marking Services What is CE Marking? Many products that are placed on the single market in the European Economic Area (EEA) (28 EU countries, together with Iceland, Liechtenstein and Norway) contain
More informationEuropean Machinery Directive 2006/42/EC & Related Directives
European Machinery Directive 2006/42/EC & Related Directives Applicability to Sun Hydraulics products The information below is intended to give readers a short, practical summary of some of the CE regulations
More informationRadio Equipment Directive
Radio Equipment Directive MRA Workshop March 2015 Presented by: Japan Jan Coenraads Secretary of R&TTECA (REDCA) jan.coenraads@brynyago.com jan.coenraads 1 Presentation Content This presentation will cover:
More informationAvv. Maurizio Iorio (Attorney at Law) 2013
The new RoHS Directive 2011/65/EU: interpretation and application problems for who produces and/or markets electrical and electronic equipment, or similar products, in Italy Avv. Maurizio Iorio (Attorney
More informationDRAFT GUIDANCE DOCUMENT ON THE LOW VOLTAGE DIRECTIVE TRANSITION
EUROPEAN COMMISSION Ref. Ares(2015)4308055-15/10/2015 Directorate-General for Internal Market, Industry, Entrepreneurship and SMEs Industrial Transformation and Advanced Value Chains Advanced Engineering
More informationDeclaration of Conformity
Declaration of Conformity DS2 Automated ELISA System Name and Address of Manufacturer: Name and Address of the Authorized European Representative: DYNEX Technologies, Inc. Sullyfield Circle Chantilly,
More informationUnderstanding the EU Environmental
Understanding the EU Environmental Directives --RoHS (Restriction of Hazardous Substances) --WEEE (Waste of Electrical and Electronic Equipment) --EuP (EcoDesign Requirements for Energy Using Products)
More informationThe New EU RoHS Directive: Key Topics Under Review
: Key Topics Under Review Written By: James Calder, Manager Global Services July 6, 2010 Intertek 100-505 March Road, Kanata, ON K2K 3A4 rohs@intertek.com +1 613.599.4321 www.intertek.com/rohs Table of
More informationThis document is meant purely as a documentation tool and the institutions do not assume any liability for its contents
2011L0065 EN 24.06.2015 005.001 1 This document is meant purely as a documentation tool and the institutions do not assume any liability for its contents B DIRECTIVE 2011/65/EU OF THE EUROPEAN PARLIAMENT
More informationManufacturers will not need EMC or conformity assessments but will need to illustrate the
EMC Directive 2004/108/EC: Implications for Manufacturers Kenneth L. Boston, PE, NCE January 2011 As of July 2007, 2004/108/EEC replaced the previous standard, which required manufacturers to create a
More informationNATIONAL MARKET SURVEILLANCE PROGRAMME 2018 Iceland
NATIONAL MARKET SURVEILLANCE PROGRAMME 2018 Iceland Reykjavík January 2018 1 Contents 1. GENERAL MARKET SURVEILLANCE ORGANISATION AND INFRASTRUCTURE... 1 1.1. Identification and responsibilities of national
More informationExtended Producer Responsibility (in the EEE* industry)
Extended Producer Responsibility (in the EEE* industry) * EEE = Electric and Electronic Equipment Producer responsibility Producer responsibility is the act of making the 'producer of a product' responsible
More informationMicrogeneration Installation Standard: MCS 002. Information on Building Regulations and European Directives Issues 1.3
Microgeneration Installation Standard: MCS 002 Information on Building Regulations and European Directives Issues 1.3 This Microgeneration Installation Standard is the property of Department of Energy
More informationRESTRICTION OF THE USE OF CERTAIN HAZARDOUS SUBSTANCES (ROHS) DIRECTIVE (2011/65/EU)
RESTRICTION OF THE USE OF CERTAIN HAZARDOUS SUBSTANCES (ROHS) DIRECTIVE (2011/65/EU) Try it for free on: https://ce-marking.help This Free of Charge application was designed to help manufacturers, consultants,
More informationWashington Laboratories, Ltd
PRODUCT BASED ENVIRONMENTAL REGULATIONS ALERT Waste Electrical and Electronic Equipment (WEEE) Directive now in effect. Restriction of Hazardous Substances (RoHS) Directive becomes effective July 1, 2006
More informationPosition Paper on the RoHS Directive / Electrical Material Decree
Date: April 27, 2017 Version 1.0-:E Revision History Document number Version and revision type 1 ) Comments Author -:E 1.0 A First version Peter Simon 1 ) A: Revision due to inaccurate documentation or
More informationProduct Regulatory Compliance Datasheet SWG 8450
Product Regulatory Compliance Datasheet SWG 8450 TABLE OF CONTENTS I. GLOBAL ENVIRONMENTAL INFORMATION...1 II. SYSTEM DIMENSION AND WEIGHT...1 III. BATTERIES....2 IV. POWER CORDS AND USER DOCUMENTATION.....2
More informationEUROPEAN UNION. Brussels, 22 March 2011 (OR. en) 2008/0240 (COD) PE-CONS 62/10 ENV 835 MI 525 CODEC 1456
EUROPEAN UNION THE EUROPEAN PARLIAMT THE COUNCIL Brussels, 22 March 2011 (OR. en) 2008/0240 (COD) PE-CONS 62/10 V 835 MI 525 CODEC 1456 LEGISLATIVE ACTS AND OTHER INSTRUMTS Subject: DIRECTIVE OF THE EUROPEAN
More informationTransitioning from RoHS to RoHS2:
Transitioning from RoHS to RoHS2: The current state of RoHS in the Electronics Industry A SiliconExpert White Paper exploring the transition from the European RoHS Directive to the RoHS2 Directive and
More informationR&TTE CA R&TTE Compliance Association TGN 01
R&TTE CA R&TTE Compliance Association TGN 01 Version May 2013 Technical Guidance Note on the R&TTED compliance requirements for a Radio Module and the Final Product that integrates a Radio Module 1. Introduction
More informationCOUNCIL OF THE EUROPEAN UNION. Brussels, 14 December /09 ADD 1. Interinstitutional File: 2008/0240 (COD) ENV 890 MI 464 CODEC 1445
COUNCIL OF THE EUROPEAN UNION Brussels, 14 December 2009 Interinstitutional File: 2008/0240 (COD) 17433/09 ADD 1 V 890 MI 464 CODEC 1445 ADDDUM TO NOTE Subject: DIRECTIVE OF THE EUROPEAN PARLIAMT AND OF
More informationANEC position paper on the revision of the Low Voltage Directive (73/23/EEC)
ANEC position paper on the revision of the Low Voltage Directive (73/23/EEC) Executive summary The Low Voltage Directive (LVD) has been in force for many years and has generally worked well in providing
More informationEU Legislation relevant to recreational boating
EU Legislation relevant to recreational boating Introduction The following seven sections list EU legislation that may directly or indirectly impact on recreational boating. Each section deals with a particular
More informationEU Environmental Compliance:
American Society for Quality Southern California Quality Conference EU Environmental Compliance: An Overview of RoHS and REACH Irvine, California Randy Flinders Sr. Manager of Support GreenSoft Technology,
More informationProposal for amendment to the legal inspection regulation for electrical products
Proposal for amendment to the legal inspection regulation for electrical products By the Bureau of Standards, Metrology and Inspection (BSMI), Ministry of Economic Affairs (MOEA) Introduction: In order
More informationOverview of the Machinery Directive (2006/42/EC)
Intertek Cleeve Road, Leatherhead, Surrey KT22 7SB UK info.uk@intertek.com 01372 370900 www.uk.intertek-etlsemko.com Index Index... 1 Brief history & context of the Directive... 2 Overview: The Machinery...
More informationNATIONAL MARKET SURVEILLANCE PROGRAMME 2015 Spain Consumer affairs
Ref. Ares(2015)2904523-10/07/2015 Template for drafting a national market surveillance programme pursuant to Article 18(5) of Regulation (EC) No 765/2008 NATIONAL MARKET SURVEILLANCE PROGRAMME 2015 Spain
More informationInformation leaflet on coming up changes in the European Pressure Equipment Directive (PED) 1 Introduction to new PED 2014/68/EU
Information leaflet on coming up changes in the European Pressure Equipment Directive (PED) 1 Introduction to new PED 2014/68/EU The Pressure Equipment Directive (PED 97/23/EC) has been in place since
More informationCOMMISSION DELEGATED DIRECTIVE (EU).../ of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2015) XXX draft COMMISSION DELEGATED DIRECTIVE (EU).../ of XXX amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the
More informationEquipment Certification and Importation Procedures Authentication of certificates and ensuring that approval requirements are met
Equipment Certification and Importation Procedures Authentication of certificates and ensuring that approval requirements are met Keith Mainwaring Ukrainian National Information Systems (UNIS) Tunis, 9
More informationEquipment Certification and Importation Procedures Authentication of certificates and ensuring that approval requirements are met
Equipment Certification and Importation Procedures Authentication of certificates and ensuring that approval requirements are met Keith Mainwaring Ukrainian National Information Systems (UNIS) Trinidad
More informationPosition paper on the Restriction of Hazardous Substances in Electrical and Electronic Equipment (RoHS Directive / ElektroStoffV)
Valves Position paper on the Restriction of Hazardous Substances in Electrical and Electronic Equipment (RoHS Directive / ElektroStoffV) Consequences for the building valves industry Last update: 08.01.2016
More informationTUV SUD BABT PRODUCTION QUALITY CERTIFICATION SCHEME
TUV SUD BABT PRODUCTION QUALITY CERTIFICATION SCHEME Copyright TUV SUD BABT 2017 A Certification Body of: Page 1 of 33 Contents AMENDMENT RECORD 3 0. INTRODUCTION 3 1. PRE-CONDITIONS TO SUPPORT PRODUCTION
More informationClassification System for Inspections
Wilton Park House, Wilton Place, Dublin 2, Ireland Tel +353 1 607 3003 Fax +353 1 607 3109 E-mail inab@inab.ie Web www.inab.ie Classification System for Inspections TABLE OF CONTENTS FOREWORD. 2 1. INSPECTION
More informationConformity Risk Assessment To Comply With RE Directive 2014/53/EU
Product name: Model: Conformity Risk Assessment (1) The following requirements are mentioned in Annex Ⅱ of RE (Radio Equipment) Directive 2014/53/EU. ANNEXⅡ CONFORMITY ASSESSMENT MODULE A INTERNAL PRODUCTION
More informationMadison Thermoset Conference Madison, WI October 23 rd, 2008
Madison Thermoset Conference Madison, WI October 23 rd, 2008 Environmental Mandates Impact on OEM s / Products RoHS / WEEE Aspects OEM Recognition of RoHS / WEEE Directives Applications Impacted Path Forward
More informationWHITE PAPER RADIO EQUIPMENT DIRECTIVE 2014/53/EU: AN OVERVIEW
WHITE PAPER RADIO EQUIPMENT DIRECTIVE 2014/53/EU: AN OVERVIEW CONTENTS Introduction 3 Radio Equipment Directive (RED) 2014/53/EU 4 Scope 5 Changes summary 5 The routes to compliance 6 Responsibilities
More informationTechnical Guidance Note on Requirements for a Final Product that Integrates an R&TTE Directive Assessed Module
R&TTE CA R&TTE Compliance Association TGN 01 Rev 5 Technical Guidance Note on Requirements for a Final Product that Integrates an R&TTE Directive Assessed Module 1. Introduction Under the R&TTE Directive,
More information2.2.2 GUIDE TO THE IMPLEMENTATION OF DIRECTIVES BASED ON THE NEW APPROACH AND THE GLOBAL APPROACH
2.2.2 GUIDE TO THE IMPLEMENTATION OF DIRECTIVES BASED ON THE NEW APPROACH AND THE GLOBAL APPROACH The CE marking on a product indicates that it complies with all relevant directives. The socalled new approach
More informationBABT Production Scheme 340
BABT Production Scheme 340 The Production Quality Certification Scheme for Manufacturers of Marine, Radio, Telecommunication Terminal Equipment and Electro- Technology Products BABT is the telecommunications
More informationConformity assessment procedures for Radio Equipment Directive Scheme
Conformity assessment procedures for Radio Equipment Directive Scheme This guide describes the certification services of Telefication for manufacturers and importers to realise that their radio equipment
More informationThe Restriction of Hazardous Substances in electrical & electronic equipment (RoHS) Directive
The Restriction of Hazardous Substances in electrical & electronic equipment (RoHS) Directive presented by Steve Andrews UK Department of Trade & Industry Outline 1. Introduction the role of the DTI 2.
More informationMaskinsikkerhed ApS. Consulting engineers. Background. Consulting engineers
Maskinsikkerhed ApS Consulting engineers 1 Consulting engineers - Risk assesment - Safety solutions - Documentation - Purchase of safe machinery - ATEX - Pressure equipment - Low Voltage directive - Training
More informationAPPLICATION PACK FOR THE ECOLABEL
APPLICATION PACK FOR THE ECOLABEL Application form for televisions (ecolabelling criteria 12 March 2009) Page 1 of 17 Insert name and contact details of the Member State Competent Body(s) You can see which
More informationSunnyCor, Inc. Plan for RoHS Directive 2011/65/EU Compliance
SunnyCor, Inc. Plan for RoHS Directive 2011/65/EU Compliance The European Union (EU) has established Directives that restrict the use of certain hazardous substances in electrical and electronic (EEE)
More informationBy the Bureau of Standards, Metrology and Inspection (BSMI), Ministry of Economic Affairs MOEA
Proposal for extension of inspection scope of network media players and projectors and requiring marking of presence conditions of restricted substances By the Bureau of Standards, Metrology and Inspection
More informationEL652. Vending Machines [EL /3/ ]
EL652. Vending Machines [EL652-2001/3/2009-72] 1. Scope The criteria shall apply to vending machines that sell sold and hot beverages (coffee, canned or bottled beverage or combination of these) for coins,
More informationSubject: China RoHS Presented By: Homi Ahmadi Venue: IEEE- PSES-Orange County, CA Date: January 2008
Subject: China RoHS Presented By: Homi Ahmadi Venue: IEEE- PSES-Orange County, CA Date: January 2008 Background Official title: Management Methods for the Prevention and Control of Pollutants from Electronic
More informationGUIDANCE NOTES FOR MANUFACTURERS OF CLASS I MEDICAL DEVICES
MDEG - 2007-12 - II-3.3 MSOGClassIGuidance_Final GUIDANCE NOTES FOR MANUFACTURERS OF CLASS I MEDICAL DEVICES Foreword These guidance notes do not aim to be a definite interpretation of National Laws and/or
More informationMarking of Conformity Assessment
Marking of Conformity Assessment R T 3521 003XY1234 AC111234003 MIC MRA International Workshop 30 th March 2012 Jan Coenraads Jan.coenraads@brynyago.com Comparison of Conformity Assessment Radio Act, Telecom
More informationL 96/26 EN Official Journal of the European Union. REGULATION (EC) No 552/2004 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL.
L 96/26 EN Official Journal of the European Union REGULATION (EC) No 552/2004 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 10 March 2004 on the interoperability of the European Air Traffic Management
More informationCOMMISSION DELEGATED DIRECTIVE../ /EU. of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2014) XXX draft COMMISSION DELEGATED DIRECTIVE../ /EU of XXX amending, for the purposes of adapting to technical progress, Annex III to Directive 2011/65/EU of the
More informationNormative Document on Enterprise Declaration of Conformity on the Pollution Control of Electrical and Electronic Products
Normative Document on Enterprise Declaration of Conformity on the Pollution Control of Electrical and Electronic Products Ministry of Industry and Information Technology May 2012 Page 1 of 8 Normative
More informationCOMMISSION DELEGATED DIRECTIVE../ /EU. of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2015) XXX draft COMMISSION DELEGATED DIRECTIVE../ /EU of XXX amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the
More informationAn Introduction to the Directive 2014/31/EU The new NAWI Directive
An Introduction to the Directive 2014/31/EU The new NAWI Directive Ian Turner TECHNICAL OFFICER FOR THE UKWF Introduction The Directive is a recast of 2009/23/EU Reflects the concepts of the New Legislative
More informationGUIDELINES ON SAFETY REQUIREMENTS FOR PURCHASE, RECEIPT, DONATION AND SUPPLY OF WORK EQUIPMENT
GUIDELINES ON SAFETY REQUIREMENTS FOR PURCHASE, RECEIPT, DONATION AND SUPPLY OF WORK EQUIPMENT HEALTH & SAFETY UNIT AUTUMN 2006 CONTENTS INTRODUCTION...2 WORK EQUIPMENT SAFETY CHECKLIST...3 EQUIPMENT SAFETY
More informationCOMMISSION DELEGATED DIRECTIVE (EU).../ of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2018) XXX draft COMMISSION DELEGATED DIRECTIVE (EU).../ of XXX amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive
More informationGuide to the in-vitro diagnostic medical devices legislation
Guide to the in-vitro diagnostic medical devices legislation Item Type Other Authors Irish Medicines Board (IMB) Publisher Irish Medicines Board (IMB) Download date 17/10/2018 04:46:25 Link to Item http://hdl.handle.net/10147/97003
More informationDIRECTIVE 2006/42/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
2006L0042 EN 20.04.2016 004.001 1 This document is meant purely as a documentation tool and the institutions do not assume any liability for its contents B DIRECTIVE 2006/42/EC OF THE EUROPEAN PARLIAMENT
More informationAPPLICATION PACK FOR THE ECOLABEL. PART 2: Application form for heat pumps. Final draft. November 2007
Final draft APPLICATION PACK FOR THE ECOLABEL PART 2: Application form for heat pumps November 2007 Please fill out: [Insert name of Competent Body and contact details, including address, telephone and
More informationWelding Machines for shipboard use
Welding Machines for shipboard use By Leif Andersen, Technical Product Manager Welding, WSS Every so often, we are asked what the difference is between Unitor welding machines and other brands. In this
More informationUnderstanding RoHS What it Means to U.S. Manufacturers
Understanding RoHS What it Means to U.S. Manufacturers With the Restriction of Hazardous Substances (RoHS) regulations scheduled to take effect in July 2006, there is ongoing concern regarding the readiness
More informationIECQ PUBLICATION QC IEC Quality Assessment System for Electronic Components (IECQ System)
QC 080000 Edition 3.0 2012-05 IECQ PUBLICATION IEC Quality Assessment System for Electronic Components (IECQ System) Hazardous Substance Process Management System Requirements (HSPM) QC 080000:2012(E)
More informationDesktop computer power profile settings of the Energy Star. Period of Inactivity System State program within the
Stone and the Environment As a company we are legally required to satisfy that our products are safe and that risk to the environment is minimised in line with EU regulations. However, at Stone we also
More informationChina RoHS an overview. Version 7 August zdeclaration. zrestriction. zdifferences to EU RoHS. zpackaging. Web:
China RoHS an overview Version 7 August 2009 Declaration Restriction Scope Packaging Differences to EU RoHS FAQs Web: www.global-legislation.com Q&A: glegislation@premierfarnell.com A Premier Farnell Company
More informationIntegrating Radio Modules: Europe: Page 5
Packet Includes: Basic EMC Conformity Assessment: Europe: Page 1 Integrating Radio Modules: Europe: Page 5 FCC Testing Requirements for your Product: Page 10 LS RESEARCH Basic EMC Conformity Assessment:
More informationTYPE APPROVAL GUIDELINES
TYPE APPROVAL GUIDELINES ELECTRONIC COMMUNCIATIONS EQUIPMENT MAY 26, 2015 NATIONAL COMMUNICATIONS AUTHORITY 1ST RANGOON CLOSE, POST OFFICE BOX PMB 1568, CANTONMENTS, ACCRA, GHANA DEFINITION OF TERMS...
More informationStatement of RoHS Exemption. In the Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003, Article 5 (b) states:
Statement of RoHS Exemption In the Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003, Article 5 (b) states: Any amendments which are necessary in order to adapt the
More informationBABT 807. A Guide to the Attestation of Equipment to the Machinery Directive by TUV SUD BABT. TUV SUD BABT is a Certification Body of
BABT 807 A Guide to the Attestation of Equipment to the Machinery Directive by TUV SUD BABT TUV SUD BABT is a Certification Body of TUV SUD BABT 2018 Issue: 2 Foreword TUV SUD BABT is the Certification
More informationGuidance note - A21. CE Marking Requirements
Guidance note - A21 Issue 1. June 2013 CE Marking Requirements 1.0 WHAT IS CE MARKING? CE marking demonstrates compliance with the appropriate manufacturing standard for a product. Typically this concerns
More informationL 301/14 Official Journal of the European Union DECISIONS COMMISSION
L 301/14 Official Journal of the European Union 20.11.2007 II (Acts adopted under the EC Treaty/Euratom Treaty whose publication is not obligatory) DECISIONS COMMISSION COMMISSION DECISION of 9 November
More informationREGULATORY ROUNDUP MATERIALS MANAGEMENT. / / / Assent Compliance 2016
REGULATORY ROUNDUP MATERIALS MANAGEMENT info@assentcompliance.com / www.assentcompliance.com / 1 866 964 6931 / Assent Compliance 2016 1 Today s Moderator Travis Miller Assent Compliance General Counsel
More informationThis is an uncontrolled copy when in printed form. Please refer to the contact information for the latest version.
Product environmental attributes THE ECO DECLARATION Brand * Kyocera Logo Company name * Kyocera Mita Svenska AB Contact information * Box 1273 164 29 Kista Internet site * www.kyocera mita.se The company
More informationProduct environmental attributes THE ECO DECLARATION
Product environmental attributes THE ECO DECLARATION Brand * Hewlett-Packard Company name * Contact information * Internet site * Hewlett-Packard Company Hans Wendschlag http://www.hp.com/hpinfo/globalcitizenship/environment/contactemail.html
More informationPulse White Paper Regarding RoHS Compliance
Pulse White Paper Regarding RoHS Compliance Table of Contents Executive Summary... 2 Background/History... 3 Materials Selection... 3 Testing/Validation... 4 Implementation/Conclusion... 5 References...
More informationIndustrial Transformation and Advanced Value Chains Advanced Engineering and Manufacturing Systems
EUROPEAN COMMISSION Directorate-General for Internal Market, Industry, Entrepreneurship and SMEs Industrial Transformation and Advanced Value Chains Advanced Engineering and Manufacturing Systems GUIDANCE
More informationPlasma Ruggedized Solutions
Quality Clauses Q1 through Q9E apply to ALL Purchase Orders. Quality Clauses Q10 through Q20 apply when referenced in the text of the purchase order. Q1: Quality Management System The supplier shall maintain
More informationEA Accreditation for Notification (AfN) Project
EA Accreditation for Notification (AfN) Project Final Project Report endorsed by the EA General Assembly in May 2016 EA has completed its Accreditation for Notification (AfN) Project, aimed at increasing
More informationVerification Result :.
Verification Report. No. Date: 08 May 2018. Page 1 30. WUHU DELUX MOBILE INTERNET DEVICE CO.,LTD. WUHU MACHINERY INDUSTRIAL PARK, ANHUI, CHINA.. Name :. Designer Keyboard. SGS Job No. : RP17-012525 - SZ.
More informationConformity Assessments Revised Toy Safety Directive 2009/48/EC
Toy Safety Update Conformity Assessments Revised Toy Safety Directive 2009/48/EC Contents 1. Obligations of Economic Operators 2. Introduction 3. Overview 4. How to use this guide 5. The Conformity Assessment
More informationGuide for Class I Manufacturers on Compliance with European Communities (Medical Devices) Regulations, 1994
Guide for Class I Manufacturers on Compliance with European Communities (Medical Devices) Regulations, 1994 SUR-G0006-2 27 AUGUST 2010 This guide does not purport to be an interpretation of law and/or
More informationThe Globalization of Product Stewardship
feature em The Globalization of Product Stewardship by Jeffrey Hunter and Kathi Futornick Recent international environmental laws and regulations are setting a new trend for comprehensive product requirements
More informationNew Regulatory Framework for UAS CEPT Workshop on Spectrum for Drones/UAS Copenhagen, The EASA Team
New Regulatory Framework for UAS CEPT Workshop on Spectrum for Drones/UAS Copenhagen, 29.05.18 The EASA Team TE.GEN.00409-001 Content of the Presentation Setting the Stage The Helsinki High Level Conference
More informationOPAC EN Operating Procedure for the Attestation of Conformity of Structural Bearings in compliance with Annex ZA of EN 1337/3/4/5/6/7
OPAC EN1337-00 Operating Procedure for the Attestation of Conformity to EN1337 Revision 00 Approved by BT3 on 20050525, by Board of directors on 20050610 Operating Procedure for the Attestation of Conformity
More informationNo. 85. An act relating to the regulation of octabde, pentabde, decabde, and the flame retardant known as Tris in consumer products. (S.
No. 85. An act relating to the regulation of octabde, pentabde, decabde, and the flame retardant known as Tris in consumer products. (S.81) It is hereby enacted by the General Assembly of the State of
More informationA A1 B+C B+D B+E B+F G H
Version in English language approved by RCD ADCO on 8th June 2016 EU Declaration of Conformity of Recreational Craft with the Design, Construction and Noise Emission requirements of Directive 2013/53/EU
More informationGuide to Documentation and Marking Part 6 General Accessories and Components for Slings
Guide to Documentation and Marking Part 6 General Accessories and Components for Slings Document reference LEEA 059-6 version 2 dated 23.02.15 Introduction. This guide is aimed at manufacturers, distributors
More informationDistributed by: www.jameco.com 1-800-81-4242 The content and copyrights of the attached material are the property of its owner. M Wiremount Socket.100.100 for.050 Pitch Cable 891 Series Preassembled, terminates
More informationMEDICINES CONTROL COUNCIL
MEDICINES CONTROL COUNCIL GUIDELINE FOR A LICENCE TO MANUFACTURE, IMPORT, EXPORT OR DISTRIBUTE MEDICAL DEVICES & IVDs This guideline is intended to provide recommendations to applicants wishing to submit
More informationDIRECTIVE 2006/42/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
DIRECTIVE 2006/42/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast) (Text with EEA relevance) THE EUROPEAN PARLIAMENT AND THE COUNCIL
More informationConformity assessment procedures for the Personal Protective Equipment Scheme
Conformity assessment procedures for the Personal Protective Equipment Scheme This scheme document describes the conformity assessment procedures and requirements for Personal Protective Equipment for
More informationTÜV SÜD BABT Production Quality Certification Scheme
TÜV SÜD BABT Production Quality Certification Scheme The Production Quality Certification Scheme for Manufacturers A Certification Body of Copyright TÜV SÜD BABT 2014 Page 1 of 38 CONTENTS Page AMENDMENT
More informationConformity Assessments
Industry support for effective compliance BTHA Toy Safety Directive Guidance 2009/48/EC Conformity Assessments 8 Primary Authority Assurance Milton Keynes Council (MKC) has assured this BTHA guidance as
More informationIndustry support for effective compliance. BTHA Toy Safety Directive Guidance 2009/48/EC. Markings & Warnings
Industry support for effective compliance BTHA Toy Safety Directive Guidance 2009/48/EC Markings & Warnings 4 Primary Authority Assurance Milton Keynes Council (MKC) has assured this BTHA guidance as Primary
More informationConformity Assessment of Own Brand Labelling
NBRG/306/06 Co-ordination of Title: Chapter: Conformity Assessment of Own Brand Labelling 2.5.5 Conformity assessment for particular product groups Text: Key words: manufacturer means the natural or legal
More informationREVERSE LOGISTICS IN THE ASPECT OF WEEE AND RoHS REGULATIONS
REVERSE LOGISTICS IN THE ASPECT OF WEEE AND RoHS REGULATIONS Aleksandra Nowakowska, MSc, anowa@zim.pcz.pl Częstochowa University of Technology, Management Faculty L`ubomir Jahnatek, PhD Ministry of Economy
More information3M Eurosocket Type C (Rows A & C or A, B & C Filled)
DIN 41612 compatible High density (64 & 96 position) Mates with DIN 41612 Type C headers High reliability contact design Can be daisy-chained or end terminated to flat cable Optional strain relief with
More information