Gas Transmission and Distribution Piping Systems
|
|
- Primrose Powell
- 6 years ago
- Views:
Transcription
1 ASME B (Revision of ASME B ) Gas Transmission and Distribution Piping Systems ASME Code for Pressure Piping, B31 AN INTERNATIONAL PIPING CODE
2 ASME B (Revision of ASME B ) Gas Transmission and Distribution Piping Systems ASME Code for Pressure Piping, B31 AN INTERNATIONAL PIPING CODE Two Park Avenue New York, NY USA
3 Date of Issuance: September 30, 2014 The next edition of this Code is scheduled for publication in This Code will become effective 6 months after the Date of Issuance. ASME issues written replies to inquiries concerning interpretations of technical aspects of this Code. Interpretations, Code Cases, and errata are published on the ASME Web site under the Committee Pages at as they are issued. Interpretations and Code Cases are also included with each edition. Errata to codes and standards may be posted on the ASME Web site under the Committee Pages to provide corrections to incorrectly published items, or to correct typographical or grammatical errors in codes and standards. Such errata shall be used on the date posted. The Committee Pages can be found at There is an option available to automatically receive an notification when errata are posted to a particular code or standard. This option can be found on the appropriate Committee Page after selecting Errata in the Publication Information section. ASME is the registered trademark of The American Society of Mechanical Engineers. This international code or standard was developed under procedures accredited as meeting the criteria for American National Standards and it is an American National Standard. The Standards Committee that approved the code or standard was balanced to assure that individuals from competent and concerned interests have had an opportunity to participate. The proposed code or standard was made available for public review and comment that provides an opportunity for additional public input from industry, academia, regulatory agencies, and the public-at-large. ASME does not approve, rate, or endorse any item, construction, proprietary device, or activity. ASME does not take any position with respect to the validity of any patent rights asserted in connection with any items mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability for infringement of any applicable letters patent, nor assumes any such liability. Users of a code or standard are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted as government or industry endorsement of this code or standard. ASME accepts responsibility for only those interpretations of this document issued in accordance with the established ASME procedures and policies, which precludes the issuance of interpretations by individuals. No part of this document may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. The American Society of Mechanical Engineers Two Park Avenue, New York, NY Copyright 2014 by THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS All rights reserved Printed in U.S.A.
4 CONTENTS Foreword... Committee Roster... Introduction... Summary of Changes... viii x xiv xvi General Provisions and Definitions General Scope and Intent Piping Systems Definitions Piping Systems Component Definitions Design, Fabrication, Operation, and Testing Terms and Definitions Quality Assurance Training and Qualification of Personnel Chapter I Materials and Equipment Materials and Equipment Qualification of Materials and Equipment Materials for Use in Low-Temperature Applications Marking Material Specifications Equipment Specifications Transportation of Line Pipe Conditions for the Reuse of Pipe Table Tensile Testing Chapter II Welding Welding General Preparation for Welding Qualification of Procedures and Welders Preheating Stress Relieving Weld Inspection Requirements Repair or Removal of Defective Welds in Piping Intended to Operate at Hoop Stress Levels of 20% or More of the Specified Minimum Yield Strength Chapter III Piping System Components and Fabrication Details Piping System Components and Fabrication Details Piping System Components Expansion and Flexibility Design for Longitudinal Stress Supports and Anchorage for Exposed Piping Anchorage for Buried Piping Tables Reinforcement of Welded Branch Connections, Special Requirements Thermal Expansion or Contraction of Piping Materials iii
5 Modulus of Elasticity for Carbon and Low Alloy Steel Chapter IV Design, Installation, and Testing Design, Installation, and Testing Steel Pipe Other Materials Compressor Stations Pipe-Type and Bottle-Type Holders Control and Limiting of Gas Pressure Valves Vaults Customers Meters and Regulators Gas Service Lines Tables Basic Design Factor, F Design Factors for Steel Pipe Construction Longitudinal Joint Factor, E Temperature Derating Factor, T, for Steel Pipe Pipeline Cover Requirements Pipeline Field Cold Bend Requirements Test Requirements for Steel Pipelines and Mains to Operate at Hoop Stresses of 30% or More of the Specified Minimum Yield Strength of the Pipe Maximum Hoop Stress Permissible During an Air or Gas Test Standard Thickness Selection Table for Ductile Iron Pipe Wall Thickness and Standard Dimension Ratio for Thermoplastic Pipe Diameter and Wall Thickness for Reinforced Thermosetting Plastic Pipe Nominal Values for Coefficients of Thermal Expansion of Thermoplastic Pipe Materials Design Factors, F Minimum Clearance Between Containers and Fenced Boundaries Maximum Allowable Operating Pressure for Steel or Plastic Pipelines or Mains Maximum Allowable Operating Pressure for Pipelines Operating at 100 psig (690 kpa) or More Maximum Allowable Operating Pressure for Pipelines Operating at Less Than 100 psig (690 kpa) Chapter V Operating and Maintenance Procedures Operating and Maintenance Procedures Affecting the Safety of Gas Transmission and Distribution Facilities Pipeline Maintenance Distribution Piping Maintenance Miscellaneous Facilities Maintenance Location Class and Changes in Number of Buildings Intended for Human Occupancy Pipeline Service Conversions Odorization Uprating iv
6 Figure Allowable Ripple Heights Tables Wall Thickness for Unlikely Occurrence of Burn-Through Location Class Wall Thickness Allowance for Uprating a Ductile Iron High-Pressure Main or System Chapter VI Corrosion Control Corrosion Control General External Corrosion Control for Steel Pipelines Cathodic Protection Criteria Operation and Maintenance of Cathodic Protection Systems Internal Corrosion Control Steel Pipelines in Arctic Environments Steel Pipelines in High-Temperature Service Stress Corrosion and Other Phenomena Cast Iron, Wrought Iron, Ductile Iron, and Other Metallic Pipelines Chapter VII Intentionally Left Blank Chapter VIII Offshore Gas Transmission A800 Offshore Gas Transmission A801 General A802 Scope and Intent A803 Offshore Gas Transmission Terms and Definitions A811 Qualification of Materials and Equipment A814 Material Specifications A817 Conditions for the Reuse and Requalification of Pipe A820 Welding Offshore Pipelines A821 General A823 Qualification of Procedures and Welders A825 Stress Relieving A826 Inspection of Welds A830 Piping System Components and Fabrication Details A831 Piping System Components A832 Expansion and Flexibility A834 Supports and Anchorage for Exposed Piping A835 Anchorage for Buried Piping A840 Design, Installation, and Testing A841 Design Considerations A842 Strength Considerations A843 Compressor Stations A844 On-Bottom Stability A846 Valves A847 Testing A850 Operating and Maintenance Procedures Affecting the Safety of Gas Transmission Facilities A851 Pipeline Maintenance A854 Location Class A860 Corrosion Control of Offshore Pipelines A861 External Corrosion Control A862 Cathodic Protection Criteria A864 Internal Corrosion Control v
7 Table A Design Factors for Offshore Pipelines, Platform Piping, and Pipeline Risers Chapter IX Sour Gas Service B800 Sour Gas Service B801 General B802 Scope and Intent B803 Sour Gas Terms and Definitions B813 Marking B814 Material Specifications B820 Welding Sour Gas Pipelines B821 General B822 Preparation for Welding B823 Qualification of Procedures and Welders B824 Preheating B825 Stress Relieving B826 Welding and Inspection Tests B830 Piping System Components and Fabrication Details B831 Piping System Components B840 Design, Installation, and Testing B841 Steel Pipe B842 Other Materials B843 Compressor Stations B844 Pipe-Type and Bottle-Type Holders B850 Additional Operating and Maintenance Considerations Affecting the Safety of Sour Gas Pipelines B851 Pipeline Maintenance B854 Location Class and Changes in Number of Buildings Intended for Human Occupancy B860 Corrosion Control of Sour Gas Pipelines B861 External Corrosion Control for Steel Pipelines B864 Internal Corrosion Control B867 Stress Corrosion and Other Phenomena Tables B ppm ROE B ppm ROE B Metric Example for 100-ppm ROE B Metric Example for 500-ppm ROE Appendices Mandatory Appendix A References Mandatory Appendix B Numbers and Subjects of Standards and Specifications That Appear in Mandatory Appendix A Nonmandatory Appendix C Publications That Do Not Appear in the Code or Mandatory Appendix A Mandatory Appendix D Specified Minimum Yield Strength for Steel Pipe Commonly Used in Piping Systems Mandatory Appendix E Flexibility and Stress Intensification Factors Mandatory Appendix F Extruded Headers and Welded Branch Connections Mandatory Appendix G Testing of Welders Limited to Work on Lines Operating at Hoop Stresses of Less Than 20% of the Specified Minimum Yield Strength Mandatory Appendix H Flattening Test for Pipe Mandatory Appendix I End Preparations for Buttwelding Nonmandatory Appendix J Commonly Used Conversion Factors vi
8 Mandatory Appendix K Criteria for Cathodic Protection Nonmandatory Appendix L Determination of Remaining Strength of Corroded Pipe Nonmandatory Appendix M Gas Leakage Control Criteria Nonmandatory Appendix N Recommended Practice for Hydrostatic Testing of Pipelines in Place Nonmandatory Appendix O Preparation of Technical Inquiries Nonmandatory Appendix P Nomenclature for Figures Mandatory Appendix Q Scope Diagrams Nonmandatory Appendix R Estimating Strain in Dents Index vii
Gas Transmission and Distribution Piping Systems
ASME B31.8-2010 (Revision of ASME B31.8-2007) Gas Transmission and Distribution Piping Systems ASME Code for Pressure Piping, B31 A N A M E R I C A N N A T I O N A L S T A N D A R D ASME B31.8-2010 (Revision
More informationCONTENTS. Foreword... Committee Roster Introduction Summary of Changes
CONTENTS Foreword.............................................................................. Committee Roster Introduction Summary of Changes General Provisions and Definitions 801 General... 1 802
More informationGas Transmission and Distribution Piping Systems
ASME B31.8-2007 (Revision of ASME B31.8-2003) Gas Transmission and Distribution Piping Systems ASME Code for Pressure Piping, B31 AN AMERICAN NATIONAL STANDARD Three Park Avenue New York, NY 10016 CONTENTS
More informationPipeline Transportation Systems for Liquids and Slurries
ASME B31.4-2016 (Revision of ASME B31.4-2012) Pipeline Transportation Systems for Liquids and Slurries ASME Code for Pressure Piping, B31 AN AMERICAN NATIONAL STANDARD ASME B31.4-2016 (Revision of ASME
More informationManaging System Integrity of Gas Pipelines
ASME B31.8S-2014 (Revision of ASME B31.8S-2012) Managing System Integrity of Gas Pipelines ASME Code for Pressure Piping, B31 Supplement to ASME B31.8 AN INTERNATIONAL PIPING CODE ASME B31.8S-2014 (Revision
More informationBuilding Services Piping
ASME B31.9-2014 (Revision of ASME B31.9-2011) Building Services Piping ASME Code for Pressure Piping, B31 AN AMERICAN NATIONAL STANDARD ASME B31.9-2014 (Revision of ASME B31.9-2011) Building Services Piping
More informationBuilding Services Piping
ASME B31.9-2017 (Revision of ASME B31.9-2014) Building Services Piping ASME Code for Pressure Piping, B31 AN AMERICAN NATIONAL STANDARD ASME B31.9-2017 (Revision of ASME B31.9-2014) Building Services Piping
More informationHigh-Purity Water Treatment Systems
ASME PTC 31-2011 [Revision of ASME PTC 31-1973 (R1991)] High-Purity Water Treatment Systems Performance Test Codes AN AMERICAN NATIONAL STANDARD ASME PTC 31-2011 [Revision of ASME PTC 31-1973 (R1991)]
More informationBelow-the-Hook Lifting Devices
ASME B30.20-2013 (Revision of ASME B30.20-2010) Below-the-Hook Lifting Devices Safety Standard for Cableways, Cranes, Derricks, Hoist, Hooks, Jacks, and Slings AN AMERICAN NATIONAL STANDARD ASME B30.20-2013
More informationClosed Feedwater Heaters
ASME PTC 12.1-2015 [Revision of ASME PTC 12.1-2000 (R2005)] Closed Feedwater Heaters Performance Test Codes AN AMERICAN NATIONAL STANDARD ASME PTC 12.1-2015 [Revision of ASME PTC 12.1-2000 (R2005)] Closed
More informationSelf-Erecting Tower Cranes
ASME B30.29-2012 Self-Erecting Tower Cranes Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings AN AMERICAN NATIONAL STANDARD ASME B30.29-2012 Self-Erecting Tower Cranes Safety
More informationSafety Standard for Pressure Vessels for Human Occupancy
ASME PVHO-1 2012 (Revision of ASME PVHO-1 2007) Safety Standard for Pressure Vessels for Human Occupancy AN AMERICAN NATIONAL STANDARD ASME PVHO-1 2012 (Revision of ASME PVHO-1 2007) Safety Standard for
More informationGas Turbine Inlet Air-Conditioning Equipment
ASME PTC 51-2011 Gas Turbine Inlet Air-Conditioning Equipment Performance Test Codes AN AMERICAN NATIONAL STANDARD ASME PTC 51-2011 Gas Turbine Inlet Air-Conditioning Equipment Performance Test Codes AN
More informationASME PTC (Revision of ASME PTC ) Test Uncertainty. Performance Test Codes AN AMERICAN NATIONAL STANDARD
ASME PTC 19.1-2013 (Revision of ASME PTC 19.1-2005) Test Uncertainty Performance Test Codes AN AMERICAN NATIONAL STANDARD ASME PTC 19.1-2013 (Revision of ASME PTC 19.1-2005) Test Uncertainty Performance
More informationASME A Standard for Elevator Suspension, Compensation, and Governor Systems
ASME A17.6-2010 Standard for Elevator Suspension, Compensation, and Governor Systems A N A M E R I C A N N A T I O N A L S T A N D A R D ASME A17.6-2010 Standard for Elevator Suspension, Compensation,
More informationReinforced Thermoset Plastic Corrosion-Resistant Equipment
ASME RTP-1 2013 (Revision of ASME RTP-1 2011) Reinforced Thermoset Plastic Corrosion-Resistant Equipment AN AMERICAN NATIONAL STANDARD ASME RTP-1 2013 (Revision of ASME RTP-1 2011) Reinforced Thermoset
More informationFired Steam Generators
ASME PTC 4-2013 (Revision of ASME PTC 4-2008) Fired Steam Generators Performance Test Codes AN AMERICAN NATIONAL STANDARD ASME PTC 4-2013 (Revision of ASME PTC 4-2008) Fired Steam Generators Performance
More informationReinforced Thermoset Plastic Corrosion-Resistant Equipment
ASME RTP-1 2015 (Revision of ASME RTP-1 2013) Reinforced Thermoset Plastic Corrosion-Resistant Equipment AN AMERICAN NATIONAL STANDARD ASME RTP-1 2015 (Revision of ASME RTP-1 2013) Reinforced Thermoset
More informationReinforced Thermoset Plastic Corrosion-Resistant Equipment
ASME RTP-1 2007 (Revision of ASME RTP-1 2005) Reinforced Thermoset Plastic Corrosion-Resistant Equipment AN AMERICAN NATIONAL STANDARD Three Park Avenue New York, NY 10016 Date of Issuance: April 9, 2008
More informationINTERPRETATIONS NO. 11
INTERPRETATIONS NO. 11 Replies to Technical Inquiries September 1,1993, Through January 31,1999 Interpretations 11-1 Thmgh 11-26 It has been agreed to publish intepretations issued by the B31 Committee
More informationCode on Nuclear Air and Gas Treatment
ASME AG-1 2012 (Revision of ASME AG-1 2009) Code on Nuclear Air and Gas Treatment AN AMERICAN NATIONAL STANDARD Date of Issuance: May 30, 2013 The next edition of this Code is scheduled for publication
More informationStainless Steel Pipe ASME B36.19M (Revision of ANSI/ASME B36.19M-1985) AN AMERICAN NATIONAL STANDARD
ASME B36.19M-2004 (Revision of ANSI/ASME B36.19M-1985) Stainless Steel Pipe www.tubingchina.com AN AMERICAN NATIONAL STANDARD A N A M E R I C A N N A T I O N A L S T A N D A R D STAINLESS STEEL PIPE ASME
More informationPOWER PIPING J\$ME TO ASME B3I.I THE COMPLETE GUIDE. Charles Becht IV PRESS
POWER PIPING THE COMPLETE GUIDE TO ASME B3I.I by Charles Becht IV J\$ME PRESS Contents About the Author List of Figures List of Tables iii ix xi Chapter 1 Background and General Information 1 1.1 History
More informationCONTENTS. Fittings, Bends, and Intersections
CONTENTS Foreword.............................................................................. Committee Roster Introduction Summary of Changes Chapter I 100 Chapter II Part 1 101 102 Part 2 103 104 Part
More informationII Part A Ferrous Material Specifications (Beginning to SA-450)
2010 ASME Boiler and Pressure Vessel Code A N I N T E R N A T I O N A L C O D E II Part A Ferrous Material Specifications (Beginning to SA-450) Materials INTENTIONALLY LEFT BLANK AN INTERNATIONAL CODE
More informationSafety Standard for Portable Automotive Service Equipment
ASME PASE-2014 (Revision, Redesignation, and Consolidation of ASME PALD-2009 and ASME ASP-2010) http://www.booksfiles.org/2348-asme-pase-2014.html Safety Standard for Portable Automotive Service Equipment
More informationASME Boiler and Pressure Vessel Code AN INTERNATIONAL CODE. Part B Nonferrous Material Specifications
2013 ASME Boiler and Pressure Vessel Code AN INTERNATIONAL CODE II Materials Part B Nonferrous Material Specifications 4. 2013 ASME FINAL Covers_II Part B MECH 5.9.indd 1 5/15/13 5:30 PM AN INTERNATIONAL
More informationIII. Rules for Construction of Nuclear Facility Components. Division 2 Code for Concrete Containments
2013 ASME Boiler and Pressure Vessel Code AN INTERNATIONAL CODE III Rules for Construction of Nuclear Facility Components Division 2 Code for Concrete Containments ACI Standard 359-13 17. 2013 ASME FINAL
More informationASME Boiler and Pressure Vessel Code AN INTERNATIONAL CODE. Materials. Part D Properties (Metric)
2013 ASME Boiler and Pressure Vessel Code AN INTERNATIONAL CODE II Materials Part D Properties (Metric) 6. 2013 ASME FINAL Covers_II Part D (Met) MECH 5.9.indd 1 5/15/13 5:28 PM AN INTERNATIONAL CODE
More informationDESIGN FACTOR GUIDELINES FOR HIGH PRESSURE COMPOSITE HYDROGEN TANKS STP/PT-005
DESIGN FACTOR GUIDELINES FOR HIGH PRESSURE COMPOSITE HYDROGEN TANKS STP/PT-005 Date of Issuance: August 1, 2006 This report was prepared as an account of work sponsored by the National Renewable Energy
More informationEXTENDED LOW CHROME STEEL FATIGUE RULES STP-PT-027
EXTENDED LOW CHROME STEEL FATIGUE RULES STP-PT-027 Date of Issuance: January 29, 2009 This report was prepared as an account of work sponsored by ASME Pressure Technologies Codes and Standards and the
More informationSTP-PT-026 GUARANTEED HIGHER STRENGTH PROPERTIES
STP-PT-026 GUARANTEED HIGHER STRENGTH PROPERTIES Date of Issuance: January 29, 2009 This report was prepared as an account of work sponsored by ASME Pressure Technologies Codes and Standards and the ASME
More informationPROPERTIES FOR COMPOSITE MATERIALS IN HYDROGEN SERVICE
Designator: Meta Bold 24/26 Revision Note: Meta Black 14/16 PROPERTIES FOR COMPOSITE MATERIALS IN HYDROGEN SERVICE Date of Issuance: March 19, 2008 This report documents the work sponsored by National
More informationSTP-PT-050 AN INVESTIGATION OF THREE RADIOGRAPHIC ACCESS PORT PLUG GEOMETRIES AND THE SURROUNDING PIPE WALL UNDERGOING CREEP
STP-PT-050 AN INVESTIGATION OF THREE RADIOGRAPHIC ACCESS PORT PLUG GEOMETRIES AND THE SURROUNDING PIPE WALL UNDERGOING CREEP STP-PT-050 AN INVESTIGATION OF THREE RADIOGRAPHIC ACCESS PORT PLUG GEOMETRIES
More informationCRA Clad or Lined Steel Pipe
CRA Clad or Lined Steel Pipe API SPECIFICATION 5LD FOURTH EDITION, MARCH 2015 API MONOGRAM PROGRAM EFFECTIVE DATE: SEPTEMBER 3, 2015 Special Notes API publications necessarily address problems of a general
More informationASME PTC Flow Measurement
ASME PTC 19.5-2004 Flow Measurement Performance Test Codes A N A M E R I C A N N A T I O N A L S T A N D A R D ASME PTC 19.5-2004 Flow Measurement Performance Test Codes AN AMERICAN NATIONAL STANDARD Three
More informationSTP-PT-052 ALIGN MECHANICAL AND CIVIL-STRUCTURAL EARTHQUAKE DESIGN AND QUALIFICATION RULES FOR ASME B31 PIPING SYSTEMS AND PIPELINES
ALIGN MECHANICAL AND CIVIL-STRUCTURAL EARTHQUAKE DESIGN AND QUALIFICATION RULES FOR ASME B31 PIPING SYSTEMS AND PIPELINES ALIGN MECHANICAL AND CIVIL-STRUCTURAL EARTHQUAKE DESIGN AND QUALIFICATION RULES
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 13847 Second edition 2013-12-15 Petroleum and natural gas industries Pipeline transportation systems Welding of pipelines Industries du pétrole et du gaz naturel Conduites pour
More informationFrom the desk of G. A. Aaker, Jr., PE.
SAMPLE CALCULATIONS TO DETERMINE THE REQUIRED MINIMUM WALL THICKNESS PER DOT 192 / ASME B31.8 FOR GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS 192.103 GENERAL Pipe must be designed with sufficient
More informationCONTENTS. Foreword... xi Statements of Policy... xv Personnel... xvii Summary of Changes... xxvii
CONTENTS Foreword... xi Statements of Policy... xv Personnel... xvii Summary of Changes... xxvii SUBPART 1 STRESS TABLES... 1 Statement of Policy on Information Provided in the Stress Tables... 1 Guideline
More informationIII. Rules for Construction of Nuclear Facility Components. Division 1 Subsection NE Class MC Components
2013 ASME Boiler and Pressure Vessel Code AN INTERNATIONAL CODE III Rules for Construction of Nuclear Facility Components Division 1 Subsection NE Class MC Components 12. 2013 ASME FINAL Covers_III Div
More informationCanadian Standards Association Oil and gas pipeline systems. Technical Committee on Petroleum and Natural Gas Industry Pipeline Systems and Materials
Canadian Standards Association Oil and gas pipeline systems Contents Technical Committee on Petroleum and Natural Gas Industry Pipeline Systems and Materials Executive Committee on Petroleum and Natural
More informationSTP-NU-018 CREEP-FATIGUE DATA AND EXISTING EVALUATION PROCEDURES FOR GRADE 91 AND HASTELLOY XR
STP-NU-018 CREEP-FATIGUE DATA AND EXISTING EVALUATION PROCEDURES FOR GRADE 91 AND HASTELLOY XR Date of Issuance: May 21, 2009 This report was prepared as an account of work sponsored by U.S. Department
More informationVERIFICATION OF ALLOWABLE STRESSES IN ASME SECTION III SUBSECTION NH FOR ALLOY 800H
Designator: Meta Bold 24/26 Revision Note: Meta Black 14/16 VERIFICATION OF ALLOWABLE STRESSES IN ASME SECTION III SUBSECTION NH FOR ALLOY 800H Date of Issuance: November 1, 2008 This report was prepared
More informationIMPROVEMENT OF ASME NH
STP-NU-013 Designator: Meta Bold 24/26 Revision Note: Meta Black 14/16 IMPROVEMENT OF ASME NH FOR GRADE 91 NEGLIGIBLE CREEP AND CREEP-FATIGUE Date of Issuance: September 3, 2008 This report was prepared
More informationPART PG GENERAL REQUIREMENTS FOR ALL METHODS OF CONSTRUCTION
CONTENTS Foreword... xv Statements of Policy... xvii Personnel... xix Preamble... xxxi Summary of Changes... xxxiii List of Changes in BC Order... xxxvi PART PG GENERAL REQUIREMENTS FOR ALL METHODS OF
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15590-2 First edition 2003-12-15 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 2: Fittings Industries du
More informationSTP-NU-035 EXTEND ALLOWABLE STRESS VALUES FOR ALLOY 800H
STP-NU-035 EXTEND ALLOWABLE STRESS VALUES FOR ALLOY 800H STP-NU-035 EXTEND ALLOWABLE STRESS VALUES FOR ALLOY 800H Prepared by: Robert W. Swindeman Cromtech Inc Douglas L. Marriott Stress Engineering Services
More informationASME B31.3 CUMULATIVE INDEX INTERPRETATIONS VOLS SUBJECT INDEX. Assembly and Erection Authorized Inspector (see Owner s Inspector)
SUBJECT INDEX Acceptance Criteria pressure tests 1-2 weld 1-1 1-9 1-14 1-41 2-8 5-09 5-13 5-17 5-18 5-20 6-04 7-06 8-32 12-22 13-16 14-02 14-07 24-03 24-26 Additive Manufacturing 25-39 25-40 Allowable
More informationGENERAL CONTENTS SECTION I - NUCLEAR ISLAND COMPONENTS
- June 2013 Addendum GENERAL CONTENTS SECTION I - NUCLEAR ISLAND COMPONENTS SUBSECTION "A" : GENERAL RULES SUBSECTION "B" : CLASS 1 COMPONENTS SUBSECTION "C" : CLASS 2 COMPONENTS SUBSECTION "D" : CLASS
More informationCRACK GROWTH AT STRUCTURAL DISCONTINUITIES AND WELDS
CREEP AND CREEP-FATIGUE CRACK GROWTH AT STRUCTURAL DISCONTINUITIES AND WELDS Prepared by: F. W. Brust G. M. Wilkowski P. Krishnaswamy K. Wichman Engineering Mechanics Corporation of Columbus (Emc 2 ) Creep
More information192GasCatalog.
192GasCatalog www.energyu.org www.midwestenergy.org 192-Abnormal Operating Conditions... 4 192-0101 Characteristics and Hazards of Natural Gas... 4 192-0201 Gas Detection and Alarm System Maintenance...
More informationVIII. Rules for Construction of Pressure Vessels. Division 1. ASME Boiler and Pressure Vessel Code AN INTERNATIONAL CODE
2013 ASME Boiler and Pressure Vessel Code AN INTERNATIONAL CODE VIII Rules for Construction of Pressure Vessels Division 1 24. 2013 ASME FINAL Covers_VIII Div 1 Rules PV ALT MECH 5.17.indd 1 5/17/13 11:11
More informationVERIFICATION OF ALLOWABLE STRESSES IN ASME SECTION III SUBSECTION NH FOR GRADE 91 STEEL
Designator: Meta Bold 24/26 Revision Note: Meta Black 14/16 VERIFICATION OF ALLOWABLE STRESSES IN ASME SECTION III SUBSECTION NH FOR GRADE 91 STEEL Allowable Stresses in Section III-NH for Grade 91 Date
More informationSTP-NU-057 ASME CODE DEVELOPMENT ROADMAP FOR HDPE PIPE IN NUCLEAR SERVICE
STP-NU-057 ASME CODE DEVELOPMENT ROADMAP FOR HDPE PIPE IN NUCLEAR SERVICE STP-NU-057 ASME CODE DEVELOPMENT ROADMAP FOR HDPE PIPE IN NUCLEAR SERVICE Prepared by: Adel N. Haddad A. N. Haddad Plastic Consulting,
More informationCalculation of Heater-tube Thickness in Petroleum Refineries API STANDARD 530 SEVENTH EDITION, APRIL 2015
Calculation of Heater-tube Thickness in Petroleum Refineries API STANDARD 530 SEVENTH EDITION, APRIL 2015 Special Notes API publications necessarily address problems of a general nature. With respect to
More informationSpecification for Pipeline Valves
Specification for Pipeline Valves ANSI/API SPECIFICATION 6D TWENTY-THIRD EDITION, APRIL 2008 EFFECTIVE DATE: OCTOBER 1, 2008 CONTAINS API MONOGRAM ANNEX AS PART OF US NATIONAL ADOPTION ISO 14313:2007 (Identical),
More informationASME BPVC.II.D.M SECTION II MATERI ALS ASME Boiler and Pressure Vessel Code An International Code. Pa r t D Prop er ties (M etric)
ASME BPVC.II.D.M -2017 SECTION II MATERI ALS 2017 ASME Boiler and Pressure Vessel Code An International Code Pa r t D Prop er ties (M etric) Markings such as ASME, ASME Standard, or any other marking including
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15590-3 First edition 2004-11-01 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 3: Flanges Industries du
More informationASME B31.3 Process Piping. 19. What s Different in B31.1
ASME B31.3 Process Piping Charles Becht IV, PhD, PE Don Frikken, PE Instructors BECHT ENGINEERING COMPANY, INC. What s Different in B31.1-1 19. What s Different in B31.1 Scope Organization of the Code
More informationSubpart E Welding of Steel in Pipelines
Subpart E Welding of Steel in Pipelines 192.221 Scope This subpart prescribes minimum requirements for welding steel materials in pipelines. This subpart does not apply to welding that occurs during the
More informationLinings of Aboveground Petroleum Storage Tank Bottoms API RECOMMENDED PRACTICE 652 FOURTH EDITION, SEPTEMBER 2014
Linings of Aboveground Petroleum Storage Tank Bottoms API RECOMMENDED PRACTICE 652 FOURTH EDITION, SEPTEMBER 2014 Special Notes API publications necessarily address problems of a general nature. With respect
More informationRegulatory Agenda and Notices RSPA / OPS
Regulatory Agenda and Notices RSPA / OPS Download the Regulations http://www.tsi.dot.gov Click on Pipeline Safety (Valve Setting), Publications & Follow Links Advisory Bulletins Advisory Bulletins http://ops.dot.gov
More informationBODY OF KNOWLEDGE API-570 AUTHORIZED PIPING INSPECTOR CERTIFICATION EXAMINATION
BODY OF KNOWLEDGE API-570 AUTHORIZED PIPING INSPECTOR CERTIFICATION EXAMINATION 2018 (Replaces February 2017) API Authorized Piping Inspectors must have a broad knowledge base relating to maintenance,
More informationPipeline Systems PIP PLSC0013 Non-Destructive Examination of ASME B31.4 and B31.8 Metallic Pipelines
February 2017 Pipeline Systems PIP PLSC0013 Non-Destructive Examination of ASME B31.4 and B31.8 Metallic Pipelines PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process
More informationASME/ANSI Interpretations No. 7. Replies to Technical Inquiries May 1, 1988, Through April 30, 1989
ASME/ANSI 831.3 Interpretations No. 7 Replies to Technical Inquiries May 1, 1988, Through April 30, 1989 Gener~1 Inform~tion It has been agreed to publish interpretations issued by the 831 Committee concerning
More informationAWS D1.4/D1.4M:2018 An American National Standard. Structural Welding Code Steel Reinforcing Bars
An American National Standard Structural Welding Code Steel Reinforcing Bars An American National Standard Approved by the American National Standards Institute February 27, 2018 Structural Welding Code
More informationIII. Rules for Construction of Nuclear Facility Components. Division 1 Subsection NB Class 1 Components
2013 ASME Boiler and Pressure Vessel Code AN INTERNATIONAL CODE III Rules for Construction of Nuclear Facility Components Division 1 Subsection NB Class 1 Components 9. 2013 ASME FINAL Covers_III Div 1-Sub
More informationAS/NZS :2016. Pipelines Gas and liquid petroleum AS/NZS :2016. Part 2: Welding. Australian/New Zealand Standard
AS/NZS 2885.2:2016 Incorporating Amendment No. 1 Australian/New Zealand Standard Pipelines Gas and liquid petroleum Part 2: Welding AS/NZS 2885.2:2016 AS/NZS 2885.2:2016 This joint Australian/New Zealand
More informationCONTENTS --`,,```,,,,````-`-`,,`,,`,`,,`---
Buttwelding Ends CONTENTS Foreword... iv Committee Roster... v Correspondence With the B16 Committee... vi Summary of Changes... vii 1 Scope... 1 2 Transition Contours... 1 3 Welding Bevel Design... 2
More informationISO INTERNATIONAL STANDARD. Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
INTERNATIONAL STANDARD ISO 10434 Second edition 2004-07-15 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries Robinets-vannes en acier à chapeau boulonné pour les industries
More informationStandard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal 1
Designation: A 928/A 928M 04 www.tubingchina.com Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal 1 This standard is issued
More informationISO INTERNATIONAL STANDARD. Petroleum and natural gas industries Drilling and production equipment Drillthrough
INTERNATIONAL STANDARD ISO 13533 First edition 2001-12-01 Petroleum and natural gas industries Drilling and production equipment Drillthrough equipment Industries du pétrole et du gas naturel Équipements
More informationStandard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High- Temperature Service 1
Designation: Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High- Temperature Service 1 This standard is issued under the fixed designation A 426/A 426M; the number immediately
More informationISO INTERNATIONAL STANDARD. Petroleum and natural gas industries Procedures for testing casing and tubing connections
INTERNATIONAL STANDARD ISO 13679 First edition 2002-12-15 Petroleum and natural gas industries Procedures for testing casing and tubing connections Industries du pétrole et du gaz naturel Procédures de
More information2004 NBIC Interpretations
2004 NBIC Interpretations INTERPRETATION 04-23 Subject: Part RC 1110, RC-2050(c), RC-3030(c), RC-3031(e) Question 1: Does RC-1110 specifically require acceptance of the jurisdiction for alternative NDE
More informationStandard Specification for Carbon Steel Forgings for Piping Applications 1
Addr: 29, 227 Changle Rd., Shanghai, 2000. Tel: 86-2-6470807 Designation: A 0/A 0M 0 Endorsed by Manufacturers Standardization Society of the Valve and Fittings Industry Used in USDOE-NE Standards Standard
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 16422 First edition 2006-05-15 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure Specifications Tubes et
More informationMATERIAL SPECIFICATION FOR SMOOTH WALLED STEEL PIPE
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 1802 NOVEMBER 2004 MATERIAL SPECIFICATION FOR SMOOTH WALLED STEEL PIPE TABLE OF CONTENTS 1802.01 SCOPE 1802.02 REFERENCES 1802.03 DEFINITIONS - Not
More informationA Comparison: ASME B31.1 Power Piping versus ASME B31.3 Process Piping
A Comparison: ASME B31.1 Power Piping versus ASME B31.3 Process Piping Don Frikken, PE BECHT ENGINEERING COMPANY, INC. 1 Topics Discussed B31 History Scopes Organization of the Codes Bases for Allowable
More information6.1 General. This chapter shall provide requirements for correct use of sprinkler system components and hardware.
NFPA 13-Proposed 2013 Edition Standard for the Installation of Sprinkler Systems TIA Log No.: 1054 Reference: Chapter 6 Comment Closing Date: June 1, 2012 Submitter: Bob Caputo, Fire & Life Safety America
More informationCommon Operating Problems
SYDNEY Pressure Vessels Field Manual Common Operating Problems and Practical Solutions Maurice Stewart Oran T. Lewis AMSTERDAM BOSTON HEIDELBERG LONDON NEW YORK OXFORD PARIS SAN DIEGO SAN FRANCISCO SINGAPORE
More informationTable of Contents Page No.
Table of Contents Page No. Personnel... iii Foreword...v List of Tables...xii List of Figures... xiii 1. General Requirements...1 1.1 Scope...1 1.2 Approval...1 1.3 Definitions...1 1.4 Welding Symbols...1
More informationGuidelines for Avoiding Sulfidation (Sulfidic) Corrosion Failures in Oil Refineries
http://www.booksfiles.org/637-api-rp-939-c.html Guidelines for Avoiding Sulfidation (Sulfidic) Corrosion Failures in Oil Refineries Downstream Segment API RECOMMENDED PRACTICE 939-C FIRST EDITION, MAY
More informationANSI/ASM E Interpretations No.4' (This supplement is not part of ANSI/ASME B31.3 or its Addenda and is included for information only.!
: :. ANSI/ASM E 831.3 Interpretations No.4' (This supplement is not part of ANSI/ASME B31.3 or its Addenda and is included for information only.! It has been agreed to publish interpretations issued by
More informationAWS D14.3/D14.3M:2010 An American National Standard. Specification for Welding Earthmoving, Construction, and Agricultural Equipment
An American National Standard Specification for Welding Earthmoving, Construction, and Agricultural Equipment An American National Standard Approved by the American National Standards Institute May 26,
More informationREFERENCE SYLLABUS. for WELDING EXAMINER & WELDING EXAMINER IN TRAINING CERTIFICATES OF COMPETENCY EXAMINATIONS
WELDING EXAMINER & CERTIFICATES OF COMPETENCY S AB-94 Edition 1, Revision 6, 2016-05-01 This syllabus is being phased out and will be discontinued on April 30, 2018. GENERAL INFORMATION INTRODUCTION: This
More informationISO INTERNATIONAL STANDARD. Petroleum, petrochemical and natural gas industries Hairpin-type heat exchangers
INTERNATIONAL STANDARD ISO 12212 First edition 2012-08-01 Petroleum, petrochemical and natural gas industries Hairpin-type heat exchangers Industries du pétrole et du gaz naturel Échangeurs thermiques
More informationSteel Pipelines Crossing Railroads and Highways
Steel Pipelines Crossing Railroads and Highways API RECOMMENDED PRACTICE 1102 SEVENTH EDITION, DECEMBER 2007 ERRATA, NOVEMBER 2008 ERRATA 2, MAY 2010 ERRATA 3, SEPTEMBER 2012 ERRATA 4, FEBRUARY 2014 ERRATA
More informationACCREDITATION OF MANUFACTURERS AND INSTALLERS OF PRESSURE PIPING PARTS AND SYSTEMS
ACCREDITATION OF MANUFACTURERS AND INSTALLERS OF PRESSURE PIPING PARTS AND SYSTEMS TSSA GUIDE FOR SURVEY TEAMS The Technical Standards and Safety Authority Boilers and Pressure Vessels Safety Division
More informationThis document is a preview generated by EVS
TECHNICAL REPORT ISO/TR 17671-1 First edition 2002-02-01 Welding Recommendations for welding of metallic materials Part 1: General guidance for arc welding Soudage Recommandations pour le soudage des matériaux
More informationDrain, Waste and Vent (DWV) Internal Cleanout Fittings
IAPMO IGC 78-20182019 PUBLIC REVIEW DRAFT Drain, Waste and Vent (DWV) Internal Cleanout Fittings IAPMO Standard Published: April 2018 Previous Editions: April 2018, July 2002, December 2001, April 1999,
More informationCONTENTS. Foreword... xiii Statements of Policy... xv Personnel... xvii Organization of Section III... xxvii Summary of Changes...
CONTENTS Foreword... xiii Statements of Policy... xv Personnel... xvii Organization of Section III... xxvii Summary of Changes... xxxi Article NB-1000 Introduction... 1 NB-1100 Scope... 1 NB-1110 Aspects
More informationASME B31.3 Process Piping
ASME B31.3 Process Piping Charles Becht IV, PhD, PE Don Frikken, PE Instructors BECHT ENGINEERING COMPANY, INC. Nonmetallic Piping - 1 Piping Development Process 1. Establish applicable system standard(s)
More informationSpecification for Welding Earthmoving, Construction, and Agricultural Equipment
Key Words Structural welds, field repair, welding, earthmoving equipment, construction equipment, agricultural equipment AWS D14.3/D14.3M:2005 An American National Standard Approved by American National
More informationStandard Specification for Carbon Steel Forgings for Piping Applications 1
Designation: A0/A0M 4 Endorsed by Manufacturers Standardization Society of the Valve and Fittings Industry Used in USDOE-NE Standards Standard Specification for Carbon Steel Forgings for Piping Applications
More informationUNI-BELL PVC PIPE ASSOCIATION UNI-B-15-10
UNI-BELL PVC PIPE ASSOCIATION UNI-B-15-10 RECOMMENDED STANDARD SPECIFICATION FOR POLYVINYL CHLORIDE (PVC) FABRICATED PRESSURE FITTINGS November 2010 UNI-BELL PVC PIPE ASSOCIATION 2711 LBJ Freeway, Suite
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 13535 First edition 2000-12-15 Petroleum and natural gas industries Drilling and production equipment Hoisting equipment Industries du pétrole et du gaz naturel Équipements de
More informationTHE TECHNICAL STANDARDS AND SAFETY ACT, 2000, S.O. 2000, c. 16 ( the Act ) and
TECHNICAL STANDARDS & SAFETY AUTHORITY 14 th Floor, Centre Tower 3300 Bloor Street West Toronto, Ontario Canada M8X 2X4 IN THE MATTER OF: THE TECHNICAL STANDARDS AND SAFETY ACT, 2000, S.O. 2000, c. 16
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15761 First edition 2002-12-15 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries Robinets-vannes, robinets à soupape
More information