High Temperature (230 C) Wirebondable Thin Film Chip Resistors and Resistor Networks
|
|
- Amie Marsh
- 6 years ago
- Views:
Transcription
1 MKHT (NHT) High Temperature (230 ) irebondable Thin ilm hip esistors and esistor Networks SIN SUPPOT TOOLS Models vailable INTOUTION click logo to get started or applications such as down hole applications, the need for parts able to withstand very severe conditions (temperature as high as 215 powered or up to 230 un-powered) has leaded to push out the limit of the thin film technology. esigners might read the application note Power issipation onsiderations in High Precision Vishay Sfernice Thin ilm hip esistors and rrays (P, P, etc ) (High Temperature pplication) in conjunction with this datasheet to help them to properly design their Ps and get the best performances of the MKHT. research and development engineers will be willing to support any customer design considerations. TUS Operating temperature range: -55 ; +215 Storage temperature: -55 ; +230 irebondable (aluminum pads) luminum or gold pads Large selection of sizes available ustom networks available on request (NHT) Temperature coefficient down to ± 15 ppm/ (-55 ; +215 ) Tolerance down to ± 0.05 % Temperature coefficient remains at ± 15 ppm/ after long term storage at 230 Material categorization: for definitions of compliance please see TPIL POMN (1) hen applicable (networks only) S TKIN (1) T ± 25 ppm/ 2 ppm/ S TIO (1) TOL. ± 0.05 % 0.02 % MHNIL SPIITIONS esistive element Nichrome (Nir) Substrate material Silicon (size 22, 33, 55, 515) - alumina (other sizes) onding pads luminum (l) or gold (u) Passivation Silicon nitride (Si 3 N 4 ) ack metallization (1) old (thickness = 0.5 μm typical) on nickel barrier (1 μm typical) (1) hen applicable (only on alumina substrate) rift (%) ith Pd (T j = 230 ) T = 185 T = 200 T = 215 T = 230 T (-55 ; +215 ) remains unchanged after h storage t (h) evision: 30-Jan-18 1 ocument Number: or technical questions, contact: sferthinfilm@vishay.com THIS OUMNT IS SUJT TO HN ITHOUT NOTI. TH POUTS SI HIN N THIS OUMNT SUJT TO SPII ISLIMS, ST OTH T
2 MKHT (NHT) SHMTI IONL HIP SISTOS IONL SISTOS NTOKS MKHT22 MKHT55 MKHT MKHT515 MKHT = 2 = = 2 = 3 = 4 = MKHT MKHT MKHT0603 MKHT = 2 = 3 = 4 = = 2 = 3 = 4 = 5 = 6 = 7 = 8 = MKHT1206 MKHT2010 MKHT N MKHT N = 2 = 3 = 4 = 5 = = 2 = 3 = 4 = 5 = 6 = 7 = 8 = 9 = PO TIN UV ated Power (%) mbient Temperature in evision: 30-Jan-18 2 ocument Number: or technical questions, contact: sferthinfilm@vishay.com THIS OUMNT IS SUJT TO HN ITHOUT NOTI. TH POUTS SI HIN N THIS OUMNT SUJT TO SPII ISLIMS, ST OTH T
3 MKHT (NHT) PTTN IONL HIP SISTOS MKHT22 Type MKHT22 Type MKHT55 IONL SISTOS NTOKS MKHT33 MKHT48 H H MKHT515 MKHT408 MKHT508 MKHT0603 MKHT0805 MKHT816 MKHT914 MKHT1206 I J H MKHT2010 IMNSIONS in millimeters ± 0.05 ± 0.05 max. SIS MKHT22 Type MKHT22 Type MKHT MKHT MKHT MKHT MKHT MKHT IMNSIONS in millimeters SIS ± 0.05 ± 0.05 max. H I J MKHT MKHT MKHT408 MKHT MKHT816 MKHT evision: 30-Jan-18 3 ocument Number: or technical questions, contact: sferthinfilm@vishay.com THIS OUMNT IS SUJT TO HN ITHOUT NOTI. TH POUTS SI HIN N THIS OUMNT SUJT TO SPII ISLIMS, ST OTH T
4 MKHT (NHT) STN LTIL SPIITIONS - are esistors hips MOL SIZ SISTN N (1) T (2) -55 ; +215 ± ppm/ TOLN ± % PO TIN (3) P 70 PO TIN (3) P 215 MKHT to 500K 15, , 0.1, 0.5, MKHT to 2M 15, , 0.1, 0.5, MKHT to 5M 15, , 0.1, 0.5, MKHT to 320K 15, , 0.1, 0.5, MKHT to 720K 15, , 0.1, 0.5, MKHT to 2.7M 15, , 0.1, 0.5, MKHT to 7.5M 15, , 0.1, 0.5, (5) POMNS - are esistors hips TST SPIITIONS ONITIONS Limiting voltage rom 75 V to 300 V (depending on size) (4) Operating temperature range -55 ; +215 Max. temperature resistive element 220 Max. substrate temperature 230 Load life stability ± 0.35 % 2000 h / 220 (ambient) at Pn Storage temperature range -55 ; +230 Shelf life stability ± 0.6 % typ. (± 0.8 % max.) h / 230 STN LTIL SPIITIONS - are esistors Networks MOL SIZ SISTN N (1) SOLUT TOLN ± % TIO TOLN ± % SOLUT TIO T (2) T -55 ; ; +215 ± ppm/ ± ppm/ PO TIN (3) P 70 P SISTO PO TIN (3) P 215 P SISTO MKHT to 500K 0.05, 0.1, 0.5, , 0.05, 0.5, , 30 2, MKHT to 800K 0.05, 0.1, 0.5, , 0.05, 0.5, , 30 2, MKHT to 400K 0.05, 0.1, 0.5, , 0.05, 0.5, , 30 2, MKHT to 400K 0.05, 0.1, 0.5, , 0.05, 0.5, , 30 2, MKHT to 400K 0.05, 0.1, 0.5, , 0.05, 0.5, , 30 2, MKHT to 200K 0.05, 0.1, 0.5, , 0.05, 0.5, , 30 2, POMNS - are esistors Networks TST SPIITIONS ONITIONS Limiting voltage 100 V on each resistor (except MKHT33 50 V on each resistor) Operating temperature range -55 ; +215 Max. temperature resistive element 220 Max. substrate temperature 230 Load life stability ± 0.35 % 2000 h / 220 (ambient) at Pn Load life stability on ratio ± 0.35 % 2000 h / 220 (ambient) at Pn Storage temperature range -55 ; +230 Shelf life stability ± 0.6 % typ. (± 0.8 % max.) h/230 s (1) or ohmic range vs. tolerance and T see detailed table on next page. (2) Temperature oefficient of esistance are esistors hips ± 10 ppm/ -55 ; +155 ± 15 ppm/ -55 ; +215 ± 25 ppm/ -55 ; +155 ± 30 ppm/ -55 ; +215 are esistors Networks ± 10 ppm/ abs. 1 ppm/ tracking -55 ; +155 ± 15 ppm/ abs. 2 ppm/ tracking -55 ; +215 ± 25 ppm/ abs. 2 ppm/ tracking -55 ; +155 ± 30 ppm/ abs. 5 ppm/ tracking -55 ; +215 (3) Pn is intended with no back side metallized. or power handling improvement, please refer to application note Power issipation onsiderations in High Precision Thin ilm hip esistors and rrays (High Temperature pplications) and consult. (4) See Limiting Voltage table on next page. (5) It is possible to dissipate up to 0.3, but there will be an additional drift of 0.1 % after load life. evision: 30-Jan-18 4 ocument Number: or technical questions, contact: sferthinfilm@vishay.com THIS OUMNT IS SUJT TO HN ITHOUT NOTI. TH POUTS SI HIN N THIS OUMNT SUJT TO SPII ISLIMS, ST OTH T
5 MKHT (NHT) ST TOLN N T VS. OHMI VLU - are esistors hips OHMI N (1) SIS T: T: MIN. MX. MIN. MX k k 55 1 k 1.5 M M k 2 M M k k k k M M M M (1) est possible tolerance: 0.5 %: 10 to < %: 20 to < %: 39 to max. ohmic value SIZ LIMITIN VOLT in V V V V V V V V ST TOLN N T VS. OHMI VLU - are esistors Networks OHMI N SIS T: T: MIN. MX. MIN. MX k 250 k k 48 1 k 200 k k k 200 k k k 200 k k k 200 k k k 100 k k POPUL OPTION ack side metalized Option to order: 06 (not available for sizes 22, 33, 55, 515) Please refer to pplication Power onsiderations in High Precision Thin ilm hip esistors and rrays (High Temperature pplications) to evaluate performances improvement depending on process (brazing or gluing). hoice of P will be determinant. LOL PT NUMIN INOMTION - are esistors hips are hip esistors M K H T LOL MOL SIZ T VLU TOLN PS OPTION MKHT The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. designates decimal point 100 = = = 1 M (2) = 0.05 % = 0.1 % = 0.5 % = 1 % : aluminum : gold lank = no option 06 = back side metallized LOL PT NUMIN INOMTION - are esistors Networks are esistors Networks M K H T LOL MOL MKHT SIZ T VLU The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. designates decimal point S. TOLN = 0.05 % = 0.1 % = 0.5 % = 1 % TOLN TIO P = 0.02 % = 0.05 % = 0.5 % = 0.1 % PS : aluminum : gold OPTION lank = no option 06 = back side metallized 100 = = = 1 M (1) (1) or more than three significant digits an alphabetical code will be used ( to ZZ) and a cross table will be provided evision: 30-Jan-18 5 ocument Number: or technical questions, contact: sferthinfilm@vishay.com THIS OUMNT IS SUJT TO HN ITHOUT NOTI. TH POUTS SI HIN N THIS OUMNT SUJT TO SPII ISLIMS, ST OTH T
6 MKHT (NHT) LOL PT NUMIN INOMTION - are ustom Networks ustom Networks N H T LOL MOL N NHT 9999 specific reference number is assigned by evision: 30-Jan-18 6 ocument Number: or technical questions, contact: sferthinfilm@vishay.com THIS OUMNT IS SUJT TO HN ITHOUT NOTI. TH POUTS SI HIN N THIS OUMNT SUJT TO SPII ISLIMS, ST OTH T
7 Legal isclaimer Notice Vishay isclaimer LL POUT, POUT SPIITIONS N T SUJT TO HN ITHOUT NOTI TO IMPOV LIILIT, UNTION O SIN O OTHIS. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. ll operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. xcept as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. ustomers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners VISH INTTHNOLO, IN. LL IHTS SV evision: 08-eb-17 1 ocument Number: 91000
High Temperature (245 C) Thick Film Chip Resistor
High Temperature (245 C) Thick Film Chip Resistor DESIGN SUPPORT TOOLS Models Available click logo to get started FEATURES High temperature (245 C) Large ohmic value range 0.1 to 100 M Available Operating
More informationHigh Temperature (230 C) High Precision Thin Film Wraparound Chip Resistor Arrays, Sulfur Resistant
High Temperature (230 ) High Precision Thin ilm Wraparound hip Resistor rrays, Sulfur Resistant SIGN SUPPORT TOOLS Models vailable click logo to get started PRHT arrays can be used in most applications
More informationHigh Temperature (245 C) Thick Film Chip Resistor
High Temperature (245 C) Thick Film Chip Resistor For applications such as down hole applications or aircraft breaking systems, the need for parts able to withstand very severe conditions (temperature
More informationHigh Temperature (230 C) High Precision Thin Film Wraparound Chip Resistor Arrays, Sulfur Resistant
High Temperature (230 ) High Precision Thin ilm Wraparound hip Resistor rrays, Sulfur Resistant PRHT arrays can be used in most applications requiring a matched pair (or set) of resistor elements at very
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES High power rating Low thermal radiation of the case Wide ohmic value range Easy
More information20 W Power Resistor, Thick Film Technology, TO-220
20 W Power Resistor, Thick Film Technology, TO-220 DESIGN SUPPORT TOOLS Models Available click logo to get started The well known TO-220 package is compact and easy to mount. DIMENSIONS in millimeters
More informationESCC ( ) 4001/023 Qualified High Precision (5 ppm, 0.01 %), Thin Film Chip Resistors
( ) 4001/023 Qualified High Precision (5 ppm, 0.01 %), Thin Film Chip Resistors DESIGN SUPPORT TOOLS Models Available click logo to get started Thin Film division holds QML qualification ( technology flow
More informationHigh Stability Resistor Chips (< 0.25 % at Pn at 70 C during 1000 h) Thick Film Technology
High Stability Resistor Chips (< 0.25 % at Pn at 70 C during 0 h) Thick Film Technology thick film resistor chips are specially designed to meet very stringent specifications in terms of reliability, stability
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES High power rating: 500 W High overload capability up to 2 times rated power (see
More informationHigh Stability Resistor Chips (< 0.25 % at Pn at 70 C during 1000 h) Thick Film Technology
High Stability Resistor Chips (< 0.25 % at Pn at 70 C during 0 h) Thick Film Technology thick film resistor chips are specially designed to meet very stringent specifications in terms of reliability, stability
More informationPower Resistor, for Mounting onto a Heatsink Thick Film Technology
Power Resistor, for Mounting onto a Heatsink Thick Film Technology FEATURES 100 W at 25 C case temperature High power rating High overload capabilities up to 2500 V RMS Wide resistance range from 0.0 to
More informationSMD Wraparound Ultra Low Value Thin Film Resistors
SMD Wraparound Ultra ow Value Thin Film Resistors DESIGN SUPPORT TOOS Models click logo to get started With extremely low resistance and high power capabilities, these ultra low value resistors are available
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series
More informationHigh-Precision Thin Film Chip Resistor Arrays, Sulfur Resistant
High-Precision Thin Film Chip Resistor Arrays, Sulfur Resistant PRA arrays can be used in most applications requiring a matched pair (or set) of resistor elements. The networks provide 1 ppm/ C TCR tracking,
More informationSMD PTC - Nickel Thin Film Linear Thermistors
SMD PTC - Nickel Thin Film Linear Thermistors Notes (1) Contact if closer TCR lot tolerance is desired. (2) Other R 25 -values and tolerances are available upon request. (3) Rated continuous working voltage
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES High power rating: 500 W High overload capability up to 2 times rated Power (see energy curve Heatsink mounting Low thermal radiation
More informationPrecision Surface Mount Resistors Wirewound or Metal Film Technologies
Precision Surface Mount Resists irewound Metal Film Technologies FEATURES Accding to CECC 40402-801 (wirewound) ide range of ohmic values (0.04 to 1 M) Low temperature coefficient (± 25 ppm/ C available)
More informationWirewound Hex Power Resistor
irewound Hex Power Resistor FETURES Resistance-alloy round wire is continuously wound on specially designed porcelain insulators Open coil construction allows efficient heat dissipation and easily accomodates
More informationWirewound Resistors, Industrial Power, Aluminum Housed, Chassis Mount
Wirewound Resistors, Industrial Power, Aluminum Housed, hassis Mount DESIGN SUPPORT TOOLS Models click logo to get started FEATURES Molded construction for total environmental protection omplete welded
More informationMFM Metal Film MELF Resistor
MFM Metal Film MELF Resistor MFM (0102, 0204, 0207, 0309) Metal Film MELF Resistor Standard Type MFM (1/8W, 1/4W. 1/2W) Application - Automotive - Industrial Control System - Telecommunication Equipment
More informationPower Resistors Cooled by Auxiliary Heatsink (Not Supplied) Thick Film Technology
Power Resistors Cooled by Auxiliary Heatsink (Not Supplied) Thick Film Technology FEATURES Technology: thick film deposited on ceramic Cold system without external radiation High power / volume ratio Non-inductive
More information145 V PTC Thermistors for Overload Protection
45 V PTC Thermistors for Overload Protection FEATURES Wide range of trip and non-trip currents: From 47 ma up to A for the non-trip current Small ratio between trip and non-trip currents (I t /I nt =.5
More informationThick Film Chip Dividers, High Voltage
Thick Film hip Dividers, High Voltage DHV FETURES High voltage up to 3000 V Typical resistance ratios of 250:1, 500:1, etc.; vailable maximum resistance ratio of 800:1 vailable Flow solderable Tape and
More informationCommercial Thin Film Chip Resistor, Surface Mount Chip
Commercial Thin Film Chip Resistor, Surface Mount Chip PTN Actual Size 1505 These chip resistors are available in both top side and wraparound termination styles in a variety of sizes. They incorporate
More informationHigh Reliability Thick Film Resistor, Surface Mount Chip
High Reliability Thick Film Resistor, Surface Mount Chip M Actual Size 0502 Utilizing proven expertise in thick and thin film resistors to satisfy your manufacturing needs, Vishay provides a high rel chip
More informationPrecision Surface Mount Resistors Wirewound or Metal Film Technologies
Precision Surface Mount Resists FEATURES Approved accding (wirewound) Wide range of ohmic values (0.04 to 1 M ) Low temperature coefficient (± 25 ppm/ C available) Good electrical insulation All welded
More informationMetal Film Resistors, Industrial, Precision
Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Available Excellent high frequency characteristics Exceptionally
More informationPrecision Automotive Thin Film Chip Resistors, AEC-Q200 Qualified, 2 kv ESD Rating
Precision Automotive Thin Film Chip Resistors, AEC-Q200 Qualified, 2 kv ESD Rating PAT These chip resistors are available in wraparound terminations styles in 8 case sizes. They incorporate self passivated
More informationWirewound Resistors, Industrial Power, Aluminum Housed, Chassis Mount
Wirewound Resistors, Industrial Power, FEATURES Molded construction for total environmental protection omplete welded construction Meets applicable requirements of MIL-PRF-18546 Available in non-inductive
More information30 V to 60 V PTC Thermistors for Overload Protection
30 V to 60 V PTC Thermistors for Overload Protection FEATURES Wide range of trip and non-trip currents: From 94 ma up to 2 A for the trip current Small ratio between trip and non-trip currents (I t /I
More informationHigh Current Thermal Fuse
High Current Thermal Fuse FEATURES Functioning temperature: F = (235 ± 15) C Holding temperature: H = 160 C Current: 55 A Material categorization: For definitions of compliance please see www.vishay.com/doc?99912
More informationGold Wire Bondable Chip Resistor for Hybrid Circuits and High Temperature Applications up to +240 C, Long-Term Stability of 0.05%
Ultra High Precision Ultra Z1 High Foil Technology Precision Z1 Gold Foil Wire Technology Bondable Chip Resistor Gold Wire Bondable Chip Resistor for Hybrid Circuits and High Temperature Applications up
More informationTWIN Vertical SMD PTC Thermistors For Telecom Overload Protection
PC Series WIN Vertical SMD PC hermistors For elecom Overload Protection QUICK REFERENCE DAA PARAMEER VALUE UNI Resistance value at 25 C 1 to 5 Switching temperature 15 to 13 C Maximum voltage (RMS) 24
More informationPRELIMINARY. HTHA (Z1-Foil)
Ultra High Precision Z1-Foil Technology Chip Resistor for Hybrid Circuits with Aluminum Wire Bonding for High Temperature Applications up to +240 C, Long Term Stability of 0.05%, TCR to ± 1ppm/ C INTRODUCTION
More informationHTHA (Z1-Foil) Vishay Foil Resistors
Ultra High Precision Z1-Foil Technology Chip Resistor for Hybrid Circuits with Aluminum Wire Bonding for High Temperature Applications up to +240 C, Long Term Stability of 0.05%, TCR to ± 1ppm/ C INTRODUCTION
More informationPARAMETER Resistance Range 3 mω to 200 mω 2 mω to 200 mω
Models # 303144 and 303145 - Fixed Resistors CSM2512 and CSM3637 with Screen/Test Flow in Compliance with EEE-NST-002 (Tables 2 and 3, Film/Foil, Level 1) ML-PRF-55342 and ML-PRF-49465 303144 and 303145
More informationUltra High Precision Bulk Metal Foil Technology 4 Resistor Surface Mount Hermetic Network with 0.5 ppm/ C TCR Tracking and % Tolerance Match
Ultra High Precision Bulk Metal Foil Technology 4 Resistor Surface Mount Hermetic Network with 0.5 ppm/ C TCR Tracking and 0.005 % Tolerance Match INTRODUCTION Vishay model SMNH networks incorporate all
More informationMetal Film Resistors, Industrial, Flameproof
FP Metal Film Resistors, Industrial, Flameproof STANDARD ELECTRICAL SPECIFICATIONS HISTORICAL P 25 C POER RATING P C P 70 C FEATURES Small physical size Low cost FP resistors have the ability to withstand
More informationINTRODUCTION. PARAMETER Resistance Range 3 mω to 200 mω 2 mω to 200 mω
Models 303144 and 303145 Fixed Resistors CSM2512 and CSM3637 with Screen/est Flow in Compliance with EEE-NS-002 (ables 2 and 3, Film/Foil, Level 1) ML-PRF-55342 and ML-PRF-49465 FEURES emperature coefficient:
More informationHTHG* (Z1-Foil) Vishay Foil Resistors
HTHG* (Z1-Foil) Ultra High Precision Z1-Foil Technology Gold Wire Bondable Chip Resistor for Hybrid Circuits for High Temperature Applications up to +240 C, Long Term Stability of 0.05%,TCR to ± 1ppm/
More informationLead (Pb)-free Thick Film, Rectangular, Low Value Chip Resistors
Lead (Pb)-free Thick Film, Rectangular, FTURES Low resistance values (down to 0.1 Ω) Suitable for current sensors and shunts Metal glaze on high quality ceramic Protective overglaze Lead (Pb)-free solder
More informationPRELIMINARY. HTH (Z1-Foil)
Ultra High Precision Z1-Foil Technology Gold Wire Bondable Chip Resistor for Hybrid Circuits for High Temperature Applications up to +240 C, Long Term Stability of 0.05%,TCR to ± 1ppm/ C INTRODUCTION (VFR
More information30 V to 60 V PTC Thermistors For Overload Protection
30 V to 60 V PTC Thermistors 238 66. 5.../PTCCL..H...BE FEATURES Wide range of trip and non-trip currents: From 94 ma up to 2 A for the trip current Small ratio between trip and non-trip currents (I t
More informationRTD Simulator. Handy Resistor Simulates RTD Temperature Outputs, such as PT-100 and PT Vishay Foil Resistors FEATURES AND BENEFITS
Handy Resistor Simulates RTD Temperature Outputs, such as PT-100 and PT-1000 FEATURES AND BENEFITS Temperature coefficient of resistance (TCR): 55 to +125, 25 ref. RTD simulator (C): ±2 ppm/ typical (see
More informationFEATURES. Resistance Range Power Rating at 70 C Maximum Current Maximum Working Voltage (P x R) 1/2 Tightest Tolerance ± 0.1 %
Bulk Metal Technology High Precision, Current Sensing, Power Surface Mount, Metal Strip Resistor with Improved Stability 0.05 %, Resistance Value from 10 mω, Rated Power to 1 W and TCR to 0 ± 15 ppm/ C
More informationFRSH Series (0603, 0805, 1206, 1506, 2010, 2512) (Z1-Foil) Vishay Foil Resistors
Ultra High Precision Foil Wraparound Surface Mount Chip Resistor with Extended Pads for High Power/High Temperature Applications up to +225 C, Load Life Stability of 0.05%,TCR to ± 1ppm/ C INTRODUCTION
More informationPRELIMINARY. FRSH Series (0603, 0805, 1206, 1506, 2010, 2512) (Z1-Foil) Vishay Foil Resistors
Ultra High Precision Foil Wraparound Surface Mount Chip Resistor with Extended Pads for High Power/High Temperature Applications up to +225 C, Load Life Stability of 0.05%,TCR to ± 1ppm/ C INTRODUCTION
More informationVSMP Series (0603, 0805, 1206, 1506, 2010, 2018, 2512) (Z-Foil)
VSMP Series (63, 85, 126, 156, 21, 218, 2512) Ultra High Precision Foil Wraparound Surface Mount Chip Resistor with TCR of ±.5 ppm/ C and Power Coefficient of 5 ppm at Rated Power and Load Life Stability
More informationFRSTSeries (Z1FoilTechnology) Series (0603,0805,1206,1506,2010,2512) (0603, 0805, 1206, 1506, 2010, 2512)
FRSTSeries (Z1FoilTechnology) Series (0603,0805,1206,1506,2010,2512) Foil Technology) Ultra High-Precision Foil Wraparound Surface Mount Chip Resistor for High Temperature Applications up to +200 C, Humidity
More informationLA WW40WP4. Premium Edition Warm White 40 mil
Light Avenue Premium Edition LED series is designed for high performance consumer applications. Remarkable light extraction is reached by a particular top emitting design with vertical chip structure.
More informationPRELIMINARY. FRSH Series (0603, 0805, 1206, 1506, 2010, 2512) (Z1-Foil) Vishay Foil Resistors
Ultra High Precision Foil Wraparound Surface Mount Chip Resistor with Extended Pads for High Power/High Temperature Applications up to +225 C, Load Life Stability of 0.05%,TCR to ± 1ppm/ C INTRODUCTION
More informationHigh Ohmic / High Voltage Metal Glaze Leaded Resistors
High Ohmic / High Voltage Metal Glaze Leaded Resistors A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper
More informationLA WW40WP6. Premium Edition Warm White 40 mil
Light Avenue Premium Edition LED series is designed for high performance consumer applications. Remarkable light extraction is reached by a particular top emitting design with vertical chip structure.
More informationLA YG12WP5. Premium Edition Yellowish Green 12 mil
Light Avenue Premium Edition LED series is designed for high performance consumer applications. Remarkable light extraction is reached by a particular top emitting design with vertical chip structure.
More informationHigh Pulse, Fusible, Non-Inductive, Flameproof, Metal Film Resistor
High Pulse, Fusible, Non-Inductive, Flameproof, Metal Film Resistor FEATURES Designed to meet UL1412 safety requirements Defined fusing characteristics Inherent non-inductive design Superior surge handling
More informationSelf-Contained Weighing Module
FEATURES Capacities 3 90 kg Unique adjustable tare load cancelling mechanism Highly effective viscous damping 6 Built-in overload limit stops in three directions Weighing speed is much faster than standard
More informationLA PD120HP1. Premium Edition Standard PIN photodiode 120 mil
Light Avenue Premium Edition detector series is designed for high performance consumer applications. This chip is a high sensitive PIN photodiode chip with 7.7 mm 2 sensitive area detecting visible and
More informationFEATURES. Resistance Range Power Rating at 70 C Maximum Current Maximum Working Voltage (P x R) 1/2 Tightest Tolerance ± 0.1 %
Bulk Metal Technology High Precision, Current Sensing, Power Surface Mount, Metal Strip Resistor with mproved Stability.5 %, Resistance Value from 1 mω, Rated Power to 1 W and TCR to ± 15 ppm/ C The CSM
More informationSelf Contained Weighing Module
Model 9010 Self Contained Weighing Module FEATURES Capacities 3-90kg Unique adjustable tare load cancelling mechanism Highly effective viscous damping 6 Built-in overload limit stops in three directions
More information1-8M CMF F T-1 R36 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE TEMP. COEFFICIENT PACKAGING
CMF Industrial Metal Film Resistors, Industrial FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics Exceptionally
More information(1) For internal configuration and circuit schematic, please contact. (2) For power rating per each package, please refer to page 5
Custom Hermetically Sealed Precision Resistor Network Devices (PRND) With Screen/Test Flow in Compliance with EEE-INST-002 (Tables 2A and 3A, Film/Foil, evel ) and MI-PRF-340 INTRODUCTION PRND (Precision
More informationUltra High Precision, Surface Mount Metal Strip Resistor with Increased Power to 5W (40A max), Resistance Values from 3 m, and TCR to ± 15 ppm/ C
Ultra High Precision, Surface Mount Metal Strip Resistor with ncreased Power to 5W (40A max), Resistance Values from 3 m, and TCR to ± 15 ppm/ C NEW NTRODUCTON The CSM3637P is a low value current sense
More informationVAR. Vishay Foil Resistors FEATURES INTRODUCTION
Ultra High Precision, Z-Foil Audio Resistor Minimizes Noise and Distortion in the Signal Path with TCR of ± 0.05 ppm/ C, Tolerance to ± 0.005 % and High Linearity or Low Voltage Coefficient of Resistance
More informationKnob Potentiometer FEATURES
FEATURES 1 Watt at 40 C CECC 41300 P16 - version for professional and industrial applications PA16 - version for professional audio applications Compact (integrated) Minimum clearance required Safety in
More informationMIL-PRF-39035, Char. H with a Smooth and Unidirectional Output
Bulk Metal Foil Ultra High Technology Precision Trimming Potentiometers, 3 / 8 " Square, RJ24 Style, Designed to Meet or Exceed the Requirements of MIL-PRF-39035, Char. H with a Smooth and Unidirectional
More informationZPY3V9 to ZPY100. Zener Diodes. Vishay Semiconductors. Features Silicon Planar Power Zener Diodes For use in stabilizing and clipping circuits
ZPYV9 to ZPY Zener Diodes Features Silicon Planar Power Zener Diodes For use in stabilizing and clipping circuits e with high power rating The Zener voltages are graded according to the international E
More informationFRSM Series (Z1 Foil Technology)
(Z1 Foil Technology) UltraHigh-PrecisionFRSMWrap-AroundChipResistors,Z1FoilTechnologyConfiguration Resistors, Z1 Foil Technology Configuration with TCR of ±0.05 ppm/ C and Improved Load-Life Stability
More informationHigh Ohmic / High Voltage Metal Glaze Leaded Resistors
High Ohmic / High Voltage Metal Glaze Leaded Resistors FEATURES UL Approved (UL1676, file no: E171160) Meet the safety requirements of: - IEC 60065 - EN 60065 - VDE 0860 - CQC (China) High pulse loading
More informationIMPROVED PRODUCT. S Series. High Precision Foil Resistor with TCR of ± 2.0ppm/ C, Tolerance of ± 0.005% and Load Life Stability of ± 0.
THROUGH HOLE S Series High Precision Foil Resistor with TCR of ± 2.0ppm/ C, Any value at any tolerance available within resistance range INTRODUCTION Bulk Metal Foil (BMF) Technology outperforms all other
More informationLA LS56HRC1. Hyper red Laser Diode (660 nm), Single Mode. Important Safety Advice
Important Safety Advice Depending on the mode of operation, these devices emit highly concentrated visible light which can be hazardous to the human eye. Products which incorporate these devices have to
More informationLA LS56CYS1. Cyan Laser Diode (488 nm), Single Mode. Important Safety Advice
Important Safety Advice Depending on the mode of operation, these devices emit highly concentrated visible light which can be hazardous to the human eye. Products which incorporate these devices have to
More informationLA LM56HRS1. Hyper red Laser Diode (661 nm), Multi Mode. Important Safety Advice
Important Safety Advice Depending on the mode of operation, these devices emit highly concentrated visible light which can be hazardous to the human eye. Products which incorporate these devices have to
More informationLoad Cell Weigh Modules
FEATURES Capacity range: 500, 1.25K, 2.5K, 5K, and 10K lb (227, 567, 1.13K, 2.27K, and 4.5K kg) High-grade, welded, stainless-steel load beams (1.25K to 10K lb) Sealed to IP67 standards for washdown service
More informationLA LM56UXS1. Near Ultraviolet Laser Diode (406 nm), Multi Mode. Important Safety Advice
Important Safety Advice Depending on the mode of operation, these devices emit highly concentrated visible light which can be hazardous to the human eye. Products which incorporate these devices have to
More informationV I S H AY I N T E R T E C H N O L O G Y, I N C. Vishay Electro-Films. w w w. v i s h a y. c o m
V I S H AY I N T E R T E C H N O L O G Y, I N C. Pattern Substrates Using Thin Film Technology Vishay Electro-Films Application-Specific Pattern Substrates P r e c i s i o n R e s i s t o r s C a p a b
More informationVAR. Vishay Foil Resistors FEATURES INTRODUCTION
Ultra High Precision, Z-Foil Audio Resistor Minimizes Noise and Distortion in the Signal Path with TCR of ± 0.05 ppm/ C, Tolerance to ± 0.005 % and High Linearity or Low Voltage Coefficient of Resistance
More informationHigh Ohmic / High Voltage Metal Glaze Leaded Resistors
High Ohmic / High Voltage Metal Glaze Leaded Resistors A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper
More informationResistance WIREWOUND. Wiper Travel NO. OF TURNS 0.5 W 25 ± 2. 3 typical; 10 maximum
Accutrim 0 Vishay Foil esistors Bulk Metal Foil Ultra High Technology Precision Trimming Potentiometers, / 4 " ectilinear, J Style, Designed to Meet or Exceed The equirements of MIL-PF-097, Char. F with
More informationHigh Capacity Weigh Modules
FEATURES Capacity range: 200K and 300K lb (90.7K and 136K kg) Low profile and low deflection with symmetrical mounting bolt pattern for easy installation Floating design allows for thermal expansion and
More informationCRK Series Metal Strip, Wide Terminal Current Sense Resistor
RoHS COMPLIANT* & HALOGEN FREE** Features n ide terminal type n Excellent heat dissipation n High reliability n Metal alloy plate n RoHS compliant* and halogen free** Applications n Current sensing n Power
More informationYG-B Series. Single Point Load Cell
Single Point Load Cell YG-B Series The YG-B Series is a high performance strain gage load cell constructed of aluminum alloy. It is designed to accurately measure compression loads in capacity ranges of
More informationSENTRAN. Low Profile Load Cell. For more information call
SENTRAN Low Profile Load Cell PFSeries The PF Series is a high performance, low profile, strain gage load cell constructed of stainless steel. The PF Series is designed to accurately measure compression
More informationCFN Series Metal Foil, Current Sense Resistor
RoHS COMPLIANT* & HALOGEN FREE** Features n Metal foil n High power density n High reliability and stability n RoHS compliant* and halogen free** Applications n Current sensing n Power supplies n Stepper
More informationSolutions for the Steel Industry. Market Solutions
Solutions for the Steel Industry Market Solutions A Complete Solution BLH Nobel offers both standard and custom made systems and solutions for force, tension and weighing for the steel industry. Our solutions
More information3M Card Connector SD Normal Polarization, Push-Push, Surfacemount SD Series
M Card Connector SD Low profile, light weight, and small size Compatibility with both SD card and multimedia card formats Smooth push push eject mechanism protect switch indicator Card polarization Card
More informationSENTRAN. Low Profile Load Cell. For more information call
SENTRAN Low Profile Load Cell PASeries The PA Series is a miniature, low profile, strain gage load cell constructed of stainless steel. The PA Series is designed to accurately measure compression loads
More informationSENTRAN. Low Profile Load Cell. For more information call
SENTRAN Low Profile Load Cell PASeries The PA Series is a miniature, low profile, strain gage load cell constructed of stainless steel. The PA Series is designed to accurately measure compression loads
More informationRobust Lead Circulators and Isolators
APPLICATION NOTE Robust Lead Circulators and Isolators This Application Note describes the robust lead design for Skyworks circulators and isolators. These are high performance devices provided in low-cost
More informationLMM-H04 Mass Air Flow Sensor
Hot Film Anemometer Component Highly reliable and long term stable Uni-directional airflow measurement Fast reaction time Manufactured according ISO TS16949 Can be adapted to various flow channel geometries
More informationModel LMM-H03 Mass Air Flow Sensor
Hot Film Anemometer Component Highly reliable and long term stable Bi-directional airflow measurement Fast reaction time Manufactured according ISO TS16949 Can be adapted to various flow channel geometries
More informationDigital Self Contained Weighing Module
Model 9010D Digital Self Contained Weighing Module FEATURES Capacities 3-90kg Unique adjustable tare load cancelling mechanism Highly effective viscous damping 6 Built-in overload limit stops in three
More informationIR Sensor Module for Remote Control Systems
IR Sensor Module for Remote Control Systems TSMP77000 20953 1 2 DESIGN SUPPORT TOOLS Models Available MECHANICAL DATA 3 4 Pinning: 1, 4 = GND, 2 = V S, 3 = carrier OUT ORDERING CODE Taping: TSMP77000TT
More informationOverview. Benefits. Applications. Tantalum Through-Hole Capacitors Radial Dipped T350, T351, T352, T353, T354, T355 & T356 UltraDip II Polar
T350, T351, T352, T353, T354, T355 & T356 Ultraip II Polar Overview The KEMET Ultraip II offers quality instrument and entertainment system designs that are widely recognized and advantages inherent to
More informationMounting Method. V =Through Hole S = SMD H = Horizontal Adjust. (See note 2. (2) Horizontal adjust versions will be studied case by case
S-15 Rotary Switch FEATURES 2 and 6 positions versions (standard) SMD or Through-hole Mount Low Profile (4.4 mm) Embossed Tape (SMD) or Bulk packaging (Through hole) Reflow Soldering capability Shaft insertable
More informationIs Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC
More informationSMV LF: Hyperabrupt Junction Tuning Varactor
DATA SHEET SMV1145-079LF: Hyperabrupt Junction Tuning Varactor Applications High volume commercial systems Features Frequency linear design Low series resistance Package is rated MSL1, 260 C per JEDEC
More informationSENTRAN. For more information call
SENTRAN Low Profile Load Cell PGSeries The PG Series is a high performance, low profile, strain gage load cell constructed of heat-treated stainless steel. The PG Series is designed to accurately measure
More informationSENTRAN. Low Profile Load Cell. For more information call
SENTRAN Low Profile Load Cell PDSeries The PD Series is a high performance, low profile, strain gage load cell constructed of heat-treated alloy tool steel. The PD Series is designed to accurately measure
More information