Management Plan for Walking/Working Surfaces & Fall Protection (29 CFR , 23, 66 App.C; 29 CFR ) ISD #535
|
|
- Noel Stewart
- 6 years ago
- Views:
Transcription
1 Management Plan for Walking/Working Surfaces & Fall Protection (29 CFR , 23, 66 App.C; 29 CFR ) ISD #535 Health & Safety Office Maintenance Service Building 10 SE 9½ Street Rochester, MN
2 Management Plan for Walking/Working Surfaces and Fall Protection (29 CFR , 23, 66 App.C; 29 CFR ) Annual Review Form Table of Contents Section 1.0 Section 2.0 Section 3.0 Section 4.0 Section 5.0 Section 6.0 Section 7.0 Section 8.0 Section 9.0 Section 10.0 Section 11.0 Section 12.0 Section 13.0 Introduction Authority and References Responsibilities General Requirements for Walking/Working Surfaces Fall Protection Survey Guardrail Systems Personal Fall-Arrest Systems Training Requirements Inspections Rescue Procedures Accident Investigation Enforcement Program Evaluation Appendix A Appendix B Appendix C1 Appendix C2 Appendix C3 Appendix C4 Fall Hazard Assessment Form Training Verification Form Full-Body Harness Annual Inspection Checklist Lanyard Annual Inspection Checklist Snap Hooks / Carabiner Annual Inspection Checklist Self-Retracting Lanyard / Lifeline Annual Inspection Checklist 2
3 Document Modification Form All document modifications must be recorded on this form. Modification Date Modification Description Modifications By Purpose of Modification Approved By Annual Review Michael Stock Update M.S Annual Review Michael Stock Update M.S Changed Office Phone Number Michael Stock Update M.S Annual Review Michael Stock Update M.S Annual Review Michael Stock Update M.S Annual Review Michael Stock Update M.S Annual Review Michael Stock Update M.S. 3
4 1.0 Introduction Falls are the second leading cause of occupational fatalities and disabling injuries in the United States. Each year, over 500 workers die in fall-related accidents, and over 300,000 workers suffer a disabling injury from preventable falls. Some examples of work activities that could expose employees to fall hazards include roof repair or replacement, painting, and general maintenance work performed on elevated walking/working surfaces. Rochester Public Schools is dedicated to the protection of its employees from job related injuries. The purpose of this plan is to assist employees in recognition of workplace fall hazards and to document measures to address these hazards. Employers are able to select fall protection measures that are appropriate for the type of work performed. Fall protection can normally be provided through the use of guardrail systems and/or personal fall-arrest systems. 2.0 Authority and References OSHA standards: 29 CFR CFR CFR Appendix C 29 CFR (for construction work) 3.0 Responsibilities It is the responsibility of Rochester Public Schools to implement this Walking/Working Surfaces and Fall Protection program. Observational safety checks of work operations and enforcement of safety procedures is regularly enforced. The supervisor on-site is responsible for correcting any unsafe practices or conditions immediately. It is the district s responsibility to train all employees to understand and adhere to the procedures of this plan. It is the responsibility of the individual employee to communicate with management any unsafe or hazardous conditions that may cause injury. Each employee is required to follow these safety procedures unless they feel it would cause a greater hazard. If this is the case, employees must communicate their concerns before proceeding. 4.0 General Requirements for Walking/Working Surfaces Housekeeping: All passageways, storerooms, service rooms, and floors of workrooms are kept clean and orderly and free from protruding nails, splinters, holes, or loose boards. The floor of every workroom is maintained in a clean and, so far as possible, a dry condition. Aisles and Passageways: Permanent aisles and passageways are appropriately marked. Where mechanical handling equipment is used, sufficient safe clearances is allowed for aisles, at loading docks, through doorways and wherever turns or passage must be made. Aisles and passageways are kept clear and in good repair, with no obstruction across or in aisles that could create a hazard. Covers and Guardrails: Covers and/or guardrails are provided to protect personnel from the hazards of open pits, tanks, or other floor openings. Floor Loading: In each building used for business or storage purposes, the loads approved by the building official are marked in a conspicuous place. Rochester Public Schools does not allow a load to be placed on any floor or roof that exceeds that for which the floor or roof has been approved by the building official. 4
5 5.0 Fall Protection Survey An assessment for fall protection hazards on boilers was conducted in April 2007 by the Institute for Environmental Assessment and Structural Design Group. Employees will be notified and trained on the hazards present as soon as fall protection is put in place. When conducting the fall protection survey, the following areas that may require fall protection were considered: Unprotected sides or edges: Employees performing work on walking/working surfaces (horizontal and vertical surfaces) with an unprotected side or edge four feet or more above a lower level must be protected from falls by guardrail systems, safety nets, or personal fall-arrest systems. Leading Edges: Employees constructing or having exposure to a leading edge four feet or more above a lower level must be protected from falls by guardrail systems, safety nets or personal fall-arrest systems. A leading edge is the edge of a floor or roof or a walking/working surface that changes location as additional floor, roof, decking, or formwork sections are put into place. Walking/working surfaces not otherwise addressed: Employees working on walking/working surfaces four feet above lower levels that are not otherwise addressed above must be protected by the use of guardrails, safety nets, or fall-arrest systems. 6.0 Guardrail Systems Every floor opening, floor hole, or open-sided floor or platform four feet or greater within the district has a standard guardrail or a personal fall-arrest system in place. Guardrail systems located within the district comply with the following provisions: The height of the top rail is 42 inches above the walking/working level. When conditions warrant, the height of the top edge may exceed 45 inches provided the guardrail system meets all other design and construction criteria. Midrails, screen, mesh or intermediate vertical members are installed between the top edges of guardrails and walking/working surfaces when there are no walls or parapet walls at least 21 inches high. Guardrails are capable of withstanding a force of at least 200 pounds applied within 2 inches of the top edge in any outward or downward direction at any point along the top edge. Midrails, screen, mesh, or intermediate vertical members are capable of withstanding a force of at least 150 pounds applied in any downward or outward direction at any point along the midrail or other member. Guardrails have smooth surfaces that will prevent punctures, lacerations and snagging of clothing. The ends of top rails and midrails do not have overhang terminal posts unless an overhang would not create a projection hazard. Steel and plastic banding is not used on top rails or midrails. Top and midrails are at least 1/4 inch nominal diameter or thickness to prevent cuts and lacerations. When guardrails are used in hoisting areas, a chain, gate or removable guardrail section is placed across the access opening when hoisting operations are not taking place. When guardrails are used at holes, they are erected on all unprotected sides of edges. When guardrails are used to protect holds that are used to pass materials, not more than two sides are protected by removable guardrails. If wire rope is used for top rails, the rope is flagged at not more than 6-foot intervals with high visibility material. 5
6 7.0 Personal Fall-Arrest Systems Where guardrails are not feasible or economical, personal fall-arrest systems may be used. Fall-arrest systems used within the district comply with the following provisions: Connectors, D-Rings, and Hooks: All connectors are made from drop forged, pressed or formed steel, or made of equivalent materials and have a corrosion resistant finish. D-rings and snap hooks have a minimum tensile strength of 5,000 pounds. Only locking snap hooks are used. Anchorage: Personal fall-arrest equipment anchorage points are separate from platform anchorage points and are capable of supporting at least 5,000 pounds. Lifelines and Lanyards: Each employee is attached to a separate lifeline. All ropes and straps used in lanyards, lifelines or belts are made from synthetic fibers and have a minimum breaking point of 5,000 pounds. All self-retracting lifelines and lanyards which limit the free fall distance to 2 feet or less sustain a minimum tensile load of 3,000 pounds with the unit in the fully extended position. Any self-retracting lifeline or lanyard which does not limit free-fall distance to 2 feet or less is capable of sustaining a minimum tensile load of 5,000 pounds. Lifelines are protected from abrasions or cuts. Body belts are not acceptable as part of a personal fall-arrest system. General: All surfaces and edges are smooth to prevent damage to interfacing parts of the system. 8.0 Training Requirements Rochester Public Schools provides a training program that teaches employees who may be exposed to fall hazards how to recognize and minimize such hazards. Employees are trained in the following areas: Nature of fall hazards in the work area; Correct procedures for erecting, maintaining, disassembling, and inspecting personal fall protection systems; Use and operation of controlled access zones and guardrails, personal fall-arrest, safety net, warning line, and safety monitoring systems; Role of each employee in the safety monitoring system when the system is in use; Limitations on the use of mechanical equipment during the performance of roofing work on low-sloped roofs; Correct procedures for equipment and material handling, storage and the erection of overhead protection; Employee role in fall protection plan. Employees who complete fall protection training receive a written certification that identifies the employee trained and the date of the training and includes an official signature of the trainer (see Appendix B). Retraining is provided when necessary. 9.0 Inspections All equipment is visually inspected before each use. In addition, a quarterly inspection by a competent person is conducted using the checklists supplied in Appendix C and/or as required by manufacturer s guidelines Rescue Procedures In the event that a fall occurs on-site, local emergency services will be called immediately for rescue. If emergency services are required you must notify Mike Stock, Health & Safety Coordinator, immediately following communication with
7 11.0 Accident Investigation If a fall occurs on district property or by a district employee or student, regardless of severity of injury, an investigation is conducted by Mike Stock, Health & Safety Coordinator, or a designated health and safety consultant. In addition, this plan shall be reviewed to determine if additional practices, procedures, or training need to be implemented to prevent similar types of falls or incidents from occurring. The following documentation is completed as part of the fall investigation and program review: Interviews with staff and witnesses Employee injury/accident report Supervisor injury/accident report Evaluation of equipment in use 12.0 Enforcement Constant awareness of and respect for fall hazards and compliance with all safety rules are considered conditions of employment at Rochester Public Schools. The district reserves the right to issue disciplinary warnings to employees or students, up to and including termination or expulsion, for failure to follow the guidelines of this program Program Evaluation This walking/working surfaces and fall protection program is evaluated on an annual basis to determine effectiveness. This program will need to be re-evaluated should the type of fall protection used changes. The following criteria are used to evaluate the program s performance: Accident reports Number of accidents Management/staff compliance with program components Periodic on-site audits Staff feedback and interviews Any changes made to the plan that affect standard or specific operating procedures shall be approved by the competent person for that work activity. Employees and students shall be notified of changes to the plan prior to the beginning of work. 7
Effective Date: 14-March Table of Contents
Version: 2 Page: 1 of 10 Table of Contents 1.0 Introduction... 2 1.1 Purpose... 2 1.2 Scope... 2 1.3 Definitions... 2 2.0 Guarding of Floor Openings, Wall Openings and Holes... 3 2.1 Stairway Floor Openings...
More informationWalking/Working Surfaces
DEPAUL UNIVERSITY Walking/Working Surfaces Environmental Health & Safety May 2016 1 TABLE OF CONTENTS SECTION PAGE NO. 1.0 PURPOSE 2 2.0 RESPONSIBILITIES 2 2.1 Environmental Health and Safety 2.2 Facility
More informationFrameSAFE Site-Specific Fall Protection Plan Template. Instructions for Use DO NOT INCLUDE THIS PAGE IN YOUR MANUAL SAMPLE
FrameSAFE Site-Specific Fall Protection Plan Template Instructions for Use DO NOT INCLUDE THIS PAGE IN YOUR MANUAL Step 1: Complete Site-Specific Form Enter the site-specific information in the form on
More informationDUQUESNE UNIVERSITY SAFETY PROGRAM FOR WORKING AT ELEVATED HEIGHTS
DUQUESNE UNIVERSITY SAFETY PROGRAM FOR WORKING AT ELEVATED HEIGHTS Prepared by: Environmental Health and Safety Department TABLE OF CONTENTS Page Purpose 1 Scope 1 Responsibilities 1 Scaffolding 2 Ladders
More informationScaffolding Procedures
Procedures Purpose It is the purpose of this company in issuing these procedures to further ensure a safe workplace based on the following formal, written procedures for scaffold work. Application This
More informationBP U.S. Pipelines and Logistics (USPL) Safety Manual Page 1 of 7
Safety Manual Page 1 of 7 Scaffolds 1. Purpose This policy establishes the basic safety requirements and safe work practices for the erection, use, inspection, movement, and dismantling of scaffolding.
More informationWalking-Working Surfaces
Walking-Working Surfaces 29 CFR Part 1910 Subpart D Presented by: ETTA, OSH Division 919-807-2875 Objectives 29 CFR 1910, Subpart D In this course, we will discuss the following: Hazards Definitions General
More informationChapter 17 - Ladders and Scaffolds
Chapter 17 Ladders and Scaffolds Chapter 17 - Ladders and Scaffolds Ladders Ladders must be in good condition, made of suitable material, of proper length, and of the correct type for the use intended.
More informationFACILITIES MANAGEMENT OFFICE OF ENVIRONMENTAL HEALTH AND SAFETY AERIAL WORK PLATFORM POLICY 09/06/17 Last Revision
FACILITIES MANAGEMENT OFFICE OF ENVIRONMENTAL HEALTH AND SAFETY AERIAL WORK PLATFORM POLICY 09/06/17 Last Revision 1. Intent This program has been developed to reduce the risk of physical injury or property
More informationScaffolding Safety. Scaffolding
Scaffolding Safety Scaffolding 1926.450 - Scope, Application Covers all scaffolds used in workplaces Does not apply to crane or derrick suspended personnel platforms, which are covered by 1926.550(g) Aerial
More informationAppendix A to Subpart M of Part Determining Roof Widths. Non-mandatory Guidelines for Complying With Sec (b)(10)
[Code of Federal Regulations] [Title 29, Volume 8] [Revised as of July 1, 2003] From the U.S. Government Printing Office via GPO Access [CITE: 29CFR1926.503] [Page 331-355] TITLE 29--LABOR CHAPTER XVII--OCCUPATIONAL
More informationSCAFFOLDS Revision No: 3
PAGE 1 OF 6 1.0 PURPOSE/ SCOPE To communicate the safety requirements for the erection, inspection and safe use of scaffolds. Compliance with these requirements will assure employee safety while working
More informationSTANDARD PRACTICE INSTRUCTION
STANDARD PRACTICE INSTRUCTION DATE: March 1, 2001 SUBJECT: Scaffolding Safety Program. REGULATORY STANDARDS: 29 CFR 1910.28 Safety Requirements For Scaffolding. 29 CFR 1910.29 Manually Propelled Mobile
More informationSPECIFICATION SECTION 05515: LADDERS O Keeffe s Aluminum Ladders
Welcome to the O Keeffe s Guide Specification System prepared as an aid to specify in preparing written construction documents. For specification assistance with specific product applications, please contact
More informationScaffolding and Raised Platforms
Standard Operating Procedures Scaffolding and Raised Platforms Last Modified: JAN 2013 1 of 7 Scaffolding and Raised Platforms I Purpose To provide a guideline for personnel who work around or on stationary
More information(6) Crawl boards and ladders used for roof work shall be securely fastened over the ridge of the roof or be otherwise effectively anchored.
Newfoundland & Labrador - Terre-Neuve-et-Labrador Ladder Safety - Sécurité des échelles This material has been extracted from the Acts and Regulations of the Province to help students understand the subject.
More informationPIP STF05520 Details for Pipe Railing for Walking and Working Surfaces
TECHNICAL CORRECTION January 2017 Structural PIP STF05520 Details for Pipe Railing for Walking and Working Surfaces PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process
More informationBOOM-SUPPORTED ELEVATING WORK PLATFORM PROGRAM
Page: 1 of 7 1.0 PURPOSE and APPLICABILITY 1.1 It is the policy of the University of Pennsylvania in coordination with the Office of Environmental Health and Radiation Safety to provide the University
More informationOCCUPATIONAL HEALTH AND SAFETY ACT SCAFFOLDING REGULATIONS
c t OCCUPATIONAL HEALTH AND SAFETY ACT SCAFFOLDING REGULATIONS PLEASE NOTE This document, prepared by the Legislative Counsel Office, is an office consolidation of this regulation, current to October 28,
More informationPreventing Electrocutions:
SAFETY CORNER Preventing Electrocutions: While Working with Scaffolds Near Overhead Power Lines Warning! Workers may be electrocuted when erecting, moving, or working from metal or conductive scaffolds
More informationFACT SHEET Standard: Fall Protection
ROOFTOP FALL PROTECTION GUIDANCE EH&S acknowledges the varied nature of work on roofs, uncertain frequency of exposure, wide range of potentially hazardous conditions, and the confusion among trades groups,
More informationBASIC SCAFFOLDING KNOWLEDGE QUESTIONS
Garnsworthy Square 46, 62 & 64 Garnsworthy St Springvale rth Victoria 3171 Updated on 22/02/08 STC105 Name BASIC SCAFFOLDING KNOWLEDGE QUESTIONS THE PROFESSIONAL Scaffold Tools Scaffold Belts Couplers
More informationA REAL-WORLD VIEW: IMPLEMENTING NEW OSHA FALL PROTECTION REGULATIONS
A REAL-WORLD VIEW: IMPLEMENTING NEW OSHA FALL PROTECTION REGULATIONS Indiana Safety Conference March 2018 TRACEY RIEPENHOFF, P.E., C.S.P. LJB INC. (419) 236-7050; TRIEPENHOFF@LJBINC.COM AGENDA Background/context
More informationScissor Lift Safety for Clients and Employees or ARS
ADVANCED RESOURCE SOLUTIONS INNOVATIVE SOLUTIONS FOR PROJECT SUCCESS Scissor Lift Safety for Clients and Employees or ARS Added 1/20/2017 Employees: Guidelines addressed in OSHA 1926.451; 1926.452(w);
More informationTAMPA ELECTRIC COMPANY ENERGY SUPPLY SCAFFOLD PROGRAM
TABLE OF CONTENTS TITLE PAGE # PURPOSE / INTRODUCTION 1 RESPONSIBILITY 2 EMPLOYEE TRAINING AND DOCUMENTATION 3-4 PERIODIC PROGRAM EVALUATION 4 GENERAL SCAFFOLD ERECTING/DISASSEMBLING REQUIREMENTS 5-7 SCAFFOLDING
More informationIntroduction. Module Objective
Introduction Managing Safety and Health Time: About two hours, Objectives: 1: Explain the importance of an effective health & safety program 2: Explain worker rights to a safe & healthful workplace 3:
More informationConsequences Workers put in dangerous positions Fall
Legislations on Working at height 1 Inadequate Planning and provision for weather Misuse Unprotected edges and openings Structural elements incorrectly erected or installed Load insecurely attached These
More informationMODULAR ACCESS SYSTEMS PRODUCT OVERVIEW
PRODUCT OVERVIEW FIXFAST USA Providing maximum safety with minimum fuss to workers at height. Our extensive range of safe access products and fall protection systems are designed for industrial, commercial
More informationIntroduction. Estimated length: 30 minutes Audience: construction workers
Introduction Scaffold User Training Welcome! The purpose of this Click Safety course is to provide instruction for basic safety provisions when using scaffolds in construction activities. Estimated length:
More informationExcavation Safety Program
Excavation Safety Program Excavation, Trenching & Shoring Safety I. Purpose The purpose of this policy is to establish safe operating procedures for any earthwork or underground work that is done on a
More informationTHE NEW CRANE STANDARD
THE NEW CRANE STANDARD By Molly O Brien FDRsafety December 2012 Summary While cranes and derricks do make the movement of heavy materials much easier for workers, many safety hazards are associated with
More informationBasic Service. This Section provides information regarding a. Introduction
Basic Service Introduction This Section provides information regarding a new electric Basic Service for a single phase service less than or equal to 400 amps, and a three phase service less than 50kW.
More informationCorporate Safety Procedure Grid Mesh, Handrail and Flooring Removal. Table of Contents
Table of Contents 1. Purpose... 2 2. Scope... 2 3. Roles and Responsibilities... 2 3.1 Manager/Supervisor... 2 3.2 Workers... 2 3.3 Technical Specialist/Engineer... 2 4. Definitions... 2 5. Procedure...
More informationSECTION ORNAMENTAL ALUMINUM RAILING. ** NOTE TO SPECIFIER ** Superior Aluminum Products, Inc.; Ornamental aluminum railing products.
SECTION 05720 ORNAMENTAL ALUMINUM RAILING ** NOTE TO SPECIFIER ** Superior Aluminum Products, Inc.; Ornamental aluminum railing products. This section is based on the products of Superior Aluminum Products,
More informationDemolition Safety!!!!
Sample Written Program For Your Company For Demolition Safety Provided By: P.O. Box 2136 Slidell, LA 70458 Phone: 985-781-1444 Fax: 985-718-4957 Email: info@se-safety.com Demolition Safety Program Purpose
More information2014Construction Code: Chapter 33 Key Revisions
Robert D Alessio Department of Buildings Senior Executive Director Engineering and Safety Operations New York University-Kimmel Center Tuesday, March 24, 2015 2014Construction Code: Chapter 33 Key Revision
More informationA-Series Aluminum Gantry Crane
SPANCO PRODUCT SPECIFICATIONS 1 A-Series Aluminum Gantry Crane This guide can be used to prepare a bid specification for the incorporation of an A-Series Gantry Crane into a competitive bid project or
More informationSECTION CHAIN LINK FENCES AND GATES (GALVANIZED) A. Fence framework, fabric, gates, and accessories.
SECTION 02830 CHAIN LINK FENCES AND GATES (GALVANIZED) 1.0 GENERAL 1.1 Section Includes A. Fence framework, fabric, gates, and accessories. B. Excavation for post bases; concrete footing for posts. C.
More informationSection Subparts T. Cleveland State University Work Zone Safety and Efficiency Transportation Center. Demolition
Demolition 1926.252(a) Whenever materials are dropped more than 20 feet to any point lying outside the exterior walls of the building, an enclosed chute of wood, or equivalent material, shall be used.
More information"SUPPORTED SCAFFOLDING SAFETY IN CONSTRUCTION ENVIRONMENTS"
PRESENTER'S GUIDE "SUPPORTED SCAFFOLDING SAFETY IN CONSTRUCTION ENVIRONMENTS" Part of the "CONSTRUCTION SAFETY KIT" Series "Quality Safety and Health Products, for Today...and Tomorrow" OUTLINE OF MAJOR
More informationSAFETY POLICY AND PROCEDURE MANUAL All Euramax Subsidiaries. Number E-2.0 Safety Audits and Inspection Program
Number E-2.0 Issued: 1/2009 Revised: 12/2015 Page 1 of 2 1.0 PURPOSE: To establish a formal system to routinely self-inspect each Euramax facility in an effort to detect unsafe and/or hazardous conditions,
More informationSection 1 OBC FADS /13 Access to Parking Areas
Section 1 OBC 3.8.2.2 4.3.12/13 Access to Parking Areas A barrier-free path of travel is provided from: a) the entrance to the exterior parking area b) at least one parking level where a passenger elevator
More informationPRESCRIPTIVE COMPLIANCE METHOD
CHAPTER 3 PRESCRIPTIVE COMPLIANCE METHOD [B] SECTION 301 GENERAL 301.1 Scope. The provisions of this chapter shall control the alteration, repair, addition and change of occupancy of existing structures,
More informationSECTION SECTIONAL OVERHEAD DOORS 522 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS. Display hidden notes to specifier. (Don't know how?
SECTION 08360 SECTIONAL OVERHEAD DOORS 522 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Glazed Aluminum
More informationSPECIFYING AN O KEEFFE S LADDER
SPECIFYING AN O KEEFFE S LADDER When including an O Keeffe s Aluminum Ladder in your specification, use the following steps to choose the right ladder for your project. Step 1 Select Your Model 531 532
More informationUniversal Panels & Accessories
Universal Panels & Accessories Erection Procedures INTRODUCTION Use common sense when working with Scaffold Your Safety is our #1 Concern Universal Scaffolds are designed with your safety in mind every
More informationStandards Respecting Railway Clearances. May 14, 1992 (TC E-05)
Standards Respecting Railway Clearances May 14, 1992 (TC E-05) STANDARD RESPECTING RAILWAY CLEARANCES 1. APPLICATION OF STANDARD 1.1 This Standard shall apply on all tracks owned or operated on by a railway
More informationInstallation Manual. Orion. TL-3 Steel Barrier. VHD (v2)
Installation Manual Orion TL-3 Steel Barrier VHD (v2) 300914 Table of Contents Orion Introduction.......... 3 Limitations & Warnings. 4 Before Installation..... 3 System Design & Design Considerations
More informationResidential fall protection
Data Sheet 751 Rev. Oct. 2016 Residential fall protection This data sheet includes multi-level residences and similar structures, with and without basements. This is a best practice guide to highlight
More informationPenn State Forestland Management Office Multi-Strand High-Tensile Wire Fence Specifications
Penn State Forestland Management Office Multi-Strand High-Tensile Wire Fence Specifications 1. FENCE REQUIREMENTS Hazard Trees All hazard trees, which are within tree length of the fence, must be felled
More informationAustin Technical Manuals - Standard Specifications Preservation of Trees and Other Vegetation (610S) 03/27/2000
Austin Technical Manuals - Standard Specifications Preservation of Trees and Other Vegetation (610S) 03/27/2000 610S.1 This item shall govern the proper care and treatment of all trees and other vegetation
More informationScaffolding. Safety Guide. STOP! Before you climb
Scaffolding Safety Guide Printed FEB 2015 rebr. AUG 2016 Contents Safety Guide Disclaimer... 1 Safety Guide Objectives... 2 Roles & Responsibilities of Workplace Parties Employers, Supervisors, Workers...
More informationCONSULTING OFFICE OF MORRIS S. FARKAS PROFESSIONAL SAFETY ENGINEER
CONSULTING OFFICE OF MORRIS S. FARKAS PROFESSIONAL SAFETY ENGINEER EDUCATION 3835 East Thousand Oaks Boulevard, #365 Westlake Village, California 91362 Telephone: (805) 494-0444 Facsimile: (805) 494-0441
More informationHILLSBOROUGH TOWNSHIP CODE ENFORCEMENT
HILLSBOROUGH TOWNSHIP CODE ENFORCEMENT SAMPLE GUIDE FOR RESIDENTIAL DECKS revised 7 16 Call before you dig! 1 800 272 1000 New Jersey One Call. Utility Mark Out. THIS GENERIC GUIDE IS NOT ALL INCLUSIVE
More informationCITY OF CAMDENTON OFFICE OF THE BUILDING OFFICIAL Commercial Building & Architectural Review Permit Application
CITY OF CAMDENTON OFFICE OF THE BUILDING OFFICIAL Commercial Building & Architectural Review Permit Application DATE: / / PERMIT # REQUEST FOR: NEW BUILDING ADDITION REMODEL PLUMBING ONLY ELECTRIC ONLY
More informationSECTION CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
SECTION 08 32 20 CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationAluminum Component Pipe Railings
1 SECTION 05 7360 ALUMINUM COMPONENT PIPE RAILINGS PART 1 GENERAL 1.01 SECTION INCLUDES A. Aluminum component pipe handrails and railings. 1.02 RELATED REQUIREMENTS A. Section 02 9000: Landscaping: Installation
More informationWINSAFE Corp. OPERATING INSTRUCTIONS MODULAR BEAMS and ACCESSORIES
WINSAFE Corp. OPERATING INSTRUCTIONS MODULAR BEAMS and ACCESSORIES THESE INSTRUCTIONS MUST BE READ AND UNDERSTOOD BY ANYONE INSTALLING OR SUSPENDING EQUIPMENT FROM WINSAFE MODULAR BEAMS AND ACCESSORIES.
More informationPowered Industrial Truck/Forklift Operations Standards and Procedures. Disaster Cycle Services Standards & Procedures DCS SP DMWT
Powered Industrial Truck/Forklift Operations Standards and Procedures Disaster Cycle Services Standards & Procedures DCS SP DMWT April 2015 Change Log Date Page(s) Section Change Author: Deploy Materials,
More informationTENTS AND OTHER MEMBRANE STRUCTURES
CHAPTER 31 TENTS AND OTHER MEMBRANE STRUCTURES SECTION 3101 GENERAL 3101.1 Scope. Tents and membrane structures shall comply with this chapter. The provisions of Section 3103 are applicable only to temporary
More information4188 East Andrew Johnson Highway Morristown, TN
4188 East Andrew Johnson Highway Morristown, TN 37814 800-225-7814 education@precisionladders.com Super Simplex Disappearing Stairway Automatic Electric Disappearing Stairway Automatic Super Simplex FL
More informationREQUEST FOR ARC APPROVAL
Oceanside Terrace Condo Association c/o Sea Breeze Community Management Services, Inc. 4227 Northlake Boulevard Palm Beach Gardens, FL 33410 (561) 626-0917 Fax: (561) 626-7143 www.seabreezecms.com REQUEST
More informationOCCUPATIONAL STANDARD (For use in the development of supply chain related job descriptions, performance evaluations, career development plans, etc.
OCCUPATIONAL STANDARD (For use in the development of supply chain related job descriptions, performance evaluations, career development plans, etc.) Material Handler Position: MOBILE AERIAL WORK Portable
More informationDate Prepared: Location: Time: Approximate Temperature (degrees F): Weather Conditions: Project Name:
Appendix C Hazard Assessment and Trench Entry and Authorization Form for regularly scheduled and emergency trenching activities Date Prepared: Location: Time: Approximate Temperature (degrees F): Weather
More informationCLIMA AGR. Mobile Aluminium Tower with Climbing Frames 1450/850 Camlock Advanced Guardrail USER GUIDE
CLIMA AGR Mobile Aluminium Tower with Climbing Frames 1450/850 Camlock Advanced Guardrail USER GUIDE Contents Safety First Safety Checklist Quantity Schedules Assembly and Dismantling Procedure Toe Boards
More informationSCAFFOLD REQUIREMENTS
SCAFFOLD REQUIREMENTS Steingass Mechanical Contracting, Inc. 754 Progress Drive Medina, Ohio 44256 (330) 725-6090 SCAFFOLDS INTRODUCTION The Occupational Safety and Health Act under 29 CFR 1926 Subpart
More informationANSI/ ASME HST Performance Standard For Overhead Electric Wire Rope Hoists
SECTION 412213- BRIDGE CRANES Part 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationRead Only Copy Not For Distribution. Chapter 17. Private Potable Water Supply Systems 17.1 GENERAL REGULATIONS 17.2 QUANTITY OF WATER REQUIRED
Chapter 17 Private Potable Water Supply Systems 17.1 GENERAL REGULATIONS 17.1.1 Applicability The regulations in this chapter apply to any private potable water supply system where plumbing fixtures are
More informationAdministrative Changes
Revised 11/29/06 Knox County Residential Building Codes Significant Changes From The 1995 CABO One And Two Family Dwelling Code To The 2006 International Residential Code All one and two family dwellings
More informationF.A.C.E. INVESTIGATION REPORT
F.A.C.E. INVESTIGATION REPORT Fatality Assessment and Control Evaluation Project FACE #97-NJ-067-01 Iron Worker Dies After Falling 26 Feet From a Steel Beam New Jersey Department of Health and Senior Services
More informationEM385 Construction Safety and Health Certification Course Section 14 Material Handling, Storage, and Disposal
EM385 Construction Safety and Health Certification Course Section 14 Material Handling, Storage, and Disposal OSHAcademy Course 502 Study Guide EM 385 SAFETY AND HEALTH CERTIFICATION COURSE - SECTION 14
More informationE-Series Steel Gantry Crane
SPANCO PRODUCT SPECIFICATIONS 1 E-Series Steel Gantry Crane This guide can be used to prepare a bid specification for the incorporation of an E-Series Gantry Crane into a competitive bid project or application.
More information(7 February 2014 to date) OCCUPATIONAL HEALTH AND SAFETY ACT 85 OF 1993
(7 February 2014 to date) OCCUPATIONAL HEALTH AND SAFETY ACT 85 OF 1993 (Gazette No. 14918, Notice No. 1158, dated 2 July 1993. Commencement date: 1 January 1994, except section 1(3): to be proclaimed)
More informationINTERIOR FINISHES CHAPTER 8
CHAPTER 8 INTERIOR FINISHES SECTION 801 GENERAL 801.1 Scope. Provisions of this chapter shall govern the use of materials used as interior finishes, trim and decorative materials. 801.1.1 Interior finishes.
More informationSafety on Heights: Our Policy
11/17/14 Safety on Heights: Our Policy Only volunteers over the age of 18 are allowed to work on heights of more than six feet off the ground. This includes all work on scaffolds. Only volunteers who are
More informationFACT SHEET #2 DECK INFORMATION
Borough of Doylestown Building and Zoning Department 57 West Court Street, Doylestown, PA 18901 215.345.4140 FACT SHEET #2 DECK INFORMATION BACKGROUND The provisions of the PAUCC. ICC Property Maintenance
More informationSmarter. Safer. Leaner.
Smarter. Safer. Leaner. Fast Installation and Removal Decrease Leading Edge Exposure by 87% OSHA Compliant Versatile and Reusable Use Perimeter Protection Posts During Construction: At Building Perimeter
More informationIronworker Safety Director Training Course. Steve Rank Executive Director of Safety and Health
Ironworker Safety Director Training Course Steve Rank Executive Director of Safety and Health Providing Opportunities for Ironworkers and Company Safety Personnel to Learn New Skills-Sets and Manage Comprehensive
More informationINDUSTRIAL GUARDRAIL SYSTEMS
INDUSTRIAL GUARDRAIL SYSTEMS STRONGEST GUARDRAIL ON THE MARKET MANUFACTURED IN THE U.S.A. BEST PRICES MOST VARIETIES HEAVY DUTY ONE-LINE OR TWO-LINE Posts: 4 Sched 80 pipe Rail: 6 Sched 40 pipe Sleeved
More informationSeries - 1
SECTION 08360 SECTIONAL OVERHEAD DOORS 521 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word
More informationThis guide can be used to prepare a specification for incorporating free standing jib cranes into a competitively bid construction project.
SECTION 14651 FREE STANDING JIB CRANE ***** Gorbel, Inc. manufacturers a broad range of material handling cranes including monorail, bridge, gantry, and jib cranes. Numerous work station and industrial
More informationWritten Safety and Health Program
Written Safety and Health Program For XYZ Company Required for all Hawaii Businesses with 25 or More Employees Incorporates Provisions of Hawaii Administrative Rules Title 12, Subtitle 8, Part 2, Chapter
More informationInteragency Aviation Safety Alert
Interagency Aviation Safety Alert No. IASA 12-01 Revision 1 Subject: Area of Concern: Distribution: June 18, 2012 Page 1 of 3 REVISED Helicopter Cargo Hauling Equipment This replaces the previous version
More informationEXCEL MODULAR STANDARD SCAFFOLD COMPONENT TECHNICAL MANUAL
EXCEL MODULAR STANDARD SCAFFOLD COMPONENT TECHNICAL MANUAL EMSLC-TSM-1001 Engineering Approval: Lance Smith Manual Release Date: 04/25/2017 Release Authorization: ECN EMSLC-0191 Revision: AK TABLE OF
More informationScaffolds. (Owner: Personnel Safety Section Supervisor)
BTCP/BTRF Scaffolds (Owner: Personnel Safety Section Supervisor) Site Safety Standard No. 4130 Introduction Scope This standard covers general safe practices that must be followed in the erection and use
More informationPersonal Protective Equipment (PPE) Safety Program
Personal Protective Equipment (PPE) Safety Program ENVIRONMENTAL HEALTH & SAFETY pg. 1 Table of Contents A. Introduction And Purpose... 4 B. Background... 4 C. Policy... 4 D. Personal Protective Equipment
More informationREAD ONLY. Adopting Agency BSC SFM. Adopt Entire Chapter Adopt Entire Chapter as amended (amended sections listed below)
CALIFORNIA PLUMBING CODE MATRIX ADOPTION TABLE APPENDIX C - ALTERNATE PLUMBING SYSTEMS (Matrix Adoption Tables are non-regulatory, intended only as an aid to the user. See Chapter 1 for state agency authority
More informationTENTS AND MEMBRANE STRUCTURES
CHAPTER 24 TENTS AND MEMBRANE STRUCTURES SECTION 2401 GENERAL 2401.1 Scope. Tents and membrane structures shall comply with this chapter. The provisions of Section 2403 are applicable only to temporary
More informationSECTION 1043 FENCE MATERIAL
SECTION 1043 FENCE MATERIAL 1043.1 Scope. This specification covers the material required in the construction of chainlink fence and woven wire fence. 1043.2 Basis of Acceptance. The basis of acceptance
More informationMonthly Workplace Safety and Health Self-Inspection WAREHOUSES FACILITY FOR MONTH OF INSPECTED BY DURATION OF INSPECTION DATE / TIME
Monthly Workplace Safety and Health Self-Inspection WAREHOUSES FACILITY FOR MONTH OF INSPECTED BY DURATION OF INSPECTION DATE / TIME INSTRUCTIONS: This checklist is intended to help focus attention on
More informationMATERIAL HANDLING, STORAGE, AND DISPOSAL
SECTION 14 MATERIAL HANDLING, STORAGE, AND DISPOSAL 14.A MATERIAL HANDLING 14.A.01 Employees shall be trained in and shall use safe lifting techniques. 14.A.02 Requirements for PPE are covered in Section
More informationMaterials Handling, Storage, and Disposal
Materials Handling, Storage, and Disposal Material Handling 14.A.01 - Employees shall be trained in and shall use safe lifting techniques. 14.A.03 - Material handling devices shall be available for material
More informationFORKLIFT OPERATOR SAFETY
Table of Contents SECTION 1. TRAINING PROGRAM INTRODUCTION..................3 Training Objectives...........................................3 Rationale for Training.........................................3
More informationSupplemental Concrete Tilt Up Retrofit Plan Check Correction Sheet (2014 LABC)
Supplemental Concrete Tilt Up Retrofit Plan Check Correction Sheet (2014 LABC) Plan Check Submittal Date: Plan Check / PCIS App #: Job Address: Applicant: P.C. Engineer: (Print first / last name) Phone:
More information!!! Sample Written Program For Your Company!!! Excavation Safety. 29 CFR 1926, Subpart P !!!!! Provided By:
Sample Written Program For Your Company Excavation Safety Provided By: 29 CFR 1926, Subpart P P. O. Box 2136 Slidell, LA 70458 Phone: 985-781-1444 Fax: 985-718-4957 Email: info@se-safety.com 29 CFR 1926,
More informationSawmill Safety & Health. Presented By: John Boysen Safety Consultant OHSA Consultation Program
Sawmill Safety & Health Presented By: John Boysen Safety Consultant OHSA Consultation Program Objectives To gain awareness of the OSHA requirements. To understand how to apply those requirements. To understand
More informationSECTION PLATE CONNECTED WOOD TRUSSES
SECTION 06173 PLATE CONNECTED WOOD TRUSSES PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Shop fabricated wood trusses for roof and floor framing. 2. Bridging, bracing, and anchorage. B. Related Sections:
More informationPIP STE05501 Fixed Ladders and Cages Design Guide
TECHNICAL CORRECTION January 2017 Structural PIP STE05501 Fixed Ladders and Cages Design Guide PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities,
More informationTOWN OF DEWITT PLANNING AND ZONING PERMIT REQUIREMENTS FOR DECKS
TOWN OF DEWITT PLANNING AND ZONING PERMIT REQUIREMENTS FOR DECKS 1) Copy of survey within ten years showing all structures, property lines and deck location drawn to scale. SURVEYS REDUCED IN SIZE ARE
More information