Factors Governing Life of High-Energy Lithium-Ion Cells
|
|
- Michael Osborne
- 6 years ago
- Views:
Transcription
1 Factors Governing Life of High-Energy Lithium-Ion Cells D.P. Abraham IBA 2013 March 11, 2013 Barcelona, Spain
2 Research sponsors are both Government and Private Sector 2
3 Diagnostics Overview Use of characterization tools (electrochemical, physicochemical, mechanical, acoustic) to explain the electrochemical behavior of materials, electrodes, and cells Every part of the cell is examined electrodes (active and inactive components in coating, current collector, tabs), electrolyte, separator, etc. To identify constituents and mechanisms responsible for cell performance and performance degradation To recommend solutions that improve performance and minimize performance degradation of materials, electrodes, and cells 3
4 Electrochemical couples examined ATD-1 LiNi 0.8 Co 0.2 O 2 /MCMB-6 graphite HEV ATD-2 LiNi 0.8 Co 0.15 Al 0.05 (Al 0.1 )O 2 /Mag-10 graphite HEV 150 Wh/kg ATD-3 Li 1.04 Ni 1/3 Mn 1/3 Co 1/3 O 2 /MCMB-10 graphite HEV ABR-1 Li 1.2 Ni 0.15 Mn 0.55 Co 0.1 O 2 /A-12 graphite PHEV 300 Wh/kg 0.5Li 2 MnO 3 0.5LiNi Mn Co 0.25 O 2 Integration and interconnection of LiMO 2 -like (rhombohedral) and Li 2 MnO 3 (monoclinic) structures at atomic level EC:EMC (3:7 by wt.) + 1.2M LiPF 6 electrolyte 4
5 LiMO 2 (M=Ni,Co,Al) Crystal Structure TM O Li O TM Li atoms enter and exit through edge planes (2-D motion) c c a Li 2 MnO 3 = Li(Li 1/3 Mn 2/3 )O 2 Z-contrast STEM images that show Li ordering in TM planes of Li 2 MnO 3 D.P. Abraham, Advanced Materials 22 (2010)
6 Electronic conductivity of ABR-1 oxide powder is more than 3 orders of magnitude lower than that of NCA, and about 2 orders of magnitude lower than that of NMC 1.E x 10-3 Oxide Composition Conductivity, S/cm 1.E-04 1.E-05 1.E x 10-5 NCA LiNi 0.8 Co 0.15 Al 0.05 O 2 NMC333 Li 1.04 Ni 1/3 Mn 1/3 Co 1/3 O 2 NMC992 Li 1+x Ni 0.45 Mn 0.45 Co 0.1 O 2 HE5050 Li 1.2 Ni 0.15 Mn 0.55 Co 0.1 O 2 5 x x E-07 NCA NMC333 NMC992 HE5050 W. Lu, Argonne Electrode preparation with HE5050 oxide powder is expected to be more challenging than that for NCA and NMC333 oxide powders 6
7 Chemistry of ABR-1 cells Li 1.2 Ni 0.15 Mn 0.55 Co 0.1 O 2 = 0.5Li 2 MnO 3 0.5LiNi Mn Co 0.25 O 2 ABR-1S(+) Positive Electrode: 86%wt Li 1.2 Ni 0.15 Mn 0.55 Co 0.1 O 2 8%wt Solvay 5130 PVDF binder 4%wt Timcal SFG-6 graphite 2%wt Timcal Super P ABR-1S(-) Negative Electrode: 89.8 %wt ConocoPhillips A12 graphite 6%wt KF-9300 Kureha PVDF binder 4 %wt Timcal Super P 0.17 %wt Oxalic Acid 6.64 mg/cm 2 active-material loading density 5.61 mg/cm 2 active-material loading density 37.1% electrode porosity 26% electrode porosity 35-µm-thick coating 40-µm-thick coating 15-µm-thick Al current collector 1 µm 10-µm-thick Cu current collector 5 µm B. Polzin, A. Jansen Argonne Oxide primary particles consist of randomly oriented plate-like grains A12 graphite particles, potato-shaped morphology; surface-treated D. Miller, Argonne 7
8 Identifying sources of performance degradation is the first step to designing long-life cells Significant impedance rise during cell cycling/aging Arises mainly from the positive electrode Significant capacity fade during cell cycling/aging Originates at the positive electrode Manifests itself at the negative electrode thick negative electrode SEI Voltage profile changes observed during cell cycling/aging Arises from crystal structure changes 8
9 Positive electrode has to be cycled over a wider voltage window to obtain higher capacities ABR-1 Cell oxide activation 268 mah/goxide Cell Voltage, V % 90 mah/goxide 92% mah/goxide V, 1 st cycle 2 4.6V, 1 st cycle Cell Capacity, mah/cm mah/goxide NCA(+)/Gr(-) cells yield a discharge capacity of 165 mah/g (3-4.1V) NMC333(+)/Gr(-) cells yield a discharge capacity of 140 mah/g (3-4.1V) Ref: Li et al., J. Electrochem. Soc. 160 (2013) A3006 9
10 Cells show capacity loss on aging After 30 cycling in the V voltage window up to 1500 cycles Cell capacity decreases on cycling, even at 30 C Formation Initial 100 cycles 400 cycles 800 cycles 1200 cycles 1500 cycles 4 Full Cell Voltage, V mah/goxide mah/goxide Capacity Loss Offset Cell Capacity, mah/cm 2 Performance degradation is faster at higher upper-cutoff voltages, at higher temperatures, and for wider voltage windows Ref: Li et al., J. Electrochem. Soc. 160 (2013) A
11 Cells show impedance rise on aging After 30 cycling in the V voltage window up to 1500 cycles FULL Z(Im), Ω-cm Z(Re), Ω-cm V, 30 C 100KHz-10mHz Mid-frequency arc increases when the UCV is higher (4.6V for example) Capacity data obtained at high rates is strongly affected by cell impedance Ref: Li et al., J. Electrochem. Soc. 160 (2013) A
12 Full cell impedance increase is mainly from the positive electrode D. Dees, A. Jansen Argonne S P N RE Oxide-carbon khz 40 -Z(Im), Ω-cm Oxideelectrolyte 0.6 Hz khz POS 5 NEG Z(Re), Ω-cm Z(Re), Ω-cm 2 The positive electrode impedance rise arises from the oxide-carbon (highfrequency arc) and oxide-electrolyte (mid-frequency arc) interfaces. Ref: Li et al., J. Electrochem. Soc. 160 (2013) A
13 Data from harvested electrodes (vs. Li) shows that positive electrode contribution to true capacity fade is small V vs. Li, 30 C, 7.5 ma/g 4.0 Voltage, V Voltage Fade Fresh Characterization 300 cycles 1500 cycles Capacity, mah/g The small capacity loss could be due to oxide particle isolation that may result from loss of electronic connectivity (loss of oxide-carbon contact) or ionic connectivity (particle surface films or surface structure changes) Ref: Li et al., J. Electrochem. Soc. 160 (2013) A
14 Data from harvested negative electrodes (vs. Li) shows that the graphite bulk is not damaged by cycling/aging Fresh Characterization 300 cycles 1500 cycles V vs. Li, 30 C, 6.8 ma/g enlarged Voltage, V Capacity, mah/g The small capacity loss could be due to active particle isolation that may result from thick SEI films Ref: Li et al., J. Electrochem. Soc. 160 (2013) A
15 Cells containing the Li 4 Ti 5 O 12 (-) electrodes (coupled with the baseline positive electrode) show negligible capacity fade on cycling: V, 30 C ~235 mah/g Capacity, mah/cm ~180 mah/g C/10 ~C/ Coulombic Efficiency, % ABR-1S(+)//LTO(-) Discharge Capacity Pos. cycling ~ V vs. Li Coulombic Efficiency Cycle Number These data confirm that the graphite-based negative electrode is the main contributor to capacity fade in our baseline cells 20 Ref: Li et al., J. Electrochem. Soc. 160 (2013) A
16 SEI formation/dissolution/reformation reactions during cell cycling results in Li trapping 1 µm Fresh 1 µm 1500 cycles SuperP graphite Transition metals (Mn, Ni, Co) from the oxide(+) electrode accumulate at the graphite(-) electrode and are believed to accelerate capacity fade Ref: Li et al., J. Electrochem. Soc. 160 (2013) A
17 Positive and Negative Electrodes were reconstituted by altering oxide/carbon/binder ratios and calendaring conditions Electrodes were prepared at CFF in 2012 Electrodes were prepared at CFF in 2012 L7(C45+) A002 (CFF) Positive Electrode: Negative Electrode: 92 wt% Li 1.2 Ni 0.15 Mn 0.55 Co 0.1 O 2 (HE5050) 91.8 %wt ConocoPhillips: CGP-A12 graphite 4 wt% Solvay 5130 PVDF binder 6%wt KF-9300 Kureha PVDF binder 4 wt% Timcal C45 2 %wt Timcal C %wt Oxalic Acid 5.89 mg/cm 2 active-material loading density 5.16 mg/cm 2 A12 graphite loading density 36.1% electrode porosity 38.8% electrode porosity 26-µm-thick coating 43-µm-thick coating 20-µm-thick Al current collector 10-µm-thick Cu current collector Only 4wt% carbons and 4 wt% binder Only 2 wt% carbons Electrolyte: EC:EMC (3:7 by wt.) + 1.2M LiPF 6 Separator: Celgard 2325 B. Polzin, S. Trask, A. Jansen, Argonne 17
18 Related to information from previous slide By modifying electrode constitution and by using electrode additives we can dramatically reduce cell impedance rise -Z(Im), ASI Initial 50X 100X 300X 500X 700X 900X 1000X Full Cell: L7(C45)+/A V, 30 C ~C/2, 1000 cycles 2 wt% LiDFOB added to baseline electrolyte Z(Re), ASI Cell impedance rise is reduced by an order of magnitude (relative to baseline cell chemistry) 18
19 XPS data show that LiDFOB generates surface films on the positive electrode that inhibits cell impedance rise pristine cathode Formed_Gen2 Aged_Gen2 Formed_2wt% LiDFOB Aged_2wt% LiDFOB C1s O1s Pristine cathode Formed_Gen2 Aged_Gen2 Formed_2wt% LiDFOB Aged_2wt%LiDFOB oxide C-F (PVdF) Binding Energy, ev Binding Energy, ev Our data indicate that LiDFOBalso reduces on the graphite negative electrode, enhances the negative electrode SEI, and inhibits cell capacity fade Ref: Zhu et al., J. Electrochem. Soc. 159 (2012) A
20 Alumina-coating of positive electrode and/or alumina addition to positive electrode improves cell capacity retention Normalized Capacity no coating ABR-1S(+)/(-) 0.4nm coating on positive electrode ALD-coated electrodes Electrode coating thickness is an estimate based on the thickness measured on a planar Si substrate nm coating on positive electrode 3.4nm coating on positive electrode 5wt.% Al2O3 added to positive electrode Full Cells, V 30 C, ~C/3 rate Cycle Number Alumina reduces dissolution of Mn, Ni, and Co from the positive electrode by acting as a HF-getter. Incorporation of Al-bearing species may further help stabilize the SEI. Ref: Bettge et al., J. Power Sources 233 (2013)
21 Positive electrode potential fades on cycling Open Circuit Voltag, V vs. Li/Li GITT ~C/250, 0.16mA (charge 10 min., rest 100 mins.) ABR-1(+) vs. Li, 2 4.7V, 20 ma/g 2-4.7V, after 2X 2-4.7V, after 80X Capacity, mah/cm2 Voltage Fade not a kinetic phenomenon Voltage Fade (VF) is non-uniform VF on charge is greater than that on discharge Voltage fade is accelerated by higher temperature/upper cutoff voltage 21
22 Voltage profile changes on cycling caused by intermixing of Li and TM atoms Fresh sample Li(Li0.2Mn0.4Co0.4)O2 Cycled sample Transition Metal planes TM in Li planes Li-Mn ordering in TM planes results in Li2MnO3-like and LiCoO2-like areas Periodic intensity in Li layers is characteristic of spinel structure Z-contrast STEM 22 Abraham, Chem. Mater. 23 (2011)
23 Approaches to designing long-life cells Significant impedance rise during cell cycling/aging Can be reduced by reformulating positive electrode constitution, modifying oxide surface through coatings (pre-treatment), using electrolyte additives (in-situ), and by altering the cycling window Significant capacity fade during cell cycling/aging Can be minimized by fixing problems at the positive electrode, such as transition metal dissolution from the oxide Voltage profile changes observed during cell cycling/aging Solutions may include oxide surface modification, alternative synthesis techniques, oxide composition modification 23
24 Acknowledgements Support for this work is from DOE-EERE, Office of Vehicle Technologies Peter Faguy, Dave Howell, Tien Duong Argonne colleagues ABR collaborators National Lab colleagues & University Collaborators The presentation has been created by UChicagoArgonne, LLC, Operator of Argonne National Laboratory ( Argonne ). Argonne, a U.S. Department of Energy Office of Science Laboratory, is operated under Contract No. DE-AC02-06CH
Supporting Information. Oxidation State of Cross-over Manganese Species on the Graphite Electrode of Lithium-ion Cells
Electronic Supplementary Material (ESI) for Physical Chemistry Chemical Physics. This journal is The Royal Society of Chemistry 2014 Supporting Information Oxidation State of Cross-over Manganese Species
More informationAll-solid-state Li battery using a light-weight solid electrolyte
All-solid-state Li battery using a light-weight solid electrolyte Hitoshi Takamura Department of Materials Science, Graduate School of Engineering, Tohoku University Europe-Japan Symposium, Electrical
More informationElectrochemical performance of lithium-rich layered oxides for
IBA 2013 Electrochemical performance of lithium-rich layered oxides for electric vehicle applications Jay Hyok Song, Andrei Kapylou, Chang Wook Kim, Yong Chan You, and Sun Ho Kang* SAMSUNG SDI Contents
More informationCrystal structure, electronic structure, chemical bonding and defects in metal-ion battery materials
Crystal structure, electronic structure, chemical bonding and defects in metal-ion battery materials Artem Abakumov Center for Electrochemical Energy Storage, Skoltech Li-ion batteries Li x C 6 graphite
More informationTailor Made Carbon and Graphite Based Anode Materials for Lithium Ion Batteries. Heribert Walter, Battery+Storage 2013
Tailor Made Carbon and Graphite Based Anode Materials for Lithium Ion Batteries Heribert Walter, Battery+Storage 2013 Agenda SGL Group at a Glance Anode Materials Overview Material Synthesis and Modification
More informationOla Nilsen, Yang Hu, Jonas Sottmann, Knut B. Gandrud, Pushpaka Samarasingha, Annina Moser, Helmer Fjellvåg. Electrons in motion
Ola Nilsen, Yang Hu, Jonas Sottmann, Knut B. Gandrud, Pushpaka Samarasingha, Annina Moser, Helmer Fjellvåg Electrons in motion NAFUMA Nanostructured Functional Materials Cathode Electrolyte Anode NAFUMA
More informationSummer School June 2-4 th 2015
MAT4BAT Advanced materials for batteries Summer School June 2-4 th 2015 «Electrode formulation and processing» Dane Sotta (CEA-Liten, France) Mat4Bat Summer School Dane Sotta (CEA) June 3 rd 2015 1 Outline
More informationCycle life performance of lithium-ion pouch cells
Journal of Power Sources 158 (2006) 679 688 Cycle life performance of lithium-ion pouch cells Karthikeyan Kumaresan, Qingzhi Guo, Premanand Ramadass, Ralph E. White Department of Chemical Engineering,
More informationBATTERY SOLUTIONS WITH KYNAR PVDF LITHIUM-ION FOCUS
BATTERY SOLUTIONS WITH KYNAR PVDF LITHIUM-ION FOCUS BY 2025, THE WORLD WILL MANUFACTURE 8 BILLION LI-ION CELLS Continued market growth requires rapid advances in higher energy density, higher performance
More informationSolef. Solef PVDF Aqueous Dispersions. for Lithium Batteries
Solef Solef PVDF Aqueous Dispersions for Lithium Batteries Innovative Polymerization Technology Solef PVDF is a partially fluorinated, semi-crystalline polymer with excellent thermo-mechanical and chemical
More informationLower Cost Higher Performance Graphite for LIBs. Prepared by: Dr. Edward R. Buiel President and CEO Coulometrics, LLC. Date: March 23, 2017
Lower Cost Higher Performance Graphite for LIBs Prepared by: Dr. Edward R. Buiel President and CEO Coulometrics, LLC. Date: March 23, 2017 Outline Company overview Review of natural graphite resources
More informationto enable Lithium metal electrodes IBA2013, Barcelona, Spain
Fluorine free ionic liquid electrolytes to enable Lithium metal electrodes IBA2013, Barcelona, Spain A. S. Best, Martin (Hyun Gook) YOON, G. H. Lane, Y. Shekibi, P. C. Howlett, M. Forsyth & D. R. MacFarlane
More informationMethods for Successful Cycling of Alloy
Methods for Successful Cycling of Alloy Negative Electrodes in Li-ion ion Cells Mark Obrovac, Leif Christensen, Larry Krause, Dinh Ba Le, Jagat Singh, Kevin Eberman, Lowell Jensen, Li Liu, Jehwon Choi,
More informationThe below identified patent application is available for licensing. Requests for information should be addressed to:
DEPARTMENT OF THE NAVY OFFICE OF COUNSEL NAVAL UNDERSEA WARFARE CENTER DIVISION 1176 HOWELL STREET NEWPORT Rl 02841-1708 IN REPLY REFER TO Attorney Docket No. 300139 15 December 2017 The below identified
More informationEMA4303/5305 Electrochemical Engineering Lecture 05 Applications (1)
EMA4303/5305 Electrochemical Engineering Lecture 05 Applications (1) Prof. Zhe Cheng Mechanical & Materials Engineering Florida International University Corrosion Definition Electrochemical attack of metals
More informationIn-situ Study of Solid Electrolyte Interphase on Silicon Electrodes using PeakForce Tapping Mode AFM in Glove-box
General Motors R&D BROWN UNIVERSITY In-situ Study of Solid Electrolyte Interphase on Silicon Electrodes using PeakForce Tapping Mode AFM in Glove-box A. Tokranov 1, X. Xiao 2, C. Li 3, S. Minne 3 and B.
More informationEffect of Concentrated Electrolyte on High Voltage Aqueous Sodium-ion Battery
Effect of Concentrated Electrolyte on High Voltage Aqueous Sodium-ion Battery Kosuke Nakamoto, Ayuko Kitajou*, Masato Ito* and Shigeto Okada* (IGSES, Kyushu University, *IMCE, Kyushu University) Oct 6.
More informationIn Situ IonicÕElectric Conductivity Measurement of La 0.55 Li 0.35 TiO 3 Ceramic at Different Li Insertion Levels
A1196 Journal of The Electrochemical Society, 151 8 A1196-A1201 2004 0013-4651/2004/151 8 /A1196/6/$7.00 The Electrochemical Society, Inc. In Situ IonicÕElectric Conductivity Measurement of La 0.55 Li
More informationM 3 PO 4 2 -Nanoparticle-Coated LiCoO 2 vs LiCo 0.96 M 0.04 O 2 M = Mg and Zn on Electrochemical and Storage Characteristics
0013-4651/2008/155 3 /A201/5/$23.00 The Electrochemical Society A201 M 3 PO 4 2 -Nanoparticle-Coated LiCoO 2 vs LiCo 0.96 M 0.04 O 2 M = Mg and Zn on Electrochemical and Storage Characteristics Junho Eom
More informationElectronic Supporting Information
Electronic Supplementary Material (ESI) for Physical Chemistry Chemical Physics. This journal is the Owner Societies 2017 Electronic Supporting Information Copyright Royal Society of Chemistry, London,
More informationECEN5017 Guest Lecture
ECEN5017 Guest Lecture Overview of NREL Battery Lifetime Models & Health Management R&D for Electric Drive Vehicles Kandler Smith kandler.smith@nrel.gov Ahmad A. Pesaran ahmad.pesaran@nrel.gov Center for
More informationElectroactive Polymer for Controlling Overcharge in Lithium-Ion Batteries
PSI-SR-1261 Electroactive Polymer for Controlling Overcharge in Lithium-Ion Batteries A. Newman R. Pawle K. White J. Lennhoff A. Newman, R. Pawle, K. White, J. Lennhoff, "Electroactive Polymer for Controlling
More informationLi-ion batteries a family of chemistries with many possibilities
Li-ion batteries a family of chemistries with many possibilities Kristina Edström * Department of Chemistry The Ångström Laboratory 1 Billion Cars in 2010 and and 1.3 Millions accidents on the roads! >
More informationPVP-Functionalized Nanometer Scale Metal Oxide Coatings for. Cathode Materials: Successful Application to LiMn 2 O 4 Spinel.
PVP-Functionalized Nanometer Scale Metal Oxide Coatings for Cathode Materials: Successful Application to LiMn 2 O 4 Spinel Nanoparticles Hyesun Lim, Jaephil Cho* Department of Applied Chemistry Hanyang
More informationEffect of Porosity on the Thick Electrodes for High Energy Density Lithium Ion Batteries for Stationary Applications
batteries Article Effect of Porosity on the Thick Electrodes for High Energy Density Lithium Ion Batteries for Stationary Applications Madhav Singh 1, *, Jörg Kaiser 2, and Horst Hahn 1,3, 1 Institute
More informationSingle-crystalline LiFePO 4 Nanosheets for High-rate Li-ion Batteries
/8 SUPPORTING INFORMATION Single-crystalline LiFePO 4 Nanosheets for High-rate Li-ion Batteries Yu Zhao, Lele Peng, Borui Liu, Guihua Yu* Materials Science and Engineering Program and Department of Mechanical
More informationIBM Almaden June 27, Seongmin Ha, Dongho Koo, Kyu Tae Lee * Chemical and Biological Engineering Seoul National University
IBM Almaden June 27, 2017 Seongmin Ha, Dongho Koo, Kyu Tae Lee * Chemical and Biological Engineering Seoul National University (ktlee@snu.ac.kr) 1) Introduction 2) Failure mechanism of a redox mediator
More informationSOLIK Li-hochleitende Keramiken für all-solid-state Batterien
SOLIK Li-hochleitende Keramiken für all-solid-state Batterien Dr. Ningxin ZHANG Electric Drive Technologies Center for Low-Emission Transport Austrian Institute of Technology GmbH Outline Basic Data Project
More informationAPPLICATION OF CERAMIC TECHNOLOGIES IN ALL SOLID STATE BATTERIES
APPLICATION OF CERAMIC TECHNOLOGIES IN ALL SOLID STATE BATTERIES Mareike Wolter, Kristian Nikolowski, Katja Wätzig, Jochen Schilm, Uwe Partsch Expertise in ceramics Energy and Environmental Technologies
More informationRoles of Fluorine-doping in Enhancing Initial Cycle Efficiency and SEI Formation of Li-, Al-cosubstituted Spinel Battery Cathodes
384 Bull. Korean Chem. Soc. 2013, Vol. 34, No. 2 Cao Cuong Nguyen et al. http://dx.doi.org/10.5012/bkcs.2013.34.2.384 Roles of Fluorine-doping in Enhancing Initial Cycle Efficiency and SEI Formation of
More informationUnderstanding Cation-Disordered Cathode Materials Based on Percolation Theory and Ligand Field Theory
2016 ECS Prime meeting (10/5/2016, 8:40 9:00 am) Understanding Cation-Disordered Cathode Materials Based on Percolation Theory and gand Field Theory Jinhyuk Lee, Dong-Hwa Seo, Alexander Urban, Gerbrand
More informationIonic Conductivity and Solid Electrolytes II: Materials and Applications
Ionic Conductivity and Solid Electrolytes II: Materials and Applications Chemistry 754 Solid State Chemistry Lecture #27 June 4, 2003 References A. Manthiram & J. Kim Low Temperature Synthesis of Insertion
More informationStorage Characteristics of LiNi 0.8 Co 0.1+x Mn 0.1 x O 2 (x = 0, 0.03, and 0.06) Cathode Materials for Lithium Batteries
0013-4651/2008/155 3 /A239/7/$23.00 The Electrochemical Society A239 Storage Characteristics of LiNi 0.8 Co 0.1+x Mn 0.1 x O 2 (x = 0, 0.03, and 0.06) Cathode Materials for Lithium Batteries Junho Eom,
More informationA Microfabricated Nickel-Hydrogen Battery Using Thick Film Printing Techniques. Ohio 44106, USA
10.1149/1.2209349, copyright The Electrochemical Society A Microfabricated Nickel-Hydrogen Battery Using Thick Film Printing Techniques W. G. Tam a, and J. S. Wainright a a Department of Chemistry Engineering,
More informationFacile, mild and fast thermal-decomposition reduction of graphene oxide in air and its application in high-performance lithium batteries
Facile, mild and fast thermal-decomposition reduction of graphene oxide in air and its application in high-performance lithium batteries Zhong-li Wang, Dan Xu, Yun Huang, Zhong Wu, Li-min Wang and Xin-bo
More informationRed Phosphorus Nano-Dots on Reduced Graphene Oxide as Flexible High-Performance Anode for Sodium-Ion Batteries
Red Phosphorus Nano-Dots on Reduced Graphene Oxide as Flexible High-Performance Anode for Sodium-Ion Batteries Yihang Liu 1, Anyi Zhang 2, Chenfei Shen 2, Qingzhou Liu 2, Xuan Cao 2, Yuqiang Ma 2, Liang
More informationSchottky Tunnel Contacts for Efficient Coupling of Photovoltaics and Catalysts
Schottky Tunnel Contacts for Efficient Coupling of Photovoltaics and Catalysts Christopher E. D. Chidsey Department of Chemistry Stanford University Collaborators: Paul C. McIntyre, Y.W. Chen, J.D. Prange,
More informationSafe, Inexpensive, Long Life, High Power and Efficiency Batteries For Grid Scale Energy Storage Applications
Safe, Inexpensive, Long Life, High Power and Efficiency Batteries For Grid Scale Energy Storage Applications Investigators Yi Cui, Associate Professor; Robert Huggins, Professor; Mauro Pasta, Postdoctoral
More informationPHYSICAL REVIEW LETTERS 107,
Real-time Measurement of Stress and Damage Evolution During Initial Lithiation of Crystalline Silicon M. J. Chon, 1 V.A. Sethuraman, 1 A. McCormick, 1 V. Srinivasan, 2 P. R. Guduru 1,* 1 School of Engineering,
More informationWerkstoffforschung in der Batterietechnik
Werkstoffforschung in der Batterietechnik Philipp Adelhelm Institute for Technical Chemistry and Environmental Chemistry Center for Energy and Environmental Chemistry (CEEC Jena) Friedrich Schiller University
More informationPC BASED ELECTROLYTES WITH LIDFOB AS AN ALTERNATIVE SALT FOR LITHIUM- ION BATTERIES
University of Rhode Island DigitalCommons@URI Open Access Dissertations 2014 PC BASED ELECTROLYTES WITH LIDFOB AS AN ALTERNATIVE SALT FOR LITHIUM- ION BATTERIES Brandon M. Knight University of Rhode Island,
More informationElectronic Supplementary Material (ESI) for Chemical Communications This journal is The Royal Society of Chemistry 2013
Sodium-ion battery based on ion exchange membranes as electrolyte and separator Chengying Cao, Weiwei Liu, Lei Tan, Xiaozhen Liao and Lei Li* School of Chemical and Chemistry Engineering, Shanghai Jiaotong
More informationElectronic supplementary information. Efficient energy storage capabilities promoted by hierarchically MnCo 2 O 4
Electronic Supplementary Material (ESI) for RSC Advances. This journal is The Royal Society of Chemistry 2014 Electronic supplementary information Efficient energy storage capabilities promoted by hierarchically
More informationReview Thermal Runaway Reactions mechanisms Issue date : January 2011
Project HELIOS - High Energy Lithium-Ion Storage Solutions (www.helios-eu.org) Project number: FP7 2333765 (A 3 year project, supported by the European Commission, to study and test the comparative performances
More informationMetallization deposition and etching. Material mainly taken from Campbell, UCCS
Metallization deposition and etching Material mainly taken from Campbell, UCCS Application Metallization is back-end processing Metals used are aluminum and copper Mainly involves deposition and etching,
More informationSTRUCTURE, PROPERTIES, AND PERFORMANCE OF INORGANIC-FILLED SEPARATORS
STRUCTURE, PROPERTIES, AND PERFORMANCE OF INORGANIC-FILLED SEPARATORS R. Waterhouse, J. Emanuel, J. Frenzel, D. Lee, S. Peddini, Y. Patil, G. Fraser-Bell, and R.W. Pekala The 29 th International Battery
More informationCapacity fade study of lithium-ion batteries cycled at high discharge rates
Journal of Power Sources 117 (2003) 160 169 Capacity fade study of lithium-ion batteries cycled at high discharge rates Gang Ning, Bala Haran, Branko N. Popov * Department of Chemical Engineering, University
More informationExperiences of PLD Technology for LIB Separators. PICODEON Oy. Neal White
Experiences of PLD Technology for LIB Separators PICODEON Oy Neal White 1 Outline Introduction to Picodeon Ceramic coating rationale Separator overview Why PLD for LIB separators Current status of Picodeon
More informationElectrochemical impedance study of initial lithium ion intercalation into graphite powders
Electrochimica Acta 46 (2001) 1793 1813 www.elsevier.nl/locate/electacta Electrochemical impedance study of initial lithium ion intercalation into graphite powders Chunsheng Wang a, *, A. John Appleby
More informationFundamental Chemistry of Sion Power Li/S Battery. Yuriy Mikhaylik Sion Power Corporation, 9040 South Rita Road, Tucson, Arizona, 85747, USA
Fundamental Chemistry of Sion Power Li/S Battery Yuriy Mikhaylik Sion Power Corporation, 9040 South Rita Road, Tucson, Arizona, 85747, USA Outline Thermodynamics of Li-S Discharge-charge mechanism in the
More informationNanoparticle Nanorod Core Shell LiNi 0.5 Mn 1.5 O 4 Spinel Cathodes with High Energy Density for Li-Ion Batteries
0013-4651/2010/157 7 /A841/5/$28.00 The Electrochemical Society Nanoparticle Nanorod Core Shell LiNi 0.5 Mn 1.5 O 4 Spinel Cathodes with High Energy Density for Li-Ion Batteries Minki Jo, a Young-Ki Lee,
More informationA tidy laboratory means a lazy chemist Jöns Jacob Berzelius (Swedish chemist, )
A tidy laboratory means a lazy chemist Jöns Jacob Berzelius (Swedish chemist,1779-1848) 6. SEC-Jahrestreffen, 18. - 20. Mai 2016 in Münster (GER) Vernachlässigt, vergessen oder unwichtig? - Inaktivmaterialien
More informationTaigo ONODERA ³, Jun KAWAJI, Akira SATO and Takefumi OKUMURA. 1. Introduction
Full paper Electrochemical performance of a newly-designed all-solid-state Li ion battery with a LiNi 1/3 Co 1/3 Mn 1/3 O 2 LiVO 3 mono-particle layered cathode and a lamellar LiVO 3 anode Taigo ONODERA
More informationLithium Potassium Manganese Mixed Metal Oxide Material for Rechargeable Electrochemical Cells
Lithium Potassium Manganese Mixed Metal Oxide Material for Rechargeable Electrochemical Cells Terrill B. Atwater 1,2 and Alvin J. Salkind 2,3 1 US Army RDECOM, CERDEC, Ft. Monmouth NJ 2 Rutgers University,
More informationExtended Life Tantalum Hybrid Capacitor
Extended Life Tantalum Hybrid Capacitor David Zawacki and David Evans Evans Capacitor Company 72 Boyd Avenue East Providence, RI 02914 (401) 435-3555 dzawacki@evanscap.com devans@evanscap.com Abstract
More informationSupplementary Material (ESI) for Chemical Communications. Solid-state single-crystal-to-single-crystal transformation from a 2D
Supplementary Material (ESI) for Chemical Communications Solid-state single-crystal-to-single-crystal transformation from a 2D layer to a 3D framework mediated by lattice iodine release Yuan-Chun He, a
More informationImpedance Monitoring of the Anodic Dissolution of PANi during the V 2 O 5 Deposition Step for the PANi/V 2 O 5 Composite Film Preparation
179 10.1149/1.3490697 The Electrochemical Society Impedance Monitoring of the Anodic Dissolution of PANi during the V 2 O 5 Deposition Step for the PANi/V 2 O 5 Composite Film Preparation K.-I. Park a,
More informationSustainability impact of nanomaterial enhanced lithium ion batteries
Rochester Institute of Technology RIT Scholar Works Theses Thesis/Dissertation Collections 6-6-2013 Sustainability impact of nanomaterial enhanced lithium ion batteries Matthew Ganter Follow this and additional
More informationProgress on Sn-based thin-film anode materials for lithium-ion batteries
Review SPECIAL ISSUE: New Energy Materials November 2012 Vol.57 No.32: 4119 4130 doi: 10.1007/s11434-012-5303-z Progress on Sn-based thin-film anode materials for lithium-ion batteries HU RenZong, LIU
More informationCHAPTER-VII SUMMARY AND CONCLUSIONS
CHAPTER-VII SUMMARY AND CONCLUSIONS Chapter-VII Summary and Conclusions Sr. No. Title Page No. 7.1 Summary 167 7.2 Conclusions.. 171 CHAPTER SEVEN Summary and Conclusions 7.1: Summary The technologies
More informationRichard LAUCOURNET Group head in the development of advanced materials for new energies CEA TOWARD A MORE EFFICIENT PROCESS TO RECOVER MATERIALS
Richard LAUCOURNET Group head in the development of advanced materials for new energies CEA TOWARD A MORE EFFICIENT PROCESS TO RECOVER MATERIALS STATE OF THE ART The directive on recycling for A high environmental
More informationNatural Graphite versus Synthetic, Silicon and Others in Lithium Ion Battery Anodes
Natural Graphite versus Synthetic, Silicon and Others in Lithium Ion Battery Anodes George C Hawley President George C Hawley & Associates Supermin123@hotmail.ca Biography George C. Hawley & Associates
More informationFormation and Growth of Surface Films on Graphitic Anode Materials for Li-Ion Batteries
A128 1099-0062/2005/8 2 /A128/5/$7.00 The Electrochemical Society, Inc. Formation and Growth of Surface Films on Graphitic Anode Materials for Li-Ion Batteries J. S. Gnanaraj, a, *,z R. W. Thompson, a
More informationSupporting Information
Supporting Information A Lithium-air fuel cell using copper to catalyze oxygen-reduction based on copper-corrosion mechanism Yonggang Wang Haoshen Zhou* Energy Technology Research Institute, National Institute
More informationReliability of Li-ion Batteries
IEEE Boston Reliability Seminar 9/11/13 Reliability of Li-ion Batteries Martin Z. Bazant Chemical Engineering & Mathematics MIT Matthew Pinson Peng Bai Dan Cogswell Todd Ferguson Alan Millner Prior funding
More informationControlled Nanoparticle Metal Phosphates (Metal = Al, Fe, Ce, and Sr) Coatings on LiCoO 2 Cathode Materials
A1142 0013-4651/2005/152 6 /A1142/7/$7.00 The Electrochemical Society, Inc. Controlled Nanoparticle Metal Phosphates (Metal = Al, Fe, Ce, and Sr) Coatings on LiCoO 2 Cathode Materials Jisuk Kim, a Mijung
More informationMagnetically aligned graphite electrodes for high-rate performance Li-ion batteries
ARTICLE NUMBER: 16097 Magnetically aligned graphite electrodes for high-rate performance Li-ion batteries Juliette Billaud 1+, Florian Bouville 2+, Tommaso Magrini 2, Claire Villevieille 1 *, André R.
More informationPARAMETER EFFECTS FOR THE GROWTH OF THIN POROUS ANODIC ALUMINUM OXIDES
10.1149/1.2794473, The Electrochemical Society PARAMETER EFFECTS FOR THE GROWTH OF THIN POROUS ANODIC ALUMINUM OXIDES S. Yim a, C. Bonhôte b, J. Lille b, and T. Wu b a Dept. of Chem. and Mat. Engr., San
More informationcomponents and inorganic Li salts from PST-90. When contacting with Li metal, PST-
Supplementary Figure 1. Proposed mechanism for the formation of organic components and inorganic Li salts from PST-90. When contacting with Li metal, PST- 1 90 first generates high order organopolysulfide
More informationInvestigation of Alkaline Ion Rocking Chair Batteries. Reza Fathi
University of Milano-Bicocca Department of Material Science Investigation of Alkaline Ion Rocking Chair Batteries Doctoral dissertation in Materials Science (XVII cycle) of Reza Fathi Supervisor : Prof.
More informationProcess steps for Field Emitter devices built on Silicon wafers And 3D Photovoltaics on Silicon wafers
Process steps for Field Emitter devices built on Silicon wafers And 3D Photovoltaics on Silicon wafers David W. Stollberg, Ph.D., P.E. Research Engineer and Adjunct Faculty GTRI_B-1 Field Emitters GTRI_B-2
More informationSynthesis and Evaluation of Electrocatalysts for Fuel Cells
Synthesis and Evaluation of Electrocatalysts for Fuel Cells Jingguang Chen Center for Catalytic Science and Technology (CCST) Department of Chemical Engineering University of Delaware Newark, DE 19711
More informationMichael R. Zachariah Professor
Michael R. Zachariah Professor Probing the Reaction Dynamics of Nanoenergetic Materials Department of Chemistry and Biochemistry NanoEnergetic Materials 2Al + 3MO Al O + 3M H 2 3 + Fuel Oxidizer METAL/
More informationThe Pennsylvania State University. The Graduate School. College of Engineering A MULTI-FACETED APPROACH TOWARDS IMPROVING THE PERFORMANCE OF
The Pennsylvania State University The Graduate School College of Engineering A MULTI-FACETED APPROACH TOWARDS IMPROVING THE PERFORMANCE OF SILICON ELECTRODES FOR NEXT-GENERATION LITHIUM-ION BATTERIES A
More informationHBLED packaging is becoming one of the new, high
Ag plating in HBLED packaging improves reflectivity and lowers costs JONATHAN HARRIS, President, CMC Laboratories, Inc., Tempe, AZ Various types of Ag plating technology along with the advantages and limitations
More informationSupplementary Figure S1 Crystal structure of the conducting filaments in sputtered SiO 2
Supplementary Figure S1 Crystal structure of the conducting filaments in sputtered SiO 2 based devices. (a) TEM image of the conducting filament in a SiO 2 based memory device used for SAED analysis. (b)
More informationOxides for High Performance Lithium-Ion Battery Anodes
Bacteria Absorption-Based Mn 2 P 2 O 7 -Carbon @ Reduced Graphene Oxides for High Performance Lithium-Ion Battery Anodes Yuhua Yang, 1 Bin Wang, 1,2 Jingyi Zhu, 3 Jun Zhou, 1 Zhi Xu, 1,4 Ling Fan, 1 Jian
More informationSupplementary information. performance Li-ion battery
Supplementary information The investigation of Ni(OH) 2 /Ni as anode for high performance Li-ion battery Shibing Ni a, Xiaohu Lv a, Tao Li a, Xuelin Yang a,and Lulu Zhang a College of Mechanical and Material
More informationCrack Prevention in NiCr-Alloys when Processed by AM (L-PB) William Jarosinski March 8, 2017
Crack Prevention in NiCr-Alloys when Processed by AM (L-PB) William Jarosinski March 8, 2017 Evolution into Metal Powders for AM Coating Service Since 1950s Metal Powders for AM A derivative of thermal
More informationCorrosion Rate Measurement on C-Steel
Measurements of corrosion rate on Carbon-steel using Electrochemical (potentiodynamic Polarization, EIS etc.) technique. Corrosion Rate Measurement on C-Steel Abdullah Al Ashraf 1. Introduction: The degradation
More informationHydrometallurgical processing of Li-Ion battery scrap from electric vehicles
Hydrometallurgical processing of Li-Ion battery scrap from electric vehicles Hydrometallurgical processing of Li-Ion battery scrap from electric vehicles H. Wang, M. Vest, B. Friedrich RWTH Aachen University
More informationSynthesis and electrochemical properties characterization of. batteries
Supplemental Proceedings: Volume 1: Fabrication, Materials, Processing and Properties TMS (The Minerals, Metals & Materials Society), 2009 Synthesis and electrochemical properties characterization of SnO
More informationNovel concept of rechargeable battery using iron oxide nanorods. anode and nickel hydroxide cathode in aqueous electrolyte
Supplementary Information for: Novel concept of rechargeable battery using iron oxide nanorods anode and nickel hydroxide cathode in aqueous electrolyte Zhaolin Liu *, Siok Wei Tay and Xu Li Institute
More informationHow to achieve uniform thickness of the anodic aluminum oxide film? Leonid M. Lerner AlZi Anodizing Solutions Co.
How to achieve uniform thickness of the anodic aluminum oxide film? Leonid M. Lerner AlZi Anodizing Solutions Co. 2014 AAC Conference September 16-18, Pittsburgh, PA, USA. 1 How to achieve uniform thickness
More informationWhat happens if we connect Zn and Pt in HCl solution? Corrosion of platinum (Pt) in HCl. 1. If Zn and Pt are not connected
Corrosion of platinum (Pt) in HCl Now if we place a piece of Pt in HCl, what will happen? Pt does not corrode does not take part in the electrochemical reaction Pt is a noble metal Pt acts as a reference
More informationSupplementary Figure 1. Photographs of the Suaeda glauca (S. glauca) Bunge at different stages of metal ion absorption. (a) Photographs of S.
1 2 3 4 5 6 7 Supplementary Figure 1. Photographs of the Suaeda glauca (S. glauca) Bunge at different stages of metal ion absorption. (a) Photographs of S. glauca after absorption of tin salt. (b) Photographs
More information2. Wet Corrosion: Characteristics, Prevention and Corrosion Rate
2. Wet Corrosion: Characteristics, Prevention and Corrosion Rate Mighty ships upon the ocean suffer from severe corrosion. Even those that stay at dockside are rapidly becoming oxide Alas, that piling
More informationHow Battery Materials Work: Visualizing Ion Migration Mette Ø. Filsø, Aarhus University, Denmark
How Battery Materials Work: Visualizing Ion Migration Mette Ø. Filsø, Aarhus University, Denmark BATTERY RESEARCH AT UNIVERSITY Synthesis and characterization of electrode materials Li 4 Ti 5 O 12, LiFePO
More informationLarge-scale fabrication, 3D tomography, and lithium-ion battery application of porous silicon
Supplementary Materials Large-scale fabrication, 3D tomography, and lithium-ion battery application of porous silicon Mingyuan Ge 1, Yunhao Lu 2, Peter Ercius 3, Jiepeng Rong 1, Xin Fang 1, Matthew Mecklenburg
More informationELECTRICAL PROPERTIES OF FILM AND LITHIUM ION BATTERY COMPOSED OF NATURAL GRAPHITE PARTICLES GROUND UNDER VARIOUS ATMOSPHERES
ELECTRICAL PROPERTIES OF FILM AND LITIUM ION BATTERY COMPOSED OF NATURAL GRAPITE PARTICLES GROUND UNDER VARIOUS ATMOSPERES Y. Kuga, A. Ueda, Y. Ohira, and K. Ando Muroran Institute of Technology, Department
More informationKeramische Technologien und Systeme für die effiziente Energiewandlung und -speicherung
Keramische Technologien und Systeme für die effiziente Energiewandlung und -speicherung Institut für Keramische Technologien und Systems: IKTS Alexander Michaelis Total Budget: Mio Main sites : Dresden
More informationLITHIUM ION BATTERIES
LITHIUM ION BATTERIES NICKEL & COBALT FOR LITHIUM ION BATTERIES Cobalt and nickel are critical raw materials in the production of cathodes for the lithium-ion battery (LiB) market. These metals are used
More informationEffect of Anodizing Potential on the Surface Morphology and Corrosion Property of AZ31 Magnesium Alloy
Materials Transactions, Vol. 51, No. 6 (21) pp. 119 to 1113 #21 The Japan Institute of Metals Effect of Anodizing Potential on the Surface Morphology and Corrosion Property of AZ31 Magnesium Alloy S. A.
More informationPohjalainen, Elina; Kallioinen, J.; Kallio, Tanja Comparative study of carbon free and carbon containing Li4Ti5O12 electrodes
Powered by TCPDF (www.tcpdf.org) This is an electronic reprint of the original article. This reprint may differ from the original in pagination and typographic detail. Pohjalainen, Elina; Kallioinen, J.;
More informationState of the art quality of a GeOx interfacial passivation layer formed on Ge(001)
APPLICATION NOTE State of the art quality of a Ox interfacial passivation layer formed on (001) Summary A number of research efforts have been made to realize Metal-Oxide-Semiconductor Field Effect Transistors
More informationMaterials Chemistry A
Journal of Materials Chemistry A PAPER View Article Online View Journal View Issue Cite this: J. Mater. Chem. A, 2015,3, 8489 Received 24th February 2015 Accepted 9th March 2015 DOI: 10.1039/c5ta01445j
More informationABSTRACT. Since carbon dioxide from petroleum-derived fuels has become an environmental
ABSTRACT KIM, SANGWOOK. Stresses at Electrode-Electrolyte Interface in Lithium-ion Batteries via Multiphysics Modeling (Under the direction of Dr. Hsiao-Ying Shadow Huang.) Since carbon dioxide from petroleum-derived
More informationMorphology controlled synthesis of monodispersed manganese. sulfide nanocrystals and their primary application for supercapacitor
Electronic Supplementary Material (ESI) for Chemical Communications. This journal is The Royal Society of Chemistry 2015 Morphology controlled synthesis of monodispersed manganese sulfide nanocrystals
More information» LiNi 0.5 x Co 2x Mn 0.5 x O 2 Æ º
«22 «5 Æ Ç Vol. 22, No. 5 2007 À 9 ³ Journal of Inorganic Materials Sep., 2007 Ç : 1000-324X(2007)05-0873-06» LiNi 0.5 x Co 2x Mn 0.5 x O 2 Æ º ÔÒ Ó Ð Ó Ñ ( Ï 410083) Æ Ã Ç ÊÉ É Ni 0.5 xco 2xMn 0.5 xco
More information