EHH-201. Wind-Driven Rain Louver Horizontal Blade. Application and Design. Standard Construction. Options (at additional cost)
|
|
- Stephanie Garrett
- 6 years ago
- Views:
Transcription
1 Application and Design is a Wind-Driven Rain louver designed to protect air intake and exhaust openings in building exterior walls that are sensitive to direct water penetration. Design incorporates a drainable head member and horizontal rain resistant blades to provide maximum resistance to wind driven rain in even the most extreme weather conditions. The is an AMCA CERTIFIED LOUVER enabling designers to select and apply with confidence. Standard Construction Frame Heavy gauge extruded 6063-T5 aluminum, 2 in. x in. nominal wall thickness Blades Horizontal rain resistant style, heavy gauge extruded 6063-T5 aluminum, in. nominal wall thickness, positioned on approximately 1 in. blade spacing Construction....Mechanically fastened Birdscreen /4 in. x in. flattened expanded aluminum in removable frame, inside mount (rear) Finish Mill Sill Pan formed aluminum Minimum Size...6 in. W x 6 in. H Maximum Single Section Size in. W x 84 in. H Horizontal Blade Options (at additional cost) A variety of bird and insect screens Blank-off panel Clip angles Filter rack Flanged frame (head and jamb only) Security bars A variety of architectural finishes including: Clear anodize Integral color anodize Baked enamel Kynar *Width and height dimensions furnished approximately ¼ inch under size.
2 PERFORMANCE DATA Wind-Driven Rain Performance Core Velocity 75mm/h (3 in/hr) Rainfall & 13 m/s (29 mph) Wind Velocity Free Area Velocity Effectiveness % Classification Core Velocity 200mm/h (8 in/hr) Rainfall & 22 m/s (50 mph) Wind Velocity Free Area Velocity Effectiveness % Classification 0.0 (0) 0.0 (0) 99.9 A 0.0 (0) 0.0 (0) 99.8 A 0.7 (131) 1.6 (307) 99.4 A 0.5 (103) 1.2 (241) 99.4 A 1.0 (189) 2.2 (442) 99.3 A 1.0 (189) 2.2 (442) 98.5 B 1.4 (280) 3.3 (655) 97.8 B 1.5 (291) 3.5 (681) 95.6 B 1.9 (381) 4.5 (892) 93.2 C 2.0 (401) 4.8 (938) 91.8 C 2.4 (463) 5.5 (1083) 87.7 C 2.5 (500) 5.9 (1170) 87.7 C 2.9 (578) 6.9 (1353) 77.4 D 2.9 (570) 6.8 (1334) 87.2 C 3.5 (685) 8.1 (1603) 69.0 D 3.5 (681) 8.1 (1594) 75.9 D Discharge Loss Coefficient Class (Intake) = 3 Weather louvers shall be classified by their ability to reject simulated rain. The table shows different classifications based on the maximum simulated rain penetration per square meter (square feet) of louver. penetration rating at a given louver face velocity is determined by the water penetration while the louver is subjected to a selected simulated rainfall rate and wind velocity. Discharge Loss Coefficient Classifications Class Discharge Loss Coefficient Wind-driven Rain Classes and Above Class Effectiveness to A 1 to to B to and Below C to 0.80 D Below 0.80 Greenheck Fan Corporation certifies that the louvers shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified Ratings Program. The AMCA Certified Ratings Seal applies to air performance, water penetration, and wind-driven rain ratings. Airflow Resistance (Standard Air lb/ft 3 ) Test size 48 in. x 48 in. Test Duration of 15 min. Model resistance to airflow (pressure drop) varies depending on louver application (air intake or air exhaust). Free area velocities (shown) are higher than average velocity through the overall louver size. See louver selection information. (Test Figure ) The AMCA Test provides a method for comparing various louver models and designs as to their efficiency in resisting the penetration of rainfall under specific laboratory test conditions. The beginning point of water penetration is defined as that velocity where the water penetration curve projects through.01 oz. of water (penetration) per sq. ft. of louver free area. * The beginning point of water penetration for Model is 973 fpm free area velocity. These perfor mance ratings do not guarantee a louver to be weatherproof or stormproof and should be used in combination with other factors including good engineering judgement in selecting louvers.
3 PERFORMANCE DATA Free Area Chart (sq. ft.) Louver Height Inches Louver Width in Inches Core Area Chart (sq. ft.) Louver Height Inches Louver Width in Inches
4 INSTALLATION DETAILS Maximum Size and Installation Information Maximum single section size for model is 96 in. W x 84 in. H. Larger openings require field assembly of multiple louver panels to make up the overall opening size. Individual louver panels are designed to withstand a 25 PSF wind-load (please consult Greenheck if the louvers must withstand higher wind-loads). Structural reinforcing members may be required to adequately support and install multiple louver panels within a large opening. Structural reinforcing members along with any associated installation hardware is not provided by Greenheck unless indicated otherwise by Greenheck. Additional information on louver installation may be found in AMCA Publication #501, Louver Application Manual. Minimum Single Section Size 6 in. W x 6 in. H Maximum Single Section Size 96 in. W x 84 in. H
5 PRODUCT DETAILS
6 OPTION DRAWINGS FINISHES Finish Type Description/Application Color Selection Standard Warranty (Aluminum) 2-coat 70% KYNAR 500 /HYLAR 5000 AAMA 2605 Dry film thickness 1.2 mil. (AKA: Duranar, Fluoropon, Trinar, Flouropolymer, Polyvinylidene Fluoride, PVDF2) Best. The premier finish for extruded aluminum. Tough, long-lasting coating has superior color retention and abrasive properties. Resists chalking, fading, chemical abrasion and weathering. Standard Colors: Any of the 24 standard colors shown can be furnished in 70% or 50% KYNAR 500 /HYLAR 5000 or Baked Enamel. 10 Years (Consult Greenheck for availability of extended warranty) 2-coat 50% KYNAR 500 /HYLAR 5000 AAMA 2604 Dry film thickness 1.2 mil. (AKA: Acroflur, Acrynar ) Baked Enamel AAMA 2603 Dry film thickness 0.8 mil. (AKA: Acrabond Plus, Duracron ) Better. Tough, long-lasting coating has excellent color retention and abrasive properties. Resists chalking, fading, chemical abrasion and weathering. Good. Provides good adhesion and resistance to weathering, corrosion and chemical stain. 2-Coat Mica: Greenheck offers 9 standard 2- coat Mica colors. Other colors are available. Consult Greenheck for possible extra cost when selecting non-standard colors or special finishes. 5 Years 1 Year Integral Color Anodize AA-M10C22A42 (>0.7 mil) Clear Anodize 215 R-1 AA-M10C22A41 (>0.7 mil) Clear Anodize 204 R-1 AA-M10C22A31 ( mil) Industrial coatings Mill Two-step anodizing is produced by following the normal anodizing step with a second, colorfast process. Clear, colorless and hard oxide aluminum coating that resists weathering and chemical attack. Clear, colorless and hard oxide aluminum coating that resists weathering and chemical attack. Light, Medium or Dark Bronze; Champagne; Black Clear Clear Greenheck offers a number of industrial coatings such as Hi-Pro Polyester, Epoxy, and Permatector. Consult a Greenheck Product Specialist for complete color and application information. Materials may be supplied in natural aluminum or galvanized steel finish when normal weathering is acceptable and there is no concern for color or color change. 5 years 5 years 1 Year Consult Greenheck Finishes meet or exceed AAMA 2605, AAMA 2604, and AAMA 2603 requirements. Please consult for complete information on standard and extended paint warranties. Paint finish warranties are not applicable to steel products. n/a January 2018 Copyright 2018 Greenheck Fan Corporation Greenheck Fan Corporation reserves the right to make product changes without notice.
EHH-401. Wind-Driven Rain Louver Horizontal Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design is a Wind-Driven Rain louver designed to protect air intake and exhaust openings in building exterior walls that are sensitive to direct water penetration. Design incorporates a
More informationEVH-501. Wind-Driven Rain Louver Vertical Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design is a Wind-Driven Rain louver designed to protect air intake and exhaust openings in building exterior walls that are sensitive to direct water penetration. Design incorporates a
More informationEHH-501. Wind-Driven Rain Louver Horizontal Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design is a Wind-Driven Rain louver designed to protect air intake and exhaust openings in building exterior walls that are sensitive to direct water penetration. Design incorporates a
More informationEVH-602. Wind-Driven Rain Louver Vertical Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design is a Wind-Driven Rain louver designed to protect air intake and exhaust openings in building exterior walls that are sensitive to direct water penetration. Design incorporates a
More informationEVH-501. Wind-Driven Rain Louver Vertical Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design is a Wind-Driven Rain louver designed to protect air intake and exhaust openings in building exterior walls that are sensitive to direct water penetration. Design incorporates a
More informationEVH6. Wind-Driven Rain Louver Vertical Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design is a Wind-Driven Rain louver designed to protect air intake and exhaust openings in building exterior walls that are sensitive to direct water penetration. Design incorporates vertical
More informationEHH-401. Wind-Driven Rain Louver Horizontal Blade. Application and Design. Standard Construction. Options (at additional cost)
Horizontal Blade Application and Design is a Wind-Driven Rain louver designed to protect air intake and exhaust openings in building exterior walls that are sensitive to direct water penetration. Design
More informationEHV-901. Wind-Driven Rain Louver Dual Module. Application and Design. Standard Construction. Options (at additional cost)
Dual Module Application and Design is a High Velocity Wind Driven Rain louver designed to protect intake and exhaust openings in building exterior walls. is tested in accordance with AMCA 500-L Air Performance,
More informationVAVH-5. Wind-Driven Rain Louver Vertical Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design is a Wind-Driven Rain louver designed to protect air intake and exhaust openings in building exterior walls that are sensitive to direct water penetration. Design incorporates a
More informationEDD-601. Stationary Louver Dual Drainable Blade. Application and Design. Standard Construction
Application and Design is a weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates a drainable head member and stationary horizontal blades to
More informationESD-435. Stationary Louver Drainable Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Stationary Louver Drainable Blade is a weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates drain gutters in the head
More informationEDJ-202. Stationary Louver J Blade. Application and Design
Application and Design Stationary Louver J Blade is a weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates, drainable head, J style blades,
More informationESD-635. Stationary Louver Drainable Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Stationary Louver Drainable Blade is a weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates drain gutters in the head
More informationEDK-402. Stationary Louver K Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Stationary Louver K Blade is a weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates drainable head, K style blades,
More informationEDJ-401. Stationary Louver J Blade. Application and Design
Application and Design Stationary Louver J Blade is a weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates drainable head, J style blades,
More informationSED-501. Sightproof Louver Drainable Blade. Application and Design
Application and Design is a sightproof weather louver designed to protect air intake and exhaust openings in building exterior walls when visual see through prevention is needed. Design incorporates a
More informationESJ-202. Stationary Louver J Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Stationary Louver J Blade is a weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates J style blades, sloped sill and
More informationESD-403. Stationary Louver Drainable Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Stationary Louver Drainable Blade is a weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates a drainable head member
More informationEDD-401. Stationary Louver Dual Drainable Blade. Application and Design. Standard Construction
Application and Design is a weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates a drainable head member and stationary horizontal blades to
More informationESJ-401. Stationary Louver J Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Stationary Louver J Blade is a weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates J style blades, sloped sill and
More informationESJ-401RM. Stationary Louver J Blade. Application and Design. Standard Construction. Options (at additional cost)
Stationary Louver J Blade Application and Design is a weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates J style blades, sloped sill and
More informationEHM-601. Hidden Mullion Louver Dual Drainable Blade. Application and Design
Hidden Mullion Louver Dual Drainable Blade Application and Design is a weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates drain gutters in
More informationESD-202. Stationary Louver Drainable Blade. Application and Design
Stationary Louver Drainable Blade Application and Design is a weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates a drainable head member
More informationEAD-635. Adjustable Louver Drainable Blades. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Adjustable Louver Drainable Blades is an adjustable louver designed to protect air intake and exhaust openings in building exterior walls that require tight air shut off. Design
More informationAFJ-601. Acoustical Louver J Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Acoustical Louver J Blade is an acoustical weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates J style insulated acoustical
More informationEVH-660D. Miami-Dade Qualified Wind-Driven Rain Louver. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Miami-Dade Qualified Wind-Driven Rain Louver is a Florida Product Approved and Miami-Dade Qualified stationary vertical blade wind driven rain extruded aluminum louver designed to
More informationAFA-801. Acoustical Louver Airfoil Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Acoustical Louver Airfoil Blade is an acoustical weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates airfoil style
More informationEAH-690. Adjustable Louver J Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design is an adjustable louver designed to protect air intake and exhaust openings in building exterior walls that require tight air shut off. Design incorporates a drainable head member
More informationECD-601. Combination Louver/Damper Drainable Blade. Application and Design. Standard Construction
Application and Design is a combination louver/damper designed to protect air intake and exhaust openings in building exterior walls that, at times, require tight air shut off. Design incorporates a drainable
More informationVASJ-6. Stationary Louver J Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Stationary Louver is a weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates J style blades, sloped sill and high free
More informationEAD-401. Adjustable Louver Drainable Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design is an adjustable louver designed to protect air intake and exhaust openings in building exterior walls that require tight air shut off. Design incorporates a drainable head member
More informationFSJ-602. Fabricated Steel Stationary Louver J Blade. Application and Design
Stationary Louver J Blade Application and Design is fabricated stationary louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates stationary J style blades.
More informationFSJ-402. Fabricated Steel Stationary Louver J Blade. Application and Design
Stationary Louver J Blade Application and Design is fabricated stationary louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates stationary J style blades.
More informationEAD-601. Adjustable Louver Drainable Blades. Application and Design. Standard Construction. Options (at additional cost)
Application and Design is an adjustable louver designed to protect air intake and exhaust openings in building exterior walls that require tight air shut off. Design incorporates a drainable head member
More informationFDS-602. Fabricated Steel Stationary Louver Drainable Blade. Application and Design. Standard Construction. Options (at additional cost)
Stationary Louver Drainable Blade Application and Design is fabricated stationary louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates a drainable
More informationEACA-601. Combination Louver/Damper Airfoil Blade. Application and Design. Standard Construction
Application and Design is a combination louver/damper designed to protect air intake and exhaust openings in building exterior walls that, at times, require tight air shut off. Design incorporates a drainable
More informationEAC-601. Combination Louver/Damper Drainable Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design is a combination louver/damper designed to protect air intake and exhaust openings in building exterior walls that, at times, require tight air shut off. Design incorporates a drainable
More informationFSJ-402. Fabricated Steel Stationary Louver J Blade. Application and Design
Application and Design is fabricated stationary louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates stationary J style blades. The FSJ- 402 is an
More informationEAC-401. Combination Louver/Damper Drainable Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design is a combination louver/damper designed to protect air intake and exhaust openings in building exterior walls that, at times, require tight air shut off. Design incorporates a drainable
More informationESID-430. Intake/Discharge Specialty Louver Stationary Blades. Application and Design
Stationary Blades Application and Design is a specialty louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates a drainable head member with exhaust blades
More informationVAAD-6. Adjustable Louver Drainable Blades. Application and Design
Application and Design is an adjustable louver designed to protect air intake and exhaust openings in building exterior walls that require tight air shut off. Design incorporates a drainable head member
More informationAFJ-601D. Miami-Dade Qualified Acoustical Louver. Application and Design. Standard Construction. Options (at additional cost)
Miami-Dade Qualified Acoustical Louver Application and Design is a Florida Product Approved and Miami-Dade Qualified stationary acoustical aluminum louver designed to protect air intake and exhaust openings
More informationEACC-601. Combination Louver/Damper Concealed Actuator. Application and Design. Standard Construction
Application and Design Concealed Actuator is a combination louver/damper designed to protect air intake and exhaust openings in building exterior walls that, at times, require tight air shut off. Design
More informationEVH-660D. Miami-Dade Qualified Wind-Driven Rain Louver. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Miami-Dade Qualified Wind-Driven Rain Louver EVH-0D Florida Product Approval No.: 1785.1 EVH-0D is a Florida Product Approved and Miami-Dade Qualified stationary vertical blade wind
More informationESU-153. Thinline Louver Thinline Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Thinline Blade is a thinline stationary louver commonly used for interior or exterior applications where high free area and low airflow resistance is required. The narrow depth makes
More informationESU-154. Thinline Louver Thinline Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Thinline Blade is a thinline stationary louver commonly used for interior or exterior applications where high free area and low airflow resistance is required. The narrow depth makes
More informationESU-154. Thinline Louver Thinline Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Thinline Blade is a thinline stationary louver commonly used for interior or exterior applications where high free area and low airflow resistance is required. The narrow depth makes
More informationFAD-402. Fabricated Steel Adjustable Louver Drainable Blade. Application and Design. Standard Construction. Options (at additional cost)
Adjustable Louver Drainable Blade Application and Design is fabricated adjustable louver designed to protect air intake and exhaust openings in building exterior walls that requires tight air shut off.
More informationESD-435X. Florida Product Approved Drainable Blade Louver. Application and Design. Standard Construction. Qualified Shapes
Application and Design is a Florida Product Approved stationary drainable blade extruded aluminum louver designed to protect air intake and exhaust openings in building exterior walls. is tested in accordance
More informationESF-145. Thin-line Louver Flat Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Flat Blade is a thin-line stationary louver commonly used for interior or exterior applications where high free area and low airflow resistance is required. The narrow depth makes
More informationESD-435X. Florida Product Approved Drainable Blade Louver. Application and Design. Standard Construction. Qualified Shapes
Application and Design Florida Product Approved Drainable Blade Louver is a Florida Product Approved stationary drainable blade extruded aluminum louver designed to protect air intake and exhaust openings
More informationESU-130. Thin-line Louver Thin-line Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Thin-line Blade is a thin-line stationary louver commonly used for interior or exterior applications where high free area and low airflow resistance is required. The narrow depth
More informationVACC-4. Combination Louver/Damper Drainable Blade. Application and Design
Application and Design is a combination louver/damper designed to protect air intake and exhaust openings in building exterior walls that, at times, require tight air shut off. Design incorporates a drainable
More informationESU-150. Thin-line Louver Thin-line Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Thin-line Blade is a thin-line stationary louver commonly used for interior or exterior applications where high free area and low airflow resistance is required. The narrow depth
More informationESU-154S. Thinline Louver Frameless. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Frameless is a frameless ultra thinline stationary louver commonly used for interior or exterior applications where high free area and low airflow resistance is required. The narrow
More informationESU-130S. Thin-line Louver Frameless. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Frameless is a frameless ultra thin-line stationary louver commonly used for interior or exterior applications where high free area and low airflow resistance is required. The narrow
More informationESD-603D. Miami-Dade Qualified Drainable Blade Louver. Application and Design. Standard Construction. Options (at additional cost)
Miami-Dade Qualified Drainable Blade Louver Florida Product Approval No: FL4826.1 Application and Design is an extruded aluminum drainable blade louver designed to protect air intake and exhaust openings
More informationEACA-601D. Miami-Dade Qualified Combination Louver
Miami-Dade Qualified Combination Louver Application and Design is a Florida Product Approved and Miami-Dade Qualified combination louver/damper designed to protect air intake and exhaust openings in building
More informationMiami-Dade Qualified Drainable Blade Louvered Penthouse
Application and Design is a gravity intake or exhaust louvered penthouse. Model incorporates high performance horizontal drainable style blades. Meets the performance requirements established by the Florida
More informationEHH-601D. Miami-Dade Qualified Wind-Driven Rain Louver
Application and Design is a Florida Product Approved and Miami-Dade Qualified stationary horizontal blade wind driven rain extruded aluminum louver designed to protect air intake and exhaust openings in
More informationSCV501MD Florida Product Approval No.: Miami-Dade, FL NOA No.: , EXP. 8/6/2020 Maximum Wind-Load: 130 PSF
FLORIDA BUILDING CODE & MIAMI-DADE APPROVED STORM CLASS TM LOUVER Visible Mullion Louver Type... SCV501MD LOUVER TYPE SCV501MD Florida Product Approval No.: 19278.1 Miami-Dade, FL NOA No.: 15-0415.6, EXP.
More informationFlorida Product Approval No.: FL Miami-Dade, FL NOA No.: , EXP. 12/7/16. Visible Mullion Louver Type... SCV602MD
FLORIDA BUILDING CODE & MIAMI-DADE APPROVED STORM CLASS TM LOUVER Visible Mullion Louver Type... SCV602MD LOUVER TYPE SCV602MD Florida Product Approval No.: FL8926.2 Miami-Dade, FL NOA No.: 11-1103.02,
More informationSCV602MD Florida Product Approval No.: FL Miami-Dade, FL NOA No.: , EXP. 12/7/16 TDI Approval No.: LVR-05
FLORIDA BUILDING CODE & MIAMI-DADE APPROVED STORM CLASS TM LOUVER Visible Mullion Louver Type... SCV602MD LOUVER TYPE SCV602MD Florida Product Approval No.: FL8926.2 Miami-Dade, FL NOA No.: 16-0201.10,
More informationK6746X Florida Product Approval No.: FL7708.2, UL Classified: R25376
LOUVER TYPE K6746X Florida Product Approval No.: FL7708.2, 15720.2 UL Classified: R25376 FLORIDA BUILDING CODE APPROVED DRAINABLE LOUVER Visible Mullion Louver Type... K6746X Material.... Extruded Aluminum
More informationWIND-DRIVEN RAIN LOUVER MODEL LE-36
APPLICATION AND DESIGN The LE-36 is a High Velocity Wind Driven Rain louver designed to protect building ventilation openings from extreme weather. The LE-36 has a dual blade system. The front blade is
More informationStationary Louvers. Product Type Model Description EDD-401, 601 ESD-202, 403, 435, 603, 635 EDJ-202, 401, 430, 601 EDK-402, 430, 602 ESID-430
Recessed Mullion Stationary All Other Stationary 3 Days Stationary Stationary extruded aluminum louvers are used in applications that require intake and exhaust ventilation with moderate protection from
More informationK6746PD Florida Product Approval No.: Miami-Dade NOA No.: , EXP. 6/19/23
PENTHOUSE TYPE K6746PD Florida Product Approval No.: 11357.1 Miami-Dade NOA No.: 18-0314.04, EXP. 6/19/23 MIAMI-DADE APPROVED DRAINABLE LOUVER PENTHOUSE Visible Mullion Louver Type... K6746PD Material....
More information10200/ARR Buyline 4822 ARROW LOUVERS. The Preferred Line PUBLICATION
10200/ARR ARROW LOUVERS The Preferred Line PUBLICATION 697 03 ARROW LOUVERS Arrow Louvers are custom-built, quality assemblies manufactured to meet your design specifications. Our louvers are constructed
More information6 Drainable Louver. Update to Louvers Catalog C-1.0. Catalogue Page 2 Page 7. Page LP-13. Submittals Drawing
6 Drainable Louver Section Page Number Catalogue Page 2 Page 7 Performance Data Page LP-12 Page LP-13 Submittals Drawing 237947 Update to Louvers Catalog C-1.0 April 2010 Louvers General Product Overview
More informationELM6375DX DRAINABLE ADJUSTABLE LOUVER EXTRUDED ALUMINUM
RUSKIN 3900 Dr. Greaves Rd. Grandview, MO 64030 (816) 761-7476 FAX (816) 966-1655 ELM6375DX DRAINABLE ADJUSTABLE LOUVER EXTRUDED ALUMINUM STANDARD CONSTRUCTION FRAME 6 (152) deep, 6063T5 extruded aluminum
More informationRuskin model ELF375X with 5/8" 0.40 aluminum bird screen and Baked Enamel Finish to Match
V. LOUVERS Ruskin model ELF375X with 5/8" 0.40 aluminum bird screen and Baked Enamel Finish to Match Notes: 1) Verify louver sizes prior to releasing. 2) Color to be selected from Ruskin standard color
More informationLOUVER PRODUCTS. Architectural Blade Louvers Drainable Blade Louvers Wind-Driven Rain Louvers Sightproof Louvers Acoustical Louvers Thinline Louvers
LOUVER PRODUCTS Archives of Ontario Building, York University, Toronto, Ontario Architectural Blade Louvers Drainable Blade Louvers Wind-Driven Rain Louvers Sightproof Louvers Acoustical Louvers Thinline
More informationLouvers Selection, Design Considerations and Details Written by Matt Trentham, R.L. Craig Company, Inc.
Louvers Selection, Design Considerations and Details Written by Matt Trentham, R.L. Craig Company, Inc. Louvers are a basic and simple part of many HVAC systems and buildings, but they are often overlooked
More informationEME6325D WIND-DRIVEN RAIN RESISTANT STATIONARY LOUVER
3900 Dr. Greaves Rd. Kansas City, MO 64030 (816) 761-7476 FAX (816) 765-8955 EME6325D WIND-DRIVEN RAIN RESISTANT STATIONARY LOUVER MIAMI-DADE APPROVED MIAMI-DADE COUNTY, FLORIDA NOTICE OF ACCEPTANCE NUMBER:
More informationLC-1250, LM-1250, LV-1250, LV-1251, and LV-1800 Louvers
LC-50, LM-50, LV-50, LV-51, and LV-1800 Louvers Product Bulletin Code No. LIT-011469 Issued July 2016 Refer to the QuickLIT website for the most up-to-date version of this document. Since 1885, Johnson
More informationEME6325D WIND-DRIVEN RAIN RESISTANT STATIONARY LOUVER
PATENT PENDING 3900 Dr. Greaves Rd. Kansas City, MO 64030 (816) 761-7476 FAX (816) 765-8955 EME6325D WIND-DRIVEN RAIN RESISTANT STATIONARY LOUVER MIAMI-DADE APPROVED MIAMI-DADE COUNTY, FLORIDA NOTICE OF
More informationLOUVERS GENERAL PRODUCT OVERVIEW
GENERL PRODUCT OVERVIEW t Nailor Industries, we ve been manufacturing premium quality air control products for over 40 years. We ve learned a lot since producing our first device and have incorporated
More informationSafidLouvers. Sand Trap Louver STL STL STL Construction Standard STL STL STL Optional Extras
STL - 100 STL - 100 Sand Trap Louver is normally used as prefilter for fresh air intake of Air Handling Units (AHU), Package Air Conditioning Units (PACU), Roof Top Fresh Air Units (RTFAU) for Air Conditioning
More informationEME520MD WIND-DRIVEN RAIN RESISTANT STATIONARY LOUVER
3900 Dr. Greaves Rd. Kansas City, MO 64030 (816) 761-7476 FX (816) 765-8955 EME520MD WIND-DRIVEN RIN RESISTNT STTIONRY LOUVER MIMI-DDE PPROVED MIMI-DDE COUNTY, FLORID NOTICE OF CCEPTNCE NUMBER: 12-0816.01
More informationEME520MD WIND-DRIVEN RAIN RESISTANT STATIONARY LOUVER
3900 Dr. Greaves Rd. Kansas City, MO 64030 (816) 761-7476 FX (816) 765-8955 EME520MD WIND-DRIVEN RIN RESISTNT STTIONRY LOUVER MIMI-DDE PPROVED MIMI-DDE COUNTY, FLORID NOTICE OF CCEPTNCE NUMBER: 17-1214.18
More informationELF6375DXD DRAINABLE STATIONARY LOUVER
3900 Dr. Greaves Rd. Kansas City, MO 64030 (816) 761-7476 FAX (816) 765-8955 ELF6375DXD DRAINABLE STATIONARY LOUVER MIAMI-DADE APPROVED MIAMI-DADE COUNTY, FLORIDA NOTICE OF ACCEPTANCE NUMBER: 12-060 (Expires
More informationELF6375DXD DRAINABLE STATIONARY LOUVER
3900 Dr. Greaves Rd. Kansas City, MO 64030 (816) 761-7476 FAX (816) 765-8955 ELF6375DXD DRAINABLE STATIONARY LOUVER MIAMI-DADE APPROVED MIAMI-DADE COUNTY, FLORIDA NOTICE OF ACCEPTANCE NUMBER:17-1025.02
More informationLOUVERS ACOUSTICAL BRICK VENT COMBINATION DRAINABLE EQUIPMENT SCREENS FORMED METAL NON-DRAINABLE OPERABLE PENTHOUSE SAND LOUVER WIND-DRIVEN RAIN
LOUVERS ACOUSTICAL BRIC VENT COMBINATION EQUIPMENT SCREENS FORMED METAL NON- OPERABLE PENTHOUSE SAND LOUVER WIND-DRIVEN RAIN C&S AIR PRODUCTS IS: Innovation, quality, performance and service are what differentiate
More information5DDWRDC WIND-DRIVEN RAIN RESISTANT STATIONARY LOUVER
1300 ENTERPRISE ROD GENEV, LBM 36340-0580 800-239-4621 FX 1-800-508-1469 www.reliablelouvers.com 5DDWRDC WIND-DRIVEN RIN RESISTNT STTIONRY LOUVER MIMI-DDE PPROVED MIMI-DDE COUNTY, FLORID NOTICE OF CCEPTNCE
More informationSPECIFICATION SECTION PART 1 GENERAL
PART 1 GENERAL 1.01 Summary A. Furnish and install louvers, bird screens, blank-off panels, structural supports and attachment brackets as shown on the drawings, as specified, and as needed for a complete
More informationSPECIFICATION SECTION PART 1 GENERAL
PART 1 GENERAL 1.01 Summary A. Furnish and install louvers, bird screens, blank-off panels, structural supports and attachment brackets as shown on the drawings, as specified, and as needed for a complete
More informationWall Louvers (10200)
Wall Louvers 08 90 00 (10200) PART 1 GENERAL SECTION INCLUDES A. Fixed, extruded-aluminum horizontal storm resistant louver RELATED SECTIONS A. Section 05120 - Structural Steel: Supports for penthouses.
More informationLOUVERS TABLE OF CONTENTS. Page No.
1 TBLE OF CONTENTS Page No. General Product Overview Louver pplications & Sizing Guide Quick Select Model Guide Extruded luminum Louvers: Nailor 1600 Series Thinline Frame Louvers 1602J - 2" (51) Deep
More informationA. This Section includes ceiling- and wall-mounted diffusers, registers, grilles and louvers.
SECTION 23 37 13 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationPART 1 GENERAL 1.04 Quality Assurance
PART 1 GENERAL 1.01 Summary A. Furnish and install louvers, bird screens, blank-off panels, structural supports and attachment brackets as shown on the drawings, as specified, and as needed for a complete
More informationAcoustic Louvers ABSORPTIVE ACOUSTIC LOUVERS
ABSORPTIVE ACOUSTIC LOUVERS Developed to provide a solution to applications that require efficient ventilation without the transfer of undesirable noise, Price use acoustic media to absorb sound energy
More informationSPECIFICATION SECTION PART 1 GENERAL
PART 1 GENERAL 1.01 Summary A. Furnish and install louvers, bird screens, blank-off panels, structural supports and attachment brackets as shown on the drawings, as specified, and as needed for a complete
More informationSPECIFICATION SECTION PART 1 GENERAL
PART 1 GENERAL 1.01 Summary A. Furnish and install louvers, bird screens, blank-off panels, structural supports and attachment brackets as shown on the drawings, as specified, and as needed for a complete
More informationSPECIFICATION SECTION PART 1 GENERAL
PART 1 GENERAL 1.01 Summary A. Furnish and install louvers, bird screens, blank-off panels, structural supports and attachment brackets as shown on the drawings, as specified, and as needed for a complete
More informationSPECIFICATION SECTION PART 1 GENERAL
PART 1 GENERAL 1.01 Summary A. Furnish and install louvers, bird screens, blank-off panels, structural supports and attachment brackets as shown on the drawings, as specified, and as needed for a complete
More informationSelection. Technical Information. Finishes. pottorff.com
Selection Louvers Miami-Dade Wind-Driven Rain Non- Combination Operable Acoustical Formed Metal Penthouses Sight Screens Technical Information Finishes pottorff.com Selection Guide Miami-Dade ECD--MD EFD--MD
More informationSPECIFICATION SECTION PART 1 GENERAL
PART 1 GENERAL 1.01 Summary A. Furnish and install louvers, bird screens, blank-off panels, structural supports and attachment brackets as shown on the drawings, as specified, and as needed for a complete
More informationSevere Duty Louvered Products Miami-Dade County Qualified, Florida Product Approved, Wind-Driven Rain, FEMA 361 and Sand Louver
Severe Duty Louvered Products Miami-Dade County Qualified, Florida Product Approved, Wind-Driven Rain, FEMA 361 and Sand Louver April 2015 Model Reference Model Name Max. Wind-load AMCA Certifications
More informationRAMAPO COLLEGE OF NEW JERSEY PHASE II HOUSING REHABILITATION C 2012
SECTION 10200 - LOUVERS AND VENTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationDivision 8 Section "Flush Wood Doors" for louvers in wood doors. Division 15 Sections for louvers that are a part of mechanical equipment.
0 0 0 0 0 SECTION 000 - LOUVERS AND VENTS PART GENERAL RELATED DOCUMENTS EASTLAKE FIRE STATION REPLACEMENT HILLSBOROUGH COUNTY CIP # Drawings and general provisions of the Contract, including General and
More information