Elements WPC. Red. White. Walnut. Cedar. Teak. Rose. wood. O-Series

Transcription

1

2 Walnut Red wood Grey White sand Cedar Elements Teak Rose wood WPC Wood-Plastic Composite is a composite lumber or timber made of plastic and recycled wood. Wood-Plastic Composite is environmentally friendly due to its high recycled timber fibre content of 40-60%. It requires less maintenance than WPC the alternatives of solid wood treated with preservatives or solid wood of rot-resistant species. Resistant to rotting, decaying, warping, cracking and splitting, splintering and termites, this material is most suitable for outdoor use. R Rattan (from the Malay rotan), is the name for approximately six hundred species of palms. Rattans are distinct from other palms in having slender stems 2-5 cm diameter with long internodes between the leaves. Generally, raw rattan is processed into several products to be used as materials in furniture making. It is an excellent material mainly because it is lightweight, durable, and flexible to a certain extent. R

3 Al Aluminium is a silvery and ductile member of the poor metal group of chemical elements Aluminium is found primarily in bauxite ore and is remarkable for its ability to resist corrosion (due to the phenomenon of passivation) and its light AI weight. Powder coating is applied to offer a variety of colours and finishes. AC Acrylic is typically an unsaturated carbonyl compound which contains a carbon-carbon double bond and a carbon-oxygen double bond, separated by a carbon-carbon single bond. Acrylic has high impact strength and does not shatter AC but instead breaks into large dull pieces. ST Steel is an alloy consisting mostly of iron, with carbon content. Carbon is the most cost-effective alloying material for iron, but various other alloying elements ST are used such as manganese and tungsten. Carbon and other elements act as a hardening agent, preventing dislocations in the iron atom crystal lattice from sliding past one another. Varying the amount of alloying elements and their distribution in the steel controls qualities such as the hardness, elasticity, ductility, and tensile strength of the resulting steel. Powder coating is applied to offer a variety of colours and finishes and also to prevent rusting and corrosion. SS Stainless Steel is defined as an iron-carbon alloy with chromium content. The name originates from the fact that stainless steel does not stain, corrode or rust SS as easily as ordinary steel. Stainless steels have higher resistance to oxidation (rust) and corrosion in many natural and man made environments

4 BLOX Single Seater 900 x 600 x 750mm serial no: BX-3 Double Seater 1500 x 600 x 750mm Three Seater 2100 x 600 x 750mm

5 BLOX Single Seater 450 x 450 x 450mm serial no: BX-6 Double Seater 1200 x 450 x 450mm Three Seater 1800 x 450 x 450mm

6 BLOX Single Seater 600 x 405 x 400mm serial no: BX-9 Double Seater 1200 x 405 x 400mm Three Seater 1800 x 405 x 400mm

7 O-SCHOOL 1200 x 600 x 700mm serial no: OS x 600 x 700mm serial no: OS-6 These designs can be customed into other lengths.

8 O-SCHOOL serial no: OS x 700 x 750mm These designs can be customed into other lengths.

9 SUN-LOUNGE serial no: SL x 720 x 700mm

10 10 SUN-LOUNGE serial no: SL-6 serial no: SL x 750 x 125mm 1800 x 900 x 475mm

11 11 We custom make designs according to your project theme. If you have an idea, we will try our best to build it. If you can think of it, we will build it.

12 Mailing Address: Republic of Singapore Block 446, Hougang Avenue 8, #B1-1635, Singapore Contacts Ee Boon Kiat (65) , Francis Kho (65) Website Enquiries telephone (65) , facsimile (65) KIANSON is a trademark of Kianson Pte. Ltd. O Series (refers to Outdoor Series), Blox, O School, Sun Lounge are registered trademarks of Kianson Pte. Ltd. All rights reserved by Kianson Pte. Ltd. of the usage; circulation; publication; distribution of full or part of this brochure Kianson Pte. Ltd. Printed in the Republic of Singapore