NZQA registered unit standard version 2 Page 1 of 5. Use a mini-crawler crane with outriggers to lift and place regular loads
|
|
- Miles Owens
- 6 years ago
- Views:
Transcription
1 Page 1 of 5 Title Use a mini-crawler crane with outriggers to lift and place regular loads Level 3 Credits 15 Purpose People credited with this unit standard are able to: prepare to lift and place regular loads with a mini-crawler crane; sling a regular load with a mini-crawler crane; lift and place regular loads with a mini-crawler crane; and travel a mini-crawler crane. Classification Cranes > Crane Operation Available grade Achieved Entry information Critical health and safety prerequisites Unit 3789, Sling regular loads and communicate during crane operations, or demonstrate equivalent knowledge and skills. Explanatory notes 1 Definitions The definition of a crane is as given in the Health and Safety in Employment (Pressure Equipment, Cranes, and Passenger Ropeways) Regulations Regular loads have one or more of the following characteristics: uniform weight distribution, concentric loading, regular proportions, known lifting points, repetitively lifted. 2 Assessment For the purposes of assessment, the mini-crawler crane must be within the 0.5 to 6 tonnes capacity range, and be set up to lift on outriggers. Assessment must be carried out in a crane workplace or equivalent. 3 All tasks are to be carried out in accordance with the equipment manufacturers requirements and company procedures based on industry requirements in: a company quality management systems; b health and safety requirements and guidelines consistent with the Health and Safety in Employment Act 1992 (HSE Act); c equipment manufacturers operating instructions; d government and local government legislation, regulations, and bylaws; e Crane Safety Manual, published by the Crane Association of New Zealand (Inc), PO Box , Panama Street, Wellington 6146; f Approved Code of Practice for Load-Lifting Rigging, published by the Department of Labour, available at
2 Page 2 of 5 g Approved Code of Practice for Cranes, published by the Department of Labour, available at 4 HSE Act Codes of Practice are available from the Department of Labour website, Outcomes and evidence requirements Outcome 1 Prepare to lift and place regular loads with a mini-crawler crane. 1.1 Worksite is inspected for existing and potential hazards in accordance with company procedures. includes but is not limited to vehicles, equipment, ground condition, underground services, overhead power lines, overhead service lines, trees, buildings, structures, unauthorised people, confined work area, lack of secure anchor points. 1.2 Load is assessed to determine whether it is within the lifting capacity of the crane. 1.3 Hazards and potential hazards that may occur during crane operation are identified and dealt with in accordance with company procedures. may include but is not limited to access, obstructions, field of vision, working surface, communications, travel route, unsecure anchor points and lines, unauthorised people, unsecured loads, unstable loads, unknown loads, type of loads, adverse weather conditions. 1.4 The mini-crawler crane is located on a firm surface, levelled, and set up in accordance with manufacturer s recommendations, company procedures and the Crane Safety Manual. includes but is not limited to - crane placed in optimum position for lift, outriggers extended, turn over prevention device activated, work area cordoned off. 1.5 Pre-start check of the mini-crawler crane is carried out in accordance with manufacturer s recommendations.
3 Page 3 of 5 Outcome 2 Sling a regular load with a mini-crawler crane. 2.1 The functions of critical components of a mini crawler crane and lifting equipment are described in accordance with equipment manufacturers recommendations and company procedures. includes but is not limited to brakes, ropes, sheaves, load sensors, anti two-block, reset switch, alarm devices, hook block, boom, outriggers, hydraulic arms, remote control panel, electric power cables, control levers, slings, spreaders, hooks, shackles, purpose built lifting equipment. 2.2 Lifting and ancillary equipment are selected in accordance with company procedures, the Crane Safety Manual and the Approved Code of Practice for Load-Lifting Rigging. lifting equipment includes but is not limited to chain slings, wire rope slings, flat and round web slings, shackles, hooks, purposebuilt lifting equipment. 2.3 Lifting and ancillary equipment are assessed for defects, and action is taken where defects are identified, in accordance with the manufacturer s recommendations, the Crane Safety Manual and the Approved Code of Practice for Load-Lifting Rigging. lifting equipment includes but is not limited to chain slings, wire rope slings, flat and round web slings, shackles, hooks, purposebuilt lifting equipment. 2.4 Load is slung in accordance with Crane Safety Manual and the Approved Code of Practice for Load-Lifting Rigging. 2.5 Load is checked to ensure it is free of attachments and restraints in accordance with company procedures. Outcome 3 Lift and place regular loads with a mini-crawler crane. 3.1 Crane takes the weight, and load, equipment and crane are assessed to ensure they are stable for the entire load lifting and placing operation. 3.2 Load is lifted and placed evenly in accordance with crane manufacturer s operators manual, the Crane Safety Manual and the Approved Code of Practice for Load-Lifting Rigging.
4 Page 4 of 5 Outcome 4 Travel a mini-crawler crane. 4.1 Mini-crawler crane is positioned, stowed, and secured in accordance with crane manufacturer s operators manual and/or company procedures. includes but is not limited to boom retracted and stowed, hook block set in travel mode position, outriggers retracted with safety lock pins in place, electric power cables disconnected and stowed away. 4.2 Any defects in crane and equipment are identified, recorded and action is taken in accordance with company procedures, and crane and lifting equipment manufacturers recommendations. 4.3 Lifting equipment is stowed in accordance with company procedures. 4.4 Crane is prepared for travel mode in accordance with manufacturer s recommendations, company procedures and work site rules. 4.5 Travel route is assessed for hazards and obstructions, hazards and obstructions are addressed, and mini-crawler crane is travelled in accordance with manufacturer s operating instructions, company procedures and work site rules. 4.6 Documentation is completed in accordance with company procedures. documentation may include but is not limited to logs, records, job sheets, crane equipment inventories, maintenance requests, plant transfer sheet. Planned review date 31 December 2016 Status information and last date for assessment for superseded versions Process Version Date Last Date for Assessment Registration 1 22 October June 2013 Review 2 15 March 2012 N/A Consent and Moderation Requirements (CMR) reference 0025 This CMR can be accessed at
5 Page 5 of 5 Please note Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment. Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards. Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards. Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements. Comments on this unit standard Please contact at reviewcomments@skills.org.nz if you wish to suggest changes to the content of this unit standard.
NZQA registered unit standard version 2 Page 1 of 5
Page 1 of 5 Title Describe the preparation of, set up, and simultaneously operate, a multi-winch crane during crane operations Level 4 Credits 6 Purpose People credited with this unit standard are able
More informationNZQA registered unit standard version 4 Page 1 of 5. Operate power-operated elevating work platforms (EWP) in an electricity supply environment
Page 1 of 5 Title Operate power-operated elevating work platforms (EWP) in an electricity supply environment Level 3 Credits 5 Purpose People credited with this unit standard are able to: demonstrate knowledge
More informationNZQA registered unit standard version 5 Page 1 of 5. Manage hazard identification and control on plant and machinery
Page 1 of 5 Title Manage hazard identification and control on plant and machinery Level 4 Credits 4 Purpose People credited with this unit standard are able to describe: hazards associated with plant and
More informationNZQA registered unit standard version 4 Page 1 of 5. Carry out switching operations on metal clad switchgear
Page 1 of 5 Title Carry out switching operations on metal clad switchgear Level 4 Credits 3 Purpose People credited with this unit standard are able to: demonstrate knowledge of metal clad switchgear,
More informationNZQA registered unit standard version 4 Page 1 of 5
Page 1 of 5 Title Demonstrate the requirements for holding access permits for work on high voltage electrical lines, cables, and equipment Level 3 Credits 4 Purpose People credited with this unit standard
More informationNZQA registered unit standard version 1 Page 1 of 5. Identify and inspect road safety barrier systems on Infrastructure Works sites
Page 1 of 5 Title Identify and inspect road safety barrier systems on Infrastructure Works sites Level 4 Credits 10 Purpose People credited with this unit standard are able to: identify and explain road
More informationNZQA registered unit standard version 1 Page 1 of 5. Develop, implement and review a HACCP application for a food processing operation
Page 1 of 5 Title Develop, implement and review a HACCP application for a food processing operation Level 5 Credits 20 Purpose This unit standard is for experienced people required to have in-depth knowledge
More informationNZQA registered unit standard 9184 version 6 Page 1 of 5
Page 1 of 5 Title Erect and dismantle non-notifiable prefabricated frame scaffolding up to five metres in height Level 3 Credits 5 Purpose People credited with this unit standard are able to: demonstrate
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Operate timber treatment plant Level 3 Credits 15 Purpose People credited with this unit standard are able to: manage hazards associated with operating and maintaining timber treatment
More informationNZQA registered unit standard version 2 Page 1 of 5
Page 1 of 5 Title Display products in the salon environment Level 2 Credits 3 Purpose This unit standard is for entry-level learners working and intending to work in a salon People credited with this unit
More informationNZQA registered unit standard version 2 Page 1 of 5. Operate x-ray and electronic scanning equipment in a prison environment
Page 1 of 5 Title Operate x-ray and electronic scanning equipment in a prison environment Level 4 Credits 5 Purpose This unit standard is for people working as officers in a prison environment and covers
More informationNZQA registered unit standard 9536 version 5 Page 1 of 6. Undertake petrochemical wellhead maintenance activities under supervision
Page 1 of 6 Title Undertake petrochemical wellhead maintenance activities under supervision Level 3 Credits 4 Purpose This unit standard applies to operational activities carried out on producing wellheads.
More informationNZQA registered unit standard version 3 Page 1 of 5. Infrastructure Works > Civil Plant Operation
Page 1 of 5 Title Operate a motor grader for earthworks Level 3 Credits 20 Purpose People credited with this unit standard are able to: prepare for grader operations; manoeuvre and control grader on site;
More informationNZQA registered unit standard version 3 Page 1 of 5. Install high voltage (HV) electricity network overhead conductors
Page 1 of 5 Title Install high voltage (HV) electricity network overhead conductors Level 4 Credits 8 Purpose People credited with this unit standard are able to: interpret scope of work for installing
More informationNZQA registered unit standard 1512 version 8 Page 1 of 6
Page 1 of 6 Title Supervise asphalt paving construction activities Level 4 Credits 18 Purpose This unit standard is designed for people working in the pavement surfacing industry, towards recognition of
More informationNZQA registered unit standard 9537 version 5 Page 1 of 6. This unit standard applies to operational activities carried out on producing wellheads.
Page 1 of 6 Title Replace faulty petrochemical wellhead equipment Level 4 Credits 8 Purpose This unit standard applies to operational activities carried out on producing wellheads. People credited with
More informationNZQA registered unit standard version 2 Page 1 of 5
Page 1 of 5 Title Assess the optimisation of a drinking-water treatment plant, and describe critical control points Level 5 Credits 10 Purpose People credited with this unit standard are able to: assess
More informationNZQA registered unit standard version 7 Page 1 of 5. Demonstrate and apply knowledge of safeguards for use with portable electrical appliances
Page 1 of 5 Title Demonstrate and apply knowledge of safeguards for use with portable electrical appliances Level 2 Credits 3 Purpose This unit standard covers knowledge of safeguards used in conjunction
More informationNZQA registered unit standard version 5 Page 1 of 5. Carry out the functions of the poleman on a cable harvesting landing
Page 1 of 5 Title Carry out the functions of the poleman on a cable harvesting landing Level 3 Credits 10 Purpose This unit standard is intended for people employed as a poleman in a cable harvesting operation.
More informationNZQA registered unit standard version 4 Page 1 of 5
Page 1 of 5 Title Describe drinking-water supply reticulation systems Level 5 Credits 8 Purpose People credited with this unit standard are able to describe: the reticulated services found on public and
More informationNZQA registered unit standard 9506 version 5 Page 1 of 5. Conduct a sample analysis in a petrochemical laboratory
Page 1 of 5 Title Conduct a sample analysis in a petrochemical laboratory Level 4 Credits 6 Purpose This unit standard is for people employed in the petrochemical industry. People credited with this unit
More informationNZQA registered unit standard 738 version 5 Page 1 of 7
Page 1 of 7 Title Kiln dry timber Level 4 Credits 25 Purpose People credited with this unit standard are able to: demonstrate knowledge of kiln drying operations; demonstrate knowledge of dry and wet bulb
More informationNZQA registered unit standard 6945 version 7 Page 1 of 5. Forestry > Forest Mechanised Harvesting
Page 1 of 5 Title Fell trees using a mechanised harvesting machine Level 4 Credits 20 Purpose This unit standard is intended for people employed in a mechanised tree felling role in a forestry harvesting
More informationNZQA Expiring unit standard version 2 Page 1 of 5. Describe roof membrane preparation and installation procedures
Page 1 of 5 Title Describe roof membrane preparation and installation procedures Level 3 Credits 10 Purpose People credited with this unit standard are able to describe: project planning activities; plywood
More informationNZQA registered unit standard version 3 Page 1 of 5. Demonstrate and apply knowledge of costs to the pricing of a road transport service
Page 1 of 5 Title Demonstrate and apply knowledge of costs to the pricing of a road transport service Level 5 Credits 7 Purpose This unit standard is intended for people who are required to prepare quotes
More informationNZQA registered unit standard version 2 Page 1 of 5. Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident
Page 1 of 5 Title Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident Level 4 Credits 4 Purpose People credited with this unit standard are able to describe: the interrelated
More informationCONSTRUCTION HEALTH AND SAFETY, AND INJURY PREVENTION Prevent hazards when working with cranes, lifting appliances and rigging on construction sites
1 of 7 level: 4 credit: 4 planned review date: December 2003 sub-field: purpose: Construction People credited with this unit standard are able to: identify different types of rigging and lifting work for
More informationNZQA registered unit standard version 2 Page 1 of 5. Apply design principles in the design of scaffolding
Page 1 of 5 Title Apply design principles in the design of scaffolding Level 5 Credits 12 Purpose This unit standard is for people who have intermediate scaffolding skills and who want to develop their
More informationNZQA registered unit standard version 1 Page 1 of 7. Plan and fell trees using advanced techniques in a commercial forest harvesting operation
Page 1 of 7 Title Plan and fell trees using advanced techniques in a commercial forest harvesting operation Level 4 Credits 25 Purpose This unit standard is intended for professional tree fellers in a
More informationRIGGING Complete basic rigging work
1 of 5 level: 2 credit: 35 planned review date: December 2010 sub-field: purpose: entry information: accreditation option: moderation option: Lifting Equipment People credited with this unit standard are
More informationNZQA registered unit standard 5555 version 6 Page 1 of 5
Page 1 of 5 Title Arrange and manage a visitor conference Level 5 Credits 20 Purpose People credited with this unit standard are able to: plan operations for a visitor conference; manage monetary, human
More informationNZQA registered unit standard version 3 Page 1 of 5. Demonstrate and apply advanced knowledge of power system engineering
Page 1 of 5 Title Demonstrate and apply advanced knowledge of power system engineering Level 6 Credits 15 Purpose This unit standard covers knowledge of three-phase power systems with an emphasis on distribution
More informationNZQA registered unit standard version 3 Page 1 of 5
Page 1 of 5 Title Demonstrate and apply knowledge of safe welding principles and quality assurance under supervision Level 2 Credits 4 Purpose This unit standard is for the training of mechanical engineering
More informationNZQA registered unit standard version 5 Page 1 of 6. Assess and manage individual hazardous trees. Forestry > Tree Felling
Page 1 of 6 Title Assess and manage individual hazardous trees Level 4 Credits 15 Purpose People credited with this unit standard are able to: prepare for felling hazardous trees; assess the specific hazard
More informationNZQA registered unit standard version 4 Page 1 of 5. Forestry > Tree Felling
Page 1 of 5 Title Fell trees safely using a chainsaw Level 3 Credits 10 Purpose People completing this unit standard will have the skills required to safely fell individual trees using basic techniques.
More informationNZQA registered unit standard 6405 version 8 Page 1 of 5. Determine advertising options for small business enterprises. Marketing > Generic Marketing
Page 1 of 5 Title Determine advertising options for small business enterprises Level 4 Credits 5 Purpose People credited with this unit standard are able to: identify business and marketing objectives,
More informationNZQA registered unit standard version 3 Page 1 of 5
Page 1 of 5 Title Operate the drill rig for horizontal directional drilling Level 3 Credits 15 Purpose People credited with this unit standard are able to: care for and maintain horizontal directional
More informationNZQA registered unit standard 6973 version 7 Page 1 of 5. Prune plantation trees with a chainsaw from the ground
Page 1 of 5 Title Prune plantation trees with a chainsaw from the ground Level 3 Credits 10 Purpose This unit standard is intended for people employed in a pruning role in a commercial forestry operation.
More informationNZQA registered unit standard version 4 Page 1 of 5
Page 1 of 5 Title Formulate event management strategies and coordinate event management services for a public relations event Level 6 Credits 10 Purpose This unit standard is for people who have, or seek
More informationNZQA registered unit standard version 4 Page 1 of 6. Carry out acceptance, commissioning and maintenance tests on power transformers
Page 1 of 6 Title Carry out acceptance, commissioning and maintenance tests on power transformers Level 4 Credits 6 Purpose People credited with this unit standard are able to: prepare to test power transformers
More informationNZQA Expiring unit standard version 2 Page 1 of 5. Demonstrate knowledge of liquid roof membrane systems
Page 1 of 5 Title Demonstrate knowledge of liquid roof membrane systems Level 2 Credits 6 Purpose People credited with this unit standard are able to demonstrate knowledge: of liquid roof membrane substrates
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Analyse surface material and construction requirements and apply to developed kitchen or bathroom designs Level 5 Credits 10 Purpose This unit standard is for experienced people working
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Slice and package bread in a plant bakery Level 4 Credits 10 Purpose This unit standard is for people working or intending to work in a plant bakery as a baking tradesperson. People credited
More informationNZQA registered unit standard version 3 Page 1 of 5
Page 1 of 5 Title Apply occupational health and safety requirements in the road transport and logistics industry Level 5 Credits 8 Purpose This unit standard is designed for team leaders, despatchers,
More informationNZQA Expiring unit standard version 6 Page 1 of 5. Conduct prisoner and security searches in a prison environment
Page 1 of 5 Title Conduct prisoner and security searches in a prison environment Level 4 Credits 6 Purpose This unit standard is for people working as officers in a prison environment and covers conducting
More informationNZQA registered unit standard 1768 version 5 Page 1 of 6. Title Pilot an overweight load and an overdimension load as a Class 2 certified pilot
Page 1 of 6 Title Pilot an overweight load and an overdimension load as a Class 2 certified pilot Level 4 Credits 10 Purpose This unit standard is for people acting as a Class 2 certified pilot for the
More informationThis unit standard is expiring
Page 1 of 5 Title Apply intelligence analysis techniques to complete an intelligence product Level 5 Credits 15 Purpose People credited with this unit standard are able to: define the intelligence problem
More informationPlan and manage helicopter overhead lines operation
Page 1 of 5 Plan and manage helicopter overhead lines operation Level 5 Credits 10 Purpose People credited with this unit standard are able, for helicopter overhead lines operations, to: plan; organise
More informationNZQA registered unit standard Version 1 Page 1 of 5. Demonstrate operational knowledge of the law in a regulatory compliance context
Page 1 of 5 Title Demonstrate operational knowledge of the law in a regulatory compliance context Level 4 Credits 12 Purpose People credited with this unit standard are able to: demonstrate knowledge of
More informationNZQA registered unit standard version 2 Page 1 of 7. Title Pilot an overweight load and an overdimension load as a Class 1 certified pilot
Page 1 of 7 Title Pilot an overweight load and an overdimension load as a Class 1 certified pilot Level 5 Credits 10 Purpose This unit standard is for people acting as a Class 1 certified pilot for the
More informationNZQA registered unit standard version 3 Page 1 of 5. Carry out automated assembly of wood packaging products
Page 1 of 5 Title Carry out automated assembly of wood packaging products Level 3 Credits 5 Purpose People credited with this unit standard are able to: demonstrate knowledge of the health and safety issues
More informationCarry out routine inspection and servicing on substation emergency services
Page 1 of 6 Carry out routine inspection and servicing on substation emergency services Level 3 Credits 4 Purpose People credited with this unit standard are able to: prepare for inspection and servicing
More informationTrim and limb shelter belts
Page 1 of 5 Trim and limb shelter belts Level 4 Credits 10 Purpose People credited with this unit standard are able to: select and prepare trimming and limbing equipment and machinery; carry out field
More informationGOODS SERVICE Operate a truck mounted sidelifter
1 of 6 level: 3 credit: 6 planned review date: March 2009 sub-field: purpose: entry information: accreditation option: moderation option: Commercial Road Transport People credited with this unit standard
More informationNZQA registered unit standard version 5 Page 1 of 6. Operate hydro-electric generating plant from enterprise control room
Page 1 of 6 Title Operate hydro-electric generating plant from enterprise control room Level 6 Credits 16 Purpose People credited with this unit standard are able to: demonstrate knowledge of the principles
More informationNZQA registered unit standard version 2 Page 1 of 5. Demonstrate knowledge of safety management systems for an aviation environment
Page 1 of 5 Title Demonstrate knowledge of safety management systems for an aviation environment Level 5 Credits 8 Purpose People credited with this unit standard are, for an aviation environment, able
More informationTLILIC3008A Licence to operate a slewing mobile crane (up to 20 tonnes)
TLILIC3008A Licence to operate a slewing mobile crane (up to 20 tonnes) Release: 1 TLILIC3008A Licence to operate a slewing mobile crane (up to 20 tonnes) Modification History Not Applicable Unit Descriptor
More informationThis unit standard is expiring
Page 1 of 5 Title Prepare edible green bovine offal products for packaging Level 2 Credits 10 Purpose This entry level unit standard is for people who are employed in the offal department of meat processing
More informationNZQA registered unit standard version 6 Page 1 of 6
Page 1 of 6 Title Operate hydro-electric generating plant on site Level 4 Credits 8 Purpose People credited with this unit standard are able to: demonstrate knowledge of the principles of hydro-electric
More informationNZQA registered unit standard version 6 Page 1 of 5
Page 1 of 5 Title Demonstrate knowledge of circuit protection Level 3 Credits 3 Purpose This unit standard is for electricians and related trades who need to understand and select devices for the protection
More informationLOGISTICS OPERATIONS Plan distribution centre structure and equipment for a logistics operation
1 of 5 level: 5 credit: 8 planned review date: February 2004 sub-field: purpose: entry information: accreditation option: moderation option: Logistics People credited with this unit standard are able to:
More informationNZQA registered unit standard version 1 Page 1 of 5. Demonstrate knowledge of roof membrane systems
Page 1 of 5 Title Demonstrate knowledge of roof membrane systems Level 3 Credits 6 Purpose This unit standard is intended for use in the training and assessment of people carrying out the installation
More informationCarry out routine maintenance on automotive automatic transmissions
Page 1 of 5 Carry out routine maintenance on automotive automatic transmissions Level 3 Credits 4 Purpose This unit standard is for people in the automotive repair industry. People credited with this unit
More informationNZQA Expiring unit standard version 2 Page 1 of 5. Describe metal roof and wall cladding preparation and installation procedures
Page 1 of 5 Title Describe metal roof and wall cladding preparation and installation procedures Level 3 Credits 10 Purpose People credited with this unit standard are able to describe: the planning and
More informationNZQA registered unit standard version 1 Page 1 of 7. Fell trees in a commercial forest harvesting operation
Page 1 of 7 Title Fell trees in a commercial forest harvesting operation Level 3 Credits 10 Purpose This unit standard is designed for people who work as a tree feller on a day-to-day basis in a commercial
More informationNZQA registered unit standard version 6 Page 1 of 5. Operate biological treatment systems for effluent water in an energy and chemical plant
Page 1 of 5 Title Operate biological treatment systems for effluent water in an energy and chemical plant Level 4 Credits 8 Purpose This unit standard is for people working as boiler operators and energy
More informationNZQA registered unit standard version 1 Page 1 of 5. Construction Trades > Painting and Decorating
Page 1 of 5 Title Apply advanced decorative paint finishes Level 5 Credits 20 Purpose This specialist unit standard is for people working in the painting area of the painting and decorating sector. People
More informationNZQA unit standard version 3 Page 1 of 5
Page 1 of 5 Title Extract stems or logs using a ground based machine Level 4 Credits 20 Purpose This unit standard is intended for the operators of forestry machines used to extract stems or logs from
More informationNZQA registered unit standard version 2 Page 1 of 5. Demonstrate knowledge of forest harvesting operations
Page 1 of 5 Title Demonstrate knowledge of forest harvesting operations Level 5 Credits 8 Purpose People credited with this unit standard are able to: explain the objectives of forest harvesting operations;
More informationNZQA registered unit standard 2930 version 5 Page 1 of 5
Page 1 of 5 Title Develop and coordinate marketing strategies Level 6 Credits 10 Purpose This unit standard is for people who have, or seek responsibility for, or provide advice for, developing the strategic
More informationNZQA registered unit standard version 1 Page 1 of 6. Operate a bitumen distributor for blending and applying bituminous binders
Page 1 of 6 Title Operate a bitumen distributor for blending and applying bituminous binders Level 4 Credits 22 Purpose * Classification People credited with this unit standard are able to: plan and prepare
More informationNZQA registered unit standard version 2 Page 1 of 5. Generate chlorine dioxide for wood pulp bleaching
Page 1 of 5 Title Generate chlorine dioxide for wood pulp bleaching Level 5 Credits 15 Purpose People credited with this unit standard are able to: explain fundamentals of chlorine dioxide generation;
More informationConfirm log grades and scale logs
Page 1 of 5 Confirm log grades and scale logs Level 3 Credits 10 Purpose People credited with this unit standard are able to: manage hazards associated with confirming log grades and scaling logs; demonstrate
More informationNZQA registered unit standard version 2 Page 1 of 5. Describe drinking-water contaminants of public health significance
Page 1 of 5 Title Describe drinking-water contaminants of public health significance Level 4 Credits 8 Purpose People credited with this unit standard are able to describe: the relationship between drinking-water
More informationNZQA registered unit standard version 2 Page 1 of 5. Create appointments and maintain appointment systems and records in the salon environment
Page 1 of 5 Title Create appointments and maintain appointment systems and records in the salon environment Level 3 Credits 5 Purpose This is a practically based unit standard for people who create and
More informationNZQA registered unit standard version 5 Page 1 of 5. Make and repair a boat cockpit canopy and side curtains
Page 1 of 5 Title Make and repair a boat cockpit canopy and side curtains Level 4 Credits 10 Purpose This unit standard is for people who work in the industrial textile fabrication industry. People credited
More informationCarry out general service checks on non-electric forklifts and forklift attachments
Page 1 of 5 Carry out general service checks on non-electric forklifts and forklift attachments Level 3 Credits 4 Purpose This unit standard is for people in the materials handling equipment repair industry.
More informationNational Certificate in Concrete Construction (Sawing and Drilling) (Level 3)
NZQF NQ Ref 1613 Version 1 Page 1 of 6 National Certificate in Concrete Construction (Sawing and Drilling) (Level 3) Level 3 Credits 74 Purpose The National Certificate in Concrete Construction (Sawing
More informationNZQA registered unit standard version 3 Page 1 of 5
Page 1 of 5 Title Carry out carpet repairs and reinstallation Level 3 Credits 8 Purpose This unit standard is for people training for the carpet cleaning industry. People credited with this standard are
More informationNZQA registered unit standard 3851 version 7 Page 1 of 5. Service commercial refrigeration and/or air conditioning systems
Page 1 of 5 Title Service commercial refrigeration and/or air conditioning systems Level 4 Credits 20 Purpose This unit standard is for people who work in the refrigeration and air conditioning sector
More informationDEMOLITION Operate a hydraulic excavator on demolition sites
1 of 7 level: 3 credit: 25 planned review date: November 2007 sub-field: purpose: entry information: accreditation option: moderation option: Civil Works and Services People credited with this unit standard
More informationNZQA registered unit standard version 5 Page 1 of 5
Page 1 of 5 Title Demonstrate knowledge of the prevention and management of Discomfort, Pain and Injury (DPI) in the workplace Level 3 Credits 8 Purpose This unit standard is for people involved in the
More informationNZQA registered unit standard version 2 Page 1 of 5. Complete pre-competition preparations as an official at a competitive sports event
Page 1 of 5 Title Complete pre-competition preparations as an official at a competitive sports event Level 3 Credits 3 Purpose This unit standard is designed primarily for people seeking to further develop
More informationNZQA unit standard version 5 Page 1 of 5. Attach, lift, move, and place loads using mobile plant
Page 1 of 5 Title Attach, lift, move, and place loads using mobile plant Level 3 Credits 10 Purpose People credited with this unit standard are able, using mobile plant, to: prepare for a lift; select
More informationOperate a root crop harvester
Page 1 of 5 Operate a root crop harvester Level 4 Credits 20 Purpose People credited with this unit standard are able to: select and prepare root crop harvesting equipment and machinery; carry out field
More informationPUBLIC SECTOR COMPLIANCE MANAGEMENT Audit quality management systems for compliance with weights and measures legislation
1 of 6 level: 6 credit: 13 planned review date: December 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard
More informationNZQA registered unit standard version 2 Page 1 of 5. Select and use tools and workshop equipment in the industrial textile fabrication industry
Page 1 of 5 Title Select and use tools and workshop equipment in the industrial textile fabrication industry Level 3 Credits 6 Purpose This unit standard is for people entering or working in the industrial
More informationNZQA registered unit standard version 1 Page 1 of 5. Demonstrate and apply knowledge of maintenance plans for mechanical equipment and plant
Page 1 of 5 Title Demonstrate and apply knowledge of maintenance plans for mechanical equipment and plant Level 5 Credits 8 Purpose This unit standard is for people who carry out maintenance on mechanical
More informationNZQA Expiring unit standard 2272 version 8 Page 1 of 5
Page 1 of 5 Title Print single colour work on a reel-fed printing press Level 3 Credits 20 Purpose People credited with this unit standard are able to: demonstrate knowledge of factors affecting printing
More informationNZQA registered unit standard version 2 Page 1 of 6. Demonstrate professional and ethical behaviour as an engineering technician
Page 1 of 6 Title Demonstrate professional and ethical behaviour as an engineering technician Level 6 Credits 15 Purpose This unit standard is intended for people working towards the New Zealand Diploma
More informationNZQA Expiring unit standard 3885 version 8 Page 1 of 5. Demonstrate knowledge of and use an oxy-acetylene welding plant in the motor body industry
Page 1 of 5 Title Demonstrate knowledge of and use an oxy-acetylene welding plant in the motor body industry Level 2 Credits 4 Purpose This unit standard is for people who are at pre-employment level or
More informationELECTRICITY SUPPLY - POWER SYSTEM MAINTENANCE Carry out routine inspection and servicing on high voltage minimum oil circuit breakers
1 of 9 level: 4 credit: 6 planned review date: December 2006 sub-field: purpose: entry information: Electricity Supply People credited with this unit standard are able to: prepare for inspection, testing
More informationNZQA unit standard version 1 Page 1 of 5
Page 1 of 5 Title Apply safe working procedures and practices in an electrotechnology environment and identify and control special hazards Level 3 Credits 5 Purpose This unit standard is designed to meet
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Demonstrate knowledge of electric lighting systems Level 3 Credits 6 Purpose This unit standard covers knowledge of electric lighting for electricians and related trades. People credited
More informationNZQA registered unit standard version 1 Page 1 of 6. Demonstrate knowledge of managing conflict situations in a security context
Page 1 of 6 Title Demonstrate knowledge of managing conflict situations in a security context Level 2 Credits 4 Purpose This unit standard covers knowledge of conflict management for security personnel.
More informationROAD TRANSPORT OPERATIONS Manage the transport of overdimension and overweight loads by road
1 of 7 level: 5 credit: 10 planned review date: July 2009 sub-field: purpose: Commercial Road Transport This unit standard is intended for people who are involved with managing the despatch and/or supervision
More informationPeople who are awarded this qualification have broad knowledge and skills in all aspects of concrete construction.
NZQF NQ Ref 1634 Version 1 Page 1 of 9 National Certificate in Concrete Construction (Level 4) Level 4 Credits 203 Purpose The National Certificate in Concrete Construction (Level 4) [Ref: 1634] is designed
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Demonstrate knowledge of Micro-Hydro Systems Level 4 Credits 15 Purpose This unit standard is for people who work with renewable energy systems and covers knowledge of the design and
More informationNZQA Expiring unit standard 3713 version 7 Page 1 of 6. Print single colour work on a sheet-fed registering offset press
Page 1 of 6 Title Print single colour work on a sheet-fed registering offset press Level 3 Credits 10 Purpose People credited with this unit standard are able to: demonstrate knowledge of factors affecting
More information