DC/DC Converter PV200-27Bxx Series

Transcription

1 New energy over wide and over high input voltage isolation converter FEATURES Ultra wide input voltage range: VDC 4000VAC high isolation voltage Industrial grade operating temperature: -40 to +70 High efficiency, Low ripple & noise Input under-voltage protection, reverse input voltage protection, Output short circuit, over-current, over-voltage protection High reliability, Long lifespan RoHS Meets EN62109 standards (Pending) PV200-27Bxx series -----is ultra wide input voltage regulated DC-DC converter, which has advantages such as high efficiency, high reliability and high safety isolation. The series products are widely used in industries such as photo voltaic power generation, stored energy and high voltage frequency conversion, provide a stable operating voltage for the load device, Its multiple protection features can enhance the safety performance of the module power supply and the load under abnormal working conditions. Selection Guide Certification Part No. Output Power Nominal Output Voltage and Current (Vo/Io) Efficiency (600VDC, %/Typ.) Max. Capacitive Load(µF) PV200-27B12 120W 12V/10A CE (Pending) PV200-27B15 150W 15V/10A PV200-27B24 24V/8.333A PV200-27B26 200W 26V/7.692A PV200-27B48 48V/4.166A Input Specifications Input Voltage Range VDC Input current 250VDC VDC VDC VDC A Inrush current Input under-voltage protection External input fuse Hot Plug 600VDC VDC Under-voltage protection begins Under-voltage protection release Under-voltage protection begins Under-voltage protection release A/1000VDC, necessary Unavailable VDC Output Specifications Output Voltage Accuracy -- ±2 -- Line Regulation Full load -- ± % Load Regulation 0% - 100% load -- ±2 -- Ripple & Noise* 20MHz bandwidth (peak-peak value) mv Temperature Drift Coefficient -- ± %/ Short Circuit Protection Over-current Protection Hiccup, Continuous, self-recovery 110%Io, hiccup, self-recovery Over-voltage Protection 12V output 20VDC or hiccup protection A/1 Page 1 of 5

2 15V output 25VDC or hiccup protection 24V output 33VDC or hiccup protection 26V output 35VDC or hiccup protection Over-voltage Protection 48V output 60VDC or hiccup protection Min. Load Trim Output power unchanging ±10 % Hold-up Time Room temperature, Full load 600VDC input VDC input ms Note: * Ripple and noise are measured by Contact measuring method method, please see AC-DC Converter Application Notes for specific operation. General Specifications Input - Test time: 1min, Leakage current 5mA VAC Isolation Voltage Input - PE Test time: 1min, Leakage current 10mA Output - PE Test time: 1min, Leakage current 5mA VDC Operating Temperature Storage Temperature Storage Humidity %RH -40 to to %/ Power Derating +50 to VDC-250VDC VDC-300VDC %/VDC Switching Frequency khz Safety Certification EN62109 (Pending) MTBF MIL-HDBK-217F@25 300,000 h Physical Specifications Casing Material Dimensions Weight Cooling method Meta *121.35*42.50mm 1000g (Typ.) Free air convection EMC Specifications CE CISPR32/EN55032 CLASS A EMI RE CISPR32/EN55032 CLASS A ESD IEC/EN Contact ±6KV/Air ±8KV Perf. Criteria B RS IEC/EN V/m perf. Criteria A EMS EFT IEC/EN ±2KV perf. Criteria B Surge IEC/EN line to line ±1KV/line to ground±2kv perf. Criteria B CS IEC/EN Vr.m.s perf. Criteria A A/1 Page 2 of 5

3 Product Characteristic Curve Note: 1When input VDC(), VDC(), it need to be voltage derated on basis of temperature derating; 2This product is suitable for use in natural air cooling environments, if in a closed environment, please contact our company s FAE. Wiring Description 1. No. No. 1 VIN+ Input (+) 9 NC 2 NC 3 NC 10 NC 11 NC 4 VIN- Input (-) 12 NC 5 NC 6 NC 7 PE 8 NC 2.Wiring diagram Protective grounding 13 NC 14 NC 15 NC 16 Trim Adjustable Output Voltage No. 17 Vo- Load output (-) 18 Vo- Load output (-) 19 Vo- Load output (-) 20 Vo+ Load output (+) 21 Vo+ Load output (+) 22 Vo+ Load output (+) A/1 Page 3 of 5

4 Design Reference 1. Application of Trim and calculation of Trim resistance +Vot +Vot R3 Trim R3 RT Trim RT 0V 0V Trim up Trim down Applied circuits of Trim (Part in broken line is the interior of models) Calculation formula of Trim resistance: a up: R T= -R 3 a= -a Vot- a Vot- down: R T= -R 3 a= -a RT is Trim resistance a is a self-defined parameter, with no real meaning. Vout (KΩ) (KΩ) R3(KΩ) (V) Vot(V) 12V V V V V Output voltage after regulation, variation ±10% 2.For more information Please find the application note on Dimensions and Recommended Layout A/1 Page 4 of 5

5 Note: 1. Packing information please refer to Product Packing Information which can be downloaded from Packing bag number of Horizontal package: ; 2. Unless otherwise specified, data in this datasheet should be tested under the conditions of Ta=25 C, humidity<75% when inputting nominal voltage and outputting rated load; 3. All index testing methods in this datasheet are based on our Company s corporate standards; 4. We can provide product customization service, please contact our technicians directly for specific information; 5. Products are related to laws and regulations: see "Features" and "EMC"; 6. Our products shall be classified according to ISO14001 and related environmental laws and regulations, and shall be handled by qualified units. Mornsun Guangzhou Science & Technology Co., Ltd. Address: No. 5, Kehui St. 1, Kehui Development Center, Science Ave., Guangzhou Science City, Luogang District, Guangzhou, P. R. China Tel: Fax: info@mornsun.cn A/1 Page 5 of 5