Repetition: Electrochemistry
|
|
- Camron Fitzgerald
- 5 years ago
- Views:
Transcription
1 Repetition: Electrochemistry Process types Cathodic deposition Anodic oxidation Electroless deposition
2 Repetition: Cathodic Deposition Basic set up Potential curve - + U(x) - Me + S K 300 nm Cathode fall: cathode screened by positive ions + A x Basic characteristics: Metallic substrates Mostly aqueous solutions Narrow parameter window in T Large parameter window of chemical additives
3 Repetition: Anodic Oxidation Chemistry: kJ 2Al + 3O Al 2 O 3 Alumina grows to thick films, because pores enable contact to the metallic substrate. The initially porous coating can be infiltrated and colored. Afterwards it is densified. The method is extremely shape conserving. No additional coating is deposited, only the substrate material is transformed.
4 Repetition: Electroless Deposition + Reduction of metal ions by electrons which are supplied by a reagens introduced into the solution. + The reaction takes place only at a catalytic surface (metal surface, because electrons can easily be set free). + To sustain the deposition process, the deposited material has to be auto-catalytic. + If there is no catalytic surface (insulator): activation by PdCl 2 or SnCl 2 ; Pd or Sn are directly deposited on the surface. They act catalytically. + Reagences: Natrium-Hypophosphite: Ni, Co Natrium-Boron Hydride: Ni, Au Dimethylaminborane: Ni, Co, Au, Cu, Ag Hydrazine: Ni, Au, Pd Formaldehyde: Cu
5 Thermal Spraying: Process Types Thermal spraying High velocity spraying Detonation spraying Arc discharge spraying Cold gas spraying Further Information: Gesellschaft thermisches Spritzen (Society of Therrmal Spraying, in German)
6 Thermal Spraying With Wire 1. Acetylene/Oxygen 2. Wire or stick 3. Burner nozzle 4. Acetylene/Oxygen flame with spray particles 5. Substrate
7 Thermal Spraying With Powder 1. Acetylene/Oxygen 2. Powder container 3. Burner nozzle 4. Carrier gas+powder 5. Acetylene/Oxygen flame with spray particles 6. Substrate
8 High Velocity Spraying (HVOF) HVOF=High Velocity Oxygen Fuel 1. Burner gas/oxygen 2. Powder 3. Burner nozzle with/without water cooling 5. Burner gas /Oxygen flame with spray particles 6. Substrate
9 Detonation Spraying 1. Acetylene 2. Oxygen 3. Nitrogen 4. Powder 5. Ignition device ("Spark plug") 6. Water cooled exit pipe 7. Substrate
10 Plasma Spraying 1. Inert gas 2. Cooling water 3. DC current 4. Pulverized spray material 5. Cathode 6. Anode 7. Substrate
11 Cold Gas Spraying 1. Carrier gas 2. Heating elements 3. Powder supply 4. Supersonic nozzle 5. Spray stream 6. Coating 7. Substrate
12 Thermal Spraying: Process Characteristics Thermal spraying HVOF High Vel.- spray Detonation spray Arc spray Atmos. Plasmaspr. Vacuum Plasmaspr. Gas Temperature [ C] Particle velocity [m/s] Adhesion [Nmm -2 ] 8 >70 > >70 Oxide content [%] ppm Porosity [%] <0.5 Spray flow [kg/h] Relative costs [1=low]
13 Thermal Spraying: Fundamentals Partially melted droplet hits substrate: d ρ "Sombrero Morphology" D S D d ρ ρ = 1,3 µ S v i 0,2 ρ = Density of melt v i = Impact velocity µ = Viscosity of melt
14 Thermal Spray: Coating Morphology 200 µm 500 µm
15 Thermal Spray: Applications Automotive Medical Industry Home
16 Mechanical Plating Packaging into protective sheets Welding to distance frame 1. Base material (substrate) 2. Coating material 3. Separation layer (Glas wool, MgO or Al 2 O 3 ) 4. Sheet, closed by crimping or welding 5. Welded distance frame 6. Weld seam 7. Evacuation pipe
17 Detonation Plating 1. Base material (Substrate) 2. Distance 3. Coating material 4. Ignition device 5. Explosive material 6. Plated coating material 7. Accelerated coating material 8. Detonation residues 9. Detonation front 10. Unburnt detonation material 11. Wavy transition zone 12. Material stream with high velocity 13. Shock front in air
18 Build Up Welding: Process Types Flame Build Up Welding Arc Build Up Welding Sub Powder (UP) Build Up Welding Plasma Build Up Welding Laser Build Up Welding
19 Flame Build Up Welding Gas-powder-process
20 Arc Build Up Welding Tungsten-Inert gas-process ("WIG") Metal-Inert gas-process ("MIG")
21 Sub Powder (UP) Build Up Welding Band electrode 1. Power supply 2. Band electrode 3. Band feed 4. Contact clamps 5. Loose powder 6. Cinder 7. Coating 8. Substrate Double band
22 Plasma Build Up Welding Powder Wire (Plasma-MIG) Plasma-Hot Wire 1. Tungsten cathode 6. RF generator (for ignition) 2. Argon 7. Coating 3. Welding powder 8. Base Material 4. Welding wire 9. Hot wire-power supply 5. Hot wire 10. Oscillating movement
23 Laser Build Up Welding I Welding powder Laser Low thermal load of substrate Thin, but existing bond zone (some µm) Possibility to create complex shapes
24 Laser- Build Up Welding II WC-particles in Ni-matrix Laser trace Base material Base material is not deformed, but a thin bond zone is clearly visible. The resulting compound has excellent properties.
25 Laser Build Up Welding : 3d-Objects 3d-Pile On Weld powder Laser 3d-shape Finished Object Low thermal load of substrate Thin, but existing bond zone (some µm) Possibility to create complex shapes
26 Melt Dipping Dipping of workpiece through flow agent film Flow agent attatched to workpiece in advance Anti corrosion coatings (e. g.: Zn) Zn is sacrificial layer, i. e. it is consumed with a rate of 2-8µm/year Consumption rate depends on environmental conditions (SO 2 ).
THERMAL SPRAY COATINGS
THERMAL SPRAY COATINGS THERMAL SPRAY is a group of processes in which metals, alloys, ceramics, plastics and composite materials in the form of powder, wire, or rod are fed to a torch or gun with which
More informationMETHODS OF COATING FABRICATION
METHODS OF COATING FABRICATION Zbigniew Grzesik http://home.agh.edu.pl/~grzesik Department of Physical Chemistry and Modelling DEFINITION The coating is the thin outer layer of the object, which physiochemical
More informationLecture-52 Surface Modification Techniques: HVOF and Detonation Spraying
Fundamentals of Surface Engineering: Mechanisms, Processes and Characterizations Prof.D.K. Dwivedi Department of Mechanical and Industrial Engineering Indian Institute of Technology-Roorkee Lecture-52
More informationLaser assisted Cold Spray
2009-02-16 Laser assisted Cold Spray Andrew Cockburn, Matthew Bray, Rocco Lupoi Bill O Neill Innovative Manufacturing Research Centre (IMRC) Institute for Manufacturing, Department of Engineering, University
More informationAnalysis of Surface Properties of Al 2 O 3 Coating over Mild Steel Using Plasma Spray Process
Analysis of Surface Properties of Al 2 O 3 Coating over Mild Steel Using Plasma Spray Process I Arul raj 1, S Ramachandran 2 Research scholar, Faculty of Mechanical Engineering, Sathyabama University,
More informationManufacturing Process-I Prof. Dr. D.K. Dwivedi Department of Mechanical and Industrial Engineering Indian Institute of Technology, Roorkee
Manufacturing Process-I Prof. Dr. D.K. Dwivedi Department of Mechanical and Industrial Engineering Indian Institute of Technology, Roorkee Module - 03 Lecture - 02 Welding Process Classification Welcome
More informationStructure of Metals 1
1 Structure of Metals Metals Basic Structure (Review) Property High stiffness, better toughness, good electrical conductivity, good thermal conductivity Why metals have these nice properties - structures
More informationAdvances in high velocity oxygen fuel spraying enhance long-term durability in Bosch Rexroth large hydraulic cylinder rods
profile Drive & Control Technical Article Advances in high velocity oxygen fuel spraying enhance long-term durability in Bosch Rexroth large hydraulic cylinder rods Gas Temperature (10 3 ºF) 30 25 20 15
More informationCONTENTS. Preface to the 3rd Edition Acknowledgments
CONTENTS Preface to the 3rd Edition Acknowledgments vii ix CHAPTER 1 INTRODUCTION 1 1.1 Definition of materials degradation 1 1.2 Definition and significance of surface engineering 4 1.3 Classification
More informationCold Spray - Improved Corrosion and Wear Resistant Coatings by Cold Spray
PUBLISHABLE SUMMARY 19043 Background With the high price of corrosion and wear resistant alloys in bulk form, there are major financial incentives to use coated, lower cost substrates. However, despite
More informationWELDING TECHNOLOGY AND WELDING INSPECTION
WELDING TECHNOLOGY AND WELDING INSPECTION PRESENTED BY: GOPAL KUMAR CHOUDHARY SVL ENGINEERING SERVICES CHENNAI CONTENTS: DEFINATION TYPES OF WELDING ELECTRODE GEOMETRY EQUIPMENT QUALITY PROCESS SAFETY
More informationLecture 23. Chapter 30 Fusion Welding Processes. Introduction. Two pieces are joined together by the application of heat
Lecture 23 Chapter 30 Fusion Welding Processes Introduction Fusion welding Two pieces are joined together by the application of heat Melting and fusing the interface Filler metal Extra metal added (melted)
More informationneeded for the SOFC electrolyte membrane application. Few directed vapor deposition
Chapter 3 Experimental Procedure 3.1 Overview Prior to this study, DVD has not been used to create the type of dense metal oxide layers needed for the SOFC electrolyte membrane application. Few directed
More informationInstitute for Diagnostic Imaging Research
Institute for Diagnostic Imaging Research (Repair applications of the LPCS process) Roman Gr. Maev, Emil Strumban, Volf Leshchinskiy, and Dmitry Dzhurinskiy CSAT 2014, Worcester, MA Low Pressure Cold Spray
More informationHARD CHROME REPLACEMENT
bv Impact 4, 6921 RZ Duiven P.O. Box 1027, 6920 BA Duiven The Netherlands Tel: +31 263190140 Fax: +31 263190141 E-mail: info@fst.nl Homepage: www.fst.nl Inc. 3040 Charlevoix Dr. SE Suite 203 I Grand Rapids,
More informationUpon completion of this module
Welding 1.4 Upon completion of this module 1. Cite the advantages of welding over other joining methods 2. Name & identify the various welding and cutting processes currently used in industry 3. Recognize
More informationThermal spraying Terminology, classification
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 14917 Second edition 2017-03 Thermal spraying Terminology, classification Projection thermique Terminologie, classification Reference number ISO
More informationTitanium Welding Technology
UDC 669. 295 : 621. 791. 754 Titanium Welding Technology Tadayuki OTANI* 1 Abstract In order to establish titanium welding technology TIG arc weldability and MIG arc weldability were surveyed. For TIG
More informationExercises in Welding Process and Equipment --- Part 4: Cutting Process and Equipment ---
JICA_OHJI Exercises in Welding Process and Equipment --- Part 4: Cutting Process and Equipment --- Takayoshi OHJI Professor Emeritus, Osaka University Dr. of Engineering VIRTUAL WELD CO.,LTD t-ohji@alvec.co.jp
More informationImprovement of corrosion resistance of HVOF thermal sprayed coatings by gas shroud
Improvement of corrosion resistance of HVOF thermal sprayed coatings by gas shroud Jin Kawakita, Takeshi Fukushima, Seiji Kuroda, and Toshiaki Kodama National Research Institute for Materials Science Abstract
More informationThermal Durability and Abradability of Plasma Sprayed Al-Si-Polyimide Seal Coatings p. 85
Trends in Automotive Applications of Thermal Spray Technology in Japan p. 1 Production Plasma in the Automotive Industry: A European Viewpoint p. 7 The Effect of Microstructure on the Wear Behavior of
More informationInterfacial state and characteristics of cold-sprayed copper coatings on aluminum substrate
IOP Conference Series: Materials Science and Engineering OPEN ACCESS Interfacial state and characteristics of cold-sprayed copper coatings on aluminum substrate To cite this article: Yuichiro Yamauchi
More informationHigh Rate Zinc Oxide Film Deposition by Atmospheric TPCVD Using Ar/Air Plasma Jets
High Rate Zinc Oxide Film Deposition by Atmospheric TPCVD Using Ar/Air Plasma Jets ANDO Yasutaka*, KOBAYASHI Akira**, TOBE Shogo* and TAHARA Hirokazu*** Abstract In order to develop a functional film deposition
More informationThermal Evaporation. Theory
Thermal Evaporation Theory 1. Introduction Procedures for depositing films are a very important set of processes since all of the layers above the surface of the wafer must be deposited. We can classify
More informationMaterial Product Data Sheet Tungsten Carbide Nickel Chromium Self-Fluxing Powders
Material Product Data Sheet Tungsten Carbide Nickel Chromium Self-Fluxing Powders Thermal Spray Powder Products: Metco 31C-NS, Metco 32C, Metco 34F, Metco 34FP, Metco 36C, WOKA 7701, WOKA 7702, WOKA 7703,
More informationJānis Grabis. Plasma chemical synthesis of multicomponent nanopowders, their characteristics, and processing
Jānis Grabis Plasma chemical synthesis of multicomponent nanopowders, their characteristics, and processing Outline Introduction nanoparticles, their preparation methods Experimental synthesis of multicomponent
More informationAnti - Corrosive Finishing
MSSA Metal Spray Supplies Australia P.O. Box 954 A.B.N. 80 403 448 834 Capalaba Unit 3/37 Veronica Street Queensland 4157 Capalaba, Brisbane Australia Australia Ph: (07) 3823 1004 Fax: (07) 3823 1005 Int
More informationMobile repair of hard coated rolls and machine components. ICE Europe Technical Program, Dr. A. Barth,
Mobile repair of hard coated rolls and machine components ICE Europe Technical Program, Dr. A. Barth, 22.03.2017 Technological Competence and Scope Full Service Surface Technology Surface Treatments Mechanical
More informationPlasma welding State of the Art
Plasma State of the Art Böhme Dieter 1), Cramer Heidi 2) SLV Munich, Germany Email: 1) boehme.dieter@web.de; 2) cramer@slvmuenchen.de Keywords Principle of the process, different plasmaprocesses, the plasma
More informationCopyright 1999 Society of Manufacturing Engineers FUNDAMENTAL MANUFACTURING PROCESSES Welding NARRATION (VO):
Copyright 1999 Society of Manufacturing Engineers --- 1 --- FUNDAMENTAL MANUFACTURING PROCESSES Welding SCENE 1. CG: Fusion Welding Processes white text centered on black SCENE 2. tape 528, 14:18:33-14:18:52
More informationThe Effect of Fracture Toughness on the Deposition Efficiency of Ceramic Particles in Cold Spray
The Effect of Fracture Toughness on the Deposition Efficiency of Ceramic Particles in Cold Spray Yik Tung Roy Lee Sayed Hossein Ashrafizadeh Dr. Gary Fisher Dr. André G. McDonald Introduction Metal Matrix
More informationMetallization deposition and etching. Material mainly taken from Campbell, UCCS
Metallization deposition and etching Material mainly taken from Campbell, UCCS Application Metallization is back-end processing Metals used are aluminum and copper Mainly involves deposition and etching,
More informationPrevious Lecture. Vacuum & Plasma systems for. Dry etching
Previous Lecture Vacuum & Plasma systems for Dry etching Lecture 9: Evaporation & sputtering Objectives From this evaporation lecture you will learn: Evaporator system layout & parts Vapor pressure Crucible
More informationIntroduction to Welding Technology
Introduction to Welding Technology Welding is a fabrication process used to join materials, usually metals or thermoplastics, together. During welding, the pieces to be joined (the workpieces) are melted
More informationResearch on Using Plasma Thermal Spraying Technology for Enameling
Research on Using Plasma Thermal Spraying Technology for Enameling Liang Menglin 1 Chen Anming 1 Wang Haiyun 1 Zeng Dayan 2 Yin Yehao 2 (1.Hunan Lifa Glaze Technologies Co., Xiangtan City, Hunan Province,
More informationStudy of the characteristic of droplet transfer in laser-mig hybrid welding based on the phase matching control of laser pulse and arc waveform
ICCM2015, 14-17 th July, Auckland, NZ Study of the characteristic of droplet transfer in laser-mig hybrid welding based on the phase matching control of laser pulse and arc waveform *G. Song¹, J.Wang¹,
More informationInfluence of Spraying Conditions on Properties of Zr-Based Metallic Glass Coating by Gas Tunnel Type Plasma Spraying
Influence of Spraying Conditions on Properties of Zr-Based Metallic Glass by Gas Tunnel Type Plasma Spraying KOBAYASHI Akira *, KURODA Toshio *, KIMURA Hisamichi ** and INOUE Akihisa ** Abstract Metallic
More informationUSN. Hosur : 6A/6B/6C 10ME665. Discuss briefly. 1 a.
USN 1 P E PESIT Bangalore South Campus Hosur road, 1km before Electronic City, Bengaluru -100 Department of Mechanical Engineering INTERNAL ASSESSMENT TEST 3 Solutions Subject & Code : NTM 10ME665 Name
More informationThe Many Facets and Complexities of 316L and the Effect on Properties
The Many Facets and Complexities of 316L and the Effect on Properties Ingrid Hauer Miller Höganäs AB, Höganäs, Sweden state and country Ingrid.hauer@hoganas.com, +46702066244 Abstract One of the most widely
More informationMaterial Product Data Sheet Cobalt Chromium (Nickel) Tungsten Carbon Alloy Powders
Material Product Data Sheet Cobalt Chromium (Nickel) Tungsten Carbon Alloy Powders Thermal Spray Powder Products: Amdry MM509, Amdry X40, Metco 45C-NS, Metco 45VF-NS, Diamalloy 4060NS 1 Introduction Oerlikon
More informationCORROSION PROPERTIES OF CERMET COATINGS SPRAYED BY HIGH-VELOCITY OXYGEN-FUEL. Dragos UŢU, Iosif HULKA, Viorel-Aurel ŞERBAN, Hannelore FILIPESCU
Abstract CORROSION PROPERTIES OF CERMET COATINGS SPRAYED BY HIGH-VELOCITY OXYGEN-FUEL Dragos UŢU, Iosif HULKA, Viorel-Aurel ŞERBAN, Hannelore FILIPESCU Politehnica University of Timisoara, Romania, dragosutu@yahoo.com,
More informationEnhancing Wear Resistance of Grey Cast Iron Using Al 2 O 3-13TiO 2 and Ni20Cr Coatings
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) ISSN: 2278-1684 Volume 4, Issue 1 (Nov-Dec. 2012), PP 13-17 Enhancing Wear Resistance of Grey Cast Iron Using Al 2 O 3-13TiO 2 and Ni20Cr Coatings
More informationStudy of Nozzle Clogging During Cold Spray
Study of Nozzle Clogging During Cold Spray Presenter: Matt Siopis UTRC Team Members: A. Nardi, A. Espinal, L. Binek, T. Landry Portions of this Research were sponsored by the Army Research Laboratories
More informationCOMPARISON OF WELDING/BONDING METHODS
TYPE OF WELDING/BONDING Adhesive Bonding Diffusion Welding Electron Beam Welding Explosive Welding SUMMARY ADVANTAGES DISADVANTAGES Bond is established through use of an intermediate adhesive layer applied
More informationExamination of tribological properties of oxide-polymer and carbide-polymer coatings formed by flame, plasma and HVOF spray processes
Examination of tribological properties of oxide-polymer and carbide-polymer coatings formed by flame, plasma and HVOF spray processes R. Samur 1, H. Demirer 2 1 Department of Metallurgy, Faculty of Technical
More informationProduct Data Sheet Martensitic Matrix Hardfacing Alloy with Fine Scale, Extremely Hard Molybdenum Borides and Vanadium Carbides
Product Data Sheet Martensitic Matrix Hardfacing Alloy with Fine Scale, Extremely Hard Molybdenum Borides and Vanadium Carbides Powder Products: Metco 1030A, Metco 1030B Wire Products: Metco 8224 US patent
More informationFine-Tune Your Knowledge On The Metallizing Process
Fine-Tune Your Knowledge On The Metallizing Process 1. What is Metallizing? Metallizing is a common term used to describe thermal sprayed metal coatings. For corrosion protection of steel elements, it
More informationCladding with High Power Diode Lasers
White Paper Cladding with High Power Diode Lasers Cladding is a well established process used in a variety of industries for improving the surface and near surface properties (e.g. wear, corrosion or heat
More informationGMAW (MIG) / FCAW / MCAW
Welding Processes GMAW () / FCAW / MCAW Gas Metal Arc Welding (GMAW), Flux Cored Arc Welding (FCAW) and Metal Cored Arc Welding (MCAW) Gas Metal Arc Welding (GMAW) GMA commonly referred to as Metal Inert
More informationElectric Arc Welding
Electric Arc Welding Electricity is passed through an electrode which jumps between the electrode and the work piece. This causes an arc which produces great heat melting the electrode and the work piece
More informationGAS METAL ARC WELDING (GMAW)
GAS METAL ARC WELDING (GMAW) INTRODUCTION Gas Metal Arc Welding (GMAW) is also called Metal Inert Gas (MIG) arc welding. It uses consumable metallic electrode. There are other gas shielded arc welding
More informationManufacturing Process II. Welding Processes-1
Manufacturing Process II Welding Processes-1 1. Introduction: The term joining is generally used for welding, brazing, soldering, and adhesive bonding, which form a permanent joint between the parts a
More informationCost-efficient wear / corrosion protective coatings using High Velocity Oxy Fuel Wire Spraying
Published Technical Paper Int. Conference EUROMAT 99 in Munich, Sept. 1999 Cost-efficient wear / corrosion protective coatings using High Velocity Oxy Fuel Wire Spraying Johannes Wilden, Andreas Wank Institute
More informationDEPOSITION OF ALUMINA (ALUMINUMOXIDE) NANOLAYER USING PLASMA TORCH
DEPOSITION OF ALUMINA (ALUMINUMOXIDE) NANOLAYER USING PLASMA TORCH *Yousefzadeh M. 1, Sobhanian S. 2 and Naghshara H. 3 1 Department of Physics, East Azarbaijan Sience and Research Branch, Islamic Azad
More informationElectroplating. Copyright 2016 Industrial Metallurgists, LLC
Electroplating Northbrook, IL 847.528.3467 www.imetllc.com Copyright 2016 Industrial Metallurgists, LLC Course content 1. Process Steps (75 minutes) 2. Properties, Defects, and Evaluation (60 minutes)
More informationDRY SLIDING WEAR PERFORMANCE OF THERMAL SPRAYED MICRO- NANO BORON CARBIDE COATING ON 410 GRADE STEEL
DRY SLIDING WEAR PERFORMANCE OF THERMAL SPRAYED MICRO- NANO BORON CARBIDE COATING ON 410 GRADE STEEL K. V. Sreenivas Rao, Girisha K. G. and Anil K. C. Akash R&D Center, Department of Mechanical Engineering,
More informationA Comparative Study for Wear Resistant of Multiple coating on Steel Alloy faces produced by hot spray
Research Article International Journal of Multidisciplinary and Scientific Emerging Research 214 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/international-journal-of-multidisciplinary-andscientific-emerging-research/
More informationCutting Tool Materials and Cutting Fluids. Dr. Mohammad Abuhaiba
Cutting Tool Materials and Cutting Fluids HomeWork #2 22.37 obtain data on the thermal properties of various commonly used cutting fluids. Identify those which are basically effective coolants and those
More informationShrouding of Thermal Plasma Jets Generated by Gas-Water Torch
WDS'05 Proceedings of Contributed Papers, Part II, 337 342, 2005. ISBN 80-86732-59-2 MATFYZPRESS Shrouding of Thermal Plasma Jets Generated by Gas-Water Torch T. Kavka, M. Hrabovsky, O. Chumak, and V.
More informationBeveling procedures and beveling machines beveling, a quick overview 1
Beveling procedures and beveling machines 2018 beveling, a quick overview 1 Index 1. Fields of application S. 3 2. Welding procedures S. 8 3. Weld forms S. 9 4. Geometry of a bevel S. 13 5. User groups
More informationWater Erosion Experiment Update. T.Davenne O.Caretta S.Bennetton 5 th Dec 2013
Water Erosion Experiment Update T.Davenne O.Caretta S.Bennetton 5 th Dec 2013 Motivation ISIS water cooled tungsten targets are clad with tantalum to avoid tungsten corrosion problems that occur when in
More informationINTRO TO THERMAL SPRAY
INTRO TO THERMAL SPRAY Thermal Spray is a process were a material heated and propelled in a gas stream on to a substrate forming splats. The splats build up to create a coating. What is Thermal Spray?
More informationThermal Spray Coatings in Severe Service Elaine Motyka 3/2/2017
Thermal Spray Coatings in Severe Service Elaine Motyka 3/2/2017 In this session Basics of Thermal Spray Coatings Defining Thermal Spray Common processes Coating microstructures Properties affected by process
More informationSpectroscopy Performance Note
Spectroscopy Performance Note QDP Analysis of Galvanized Steel Galvanizing Thickness and Coating Weight Composition on the Coating and Substrate Surface Treatments The application of zinc and zinc-alloy
More informationATZ Entwicklungszentrum Expose
Our Objective Our Focus Our Scale Our Approach Processes & Materials for Energy Technology Energy from Biomass Wear an Corrosion Protection in Energy Technology Process Development up to Pilot Scale Plants
More informationComparison of Titanium Cold Spray Coatings
Comparison of Titanium Cold Spray Coatings U.S. Army Research, Development and Engineering Command Brian M. Gabriel Matthew D. Trexler Victor K. Champagne US Army Research Laboratory Aaron Nardi United
More informationWelding Processes. Consumable Electrode. Non-Consumable Electrode. High Energy Beam. Fusion Welding Processes. SMAW Shielded Metal Arc Welding
Fusion Consumable Electrode SMAW Shielded Metal Arc Welding GMAW Gas Metal Arc Welding SAW Submerged Arc Welding Non-Consumable Electrode GTAW Gas Tungsten Arc Welding PAW Plasma Arc Welding High Energy
More informationDr. M. Sayuti, ST.,M.Sc JURUSAN TEKNIK INDUSTRI FAKULTAS TEKNIK UNIVERSITAS MALIKUSSALEH
POWDER METALLURGY Dr. M. Sayuti, ST.,M.Sc JURUSAN TEKNIK INDUSTRI FAKULTAS TEKNIK UNIVERSITAS MALIKUSSALEH 1- INTRODUCTION Powder metallurgy is the name given to the process by which fine powdered materials
More informationExperimental Investigation on Ceramic Surface Coatings on Aluminum using Detonation Gun
International Journal of Current Engineering and Technology E-ISSN 2277 4106, P-ISSN 2347 5161 2017 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijcet Research Article Experimental
More informationInvestigation of anode materials for lithium-ion batteries
University of Wollongong Thesis Collections University of Wollongong Thesis Collection University of Wollongong Year 2006 Investigation of anode materials for lithium-ion batteries Ling Yuan University
More informationWHAT TO DO? ELECTROPLATING OR METAL SPRAYING?
WHAT TO DO? ELECTROPLATING OR METAL SPRAYING? S. de Vries, J.W. Rauhorst, B. Plasse & F. Kemeling The first step to improve and control the quality of a metal product starts at the desk of the designer.
More informationELECTRICAL CONTACTS BY POWDER METALLURGY. Submitted by Priyanshu Jain (12518)
ELECTRICAL CONTACTS BY POWDER METALLURGY Submitted by Priyanshu Jain (12518) 1 OUTLINE Electrical contacts: Introduction Desirable Properties of contact material Contact material selection Manufacturing
More informationChapter 3: Powders Production and Characterization
Chapter 3: Powders Production and Characterization Course Objective... To introduce selective powder production processes and characterization methods. This course will help you : To understand properties
More informationSTELLITE STELLITE ALLOYS
STELLITE ALLOYS Stellite Alloys With over 100 years of proven performance, Kennametal s Stellite alloys have become known as the worldwide material solution in wear, heat and corrosion applications. These
More informationAvailable online at Fatigue Fatigue in AISI 4340 steel thermal spray coating by HVOF for aeronautic application
Available online at www.sciencedirect.com Procedia Procedia Engineering Engineering 2 (2010) 00 (2009) 1617 1623 000 000 Procedia Engineering www.elsevier.com/locate/procedia Fatigue 2010 Fatigue in AISI
More informationHigh Speed Titanium Coatings by Supersonic Laser Deposition
High Speed Titanium Coatings by Supersonic Laser Deposition R. Lupoi, M. Sparkes, A. Cockburn and W. O Neill Institute for Manufacturing, Department of Engineering, University of Cambridge, 17 Charles
More informationTo explore the ability of the DVD technology to create dense, pinhole-free metal oxide
Chapter 4 Results 4.1 Strategy To explore the ability of the DVD technology to create dense, pinhole-free metal oxide layers and to develop an initial understanding of the relationship between various
More informationMetallurgy, Alloys, and Applications p. 1 Introduction and Overview p. 3 Major Groups of Copper and Copper Alloys p. 3 Properties of Importance p.
Preface p. vii Metallurgy, Alloys, and Applications p. 1 Introduction and Overview p. 3 Major Groups of Copper and Copper Alloys p. 3 Properties of Importance p. 3 Fabrication Characteristics p. 5 Alloy
More informationpublished at the ISPC 14, Prague, CZ, August 2 nd - 6 th 1999
published at the ISPC 14, Prague, CZ, August 2 nd - 6 th 1999 In-situ characterization of plasma chemical reactions during the deposition of Si-C (-N) coatings in a D.C. plasma jet by means of emission
More informationJoint Technology Initiatives Collaborative Project (FCH) FCH-JU WP4 - Development of lab-scale cell components
Joint Technology Initiatives Collaborative Project (FCH) FCH-JU-2010-1 WP4 - Development of lab-scale cell components DELIVERABLE 4.3- Prepared by: HOGANAS Document control data Document ref. : METPROCELL-WP4-
More informationIncrease powder packing density. Spherical particles provide denser packing of powders, increasing overall bulk tap density.
Plasma power can make better powders It may be a truism to say that round powders pack better, but spheroidisation of powder particles is one of the successful commercial applications of induction plasma
More informationApplications through Partnership and Innovation
PYROGENESIS S.A. Advanced Materials Thermal Spray Technologies Technological Park Lavrion Technological Park of Lavrio THERMAL SPRAY INDUSTRIAL APPLICATIONS Applications through Partnership and Innovation
More informationCoatings and potting compounds for LED applications capabilities, limitations and trouble shooting
Coatings and potting compounds for LED applications capabilities, limitations and trouble shooting Content Some theory on conformal coatings and potting compounds Conformal coatings for lighting applications
More information3 TIG welding. 3.1 A description of the method. 3.2 Equipment
3 TIG welding 3.1 A description of the method TIG welding (also called Gas Tungsten Arc Welding, GTAW) involves striking an arc between a non-consumable tungsten electrode and the workpiece. The weld pool
More informationLecture 16 Gas Tungsten Arc welding III & Plasma Arc Welding Keyword: 16.1 Selection of pulse parameters
Lecture 16 Gas Tungsten Arc welding III & Plasma Arc Welding This chapter presents the influence of process parameters of pulse TIG welding process on the development of sound weld joint. Further, the
More informationCorrosion Repair of Magnesium Rotorcraft Components
Corrosion Repair of Magnesium Rotorcraft Components Phillip F. Leyman US Army Research Laboratory Weapons & Materials Research Directorate Presented at Aging Aircraft Conference April 20 2007 - Program
More informationTHE TECHNOLOGY AND PROPERTIES OF COMBINED SPRAYED BARRIER COATINGS
PROFESSIONAL STUDIES: THE TECHNOLOGY AND PROPERTIES OF COMBINED SPRAYED BARRIER COATINGS Toomas Pihl Tallinn University of Applied Sciences Estonia Valdek Mikli Tallinn University of Technology Estonia
More informationFundamental Characteristics of a Microwave Discharge Type Plasma Source Working under Atmosphere Pressure
Fundamental Characteristics of a Microwave Discharge Type Plasma Source Working under Atmosphere Pressure KOBAYASHI Akira*, TAKAO Yoshiyuki**, KOMURASAKI Kimiya*** Abstract The microwave discharge plasma
More informationHBLED packaging is becoming one of the new, high
Ag plating in HBLED packaging improves reflectivity and lowers costs JONATHAN HARRIS, President, CMC Laboratories, Inc., Tempe, AZ Various types of Ag plating technology along with the advantages and limitations
More informationSTUDIES ON THE APPLICABILITY OF THE HIGH VELOCITY THERMAL SPRAY USED IN THE AUTOMOTIVE INDUSTRY
STUDIES ON THE APPLICABILITY OF THE HIGH VELOCITY THERMAL SPRAY USED IN THE AUTOMOTIVE INDUSTRY D. PETRE 1 R. IOVANAŞ 1 A. PASCU 1 Abstract: The thermal spray is a domain connected to the welding process
More informationMetallization of MID Dec 2 010
Metallization of MID Dec 2010 Agenda Introduction to Dow Electronic Materials MID Applications & Advantages Dow MID Metallization Processes Plating Equipment Summary Dow Business Structure Where Dow Electronic
More informationFrom Surface To Cell: Understanding the Lithium Ion Battery. The world leader in serving science
From Surface To Cell: Understanding the Lithium Ion Battery 1 The world leader in serving science Content Discharge Detail the Li-ion Battery industry drivers & trends Our position in industry and our
More informationKasetsart University. INDT0204: Welding. Types of Welding
Types of Welding Fusion Welding (Chap. 27) Oxyfuel Gas Welding Arc-Welding Processes Consumable-Electrode Nonconsumable-Electrode Others Electron-Beam Welding Laser-Beam Welding Solid State Welding (Chap.
More informationTRADE OF VEHICLE BODY REPAIR
TRADE OF VEHICLE BODY REPAIR PHASE 2 Module 1 UNIT: 7 Galvanised Materials Produced by In cooperation with subject matter expert: Maurice Stack Some material courtesy of CDX Global and FENC Further Education
More informationADVANCED TECHNIQUES FOR SURFACE ENGINEERING OF INDUSTRIAL MATERIALS
ADVANCED TECHNIQUES FOR SURFACE ENGINEERING OF INDUSTRIAL MATERIALS S. K. Mishra National Metallurgical Laboratory Jamshedpur ABSTRACT This paper deals with the various advanced surface modification techniques.
More informationTHERMAL SPRAYING AND PTA CLADDING
PRODUCTS FOR THERMAL SPRAYING AND PTA CLADDING Corodur Fülldraht GmbH Gießerallee 37 D - 47877 Willich Phone: +49 (0) 2154 8879-0 Fax: +49 (0) 2154 8879-79 Internet: www.corodur.de E-Mail: info@corodur.de
More informationThe Role Of Electroplates In Contact Reliability
The Role Of Electroplates In Contact Reliability W.H. Abbott Battelle-Columbus Abbott@battelle.org 10/24/02 1 Overview Electroplating Is A Process; i.e. It Should Not Be Viewed As Simply A Material The
More informationCladding and Additive Layer Manufacturing with a laser supported arc process
Cladding and Additive Layer Manufacturing with a laser supported arc process A. Barroi, J. Hermsdorf, R. Kling Laser Zentrum Hannover e.v., Hannover, 30419, Germany Abstract This paper describes the potential
More informationStudy on HVOF spraying replacement of EHC repairing technique
Study on HVOF spraying replacement of EHC repairing technique SU Xin-Yong Qin Dao Qianjin Naval Yard Qingdao, China 266001 e-mail: suxinyong888@163.com. Abstract The EHC processing can be prepared wear
More informationPLATING ON PLASTICS POP
POP A WIDE RANGE OF APPLICATIONS PLASTICS FOR METALLIZATION PP 3% PA 3% others 2% ABS/PC 42% ABS 50% STAGES FOR METALLIZATION OF PLASTIC PRETREATMENT : CLEANING This stage improves the wettability of the
More information