Section 3: Introduction. Dipped Radial Capacitors. Foreword SOLID TANTALUM RESIN DIPPED SERIES TAP

Size: px

Start display at page:

Download "Section 3: Introduction. Dipped Radial Capacitors. Foreword SOLID TANTALUM RESIN DIPPED SERIES TAP"

Derick West
5 years ago
Views:

1 ection 3: Introuction Forewor AVX offers a broa line of soli Tantalum capacitors in a wie range of sizes, styles, an ratings to meet any esign nees. This catalog combines into one source AVX s leae tantalum capacitor information from its worlwie tantalum operations. The TAP is rate for use from -55 C to 85 C at rate voltage an up to 125 C with voltage erating. There are three preferre wire forms to choose from which are available on tape an reel, an in bulk for han insertion. Four sizes of mole axials, the TAR series, are also available. The TAR is fully marke an available on tape an reel for high spee insertion. The TAA is a hermetically seale series also with four case sizes available. AVX has a complete tantalum applications service available for use by all our customers. With the capability to prototype an mass prouce soli tantalum capacitors in special configurations, almost any esign nee can be fulfille. An if the customer requirements are outsie our stanar testing, AVX will work with you to efine an implement a test or screening plan. AVX is etermine to become the worl leaer in tantalum capacitor technology an has mae, an is continuing to make, significant investments in equipment an research to reach that en. We believe that the investment has pai off with the evices shown on the following pages. ippe Raial Capacitors OI TANTAUM REIN IPPE ERIE TAP The TAP resin ippe series of miniature tantalum capacitors is available for iniviual nees in both commercial an professional applications. From computers to automotive to inustrial, AVX has a ippe raial for almost any application. Tantalum Graphite Resin encapsulation Tantalum wire Terminal Wire ilver oler Manganese ioxie Tantalum pentoxie 86

2 ippe Raial Capacitors Wire Form Outline OI TANTAUM REIN IPPE TAP Preferre Wire Forms Figure 1 Figure 2 Figure (0.16) max 2.0(0.08) max 1 2 (0.079) Wire Form C min Wire Form B Wire Form 2 (0.079) min Non-Preferre Wire Forms (Not recommene for new esigns) Figure 4 Figure 5 Figure (0.15) max 1 max (3.0) (2) min ( ) Wire Form F Wire Form Wire Form G IMENION Wire Form Figure Case ize (see note 1) Preferre Wire Forms C Figure 1 A - R* B Figure 2 A - J* 16.0± ± ±0.05 (0.630±0.160) (0.200±0.040) (0.020±0.002) CC CRW CR millimeters (inches) Packaging uffixes Available* Tape/Reel Tape/Ammo 16.0± ± ±0.05 BRW Tape/Reel (0.630±0.160) (0.200±0.040) (0.020±0.002) BR Tape/Ammo Figure 3 A - J* 16.0± ± ±0.05 (0.630±0.160) (0.100±0.020) (0.020±0.002) Non-Preferre Wire Forms (Not recommene for new esigns) 3.90± ± ±0.05 F Figure 4 A - R (0.155±0.030) (0.200±0.020) (0.020±0.002) Figure 5 A - * 16.0± ± ±0.05 (0.630±0.160) (0.100±0.020) (0.020±0.002) 16.0± ± ±0.05 G Figure 6 A - J (0.630±0.160) (0.125±0.020) (0.020±0.002) imilar to 16.0± ± ±0.05 A - R Figure 1 (0.630±0.160) (0.250±0.040) (0.020±0.002) Notes: (1) ea lengths can be supplie to tolerances other than those above an shoul be specifie in the orering information. (2) For,, an 1 imensions, refer to iniviual prouct on following pages. * For case size availability in tape an reel, please refer to pages C RW R FC C TW T GB B Tape/Reel Tape/Ammo Tape/Reel Tape/Ammo 87

ippe Raial Capacitors TAP eries OI TANTAUM REIN IPPE CAPACITOR TAP is a professional grae evice manufacture with a flame retarant coating an featuring low leakage current an impeance, very small

3 ippe Raial Capacitors TAP eries OI TANTAUM REIN IPPE CAPACITOR TAP is a professional grae evice manufacture with a flame retarant coating an featuring low leakage current an impeance, very small physical sizes an exceptional temperature stability. It is esigne an conitione to operate to 125 C (see page 123 for voltage erating above 85 C) an is available loose or tape an reele for auto insertion. The 15 case sizes with wie capacitance an working voltage ranges means the TAP can accommoate almost any application. MAXIMUM CAE IMENION: millimeters (inches) Wire C, F, G, B,, Case * 1 A 8.50 (0.330) 7.00 (0.280) 4.50 (0.180) B 9.00 (0.350) 7.50 (0.300) 4.50 (0.180) C 10.0 (0.390) 8.50 (0.330) 5.00 (0.200) 10.5 (0.410) 9.00 (0.350) 5.00 (0.200) E 10.5 (0.410) 9.00 (0.350) 5.50 (0.220) F 11.5 (0.450) 10.0 (0.390) 6.00 (0.240) G 11.5 (0.450) 10.0 (0.390) 6.50 (0.260) 12.0 (0.470) 10.5 (0.410) 7.00 (0.280) J 13.0 (0.510) 11.5 (0.450) 8.00 (0.310) K 14.0 (0.550) 12.5 (0.490) 8.50 (0.330) 14.0 (0.550) 12.5 (0.490) 9.00 (0.350) M 14.5 (0.570) 13.0 (0.510) 9.00 (0.350) N 16.0 (0.630) 9.00 (0.350) P 17.0 (0.670) 10.0 (0.390) R 18.5 (0.730) 10.0 (0.390) OW TO ORER TAP 475 M 035 C Type Capacitance Coe pf coe: 1st two igits represent significant figures, 3r igit represents multiplier (number of zeros to follow) Capacitance Tolerance K = ±10% M = ±20% (For J = ±5% tolerance, please consult factory) Rate C Voltage uffix inicating wire form an packaging (see page 87) 88

4 ippe Raial Capacitors TAP eries TECNICA PECIFICATION Technical ata: All technical ata relate to an ambient temperature of 25 C Capacitance Range: 0.1µF to 330µF Capacitance Tolerance: ±20%; ±10% (±5% consult your AVX representative for etails) Rate Voltage C (V R ) 85 C: Category Voltage (V C ) 125 C: urge Voltage (V ) 85 C: C: Temperature Range: -55 C to 125 C Environmental Classification: 55/125/56 (IEC 68-2) issipation Factor: 0.04 for C R µF 0.06 for C R µF 0.08 for C R 10-68µF 0.10 for C R µF Reliability: 1% per 1000 hrs. at 85 C with 0.1Ω/V series impeance, 60% confience level. Qualification: CECC Capacitance Range (letter enotes case size) Capacitance Rate voltage C (V R ) µf Coe 6.3V 10V 16V 20V 25V 35V 50V A A A A A A A A A A A B A A A C A A A A A A A A B E A A A B B C F A A B C C E G A B C F B C E E F J C E F F K E F K E F F J J M F G J K M N G N N K N N K N N M P R P R Values outsie this stanar range may be available on request. AVX reserves the right to supply capacitors to a higher voltage rating, in the same case size, than that orere. MARKING Polarity, capacitance, rate C voltage, an an "A" (AVX logo) are laser marke on the capacitor boy which is mae of flame retarant gol epoxy resin with a limiting oxygen inex in excess of 30 (ATM--2863). Polarity Capacitance Voltage AVX logo A Tolerance coe: ±20% = tanar (no marking) 10µ ±10% = K on reverse sie of unit ±5% = J on reverse sie of unit 16 89

5 ippe Raial Capacitors TAP eries RATING AN PART NUMBER REFERENCE AVX Case Capacitance C F ER Part No. ize µf (µa) % Max. (Ω) Max. 100 kz C (4 125 C) TAP 335( * )006 A TAP 475( * )006 A TAP 685( * )006 A TAP 106( * )006 B TAP 156( * )006 C TAP 226( * ) TAP 336( * )006 E TAP 476( * )006 F TAP 686( * )006 G TAP 107( * ) TAP 157( * )006 K TAP 227( * )006 M TAP 337( * )006 P C ( C) TAP 225( * )010 A TAP 335( * )010 A TAP 475( * )010 A TAP 685( * )010 B TAP 106( * )010 C TAP 156( * ) TAP 226( * )010 E TAP 336( * )010 F TAP 476( * )010 G TAP 686( * ) TAP 107( * )010 K TAP 157( * )010 N TAP 227( * )010 P TAP 337( * )010 R C ( C) TAP 155( * )016 A TAP 225( * )016 A TAP 335( * )016 A TAP 475( * )016 B TAP 685( * )016 C TAP 106( * ) TAP 156( * )016 E TAP 226( * )016 F TAP 336( * )016 F TAP 476( * )016 J TAP 686( * ) TAP 107( * )016 N TAP 157( * )016 N TAP 227( * )016 R C ( C) TAP 105( * )020 A TAP 155( * )020 A TAP 225( * )020 A TAP 335( * )020 B TAP 475( * )020 C TAP 685( * ) TAP 106( * )020 E TAP 156( * )020 F AVX Case Capacitance C F ER Part No. ize µf (µa) % Max. (Ω) Max. 100 kz C ( C) continue TAP 336( * )020 J TAP 476( * )020 K TAP 686( * )020 N TAP 107( * )020 N C ( C) TAP 105( * )025 A TAP 155( * )025 A TAP 225( * )025 A TAP 335( * )025 B TAP 475( * )025 C TAP 685( * ) TAP 106( * )025 E TAP 156( * )025 F TAP 226( * ) TAP 336( * )025 J TAP 476( * )025 M TAP 686( * )025 N C ( C) TAP 104( * )035 A TAP 154( * )035 A TAP 224( * )035 A TAP 334( * )035 A TAP 474( * )035 A TAP 684( * )035 A TAP 105( * )035 A TAP 155( * )035 A TAP 225( * )035 B TAP 335( * )035 C TAP 475( * )035 E TAP 685( * )035 F TAP 106( * )035 F TAP 156( * ) TAP 226( * )035 K TAP 336( * )035 M TAP 476( * )035 N C ( C) TAP 104( * )050 A TAP 154( * )050 A TAP 224( * )050 A TAP 334( * )050 A TAP 474( * )050 A TAP 684( * )050 B TAP 105( * )050 C TAP 155( * ) TAP 225( * )050 E TAP 335( * )050 F TAP 475( * )050 G TAP 685( * ) TAP 106( * )050 J TAP 156( * )050 K TAP 226( * ) TAP 226( * ) (*) Insert capacitance tolerance coe; M for ±20%, K for ±10% an J for ±5% NOTE: Voltage ratings are minimum values. AVX reserves the right to supply higher voltage ratings in the same case size. 90

6 ippe Raial Capacitors Tape an Reel Packaging OI TANTAUM REIN IPPE TAP TAPE AN REE PACKAGING FOR AUTOMATIC COMPONENT INERTION TAP types are all offere on raial tape, in reel or ammo pack format for use on high spee raial automatic insertion equipment, or preforming machines. TAP available in three formats. ee page 92 for imensions. The tape format is compatible with EIA 468A stanar for component taping set out by major manufacturers of raial automatic insertion equipment. P2 P h 3 1 W2 W1 W B wires for normal automatic insertion on 5mm pitch. BRW suffix for reel BR suffix for ammo pack Available in case sizes A - J P1 P T P2 P h C wires for preforming. 3 1 W2 W1 W CRW suffix for reel CR suffix for ammo pack Available in case sizes A - R P1 P T P2 P h 3 an wire for special applications, automatic insertion on 2.5mm pitch. 2 1 P1 P W2 W1 W T wire RW, TW suffix for reel R, T suffix for ammo pack Available in case sizes A - J 91

7 ippe Raial Capacitors Tape an Reel Packaging OI TANTAUM REIN IPPE TAP IMENION: millimeters (inches) escription Coe imension Fee hole pitch P 12.7 ± 0.30 (0.500 ± 0.010) ole center to lea P ± 0.70 (0.150 ± 0.030) to be measure at bottom of clench 5.05 ± 1.00 (0.200 ± 0.040) for wire ole center to component center P ± 0.40 (0.250 ± 0.020) Change in pitch p ± 1.00 (± 0.040) ea iameter 0.50 ± 0.05 (0.020 ± 0.003) ea spacing ee wire form table Component alignment h 0 ± 2.00 (0 ± 0.080) Fee hole iameter 4.00 ± 0.20 (0.150 ± 0.008) Tape with W ( ) ) ol own tape with W (0.240) min. ol own tape position W (0.040) max. ea wire clench height 16.0 ± 0.50 (0.630 ± 0.020) 19.0 ± 1.00 (0.750 ± 0.040) on request ole position ± 0.50 (0.350 ± 0.020) Base of component height (0.700) min. ( wire only) Component height (1.300) max. ength of snippe lea 11.0 (0.430) max. Total tape thickness T 0.70 ± 0.20 (0.030 ± 0.001) Carrying car 0.50 ± 0.10 (0.020 ± 0.005) REE CONFIGURATION AN IMENION: millimeters (inches) iameter 30 (1.18) max. 45 (1.77) max. 40 (1.57) min. 80 (3.15) 360 (14.17) max. carboar with plastic hub. 53 (2.09) max. Manufacture from carboar with plastic hub. li t t i oling tape outsie. Positive terminal leaing. PACKAGING QUANTITIE For Reels For Ammo pack For bulk proucts tyle Case size No. of pieces tyle Case size No. of pieces tyle Case size No. of pieces A 1500 B, C, 1250 TAP E, F 1000 G,, J 750 K,, M, N, P, R 500 A, B, C, 3000 TAP E, F, G 2500, J 2000 K,, M, N, P, R 1000 A to 1000 TAP J to 500 M to R 100 AMMO PACK IMENION millimeters (inches) max. eight 360 (14.17), with 360 (14.17), thickness 60 (2.36) GENERA NOTE Resin ippe tantalum capacitors are only available tape in the range of case sizes an in the moular quantities by case size as inicate. Packaging quantities on tape may vary by ±1%. 92

TANTALUM DIPPED / RADIAL POLAR

TANTALUM DIPPED / RADIAL POLAR TANTALUM IPPE / RAIAL POLAR PERFORMANCE CARACTERISTICS CAPACITANCE/VOLTAGE RANGE: T35X/T39X: 0.1-680µF, 3-50 s. T36X: 0.1-330µF, 6-50 s. CAPACITANCE TOLERANCE: Available in standard EIA nominal values