ISO 9001:2000 expires globally after November 12, 2010
|
|
- Isabel Dixon
- 5 years ago
- Views:
Transcription
1 February 18, 2010 Attention NSF-ISR ISO 9001:2000 certified customers, This is a reminder that ISO 9001:2000 expires globally after November 12, Consistent with the initial transition arrangements outlined last year, clients no longer have the option of being audited to ISO 9001:2000 and all ISO 9001 audits will be conducted against the 2008 version. This includes audits conducted to AS9100, AS9110 and AS9120 and clients with TS certification who chose to maintain a seperate ISO 9001 certificate. Additionally, all ISO 9001:2000 certificates will be cancelled in our system after this date. Auditors should mention this at the opening meeting and closing meeting where appropriate. Any clients who are ISO 9001:2000 certified and are not due for another audit within a reasonable timeframe before the deadline will need to have either an early audit (surveillance or reassessment, depending on which audit is next in the cycle) or a verification audit well in advance. Please note that there will be no extensions granted for ISO 9001:2000 certificates by ANAB. If the organization fails to make the deadline, then they will lose their certification. If you have any questions/concerns, please feel free to contact: Che Masters Technical Specialist NSF International Strategic Registrations 789 N. Dixboro Rd. Ann Arbor, MI P: (734) F: (734) E: cmasters@nsf-isr.org
2 December 12, 2008 To: All QMS Auditors, Staff and ISO 9001:2000 customers Subject: ISO 9001:2008 Transition Update ISO 9001:2008 was issued on November 13, The International Organization for Standardization (ISO) and the International Accreditation Forum (IAF), the body that oversees registrars worldwide, have agreed an 24-month transition period between ISO 9001:2000 and ISO 9001:2008. Therefore after November 12, 2009, all accredited certifications issued (new certifications or re-certifications) must be to ISO 9001:2008 and all accredited ISO 9001:2000 certificates will no longer be valid after November 12, Below are frequently asked questions regarding NSF-ISR s policies related to the transition: Q: When will we be required to have ISO 9001:2008 audits? What about our current ISO 9001:2000 certificate? A: All audits after November 12, 2009 will be conducted to the new standard. No ISO 9001:2008 certificates can be issued until NSF-ISR completes an audit to ISO 9001:2008. The auditor will specify on the audit report and at the opening meeting that the audit is an upgrade to ISO 9001:2008. If you choose not to upgrade during a surveillance audit or respond with acceptable corrective action plans for transitional findings, then your ISO 9001:2000 certificate is valid until November 13, If you choose not to upgrade during a recertification audit, then the new certificate will be issued to the ISO 9001:2000 standard and expires on November 13, 2010*. If you upgrade during a surveillance audit then a new certificate is issued to the ISO 9001:2008 standard with the expiration date remaining the same as your previous ISO 9001:2000 certificate. If you upgrade during a recertification audit then the ISO 9001:2008 certificate will be issued for the normal three-year period. Clients may also conduct an early recertification audit in lieu of a surveillance audit in order to receive an ISO 9001:2008 certificate valid for three years. Q: Will additional time be added to our audits? A: NSF-ISR recommends that you have at least a half day documentation review in preparation for your upgrade audit. Please contact your sales person for details on how this can be achieved. Q: How will nonconformities effect our transition? A: Transitional findings are defined as those associated with the language changes incorporated into the ISO 9001:2008 standard. All findings to the ISO 9001:2008 standard will be labeled Transitional. Transitional findings may be either major or minor. You may submit corrective actions for transitional findings or you may choose to ignore them and retain your ISO 9001:2000 certification until November 12, 2010*; Failure to address minor transitional findings with an acceptable corrective action plan will prevent an upgrade to ISO 9001:2008. Minor transitional findings may be closed at the next surveillance. In order to upgrade to ISO 9001:2008 all major findings must be closed and all minor transitional findings must have an acceptable corrective action plan. All transitional findings must be addressed by November 13, You can be recommended for registration to the ISO 9001:2008 standard if there are no major findings. If you have any questions or need clarification, please contact: Che Masters (734) cmasters@nsf-isr.org or Garry Puglio (814) puglio@nsf-isr.org *NOTE: After November 12, 2009, all accredited certifications issued, new or renewed, must be to ISO 9001:2008. Please bear this in mind regarding recertification audits.
3 The following is a table that NSF-ISR has prepared to assist our customers in understanding some of the changes made to the ISO 9001 standard. These are changes that NSF-ISR believes are of the most significant and not sanctioned interpretations, nor is this a comprehensive guide to all the changes made to the ISO 9001 standard. Not Auditable 0.1 General Added additional language to emphasize that statutory and regulatory requirements are a concern as it relates to product and included various factors that influence the design and implementation of a quality management system. 0.2 Process approach Added additional language to emphasize that a process approach also needs to take into account the desired outcomes (i.e. objectives) of a process. 0.4 Compatibility with other management systems standards 1.1 General 1.2 Application 2. Normative Reference 3 Terms and definitions Emphasis added that consideration was given to ISO 14001:2004 to ensure that the standards are compatible Statutory was added in certain paragraphs to ensure the user is aware that these requirements must be taken into consideration. Additional notes were added to explain that where the word product appears, it refers to every stage of its existence, from raw material received to the final product being shipped to the customer. Reference to ISO 9000 (vocabulary and concepts) was updated to refer to the current revision (i.e. ISO 9000:2005). The supplier/organization/customer model was removed. These relationships, in reality, are not always linear.
4 4.1 In 4.1 a, identify was replaced with determine to emphasize that an organization must give careful consideration to what processes are needed in order to fulfill requirements. 4.1e, where applicable was added to qualify the requirement to measure processes, as not all processes requires discrete, finite measurement (e.g. PPMs, ontime delivery, etc). Outsource processes: Control does not have be identified, rather the type and extent of controls must be defined within the quality management system. A link is drawn to 7.4 in the additional note to illustrate that the supplier approval, evaluation, re-evaluation process is typically where evidence of the control of outsourced processes is demonstrated. A second note was added to define outsourced process References to records and documents were consolidated. Also, the organization can require records not specified in this international standard are created and maintained Clarification is given to the requirement for external documents. Only those needed for the planning and operation of the QMS need to be controlled as determined by the organization. This could exclude documents related to occupational health and safety since ISO 9001 contains requirements only concerned with product (see 0.1) Despite record control procedures imposed upon the organization by external sources, the organization is still responsible for documenting record control procedures The Management Representative must be from the organization s management. This would exclude consultants and other individuals external to the organization (e.g. A management representative from the corporate entity) who operate externally to the organization. The purpose is to ensure that this individual entrusted with the responsibilities of championing the quality management system is not out of touch with the organization.
5 The Auditable Requirements The boundaries of competence only extend to individuals who impact product conformity to defined requirements. However this does not just include those who are directly involved in production. For example as the decision made by management affect product conformity, they must be competent as well Conformity to requirements was added to draw boundaries on what is meant by product quality. The term quality is too subjective. If said personnel have not yet attainted the competence needed to perform their job, then the organization must provide training or some other remedy to ensure that competence is achieved. The organization must also have a mechanism to ensure that personnel have been evaluated based on how well they demonstrate their knowledge and skill (i.e. competence). It is not enough to merely provide training or consider an individual s experience. The organization must prove to itself that this person can, in fact, perform. 6.3 Infrastructure also includes databases and information technology. 6.4 Emphasis is added in a note to highlight that the concept of work environment only extends to product quality. 7.1 c Measurement is added Post-delivery activity is clarified in a note with examples A note emphasizes that design verification, validation, and review are different from one another and serve different purposes; Design review is for the organization to evaluate if the design can meet requirements and if any changes need to be made. Design verification is where the organization has ensured that requirements have been met (e.g. is the widget blue and is it hexagonal?). Design validation is where the organization proves that the design can perform as required. However, the records of these activities do not have to be as distinct.
6 The Auditable Requirements Production and service provisions also extend to how product is preserved, handled, etc, to ensure product conformity. See Design outputs should include requirements related to preservation. See Product status must be identified throughout product realization and not just the final product. See Property can include personal data (e.g. social security numbers). 7.6 The definition of monitoring and measuring devices has been clarified to include equipment and devices that are purposed for monitoring and measuring, regardless of their original, intended purpose. An additional note regarding software was added Requirements for the organization to maintain records of internal audits have been clarified. Actions deemed necessary and taken by management to address nonconformities identified during the internal audit process must follow the requirements of the corrective action process (i.e. root cause, correction and corrective action). Reference to auditing guidance document was updated (i.e. ISO 19011).
7 8.2.3 Wording was changed to emphasize that correction and corrective actions are not only to be taken to preserve the conformity of the product, but also the quality management system. For example, internal rejection/scrap rates show evidence that the organization is preserving product conformity and is taking intermediate action to prevent bad product from being shipped to their customers; however, it could also be a sign that the organization is not efficient since the higher rejection/scrap rates are undesirable. A note was added to clarify the meaning of suitable methods related to planning monitoring and measurement processes. Suitability should be determined based on risk and the impact that nonconformity would have on the product or process Product can be released to other internal processes despite planned arrangements not being satisfactorily completed as long as it conforms prior to release to the customer. This relaxes requirements on intermediate inspection results and records. 8.4 Links to other clauses in the standard were added to further understanding of the intent of the requirements Nonconformity can have multiple causes ( cause ; i.e. a singular reason, was used in the 2000 version); therefore, the organization must consider this when conducting root cause analysis. Also, it is not enough to simply review corrective action and insure that procedures were changed, personnel have been re-trained, and that processes were amended. The organization must review whether or not the action(s) taken were effective; i.e. did they successfully eliminate the nonconforming condition? Similar to the new emphasis on the effectiveness of corrective action, the organization must also whether or not the preventive action(s) taken were effective in eliminating the risk of nonconformity.
ISO 9001:2015 TRANSITION INFORMATION
ISO 9001:2015 TRANSITION INFORMATION ISO 9001:2015 Transition It Doesn t Need to be Difficult Whether your organization is transitioning from ISO 9001:2008 to the new ISO 9001:2015, or implementing an
More informationIMPLEMENTATION OF ISO 9001:2008 PARTICULAR ASPECTS
RINA IMPLEMENTATION OF ISO 9001:2008 PARTICULAR ASPECTS 1 SCOPE AND PURPOSE This document defines the RINA criteria for the verification of implementation of ISO 9001:2008 in relation to some particular
More informationAESOP 15604; ISSUE 2; STATUS PENDING APPROVAL; AUTHORITY CARL BLAZIK This document is the property of NSF ISR. Page 1 of 9
This document is the property of NSF ISR. Page 1 of 9 ISO 9001 Quality Management Systems registration provides a set of uniform requirements for a quality management system. A number of quality management
More informationCode of Practice for the TL 9000 Certification Process Release 8.0
Code of Practice for the TL 9000 Certification Process Release 8.0 This document is a product of the Oversight Work Group of the TIA Business Performance Community ( BPC ). It is subject to change by the
More informationP. 1. Identify the Differences between ISO9001:2000 與 ISO9001:2008 ISO9001:2008 ISO9001:2000 版本的異同. 5 January 2009 ISO 9000 SERIES
Identify the Differences between ISO9001:2000 and ISO 9001:2008 審視 ISO9001:2000 與 ISO9001:2008 版本的異同 ISO 9000 SERIES ISO 19011 ISO9000 5 January 2009 ISO9001 ISO9004 2 ISO 9000 SERIES ISO 9001 ISO 9000
More informationBSA International Certification Co. Private Limited.
BSA International Certification Co. Private Limited. TRANSITION GUIDELINES FOR ISO 9001:2015 As everyone in the quality game is aware, the world now has a new version of ISO 9001. ISO Standards touch almost
More informationTransition Planning & Guidance
Transition Planning & Guidance ISO 9001:2015, Quality Management Systems P.O. Box: 116898, Dubai, United Arab Emirates. Tel: +971-4-3340045 / 3988529 Fax: +971-4-3340056/ 3980157 www.bascertification.com
More informationIATF 16949:2016 TRANSITION INFORMATION
IATF 16949:2016 TRANSITION INFORMATION ISO/TS 16949 Overview ISO/TS 16949 Technical Specification for Automotive Quality Management Systems, in conjunction with ISO 9001, defines the quality system requirements
More informationCorrelation Matrix & Change Summary
The correlation matrix compares the new requirements of ISO 9001:2015 to the requirements of ISO 9001:2008, and provides a summary of the changes. Correlation Matrix & Change Summary Introduction Correlation
More informationFrequently Asked Questions (FAQ) Log Revision: 20 Nov 2017
Applicable to 9104-001: Click here to go to the end of the log 1 2 9104-001 clause 5.2.c and clause 6.4. What does "continuing" mean in both of these clauses? Does "continuing" mean the person is currently
More informationTransition plan for Global Certification Pty Ltd ISO Bruce Smith
Transition plan for Global Certification Pty Ltd ISO 45001 Bruce Smith 1 New Standards in 2018 ISO 45001 was published in March 2018. Both JAS-ANZ and the IAF have a greed to a transition from OHSAS 18001:2007,
More informationExecutive Overview. Transitioning to ISO 9001:2015 Quality Management System. Biafore Associates Inc. Overview Objectives
Executive Transitioning to ISO 9001:2015 Quality Management System Biafore Associates Inc. This guideline is for training purposes only; Not ISO controlled Objectives The overview objectives are as follows:
More informationISO Client Program and Audit Manual
1 Great Western Registrar LLC ISO Client Program and Audit Manual Based on the requirements of ISO17021 and Associated ANAB Accreditation Rules 04/02/2018 Created and Approved by: Karey S. Yates, President/Owner
More informationISO 9001:2015 UPGRADE GUIDE. What to expect from the latest version of the Quality Management System Standard.
ISO 9001:2015 UPGRADE GUIDE What to expect from the latest version of the Quality Management System Standard Please Note: This guide is designed to take you through the key differences that exist between
More informationTransition Planning & Guidance
Transition Planning & Guidance ISO 14001:2015: Environmental Management Systems P.O. Box: 116898, Dubai, United Arab Emirates. Tel: +971-4-3340045 / 3988529 Fax: +971-4-3340056/ 3980157 www.bascertification.com
More informationIAQG Frequently Asked Questions (FAQs) 1 of 5
Frequently Asked s (s) Issue: June 2012 1 2 3 9104-1 Frequently Asked s () Log 9104-1 clause 5.2.c and clause 6.4. What does "continuing" mean in both of these clauses? Does "continuing" mean the person
More informationLMS Certification Ltd. ISO 9001 and ISO Transition
LMS Certification Ltd. ISO 9001 and ISO 14001 Transition Objective Section 1: presentation of LMS s interpretation of the high level structure of Annex SL; Section 2: To provide an overview of the changes
More informationLMS Certifications Pvt. Ltd. ISO 9001 and ISO Transition
LMS Certifications Pvt. Ltd. ISO 9001 and ISO 14001 Transition Objective Section 1: presentation of LMS s interpretation of the high level structure of Annex SL; Section 2: To provide an overview of the
More informationIATF - International Automotive Task Force IATF 16949:2016 Sanctioned Interpretations
:2016 Sanctioned Interpretations 1 st Edition was published in October 2016 and was effective 1 January 2017. The following Sanctioned Interpretations were determined and approved by the IATF. Unless otherwise
More informationINTEGRATING ISO 9000 METHODOLOGIES WITH PROJECT QUALITY MANAGEMENT
INTEGRATING ISO 9000 METHODOLOGIES WITH PROJECT QUALITY MANAGEMENT M a r ch 2015 OBJECTIVE ISO and Project Quality Management Process Are they different or the same? ISO 9000 QMS FAMILY ISO 9000:2005 Vocabulary
More informationHerndon, Virginia l
Transitioning to ISO 9001:2008 Richard J. Gillis Herndon, Virginia 703-318-8810 rgillis@qmssolutions.com l www.qmssolutions.com Topics Reason for the Amendment Scope of Amendment User Feedback on Amendment
More informationISO /TS 29001:2010 SYSTEMKARAN ADVISER & INFORMATION CENTER SYSTEM KARAN ADVISER & INFORMATION CENTER
SYSTEM KARAN ADVISER & INFORMATION CENTER PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES -- SECTOR-SPECIFIC QUALITY MANAGEMENT SYSTEMS -- REQUIREMENTS FOR PRODUCT AND SERVICE SUPPLY ORGANIZATIONS
More informationIATF - International Automotive Task Force IATF 16949:2016 Sanctioned Interpretations
:2016 Sanctioned Interpretations 1 st Edition was published in October 2016 and was effective 1 January 2017. The following Sanctioned Interpretations were determined and approved by the IATF. Unless otherwise
More informationMain changes to ISO 9001 from the 2000 version to the 2008 version
Introduction This document has been produced to outline the main changes to ISO 9001 from the 2000 version to the 2008 version, not all changes have been mentioned as most of them are typographical changes
More informationISO 9001:2000 The International Quality Management Business System
ISO 9001:2000 The International Quality Management Business System Table of Contents What is ISO 9000? Page 1 The Benefits of ISO 9001:2000 Page 1 Why an ISO 9001:2000 System? Page 2 Major Steps to Implementation
More informationAccredited Certification International Limited. Migration Q&A
Accredited Certification International Limited Migration Q&A The issue date of ISO 22000:2018 : June 2018 The transition period: 29 June 2018 29 June 2021 (3 years) The expiry date of ISO 22000:2005 Certificates:30
More informationISO 45001:2018. Overview of Changes
ISO 45001:2018 Overview of Changes Austin Matthews EHS Assistant Program Manager Welcome from PJR Headquarters: 755 W. Big Beaver Rd, Suite 1340 Troy, MI 48084 Phone: 1-800-800-7910 Introduction of speaker
More informationU.S. Technical Advisory Group to ISO/Technical Committee 207 Clarification of Intent of ISO 14001
Committee Correspondence US SUB-TAG to ISO/TC/207/SC1 on Environmental Management Systems Administrator: Jennifer Admussen, ASQ Chair: Susan L.K. Briggs When originating or replying, please send copy to
More informationQuality Manual ISO 9001:2008 ISO 9001:2015
Quality Manual ISO 9001:2008 ISO 9001:2015 SAE CIRCUITS, INC. 4820 63 rd Street Suite 100 Boulder, CO 80301 USA www.saecircuits.com Table of Contents 1. Company Information 3 2. QMS Scope and Exclusions
More informationFinal Document. 18 September 2014
IMDRFIMDSAP WG/N11FINAL:2014 International Medical Device Regulators Forum Final Document Title: MD SAP Assessment and Decision Process for the Recognition of an Auditing Organization Authoring Group:
More informationPART I REQUIREMENTS FOR ORGANIZATIONS THAT REQUIRE CERTIFICATION
FSSC 22000 Certification scheme for food safety systems in compliance with ISO 22000: 2005 and technical specifications for sector PRPs PART I REQUIREMENTS FOR ORGANIZATIONS THAT REQUIRE CERTIFICATION
More informationISO 9001:2015 Readiness Review
ISO 9001:2015 Readiness Review Company Name Address Certification No. Contact Name Job Title Telephone Email BSI is committed to ensuring a smooth assessment for all clients wishing to certify to ISO 9001:2015,
More informationISO9001:2008 SYSTEM KARAN ADVISER & INFORMATION CENTER QUALITY MANAGEMENT SYSTEM SYSTEM KARAN ADVISER & INFORMATION CENTER
SYSTEM KARAN ADVISER & INFORMATION CENTER QUALITY MANAGEMENT SYSTEM WWW.SYSTEMKARAN.COM 1 www.systemkaran.org Foreword... 5 Introduction... 6 0.1 General... 6 0.2 Process approach... 6 0.3 Relationship
More informationOverview of Draft API Standard 20M
Overview of Draft API Standard 20M Qualification of Suppliers of Machining Services for Use in the Petroleum and Natural Gas Industries API STANDARD 20M Slide 1 of 9 Overview Standard 20M provides methods
More informationISO 9001: Understanding the changes
ISO 9001: 2015 Understanding the changes Tel: 01952 288325 Email: info@interface-nrm.co.uk Why has ISO 9001 been Revised? ISO 9001, the world's leading Quality Management System has been revised to a new
More informationISO 9001:2015. Quality Management System. Manual
ISO 9001:2015 Quality Management System Manual Introduction Company has made the Strategic Business Decision to develop and implement an effective Quality Management Systems (QMS) across all areas of the
More informationSupplier Quality System Survey
Supplier Division Address Date: Quality Contact: Reports to: Title: Title: Phone Fax e-mail Plant size (ft 2 ): Union: Contract expires: Total Employment: Direct Labor: Shifts: QA employees: This report
More informationISO 9001:2015 For Manufacturers [Purpose & Value] Prepared by:
ISO 9001:2015 For Manufacturers [Purpose & Value] Prepared by: July 2017 Executive Summary At its core, ISO 9001 is intended to highlight the key business practices that are representative of successful,
More informationManagement System Manual International Compliance Group
Granting, refusing, maintaining, renewing, suspending, restoring or withdrawing certification. Page 1-1 Initial certification audit General - ICG s auditing work is conducted in two stages: Stage 1 and
More informationVINÇOTTE INTERNATIONAL
VINÇOTTE INTERNATIONAL IS PLEASED TO PROVIDE INFORMATION ABOUT THE SOON-TO-BE-ISSUED ISO 9001: STANDARD (NOVEMBER ) CONTENT: 1. DIFFERENCES BETWEEN ISO 9001: AND ISO 9001: EDITIONS 2. WHAT WILL HAPPEN
More informationWHAT TO EXPECT ON YOUR FIRST PJR AUDIT PRESENTED BY: SHANNON CRADDOCK, PROGRAMS & ACCREDITATIONS MANAGER
WHAT TO EXPECT ON YOUR FIRST PJR AUDIT PRESENTED BY: SHANNON CRADDOCK, PROGRAMS & ACCREDITATIONS MANAGER TODAY S PRESENTATION WILL COVER: Quotation Stage Prior to the Stage 1 Stage 1 audit Stage 2 audit
More informationQUALITY MANUAL ECO# REVISION DATE MGR QA A 2/25/2008 R.Clement J.Haislip B 6/17/2008 T.Finneran J.Haislip
UHV SPUTTERING INC Page 1 of 18 ECO REVISION HISTORY ECO# REVISION DATE MGR QA 1001 A 2/25/2008 R.Clement J.Haislip 1017 B 6/17/2008 T.Finneran J.Haislip 1071 C 1/13/2011 R.Clement J.Haislip 1078 D 5/15/2013
More informationISO : 2015 Upgrade Guide
ISO 14001 : 2015 Upgrade Guide Your detailed guide to upgrading an Environmental Management System Please Note: This guide is designed to take you through the key differences that exist between ISO 14001
More informationDocument: ISO/TC 176/SC 2/N 730. Our ref
Document: ISO/TC 176/SC 2/N 730 Our ref Secretariat of ISO/TC 176/SC 2 Date: 30 June 2005 To the Members of ISO/TC 176/SC 2 - Quality Management and Quality Assurance/ Quality Systems Design Specification
More informationFDIS ISO Overview of Changes
FDIS ISO 45001 Overview of Changes Austin Matthews EHS Assistant Program Manager Welcome from PJR Headquarters: 755 W. Big Beaver Rd, Suite 1340 Troy, MI 48084 Phone: 1-800-800-7910 Introduction of speaker
More informationAn EMS is a management tool to improve environmental performance by providing a systematic way of managing an organization s environmental affairs.
ISO 14001 The ISO 14001 standard provides organizations with the framework for an effective environmental management system (EMS) focused on achieving their environmental and economic goals and objectives.
More informationSUPPLIER QUALITY MANUAL
SUPPLIER QUALITY MANUAL 2 TABLE OF CONTENTS PAGE 1. INTRODUCTION 3 2. SCOPE 4 3. REFERENCE MATERIAL 4 4. SUPPLIER APPROVAL PROCESS 4-6 5. PRODUCT APPROVAL PROCESS 6 6. ON-GOING PRODUCTION 6-7 7. SUPPLIER
More informationCurrent Quality. Culture. Mini Paper IE 361
Current Quality Culture Mini Paper IE 361 I. Introduction ISO 9001 The International Organization for Standardization (ISO) was established in 1946 to promote the development of standardization and related
More informationQuality Commitment. Quality Management System Manual
Quality Commitment Quality Management System Manual This printed copy is uncontrolled Page 1 of 30 Thor Machining Quality Management System Manual Section 1 TABLE OF CONTENTS Page # 1 Introduction 5 2
More informationProcedure 14 Internal Audits
Procedure 14 Internal Audits Table of Contents 1 Introduction... 2 2 Audit Planning... 2 2.1 Head Office... 2 2.2 Critical Locations... 3 3 Conducting the Audit... 3 4 Non-conformances... 3 5 Client file
More informationQP 02 Audit and Certification Procedure
1. AUDIT PROGRAMME [9.1.1] The audit programme shall be conducted in stages within a 3-year certification cycle as follows; Initial audit: Two stage process Surveillance audit: Conducted in the first and
More informationFAQ 9101:2014 / 9101E
Rev. 4.0 20160927 Note 1: These FAQs correspond to 9101:2014 (9101E). Note 2: The item number corresponds with the order of submittal of the questions. This will support traceability. The questions and
More informationWHAT TO EXPECT DURING YOUR STAGE 1 AUDIT
WHAT TO EXPECT DURING YOUR STAGE 1 AUDIT Presented by: Joseph Krolikowski, Technical Director/ Executive Committee Member PLEASE NOTE: All participants have been muted. Please type your questions in the
More informationProcess Mapping and Process- Based Internal Audits
Process Mapping and Process- Based Internal Audits Presented by Shannon Craddock of Perry Johnson Registrars, Inc. February 5, 2014 Today s Topics Why Are We Doing This? Process Terminology Process Mapping
More informationLakshy Management Consultant Pvt. Ltd.
Lakshy Management Consultant Pvt. Ltd. Introduction ISO 9000 is a family of standards for quality management systems. ISO 9000 is maintained by ISO, the International Organization for Standardization and
More informationIAF Mandatory Document. for the Audit and Certification of a Management System Operated by a Multi-Site Organization (IAF MD 1:2018)
IAF Mandatory Document IAF Mandatory Document for the Audit and Certification of a Management System Operated by a Multi-Site Organization Issue 2 (IAF MD 1:2018) Issued: 29 January 2018 Application Date:
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 9001 Third edition 2000-12-15 Quality management systems Requirements Systèmes de management de la qualité Exigences Reference number ISO 9001:2000(E) ISO 2000 Contents Page
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 28003 First edition 2007-08-01 Security management systems for the supply chain Requirements for bodies providing audit and certification of supply chain security management
More informationHarmonization day 2015 FSSC audit reporting
Harmonization day 2015 FSSC 22000 audit reporting Today s topics 1. Basics audit reporting 2. Definition audit report 3. Audit report requirements 4. Conclusions 1. Basics audit reporting Starting point
More informationISO 9001: 2015 Quality Management System Certification. Awareness Training
ISO 9001: 2015 Quality Management System Certification Awareness Training ISO 9001: 2015 STRUCTURE The new standard is modeled around the ISO Directive Annex SL, a high level structure (HSL) based on the
More informationAS&D Client Program and Audit Manual
1 Great Western Registrar LLC AS&D Client Program and Audit Manual Based on ISO 17021, AS9104, Associated ANAB Accreditation Rules & ICOP Resolutions 04/02/2018 Created and Approved by: Karey S. Yates,
More informationISO 22000:2018 Transition Workshop (Auditors)
ISO 22000:2018 Transition Workshop (Auditors) What has changed? high level structure consistent with all MS standards risk approach different approach to understanding risk consistent with other MS standards
More informationQuality Safety Environment
Transition Planning Guidance for ISO 9001:2015 and ISO 14001:2015 Compliance Australia Certification Services Procedures - MAN 32 Version Number - V01 Release Date - 2 nd November 2015 Approved by - Managing
More informationSummary of changes between ISO 9001:2008 and ISO/CD 9001
Summary of changes between ISO 9001:2008 and ISO/CD 9001 Introduction This document is intended to summarise the proposed changes to ISO 9001:2008 as detailed in the Committee Draft (CD). It does not contain
More informationAS9101 Revision E Understanding the Changes
AS9101 Revision E Understanding the Changes Introduction Aviation, space and defense (ASD) organizations are highly regulated to ensure their products are safe and reliable, conform to statutory and regulatory
More informationBUSINESS ASSURANCE GUIDANCE FOR THE TRANSITIONING FROM ISO 9001:2008 TO ISO 9001:2015 SAFER, SMARTER, GREENER
BUSINESS ASSURANCE GUIDANCE FOR THE TRANSITIONING FROM ISO 9001:2008 TO ISO 9001:2015 SAFER, SMARTER, GREENER 2 ISO 9001 ABOUT THIS DOCUMENT The purpose of this document is to provide you with some useful
More informationISO 13485:2016 Mandatory documentation requirements & MyEasyISO
ts & Mandatory documents All below mandatory documents can be created using Documented information module of. An organization can use their own procedures but if required can provide these procedures to
More informationEPICOR, INCORPORATED QUALITY ASSURANCE MANUAL
EPICOR, INCORPORATED QUALITY ASSURANCE MANUAL Revision: 6 Date 05/18/09 EPICOR, INCORPORATED 1414 E. Linden Avenue P.O. Box 1608 Linden, NJ. 07036-0006 Tel. 1-908-925-0800 Fax 1-908-925-7795 Table of Contents:
More informationDANAK ACCREDITION REGULATION
to certification of Occupational Health and Safety Systems Page : 1/14 1. Application The accreditation regulation applies to all bodies which are or apply for accreditation to certification of Occupational
More informationWHAT TO EXPECT DURING YOUR STAGE 1 AUDIT
WHAT TO EXPECT DURING YOUR STAGE 1 AUDIT Presented by: Joseph Krolikowski, Technical Director/ Executive Committee Member PLEASE NOTE: All participants have been muted. Please type your questions in the
More informationSpecification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry
Addendum 1 June 2010 Effective Date: December 1, 2010 Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry ANSI/API SPECIFICATION Q1 EIGHTH EDITION, DECEMBER 2007
More informationPREPARING FOR THE CHANGE FROM ISO 22000:2005 TO ISO 22000:2018
PREPARING FOR THE CHANGE FROM ISO 22000:2005 TO ISO 22000:2018 BSCIC ADDING VALUE The adoption of a food safety management system (FSMS) is a strategic decision for an organization that can help to improve
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 9001 Third edition 2000-12-15 Quality management systems Requirements Systèmes de management de la qualité Exigences Reference number ISO 9001:2000(E) ISO 2000 PDF disclaimer
More informationReport No: SARA-CA Assessment Type: Re-Certification & Upgrade. Assessment Dates: 09/19/ /21/2016. Page 1
Lead Auditor: Thomas Morris Company Name: Kokusai Soko America, Inc. Address: 1521 Francisco Street, Unit A Torrance, CA 90501 Phone: 310-672-6176 Fax: 310-215-3724 Email: jerry@kskla.com Management Rep:
More informationHow FSC could improve the new Controlled Wood Standard 1
Position Paper: How FSC could improve the new Controlled Wood Standard 1 DRAFT 7 November 2016 Contents Certification requirements... 2 Update the standard so that it always fulfils the requirements of
More informationSection No.: PM 22 Issue No. 01 Issue Date Page 1 of 9 Rev. No. 03 Rev. Date: Procedure for Audit of a Multi-site Organization
Page 1 of 9 Rev. No. 03 Rev. Date: 01-10-2016 1.0. Purpose: To document, establish, implement and maintain the system for conducting the audit of a multi -site organization, in accordance with requirements
More informationOutsourcing and ISO 9001:2008
Outsourcing and ISO 9001:2008 Dan O Leary CBA, CQA, CQE, CRE, SSBB, CIRM President Ombu Enterprises, LLC Dan@OmbuEnterprises.com www.ombuenterprises.com 603-209-0600 1 Speaker Biography Dan O Leary Dan
More informationNOTICE. Re: Guidance Document GD211: Guidance on the Content of Quality Management System audit reports
June 8, 2011 NOTICE Our file number: 11-110913-528 Re: Quality Management System audit reports is pleased to announce the release of the guidance document GD211: Guidance on the Content of. A draft version
More informationISO/DIS9001:2008 VS ISO9001:2000. Speaker: Ir. Dr. Aaron TONG Date:
ISO/DIS9001:2008 VS ISO9001:2000 Speaker: Ir. Dr. Aaron TONG Date:2008-08-01 1 Outline Background Information of ISO/DIS 9001 : 2008 Main Changes of 2008 Edition What we should do? Q & A Section 2 Ir.
More informationISO Introduction and Background
ISO 13485 Introduction and Background After more than 10 years, the updated Quality Management standard with the revision of ISO 13485 for the medical device industry is here. The origins of ISO 13485
More informationQuality system implementation from a manufacturers viewpoint
OD005 IECEx Quality System Requirements for Manufacturers Quality system implementation from a manufacturers viewpoint Evans Massy Rockwell Automation October 3, 2005 31/10/2005 1 1515 1545 Manufacturer
More informationNew protocol FSSC version 4 What you need to know
New protocol FSSC 22000 version 4 What you need to know i The protocol version 4, what exactly? The FSSC 22000 certification is managed by a protocol published by the FSSC Foundation, which defines the
More informationASSESSMENT AND CERTIFICATION OF SHIP RECYCLING MANAGEMENT SYSTEMS
Page 1/10 1 SCOPE AND FIELD OF APPLICATION This document defines the methods for the auditing, certification, periodic surveillance and recertification of Ship recycling Management Systems compliant with
More informationCorrelation Matrix. ISO 9001:2008 and ISO 9001: INTRODUCTION CORRELATION MATRIX ISO 9001:2008 AND ISO 9001:2015
Correlation Matrix ISO 9001:2008 and ISO 9001:2015 INTRODUCTION This document provides a correlation between the requirements of ISO 9001:2008 and the ISO 9001:2015 standard. The document will provide
More informationPre Audit Transition Gap Analysis QMS (ISO 9001 Only)
Pre Audit Transition Gap Analysis QMS (ISO 9001 Only) Company: Contact Name: Certification Number: Email: Contact Number: This document should be used in conjunction with the ISO 9001:2015 standard and
More informationSPECIAL AUDITS WHAT, WHY AND HOW?
SPECIAL AUDITS WHAT, WHY AND HOW? Mike McRandall and Don McFarland (NSF-ISR) Introductions: Mike McRandall NSF-ISR Business Unit Manager, Aerospace mmcrandall@nsf.org Don McFarland NSF-ISR Technical Scheme
More informationSummary of ISO 9001:2015 New and Changed Requirements
This is a summary of the new and changed ISO 9001:2015 requirements compared to ISO 9001:2008. 4. Context of the Organization 4.1 Changes Understanding the Organization and its Context New requirement
More informationQUALITY MANUAL. Number: MAN Dept: Quality. Quality Manual. Rev: Page. 1 of 11
QUALITY MANUAL 1 of 11 Contents 1 PURPOSE AND SCOPE... 3 2 TRIAD PROFILE... 3 3 APPLICALE DOCUMENTS... 3 4 DEFINITIONS / ACRONYMS... 3 5 QUALITY MANAGEMENT SYSTEM PROCESS... 3 6 MANAGEMENT PROCESSES...
More informationISO 9001:2015 QUALITY MANAGEMENT SYSTEM POLICIES AND PROCEDURES
ISO 9001:2015 QUALITY MANAGEMENT SYSTEM POLICIES AND PROCEDURES Origination Date: XXXX Document Identifier: Date: Document Revision: QMS-00 Policies and Procedures Latest Revision Date Abstract: This handbook
More information25 D.L. Martin Drive Mercersburg, PA (717)
QUALITY MANUAL D. L. MARTIN CO. 25 D.L. Martin Drive Mercersburg, PA 17236 (717) 328-2141 Revision 14 August 2012 Michael A. White Manager, QA & Engineering D.L. Martin Co. Quality Manual UNCONTROLLED
More informationADVANCED INTERNAL AUDIT WORKSHOP
ADVANCED INTERNAL AUDIT WORKSHOP By Paul J. Kunder RABQSA QMS Lead Auditor/Aerospace Industry Experienced Auditor RABQSA Approved Aerospace Auditor Transition Training (AATT) Trainer Vice Chair U.S. Z1A
More informationTURBO MACH A DIVISION OF VT SAA
TERMS AND CONDITIONS PAGE: 1 OF 5 1. PURPOSE To define specific terms and conditions for the purchase of product, materials and services. 2. SCOPE All products, materials and services purchased for use
More informationConformity and Certification against ISO 55001
Conformity and Certification against ISO 55001 Presentation IQ-AM Pty Ltd RTO 22515 ABN 77147017525 Some content from other sources utilised for educational purposes Tom Carpenter CEO, IQ-AM Pty Ltd ISO
More informationISO 9001:2000 What does it mean in the supply chain?
ISO 9001:2000 What does it mean in the supply chain? What is ISO 9001:2000? ISO 9001:2000 is an international standard that gives requirements for an organization s Quality Management System ( QMS ). It
More informationThe Third-Party Process: Waste of Resources or Added Value?
The Third-Party Process: Waste of Resources or Added Value? Discussing accredited certification at a cocktail party isn t likely to make you the center of attention. But depending on where you work, you
More informationOCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS REQUIREMENTS WITH GUIDANCE FOR USE (ISO 45001:2018)
OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS REQUIREMENTS WITH GUIDANCE FOR USE (ISO 45001:2018) The International Organization for Standardization (ISO) is currently developing Occupational Health
More informationClause Map IATF 16949:2016 to ISO/TS 16949:2009
Table of Contents Table of Contents Foreword Foreword + Foreword Automotive QMS Standard + History + Goal + 0.5 Goal of this Technical Specification + Remarks for Certification + Remarks for Certification
More informationSupplier Quality Survey. 1. Type of Business: g) Commodities supplied? Supplier Changes/comments: 2. Headcount breakdown by group: Purchasing
Supplier: Phone: Prime Contact/Title: Sales Contact/Title: Address: Fax: e-mail address e-mail address Quality Contact/Title: e-mail address 1. Type of Business: a) Number of years in business? b) Company
More informationGlenair Quality Depends on Me!
Glenair Inc., 1211 Air Way, Glendale California 91201 - Telephone: (818) 247-6000, Fax: (818) 543-0317 Quality Policy and Objectives Glenair Quality Depends on Me! #1 Quality Policy Glenair Quality Depends
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 9001 Quality management systems Requirements Systèmes de management de la qualité Exigences Fourth edition 2008-11-15 Reference number ISO 9001:2008(E) ISO 2008 PDF disclaimer
More information