The sustainability evaluation of an innovative technique of S/S evaluated through a comparative LCA
|
|
- Shauna Moore
- 5 years ago
- Views:
Transcription
1 The 3 rd Sustainable Remediation Conference Ferrara (Italy), September 17-19, 2014 The 3 rd International conference on Sustainable Remediation Theme 3: «Greening» Remediation The sustainability evaluation of an innovative technique of S/S evaluated through a comparative LCA Petra Scanferla, PhD Consorzio Venezia Ricerche Roberto Pellay - MAPINTEC
2 The 3 rd Sustainable Remediation Conference Ferrara (Italy), September 17-19, 2014 Content Case study on HPSS application o o Location and heavy metal contamination of soil The advanced S/S technique HPSS A comparative LCA between HPSS and landfill o o LCA: a tool for the evaluation of the «greening» remediation Results of the environmental impact of two remediation scenario A Conclusion
3 The case study: location URBAN REQUALIFICATION OF «EX ELECTRIC POWER STATION «ENEL» IN S.GIOBBE VENICE» Area of 17,000 m2 The 3rd Sustainable Remediation Conference Ferrara (Italy), September 17-19, 2014
4 The 3 rd Sustainable Remediation Conference Ferrara (Italy), September 17-19, 2014 The case study: contaminants Table 1: Concentration of the heavy metals of concern in the soil fine fraction Heavy metals Heavy metals concentration in soil VS Risk base Acceptable Concentrations Maximum soil concentrations Mean soil concentrations Risk based acceptable concentration** Residential use limits*** Commercial /industrial use limits*** As (mg kg-1 dm*) Cu (mg kg-1 dm*) 1, Hg (mg kg dm*) Pb (mg kg-1 dm*) 2, Sb (mg kg-1 dm*) Sn (mg kg-1 dm*) *soil dry matter **risk threshold level calculated by site specific risk assessment ***(IMD, 2006) for superficial soil (first meter)
5 The 3 rd Sustainable Remediation Conference Ferrara (Italy), September 17-19, 2014 The HPSS technology HPSS technology is capable of stabilising any heavy metals and some organics in a cement matrix produced in accordance with High Performance Concrete (HPC) approaches. The contaminated soil is transformed in very dense, low porous and mechanically resistant cement granular material, which can be reused for the filling of the excavations. HPSS: patent WO/2006/ Lithoidal granular material
6 The HPSS technology CONTAMINATED SITES REMEDIATED APPLYING HPSS Project under development Remediated
7 The HPSS technology The 3 rd Sustainable Remediation Conference Ferrara (Italy), September 17-19, 2014
8 The HPSS technology Due to the low water-cement ratio (W/C), obtained by specific additives (MapePlast ECO 1 ) it is possible obtain: the increasing of the mechanical characteristics of the granules the decreasing of the granules porosity and consequently of the inorganic contaminants leaching heavy metals are stabilized mean their precipitation in much less bio-available Porosity species = 0,61 + 0,23e W/C (Walton, 1990) with HPSS is possible to obtain permeability < 10 8 m/s The aggregate produced is similar to gravel and, after curing, the HM leaching fully comply with: - the Italian environmental regulations for the reusable materials (Italian Decree 5 th February 1998) - the Duch Building Decree (with long term leaching test)
9 The 3 rd Sustainable Remediation Conference Ferrara (Italy), September 17-19, 2014 The HPSS technology The process phases 1. Crushing of the soil and mixing with cement (10%-27%); 2. Mixing with HPSS additives (2-4%); 3. Granulation on a rolling plate
10 The case study: remediation The 3rd Sustainable Remediation Conference Ferrara (Italy), September 17-19, 2014
11 The 3 rd Sustainable Remediation Conference Ferrara (Italy), September 17-19, 2014 LCA: a standardized tool The sustainable remediation How to demonstrate the environmental sustainability of an intervention? v Procedure of Environmental Footprint Analysis dedicated to remediation. v LCA, developed in according to the standard ISO , a standardized procedure internationally recognized
12 The 3 rd Sustainable Remediation Conference Ferrara (Italy), September 17-19, 2014 LCA: a standardized tool The Life Cycle Assessment (LCA) is a well-recognized methodology quantifying inputs and outputs as well as the potential environmental impacts associated with a process throughout its whole life cycle.
13 The 3 rd Sustainable Remediation Conference Ferrara (Italy), September 17-19, 2014 LCA: a standardized tool Applica3on of LCA methodology according to ISO standard (2006), such as to define goal and scope (i.e. func3onal unit, system boundaries..) to collect inventory data (raw material inputs, energy requirements, etc.) to characterize the impact by means environmental indicators (impact categories ), such as Global Warming Poten3al, Ozone Deple3on, Resuorce Consump3on, etc.
14 The 3 rd Sustainable Remediation Conference Ferrara (Italy), September 17-19, 2014 LCA: a standardized tool Primary data Data from case study application Data and software Secondary data International database Ecoinvent Da database internazionali Ecoinvent ed altri Software SimaPro analyst
15 The 3 rd Sustainable Remediation Conference Ferrara (Italy), September 17-19, 2014 The goal: LCA: comparative study 1 Environmental impact quantification of the granular aggregate realized by the application of HPSS technology to obtain the EPD Environmental Product Declaration registration 2 Compare the LCA of HPSS application vs landfill disposal and restoration with virgin soil Methods: EPD2007 IMPACT 2002+
16 The 3 rd Sustainable Remediation Conference Ferrara (Italy), September 17-19, 2014 LCA: comparative study Functional Unit (UF) for comparison: UF: the rehabilitation of 763 Kg of contaminated soil. System boundaries HPSS scenario: excavation of 763 kg of contaminated soil, mixing phase with 190 kg of Portland cement and additives (MapeplastECO1 at 3%), granulation phase, curing phase, achievement of 1 t of granular aggregate, excavation filling with granular material. Landfill scenario: excavation of 763 kg of contaminated soil, landfill transportation and disposal, excavation filling with vergin soil.
17 LCA: comparative study HPSS scenario: flow diagram overall impact (%) (cut off=0.1%)
18 Impact category LCA: comparative study HPSS scenario: impact category results (EPD2007) Unit Total HPSS Aggregate production Reuse of HPSS aggregate Global warming kg CO2 eq 175,1 193,7-18,6 (GWP100) Ozone layer kg CFC-11 eq 9,4E-06 1,2E-05-2,5E-06 depletion (ODP) Photochemical kg C2H4 0,028 0,042-0,014 oxidation Acidification kg SO2 eq 0,301 0,399-0,099 Eutrophication kg PO4--- eq 0,041 0,061-0,021 Non renewable, fossil MJ eq
19 LCA: comparative study HPSS scenario: inventory analisys Impact category Unit Total HPSS Aggregate production Reuse of HPSS aggregate Global warming kg CO2 eq 175,1 193,7-18,6 (GWP100) Ozone layer kg CFC-11 eq 9,4E-06 1,2E-05-2,5E-06 depletion (ODP) Photochemical kg C2H4 0,028 0,042-0,014 oxidation Acidification kg SO2 eq 0,301 0,399-0,099 Eutrophication kg PO4--- eq 0,041 0,061-0,021 Non renewable, fossil MJ eq Portland cement Additive: mapeplast ECO HPSS aggregate production Process Unit GWP (100) Portland cement, strength class Z 52.5, kg CO2 eq 160,6 at plant Acrylic dispersion, MAPEPLAST at plant kg CO2 eq 16,3 Electricity, medium voltage, at grid/it kg CO2 eq 4,5 Electricity HV use in I + imports kg CO2 eq 3,9 Transport, lorry >28t, fleet average kg CO2 eq 3,61 Transport, lorry t, fleet average kg CO2 eq 2,0 Disposal, building, brick, to recycling kg CO2 eq 1,8 Excavation, hydraulic digger kg CO2 eq 0,5 Remaining processes kg CO2 eq 0,21 Total of all processes kg CO2 eq 193,7
20 The 3 rd Sustainable Remediation Conference Ferrara (Italy), September 17-19, 2014 LCA: comparative study HPSS scenario: processes contribution analysis (%) (EPD2007) Raw material acquisition Excavation and stock Crushing Mixing Granulation
21 LCA: comparative study Landfill scenario: flow diagram overall impact (%) (cut off=0.1%)
22 The 3 rd Sustainable Remediation Conference Ferrara (Italy), September 17-19, 2014 LCA: comparative study Landfill scenario: impact category results Impact category Unit Total Excavation and transport to landfill Landfill (disposal of special category) Redevelopment filling with virgin soil Global warming kg CO2 eq 463,5 8,9 442,5 11,6 (GWP100) Ozone layer kg CFC-11 2,48E-05 1,42E-06 2,15E-05 1,86E-06 depletion (ODP) eq Photochemical kg C2H4 0,111 0, , ,00968 oxidation Acidification kg SO2 eq 0,853 0, , ,06236 Eutrophication Non renewable, fossil kg PO ,46 0, , ,01333 eq MJ eq
23 The 3 rd Sustainable Remediation Conference Ferrara (Italy), September 17-19, 2014 LCA: comparative study Landfill scenario: processes contribution analysis (EPD2007) Excavation and landfill transportation Landfill disposal Filling with virgin soil
24 LCA: comparative study HPSS scenario: different principal phases contribution analysis (IMPACT2000+) (metodo IMPAC2002+) Impact category Unit Total Carcinogens kg C2H3Cl eq 0,68 Non-carcinogens kg C2H3Cl eq 1,72 Ozone layer depletion kg CFC-11 eq 0,00 Terrestrial ecotoxicity kg TEG soil 519,96 Terrestrial acid/nutri kg SO2 eq 1,39 Land occupation m2org.arable 0,14 Aquatic acidification kg SO2 eq 0,32 Aquatic eutrophication kg PO4 P-lim 0,00 Global warming kg CO2 eq 169,79 Non-renewable energy MJ primary 1040,10 Mineral extraction MJ surplus 0,55 Landfill scenario: different principal phases contribution analysis (IMPACT2000+) Impact category Unit Total Carcinogens kg C2H3Cl eq 33,38 Non-carcinogens kg C2H3Cl eq 721,03 Ozone layer depletion kg CFC-11 eq 0,00 Terrestrial ecotoxicity kg TEG soil 2991,51 Terrestrial acid/nutri kg SO2 eq 5,96 Land occupation m2org.arable 6,64 Aquatic acidification kg SO2 eq 1,01 Aquatic eutrophication kg PO4 P-lim 0,02 Global warming kg CO2 eq 449,25 Non-renewable energy MJ primary 3093,30 Mineral extraction MJ surplus 1,48
25 Comparison between the scenarios (EPD2007) LCA: comparative study HPSS SCENARIO LANDFILL SCENARIO
26 LCA: comparative study Comparison between the scenarios (IMPACT2002+) HPSS SCENARIO LANDFILL SCENARIO
27 The 3 rd Sustainable Remediation Conference Ferrara (Italy), September 17-19, 2014 Conclusions Estimation of GHG emission for the requalification of the case study (15,000 t) HPSS scenario: 3442 t CO 2 eq Landfill scenario: 9112 t CO 2 eq GHG saving using HPSS in the case study = 5670 t CO 2 eq 2,5 E+06 Liters of gasoline consuption 8,2 Earth's circumference
28 The 3 rd Sustainable Remediation Conference Ferrara (Italy), September 17-19, 2014 Conclusions The possibility to reuse of the treated soil, while the technology requires the use of materials such as cement, makes the scenario significantly more sustainable. The environmental performance of the HPSS scenario, could be further improved (eg: modulation of the Portland quantities of cement in relation to the HM concentrations of each batch treated)
29 Authors details Petra Scanferla ; Roberto Pellay
30 Impact assessment To quantify the impact on both level (i.e. midpoint and endpoint) by the use of IMPACT method (Jolliet et al., 2003)
31 «EX ELECTRIC POWER STATION «ENEL» AND BOTANICAL GARDEN IN S.GIOBBE VENICE» AT THE PRESENT TIME
32 EXAMPLE OF SECTION IN PEDESTRIAN AREA
33 Rhizosphere protections
Life Cycle Assessment (LCA)
Life Cycle Assessment (LCA) Author: Vincenzo Piemonte, Associate Professor, University UCBM Rome (Italy) 1.Theme description The Life Cycle Assessment (LCA) allows to evaluate the interactions that a product
More informationC40 CEM I. Key Information General Process Description Reference Flow 1kg of concrete Reference Year 2012
Key Information General Process Description Reference Flow 1kg of concrete Reference Year 2012 Modelling & Assumptions Detailed model description C40 CEM I This dataset represents average end-of-life conditions
More informationweber Steinlim, dry mortar adhesive
ver1 215 ENVIRONMENTAL PRODUCT DECLARATION in accordance with ISO 1425, ISO 2193 and EN 1584 Owner of the declaration: Program operator: The Norwegian EPD Foundation Publisher: The Norwegian EPD Foundation
More informationFOR Hertalan Easy Weld MF COMPANY INFORMATION / DECLARATION OWNER. MRPI code Xxxxxxx. DATE OF ISSUE May 21 th, END OF VALIDITY May 21 th, 2020
COMPANY INFORMATION / DECLARATION OWNER FOR Hertalan Easy Weld MF MRPI code Xxxxxxx DATE OF ISSUE May 21 th, 2015 END OF VALIDITY May 21 th, 2020 Carlisle Construction Materials bv Industrieweg 16 8263
More informationweber Sprøytebetong V, dry sprayable mortar
ver1 2015 ENVIRONMENTAL PRODUCT DECLARATION in accordance with ISO 14025, ISO 21930 and EN 15804 Owner of the declaration: Program operator: The Norwegian EPD Foundation Publisher: The Norwegian EPD Foundation
More informationDeliverable 29 Life Cycle Flow Diagram (LCFD) for each alternative supply chain configuration considered - 19/07/2016 -
Deliverable 29 Life Cycle Flow Diagram (LCFD) for each alternative supply chain configuration considered - 19/07/2016 - Table of content 1 Introduction... 3 1.1 Project summary... 3 1.2 Partners... 3 1.3
More informationFOR Hertalan Easy Cover COMPANY INFORMATION / DECLARATION OWNER. MRPI code Xxxxxxx. DATE OF ISSUE May 21 th, END OF VALIDITY May 21 th, 2020
COMPANY INFORMATION / DECLARATION OWNER FOR Hertalan Easy Cover MRPI code Xxxxxxx DATE OF ISSUE May 21 th, 2015 END OF VALIDITY May 21 th, 2020 Carlisle Construction Materials bv Industrieweg 16 8263 AD
More informationBuilding LCA calculations for the German Sustainable Building Certificate DGNB Methodology and Benefits
avnir 2011 November 3-4, Lille Anna Braune PE INTERNATIONAL Building LCA calculations for the German Sustainable Building Certificate DGNB Methodology and Benefits Contents: 1. DGNB Methodology Building
More informationEPD. 3 rd P A R T Y V E R I F I E D. ECO EPD Ref. No.: Owner: ISOKLINKER ApS No.: MD EN Issued: Valid to:
ECO EPD Ref. No.: 00000042 Owner: ISOKLINKER ApS No.: MD-14001-EN Issued: 07-04-2014 Valid to: 07-04-2019 3 rd P A R T Y V E R I F I E D EPD VERIFIED ENVIRONMENTAL PRODUCT DECLARATION ISO 14025 & EN 15804
More informationEnvironmental Product Declaration
Environmental Product Declaration Fly ash for concrete, asphalt and cement production This environmental product declaration (EPD) is in accordance with EN ISO 14025 and EN 15804. The product declaration
More informationweber Bolt Zink, dry anchoring mortar
ver1 215 ENVIRONMENTAL PRODUCT DECLARATION in accordance with ISO 1425, ISO 2193 and EN 1584 Owner of the declaration: Program operator: The Norwegian EPD Foundation Publisher: The Norwegian EPD Foundation
More informationweber Understøp, dry grout mortar
ver1 2015 ENVIRONMENTAL PRODUCT DECLARATION in accordance with ISO 14025, ISO 21930 and EN 15804 Owner of the declaration: Program operator: The Norwegian EPD Foundation Publisher: The Norwegian EPD Foundation
More informationBrickwork. Key Information General Process. Modelling & Assumptions Detailed model description
Key Information General Process Brickwork This dataset represents average end-of-life conditions for brickwork in the UK. The modelled product includes mortar. Description Reference Flow 1kg of brickwork
More informationGeneral information. Manufacturer
General information Manufacturer Saint-Gobain Byggprodukter AB Organisation : SE 556241-2592 Box 415 SE-191 24 Sollentuna Sweden Production site: Lyttersta, Vingåker Contact information www.weber.se Arnold
More informationweber Støpemørtel Bad, dry floor screed
ver1 215 ENVIRONMENTAL PRODUCT DECLARATION in accordance with ISO 1425, ISO 2193 and EN 1584 Owner of the declaration: Program operator: The Norwegian EPD Foundation Publisher: The Norwegian EPD Foundation
More informationLife Cycle Assessment of Sports Surfaces
Life Cycle Assessment of Sports Surfaces Gert-Jan Kieft KIWA ISA Sport Shanghai, November 1st 2012 1 Contents Sustainability Purpose of environmental labelling Life Cycle Assessment Aggregation using schadow
More informationEnvironmental Product Declaration. Ginger
Environmental Product Declaration Arper, Monastier di Treviso (TV) Ginger Round top and polished aluminium trestle base (H50, H74, H105) Rev.1 Date: 24-04-2014 Registration N : S-P-00341 UN CPC 38140 OTHER
More informationEnvironmental Product Declaration. Ginger
Environmental Product Declaration Arper, Monastier di Treviso (TV) Ginger Square top and painted aluminium trestle base ( (H50, H74, H105) Rev.1 Date: 24-04-2014 Registration N : S-P-00342 UN CPC 38140
More informationPRODUCT-CATEGORY RULES (PCR)
PRODUCT-CATEGORY RULES (PCR) For preparing an environmental declaration (EPD) for Product Group Asphalt and crushed stone NPCR 18 November 2010 NPCR 18 Asphalt and crushed stone 10.11.2010 1 Content 1.
More informationCenter for Industrial Ecology, ADAI - LAETA,
Avaliação de Ciclo de Vida de uma moradia unifamiliar em Portugal. Comparação de diferentes paredes exteriores e métodos de avaliação de impacte ambiental Helena Monteiro & Fausto Freire helena.monteiro@dem.uc.pt,
More informationDeclaration Owner North American MgO LLC 40 South St. North Aurora, IL
Declaration Owner North American MgO LLC info@northamericanmgo.com 40 South St. North Aurora, IL 60542 630.518.4766 http://www.northamericanmgo.com/ Product MagTech Ultra Magnesium Oxide Board Functional
More informationAsphalt Industry EPD Program Heather Dylla Director of Sustainable Engineering
Asphalt Industry EPD Program Heather Dylla Director of Sustainable Engineering Dec 2, 2015 1 Copyright 2012 Daniel J Edelman Inc. Intelligent Engagement Presentation Takeaways What is an EPD? How is an
More informationLife Cycle Assessment
Life Cycle Assessment Systems Thinking: Electric Cars Example Petrol Car Electric Car 115 g CO 2 emissions / km 0 g CO 2 emissions / km Coal Source Electricity Raw Materials Manufacturing Car Operation
More informationNW STD 20CM GLPW CONCRETE BLOCK
Environmental Product Declaration (EPD) NW STD 20CM GLPW CONCRETE BLOCK is pleased to present this environmental product declaration (EPD) for the Normal Weight Standard (NW STD) 20CM Glass Powder (GLPW)
More informationISO & EN 15804: A1:2013
Owner: Randers Tegl A/S No.: MD-14003-EN_rev1 Revision: Rev1 ECO EPD: 00000796 Issued first time: 23-07-2014 Issued: 21-12-2018 Valid to: 21-12-2023 3 rd P A R T Y V E R I F I E D EPD VERIFIED ENVIRONMENTAL
More informationENVIRONMENTAL PRODUCT DECLARATION In accordance with EN and ISO Isover Roof N 160 mm. Realization data: Version:
ENVIRONMENTAL PRODUCT DECLARATION In accordance with EN 15804 and ISO 14025 Isover Roof N 160 mm Realization data: Version: Main product information General Information Manufacturer: Saint-Gobain Isover
More informationEnvironmental Product Declaration
KONE TRAVELMASTER 110 Environmental Product Declaration Environmental Product Declaration What is an EPD? The Environmental Product Declaration (EPD) provides you as a KONE customer with information on
More informationISO & EN 15804: A1:2013
Owner: Randers Tegl A/S No.: MD-17002-EN_rev1 Revision: Rev1 ECO EPD: 00000641 Issued first time: 16-01-2018 Issued: 21-12-2018 Valid to: 21-12-2023 3 rd P A R T Y V E R I F I E D EPD VERIFIED ENVIRONMENTAL
More informationLife Cycle Impact Results (per yd 3 ) Declared Unit: 1 yd 3 of 4,500 psi concrete at 28 days
Life Cycle Impact Results (per yd 3 ) Declared Unit: 1 yd 3 of 4,500 psi concrete at 28 days Service Rock OPERATIONAL IMPACTS Products 101 Non-renewable primary energy (MJ) 1,482 Renewable primary energy
More informationEnvironmental Product Declaration. Ginger
Environmental Product Declaration Arper, Monastier di Treviso (TV) Ginger Round top and painted aluminium trestle base (H50, H74, H105) Rev.0 Data: 05-06-2017 Registrazione N : S-P-00340 UN CPC 38140 OTHER
More informationLife Cycle Impact Results (per m3)
About Redi-Mix Concrete Life Cycle Impact Results (per m3) 3 Declared Unit: 1 m of 4,000 psi concrete OPERATIONAL IMPACTS 10L11524 Plant Operating Energy (MJ) 11.6 On-Site Plant Fuel Consumption (MJ) 19.5
More informationLife Cycle Impact Results (per m3)
About Redi-Mix Concrete Life Cycle Impact Results (per m3) 3 Declared Unit: 1 m of 24 MPa (3,500 psi) concrete OPERATIONAL IMPACTS 10K11521 Plant Operating Energy (MJ) 17.9 On-Site Plant Fuel Consumption
More informationLife Cycle Impact Results (per m3)
About Redi-Mix Concrete Life Cycle Impact Results (per m3) 3 Declared Unit: 1 m of 24 MPa (3,500 psi) concrete OPERATIONAL IMPACTS Plant Operating Energy (MJ) On-Site Plant Fuel Consumption (MJ) 3 10K11521
More informationEnvironmental Product Declaration
Environmental Product Declaration Basalite Dixon with CarbonCure Concrete Masonry Unit Mix 225 with CarbonCure 1 Introduction Basalite has commissioned CarbonCure Technologies for this Environmental Product
More informationPrecast Concrete Floor Slabs
Key Information General Process Description Reference Flow Reference Year 2012 Modelling & Assumptions Detailed model description Precast Concrete Floor Slabs This dataset represents average end-of-life
More informationLife Cycle Impact Results (per m 3 ) Declared Unit: 1 m 3 of 35 MPa concrete at 28 days
Acera de COMOSA The COMOSA Cuernavaca plant is part of a network of 10 plants within Grupo Comosa (Morelos concrete S.A. de C.V.). The company has been dedicated to the development and distribution of
More informationCASSARA SLABS AND BOULEVARD PAVERS
Environmental Product Declaration (EPD) CASSARA SLABS AND BOULEVARD PAVERS is pleased to present this environmental product declaration (EPD) for Cassara slabs and Boulevard Pavers. This EPD was developed
More informationENVIRONMENTAL PRODUCT DECLARATION In accordance with EN and ISO 14025
ENVIRONMENTAL PRODUCT DECLARATION In accordance with EN 15804 and ISO 14025 12.5mm Gyproc Habito Publication/issue date: 2017/09/29 updated : 2018/08/14 Version : 2 Valid until : 2023/08/14 Registration
More informationLeca Lettklinker 0 32 mm
ver1 2015 ENVIRONMENTAL PRODUCT DECLARATION in accordance with ISO 14025, ISO 21930 and EN 15804 Owner of the declaration: Program operator: The Norwegian EPD Foundation Publisher: The Norwegian EPD Foundation
More informationNeutral Posture North Texas Avenue Bryan, TX
Neutral Posture 3904 North Texas Avenue Bryan, TX 77803 www.neutralposture.com Sustainability@neutralposture.com Neutral Posture is a recognized leader in providing ergonomic solutions, high quality products
More informationConference Theme: Case Study
Quantification of the Environmental Burdens of Two Alternative Approaches for the Wastewater Treatment by Applying LCA: Revamping of an Existing Plant and Construction of a New Plant Conference Theme:
More informationPRODUCT DECLARATION. VANGUARD & CREAKTIVE facade panels ULMA Architectural Solutions. In accordance with ISO and EN 15804: A1: 2013
ENVIRONMENTAL PRODUCT DECLARATION In accordance with ISO 14025 and EN 15804: 2012 + A1: 2013 VANGUARD & CREAKTIVE facade panels ULMA Architectural Solutions PCR 2012:01 CONSTRUCTION PRODUCTS AND CONSTRUCTION
More informationProduct Go! Mobile glassboards. Functional Unit 1 m2 of writing surface for 10 years of use
Declaration Owner Clarus 7537 Jack Newell Blvd N Fort Worth, TX 76118 469.400.7472 www.clarus.com Product Go! Mobile glassboards Functional Unit 1 m2 of writing surface for 10 years of use EPD Number and
More informationLife Cycle Impact Results (per m3)
Life Cycle Impact Results (per m3) About Titan Concrete 3 Declared Unit: 1 m of 6,000 psi concrete OPERATIONAL IMPACTS E1GB5R32 Plant Operating Energy (MJ) 14.7 On-Site Plant Fuel Consumption (MJ) 165.5
More informationConcrete Just Got Greener
Concrete Just Got Greener About Cadman Inc. Life Cycle Impact Results (per m 3 ) Declared Unit: 1 m 3 of 10,000 psi concrete at 28 days OPERATIONAL IMPACTS PerformX PECC10K Plant Operating Energy (MJ)
More informationUnderstanding the Embodied Impacts of Precast Concrete and Other Pipeline Materials.
Understanding the Embodied Impacts of Precast Concrete and Other Pipeline Materials www.concretepipes.co.uk AGENDA Environmental Management who cares? CPSA Embodied Carbon Study background & scope Debunking
More informationEnvironmental Product Declaration Lightweight Blocks with Glass Powder - Milton Plant (Ontario)
Environmental Product Declaration Lightweight Blocks with Glass Powder - Milton Plant (Ontario) Permacon Permacon is pleased to present this environmental product declaration (EPD) for Lightweight blocks.
More informationENVIRONMENTAL PRODUCT DECLARATION In accordance with EN and ISO 14025
ENVIRONMENTAL PRODUCT DECLARATION In accordance with EN 15804 and ISO 14025 Gyproc Rf 15 mm Date: 31 st January 2014 Version : 1 N VERIFICATION 60460036_GYPROC General information Manufacturer: Saint-Gobain
More informationThe Dutch LCA and EPD database for building assessments
The Dutch LCA and EPD database for building assessments Structure, management and control structure Agnes Schuurmans Member technical committee SBK database for MRPI Chairman NEN commission 351281 Sustainability
More informationENVIRONMENTAL PRODUCT DECLARATION
ENVIRONMENTAL PRODUCT DECLARATION In accordance with ISO 14025 for Quarzolite Base Coat Quarzolite Pittura Quarzolite HF Plus Quarzolite Tonachino Programme: The International EPD System; www.environdec.com
More informationLife Cycle Impact Results (per yd 3 ) Declared Unit: 1 yd 3 of 4,500 psi concrete at 28 days
Life Cycle Impact Results (per yd 3 ) Declared Unit: 1 yd 3 of 4,500 psi concrete at 28 days Nevada Ready Mix OPERATIONAL IMPACTS Corporation 4552F Non-renewable primary energy (MJ) 1,429 Renewable primary
More informationTHE FOOTPRINT OF LEADERSHIP
THE FOOTPRINT OF LEADERSHIP Closer to you and the environment LIFE CYCLE ASSESSMENT CONTENTS 1 ROLLAND ENVIRO HAS THE SMALLEST ENVIRONMENTAL FOOTPRINT 2 WHAT IS A LIFE CYCLE ASSESSMENT? 4 THIS IS ROLLAND
More informationInstitut Bauen und Umwelt e.v. (IBU) The International EPD System EPD-CIS CAA1-EN S-P ECO /11/ /11/2020
ENVIRONMENTAL PRODUCT DECLARATION as per ISO 14025 and EN 15804 Registered under the scope of mutual recognition between The International EPD System and Institut Bauen und Umwelt e.v (IBU) Programme holder:
More informationProduct Environmental Profile
LEGRAND COMPANY OVERVIEW Designed to Be Better Our Commitment to Sustainability At Legrand, our sustainability commitment translates into greater benefits and tangible value for our customers, business
More informationEPD Environmental Product Declaration EPD 2202 MATRIX REVESTIMENTO FACHADA BY VOTORANTIM CIMENTOS (50 KG PACK)
EPD ENVIRONMENTAL PRODUCT DECLARATION EPD Environmental Product Declaration EPD 2202 MATRIX REVESTIMENTO FACHADA BY VOTORANTIM CIMENTOS (50 KG PACK) ENVIRONMENTAL PRODUCT Registration number: S-P-00897
More informationUsing databases from different data providers in parallel for a case study on light bulbs
Using databases from different data providers in parallel for a case study on light bulbs Andreas Ciroth GreenDelta GmbH San Francisco, LCAXIV, Oct 8 2014 Using databases from different data providers
More information2015 UL LLC. All Rights Reserved
This declaration is an environmental product declaration (EPD) in accordance with ISO 14025. EPDs rely on Life Cycle Assessment (LCA) to provide information on a number of environmental impacts of products
More informationEnvironmental Product Declaration ISO 14025
Environmental Product Declaration ISO 14025 Catifa 53, 4-leg NEPD-nr: 104E Approved 04.08.2011 in accordance with ISO14025, 8.1.4. Valid until: 04.08.2016 Signature: Verification of data: Independent verification
More informationENVIRONMENTAL PRODUCT DECLARATION
ver1 215 ENVIRONMENTAL PRODUCT DECLARATION in accordance with ISO 1425, ISO 2193 and EN 1584 Owner of the declaration: Program operator: Publisher: Declaration number: Registration number: ECO Platform
More informationProduct Environmental Profile
LEGRAND COMPANY OVERVIEW Designed to Be Better Our Commitment to Sustainability At Legrand, our sustainability commitment translates into greater benefits and tangible value for our customers, business
More informationA hybrid life cycle analysis method for the environmental assessment of conventional building materials
EinB2017 6thInternational Conference ENERGY in BUILDINGS 2017 A hybrid life cycle analysis method for the environmental assessment of conventional building materials Konstantinos Sentzas email ksentzas@gmail.com
More informationEnvironmental Product Declaration Standard and Noble Blocks with Glass Powder - Montreal Plant (Quebec)
Environmental Product Declaration Standard and Noble Blocks with Glass Powder - Montreal Plant (Quebec) Permacon Permacon is pleased to present this environmental product declaration (EPD) for Standard
More informationEnvironmental Product Declaration
Environmental Product Declaration According to ISO 14025 Fabricated Steel Reinforcing Bar (Rebar) Issue Date: August 7, 2017 Valid Until: August 7, 2022 Copyright ASTM International, 300 Barr Harbor Drive,
More informationEnvironmental Product Declaration. SULB Company B.S.C.(c) Hot-Rolled Structural Steel
Environmental Product Declaration Hot-Rolled Structural Steel 1. General Information Name of the Manufacturer: Program Operator: ASTM International EPD 080 Reference PCR: IBU PCR Part A: Part A: Calculation
More informationEnvironmental Effects Life Cycle Assessment of Bridges, Methodology Overview
Environmental Effects Life Cycle Assessment of Bridges, Methodology Overview Johanne Hammervold, Marte Reenaas and Helge Brattebø Norwegian University of Science and Technology (NTNU) Dept. of Hydraulic
More informationSouth Dakota USGS 104B 2013 Annual Report
South Dakota USGS 104B 2013 Annual Report Title: Life cycle assessment analysis of engineered stormwater control methods common to South Dakota Investigators: Dr. James Stone, South Dakota School of Mines
More informationNeutral Posture North Texas Avenue Bryan, TX
Neutral Posture 3904 North Texas Avenue Bryan, TX 77803 www.neutralposture.com Sustainability@neutralposture.com Neutral Posture is a recognized leader in providing ergonomic solutions, high quality products
More informationColumns Product. ENVIRONMENTAL PRODUCT DECLARATION In accordance with ISO 14025, ISO and EN Skonto Prefab SIA
1114 Ver. 2:214 ENVIRONMENTAL PRODUCT DECLARATION In accordance with ISO 1425, ISO 2193 and EN 1584 Publisher The Norwegian EPD Foundation NEPD285E Declaration number 1.12.214 Issue date 1.12.219 Valid
More informationKONE TravelMaster 110. Environmental product declaration
KONE TravelMaster 110 Environmental product declaration Environmental product declaration General information This Environmental Product Declaration (EPD) provides you with information on the environmental
More informationLEADERSHIP Closer to you and the environment
THE FOOTPRINT OF LEADERSHIP Closer to you and the environment LIFE CYCLE ASSESSMENT CONTENTS 1 ENVIRO HAS THE SMALLEST ENVIRONMENTAL FOOTPRINT 2 WHAT IS A LIFE CYCLE ASSESSMENT? 4 THIS IS ENVIRO S ENVIRONMENTAL
More informationEnvironmental Product Declaration (EPD) according to EN and ISO Portland-composite cement (CEM II) produced in Europe
Environmental Product Declaration (EPD) according to EN 15804 and ISO 14025 Portland-composite cement (CEM II) produced in Europe - 2 - Owner of the Declaration CEMBUREAU, the European Cement Association
More informationHollow Core Slabs Product
1114 Ver. 2:214 ENVIRONMENTAL PRODUCT DECLARATION In accordance with ISO 1425, ISO 2193 and EN 1584 Publisher The Norwegian EPD Foundation Declaration number NEPD286E 1.12.214 Issue date 1.12.219 Valid
More informationEnvironmental product declaration. KONE MonoSpace Special
Environmental product declaration KONE MonoSpace Special Environmental product declaration General information The Environmental Product Declaration (EPD) provides you as a KONE customer information on
More informationENVIRONMENTAL PRODUCT DECLARATION In accordance with EN and ISO 14025
ENVIRONMENTAL PRODUCT DECLARATION In accordance with EN 15804 and ISO 14025 Multimax 30 120mm Date of realisation : 2 september 2013 Version : 1.2 General information Manufacturer: Saint-Gobain Construction
More informationCarbon footprint calculation and Principles of Life Cycle Evaluation for a Bioenergy Plant
Source: US DOE Nov 10 Carbon footprint calculation and Principles of Life Cycle Evaluation for a Bioenergy Plant Dr Nawshad Haque Web: www.users.tpg.com.au/nawshadul 24 th July 2016 Presentation 3 Nawshad
More informationVIEW DYNAMIC GLASS PROCESSED GLASS
ENVIRONMENTAL PRODUCT DECLARATION VIEW DYNAMIC GLASS PROCESSED GLASS A leader in building innovation, View Inc. is the first company to successfully advance the large-scale commercialization of dynamic
More informationENVIRONMENTAL PRODUCT DECLARATION In accordance with EN and ISO 14025
ENVIRONMENTAL PRODUCT DECLARATION In accordance with EN 15804 and ISO 14025 Sonepanel 50 mm Date of realisation : 2 september 2013 Version : 1.2 General information Manufacturer: Saint-Gobain Construction
More informationLife Cycle Assessment of Tetra Recart Cartons and Alternative Soup Containers on the U.S. Market July 2014
Life Cycle Assessment of Tetra Recart Cartons and Alternative Soup Containers on the U.S. Market July 2014 Presentation Overview 1. LCA Methodology 2. Soup Packaging LCA Goal & Scope 3. Soup Packaging
More informationWhat Does It All Mean?
What Does It All Mean? 1 Environmental Product Declaration (EPD) Provide quality assured and comparable information regarding environmental performance of a product and/or service Type Standard 3 rd party
More informationLife Cycle Impact Results (per m3)
About Argos Ready Mix South Central Life Cycle Impact Results (per m3) 3 Declared Unit: 1 m of 5,000 psi concrete at 56 days OPERATIONAL IMPACTS Plant Operating Energy (MJ) On-Site Plant Fuel Consumption
More informationEnvironmental Performance of Wood Products. CHEM-E2115 Wood Products: Application and Performance
Environmental Performance of Wood Products CHEM-E2115 Wood Products: Application and Performance Some words about me Education Bachelor of Engineering (Wood Techn.) from Lahti University of Applied Sciences
More informationLeca Lydblokk, Lightweight Concrete Block Product
Ver. 2:2014 ENVIRONMENTAL PRODUCT DECLARATION ISO 14025 ISO 21930 EN 15804 Owner of the declaration Program holder Declaration number Issue date Valid to The Norwegian EPD Foundation Leca Lydblokk, Lightweight
More informationENVIRONMENTAL PRODUCT DECLARATION
ENVIRONMENTAL PRODUCT DECLARATION HOT-DRAWN REINFORCING STEEL FOR CONCRETE IN BARS AND COILS Based on: PCR 2012:01 Construction products and Construction services, Version 2.1, 2017-01-04 and EN:15804:2014
More informationENVIRONMENTAL PRODUCT DECLARATION in accordance with ISO 14025, ISO and EN Owner of the declaration:
ver1 215 ENVIRONMENTAL PRODUCT DECLARATION in accordance with ISO 1425, ISO 2193 and EN 1584 Owner of the declaration: Program operator: Publisher: Declaration number: NEPD-398-28-EN Issue date: 25.1.216
More informationLeca Lettveggsblokk 118 mm, Lightweight Concrete Block Product
Ver. 2:2014 ENVIRONMENTAL PRODUCT DECLARATION ISO 14025 ISO 21930 EN 15804 Owner of the declaration Program holder Declaration number Issue date Valid to The Norwegian EPD Foundation Leca Lettveggsblokk
More informationTechnology trains in the framework of the HOlistic Management of Brownfield REgeneration
The 3 rd International conference on Sustainable Remediation Conference theme: Case Studies Technology trains in the framework of the HOlistic Management of Brownfield REgeneration Oriana Capobianco, Renato
More informationITALCEMENTI. EPD - Environmental Product Declaration. i.idro DRAIN
ITALCEMENTI EPD - Environmental Product Declaration i.idro DRAIN Air content >15% and < 25% Draining capacity (aggregates size Xlarge 6-11mm) >1000 mm/min Draining capacity (aggregates size Large 2-6mm)
More informationProduct Category Rules (PCR) Wild caught fish
Product Category Rules (PCR) for preparing an Environmental Product Declaration (EPD) for Product Group Wild caught fish Table of contents: 1. General information...2 2. Product description...2 3. List
More informationLife Cycle Impact Results (per m 3 ) Declared Unit: 1 m 3 of 40 MPa concrete at 28 days
Life Cycle Impact Results (per m 3 ) Declared Unit: 1 m 3 of 40 MPa concrete at 28 days OPERATIONAL IMPACTS Non-renewable primary energy (MJ) Cruz Azul C1-151 2,667 Renewable primary energy (MJ) 33 Total
More informationLife Cycle Assessment as a tool for resource optimisation of continuous basalt fibre production in Iceland
Engineering Conferences International ECI Digital Archives Life Cycle Assessment and Other Assessment Tools for Waste Management and Resource Optimization Proceedings 6-6-2016 Life Cycle Assessment as
More informationEnvironmental Assessment of an Innovative Plant for the Wastewater Purification in the Beverage Industry
Environmental Assessment of an Innovative Plant for the Wastewater Purification in the Beverage Industry Marco Bortolini, Lucia Botti, Mauro Gamberi, Riccardo Manzini, Cristina Mora, Alberto Regattieri
More informationLife Cycle Assessment of the HP Pro x2 612 G2 Tablet in the United States
Life Cycle Assessment of the HP Pro x2 612 G2 Tablet in the United States Life cycle inventories and impact assessment of the HP Pro x2 612 G2 Tablet Final Summary Report Prepared for: Date: June 11, 2018
More informationENVIRONMENTAL PRODUCT DECLARATION
ENVIRONMENTAL PRODUCT DECLARATION STEEL PRODUCTS: STRETCHED COIL ELECTROWELDED MESH COLD ROLLED Based on: PCR 2012:01 Construction products and Construction services, Version 2.1, 2017-01-04 and EN:15804:2014
More informationEPD Environmental Product Declaration
EPD ENVIRONMENTAL PRODUCT DECLARATION EPD Environmental Product Declaration FCK 30 MPA BR.1 ABAT 10+-2 by Votorantim Cimentos Registration number: S-P-00896 Published on 20-06-2016, valid until 20-06-2021
More informationI m Green PE Life Cycle Assessment
I m Green PE Life Cycle Assessment Introduction One of the greatest challenges faced by our society is to reduce its greenhouse gas emissions to ensure that we do not have climactic changes leading to
More informationLife Cycle Assessment (LCA) - Overview
Life Cycle Assessment (LCA) - Overview Dr. David E. Meyer, Dr. Mary Ann Curran (Retired) Photo image area measures 2 H x 6.93 W and can be masked by a collage strip of one, two or three images. The photo
More informationArcelorMittal Construction Mineral wool sandwich panels
ENVIRONMENTAL PRODUCT DECLARATION According to EN 15804 Mineral wool sandwich panels Promistyl/Ondafibre (Induswall - Archwall - Indusroof) Taranos/Pflaum FO - Vulcanos/Pflaum FOM - Agnios/Pflaum FI -
More information