Release Notes OASIS April 18, Version 1.1

Transcription

1 Release Notes OASIS Version 1.1 April 18, 2013

2 REVISION HISTORY VERSION NO. DATE DESCRIPTION /09/2012 Initial version /18/2013 Updates on the Report Summary & API Specifications document sections Page 2 of 8

3 Release Identification Application/System Name OASIS Version Identifier Production Release Projects Spring 2013 Release LMPM Local Market Power Mitigation Enhancements Pay for performance regulation - FERC755 Enhancements Included Project: LMPM Local Market Power Mitigation Enhancements In addition to existing data publication from the day-ahead and HASP markets, these reports will be enhanced to provide RTPD market results in this release: MPM RT Locational Marginal Prices (LMP) Posts hourly, the four 15-minute Locational Marginal Prices from the HASP and additionally RTPD MPM runs for all PNodes and APNodes in $/MWh. Posts the LMP, plus the Competitive Congestion, Non-Competitive Congestion, Loss and Energy Components that make up the LMP. MPM Nomogram/Branch Shadow Prices Posts the constraint pricing at each binding Nomogram and Branch, for each Market Process of the MPM run (DAM, HASP, additionally RTPD) in $/MWh. Posted hourly for the DAM and four 15-min intervals per hour for HASP and RTPD. Report will also include an indication of whether the Constraints were binding because of the base operating conditions or contingencies, and if caused by a Contingency, the identity of the specific Contingency. MPM Intertie Constraint Shadow Prices Posts the constraint pricing at Transmission Interfaces and Intertie Constraints, for each Market Process of the MPM run (DAM, HASP, additionally RTPD) in $/MWh. Posted hourly for the DAM and four 15-min intervals per hour for HASP or RTPD. Report will also include an indication of whether the Constraints were binding because of the base operating conditions or contingencies, and if caused by a Contingency, the identity of the specific Contingency. MPM Reference Bus Posts the reference bus used in the MPM run. Posted hourly for the DAM and four 15-min intervals per hour for HASP and additionally RTPD. Market Power Mitigation Status - Mitigation Indicator showing whether any bids were replaced by Reference Curves. Value will be Y or N. In addition to existing data publication from the day-ahead market, these reports will be enhanced to provide HASP and RTPD market results in this release: Page 3 of 8

4 MPM Nomogram/Branch Competitive Paths Posts the hourly results of the dynamic competitiveness constraint for the Day-Ahead, additionally HASP and RTPD MPM runs, for nomograms and flowgates. Posts a flag indicating whether each binding constraint was competitive or not. MPM Intertie Constraint Competitive Paths Posts the hourly results of the dynamic competitiveness constraint for the Day-Ahead, additionally HASP and RTPD MPM runs, for interchanges, market scheduling limits, and branch groups. Posts a flag indicating whether each binding constraint was competitive or not. A new graphical-user interface report (no API) will be available: MPM Default Competitive Path Assessment List Posts the results of the default competitive path assessment. Default list is used for mitigation of real-time exceptional dispatches, and is also used for mitigation of a market run in the event that the dynamic competitive path assessment process fails. Posted daily for day-ahead and real-time markets. Only competitive transmission constraints are posted; a transmission constraint is deemed not competitive if the constraint is not posted on the list. Project: Pay for performance regulation - FERC755 The following reports will be enhanced to provide results relating to the new ancillary service product Regulation Mileage Up (RMU) and Regulation Mileage Down (RMD) in this release: AS Clearing Prices - Posts the Ancillary Services Regional Shadow Price for all Ancillary Service types for all binding AS Regions and Sub-Regional Partitions. New ancillary service mileage-related products will be applicable for the Day-Ahead market results. Interval AS Clearing Prices - Ancillary Services Regional Shadow Price for all Ancillary Service types for all binding AS Regions and Sub-Regional Partitions. New ancillary service mileage-related products will be applicable for the RTPD market results. AS Requirements - Ancillary Service Capacity Minimum and Maximums per AS Region. New ancillary service mileage-related products will be applicable for the Day-Ahead market. A new report will be made available to provide RTPD market AS requirements. Note: When encountering a max A/S limit of zero, please interpret this as "no limit". AS Results - Ancillary Service Capacity procured and self-scheduled, by AS type, posted for each AS Region. Also posts the sum of the procured and self-scheduled. New ancillary service mileagerelated products will be applicable for the day-ahead and RTPD market results. Public Bids - Clean Bid payloads used in the markets, with certain fields replaced by pseudo data as indicated. New ancillary service mileage-related products will be applicable for the day-ahead Page 4 of 8

5 and RTPD market results. A new data attribute opportunity cost, represented by the Y2 axis is added on the report. A new graphical-user interface report (no API) will be available: Average Instructed Mileage Lists average Instructed Mileage (MW) from the prior seven days for each hour of a trading day. Posted daily prior to the close of the Day Ahead Market. For example, for trading day April 9, data will be published prior to the DAM market close on April 8 and will consist of average Instructed Mileage between April 1 to April 7. Respective publication & revision log entries will be posted signifying data availability on any of the enhanced reports listed above. Page 5 of 8

6 Report Summary: The following table lists the enhanced reports in this release that will post additional HASP or RTPD market results relating to the Local Market Power Mitigation (LMPM) project: Graphical User-Interface (GUI) Report MPM RT Locational Marginal Prices (LMP) MPM Nomogram/Branch Shadow Prices MPM Intertie Constraint Shadow Prices MPM Nomogram/Branch Competitive Paths MPM Intertie Constraint Competitive Paths Application Programming Interface (API) Single Query Group Query Market PRC_MPM_RTM_LMP RTPD_MPM_LMP_GRP RTPD PRC_MPM_RTM_NOMOGRAM PRC_MPM_RTM_FLOWGATE PRC_MPM_RTM_NOMOGRAM_ CMP PRC_MPM_CNSTR_CMP RTPD_MPM_SD_PRC_GRP RTPD RTPD_MPM_SD_PRC_GRP RTPD HASP_MPM_SD_PRC_GRP RTPD_MPM_SD_PRC_GRP HASP_MPM_SD_PRC_GRP RTPD_MPM_SD_PRC_GRP HASP RTPD HASP RTPD MPM Reference Bus PRC_MPM_RTM_REF_BUS n/a RTPD Market Power Mitigation Status ENE_MPM n/a RTPD The following table lists the enhanced reports in this release that will post new ancillary service product Regulation Mileage Up (RMU) and Regulation Mileage Down (RMD) market results relating to the Pay for performance regulation - FERC755 project: Graphical User-Interface (GUI) Report Application Programming Interface (API) Single Query Group Query AS Clearing Prices PRC_AS DAM_PRC_AS_GRP DAM Market Interval AS Clearing Prices PRC_INTVL_AS RTM_PRC_AS_GRP RTPD AS Requirements AS_REQ DAM_AS_GRP RTM_AS_GRP DAM RTPD AS Results AS_RESULTS DAM_AS_GRP RTM_AS_GRP DAM RTPD Public Bids n/a PUB_DAM_GRP PUB_RTM_GRP DAM RTM Page 6 of 8

7 Variances and Issues Addressed Report: Flexible Ramping Constraint Results API: PRC_FLEX_RAMP Variance: Duplicate data records seem to be existent on the API data output records where the trade day falls on a Long Day and with the repeating hour 25. This is due to the missing hour-ending data attribute in the API output (xml & csv) based on the market run datetime values. Note: The hourending based on the market run datetime is displayed on the user-interface report, thus able to properly display the records falling/transitioning to the repeating hour 25 based on the market run datetime and its respective interval datetime values. Per deployment of OASIS 6.3.0, a new data element MKT_START_HE will be added onto the API output on both xml and csv files. Report: Pnode Listing API: ATL_PNODE Variance: Data elements MAX_CB_MW_EFF_START_DT and MAX_CB_MW_EFF_END_DT incorrectly contains a "T" character for NULL date values on the report s XML output file. Per deployment of OASIS 6.3.0, data elements MAX_CB_MW_EFF_START_DT and MAX_CB_MW_EFF_END_DT will not exist/appear in the report s XML output file. Page 7 of 8

8 OASIS API Specifications The following updated technical specifications document version and affected schema files for application release OASIS can be accessed at: under the Release Planning/Spring 2013 release/oasis technical specifications heading. - Interface Specification for OASIS Clean - Interface Specification for OASIS Redline - Map-Stage Environment Artifacts Package v These interface specifications document has been updated per last posting v to: Correct previously invalid and/or missing sample queries relating to the LMPM shadow prices, competitive paths, reference bus reports; and RTPD Ancillary Service reqts & results group query. Include a new attribute Opportunity Cost represented by the SCH_BID_Y2AXISDATA data element on the Public Bid report; this data element is associated with the Regulation Up/Down product bids per FERC 755 project. On other currently existing Convergence Bidding or CRR reports, correct typo-graphical data element names to align with the XML output file. This artifacts package has been updated per last posting v to add a new SCH_BID_Y2AXISDATA data element on the OASISBid.xsd schema file. - Production Environment Artifacts Package v This is a new artifacts package posting These updated specifications v replace all the previously posted v documents. This same set of specifications v are also accessible on the Application Access page, under the OASIS, Technical specifications, Interface specification, Version3_11 sub-heading at Overall, for Spring 2013 the modified schema files contained in the artifacts package above per application release OASIS are on: OASISReport.xsd OASISBid.xsd These other schema files contained in the artifacts package above do not have any changes per application release OASIS 6.3.0, but are still included to reference the complete set of OASIS artifacts. OASISMaster.xsd OASISCBBid.xsd OASISCRRPublicBid.xsd For development code migration purposes, please note that the namespace domain in the schema definition file (XSD) is environment-dependent as follows: Environment Market and Performance Stage Production Namespace Domain oasismap.caiso.com oasis.caiso.com Market participants who opt to download any of the new or enhanced reports in XML format and validate against the schema file must use the updated schema files posted. Page 8 of 8