IIJ11IIORONIU Michael Pacholok, -

Transcription

1 Addenda, IIJ11IIORONIU Michael Pacholok, - Purchasing Chief Purchasing Officer and Materials Management Division Sabrina Dipietro City Hall, 18th Floor, West Tower Manager 100 Queen Street West Construction Services Toronto, Ontario M5H 2N2 February 4, 2019 Reply to: Max Parker Tel: (416) Addendum No. 7 Tender No Via Website Posting: 9 Pages RE: (REVISED) Office Renovation Located at 2 Hobson Ave. North York. CLOSING DATE: 72:00 P.M. NOON (LOCAL TIME), FEBRUARY Please refer to the above Tender Call document in your possession and be advised of the following information: 7. Clarification of Attachments The attached eight (8) pages (A2.0, A2.2, AS, A6, and A7) were cited in Addendum No. 2, January 4, 2019 but were not included. dated All other information regarding the call document is unchanged. All other terms and conditions remain the same. Should you have any questions regarding this addendum contact Max Parker, Corporate Buyer, at Max.Parker@toronto.ca Please attach this addendum to your Request for Tender document and be governed accordingly. Bidders must acknowledge receipt of all addenda on the space provided on the Tender Call Cover Page as per the Process Terms and Conditions, Section 1, Item 9 - of the Tender Call docum. II other aspects of the Tender remain the same. Your tr y, ) Sa D pietro, Ma er, Construction Services, Purchasing & Materials Management fljiiiurunto Lo

2

3

4

5

6

7 City of Toronto Architectural Specifications Specifications CITY CLERK S OFFICE MODERNIZATION Section Paul Didur Architect 2 Hobson Ave, North York, ON, M4A 1Y2 Decorative & Security Window Films Revision 1, December 21 st, GENERAL Summary Work of this section includes decorative / privacy interior window film to be applied on all new glazing wall systems as well as security film to be applied on exterior windows in Microfiche Storage 103. Refer to Architectural Plan A2.0 for locations, and to 4/ A3.0 for typical elevation detail. 1.1 References Section Aluminum Doors and Frames Section Glazing. 1.3 Submittals Manufacturer's Product Data for specified products in accordance with Section Submittal Procedure Submit shop drawings showing layout, profiles, and product components, including dimensions, anchorage, and accessories Samples: 4 inch by 4 inch Samples of specified texture, color and/or pattern for verification. 1.4 Quality Assurance Obtain all products in this section from a single Manufacturer with a minimum of 10 years experience Installer: Installation shall be performed by a trained and qualified installer, specialized and experienced in work required for this project..1 A list of experienced installation integrators is available from 3M Architectural Markets Department, or mhassenauer@mmm.com 1.5 Product Delivery, Storage, And Handling Deliver products in manufacturer's original, unopened, undamaged containers with identification labels intact Store products protected from weather, temperature, and other harmful conditions as recommended by supplier Product must remain in original plastic bag and boxes and have storage conditions as follows:.1 40 F (4 C) - 90 F (32 C) storage temperature range.2 Out of Sunlight.3 Clean dry area.4 Original container.5 Do not stack boxes over six (6) units high. Excessive weight can damage the film.6 Products are not recommended for interior applications where condensation consistently occurs..7 Handle products in accordance with manufacturer's instructions..8 Total pre-installation shelf life: 2 years. Up to 2 years unprocessed, OR process within 1 year and apply within 1 year of processing 1.6 Project/Site Conditions Confirm appropriate substrate is suitable for mounting of glass finish components prior to start of installation Apply materials when environmental conditions are within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer s absolute limits. Apply the film in a temperature range from 53 F to 100 F (12 C to 38 C). 1

8 City of Toronto Architectural Specifications Specifications CITY CLERK S OFFICE MODERNIZATION Section Paul Didur Architect 2 Hobson Ave, North York, ON, M4A 1Y2 Decorative & Security Window Films Revision 1, December 21 st, PRODUCTS 3.1 Material Provide film on all interior glazed walls General:.1 Decorative Polyester Glass and Plastic Finishes Film field applied to glass material as visual opaque or decorative film, Product: Fasara..1 Security Film; Plastic Film field applied to glass material as an added security feature. Product: Ultra Series, clear..2 Decorative custom printed City of Toronto Map, 36 h to clear window film, second surface, Room Names: 15 wide x 36 high Room Number: 10 wide x 36 high Manufacturers:.1 3M Window Film Solutions, available through Convenience Group Inc. distributor or equal, for exterior windows..2 BGM Imagining, Contact: Jasmin Chandler P: , C: , E:jchandler@tigroup.ca Decorative Pattern: Printed / patterns in horizontal stripes or clear for security film; to later selection by Architect Adhesive: Acrylic, Pressure Sensitive Liner: Silicone-coated Polyester or as produced by manufacturer for specific use Average Overall Thickness; (Film and Adhesive without Liner): 76 microns (3 mils) Decorative Film; Security Film as specified by manufacturer. 3. EXECUTION 3.1 Examination Examine substrate(s) for compliance. Do not proceed with installation until unsatisfactory conditions have been corrected Do not proceed with installation until unsatisfactory conditions have been corrected Responsibility for state of surfaces prior to installation to be pre-determined by installation specialist Proceeding with installation implies installer s acceptance of substrate and conditions. 3.2 Surface Preparation Comply with all manufacturer s instructions for surface preparation Thoroughly clean substrate of substances that could impair the overlay s bond, including mold, mildew, oil, grease Re-clean surfaces with appropriate surface prep solvent and remove any haze or surface contamination. 3.3 Application Application must be performed by qualified installer Do not proceed with installation until all finishing work has been completed in and around the work area Verify pattern prior to material acquisition Comply with manufacturer s installation instructions applicable to products and applications indicated, except where more stringent requirements apply Install substrates with no gaps or overlaps. Form smooth, wrinkle-free, bubble-free surface for finished installation Remove air bubbles, wrinkles, blisters and other defects. Use approved procedures to prevent the formation of air bubbles, wrinkles, blisters and other defects. 2

9 City of Toronto Architectural Specifications Specifications CITY CLERK S OFFICE MODERNIZATION Section Paul Didur Architect 2 Hobson Ave, North York, ON, M4A 1Y2 Decorative & Security Window Films Revision 1, December 21 st, Cleaning And Protection Use cleaning methods recommended by architectural surfacing manufacturer for applicable environment Protect completed glass finish during remainder of construction period. END OF SECTION 3