Compact Push-On Fittings

Transcription

1 4" - 24" DUCIE IRON PUS-ON OIN COMPC FIINGS GENER SPECIFICIONS MERI: PRESSURE: ESING: Ductile iron per SM PSI rating for 4" - 24" sizes. Pressure rating applies to fittings only and does not apply to restraining lugs or external restrainers In accordance with and U requirements YING ENG: In accordance with (fittings not listed in NSI/WW have dimensions per Star design as noted in the catalog) WEIGS: FNGES: CEMEN INING: COING: re in pounds, unless noted otherwise and do not include accessories, cement lining and coating Flanged ends on fittings match NSI/WW C115/21.15 and NSI 16.1 class 125 flanges In accordance with NSI/WW C104/ sizes 4" - 24" double thickness. Click here for a pressure jetting discussion or visit /pressure_cleaning_guidelines.asp. sphaltic seal coat inside and out in accordance with NSI/WW C104/21.4 and referenced in GSKES: Dual hardness SR in accordance with NSI/WW C111/21.11 (see pg. 37) PPROVS: DIMENSIONS: INSION: 4" - 12" U/UC isted 4" and greater are U/NSI/NSF Standards 61 and 372 4" - 12" FM pproved. Please consult factory for detail listing and approvals. ll dimensions are in inches unless noted otherwise. (Click here for a short commentary on non-pressure sewer applications or visit /non-pressure_sewer_applications.asp. Review commentary before ordering or installing fittings for this application. Per NSI/WW C600 and C111 using DIP conforming to C150/C151 and PVC pipe conforming to C900/C905 C D C D 7/8 DI. 2 OES 7/8 DI. 2 OES.C. Ø.C. Ø MEMER PPROVED 4"-12" S 14"-24" S PUS-ON OIN DIMENSIONS Ø.C. C D Please note: ll fittings are standard with two (2) restraining lugs. ends 45 & 90 in sizes 4" -12" are also available with four (4) restraining lugs. Page 31

2 PO x PO ENDS 90º PO x PO ENDS (¼) W (S.) 45º PO x PO ENDS (⅛) W (S.) 22 ½º PO x PO ENDS ( ) W (S.) 11 ¼º PO x PO ENDS ( ) W (S.) PO x PE ENDS 90º PO x PE ENDS (¼) W (S.) 45º PO x PE ENDS (⅛) W (S.) 22 ½º PO x PE ENDS ( ) W (S.) 11 ¼º PO x PE ENDS ( ) W (S.) PO x PPED CROSS MX. P W (S.) hreads in ccordance with NSI/SME PO x PPED EE MX. P W (S.) hreads in ccordance with NSI/SME Page 32

3 PO x FE ENDS 90º PO x FE ENDS (¼) W (S.) 45º PO x FE ENDS (⅛) W (S.) 22 ½º PO x FE ENDS ( ) W (S.) 11 ¼º PO x FE ENDS ( ) W (S.) PO x PO EES (Con t) PO x PO EES 1 1 W (S.) 4 x x x x x x x x x x x x x x x x x x x (Con t) 1 W (S.) 16 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Page 33

4 1 1 PO x FE EES 1 W (S.) 4 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x PO x PE EES 1 W (S.) 6 x x x PO ERS Y Y 1 1 Y W (S.) 4 x x x x x x x x x x x x x x x x x x x x x x x x Page 34

5 1 1 1 PO CROSSES 1 W (S.) 4 x x x x x x x x x x x x x x x x x x x x x x x PO REDUCERS 1 PO x PO PO x FE FE x PO W (S.) W (S.) 6 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x W PO x FNGE DPER W (S.) PO SM END E (SE) REDUCER 1 W (S.) 6 x x x x x Page 35

6 1 PO CPS & PUGS (SOID OR PPED) MX. P CPS W (S.) PUGS hreads in ccordance with NSI/SME PO x SWIVE YDRN EES 1 W (S.) 6 x x x x x x x PO GSKES C C PO RNSIION GSKES C C Page 36

7 Standard Push-On oint Gaskets (SR, NR, EPDM, Neoprene, FKM) NSI/WW C111/21.11 GSKE GENER SPECIFICIONS Star Pipe Products Push-On Gasket dimensions conform to the requirements for rim yton style bells. Gasket markings include size, Manufacturer s mark, Country of origin and product identification. No markings are positioned on sealing surfaces per the NSI/WW C111/21.11 standard. Push-on ransition gaskets follow the requirements of NSI/WW C111/21.11 where applicable. Standard gasket material is vulcanized styrene butadiene rubber (SR). Special application elastomers (EPDM, Nitrile, Neoprene & FKM) are available and shall be identified on all documentation and corresponding gaskets. Star Pipe gaskets are manufactured under quality control standards and procedures that are maintained by the gasket supplier. ppropriate documentation is maintained by the manufacturer and available for review upon request. Star Pipe gasket suppliers maintain a quality assurance program and manual that is reviewed and updated on an ongoing basis to ensure product quality. Star Pipe gasket suppliers perform in house testing and submit to random testing by Underwriters aboratories, Inc. Star Pipe gasket providers are recognized under the component program (U 194/ U 157) of Underwriters aboratories, Inc. Star Pipe provides that our Push-On gaskets for potable or wastewater projects will perform as designed, based on the published chemical and environmental resistance data for "generic" rubber compounds. Star Pipe should be consulted for specific recommendations or for unusual applications. GSKE PROPERIES PROPERY SM ES MEOD MIN ODY EE ardness, Shore "" D ±5 83±5 Minimum ensile D PSI 1200 PSI Minimum Elongation D % 125% Minimum ging D573 60% --- Maximum Compression Set D395, Method 20% --- Resistance to Surface Ozone Cracking D1149 No Cracking --- GSKE YPE SR (Styrene utadiene Rubber/ una-s) MXIMUM CONINUOUS EMP 150 F SNDRD USGE Drinking Water, Salt Water, Sanitary Sewage, Reclaimed Water, Raw Water, Storm Water. Not Recommended for ydrocarbon Service EPDM (Ethylene Propylene) 212 F lcohols, Dilute cids, Dilute alkalis, Ketones (MEK/cetone), Strong Oxidizing Chemicals; Drinking Water, Salt Water, Sanitary Sewage, Reclaimed Water, Raw Water, Storm Water. Not Recommended for ydrocarbon Service Neoprene (Polychlorprene / CR) 200 F ydrocarbons, Unrefined Petroleum Products, Greasy Waste; Salt Water, Sanitary Sewage, Reclaimed Water, Raw Water, Storm Water. Nitrile (NR / una-n) 150 F Refined Oils and Fluids, Fats, Greases and Waste; Drinking water, Sanitary Sewage, Reclaimed Water, Raw Water, Storm Water. FKM (Flouroelastomer / Viton ) 212 F romatic ydrocarbons, Chlorinated ydrocarbons, Vegetable Oils, most Chemicals; Drinking Water, Reclaimed Water, Raw Water, Storm Water. rim yton is a registered trademark of United States Pipe and Foundry Company. Viton is a registered trademark of E.I. Du Pont De Nemours & Company. Page 37

8 NOES: Page 38