QUAIL TOOLS A PARKER DRILLING COMPANY 5-7/8'', 34.21#,.625'', Z140, TF-M575

Transcription

1 QUAIL TOOLS A PARKER DRILLING COMPANY Operations New Iberia, LA Ph. (337) Victoria, TX Ph. (361) Odessa, TX Ph. (432) Evanston, WY Ph. (37) Texarkana, TX Ph. (93) Williston, ND Ph. (71) Morgantown, WV Ph. (34) Enid, OK Ph. (58) Sales Offices Houston, TX Ph. (281) New Orleans. LA Ph. (54) Denver, CO Ph. (33) Dallas, TX Ph. (972) San Antonio, TX Ph. (21) Pittsburgh, PA Ph. (724) Landing String Specification Sheet 5-7/8'', 34.21#,.625'', Z14, TF-M575 R3 Tube / Pipe Body Tube OD: Inches Tube ID: Inches Nominal Weight: lbs/ft Adjusted Weight (Includes TJs): 4.43 lbs/ft Grade Z14 Tube Wall (nominal):.625 Inches API Class - Tube: 95% RBW.594'' Tube Tensile: 1,362,85 lbs Tube Torsional: 155,68 ft-lbs Tube Collapse: 25,68 psi Tube Internal Yield/Burst: 28,298 psi Displacement Est. (Includes TJs):.147 bbls/ft Capacity Est. (Includes TJs):.198 bbls/ft Type: TF-M575 OD: 7. Inches ID 4. Inches Drift: Inches Maximum MUT : 63,2 ft-lbs Minimum MUT: 52,6 ft-lbs Torsional: 118,5 ft-lbs Torsional: 1,594,3 lbs KL 1/13/16 Providing Quality Rental Tools and Service Since 1978 The following items are registered trademarks of NOV Grant Prideco: HI TORQUE (HT), XT, XT-M, TT, TT-M, TF-M, GT-M, GPDS, SLIP-PROOF, XD15, Z14, V15. The technical information herein is for reference only & should not be construed as a recommendation. The user should consider all field conditions along with other combined factors which may affect the final string design used in the field. Combined loads, slip crushing, elevator hoisting capacity, ID Coatings, and Hardbands are not considered in these figures. Capacity/Displacement and adjusted weight figures are based on pipe purchased at above standard RBW and with longer than standard tool joints. All dimensions are nominal. Figures are subject to change without notice. Please refer to our website for updates:

2 Phone: +1 (281) Drill Pipe Configuration Pipe Body OD Pipe Body Wall Thickness Pipe Body Grade Drill Pipe Length Tool Joint OD Tool Joint ID Pin Tong Box Tong Drill Pipe Performance Maximum MUT Minimum MUT Z-14 Controlled Length TurboFrac-M Performance of Drill Pipe with Pipe Body at 95 % Inspection Class Applied Make-up Torque 63,2 52,6 Maximum Make-up Torque 63,2 Minimum Make-up Torque 52,6 95 % Inspection Class Nominal Weight Designation Drill Pipe Approximate Length (ft) 45. SmoothEdge Height 1/8 Raised Tool Joint SMYS (psi) 135, Upset Type IEU Max Upset OD (DTE) 6. Friction Factor 1. Note: Tong space may include hardfacing. Drill-Pipe Length Controlled Length Best Estimates (without Coating) (with Coating) Nominal (least accurate) Drill Pipe Adjusted Weight (lbs/ft) Operational Max Tension Torque (lbs) Fluid Displacement (gal/ft) Tension Only 1,362,8 Fluid Displacement (Bbls/ft) Combined Loading Fluid Capacity (gal/ft) 51,1 1,287, Fluid Capacity (Bbls/ft) Tension Only 1,325, Drift Size Combined Loading 4,2 1,316,6 Note: Oil field barrel equals 42 US gallons. Note: Drill pipe assembly values are best estimates and may vary due to pipe body mill tolerance, internal plastic coating, and other factors. Performance TurboFrac-M 575 ( 7. OD X 4. ID ) 135, Applied Make-up Tension at Shoulder Tension at Tool Joint Dimensions Tool Joint Torsional Strength Tool Joint Tensile Strength (lbs) Torque Note: To maximize connection operational tensile, a MUT (T4) = 63,3 should be applied. Elevator Shoulder Information 118,5 1,594,3 SmoothEdge Height 1/8 Raised Separation Yield (lbs) (lbs) 1,592, 1,594,3 1,325, 1,594,3 (psi) Balanced OD 7.93 Minimum Tool Joint OD for API Premium Class Minimum Tool Joint OD for Counterbore Internal Gas Pressure Rating (psi) = Envelope External Gas Pressure Rating (psi) = Envelope Elevator OD 1/8 Raised 7.25 Nominal Tool Joint Worn to Bevel Worn to Min TJ OD for OD Diameter API Premium Class , 845,4 828,8 Box OD Elevator Capacity (lbs) 1,31,1 Assumed Elevator Bore Diameter Note: Elevator capacity based on assumed Elevator Bore, no wear factor, and contact stress of 11,1psi. Note: A raised elevator OD increases elevator capacity without affecting make-up torque. Pipe Body Configuration ( OD.625 Wall Z-14 ) Pipe Body Slip Crushing Capacity Pipe Body Performance Slip Crushing Capacity Assumed Slip Length Transverse Load Factor (K) Nominal 95 % Inspection Class API Premium Class (lbs) 95,1 91,1 754, Note: Slip Crushing: Slip crushing load is calculated with the Spiri-Reinhold equation from Why Does Drill Pipe Fail in the Slip Area World Oil, 1959 for the slip length and transverse load factor shown and is for reference only. Slip crushing is dependent on the slip design and condition, coefficient of friction, loading conditions, time in slips, drill pipe OD and wall variation, and other factors. Consult with the slip manufacturer for additional information. Pipe Body Configuration ( OD.625 Wall Z-14 ) Nominal 95 % Inspection Class API Premium Class Pipe Tensile Strength (lbs) 1,443,2 1,362,8 1,127, Pipe Torsional Strength TJ/PipeBody Torsional Ratio 165, , ,7.93 8% Pipe Torsional Strength Burst 132,1 (psi) 26,64 124,4 28,298 12,2 23,83 Note: Nominal Burst calculated at 87.5% RBW Collapse (psi) 26,618 25,68 22,677 per API. Pipe OD Wall Thickness Nominal Pipe ID Cross Sectional Area of Pipe Body (in^2) Cross Sectional Area of OD (in^2) Cross Sectional Area of ID (in^2) Section Modulus (in^3) Polar Section Modulus (in^3) Note: The technical information contained herein, including the product performance sheet and other attached documents, is for reference only and should not be construed as a recommendation. The user is fully responsible for the accuracy and suitability of use of the technical information. NOV Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. Drill pipe assembly properties are calculated based on uniform OD and wall thickness. No safety factor is applied. The information provided for various inspection classes and for various wear conditions (remaining body wall) is for information only and does not represent or imply acceptable operating limits. It is the responsibility of the customer and the end user to determine the appropriate performance ratings, acceptable use of the product, maintain safe operational practices, and to apply a prudent safety factor suitable for the application. For API connections that have different pin and box ID s, tool joint ID refers to the pin ID. Per Chapter B, Section 4 VII of the IADC drilling manual, it is recommended that drilling torque should not exceed 8% of MUT. NOV GrantPrideco

3 Torque Tension Graph : TurboFrac-M 575 (7. OD X 4. ID) SMYS = 135, (psi) Pipe Body: 95% Inspection Class, OD,.625 wall thickness, Z 14 Pipe Grade (safety factor = 1.) Tension (lbs) 1,8, 1,6, 1,4, 1,2, 1,, 8, Pipe Body in Combined Loading Pipe Body Yield at 95% Inspection Class Premium Pipe Body Yield (8% Inspection Class) Performance (based on MUT) Tool Joint Yield Tool Joint Shoulder Separation TJ Operational Limit (Max MUT) TJ Operational Limit (Min MUT) 6, 4, 2, Torque (ft lbs)

4 Drill Pipe Operational Limits ( at Maximum MUT = 63,2 ) : TurboFrac-M 575 (7. OD X 4. ID) SMYS = 135, (psi) Pipe Body: 95% Inspection Class, OD,.625 wall thickness, Z 14 Pipe Grade 1,6, Overload Zone 1,4, 1,2, Tension (lbs) 1,, 8, 6, Operational limit (safety factor = 1.) 4, 2, Operational Torque (ft lbs)

5 Drill Pipe Operational Limits ( at Minimum MUT = 52,6 ) : TurboFrac-M 575 (7. OD X 4. ID) SMYS = 135, (psi) Pipe Body: 95% Inspection Class, OD,.625 wall thickness, Z 14 Pipe Grade 1,4, Overload Zone 1,2, 1,, Tension (lbs) 8, 6, Operational limit (safety factor = 1.) 4, 2, Operational Torque (ft lbs)

6 Operational Limits of Drill Pipe TurboFrac-M 575 Tool Joint OD 7. Tool Joint ID 4. Tool Joint Specified Minimum 135, Yield Strength (psi) Pipe Body 95 % Inspection Class Pipe Body OD Wall Thickness.625 Pipe Body Grade Z-14 Combined Loading for Drill Pipe at Combined Loading for Drill Pipe at Maximum Make-up Torque = 63,2 Minimum Make-up Torque = 52,6 Operational Torque 2,7 5,4 8,1 1,8 13,4 16,1 18,8 21,5 24,2 26,9 29,6 32,3 34,9 37,6 4,3 43, 45,7 48,4 51,1 Assembly Pipe Body Max Operationa Assembly Pipe Body Max Tension Tension l Torque Max Tension Max Tension Max Tension Max Tension (lbs) (lbs) (lbs) (lbs) (lbs) (lbs) 1,362,8 1,592, 1,325, 1,362,8 1,325, 1,362,6 1,592, 2,1 1,325, 1,362,7 1,325, 1,362, 1,592, 4,2 1,325, 1,362,4 1,325, 1,361, 1,592, 6,3 1,325, 1,361,7 1,325, 1,359,6 1,592, 8,5 1,325, 1,36,8 1,325, 1,357,8 1,592, 1,6 1,325, 1,359,7 1,325, 1,355,5 1,592, 12,7 1,325, 1,358,3 1,325, 1,352,9 1,592, 14,8 1,325, 1,356,7 1,325, 1,349,8 1,592, 16,9 1,325, 1,354,8 1,325, 1,346,2 1,592, 19, 1,325, 1,352,6 1,325, 1,342,3 1,592, 21,2 1,325, 1,35,1 1,325, 1,337,9 1,592, 23,3 1,325, 1,347,5 1,325, 1,333,1 1,592, 25,4 1,325, 1,344,5 1,325, 1,328,1 1,592, 27,5 1,325, 1,341,4 1,325, 1,322,4 1,592, 29,6 1,325, 1,337,9 1,325, 1,316,3 1,592, 31,7 1,325, 1,334,2 1,325, 1,39,7 1,592, 33,8 1,325, 1,33,3 1,325, 1,32,7 1,592, 36, 1,325, 1,325,8 1,325, 1,295,2 1,592, 38,1 1,321,3 1,321,3 1,325, 1,287,3 1,592, 4,2 1,316,6 1,316,6 1,325, 1,362,8 1,362,6 1,362, 1,361, 1,359,6 1,357,8 1,355,5 1,352,9 1,349,8 1,346,2 1,342,3 1,337,9 1,333,1 1,328,1 1,322,4 1,316,3 1,39,7 1,32,7 1,295,2 1,287,3 Operational drilling torque is limited by the Make-up Torque. Make-up Torque Range Operational drilling torque is limited by the Make-up Torque. Min MUT Max MUT Make-up Torque Max Tension 52,6 1,325, 53,8 1,355,2 55, 1,385,4 56,1 1,413,1 57,3 1,443,4 58,5 1,473,6 59,7 1,53,8 6,8 1,531,5 62, 1,561,8 63,2 1,592, (lbs) Note: Recommended MUT should always be used when possible. If not possible, MUT should be as close to Recommended MUT as possible. Note: The technical information contained herein, including the product performance sheet and other attached documents, is for reference only and should not be construed as a recommendation. The user is fully responsible for the accuracy and suitability of use of the technical information. NOV Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. Drill pipe assembly properties are calculated based on uniform OD and wall thickness. No safety factor is applied. The information provided for various inspection classes and for various wear conditions (remaining body wall) is for information only and does not represent or imply acceptable operating limits. It is the responsibility of the customer and the end user to determine the appropriate performance ratings, acceptable use of the product, maintain safe operational practices, and to apply a prudent safety factor suitable for the application. For API connections that have different pin and box ID s, tool joint ID refers to the pin ID. Per Chapter B, Section 4 VII of the IADC drilling manual, it is recommended that drilling torque should not exceed 8% of MUT. NOV GrantPrideco

7 14, Wear for TurboFrac M 575 (7. OD X 4. ID) Material SMYS (specified minimum yield strength) = 135, (psi) 12, 1, Torque (ft lbs) 8, 6, 4, Torsional Strength Maximum MUT Minimum MUT Pipe Body 8% of Premium Pipe Body Torsional Strength Pipe Body: OD,.625 wall thickness, Z 14 Pipe Grade 2, Tool Joint OD

8 Wear Table TurboFrac-M 575 Tool Joint OD Tool Joint Specified Minimum Tool Joint ID 135, Yield Strength (psi) Wear New OD Worn OD Tool Max Max Min MUT Max Tension Joint OD Torsional Tension MUT Strength (lbs) (lbs) 7 118,5 63,1 1,591,4 52,6 1,325, ,1 62,4 1,577,5 52, 1,313, ,8 61,7 1,563,7 51,5 1,34, ,4 61, 1,549,9 5,9 1,292, ,1 6,3 1,536,1 5,3 1,281, ,8 59,6 1,522,4 49,7 1,269, ,4 58,9 1,58,7 49,1 1,257, ,1 58,1 1,495, 48,5 1,245, ,8 57,4 1,481,3 47,9 1,234, ,5 56,7 1,467,6 47,3 1,222, ,2 56,1 1,454, 46,8 1,212, ,9 55,3 1,44, 46,2 1,21,1 Pipe Body Combined Loading Table (Torque-Tension) Pipe Body 95 % Inspection Class Pipe Body OD Wall Thickness.625 Pipe Body Grade Z-14 Pipe Body Torque Pipe Body Max Tension (lbs) 1,362,8 14,1 1,357,2 28,3 1,34,1 42,4 1,311,2 56,6 1,269,4 7,7 1,213,9 84,8 1,142,4 99, 1,51, 113,1 935,4 127,2 784,1 141,4 567,3 155,5 18,3 Note: The technical information contained herein, including the product performance sheet and other attached documents, is for reference only and should not be construed as a recommendation. The user is fully responsible for the accuracy and suitability of use of the technical information. NOV Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. Drill pipe assembly properties are calculated based on uniform OD and wall thickness. No safety factor is applied. The information provided for various inspection classes and for various wear conditions (remaining body wall) is for information only and does not represent or imply acceptable operating limits. It is the responsibility of the customer and the end user to determine the appropriate performance ratings, acceptable use of the product, maintain safe operational practices, and to apply a prudent safety factor suitable for the application. For API connections that have different pin and box ID s, tool joint ID refers to the pin ID. Per Chapter B, Section 4 VII of the IADC drilling manual, it is recommended that drilling torque should not exceed 8% of MUT. NOV GrantPrideco