PERFORATOR Oil and Gasfield Drill Pipes
|
|
- Madeline Fleming
- 6 years ago
- Views:
Transcription
1
2 PERFORATOR Oil and Gasfield Drill Pipes API approved Upsetted pipe in grade E, X, G + S Tool joint material acc. API 5DP Dimensions up to 5 1/2 pipe Hard banding acc. to ARNCO 100 XT, 150 XT, 300 XT Tuboscope TCS 8000, TCS Titanium Length: Range 1 3 Non-destructive testing 1 Ultrasonic test acc. EN 1714 and 1 Magnetic particle inspection acc. ASTM-E709 Destructive testing 1 Tensile test acc. DIN Bending test acc. API SPEC 5DP, latest edition 1 Charpy V-notch impact test acc. ASTM-A370 5DP Engineering 2. Pipes 3. Hardbanding 2 4. Friction Welding 5. Heat Treatment 6. Inspection
3 Contents Pages PERFORATOR Drill Pipe and Tool Joint Grades 4 Dimensions of Drill Pipe with Weld-On Tool Joints 5 PERFORATOR Drill Pipe: Dimensions and Performance Properties 6 27 Standard Practice for Marking Tool Joints and Drill Pipe 28 Internal Coating of Drill Pipe 29 Advantage of Internal Coating 30 Certificates 31 Rights of technical modification reserved. PERFORATOR is a registered trademark. 3
4 PERFORATOR Drill Pipe and Tool Joint Grades Drill Pipe Friction welded Tool Joints Internal Upset IU Numbered Connections NC External Upset EU Internal Flush IF Internal-External Upset IEU Full Hole FH acc. to API Spec. 5DP Additional requirements can be designed and supplied on request. DRILL PIPE AND TOOL JOINT GRADES Mechanical properties of API drill pipe grades Grade Yield strengh Tensile strengh Elongation¹ API psi psi psi in 2 inches N/mm² N/mm² N/mm² % min. min. min. min. E see Spec. 5DP footnote X Spec. 5DP G see Spec. 5DP S see Spec. 5DP Mechanical properties of API tool joint grades Yield strengh Tensile strengh Elongation Box API psi psi psi Hardness N/mm² N/mm² N/mm² Brinell min. max. min. min Spec. 5DP
5 Dimensions of Drill Pipe with Weld-On Tool Joints Optional with 90 shoulder on box 5
6 6 PERFORATOR Drill Pipe: Dimensions and Performance Properties
7 PERFORATOR Drill Pipe: Dimensions and Performance Properties 7
8 8 PERFORATOR Drill Pipe: Dimensions and Performance Properties
9 PERFORATOR Drill Pipe: Dimensions and Performance Properties 9
10 10 PERFORATOR Drill Pipe: Dimensions and Performance Properties
11 PERFORATOR Drill Pipe: Dimensions and Performance Properties 11
12 12 PERFORATOR Drill Pipe: Dimensions and Performance Properties
13 PERFORATOR Drill Pipe: Dimensions and Performance Properties 13
14 14 PERFORATOR Drill Pipe: Dimensions and Performance Properties
15 PERFORATOR Drill Pipe: Dimensions and Performance Properties 15
16 16 PERFORATOR Drill Pipe: Dimensions and Performance Properties
17 PERFORATOR Drill Pipe: Dimensions and Performance Properties 17
18 18 PERFORATOR Drill Pipe: Dimensions and Performance Properties
19 PERFORATOR Drill Pipe: Dimensions and Performance Properties 19
20 20 PERFORATOR Drill Pipe: Dimensions and Performance Properties
21 PERFORATOR Drill Pipe: Dimensions and Performance Properties 21
22 22 PERFORATOR Drill Pipe: Dimensions and Performance Properties
23 PERFORATOR Drill Pipe: Dimensions and Performance Properties 23
24 24 PERFORATOR Drill Pipe: Dimensions and Performance Properties
25 PERFORATOR Drill Pipe: Dimensions and Performance Properties 25
26 26 PERFORATOR Drill Pipe: Dimensions and Performance Properties
27 PERFORATOR Drill Pipe: Dimensions and Performance Properties 27
28 Standard Practice for Marking Tool Joints and Drill Pipe Drill Pipe Marking The following marks are applied as standard to the drill pipe body. Paint stenciling on Pipe Body. here UP for special upset dimensions if applicable here SR-Informations L2 or L3 (PSL-2 or PSL-3) if applicable welding area Drill Pipe Body manufacturer API license no. API Logo heat code no. Grade nominal weight (LB/FT) size month year welding area Tool Joint Marking The following marks are applied as standard to the tool joints. Die stamping on Pin and Box End. PERFORATOR Die stamping pin end PERFORATOR Die stamping box end 28 Other marking on request.
29 Internal Coating of Drill Pipe WE OFFER TOGETHER WITH TUBOSCOPE VETCO INTERNALY COATED DRILL PIPE The drilling fluids used today can be classified from non corrosive up to extremely corrosive. Since within the lifetime of a drill string, the utilization will be for all different enviroments, corrosion caused by aggressive muds has to be considered. 29
30 30 Advantage of Internal Coating
31 Certificates 31
32 DRILL PIPES DRILLING TOOLS INJECTION TECHNIQUE FOR MINING AND TUNNELLING PERFORATOR GmbH Bei dem Gerichte Walkenried Germany Fon +49 (0)5525 / Fax +49 (0)5525 / info@perforator.de Internet:
INTRODUCTION. Research and Development activities are continuous phenomena at OCTL aimed at upgradation of technology and manufacturing processes.
INTRODUCTION Oil Country Tubular Limited (OCTL), is one of the leading companies in the World processing a wide range of Oil Country Tubular Goods required for the Oil Drilling and Exploration Industry.
More informationOil Country Tubular Ltd. INDIA. ISO 9001 : 2015 Company
Oil Country Tubular Ltd. INDIA ISO 9001 : 2015 Company m Oil Country Tubular Ltd. ISO 9001 :2015 Company Manufacturer/ Processor of Oil Country Tubular Goods Drill Pipes/ Heavy Weight Drill Pipes/ Drill
More informationOptional Drill Pipe Products
Drill Pipe At RDT we understand our customer s need for durability and performance when choosing the drill pipe that they will use. Each joint of pipe we produce goes through our intense quality assurance
More informationAPI 5DP DRILL PIPE & API 7-1 HW DRILL PIPE
API DP DRILL PIPE & API -1 HW DRILL PIPE In 18, our journey into the business of repairing valves and industrial instrumentation began. That journey has led us to represent and service well known American
More informationDTH/ROTARY DRILL PIPE API DRILL PIPE ROTARY BLAST PIPE ROTARY & ROTARY PERCUSSIVE CASING
DTH/ROTARY DRILL PIPE API DRILL PIPE ROTARY BLAST PIPE ROTARY & ROTARY PERCUSSIVE CASING CHINA S MOST COMPREHENSIVE SUPPLIER OF HIGH-QUALITY DRILL PIPE No.1 in sales of DTH/Rotary Pipe for mining and water
More informationWho we are. API Facility: Spec 5DP Spec 5CT Spec 7-1 Q1 Spec
Who we are Established in 2006 to supply API drilling tubular tools Over 150 years of experience in tubular manufacturing Co-founders of two different Tubular Manufacturing Companies API Facility: Spec
More informationQUAIL TOOLS A PARKER DRILLING COMPANY 5-7/8'', 34.21#,.625'', Z140, TF-M575
QUAIL TOOLS A PARKER DRILLING COMPANY Operations New Iberia, LA Ph. (337) 365-8154 Victoria, TX Ph. (361) 579-244 Odessa, TX Ph. (432) 366-1491 Evanston, WY Ph. (37) 789-586 Texarkana, TX Ph. (93) 838-162
More informationLanding & Drill String CATALOG
Landing & Drill String CATALOG With international advanced technology, sophisticated equipment and excellent management, Enerserva manufacturing facility of landing string and drill string provides high
More informationSpecification for Pipe Fittings
Specification for Pipe Fittings Specification for Pipe Fittings Page 1 of 11 Table of Contents 1.0 SCOPE...3 2.0 DEFINITIONS...3 3.0 REFERENCES, CODES AND STANDARDS...3 4.0 CONTRACTOR'S RESPONSIBILITIES...4
More information(IN ACCORDANCE WITH ISO 10474/EN10204/DIN50049 "type 3.1") SHIPPERS NO. VEHICLE I.D SPECIFICATION AND GRADE O.D.: WALL: MIN: MAX:
UNITED STATES STEEL TUBULAR S TIME: 09:07:07 CERTIFIED REPORT VEHICLE I.D SPECIFICATION AND GRADE PIPE CARBON SMLS STD PIPE API 5L-*44TH ED DTD OCT 2007 AND ISO 3183:2007 MOD PSL-2 GRADE B AND GRADE X42
More informationSpecification for Drill Pipe
Specification for Drill Pipe API SPECIFICATION 5D FOURTH EDITION, AUGUST 1999 EFFECTIVE DATE: JANUARY 30, 2000 Specification for Drill Pipe Upstream Segment API SPECIFICATION 5D FOURTH EDITION, AUGUST
More informationAPI SC5 Ballot Submission Task Group on Drill Stem Elements
API SC5 Ballot Submission Task Group on Drill Stem Elements Work Item Number 7040 Title of Work Item Type of Distribution [Voting and Comment, Comment-only, Recirculation (comment resolution), Re-ballot]
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19890-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.11.2016 to 14.04.2020 Holder of certificate: Aktien-Gesellschaft
More informationCALVERT GROUP SEAMLESS PIPE
SEAMLESS PIPE INTRODUCTION In 1986 Calvert Group began manufacturing seamless carbon, alloy, stainless and duplex/super duplex pipe and fittings for the oil, gas, power industries and also gas/steam injection
More information(IN ACCORDANCE WITH ISO 10474/EN10204/DIN50049 "type 3.1") SHIPPERS NO. VEHICLE I.D SPECIFICATION AND GRADE O.D.: WALL: MIN: MAX:
UNITED STATES STEEL TUBULAR S TIME: 09:22:14 CERTIFIED REPORT SHIPPERS NO. VEHICLE I.D SPECIFICATION AND GRADE PIPE CARBON SMLS STD PIPE API 5L-*44TH ED DTD OCT 2007 AND ISO 3183:2007 MOD PSL-2 GRADE B
More informationANNEXURE-IA. Bid Security Amount : INR 5,00, OR USD 11, ( or equivalent Amount in any currency )
ANNEXURE-IA Tender No& Date : SDG 1982 P09 DATED 29.01.2009 Tender Fee : INR 4500.00 OR USD 100.00 Bid Security Amount : INR 5,00,000.00 OR USD 11,000.00 ( or equivalent Amount in any currency ) Bidding
More informationOIL INDIA LIMITED ( A Govt of India Enterprise) P.O. Duliajan , Assam Fax No ;
OIL INDIA LIMITED ( A Govt of India Enterprise) P.O. Duliajan 786602, Assam Fax No. 91-374-2800533;E-mail: mmfs1@oilindia.in Tender No& Date : SDG8804L11/L1 DATED 22.07.2010 Bid Security Amount : Not Applicable
More informationTianjin Nolite Steel Co.,Ltd Page 1 of 10. Tianjin Nolite Steel Co.,Ltd
Tianjin Nolite Steel Co.,Ltd. - 1 -Page 1 of 10 Tianjin Nolite Steel Co.,Ltd. - 1 - About Us Tianjin Nolite Steel Co.,Ltd. - 2 -Page 2 of 10 We,Tianjin Nolite Steel Group is as a large investment group,
More informationInterpipe steel pipe producer Interpipe global producer focused on oil and gas industry. Interpipe global producer focused on oil and gas industry
Interpipe steel pipe producer Interpipe global producer focused on oil and gas industry Page 1 Interpipe committed to safety Interpipe key priority: health, safety and well-being of its employees in all
More informationDiaphragm seal with threaded connection Threaded design Model
Pressure Diaphragm seal with threaded connection Threaded design Model 990.10 WIKA data sheet DS 99.01 for further approvals see page 6 Applications For aggressive, hot, corrosive, environmentally hazardous
More informationSucker Rods & Couplings
Sucker Rods & Couplings About Us Q2 Artificial Lift Services opened in December 2016 in Red Deer, Alberta, Canada. Our Senior Management team has an average of 20+ years working in the oilfield business.
More informationTechnology that works for you.
Technology that works for you. WATER WELL & MINERAL EXPLORATION Drilling accessories designed for use in Water Well and Mineral Exploration are illustrated in this brochure and are manufactured to the
More informationASTM A420-Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
ASTM A420-Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service 1. Scope 1.1 This specification 2 covers wrought carbon steel and alloy steel fittings
More informationDrill Pipe HWDP Drill Collar Accessories OCTG
Drill Pipe HWDP Drill Collar Accessories OCTG Jiangsu Rontech Petroleum Technology Incorporated Company Add:No21 East Xinyan Road,Shizhuang,Jiangyin,China Tel:+86 510 86660888 Fax:+86 510 86665666 Website:www.rontech.com.cn
More informationCompatibility Testing of Postle Duraband NC over Arnco 100XT TM
Postle Industries, Inc. Cleveland, OH Compatibility Testing of Postle Duraband NC over Arnco 100XT TM THHA E4-19994 July 31, 2014 Srinivasa R. Koneti, BSME & MSMSE Materials Engineering Manager Disclaimer
More information- Stainless Steel. - Titanium. Your Partner for
- Alloy steel - Stainless Steel - Nickel and Nickel Alloys - Titanium Your Partner for Piping Systems TPS-Technitube Röhrenwerke GmbH a privat owned company with head office, production and stock in Daun
More informationXI'AN LINKUN STEEL PIPE CO., LTD
Designation: A 50 0 (Reapproved 2005) Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing This standard is issued under the fixed designation A 50; the number immediately
More informationISO INTERNATIONAL STANDARD. Petroleum and natural gas industries Drilling and well-servicing equipment
INTERNATIONAL STANDARD ISO 14693 First edition 2003-12-15 Petroleum and natural gas industries Drilling and well-servicing equipment Industries du pétrole et du gaz naturel Équipement de forage et d'entretien
More informationSPECIFICATION FOR PRESSURE VESSEL PLATES, CARBON STEEL, FOR MODERATE- AND LOWER-TEMPERATURE SERVICE
Technical Literature: ASME SA-516 [ASTM A516] Company Website: www.metalspiping.com SA-516/SA-516M Carbon & Low Alloy Steels From Hebei Metals Industrial Limited SPECIFICATION FOR PRESSURE VESSEL PLATES,
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18478-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 01.09.2014 to 31.01.2018 Holder of certificate: MT
More informationSSAB water mains. A reliable and economically advantageous solution for water supply.
SSAB water mains A reliable and economically advantageous solution for water supply www.ssab.com/infra SSAB S SYSTEM OF WATER MAINS DISTRIBUTES CLEAN WATER SAFELY A system made up of steel water mains
More information5505L FLANGE BOLT DISCS
MECHANICAL PACKING INSTALLATION INSTRUCTIONS 0L FLANGE BOLT DISCS PREPARATION Ensure stud threads are long enough to allow nuts to make contact with metal faces. Precaution: Good bolting practice requires
More informationW-18 Steel Forgings for Continuous Grain-Flow Integrated Crankshafts
Guideline No. W-18 (201705) W-18 Steel Forgings for Continuous Grain-Flow Integrated Crankshafts Issued date: May 9, 2017 China Classification Society Foreword This Guideline is a part of CCS Rules, which
More informationCorporation SEAMLESS PIPE
Corporation SEAMLESS PIPE Pipe Applicable Standards ASTM Pipe Code Designations A 106/A 106M Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service A 312/A 312M Standard Specification
More informationHOT-ROLLED COIL. Contents. 1. Company Profile 2
HOT-ROLLED COIL Contents 1. Company Profile 2 2. Integrated Steel Mill Instruction 4 3. Typical Specification 5 3.1 Chemical Compositions & Mechanical Properties 5 3.2 Tolerances 11 4. Available Manufacturing
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15590-3 First edition 2004-11-01 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 3: Flanges Industries du
More informationMaritime Rules Part 41: Anchors and Chain Cables
Maritime Rules Part 41: Anchors and Chain Cables ISBN 978-0-478-44746-0 Published by Maritime New Zealand, PO Box 25620, Wellington 6146, New Zealand Maritime New Zealand Copyright 2015 Part 41: Anchors
More informationIMPACT. Chemical composition For the chemical composition of the ladle analysis the following limits are applicable (in %):
IMPACT Wear resistant steel Material data sheet, edition April 2016 1 DILLIDUR IMPACT is a wear resistant steel with a nominal hardness of 340 HBW in delivery condition. DILLIDUR IMPACT is not a constructional
More information陕西锐际机械设备有限公司. Shaanxi FYPE Rigid Machinery CO., LTD Company Profile. Products Range: Drilling Rigs. China. and so on.
Company Profile Shaanxi FYPE Rigid Machinery Co., LTd was located in Xi'an,in the very heart of China. Our company are dealing with manufacturing, sourcing equipments for oil & gas industry and providing
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 13535 First edition 2000-12-15 Petroleum and natural gas industries Drilling and production equipment Hoisting equipment Industries du pétrole et du gaz naturel Équipements de
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15590-2 First edition 2003-12-15 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 2: Fittings Industries du
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10407-2 First edition 2008-10-15 Petroleum and natural gas industries Rotary drilling equipment Part 2: Inspection and classification of used drill stem elements Industries du
More informationGas Industry Standard
Gas Industry Standard GIS/L2:2006 Specification for Steel pipe 21.3 mm to 1 219 mm outside diameter for operating pressures up to 7 bar (supplementary to BS EN 10208-1) Contents Foreword Mandatory and
More informationSPECIFICATION FOR PRESSURE VESSEL PLATES, ALLOY STEEL, QUENCHED AND TEMPERED 8 AND 9% NICKEL
Technical Literature: ASTM A553 [ASME SA-553] Company Website: www.metalspiping.com You Reliable Supplier of Ferrous & Non-Ferrous Piping Materials SPECIFICATION FOR PRESSURE VESSEL PLATES, ALLOY STEEL,
More informationDimensions / Order Codes
Cushion Clamp Series Dimensions / Order Codes Clamp Assembly Types STC / SPC (for Use with Channel Rail SCS) G Design Load 1 D C ØD1 E B* Design Load 3 (Maximum Load in Pipe Direction) Design Load 2 Outside
More informationINFO SERVICE CHANGES IN THE STANDARD EN /4
INFO SERVICE CHANGES IN THE STANDARD EN 10253-2/4 en Introduction 4 General Information 5 Terms 7 Comparison pren 10253-2/4:2017 to EN10253-2:2007 / EN10253-4:2008 8 27 Information to be supplied by the
More informationTuboscope Coevorden One-Stop Full-Service Facility for all your Oilfield Tubular Needs
Tuboscope Coevorden One-Stop Full-Service Facility for all your Oilfield Tubular Needs 75 For more than years, NOV Tuboscope has continued to raise the global standard with a comprehensive and integrated
More informationGUJARAT NARMADA VALLEY FERTILIZERS & CHEMICALS LIMITED
CONTENTS 1. Scope 2. Referenced Documents 3. Abbreviations 4. Materials and Manufacture 5. Dimensions 6. Inspections and Tests 7. Markings 8. Preparation for Shipment - 1 - 1. Scope 1.1 This specification
More informationPORON VXT Vibration Isolation Materials
PORON VXT Vibration Isolation Materials Key Benefits and Features Vibration Isolation Efficiency - The lowest natural frequency of any PORON polyurethane for optimized results Long Term Durability - High
More informationExceptional Strength Properties
PREMIUM UPSET TUBING With a continued focus on customer satisfaction through innovative products and services, RDT Inc. is proud to announce the introduction of our newest product line, Premium Upset Tubing.
More informationDate of Issue: August 2017 Affected Publication: API Specification 16A, Specification for Drill-through Equipment, Fourth Edition, April 2017
Date of Issue: August 2017 Affected Publication: API Specification 16A, Specification for Drill-through Equipment, Fourth Edition, April 2017 Errata 1 Section 4.3.4.2, Table 8: The left-most cell in the
More informationSelect the basic design of your clamp assembly. A58.
Select the basic design of your clamp assembly. A58 A59 Material Code PP PA SA Basic Material Copolymeric Polypropylene Polyamide Aluminium AlSi12 Thermoplastic Elastomer Standard Colour Green Black Natural
More informationRA17-4 stainless. Introduction
RA17-4 stainless Introduction RA17-4 is an age-hardening martensitic alloy combining high strength with the corrosion resistance of stainless steel. Hardening is achieved by a short-time, simple lowtemperature
More informationCoiled Tubing for Downhole Applications
Coiled Tubing for Downhole Applications Tenaris Tubular technologies. Innovative services. Tenaris is the leading global manufacturer and supplier of tubular products and services used in the drilling,
More informationMonolithic Isolation Fittings
Monolithic Isolation Fittings The Industry s Dual O Ring Seal Standard Tests Include: 100% Hydrostatic Pressure & Electrical Tests 100% Ultrasonic of Welds 100% Magnetic Particle of Welds 100% Dye Penetrant
More informationMETALLIC MATERIAL SPECIFICATION
1. Scope: Page: 1 of 5 1.1. This specification shall be utilized in procurement of AISI 8630 modified steel (UNS G86300) in quenched and tempered condition to 22 HRc maximum hardness. 1.2. These materials
More informationPressure Control Supplier Quality Requirements Raw Materials Forgings and Wrought Forms SQ-12 Rev: 1.1
Approved By: Jerry Longmire Vice President - Quality Jim Harris Quality Leader - NAM Document Revision Chart The following chart lists the revisions made to this document tracked by version. Use this to
More informationCompetence centre for pipes. Steel pipes, precision steel pipes and structural hollow sections for steel construction.
Competence centre for pipes. Steel pipes, precision steel pipes and structural hollow sections for steel construction. Precision pipes in the highest quality Interfer Rohrunion and Interfer Präzisrohr
More informationTMK HYDRA ART INSIDE SKIVED AND ROLLER BURNISHED COLD FINISHED SEAMLESS STEEL TUBES and PISTON RODS TUBES FOR HYDRAULIC CYLINDERS
TMK HYDRA ART INSIDE SKIVED AND ROLLER BURNISHED COLD FINISHED SEAMLESS STEEL TUBES and PISTON RODS TUBES FOR HYDRAULIC CYLINDERS TMK is one of the world s leading producers of tubular products for the
More informationMolybdenum. Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium- Designation: A 387/A 387M 03
Designation: A 387/A 387M 03 Used in USDOE-NE Standards Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium- Molybdenum 1 This standard is issued under the fixed designation A 387/A
More informationSEAMLESS STEEL PIPE FLOW CHART
Seamless steel pipe is a long steel material with hollow section but without joint line. There are two kinds: cold-drawn and hot rolled. It is mostly used in transportation of oil, natural gas, coal gas,
More informationOCTG & Accessories. thickness
Tubing: OCTG & Accessories The tubing, are special pipes developed for oil (gas, water) wells and fields, is used to export and transmit the oil (gas, water) from such oil (gas, water) wells to the outside.
More informationAPI 5L Carbon Steel ERW Pipes & Tubes
------------------------------------------------------------------------------ API 5L Carbon Steel ERW Pipes & Tubes Web: www.rexaltubes.com ------------------------------------------------------------------------------
More informationIntroduction. High Performance, Streamline Connections for 4 in. Drill Pipe
Advanced Drill Pipe With Streamline Connections Enhances Slim-hole Drilling Performance Michael J. Jellison, Grant Prideco; Guillaume Plessis, Grant Prideco; Andre Glowacz, Total; John M. Pasnak, Saudi
More informationDrill Pipe Combined Torsion-Tension To Yield Pipe Tubes
Drill Pipe Combined Torsion-Tension To Yield Pipe Tubes The charts that follow indicate the minimum torsional yield strength of the pipe body tube under tension. Locate the appropriate figure for the pipe
More informationT Z M r o d ( f u l l y w o r k e d ) PS- I H R 1 0 1
Scope: PLANSEE SE Controlled document acc. to QR-04; this does not apply to hard copies 1. Dimensions and s 1.1 and guaranteed production s ground 0.50-0.99 ± 0.007 1.00-1.99 ± 0.010 2.00-2.99 ± 0.015
More informationDiaphragm seal with flange connection With internal diaphragm Model
Diaphragm seals Diaphragm seal with flange connection With internal diaphragm Model 990.26 WIKA data sheet DS 99.26 for further approvals see page 7 Applications Aggressive, highly viscous, crystallising
More informationHot-rolled tubes from Zeithain
Hot-rolled tubes from Zeithain Mannesmann Precision Tubes Netherlands Germany Mexico Head office Sales Production sites France Content Mannesmann Precision Tubes 3 Mannesmann tubes from Saxony 4 Finished
More informationOSNA -10 Copper-Nickel Sheathing on Boatlandings
OSNA -10 Copper-Nickel Sheathing on Boatlandings KME Germany GmbH & Co. KG Copper-Nickel-Sheathing on Boatlandings [GB] 1 Copper-nickel sheathing on offshore structures the most cost-effective, long-term
More informationInvitation for Bids (IFB) Cairo/Egypt Project: South Helwan Project Savings
Invitation for Bids (IFB) Cairo/Egypt Project: South Helwan Project Savings ICB No: GASCO/ICB/006 LOT 1: Steel Plates & Related Services. LOT 2: Piping Bulk Materials & Related Services. LOT 3: Pigs, Pig
More informationpartner-manufacturer in Central Asia
Your reliable partner-manufacturer in Central Asia COMPANY ESTABLISHMENT Machinery building plant Byelkamit LLP is the Kazakhstani commodity manufacturer. Established in 1995 within the framework of inter
More informationOSNA -10 Copper-Nickel Sheathing on Boatlandings
KME Germany GmbH & Co. KG Copper-Nickel-Sheathing on Boatlandings [GB] OSNA -10 Copper-Nickel Sheathing on Boatlandings Copper-nickel sheathing on offshore structures the most cost-effective, long-term
More informationStandard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
SA-790/SA-790M ASME BPVC.II.A-2015 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe 1. Scope 1.1 This specification covers seamless and straight-seam welded ferritic/austenitic
More informationINDRAPRASTHA GAS LIMITED. (IGL) CITY GAS DISTRIBUTION PROJECT IN NCT OF DELHI & NCR
(2 to 18 SIZE) INDRAPRASTHA GAS LIMITED. (IGL) CITY GAS DISTRIBUTION PROJECT IN NCT OF DELHI & NCR PARTICULAR TECHNICAL SPECIFICATION T PIPELINE VALVES (2 to 18 SIZE) A 06.12.2016 Issued as Standard Specification
More informationWELD TESTING DESTRUCTIVE AND NON-DESTRUCTIVE
WELD TESTING DESTRUCTIVE AND NON-DESTRUCTIVE DESTRUCTIVE TESTING These can be divided into two parts, Tests capable of being performed in the workshop. Laboratory tests. microscopicmacroscopic, chemical
More informationSUPPLIER QUALITY ASSURANCE REQUIREMENTS (SQAR)
The following supplier quality assurance requirements, referenced by number on the Purchase Order, are an integral part of each order placed by or Groth Continental Manufacturing Private Limited. Compliance
More informationSeamless. Structural Mechanical Pipe Brochure
Seamless Structural Mechanical Pipe Brochure General Size Chart Mill OD mm WT mm Max Lengths m Ostrava 21.3-273 2.3-25 12,5 Roman 168.3-508 6.3-50 12,8 OD/ WT mm 2,3 2,6 2,9 3,2 3,6 4 4,5 5 5,6 6,3 7,1
More informationSECTION STRUCTURAL STEEL
SECTION 051200 STRUCTURAL STEEL PART 1 GENERAL 1.01 SECTION INCLUDES A. Structural steel framing members and support members. B. Base plates, shear stud connectors. C. Grouting under base plates. 1.02
More informationHigh strength fine grained structural steel. Quenched and tempered. Product description. 890 a product brand of Dillinger 1/6
890 High strength fine grained structural steel Quenched and tempered Material data sheet, edition April 2016 1 DILLIMAX 890 is a high strength quenched and tempered, fine grained structural steel with
More informationHigh strength fine grained structural steel. Quenched and tempered. Product description. 965 a product brand of Dillinger 1/6
965 High strength fine grained structural steel Quenched and tempered Material data sheet, edition April 2016 1 DILLIMAX 965 is a high strength quenched and tempered, fine grained structural steel with
More informationW-09 ANCHOR CHAIN CABLES AND ACCESSORIES FOR SHIPS
Guideline No.: W-09(201510) W-09 ANCHOR CHAIN CABLES AND ACCESSORIES FOR SHIPS Issued date: October 20,2015 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical
More informationSPECIFICATION FOR PIPE BENDS FLOWLINE BUNDLE
SPECIFICATION FOR PIPE BENDS FLOWLINE BUNDLE TABLE OF CONTENTS 1. SCOPE...2 2. DEFINITIONS...2 3. REFERENCES...2 4. MANUFACTURER'S RESPONSIBILITIES...3 5. GENERAL SPECIFICATIONS...4 6. MANUFACTURING AND
More informationStandard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels 1
Designation: A 372/A 372M 03 An American National Standard Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels 1 This standard is issued under the fixed designation
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8535-1 Fourth edition 2006-08-01 Diesel engines Steel tubes for highpressure fuel injection pipes Part 1: Requirements for seamless cold-drawn single-wall tubes Moteurs diesels
More informationComparison of BS and BS EN for steel materials
Comparison of BS and BS EN for steel materials Appendix This table only highlights the comparison of BS and BS EN on steel materials, which are relevant to plan approval. Title of BS BS BS EN Title of
More informationHOW INNOVATION TAKES FORM
HOW INNOVATION TAKES FORM COLD FORMED ERW Open Sections Custom Shapes Informative Brochure 4 Steel Pipes 8 Steel Profiles 10 Steel Grades Water and Gas Pipes, Industrial Pipes, Drilling Pipes, Exhaust
More informationProcess Inline Filter, Change-Over
Process Inline Filter, Change-Over -503-130x -520x 1. TECHNICAL SPECIFICATIONS 1.1 GENERAL Inline filters, types PRFL and duplex inline filters are designed for process engineering and chemical plants.
More information# Core Competency Description. Revision: February 19, 2010 Page 1
Supplier: Date Completed: Supplier Contact: Completed By: VCR Sections: I. Core Competencies II. Engineering Capabilities III. Measuring IV. Manufacturing Technologies/Capabilities V. Gaging and Testing
More informationSTEEl SCREEnS AnD CASinGS
STEEl SCREEnS AnD CASinGS STÜWA Konrad Stükerjürgen GmbH ConTEnTS Bridge Slotted Screens Wire Wrapped Screens Accessories Installation Tools BRiDGE SloTTED SCREEnS/CASinGS bridge slotted screens and CasinGs
More informationSUPPLIER QUALITY SCOPE AND FACILITY QUESTIONNAIRE. Bantrel Co. Project #:
Bantrel Co. Project #: COMPLETED BY: DATE: SUPPLIER NAME: D & B NUMBER: CONTENTS 1.0 GENERAL INFORMATION 2.0 PERSONNEL 3.0 QUALITY PROGRAM 4.0 SUPPLIER / CONTRACTOR INFORMATION 5.0 SCOPE OF FABRICATION
More informationOSNA -10 Copper-Nickel Sheathing on Offshore Structures
KME Germany GmbH & Co. KG Copper-Nickel-Sheathing [GB] OSNA -10 Copper-Nickel Sheathing on Offshore Structures Photo: Centrica Energy Copper-nickel sheathing on offshore structures the most cost-effective,
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Eden House Watling Street Industrial Estate Leadgate Consett County Durham DH8 6TA Contact: Mr R L Hannant Tel: +44 (0)1207 599260 Fax: +44
More informationMATERIAL AND EQUIPMENT STANDARD FOR LARGE WELDED LOW PRESSURE STORAGE TANKS ORIGINAL EDITION MAY 1993
MATERIAL AND EQUIPMENT STANDARD FOR LARGE WELDED LOW PRESSURE STORAGE TANKS ORIGINAL EDITION MAY 1993 This standard specification is reviewed and updated by the relevant technical committee on Dec. 1998.
More informationFPD190 Differential pressure restriction orifice plates
Data sheet DS/FPD190 EN FPD190 Differential pressure restriction orifice plates Limits the flowrate or reduces the pressure of liquids, gases and steam Measurement made easy Orifice plate for flow restriction
More informationEAM :2003/05 Revision 01 21/10/2016
European Approval for Materials Data Sheet EAM-0879-02 This data sheet has been raised in accordance with the requirements of Article 15 of the Pressure Equipment Directive 2014/68/EU. The material described
More informationISO INTERNATIONAL STANDARD. Petroleum and natural gas industries Drilling and production equipment Drillthrough
INTERNATIONAL STANDARD ISO 13533 First edition 2001-12-01 Petroleum and natural gas industries Drilling and production equipment Drillthrough equipment Industries du pétrole et du gas naturel Équipements
More informationM o l yb d e n u m rod ( f u l l y w o r k e d ) PS- I H R 1 0 0
Scope: PLANSEE SE Controlled document acc. to QR-04; this does not apply to hard copies This specification defines fully worked molybdenum rods, produced in a diameter range of 0.5-140 mm (special size
More informationMATERIAL SPECIFICATION FOR SMOOTH WALLED STEEL PIPE
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 1802 NOVEMBER 2004 MATERIAL SPECIFICATION FOR SMOOTH WALLED STEEL PIPE TABLE OF CONTENTS 1802.01 SCOPE 1802.02 REFERENCES 1802.03 DEFINITIONS - Not
More informationSUPPLIER QUALITY ASSURANCE REQUIREMENTS
The following supplier quality assurance requirements, referenced by number on the Purchase Order, are an integral part of each order placed by Groth Corporation or Groth Continental Manufacturing Private
More informationSOUTHERN PIPE. Fire Sprinkler Pipe. Pre-painted. Reliability & Quality
SOUTHERN PIPE Pre-painted Fire Sprinkler Pipe Reliability & Quality At the forefront of the Steel Industry Head Office (Butterworth Plant) A member of the Southern Steel Group of companies, a leading steel
More information