Veka Evolutions Commercial Window Program

Transcription

1

2 interior/exterior accessory grooves aluminum reinforcement galvanized steel reinforcement Veka Evolutions Commercial Window Program VEKA Inc. is proud to introduce the Evolutions line of commercially rated PVC hung and sliding windows. These products, including a Single Hung, Single Slider, Double Hung, Double Slider and Picture window, have all passed the requirements for CW classification under the new 2008 North American Fenestration Standard/ Specification for windows, doors and skylights AAMA/ WDMA/CSA 101/I.S.2/A Today s commercial window markets are under going significant change, both from a structural and thermal requirements perspective. No longer is the status quo acceptable for commercial window and door specifiers. Architects are analyzing the efficiency of entire building envelopes and insisting on new standards for structural and thermal performance on commercial products. 1-3/8 glazing pocket aluminum reinforcement VEKA understands that field mulling, or in-house mulling of commercial windows is critical to the long term successful performance of a commercial product. We encourage the use of existing aluminum mulling profiles (thermally broken H mull or 3 piece mull) in conjunction with the Evolutions system. The evolutions frame is 3-1/4 in depth which matches most aluminum window frame configurations. VEKA also offers a Structural Mull which has been tested for, and passed, all requirements for the Florida Building Code (recognized as one of the more stringent code bodies in the US). This mull is anchored to the rough opening at the sill and head and then joined to a structural aluminum extrusion that ties the commercial PVC windows together.

3 Traditional Aluminum Flat Panning Aluminum Decorative Panning VEKA structural mull tested to FBC Thermally broken H mull or 3 piece mull Evolutions picture window unit

4 Enhanced Thermal Performance All Evolutions products have undergone computer simulation testing in accordance with the National Fenestration Rating Council (NFRC) for U-Factor, Solar Heat Gain Coefficient, Visible Light Transmittance and Condensation Resistance. The Evolutions products are designed with a sash platform that allow for the use of Insulated Glass packages of up to 1-3/8. This allows the manufacturer to explore an incredible amount of glass options including triple glass applications and multiple Low E surface usages. Weather seals at sash and upstand Integral pull rail With the Evolutions sash design, each system can far exceed the minimum requirements for NFRC and Energy Star labeling in all climate zones throughout the USA. Even more important, is the ability of these products to be labeled as both CW (Commercially) rated as well as Energy Star compliance. Fusion welded frame and sash Evolutions Thermal Performance Evolutions Double Hung IG Type OA IG Emissivity Argon U Value Test Report Double 3/ %.28 ATI A Triple * 1-1/ %.22 ATI A *= Simulation on Triple glass based on fully reinforced unit / CW rating Evolutions Double Slider IG Type OA IG Emissivity Argon U Value Test Report Double 3/ %.28 ATI A Triple* 1-1/ %.20 ATI A *= Simulation on Triple glass based on reinforced unit / CW rating Evolutions Picture Window IG Type OA IG Emissivity Argon U Value Test Report Double 7/8 n/a n/a.44 ATI Triple* %.20 ATI glazing option with laminated glass and warm edge spacer system 1-1/4 glazing option with laminated glass and warm edge spacer system 1-3/8 glazing option with laminated glass and warm edge spacer system

5 PVC is a natural insulator PVC does not transmit heat easily through conduction. Even in the cold of winter, PVC window and door frames remain warm to the touch. They create a natural thermal barrier without the added cost of a thermal break. Galvanized steel reinforcing at interlock meeting rail Lift out sashes for easy cleaning PVC windows also utilize multi-chambered profiles in their designs. These chambers divide the spaces found within the window frames and sashes. By dividing the space inside, severe exterior temperatures and comfortable interior temperatures never come in direct contact. PVC windows have the advantage as the chambered profiles are surrounded by a natural insulating material. This means that PVC frame and sash designs are an added feature keeping the interior conditioned space comfortable and lowering heating and cooling bills. CONVECTION CURRENTS WITHIN A CHAMBERED PROFILE Heat Transfer Heat Transfer Heat Transfer Heat Transfer Buffer Zone Heat Transfer Cold Outside Air: 40 Warm Inside Air: 70 Cold Outside Air: 40 Warm Inside Air: 70 Cold Outside Air: 40 Warm Inside Air: 70 Evolutions sash using traditional Aluminum Historical Grid application maintaining 1 IG Unit

6 Sound Control STC/OITC Comfort can no longer only be defined as a measure of ambient temperature. With construction projects closer to major highways, and commercial renovations more prevalent than ever in highly populated urban areas, comfort is also being measured in terms of sound. STC and OITC testing is being specified by architects more than even. Whether renovating college dorms, hospitals, apartment building, or new construction projects abutting major highways, STC and OITC testing is being requested more frequently. By taking advantage of the large overall IG width, and incorporating laminated glass the Evolutions systems have undergone Sound Transmission loss testing in accordance with ASTM E 90 and achieved excellent results without the use or application of a secondary window attached to the inside or outside of the unit (as many STC rated products do). By utilizing the overall maximum glass width of the sash and using laminated glass we can maintain the aesthetics of the finished product and still achieve excellent performance results. Impact Ratings All Evolutions products have been Impact Tested in accordance with ASTM E 1886 and ASTM E 1996 Standards for design pressure with missile impacts corresponding to Missile Level D and Wind Zone 3. By using strategically placed reinforcement within the sash chambers along with utilizing specific hardware requirements, the Evolutions Window can now be used for impact markets along the eastern seaboard. Being able to produce an impact window on the same production line as your commercial product has huge cost benefits including labor, factory space and inventory North American Fenestration Standard/Specification for windows, doors and skylights AAMA/WDMA/CSA 101/I.S.2/A The new NAFS standard (published in 2008 and slowly becoming the specification of choice) is recognized in our industry as a game changer for many window manufacturers. In addition to the elimination of the C (Commercial) and HC (Heavy Commercial) classification in favor of a combined classification known as CW (Commercial Window), the standard also now requires a maximum deflection test for a CW classification that previously was only required for HC and AW products. The deflection test, more commonly referred to as L/175, represents a maximum deflection allowance on sash components that all CW rated windows must pass under load. This test is performed on the CW gateway size which measures 56 x 91 and may be repeated on down sized units for Optional Performance testing. This is a game changer because under previous specifications (NAFS-05, -97, and prior), no such deflection allowance was part of the requirements for a C (commercial) rated product. What this means is any PVC window manufacturer that currently label their window as a C (commercial) rated product based on NAFS specifications prior to 2008, may not be able to pass the more stringent CW (Commercial Window) requirements in the 2008 Specification because their residential based window designs will not support the reinforcements required to pass the new deflection requirement. The Veka Evolutions system, however is designed in such a manner, that it incorporates substantial sections of metal reinforcing within the Evolutions wider platform sash extrusions to guarantee success during structural testing (including deflections testing) for the CW rating.

7 Summary of Testing Reports Product AAMA Gateway Primary Product Air Infiltration Water Test Pressure Test Report # EVOLUTIONS Test Size Designator Single Hung 56 x 91 CW-PG CFM 7.52 psf B Optional Performance Class 54 x 76 CW-PG psf B Single Slider 71 x 62 CW-PG50.06 CFM 7.52 psf B Double Hung / Equal Glass 56 x 91 CW-PG CFM 7.52 psf B Optional Performance Class 54 x 76 CW-PG CFM psf B Double Hung / Unequal Glass 56 x 91 CW-PG CFM 6.90 psf B Optional Performance Class 50 x 76 CW-PG CFM 9.2 psf B Double Slider / Large Sash 71 x 62 *CW-PG 30 TBD TBD TBD 76 x 54 *CW-PG 50 TBD TBD TBD TM Performance Color Solutions by VEKA Woodgrain & Color Foils for Commercial Color Enhancement 03 - Natural Oak 05 - Hillside Oak 06 - Colonial Cherry 07 - Yellow Pine 08 - Cavalier Oak 31 - American Cherry 32 - American Maple Interior Woodgrains Interior/ Exterior Woodgrains 20 - Rojo Oak 21 - Golden Oak 23 - Walnut 25 - Mahogany 26 - Chestnut 16 - Clay 17 - Brown 28 - Bone 33 - White 34 - Cocoa 35 - Brushed Silver 36 - Hunter Green Interior/ Exterior Colors 37 - Garnet 38 - Bronze 47 - Sand 48 - Dark Sapphire Interior/ Exterior Colors For commercial applications you now have a choice in surface treatment for PVC profiles. Now you have the same selection of colors that today s higher end aluminum window manufacturer or architect is accustomed to. The Evolutions system is available with a warranted exterior foil that tests in accordance with AAMA (Voluntary Performance Requirements Test Procedures for Laminates Intended for Use on AAMA Certified Plastic Profiles). Veka currently provides 11 exterior colored laminates. The standard interior color of the Evolutions products are White or Beige, however, by using our laminate technology we can offer an array of interior woodgrain laminate finishes as well to complement any interior design requirement. Third party inspection agencies and internal testing and audits indicate that Pinnacle laminates are guaranteed to perform under some of the harshest climates and we guarantee it for a period of 10 years.

8 VEKA is a qualifying supplier for the achievegreen design management tool for projects using the Green Building Initiative VEKA Inc. 100 Veka Drive, Fombell, PA VEKA West Lear Blvd., Reno, NV VEKA South 107 Metrocrest Way, Terrell, TX VEKA INC. Copyright, 2012