CENTRIA The Coatings Authority

Size: px

Start display at page:

Download "CENTRIA The Coatings Authority"

Kory Preston
6 years ago
Views:

CENTRIA The Coatings Authority CENTRIA s Versacor Ultra Coating Systems are an innovative approach to metal coatings that offers a long-term sustainable building envelope solution and superior

Unlike most thin-film architectural coatings available, Versacor Ultra coatings provide a 3-mil-thick Versacor Ultra Barrier Coat Primer over the metal substrate and several top coat finish

2 CENTRIA The Coatings Authority CENTRIA s Versacor Ultra Coating Systems are an innovative approach to metal coatings that offers a long-term sustainable building envelope solution and superior resistance against corrosion, humidity and abrasion in a variety of aggressive environments. Unlike most thin-film architectural coatings available, Versacor Ultra coatings provide a 3-mil-thick Versacor Ultra Barrier Coat Primer over the metal substrate and several top coat finish combinations to achieve enhanced protection in a full palette of colors. Whether it is protecting against the damaging effects of acid rain in the Great Lakes through the Mid-Atlantic, the pounding toll of UV rays in the South or the corrosive salt conditions along our coastal areas, Versacor Ultra has been designed and tested to withstand any harsh environmental condition. The protective properties of Versacor Ultra help prolong the life span of the base metal for an environmentally-friendly, coating solution. CENTRIA s 100+ years of experience providing optimum protection, durability and aesthetics for metal wall and roof systems gives us an edge on the complete coating process. As a founding member of the National Coil Coaters Association (NCCA), we stand apart from our competition by operating our own coil coating facility. This gives us better quality control of our own products, detailed knowledge of coating systems chemistries and application techniques to help us meet your coating needs. Precision Matters Utilizing the latest technology plays an important role in developing new coatings that stand the test of time. Coil Coating Line 2

Versacor Ultra Coatings For more than 25 years, the name Versacor has been the global example for outstanding coating system performance of exterior metal wall and roof systems.

Available in almost every color, Versacor Ultra premium coatings provide enhanced protection against harsh climatic or environmental conditions.

3 Versacor Ultra Coatings For more than 25 years, the name Versacor has been the global example for outstanding coating system performance of exterior metal wall and roof systems. Now the tradition continues with the next generation of Versacor coatings Versacor Ultra. Available in almost every color, Versacor Ultra premium coatings provide enhanced protection against harsh climatic or environmental conditions. These high-build coatings have superior resistance against corrosion, humidity and abrasion when compared to most thin film architectural coatings available today. The 3-mil-thick Versacor Ultra Barrier Coat is applied over the metal substrate and is available with PVDF or Urethane top coat finishes. This permits finish selection that meets your specific project requirements. Coating System Types Fluorofinish (PVDF) is a durable polyvinylidene fluoride coating system containing 70% Kynar 500 /Hylar 5000 resins., HF.8 mil nominal PDVF Coat 3.0 mil nominal Versacor Ultra Barrier Coat Substrate 3.0 mil nominal Versacor Ultra Barrier Coat*.5 mil nominal Backer Coat* 1.5 or 3.0 mil nominal Urethane Coat 3.0 mil nominal Versacor Ultra Barrier Coat Substrate 3.0 mil nominal Versacor Ultra Barrier Coat* Duragard coatings are premium high build architectural finishes that provide premium performance in color retention and fade resistance. Added protection is obtained with our Duragard Plus coating that includes an additional.8 mil PVDF clear top coat. consists of a 3.0-mil-thick Versacor Barrier Coat and a.8-mil-thick PVDF top coat, recommended for corrosive architectural applications. and HF finishes combine the corrosion resistance of the 3.0-mil-thick Versacor Barrier Coat with the durability of a Urethane top coat. Versacor TF uses a 1.5-mil Urethane top coat and Versacor HF uses a 3.0-mil-thick top coat. Reverse Side Protection 1.5 or 3.0 mil nominal Arctic Ice Urethane* *Other combinations of Interior Top Coat Finish for increased reverse side protection are available. On CENTRIA Profile Series panels, with a Versacor Ultra coating system, an optional 3-mil-thick Versacor Barrier Coat may be applied to the interior liner of the metal substrate. A wash coat, Urethane top coat (Arctic Ice standard) or a Polyester top coat (Arctic Ice standard) are applied over the barrier coat. As more exterior walls are designed with open rainscreen wall systems, this additional coating protects against corrosion from the interior and at lap conditions. 3

4 Why Perform Accelerated Paint Coating Testing? Accelerated weathering simulates damaging effects of long-term outdoor exposure of coatings by exposing test samples to varying conditions under laboratory control. Numerous tests explore the performance of coatings in conditions of extreme ultraviolet radiation, moisture, heat, cleaning and corrosive conditions. No direct correlation can be made between accelerated testing and actual outdoor exposure. However, insight into the long-term performance capabilities of coatings are gained by performance comparisons under the controlled conditions of accelerated testing compared to documented results of a coating s long-term outdoor exposure. CENTRIA utilizes Third-Party Verification of paint coating testing to assure quality performance of all available coatings. These tests include: Accelerated Weathering Salt Spray Testing Cyclic Corrosion Testing Humidity Testing Kesternich Testing QUICkER RESULTS Actual outdoor exposure is the best method to test the performance of coated metal products. However, real-time testing does not permit immediate examination of innovative or improved coating system formulas. Accelerated testing under laboratory conditions are an accepted alternative to actual exposure testing and are utilized to simulate long-term performance under a variety of conditions. Most coatings undergo outdoor exposure testing after they pass the accelerated tests. 4

Cyclic Corrosion Testing Purpose: To observe the performance of coatings subject to accelerated conditions of the cyclic corrosion/uv exposure: Salt Spray, duration 72 hrs Drying in air, duration 16

This evaluation must be done after the completion of the two-step (UV exposure and Salt Fog/Dry Exposure) cycles only.

5 Cyclic Corrosion Testing Purpose: To observe the performance of coatings subject to accelerated conditions of the cyclic corrosion/uv exposure: Salt Spray, duration 72 hrs Drying in air, duration 16 hrs UV A-340 nm, duration 80 hrs 12 cycles at 168 hrs/cycle Evaluation: Evaluation is performed every 336 hours or multiples thereof and after completion of testing. This evaluation must be done after the completion of the two-step (UV exposure and Salt Fog/Dry Exposure) cycles only. Methods used for specimen coating corrosion evaluation may include ASTM Test Methods D-610, D-714, and D ASTM D-4587 may also be used and references a number of other standards for evaluating the appearance change of the specimens. Many corrosion specifications today often call for exposing test specimens to a cyclic corrosion test procedure. Current research indicates that these tests give more realistic results than conventional salt spray because the relative corrosion rate, structure and morphology are similar to those seen in actual atmospheric exposures. These procedures typically consist of repetitive cycles of salt fog, high humidity and dry off at elevated temperature. COMPARATIVE RESULTS 12 Cycles Color Change E Coating Type PVDF Duragard Plus No Significant Change No Significant Change Note: a Color Change of Less than 1 E is not perceptible by most people 5

The ability of an organic coating to resist abrasion is often tested by the Abrasion Resistance of Organic Coatings by Falling Sand Abrasive ASTM D-968-93.

6 Abrasion Resistance Purpose: To assess, quantitatively, the abrasion resistance of the coatings. Evaluation: The amount of abrasive required to penetrate one mil of coating to the substrate is measured in liters to determine resistance per mil. The ability of an organic coating to resist abrasion is often tested by the Abrasion Resistance of Organic Coatings by Falling Sand Abrasive ASTM D In this test, an abrasive material (silica sand or silicon carbide) is permitted to fall through a guide tube set at a specified height above a coated panel. The test results shown here are the total liters required to penetrate the entire coating thickness to the substrate. COMPARATIVE RESULTS Liters of Falling Sand Good Best Coating Type PVDF Duragard Plus 6

Salt Spray Testing provides a controlled accelerated corrosive environment to evaluate the relative corrosion resistance of the coating or part itself.

7 Salt Spray Testing Purpose: To study the creepage resistance of flawed coatings under accelerated conditions of the corrosive environment. Evaluation: After 2000 hours, coating defects are assessed per ASTM D-1654, Procedure A at Scribe, ASTM D-610 and ASTM D-714 for the field of the sample panel. Salt Spray Testing provides a controlled accelerated corrosive environment to evaluate the relative corrosion resistance of the coating or part itself. Sample panels are placed inside a chamber and exposed continually for a specified period then evaluated for resistance to rust in accordance with ASTM B COMPARATIVE RESULTS Scribe Protected Edge Blistering After 2000 Hours Coating Type Very Few Few Medium Med. Dense Dense PVDF Duragard Plus No Blistering No Blistering 7

Humidity Testing Purpose: To evaluate the relative corrosion resistance of the coating in a controlled environment. Evaluation: Performance is evaluated by a pass or fail method.

Humidity Testing per ASTM D-2247-97 provides a controlled accelerated corrosive environment to evaluate the relative corrosion resistance of the coating.

8 Humidity Testing Purpose: To evaluate the relative corrosion resistance of the coating in a controlled environment. Evaluation: Performance is evaluated by a pass or fail method. The coating passes if there is no evidence of water-related failure during the time period required. Humidity Testing per ASTM D provides a controlled accelerated corrosive environment to evaluate the relative corrosion resistance of the coating. Understanding how well a coating resists water is important because moisture is often a cause of coating degradation. Humidity Testing is performed in a closed chamber environment at 100 F (38 C) at 100% relative humidity. Sample panels are placed inside the chamber and exposed continually for a specified period then evaluated for resistance to rust. Time length of the test is not specified by ASTM. COMPARATIVE RESULTS Blistering at 2000 Hours Inferior Best Coating Type PVDF Duragard Plus 8

The test calls for dissolving sulfuric dioxide in distilled water, creating sulfuric acid. The chamber is heated for 8 hours at 100% relative humidity.

9 kesternich Testing Purpose: The Kesternich test simulates the detrimental effects of acid rain on a coating. Evaluation: After 30 cycles, samples must exhibit no significant blistering, color change or loss of adhesion to pass. The test calls for dissolving sulfuric dioxide in distilled water, creating sulfuric acid. The chamber is heated for 8 hours at 100% relative humidity. After 8 hours, the chamber is vented of excess sulfuric dioxide and returns to room temperature. The cycle is repeated every day for 30 cycles. COMPARATIVE RESULTS Blistering after 30 Cycles Inferior Best Coating Type PVDF Duragard Plus 9

Accelerated Weathering Purpose: To demonstrate the effect of light on a coating, The Accelerated Weathering test utilizes different light bulb types to simulate

In this test, paint samples are placed in a QUV Accelerated Weatherometer with either an A-Bulb or B-Bulb, in accordance with ASTM D-4587 and G-154, for 2000 Hours.

10 Accelerated Weathering Purpose: To demonstrate the effect of light on a coating, The Accelerated Weathering test utilizes different light bulb types to simulate sunlight. Evaluation: After 2000 hours, paint specimens are rated for chalk and fade. In this test, paint samples are placed in a QUV Accelerated Weatherometer with either an A-Bulb or B-Bulb, in accordance with ASTM D-4587 and G-154, for 2000 Hours. Tested samples are compared to the control sample to rate chalk and fade. COMPARATIVE RESULTS Color Change A-Bulb at 2000 Hours Color Change E Coating Type PVDF Duragard Plus Note: a color change of less than 1 E is not perceptible by most people 10

Warranty Information CENTRIA will warrant the Versacor Ultra coating system against cracking, chipping,

of years noted in the chart below. Coating System Description Warranty Length Substrates Comments.

25 Years on Aluminum in Coastal Environments (Edge Coating Required). Max.

0 mil thick Versacor Ultra Barrier Coat 20 Years Steel and Aluminum Max.

11 Warranty Information CENTRIA will warrant the Versacor Ultra coating system against cracking, chipping, peeling, color change and chalking in accordance with our standards for each coating system and for the number of years noted in the chart below. Coating System Description Warranty Length Substrates Comments.8 mil PVDF over 3.0 mil thick Versacor Ultra Barrier Coat 25 Years Steel and Aluminum Max. 25 Years on Aluminum in Coastal Environments (Edge Coating Required). Max. 20 Years on Steel in Coastal Environments (Edge Coating Required). 1.5 mil Urethane over 3.0 mil thick Versacor Ultra Barrier Coat 20 Years Steel and Aluminum Max. 20 Years on Aluminum in Coastal Environments. Steel in Coastal Environments is not available. 3.0 mil Urethane over 3.0 mil thick Versacor Ultra Barrier Coat 30 Years (Aluminum) 25 Years (Steel ) Steel and Aluminum Max. 25 Years on Aluminum in Coastal Environments. Max. 20 Years on Steel in Coastal Environments. Note: These warranties are in effect within 15 North and South Latitude of the equator for and within 20 North and South latitude of the equator for and HF. 11

NORTHEAST REGION 1.800.586.1372 Baltimore, MD Phone: 410.549.6018 Fax: 410.795.5984 Boston, MA Phone: 978.779.7929 Fax: 978.779.7930 Hartford, CT Phone: 860.659.4045 Fax: 860.659.4034 Newark, NJ Phone: 917.

12 NORTHEAST REGION Baltimore, MD Phone: Fax: Boston, MA Phone: Fax: Hartford, CT Phone: Fax: Newark, NJ Phone: Fax: New York, NY Phone: Fax: Philadelphia, PA Phone: Fax: Pittsburgh, PA Phone: Fax: Syracuse, NY Phone: Fax: Washington, DC Phone: Fax: SOUTH CENTRAL REGION Atlanta, GA Phone: Fax: Charlotte, NC Phone: Fax: Cincinnati, OH Phone: Fax: Detroit, MI Phone: Fax: Greenville, SC Phone: Fax: Indianapolis, IN Cell: Fax: Memphis, TN Phone: Fax: Milwaukee, WI Phone: Fax: Sarasota, FL Phone: Fax: Western Michigan Phone: Fax: WEST REGION Dallas, TX Phone: Fax: Denver, CO Phone: Fax: Des Moines, IA Phone: Fax: Houston, TX Phone: Fax: Minneapolis, MN Phone: Fax: Phoenix, AZ Phone: Fax: San Francisco, CA Phone: Fax: St. Louis, MO Phone: Fax: Seattle, WA Phone: Fax: Southern California (Los Angeles) Phone: Fax: Office of Business Development Phone: Architectural Metal Wall and Roof Systems Beaver Grade Road, Moon Township, PA Phone: Fax: Reference VUB 9/09 5M PG/GCS Copyright 2009 CENTRIA Printed in U.S.A.

INSULATED METAL PANELS METL-SPAN INSULATED COATING SYSTEM OVERVIEW

INSULATED METAL PANELS METL-SPAN INSULATED METAL PANELS COATING SYSTEM OVERVIEW COATINGS OVERVIEW Valspar s extensive coil coating product line offers solutions to a variety of building design and performance