Fire Protection and Applications

Transcription

1 Fire Protection and Applications Technical Insulation Marine ins./fire protection May 2008 Replaces: January 2008

2 Content PAROC Marine insulations meet all requirements...3 Steel decks and bulkheads...4 Fire protection with slab solutions...4 Fire protection with mat solutions...6 Aluminium decks and bulkheads...8 Fire protection with slab solutions...8 Fire protection with mat solutions...10 Engine rooms...12 Air-conditioning machine rooms...13 General applications...14 The information in this brochure represents the sole and comprehensive description of the condition of the product and its technical properties. However, the content of this brochure does not mean granting a commercial guarantee. In so far as the product is used in an area of use which is not provided for in this brochure, we cannot warrant its suitability for said area of use unless the suitability was expressly confirmed by us upon request. This brochure replaces all previous brochures. As a result of constant further development of our products we reserve the right to make alterations to brochures. PAROC is registered trade mark of Paroc Oy Ab. Paroc Group

3 PAROC Marine insulations meet all requirements The shipbuilding industry sets very high requirements for safety and comfort on board. Products and constructions to be used for fire protection must be tested and approved according to the rules and regulations of IMO (International Maritime Organisation). Ships sail in very different conditions, which sets high requirements for thermal insulations. Different kinds of machinery and equipment, passenger facilities, restaurants etc. need sufficient sound insulation to guarantee comformity. Paroc offers economical and safe solutions. Highly developed products, manufactured for the current needs of the shipbuilding industry and its subcontractors, are already widely used. PAROC Marine insulations meet requirements PAROC Marine insulations meet the requirements of their users in the following areas: Fire protection of constructions and components Heating economy of ships and comfort of their passengers, heat and cold insulations Good acoustic properties of constructions and devices Insulation materials used as surface materials are functional and easy to clean Meeting the requirements of Classification Institutes and National Marine Authorities in accordance with the rules and regulations of IMO and the Marine Equipment Directive (modules B and D). PAROC The expert in insulation materials Through market knowledge and research conducted alongside our customers, Paroc has secured its strong position as a manufacturer of insulating materials. All Paroc factories have a certified quality system. Non-combustibility PAROC Marine insulations are manufactured from stone. Stone wool has excellent properties as a passive guarantee of the fire safety of ships. PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200 C, and while the insulating properties remain unchanged, the compressive stress weakens. The stone wool products softening temperature is over 1,000 C. The determination of noncombustibility in accordance with IMO FTP Code Part 1 has been performed for all PAROC Marine insulations. Continuous quality control of the products is performed by VTT (Technical Research Centre of Finland). Construction approvals Fire constructions used within shipbuilding must be tested for their fire resistance, in accordance with the rules and regulations of the IMO (International Maritime Organisation). Based on the approved test result, the Classification Institutes and National Marine Authorities grant the required approvals. For this purpose, the products have been tested in various A-class deck and bulkhead constructions and in numerous fire door and panel constructions. 3

4 Steel decks and bulkheads Fire protection with slab solutions Class Product Density kg/m 3 Insulating thickness level/stiffener, mm Notice! PAROC Marine Fire Slab 100 can be covered with aluminium foil or with black or white glass fibre clothing. Steel decks: 1 A60 PAROC Marine Fire Slab /25 A30 PAROC Marine Fire Slab /25 Steel bulkheads: 2 A60 PAROC Marine Fire Slab /25 A30 PAROC Marine Fire Slab /25 Products to use with stiffeners: 3 PAROC Marine Fire Slab 100, HP PAROC Marine Fire Slab 100, HPL PAROC Marine Fire Slab 100, T PAROC Marine Fire Slab 100, L PAROC Marine Fire Slab 100, Pulb PAROC Marine Fire Slab 100, T 100 Floating floor: Insulating thickness, mm 9 PAROC Marine Floor Slab

5 Steel decks A60 and A30 Example of A60 class insulation solution for steel deck. Base product is PAROC Marine Fire Slab 100 and preformed block is Pulb. Insulating thickness on deck is 40 mm and on stiffener 25 mm. Example of A30 class insulation solution for steel deck. Base product is PAROC Marine Fire Slab 100 and preformed block is Pulb. Insulating thickness on deck is 25 mm and on stiffener 25 mm. Steel bulkheads A60 and A30 Example of A60 class insulation solution for steel bulkhead. Base product is PAROC Marine Fire Slab 100 and preformed block is Pulb. Insulating thickness on bulkhead is 60 mm and on stiffener 25 mm. Example of A30 class insulation solution for steel bulkhead. Base product is PAROC Marine Fire Slab 100 and preformed block is Pulb. Insulating thickness on bulkhead is 40 mm and on stiffener 25 mm. 5

6 Steel decks and bulkheads Fire protection with mat solutions 1 2 Class Product Density kg/m 3 Insulating thickness level/stiffener, mm Notice! PAROC Marine Wired Mats can be covered with aluminium foil or with black or white glass fibre clothing. Steel decks: 1 A60 PAROC Marine Wired Mat /40 A30 PAROC Marine Wired Mat /30 A15 PAROC Marine Wired Mat /30 Steel bulkheads: 2 A60 PAROC Marine Wired Mat /30 A30 PAROC Marine Wired Mat /30 A15 PAROC Marine Wired Mat /30 6

7 Steel decks A60, A30 and A15 Example of A60 class insulation solution for steel deck. Product is PAROC Marine Wired Mat 100. Insulating thickness is 40 mm. Example of A30 class insulation solution for steel deck. Product is PAROC Marine Wired Mat 80. Insulating thickness is 30 mm. Example of A15 class insulation solution for steel deck. Product is PAROC Marine Wired Mat 80. Insulating thickness is 30 mm. Steel bulkheads A60, A30 and A15 Example of A60 class insulation solution for steel bulkhead. Product is PAROC Marine Wired Mat 100. Insulating thickness on bulkhead is 80 mm and on stiffener 30 mm. Example of A30 class insulation solution for steel bulkhead. Product is PAROC Marine Wired Mat 100. Insulating thickness on bulkhead is 40 mm and on stiffener 30 mm. Example of A15 class insulation solution for steel bulkhead. Product is PAROC Marine Wired Mat 80. Insulating thickness is 30 mm. 7

8 Aluminium decks and bulkheads Fire protection with slab solutions Class Product Density kg/m 3 Insulating thickness level/stiffener, mm Aluminium decks: 1 A60 PAROC Marine Fire Slab / Aluminium bulkheads (must be insulated on both sides): 2 A60 PAROC Marine Fire Slab / * ** Notice! PAROC Marine Fire Slab 100 can be covered with aluminium foil or with black or white glass fibre clothing. Products to use with stiffeners: 3 PAROC Marine Fire Slab 100, HP PAROC Marine Fire Slab 100, HPL PAROC Marine Fire Slab 100, T PAROC Marine Fire Slab 100, L 100 * Insulating thickness (level/stiffener) on stiffeners side ** Insulating thickness on other side 8

9 Aluminium deck A60 Aluminium bulkhead A60 Example of A60 class insulation solution for aluminium deck. Base product is PAROC Marine Fire Slab 100 G1 and preformed blocks HP and Pulb. Insulating thickness in all products is 25 mm. Example of A60 class insulation solution for aluminium bulkhead. Base product is PAROC Marine Fire Slab 100 G1 and preformed blocks HP and Pulb. Insulating thickness in all products is 30 mm. 9

10 Aluminium decks and bulkheads Fire protection with mat solutions 1 2 Class Product Density kg/m 3 Insulating thickness level/stiffener, mm Notice! PAROC Marine Wired Mats can be covered with aluminium foil or with black or white glass fibre clothing. Aluminium decks: 1 A60 PAROC Marine Wired Mat /50 Aluminium bulkheads (must be insulated on both sides): 2 A60 PAROC Marine Wired Mat /60 * 60 ** * Insulating thickness (level/stiffener) on stiffeners side ** Insulating thickness on other side 10

11 Aluminium deck A60 Aluminium bulkhead A60 Example of A60 class insulation solution for aluminium deck. Product is PAROC Marine Wired Mat 100. Insulating thickness is 50 mm. Example of A60 class insulation solution for aluminium deck. Product is PAROC Marine Wired Mat 100. Insulating thickness is 60 mm on both sides. 11

12 Engine rooms Class Product Density kg/m 3 Insulating thickness level/stiffener, mm Decks: 1 A60 PAROC Marine Fire Slab white glass fibre cloth Bulkheads: 2 A60 PAROC Marine Fire Slab white glass fibre cloth / /25 Pipes (vapour, heating, fuel oil, sewage, warm water, etc.): 3 PAROC Section + white glass fibre cloth Exhaust pipe: 100 Insulating thickness, mm 4 PAROC Marine Wired Mat Exhaust pipe dampers: 5 PAROC Marine Wired Mat

13 Air-conditioning machine rooms Class Product Density kg/m 3 Insulating thickness level/stiffener, mm Decks: 1 A0 PAROC Marine Slab 40 + white glass fibre cloth Bulkheads: 2 A0 PAROC Marine Wired Mat 28 + white glass fibre cloth 40 50/ /50 Air conditioning ducts: Insulating thickness, mm 3 PAROC Lamella Mat 50 AluCoat Pipes (cooling and cold water): 4 PAROC Section AluCoat T

14 General applications Class Product Density kg/m 3 Insulating thickness level/stiffener, mm Decks: 1 A60 PAROC Marine Fire Slab /25 2 A60 PAROC Marine Fire Slab black glass fibre cloth /25 Bulkheads: 3 Thermal PAROC Marine Wired Mat / Cabin: Thermal PAROC Marine Slab /50 Insulating thickness, mm Wall 4 B15* PAROC Marine Slab grey non-woven tissue Roof 5 B15* PAROC Marine Slab Door 6 B15* PAROC Marine Slab Corridor: Insulating thickness, mm Wall 7 B15* PAROC Marine Slab Roof 8 Sound PAROC Marine Slab Door 9 A60* PAROC Marine Slab LO Wall extension 10 B15* PAROC Marine Slab grey non-woven tissue Floating floor: 11 A60 PAROC Marine Floor Slab * An example of customer constructions where PAROC products are used. 14

15 More information from The latest information on our products and solutions is available on our web pages. As part of our service package for you, we keep our web pages constantly updated.

16