SEISMIC SWAY BRACING

Transcription

1 SEISMI SWY RING

2 SEISMI SWY RING SWY RE TP220 Quick lamp Lateral Sway race Pipe ttachment Used for laterally bracing pipe in seismic sway events Size Range: 1-1/4 thru 8 service pipe For use with Schedule 10 and 40 brace pipe Slotted design grabs brace pipe for robust gripping strength Snap off nut design for easy installation inspection at the recommended torque UL Listed for lateral bracing for 1-1/4 to 5 service pipe with SH40, 1 to 4 service pipe with SH10 omplies with NFP 13 Easy to install Finish: Electro-zinc galvanized (EG listed below) or Plain (PL) finish also avalable (Service Pipe Size) (race Pipe Size) TP EG 1-1/ /16 TP EG 1-1/ /8 TP EG /16 TP EG 2-1/ /2 TP EG /4 TP EG /8 TP EG /8 TP EG* TP EG* /4 TP EG 1-1/4 1-1/4 5-1/4 TP EG 1-1/2 1-1/4 5-1/2 TP EG 2 1-1/4 6 TP EG 2-1/2 1-1/4 6-1/2 TP EG 3 1-1/4 7-1/4 TP EG 4 1-1/4 8-5/16 TP EG 5 1-1/4 9-1/4 TP EG* 6 1-1/4 10-1/2 TP EG* 8 1-1/4 12 race Pipe *Not Listed Service Pipe 2 sia:

3 SEISMI SWY RING & G SEISMI STRUTURL TTHMENT Quick End Structural ttachment lamp for Seismic Sway racing Used to attach bracing pipe to structure for lateral and/or longitudinal sway bracing Slotted design grabs brace pipe for robust gripping strength racing pipe size range: 1 and 1-1/4 For use with Schedule 10 and 40 brace pipe UL Listed for bracing 1 to 8 service pipe omplies with NFP 13 Easy to install Finish: Electro-zinc galvanized (EG listed below) or Plain (PL) finish also avalable G Fig. No. (race Pipe Size) Recommended Service Pipe Size G100EG* to 8 1-3/8 1-1/4 1-1/4 G125EG* 1 1-1/4 4 to 8 1-5/8 1-1/4 1-1/4 100EG to 3-1/2 1-3/8 1-3/8 1-1/8 125EG 2 1-1/4 1 to 3-1/2 1-5/8 1-3/8 1-1/8 *Heavy Duty ssembly D D Ø 14,3 mm Fig. 2 D 17/32 Fig. 1 Fig. 1 G Fig. 2 G sia:

4 SEISMI SWY RING TP230 & TP230G SEISMI PIPE TTHMENT Quick In-line Lateral & Longitudinal Sway race lamp Used to attach bracing pipe to service pipe for lateral and/or longitudinal sway bracing Slotted design grabs brace pipe for robust gripping strength racing pipe size range: 1 and 1-1/4 For use with Schedule 10 and 40 brace pipe UL Listed for bracing 2 to 8 service pipe, TP , TP230G 4-8 omplies with NFP 13 Easy to install Finish: Electro-zinc galvanized (EG listed below) or Plain (PL) finish also avalable (Service Pipe Size) TP EG 1 1 3/16 1 TP EG 1-1/4 1 3/16 1 TP EG 1-1/2 1 3/16 1 TP EG 2 1 3/16 1 TP EG 2-1/2 1 3/16 1 TP EG 3 1 3/16 1 TP EG 1-1/4 1-1/4 3/16 1 TP EG 1-1/2 1-1/4 3/16 1 TP EG 2 1-1/4 3/16 1 TP EG 2-1/2 1-1/4 3/16 1 TP EG 3 1-1/4 3/16 1 TP230G EG* 4 1 3/16 1 TP230G EG* 5 1 3/16 2 TP230G EG* 6 1 3/16 2 TP230G EG* 8 1 1/4 2 TP230G EG* 4 1-1/4 3/16 1 TP230G EG* 5 1-1/4 3/16 2 TP230G EG* 6 1-1/4 3/16 2 TP230G EG* 8 1-1/4 1/4 2 *Heavy Duty ssembly TP230 and Seismic Sway racing Set (race Pipe Size) (Service Pipe lamp Thickness) D (Service Pipe lamp Width) TP230G TP230G and G Seismic Sway racing Set race Pipe TP230 TP230 TP230G D 4 Service Pipe sia:

5 SEISMI SWY RING SWY RING S55 S55N Easy ttach Sway race Lateral and longitudinal sway bracing attachments culus Listed omplies with NFP 13 Set screw torque in the brace attachment is 160 in-lbs Structural attachment bracket (S50N) included with S55N, additional S50N attachments can be ordered separately for added attachment strength For use with ERI Pipe lamp and Plain (PL) finish Description race Pipe Size Finish Sprinkler Pipe Size to be raced Working Load (lbs) Max. Rec. Torque Value for olts (ft lbs) ttachment Hole Size S55N EG Sway brace clamp, 3/8 x 1 1 EG 1 to 2-1/ /8 S55N PL Sway brace clamp, 3/8 x 1 1 Plain 1 to 2-1/ /8 S55N EG Sway brace clamp, 1/2 x 1 1 EG 1 to 3-1/ /2 S55N PL Sway brace clamp, 1/2 x 1 1 Plain 1 to 3-1/ /2 S55N EG Sway brace clamp, 5/8 x 1 1 EG 1 to /8 S55N PL Sway brace clamp, 5/8 x 1 1 Plain 1 to /8 S55N EG Sway brace clamp, 3/8 x /4 EG 1 to 2-1/ /8 S55N PL Sway brace clamp, 3/8 x /4 Plain 1 to 2-1/ /8 S55N EG Sway brace clamp, 1/2 x /4 EG 1 to 3-1/ /2 S55N PL Sway brace clamp, 1/2 x /4 Plain 1 to 3-1/ /2 S55N EG Sway brace clamp, 5/8 x /4 EG 1 to /8 S55N PL Sway brace clamp, 5/8 x /4 Plain 1 to /8 ttachment Hole Size Finish S50N038EG 3/8 EG S50N050EG 1/2 EG S50N062EG 5/8 EG S50N038PL 3/8 Plain S50N050PL 1/2 Plain S50N062PL 5/8 Plain S50N ttachment Hole Size S55N dditional S50N if needed race Pipe sia:

6 SEISMI SWY RING VERTIL ROD STIFFENER VS Threaded Rod Support Size Range: 1/2 rod size Fits,, D, and E channels Thread Size VS0050EG 1/2 to /8 13/16 1-5/8 UL LISTING & TESTED WORKING LOD HRT FOR DDY RND OF SWY RES* Pipe Size Working Load Per U.L. 203 TP220 G TP230 TP230G TP235 TP LISTED LISTED LISTED LISTED NOT LISTED LISTED LISTED 2-1/2 395 LISTED LISTED LISTED LISTED NOT LISTED LISTED LISTED LISTED LISTED LISTED LISTED NOT LISTED LISTED LISTED 3-1/2 540 LISTED LISTED LISTED NOT LISTED LISTED LISTED LISTED LISTED** LISTED LISTED NOT LISTED LISTED LISTED LISTED LISTED LISTED LISTED NOT LISTED LISTED LISTED LISTED NOT LISTED NOT LISTED LISTED NOT LISTED LISTED LISTED NOT LISTED NOT LISTED NOT LISTED LISTED NOT LISTED LISTED LISTED NOT LISTED *See website for latest updates at ** TP220 list only through 4 pipe for schedule 10 pipe 1. Sway races from ERIO are UL tested and Listed for use with STM schedule 10 and 40 brace pipe 2. Sway races from ERIO meet the full UL rated load when used with 1 or 1-1/4 schedule 40 brace pipe 3. Sway races from ERIO meet the UL requirement that lateral braces must support a load equal to 1-1/2 times the working load without slippage. ctual working load capacity can be more than UL203 above. See our rated loads on the UL website. 6 sia:

7 SEISMI SWY RING SWY RE TP280 Threaded Sway race Fitting Size Range: 1 pipe Used with s: #400, #450, #610, and any length of 1 pipe to restrain pipe from swaying during an earthquake NOTE: Plain (PL) finish available by special order Pipe Size Style TP EG 1 TP280P0100EG 1 Welded Structural ttachment 320W0050PL Style Style SWY RE TP240 Quick 4-way Longitudinal Sway race lamp Size Range: 1 and 1-1/4 bracing pipe Used for longitudinally bracing lateral sway bracing against sway disturbance omplies with NFP 13 lso used for riser bracing NOTE: lso available in Plain (PL) finish (race Pipe Size) x 1 1 TP EG 1 x 1 1-3/8 1-3/8 TP EG 1-1/4 x 1-1/4 1-3/8 1-5/8 1 1 sia:

8 SEISMI SWY RING SWY RE TP235 Quick Tab Welded Longitudinal Sway race Fitting Size Range: 1 and 1-1/4 bracing pipe Used for longitudinally bracing piping against sway when welding is an option omplies with NFP 13 NOTE: lso available in Plain (PL) finish (race Pipe Size) x 1 TP235100EG 1 3/16 1 TP235125EG 1-1/4 3/16 1 SWY RING DPTER PLTE Quick Loader dapter Plate llows to be attached with two or three attachment bolts omplies with NFP 13 NOTE: lso available in Plain (PL) finish EG 120 NFP is a registered trademark of the National Fire Protection ssociation UL is a registered trademark of the Underwriters Laboratories, Inc. WRNING ERIO products shall be installed and used only as indicated in ERIO s product instruction sheets and training materials. Instruction sheets are available at and from your ERIO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERIO s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death. WRRNTY ERIO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WRRNTY, WHETHER EXPRESS OR IMPLIED (INLUDING NY WRRNTY OF MERHNTILITY OR FITNESS FOR PRTIULR PURPOSE), SHLL EXIST IN ONNETION WITH THE SLE OR USE OF NY ERIO PRODUTS. laims for errors, shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after uyer s receipt of products. ll other claims must be made in writing to ERIO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERIO s prior written approval in accordance with its standard terms and procedures governing returns, promptly be returned to ERIO for inspection. laims not made as provided above and within the applicable time period will be barred. ERIO shall in no event be responsible if the products have not been stored or used in accordance with its specifications and recommended procedures. ERIO will, at its option, either repair or replace nonconforming or defective products for which it is responsible or return the purchase price to the uyer. THE FOREGOING STTES UYER S EXLUSIVE REMEDY FOR NY REH OF ERIO WRRNTY ND FOR NY LIM, WHETHER SOUNDING IN ONTRT, TORT OR NEGLIGENE, FOR LOSS OR INJURY USED Y THE SLE OR USE OF NY PRODUT. LIMITTION OF LIILITY ERIO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERIO s employees. Should ERIO be held liable its liability shall in no event exceed the total purchase price under the contract. ERIO SHLL IN NO EVENT E RESPONSILE FOR NY LOSS OF USINESS OR PROFITS, DOWNTIME OR DELY, LOR, REPIR OR MTERIL OSTS OR NY SIMILR OR DISSIMILR ONSEQUENTIL LOSS OR DMGE INURRED Y UYER United States Europe sia Phone: Phone: Phone: Fax: Fax: Fax: M759-WWEN M1059LT07WWEN 012.5M8