Effective Date: October Rev. 11/6/2017- Void After: October Product: Roof Drains File No. 4835

Size: px
Start display at page:

Download "Effective Date: October Rev. 11/6/2017- Void After: October Product: Roof Drains File No. 4835"

Transcription

1 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction. The most updated information on this Certificate of Listing is available online at pld.iapmo.org Effective Date: October 2017 ev. 11/6/2017- Void After: October Pittsburgh Ave Erie, PA Identification: The roof drains shall be permanently marked with the Manufacturer's name or trademark on the grate, cover, or top rim, and on the drain body. Residential roof drains shall be permanently marked with the load classification. The product shall also bear the cupc certification mark. Characteristics: Roof drains designed to receive and convey rain water from roof areas to the drainage systems, available in various designs, shapes, sump depth, and outlet location. The types included are, but not limited to, general purpose, gutter and cornice, parapet and promenade or deck types. To be installed in accordance with the latest edition of the Uniform Plumbing Code and the National Plumbing Code of Canada. Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IEC Products are in compliance with the following code(s): Uniform Plumbing Code (UPC ) This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material, manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing. Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc. Any alteration of this certificate could be grounds for revocation of the listing. This document shall be reproduced in its entirety.

2 National Plumbing Code of Canada International Plumbing Code (IPC ) Products are in compliance with the following standard(s): ASME A (R08) and CSA B79-08 (R2013)

3 MODELS: Note: Models preceded by a "c" shall bear the cupc certification mark. All other models shall bear the UPC certification mark Model No. RD-2130 Description No-Hub Cast Iron Roof Drain (light duty) The following models shall bear the cupc mark: crd where 1 = Dome Material, either CI for Cast Iron or PL for Plastic where 2 = Body Material, either P for PVC, A for ABS, or C for Cast Iron where 3 = Body Connection Size, either 2 for 2 Connection, 3 for 3 Connection or 4 for 4 Connection where 4 = Body Connection Type, either S for Solvent Weld, N for No-Hub, or P for Push-On where 5 = Roof Drain options, any combination of R for Roof Sump Receiver, U for Underdeck Clamp, or none. In alphabetical order. Individual Components are as follows: Roof Drain with descriptive Size and Dome Material clcd08ci: 8" Roof Drain with Cast Iron Gravel Guard and Cast Iron Dome clcd08pl: 8" Roof Drain with Cast Iron Gravel Guard and Polypropylene Dome Drain Body with descriptive Material Type, Outlet Size, and Outlet Type clc2n Cast Iron Drain Body with 2" No-Hub Outlet clc3n Cast Iron Drain Body with 3" No-Hub Outlet clc4n Cast Iron Drain Body with 4" No-Hub Outlet clc2p Cast Iron Drain Body with 2" Push-On Outlet clc3p Cast Iron Drain Body with 3" Push-On Outlet clc4p Cast Iron Drain Body with 4" Push-On Outlet clc-p2s PVC Drain Body with 2" Solvent Weld Outlet clc-p3s PVC Drain Body with 3" Solvent Weld Outlet clc-p4s PVC Drain Body with 4" Solvent Weld Outlet clc-a2s ABS Drain Body with 2" Solvent Weld Outlet clc-a3s ABS Drain Body with 3" Solvent Weld Outlet clc-a4s ABS Drain Body with 4" Solvent Weld Outlet Roof Drain Options clc Underdeck Clamp clcs Roof Sump Receiver Page 3 of 15

4 Note: Models marked with c shall bear the cupc mark IC, 3IC, 4IC, 5IC, 6IC, 5IP, 6IP, 5NH, 6NH 2NL, 3NL, 4NL, 6NL A C -AC -AR -AW -BS -DE -DP -DR -DX -E -EA -EB -FG D -HD -SC -SS -ST -TC -W2 -W3 -W c100 (Canadian Market) Page 4 of 15

5 2IC, 3IC, 4IC, 6IC, 6IP, 6NH 2NL, 3NL, 4NL A C -A -AR -AW -DP -DR -DX -E -EA -EB -FG D -SC -SSM -TC -W2 -W3 -W4 -XJ IC, 3IC, 4IC 2NL, 3NL, 4NL Page 5 of 15

6 A C Weirs N1 N2 N3 N4 N5 N6 N1-10 N2-10 N3-10 N4-10 N5-10 N6-10 -DE -DP -DR -DX -E -EA -SC -TC -XJ c105 (Canadian Market) 2IC, 3IC, 4IC 2NL, 3NL, 4NL Page 6 of 15

7 A Weirs N1 N2 N3 N4 N5 N6 -A -AR -DP -DR -DX -E -EA -EB -SC -TC -XJ IC, 3IC, 4IC 2NL, 3NL, 4NL -AR -DB -DE -DG -DP Page 7 of 15

8 -DR -DT -DX -E -EA -EB -HF -S -SC -TC -TS -XJ -Y c150 (Canadian Market) 2IC, 3IC, 4IC 2NL, 3NL, 4NL -AR -DB -DE -DG -DP -DR -DT -DX -E -EA -EB -HF Page 8 of 15

9 -S -SC -TC -TS -XJ -Y DA c160 (Canadian Market) -DA 181 2IP, 3IP 3NH Page 9 of 15

10 -BS -HD -SS -8 c181 (Canadian Market) 2IP, 3IP 3NH -BS -HD -SS IP -HD -45 Page 10 of 15

11 c185 (Canadian Market) 3IP -HD BS -DA -TS c189 (Canadian Market) -BS -DA Page 11 of 15

12 -TS 104 3IC, 4IC, 6IC 3NH, 4NH, 6NH 3NL, 4NL, A, C, -AC, -AR, -AW (with 3" and 4" outlet sizes only), -BS,, -DX, -E, -EA, -FG (with 3" outlet sizes only),, D,, -SC, -SS,, -W2, -W3, -W4, -84, -85, -89 c104 (Canadian Market) 3IC, 4IC, 6IC 3NH, 4NH, 6NH 3NL, 4NL, A, C, -AC, -AR, -AW (with 3" and 4" outlet sizes only), -BS,, -DX, -E, -EA, -FG (with 3" outlet sizes only),, D,, -SC, -SS,, -W2, -W3, -W4, -84, -85, IC, 4IC, 6IC 3IP, 4IP 3NH, 4NH, 6NH, A, C, -AC, -AR, -AW (with 3" and 4" outlet sizes only), -BS,, -E, -EA, -FG (with 3" outlet sizes only),, D, -HD, -SS,, -W2, -W3, -W4, -XJ, -84, -85, -89 c107 (Canadian Market) 3IC, 4IC, 6IC 3IP, 4IP 3NH, 4NH, 6NH, A, C, -AC, -AR, -AW (with 3" and 4" outlet sizes only), -BS,, -E, -EA, -FG (with 3" outlet sizes only),, D, -HD, -SS,, -W2, -W3, -W4, -XJ, -84, -85, -89 Page 12 of 15

13 121 2IC, 3IC 2IP, 3IP 2NH, 3NH 2NL, 3NL, A, C, -AR, -BS,, -DB, -DP, -DR, -E, -EB, -FG,,, -SC, -SS, -TC,, -XJ, -84, -85, -89, IC 2IP 2NH 2NL, A, C -AR, -BS,, -DP, -DR, -E, - EB,,, -SC, -SS, -TC,, -XJ, -84, -85, -89, -90 c125 (Canadian Market) 2IC 2IP 2NH 2NL, A, C -AR, -BS,, -DP, -DR, -E, - EB,,, -SC, -SS, -TC,, -XJ, -84, -85, -89, IC, 3IC 2IP, 3IP 2NH, 3NH 2NL, 3NL,, -AR,, -DG, -DP, -DT, -E, -EB,,, -S, -SC, -TC, -TS,, -XJ, -Y, -85, -90 c154 (Canadian Market) 2IC, 3IC 2IP, 3IP Page 13 of 15

14 2NH, 3NH 2NL, 3NL,, -AR,, -DG, -DP, -DT, -E, -EB,,, -S, -SC, -TC, -TS,, -XJ, -Y, -85, IP 2NH,, -AR,, -DG, -DP, - DT (with 2" outlet sizes only), -E, -EB,,, -SC, -TS,, -XJ, -Y, -85, -90 c158 (Canadian Market) 2IP 2NH,, -AR,, -DG, -DP, - DT (with 2" outlet sizes only), -E, -EB,,, -SC, -TS,, -XJ, -Y, -85, , A -AR, -BS, -E,, -SC, -SS,, -XJ, -84, -85 c165 (Canadian Market), A -AR, -BS, -E,, -SC, -SS,, -XJ, -84, -85 Other Gen II LC Products Model No. Description Page 14 of 15

15 crd1-pv2 crd1-pv3 crd1-pv4 crd1-ab2 crd1-ab3 crd1-ab4 crd1-nh2 crd1-nh3 crd1-nh4 crd1-po2 crd1-po3 crd1-po4 8" Roof Drain w/ 2" PVC Outlet 8" Roof Drain w/ 3" PVC Outlet 8" Roof Drain w/ 4" PVC Outlet 8" Roof Drain w/ 2" ABS Outlet 8" Roof Drain w/ 3" ABS Outlet 8" Roof Drain w/ 4" ABS Outlet 8" Roof Drain w/ 2" NH Outlet 8" Roof Drain w/ 3" NH Outlet 8" Roof Drain w/ 4" NH Outlet 8" Roof Drain w/ 2" PO Outlet 8" Roof Drain w/ 3" PO Outlet 8" Roof Drain w/ 4" PO Outlet Page 15 of 15

Effective Date: January Rev. 3/14/2017- Void After: January Product: Chemical Dispensing Systems File No. 3530

Effective Date: January Rev. 3/14/2017- Void After: January Product: Chemical Dispensing Systems File No. 3530 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

IAPMO RESEARCH AND TESTING, INC E. Philadelphia Street, Ontario, CA (909) Fax (909)

IAPMO RESEARCH AND TESTING, INC E. Philadelphia Street, Ontario, CA (909) Fax (909) IAPMO RESEARCH AND TESTING, INC. 5001 E. Philadelphia Street, Ontario, CA 91761-2816 (909) 472-4100 Fax (909) 472-4244 www.iapmort.org CERTIFICATE OF LISTING IAPMO Research and Testing, Inc. is a product

More information

EVALUATION SUBJECT: ENAMELED CAST IRON PLUMBING FIXTURES DIVISION: PLUMBING SECTION: PLUMBING EQUIPMENT PLUMBING FIXTURES

EVALUATION SUBJECT: ENAMELED CAST IRON PLUMBING FIXTURES DIVISION: PLUMBING SECTION: PLUMBING EQUIPMENT PLUMBING FIXTURES ICC-ES Report PMG-1378 Reissued 03/2017 This report is subject to renewal 03/2018 EVALUATION SUBJECT: ENAMELED CAST IRON PLUMBING FIXTURES DIVISION: 22 00 00 PLUMBING SECTION: 22 30 00 PLUMBING EQUIPMENT

More information

FLOOR AND AREA DRAINS

FLOOR AND AREA DRAINS Pictorial Index Product Recommendations Floor Drain Selection Factors Load Rating Grate Free Area Material & Characteristics Pipe Connection Commonly Specified Options Typical Installations FLOOR AND AREA

More information

LIT-058 ROOFGUARD-2017 The Uncloggable Roof Drain Dome Go to for the most current product specification sheets.

LIT-058 ROOFGUARD-2017 The Uncloggable Roof Drain Dome Go to  for the most current product specification sheets. www.mifab.com The Uncloggable Roof Drain Dome ROOFGUARD-2017 Go to www.mifab.com for the most current product specification sheets. DESIGNED, ASSEMBLED AND PACKAGED IN THE USA LIT-058 MIFAB, Inc. 1321

More information

JAY R. SMITH MFG. CO. MAY, 2015 VOLUME 5 ISSUE 4

JAY R. SMITH MFG. CO. MAY, 2015 VOLUME 5 ISSUE 4 ENGINEERING COMMUNIQUÉ JAY R. SMITH MFG. CO. MAY, 2015 VOLUME 5 ISSUE 4 From: THE SMITH ENGINEERING GROUP SUBJECT: 2015 EDITIONS of the IAPMO/UPC & ICC/IPC PLUMBING CODES The 2015 editions of the IAPMO-UPC

More information

Roof Drains. Specification Drainage Engineering Guide

Roof Drains. Specification Drainage Engineering Guide Roof Drains Specification Drainage Engineering Guide www.zurn.com Distributed by: BEST MATERIALS LLC, Phoenix AZ Ph: 800-474-7570, 602-272-8128 Fx: 602-272-8014 www.bestmaterials.com Email: Sales@BestMaterials.com

More information

DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES

DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES SECTION 15420 DRAINAGE AND VENT SYSTEMS PART 1 DESIGN DIRECTIVES 1.1 DESIGN CRITERIA A. All cleanouts above finished (accessible and non-accessible) ceilings shall be extended to the floor above. B. Do

More information

EVALUATION SUBJECT: NIRON POLYPROPYLENE (PP-RCT) PIPING SYSTEM DIVISION: PLUMBING SECTION: DOMESTIC WATER PIPING

EVALUATION SUBJECT: NIRON POLYPROPYLENE (PP-RCT) PIPING SYSTEM DIVISION: PLUMBING SECTION: DOMESTIC WATER PIPING ICC-ES Report PMG-1244 Reissued 04/2017 This report is subject to renewal 04/2018 EVALUATION SUBJECT: NIRON POLYPROPYLENE (PP-RCT) PIPING SYSTEM DIVISION: 22 00 00 PLUMBING SECTION: 22 11 16 DOMESTIC WATER

More information

SECTION FACILITY STORM DRAINAGE

SECTION FACILITY STORM DRAINAGE PART 1 - GENERAL 1.1 DESCRIPTION SECTION 22 14 00 Storm drainage systems, including piping and all necessary accessories as designated in this section. 1.2 RELATED WORK A. Penetrations in rated enclosures:

More information

Daytona Beach Pier Building Renovation Jun 2010

Daytona Beach Pier Building Renovation Jun 2010 SECTION 15150 - SANITARY WASTE AND VENT PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017 SECTION 22 1319 - SANITARY WASTE PIPING SPECIALTIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

DRAINS AND CLEANOUTS. 1. Division 7 - Thermal and Moisture Protection Piping (Plumbing).

DRAINS AND CLEANOUTS. 1. Division 7 - Thermal and Moisture Protection Piping (Plumbing). SECTION 15421 DRAINS AND CLEANOUTS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. Division 7 - Thermal and Moisture Protection. 2. 15410 - Piping (Plumbing). 1.02 SUBMITTALS A. Product Data: Submit

More information

S-TIFAS 99 Series. S-TIFAS 99 Site Sizeable. Installation (S) Site Sizable. Finishes: Complete Kits:

S-TIFAS 99 Series. S-TIFAS 99 Site Sizeable. Installation (S) Site Sizable. Finishes: Complete Kits: S-TIFAS 99 Series S-TIFAS 99 Site Sizeable - Modify length and locate outlet on-site - Indoor or outdoor use - Incorporates tile or solid surface material within the grate frame - 316 stainless steel grate

More information

MIFAB Master Specification. Plumbing Drainage & Specialties - Specification For Commercial, Industrial & Institutional Facilities

MIFAB Master Specification. Plumbing Drainage & Specialties - Specification For Commercial, Industrial & Institutional Facilities Plumbing Drainage & Specialties - Specification For Commercial, Industrial & Institutional Facilities Specification Category Description RD Roof Drains Roof Drains Roof Drains (Standard Flow: Conventional

More information

EVALUATION SUBJECT: CURAFLO ENGINEERED FLOW LINING SYSTEMS DIVISION: PLUMBING SECTION: DOMESTIC WATER PIPING.

EVALUATION SUBJECT: CURAFLO ENGINEERED FLOW LINING SYSTEMS DIVISION: PLUMBING SECTION: DOMESTIC WATER PIPING. ICC-ES Report PMG-1057 Reissued 02/2018 This report is subject to renewal 02/2019 EVALUATION SUBJECT: CURAFLO ENGINEERED FLOW LINING SYSTEMS DIVISION: 22 00 00 PLUMBING SECTION: 22 11 16 DOMESTIC WATER

More information

EVALUATION SUBJECT: TEEL BQ POLYPROPYLENE (PP-RCT) PIPING SYSTEM

EVALUATION SUBJECT: TEEL BQ POLYPROPYLENE (PP-RCT) PIPING SYSTEM ICC-ES Report PMG-1452 Issued 01/2018 This report is subject to renewal 01/2019 EVALUATION SUBJECT: TEEL BQ POLYPROPYLENE (PP-RCT) PIPING SYSTEM DIVISION: 22 00 00 PLUMBING SECTION: 22 11 00 FACILITY WATER

More information

EVALUATION SUBJECT: PLUMBING SUPPLY FITTINGS

EVALUATION SUBJECT: PLUMBING SUPPLY FITTINGS ICC-ES Report PMG-1297 Reissued 12/2017 This report is subject to renewal 12/2018 EVALUATION SUBJECT: PLUMBING SUPPLY FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 40 00 PLUMBING FIXTURES 22 09 00 INSTRUMENTATION

More information

AS/NZS 1477:2017. Australian/New Zealand Standard. PVC pipes and fittings for pressure applications. Superseding AS/NZS 1477:2006 AS/NZS 1477:2017

AS/NZS 1477:2017. Australian/New Zealand Standard. PVC pipes and fittings for pressure applications. Superseding AS/NZS 1477:2006 AS/NZS 1477:2017 AS/NZS 1477:2017 Australian/New Zealand Standard PVC pipes and fittings for pressure applications Superseding AS/NZS 1477:2006 AS/NZS 1477:2017 AS/NZS 1477:2017 This joint Australian/New Zealand standard

More information

MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING

MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING SECTION 221316 - SANITARY WASTE AND VENT PIPING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following soil and waste, sanitary drainage and vent piping inside the building: 1. Pipe, tube,

More information

Ph: Fax Web: East Philadelphia Street Ontario, California USA

Ph: Fax Web: East Philadelphia Street Ontario, California USA TEST REPORT Ph: 909.472.4100 Fax 909.472.4243 Web: www.iapmo.org 5001 East Philadelphia Street Ontario, California 91761-2816 - USA Report Number: 1724-12001 Report Issued: July 27, 2012 Project No.: 20581

More information

DUKE UNIVERSITY CONSTRUCTION STANDARDS

DUKE UNIVERSITY CONSTRUCTION STANDARDS 1 07 40 00 Roofing 1. General Several factors repeatedly show up during the inspection of roofs that have failed prematurely. They include inappropriate use of materials, poor drainage systems, poor details

More information

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017 SECTION 22 1316 - SANITARY WASTE AND VENT PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01

More information

Originally Issued: 02/11/2011 Revised: 02/23/2018 Valid Through: 02/28/2019

Originally Issued: 02/11/2011 Revised: 02/23/2018 Valid Through: 02/28/2019 MITEK USA, INC. USP HOLDOWN AND TENSION-TIE CONNECTORS CSI Section: 06 05 23 Wood, Plastic and Composite Fastenings 1.0 RECOGNITION MiTek USA, Inc. USP holdown and tension-tie connectors recognized in

More information

EVALUATION SUBJECT: PERMA-LATERAL PULLED- IN-PLACE CURED-IN-PLACE PIPE LINING SYSTEM

EVALUATION SUBJECT: PERMA-LATERAL PULLED- IN-PLACE CURED-IN-PLACE PIPE LINING SYSTEM ICC-ES Report PMG-1074 Reissued 11/2017 This report is subject to renewal 11/2018 EVALUATION SUBJECT: PERMA-LATERAL PULLED- IN-PLACE CURED-IN-PLACE PIPE LINING SYSTEM DIVISION: 22 00 00 PLUMBING SECTION:

More information

MODEL SJ10. Installation Manual. SumpJet TM - Water Powered Backup System C IMPORTANT: MODEL SERIAL

MODEL SJ10. Installation Manual. SumpJet TM - Water Powered Backup System C IMPORTANT: MODEL SERIAL Installation Manual 5824000C SumpJet TM - Water Powered Backup System MODEL SJ10 7000 Apple Tree Avenue, Bergen, NY 14416 Phone: (800) 543-2550 liberty@libertypumps.com website: www.libertypumps.com IMPORTANT:

More information

Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry

Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry ANSI/API SPECIFICATION Q1 EIGHTH EDITION, DECEMBER 2007 EFFECTIVE DATE: JUNE 15, 2008 CONTAINS API MONOGRAM

More information

EVERHOT INC. Everhot PEX Tubing for Potable Water Applications & Radiant Floor Heating

EVERHOT INC. Everhot PEX Tubing for Potable Water Applications & Radiant Floor Heating Everhot PEX Tubing for Potable Water Applications & Radiant Floor Heating Manual Contents Contents page 2 Overview page 3 Products page 3 Applications page 4 Standards page 4 Listings & Approvals page

More information

INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS

INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS INTERIM GUIDE CRITERIA FOR AEROBIC BACTERIAL GENERATOR FOR INSERT INTO SEPTIC TANKS, GREASE INTERCEPTORS AND GREASE TRAPS IAPMO IGC 180-20023

More information

A. Codes and Standards that are standard at the University. C. Coordinate cleanout locations with Architect.

A. Codes and Standards that are standard at the University. C. Coordinate cleanout locations with Architect. PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is

More information

Code Compliance Research Report CCRR-0194

Code Compliance Research Report CCRR-0194 Code Compliance Research Report CCRR-0194 Issued: 09-16-2013 Renewal Due: 09-16-2018 Revised: 10-12-2017 DIVISION: 06 00 00 WOOD, PLASTICS AND COMPOSITES Section: 06 05 23 Wood, Plastic, and Composite

More information

Jay R. SMITH Mfg. Co.

Jay R. SMITH Mfg. Co. Jay R. SMITH Mfg. Co. STAINLESS STEEL Drainage Products Floor Drains Floor Sinks Cleanouts Trench Drains Engineered and Designed for Functionality by Jay R. Smith Mfg. Co. Index 9660 Modular Stainless

More information

INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR GLASS LAVATORIES, SINKS AND COUNTER TOPS IAPMO IGC

INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR GLASS LAVATORIES, SINKS AND COUNTER TOPS IAPMO IGC INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR GLASS LAVATORIES, SINKS AND COUNTER TOPS IAPMO IGC 172-200810 1. PURPOSE 1.1 The purpose of this standard is to establish

More information

C900/RJ. CertainTeed. PVC Pipe. with CertainTeed s proven Certa-Lok restrained joint system. Directional Drilling

C900/RJ. CertainTeed. PVC Pipe. with CertainTeed s proven Certa-Lok restrained joint system. Directional Drilling 1 1 CertainTeed C900/RJ PVC Pipe with CertainTeed s proven Certa-Lok restrained joint system Directional Drilling Underground Water Mains and Restrained, Non-Metallic Change-of-Direction Fittings (No Thrust

More information

SECTION SWIMMING POOLS STAINLESS, FULL TILE, OR TILE TRIM

SECTION SWIMMING POOLS STAINLESS, FULL TILE, OR TILE TRIM SECTION 13 1100 SWIMMING POOLS STAINLESS, FULL TILE, OR TILE TRIM This section includes editing notes to assist the user in editing the section to suit project requirements. These notes are included as

More information

ICC-ES Report. PMG-1009 Reissued 10/2017 This report is subject to renewal 10/2018 EPIPE EPOXY LINED PIPING SYSTEM ACE DURAFLO SYSTEMS, LLC

ICC-ES Report. PMG-1009 Reissued 10/2017 This report is subject to renewal 10/2018 EPIPE EPOXY LINED PIPING SYSTEM ACE DURAFLO SYSTEMS, LLC ICC-ES Report PMG-1009 Reissued 10/2017 This report is subject to renewal 10/2018 EVALUATION SUBJECT: EPIPE EPOXY LINED PIPING SYSTEM DIVISION: 22 00 00 PLUMBING SECTION: 22 11 16 DOMESTIC WATER PIPING

More information

STORM UTILITY WATER DRAINS

STORM UTILITY WATER DRAINS 1. Product Name ACO Drainª K100S General-Purpose Trench Drain ACO Drainª S100K Heavy Duty Trench Drain ACO Drainª S300K Heavy Duty Trench Drain ACO Drainª FG100 High Capacity Trench Drain ACO Drainª FG200

More information

R10 RAINWATER DRAINAGE SYSTEMS

R10 RAINWATER DRAINAGE SYSTEMS R10 RAINWATER DRAINAGE SYSTEMS To be read with Preliminaries/General conditions. GENERAL INFORMATION/REQUIREMENTS 110 GRAVITY RAINWATER DRAINAGE SYSTEM - Rainwater outlets: Proprietary (see clause 365)

More information

Drainage and Erosion Control

Drainage and Erosion Control Drainage and Erosion Control Erosion Control To order Straw Waddle 020897 Straw Waddle 9" x 25 Roll 14 Rolls/ None 140209 Wood Stakes 1" x 2" x 18" 50 Pcs./Bndl. None Straw fiber rolls that control erosion

More information

PMG LISTING CRITERIA FOR MULTILAYER PIPE AND FITTINGS ASSEMBLY FOR REFRIGERANT APPLICATIONS LC1036

PMG LISTING CRITERIA FOR MULTILAYER PIPE AND FITTINGS ASSEMBLY FOR REFRIGERANT APPLICATIONS LC1036 www.icc-es-pmg.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council PMG LISTING CRITERIA FOR MULTILAYER PIPE AND FITTINGS ASSEMBLY FOR REFRIGERANT APPLICATIONS LC1036 August

More information

The 2010 Revision to the ASTM B 813 Standard

The 2010 Revision to the ASTM B 813 Standard The 20 Revision to the ASTM B 813 Standard ASTM B 813- Plumbing or Mechanical systems are only as strong as the weakest joint ASTM B 813- The revisions to the ASTM B813 Standard are in General Requirements

More information

for plumbing regulations.

for plumbing regulations. CHAPTER 30 SANITARY DRAINAGE SECTION P3001 GENERAL P3001.1 Scope. The provisions of this chapter shall govern the materials, design, construction and installation of sanitary drainage systems. Plumbing

More information

SECTION DRAINAGE AND VENT SYSTEMS CONSTRUCTION STANDARD

SECTION DRAINAGE AND VENT SYSTEMS CONSTRUCTION STANDARD PART 1: GENERAL 1.01 The design guidelines contained herein include the requirements for drainage and vent systems utilized at The University of Texas at Austin. It is the intention of this document to

More information

CERTIFICATIONS AND LISTINGS

CERTIFICATIONS AND LISTINGS CERTIFICATIONS AND LISTINGS REHAU PEXa Tubing, Effective October 2017 TABLE OF CONTENTS Table 1: REHAU Certifications and Listings 1. REHAU PEX Tubing..................................4 2. Fire-rated Assembly

More information

Conformity assessment and ISO CASCO for standards writers

Conformity assessment and ISO CASCO for standards writers Conformity assessment and ISO CASCO for standards writers Content What is conformity assessment? What is ISO/CASCO? What is the ISO/CASCO Toolbox? ISO/IEC Directives, Part 2, Clause 6.7 What is conformity

More information

Fabrication and Installation Table of Contents

Fabrication and Installation Table of Contents Fabrication and Installation Table of Contents HDPE AQUASHIELD PRODUCTS 2 Fabrication and Installation 2 System Fabrication 3 Aqua-Swirl Installation 4 Step 1 Excavation and Bedding 4 Step 2 Pipe Connection

More information

PROACTIVE APPROACHES. for QUALITY MANAGEMENT. Anabela Martins Micoteca da Universidade do Minho

PROACTIVE APPROACHES. for QUALITY MANAGEMENT. Anabela Martins Micoteca da Universidade do Minho PROACTIVE APPROACHES for QUALITY MANAGEMENT Anabela Martins Micoteca da Universidade do Minho 1 Standard development procedure Reference sources Structure Interpreting the provisions Recognition scheme

More information

2012 VIRGINIA INDUSTRIALIZED BUILDING SAFETY REGULATIONS

2012 VIRGINIA INDUSTRIALIZED BUILDING SAFETY REGULATIONS 13VAC5-91-10. Definitions. The following words and terms when used in this chapter shall have the following meanings unless the context clearly indicates otherwise. Administrator means the Director of

More information

Storm Drainage Structures

Storm Drainage Structures Storm Drainage Structures Tomorrow s Drainage System Today A DIVISION OF ADVANCED DRAINAGE SYSTEMS, INC. ADVANCED DRAINAGE SYSTEMS, INC. The Preferred Solution for Storm Drainage Applications. About Nyloplast-ADS

More information

Residential Sewer Backup Prevention Program

Residential Sewer Backup Prevention Program City of Wheaton Residential Sewer Backup Prevention Program Please Note: The City reserves the right to modify the policies, procedures and rules of this program or discontinue the program in its entirety

More information

MASTER. Installation and Operation Manual. Water Conditioning Corp. DECHLOR Series Flow-Through Residential Carbon Filters.

MASTER. Installation and Operation Manual. Water Conditioning Corp. DECHLOR Series Flow-Through Residential Carbon Filters. MASTER Water Conditioning Corp. Installation and Operation Manual DECHLOR Series Flow-Through Residential Carbon Filters 2010 Version Table of Contents Page No. Topic Description 1 Model # and Packaging

More information

CI/SfB (52) Drainage Systems. frostdrainage.com

CI/SfB (52) Drainage Systems. frostdrainage.com CI/SfB (52) Drainage Systems frostdrainage.com Contents Introduction 3-7 What we do 3 Technical dvice and Support 4 dvantages of Frost Drainage Systems 5 Some UK Projects Some Worldwide Projects 7 Floor

More information

RAINWATER GLOSS & CAST IRON STYLE PVC GUTTER SYSTEMS

RAINWATER GLOSS & CAST IRON STYLE PVC GUTTER SYSTEMS www.brettmartin.com RAINWATER GLOSS & CAST IRON STYLE PVC GUTTER SYSTEMS QUALITY RAINWATER SYSTEMS Brett Martin s continued investment in product research, development and customer service has resulted

More information

MARLEY AKASISON SIPHONIC ROOF DRAINAGE

MARLEY AKASISON SIPHONIC ROOF DRAINAGE MARLEY AKASISON SIPHONIC ROOF DRAINAGE SPACE MATTERS The more space you have to work within a building project the more creative the design. Save space in your next building by specifying Marley Akasison

More information

AS/NZS :2003. Plumbing and drainage AS/NZS :2003. Australian/New Zealand Standard. Part 3: Stormwater drainage

AS/NZS :2003. Plumbing and drainage AS/NZS :2003. Australian/New Zealand Standard. Part 3: Stormwater drainage AS/NZS 3500.3:2003 Incorporating Amendment Nos 1, 2, and 3 Australian/New Zealand Standard Plumbing and drainage Part 3: Stormwater drainage AS/NZS 3500.3:2003 AS/NZS 3500.3:2003 This Joint Australian/New

More information

INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS UNIFORM EVALUATION SERVICES EVALUATION CRITERIA FOR

INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS UNIFORM EVALUATION SERVICES EVALUATION CRITERIA FOR INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS UNIFORM EVALUATION SERVICES EVALUATION CRITERIA FOR THE TESTING AND ANALYSIS OF STEEL SHEET SHEATHING FOR WOOD AND COLD FORMED STEEL LIGHT

More information

PMG-1039 Effective Date: April 1, 2014 This listing is subject to re-examination in one year.

PMG-1039 Effective Date: April 1, 2014 This listing is subject to re-examination in one year. ICC-ES PMG Listing PMG-1039 Effective Date: April 1, 2014 This listing is subject to re-examination in one year. www.icc-es-pmg.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code

More information

CHAPTER 7 SANITARY DRAINAGE SYSTEMS

CHAPTER 7 SANITARY DRAINAGE SYSTEMS PlumbingCode06_ch07 5/29/06 8:13 AM Page 1 CHAPTER 7 SANITARY DRAINAGE SYSTEMS Drainage systems intimidate many people. When these people look at their codebooks, they see charts and math requirements

More information

CATCH BASIN ST-1 ENGINEERING DEPARTMENT PLATE NUMBER 3.33' 3.0' 2.0' 4.33' 3.0' 4.0' 1.00' TO BACK OF CURB LINE

CATCH BASIN ST-1 ENGINEERING DEPARTMENT PLATE NUMBER 3.33' 3.0' 2.0' 4.33' 3.0' 4.0' 1.00' TO BACK OF CURB LINE 3.33' 3.0' 2.0' 4.33' 4.0' 3.0' 1.00' TO BACK OF CURB LINE TOP OF GRATE ELEV. - SEE PLAN NEENAH CASTING R-3067-V OR AS NOTED ON PLANS. "INFA-SHIELD" SEAL OR EQUAL. RINGS (2 MIN., 1' MAX. OF RINGS AND MORTAR).

More information

GUIDELINES FOR SEPTIC SYSTEM DESIGN

GUIDELINES FOR SEPTIC SYSTEM DESIGN GUIDELINES FOR SEPTIC SYSTEM DESIGN Single Family Residential For multi family or commercial buildings, Or If in the Oakdale area, contact the Department of Environmental Resources Regarding septic system

More information

What is No-Lead Brass...and how does it affect me?

What is No-Lead Brass...and how does it affect me? What is No-Lead Brass...and how does it affect me? A.Y. McDonald Mfg. Co. No-Lead Brass products meet the requirements of UNS Copper Alloy C89836 per ASTM B584-05 and Copper Alloy CDA No. C89833. UNS Copper

More information

ISO INTERNATIONAL STANDARD. Wood-based panels Oriented strand board (OSB) Definitions, classification and specifications

ISO INTERNATIONAL STANDARD. Wood-based panels Oriented strand board (OSB) Definitions, classification and specifications INTERNATIONAL STANDARD ISO 16894 First edition 2009-11-15 Wood-based panels Oriented strand board (OSB) Definitions, classification and specifications Panneaux à base de bois Panneaux de lamelles minces,

More information

Amalie Arena Sixth Floor East Roof Replacement

Amalie Arena Sixth Floor East Roof Replacement Amalie Arena Sixth Floor East Roof Replacement 401 Channelside Drive Tampa, Florida 33602 February 18, 2016 ROOF ENGINEERING ASSOCIATES, INC. 500 County Road One, P.O. Box 549 Palm Harbor, FL 34682-0549

More information

Originally Issued: 03/13/2015 Revised: 03/10/2017 Valid Through: 03/31/ Description

Originally Issued: 03/13/2015 Revised: 03/10/2017 Valid Through: 03/31/ Description EVALUATION SUBJECT: TILE FLASHING SYSTEM REPORT HOLDER: EcoFasten Solar 4741 W. Polk Street, Ste. 4 Phoenix, AZ 85043 Phone: 888-766-4273 brian@alpinesnowguards.com CSI DIVISION: 06 WOOD AND PLASTICS CSI

More information

ISO/IEC INTERNATIONAL STANDARD. Conformity assessment General requirements for third-party marks of conformity

ISO/IEC INTERNATIONAL STANDARD. Conformity assessment General requirements for third-party marks of conformity INTERNATIONAL STANDARD ISO/IEC 17030 First edition 2003-10-01 Conformity assessment General requirements for third-party marks of conformity Évaluation de la conformité Exigences générales pour les marques

More information

SECTION Domestic Water Piping. A. American National Standards Institute (ANSI)/American Water Works Association (AWWA)

SECTION Domestic Water Piping. A. American National Standards Institute (ANSI)/American Water Works Association (AWWA) SECTION 22 11 16 Domestic Water Piping PART 1 GENERAL 1.1 SECTION INCLUDES A. PEX a tubing and fittings for domestic water piping. 1.2 REFERENCES A. American National Standards Institute (ANSI)/American

More information

2015 IBC Chapters 1 and 35

2015 IBC Chapters 1 and 35 Study Session 1 2015 IBC Chapters 1 and 35 Administration OBJECTIVE: To obtain an understanding of the administrative provisions of the International Building Code Ò (IBC Ò ), including the scope and purpose

More information

MODELS PH PH PH

MODELS PH PH PH WWW.BURCAM.COM 2190 Boul. Dagenais West TEL: 514.337.4415 LAVAL (QUEBEC) FAX: 514.337.4029 CANADA H7L 5X9 info@burcam.com Your pump has been carefully packaged at the factory to prevent damage during shipping.

More information

A. Codes and Standards that are Standards at the University. A. Provide floor drains in all toilet rooms, janitor closets, and mechanical rooms.

A. Codes and Standards that are Standards at the University. A. Provide floor drains in all toilet rooms, janitor closets, and mechanical rooms. PART 1: GENERAL 1.01 Purpose A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is

More information

Specification Drainage Engineering Guide. Hydrants.

Specification Drainage Engineering Guide. Hydrants. Specification Drainage Engineering Guide Hydrants www.zurn.com APPLICATION INDEX WALL HYDRANTS NON-FREEZE/SELF-DRAINING MODERATE CLIMATE Retail Outlets Z1300, Z1305, Z1310, Z1320 Z1330, Z1335 Office Buildings

More information

D I S T R I B U T E D V A L V E S. TECHNO Multi-Purpose Check Valves for Industry TECHNO

D I S T R I B U T E D V A L V E S. TECHNO Multi-Purpose Check Valves for Industry TECHNO TM TECHNO Multi-Purpose Check Valves for Industry THE SHORT FORM (SF) WAFER IS THE PERFECT DESIGN FOR AIR SERVICE AND LIGHT DUTY LIQUID APPLICATIONS. AVAILABLE IN SIZES 1-72 MALE THREADED ENDS, GROOVED

More information

EVALUATION SUBJECT: AQUATECHNIK GAS PEX-AL-PEX PIPE AND FITTING SYSTEM

EVALUATION SUBJECT: AQUATECHNIK GAS PEX-AL-PEX PIPE AND FITTING SYSTEM ICC-ES Report PMG-1438 Issued 08/2017 This report is subject to renewal 08/2018 EVALUATION SUBJECT: AQUATECHNIK GAS PEX-AL-PEX PIPE AND FITTING SYSTEM DIVISION: 23 00 00 HEATING, VENTILATING AND AIR CONDITIONING

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS 2190 Dagenais Blvd.West Laval (Quebec) Canada H7L 5X9 Tel. : 514.337.4415 Fax : 514.337.4029 info@burcam.com see us at www.burcam.com VERSION Z MODELS 300500 SUMP PUMPS Your pump

More information

Hydrodynamic Separation Product Calculator

Hydrodynamic Separation Product Calculator Hydrodynamic Separation Product Calculator Example Project BMP #1 CDS 2015-4 Project Information Project Name Example Project Option # A Country US State Kentucky City Covington Contact Information First

More information

IB Series I-Joists International Beams, Inc. Revised June 25, 2014

IB Series I-Joists International Beams, Inc. Revised June 25, 2014 IB Series I-s PR-L252 International Beams, Inc. Revised June 25, 2014 Products: IB400, 600, 800 and 900 Prefabricated Wood I-s International Beams, Inc., 2010 Bld St-Elzear West, Laval, Quebec, H7L 4A8,

More information

EVALUATION SUBJECT: HAMMERHEAD CURED-IN- PLACE PIPE (CIPP) LINING SYSTEM DIVISION: PLUMBING SECTION: SANITARY WASTE AND VENT PIPING

EVALUATION SUBJECT: HAMMERHEAD CURED-IN- PLACE PIPE (CIPP) LINING SYSTEM DIVISION: PLUMBING SECTION: SANITARY WASTE AND VENT PIPING ICC-ES Report PMG-1273 Reissued 01/2018 This report is subject to renewal 01/2019 EVALUATION SUBJECT: HAMMERHEAD CURED-IN- PLACE PIPE (CIPP) LINING SYSTEM DIVISION: 22 00 00 PLUMBING SECTION: 22 13 16

More information

EVALUATION SUBJECT: EPA WATERSENSE - HYDROPOINT WEATHER-BASED IRRIGATION CONTROLLERS

EVALUATION SUBJECT: EPA WATERSENSE - HYDROPOINT WEATHER-BASED IRRIGATION CONTROLLERS ICC-ES Report PMG-1153 Reissued 11/2017 This report is subject to renewal 11/2018 EVALUATION SUBJECT: EPA WATERSENSE - HYDROPOINT WEATHER-BASED IRRIGATION CONTROLLERS DIVISION: 22 00 00 PLUMBING SECTION:

More information

Originally Issued: 05/03/2013 Revised: 06/06/2016 Valid Through: 05/31/2017

Originally Issued: 05/03/2013 Revised: 06/06/2016 Valid Through: 05/31/2017 EVALUATION SUBJECT: AA-2 VAPOR SHIELD, M-SHIELD, SILVER SHIELD RADIANT BARRIER, FSK SHIELD, RBI SHIELD AND VR PLUS SHIELD REPORT HOLDER: Fi-Foil Company, Inc. P.O. Box 800 612 Bridgers Ave. West Auburndale,

More information

Section Domestic Water Piping (Hot and Cold Water Potable Water Distribution)

Section Domestic Water Piping (Hot and Cold Water Potable Water Distribution) Domestic Water Piping 22 11 16 Uponor, Inc. 5925 148th Street West Apple Valley, MN 55124 Toll Free: (800) 321-4739 Phone: (952) 891-2000 Fax: (952) 891-2008 www.uponor-usa.com This specification is a

More information

IPEX Solvent Cements Catalogue

IPEX Solvent Cements Catalogue IPEX Solvent Cements Catalogue I P E X S O L V E N T C E M E N T S CEMENTS, PRIMERS & APPLICATORS for Industrial, Mechanical, Plumbing and Electrical Piping systems. Choosing the correct SOLVENT CEMENT

More information

Originally Issued: 12/12/2014 Revised: 12/29/2017 Valid Through: 12/29/2018

Originally Issued: 12/12/2014 Revised: 12/29/2017 Valid Through: 12/29/2018 Originally Issued: 12/12/2014 Revised: 12/29/2017 Valid Through: 12/29/2018 TK Products A Division of Sierra Corporation TK-HYDROMAX 2001 SB DAMPPROOF COATING, TK-HYDROMAX 2002 SB FOUNDATION WATERPROOF

More information

Precast Concrete Trench Drain Systems

Precast Concrete Trench Drain Systems Precast Concrete Trench Drain Systems HYDROblock - HYDROblock 100: 4 Internal Width - HYDROblock 200: 8 Internal Width - HYDROblock 300: 12 Internal Width One Piece Ductile Iron Trench Drain About SIGMA

More information

300828TWP INSTALLATION INSTRUCTIONS MODEL SUBMERSIBLE SUMP PUMP

300828TWP INSTALLATION INSTRUCTIONS MODEL SUBMERSIBLE SUMP PUMP www.burcam.com 2190 Dagenais Blvd. West TEL : 514.337.4415 LAVAL (QUEBEC) FAX : 514.337.4029 CANADA H7L 5X9 info@burcam.com Your pump has been carefully packaged at the factory to prevent damage during

More information

CHAPTER 12 BRIDGE DECK DRAINAGE SYSTEMS

CHAPTER 12 BRIDGE DECK DRAINAGE SYSTEMS OFFICE OF STRUCTURES MANUAL FOR HYDROLOGIC AND HYDRAULIC DESIGN CHAPTER 12 BRIDGE DECK DRAINAGE SYSTEMS APRIL 2011 APRIL 2011 Page 1 Chapter Table of Contents 12.1 Policy... 12-3 12.1.1 Table 1... 12-3

More information

DIVISION 3: SEWER. Improvement Design Standards City of Dundee Oregon. Division 3 : Sewer Page 1

DIVISION 3: SEWER. Improvement Design Standards City of Dundee Oregon. Division 3 : Sewer Page 1 DIVISION 3: SEWER 3.1 DESIGN CRITERIA A. APPLICABILITY 1. These Design Standards shall govern all construction and upgrading of public sanitary sewer facilities in the City of Dundee and applicable work

More information

IAF MLA Document. Guidance for the Exchange of Documentation among MLA Signatories for the Assessment of Conformity Assessment Bodies.

IAF MLA Document. Guidance for the Exchange of Documentation among MLA Signatories for the Assessment of Conformity Assessment Bodies. IAF MLA Document Guidance for the Exchange of Documentation among MLA Signatories for the Assessment of Conformity Assessment Bodies Issue 3 (IAF ML 1:2016) Issue 3 Guidance for the Exchange of Documentation

More information

ISO /TS 29001:2010 SYSTEMKARAN ADVISER & INFORMATION CENTER SYSTEM KARAN ADVISER & INFORMATION CENTER

ISO /TS 29001:2010 SYSTEMKARAN ADVISER & INFORMATION CENTER SYSTEM KARAN ADVISER & INFORMATION CENTER SYSTEM KARAN ADVISER & INFORMATION CENTER PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES -- SECTOR-SPECIFIC QUALITY MANAGEMENT SYSTEMS -- REQUIREMENTS FOR PRODUCT AND SERVICE SUPPLY ORGANIZATIONS

More information

GUIDE SPECIFICATIONS CURA ADJUSTABLE REROOF FRAMING SYSTEMS SECTION REROOFING ADJUSTABLE FRAMING SYSTEM

GUIDE SPECIFICATIONS CURA ADJUSTABLE REROOF FRAMING SYSTEMS SECTION REROOFING ADJUSTABLE FRAMING SYSTEM - --- -- ----..-------~------------------------------------ GUIDE SPECIFICATIONS CURA ADJUSTABLE REROOF FRAMING SYSTEMS SECTION 07415 REROOFING ADJUSTABLE FRAMING SYSTEM PART 1 - GENERAL 1.01 SCOPE A.

More information

SECTION PLUMBING PIPING SYSTEMS

SECTION PLUMBING PIPING SYSTEMS SECTION 15300 PLUMBING PIPING SYSTEMS PART 1 - GENERAL 1.01 SPECIAL NOTICE A. Each contractor shall read all relevant documents, become familiar with the job, the scope of work, type of general construction,

More information

2004 NBIC Interpretations

2004 NBIC Interpretations 2004 NBIC Interpretations INTERPRETATION 04-23 Subject: Part RC 1110, RC-2050(c), RC-3030(c), RC-3031(e) Question 1: Does RC-1110 specifically require acceptance of the jurisdiction for alternative NDE

More information

SECTION FACILITY STORM DRAINAGE

SECTION FACILITY STORM DRAINAGE SECTION 22 14 00 FACILITY STORM DRAINAGE PART 1 - GENERAL 1.1 DESCRIPTION SPEC WRITER NOTE: Delete between //----// if not applicable to project. Also delete any other item or paragraph not applicable

More information

SECTION FACILITY SANITARY SEWERS

SECTION FACILITY SANITARY SEWERS SECTION 22 1313 FACILITY SANITARY SEWERS PART 1 - GENERAL 1.1 SUMMARY A. Includes But Not Limited To: 1. Furnish and install soil, waste, and vent piping systems within building and connect with outside

More information

Total Performance WARRANTY for T. Clear Roofing Products. For a period of ten (10) years from the date of completion (

Total Performance WARRANTY for T. Clear Roofing Products. For a period of ten (10) years from the date of completion ( Total Performance WARRANTY for T. Clear Roofing Products For a period of ten (10) years from the date of completion ( ), Clear warrants: a) that the roof will remain in a water-tight condition; and b)

More information

recycle water reuse it save up to from showers & baths for flushing toilets 30% of water use

recycle water reuse it save up to from showers & baths for flushing toilets 30% of water use Residential recycle - Water reuse Recovery - save recycle water from showers & baths reuse it for flushing toilets save up to 30% of water use www.recoverwater.com How it works Greywater is lightly soiled

More information

SECTION PLUMBING PIPING SYSTEMS. A. Types of plumbing piping systems specified in this section include the following:

SECTION PLUMBING PIPING SYSTEMS. A. Types of plumbing piping systems specified in this section include the following: SECTION 15400 PART I - GENERAL 1.01 WORK INCLUDED A. Types of plumbing piping systems specified in this section include the following: 1. Water Piping 2. Building Drain Piping 3. Rainwater Piping 4. Storm

More information

The better way to build TM. Installation Manual FOUNDATION SIPs & FROST WALLS SIPs

The better way to build TM. Installation Manual FOUNDATION SIPs & FROST WALLS SIPs The better way to build TM Installation Manual FOUNDATION SIPs & FROST WALLS SIPs November 2016 PWF FOUNDATION & FROST WALL SIPs Installation Manual Table of Contents Topics General Requirements....................................

More information

SECTION PACKAGE BOOSTER PUMP STATIONS

SECTION PACKAGE BOOSTER PUMP STATIONS SECTION 331223 PACKAGE BOOSTER PUMP STATIONS Scope: The Contractor shall install a pump station at two locations to be determined by the Owner. These pump stations shall be designed to deliver flow to

More information

PR-L274C Nordic Structures Revised April 16, 2017

PR-L274C Nordic Structures Revised April 16, 2017 Nordic TM PR-L274C Nordic Structures Revised April 16, 2017 Products: NI-20, 40, 40x, 60, 70, 80, 80x, 90, and 90x Prefabricated Wood I-s Nordic Structures 1100 Avenue des Canadiens-de-Montréal, Suite

More information

SAN FRANCISCO UNIFIED SCHOOL DISTRICT FACILITIES, DESIGN AND CONSTRUCTION ADDENDUM NO. 1

SAN FRANCISCO UNIFIED SCHOOL DISTRICT FACILITIES, DESIGN AND CONSTRUCTION ADDENDUM NO. 1 SAN FRANCISCO UNIFIED SCHOOL DISTRICT FACILITIES, DESIGN AND CONSTRUCTION ADDENDUM NO. 1 PROJECT: OWNER: Shell and Core Improvements-1235 Mission Scope 3: Roofs 1 & 3 DATE: December 29, 2017 1235 Mission

More information

Article 10 - ADMINISTRATIVE SECTION

Article 10 - ADMINISTRATIVE SECTION Article 10 - ADMINISTRATIVE SECTION 10.1 TITLE These Administrative Regulations along with the requirements included in the 2005 Edition of the National Electrical Code (NFiPA-70-2005) as approved by the

More information